Much of the code in PltSection and IPltSection is similar, we identify
the IPlt by a HeaderSize of 0 and alter our behaviour in the member
functions appropriately:
-Iplt does not have a header
-Iplt always follows after the Plt
Differential Revision: https://reviews.llvm.org/D29664
llvm-svn: 294579
When we need a copy relocation we create a synthetic SHT_NOBITS
section that contains the right amount of ZI and assign it to either
.bss or .rel.ro.bss as appropriate. This allows the dynamic relocation
to be placed on the InputSection, removing the last case where a
dynamic relocation is stored as an offset from the OutputSection. This
has the side effect that we can run assignOffsets() after scanRelocs()
without losing the additional ZI needed for the copy relocations.
Differential Revision: https://reviews.llvm.org/D29637
llvm-svn: 294577
Fix the test zlib conditional to use LLVM_ENABLE_ZLIB value when
building stand-alone. The HAVE_LIBZ is not available when performing
a stand-alone build. Since the zlib support is a feature of
the underlying LLVM library, it exports the actual status as the final
value of LLVM_ENABLE_ZLIB in LLVMConfig.
While at it, canonicalize the boolean value into 0/1 and remove unused
CMake definitions (most likely copied from clang).
Differential Revision: https://reviews.llvm.org/D29340
llvm-svn: 294508
Use both LLD- and LLVM-specific binary&library directories when LLD is
being built stand-alone. This ensures that the freshly built tools and
libraries are found and used correctly.
Without this patch, the test suite uses LLVM_TOOLS_DIR and LLVM_LIBS_DIR
to locate lld, and set PATH and LD_LIBRARY_PATH. When doing
a stand-alone builds, these variables represent the installed LLVM.
As a result, tests either fail due to missing lld executables/libraries
or use an earlier installed LLD version rather than the one being built.
To solve this, an additional LLD_TOOLS_DIR and LLD_LIBS_DIR variables
are added that are populated using LLVM_*_OUTPUT_INTDIR. Those variables
are populated with directories used to output built executables
and libraries. In stand-alone builds, they represent the directories
used by LLD. In integrated builds, they have the same values as
LLVM_*_DIR and therefore using them does not harm.
The new variables are prepended to PATH and LD_LIBRARY_PATH to ensure
that freshly built binaries are preferred over potentially earlier
installed ones. Furthermore, the resulting PATH is used to locate tools
for substitutions since the search includes both tools built as part of
LLD and of LLVM.
Differential Revision: https://reviews.llvm.org/D29335
llvm-svn: 294507
The test is failing on the bot because "/subsystem:console" was
truncated for some reason. I don't know why that is happening on
that machine (it is not reproducible on my Windows machine).
In this patch, I'm trying to tame it by making the output shorter.
llvm-svn: 294502
Summary: This adds an option to save temporary files generated during link-time optimization. This can be useful for debugging.
Reviewers: ruiu, pcc
Reviewed By: ruiu, pcc
Subscribers: mehdi_amini
Differential Revision: https://reviews.llvm.org/D29518
llvm-svn: 294498
with temporarily file name fix in testcase.
Original commit message:
-q, --emit-relocs - Generate relocations in output
Simplest implementation:
* no GC case,
* no "/DISCARD/" linkerscript command support.
This patch is extracted from D28612 / D29636,
Relative to PR31579.
Differential revision: https://reviews.llvm.org/D29663
llvm-svn: 294469
-q, --emit-relocs - Generate relocations in output
Simplest implementation:
* no GC case,
* no "/DISCARD/" linkerscript command support.
This patch is extracted from D28612 / D29636,
Relative to PR31579.
Differential revision: https://reviews.llvm.org/D29663
llvm-svn: 294464
OUTPUT_ARCH command can contain architecture values separated with ":", like:
OUTPUT_ARCH(i386:x86-64)
We did not support that, because got 3 lexer tokens here after recent changes.
This trivial patch fixes the issue, now whole expression inside
OUTPUT_ARCH is just ignored.
Differential revision: https://reviews.llvm.org/D29640
llvm-svn: 294432
LLD already parses ALIGN expression to specifiy alignment for output
sections in linker scripts but it never applies the alignment to the
output section. This change handles that.
Differential Revision: https://reviews.llvm.org/D29689
llvm-svn: 294374
DefinedSynthetic symbols are attached to sections,
for the case when such symbol was attached to non-allocated section,
we calculated its value incorrectly.
We subtracted Body->Section->Addr, but non-allocatable sections
should have zero VA in output and therefore result value was wrong.
And at the same time we have Body->Section->Addr != 0 for them
internally because use it for calculation of section size.
Patch fixes calculation of such symbols values.
Differential revision: https://reviews.llvm.org/D29653
llvm-svn: 294322
We had assignSymbol and assignSectionSymbol methods which has similar functionality.
Patch removes one of copy and reuses another in code.
Differential revision: https://reviews.llvm.org/D29582
llvm-svn: 294290
Previously we did not do that. For example, for R_386_PC8,
0xFF addend was not treated as 0xFFFFFFFF(-1),
but was 0x000000FF.
Recently added checks for R_386_PC8/R_386_PC16 failed because of calculation
overflow as a result.
Differential revision: https://reviews.llvm.org/D29490
llvm-svn: 294289
If `/debugtypes` is used to omit the codeview information, we would not
have constructed the debug info codeview record which is used to tie the
PDB to the binary. In such a case, rub out the GUID and Age fields.
llvm-svn: 294279
If relocations don't have addends, addends are embedded in operands.
getImplicitAddend is a function to read addends. Addends can be
negative numbers, so the return type of the function should be a
signed integer type.
llvm-svn: 294253
We now create a dummy section with index 1 before processing the
linker script.
Thanks to George Rimar for finding the bug and providing the initial
testcase.
llvm-svn: 294252
This patch defines a new command line option, /MSVCLTO, to LLD.
If that option is given, LLD invokes link.exe to link LTO-generated
object files. This is hacky but useful because link.exe can create
PDB files.
Differential Revision: https://reviews.llvm.org/D29526
llvm-svn: 294234
This is a fix for Bugzilla 31813.
The problem is that the tokenizer does not create a separate token for
":" unless there's white space before it. Changed it to always create
a token for ":" and reworked some logic that relied on ":" being
attached to some tokens like "global:" and "local:".
llvm-svn: 294006
With a synthetic merge section we can have, for example, a single
.rodata section with stings, fixed sized constants and non merge
constants.
I can be simplified further by not setting Entsize, but that is
probably better done is a followup patch.
This should allow some cleanup in the linker script code now that
every output section command maps to just one output section.
llvm-svn: 294005
This reverts commit r293970.
After more discussion, this belongs to the linker side and
there is no added value to do it at this level.
llvm-svn: 293993
When a symbol is not exported outside of the
DSO, it is can be hidden. Usually we try to internalize
as much as possible, but it is not always possible, for
instance a symbol can be referenced outside of the LTO
unit, or there can be cross-module reference in ThinLTO.
This is a recommit of r293912 after fixing build failures,
and a recommit of r293918 after fixing LLD tests.
Differential Revision: https://reviews.llvm.org/D28978
llvm-svn: 293970
Summary: The COFF linker previously implemented link-time optimization using an API which has now been marked as legacy. This change refactors the COFF linker to use the new LTO API, which is also used by the ELF linker.
Reviewers: pcc, ruiu
Reviewed By: pcc
Subscribers: mgorny, mehdi_amini
Differential Revision: https://reviews.llvm.org/D29059
llvm-svn: 293967
Summary: llvm/CodeGen/CommandFlags.h a utility function InitTargetOptionsFromCodeGenFlags which is used to set target options from flags based on the command line. The command line flags are stored in globals defined in the same file, and including the file in multiple places causes the globals to be defined multiple times, leading to linker errors. This change adds a single place in lld where these globals are defined and exports only the utility function. This makes it possible to call InitTargetOptionsFromCodeGenFlags from multiple places in lld, which a follow-up change will do.
Reviewers: davide, ruiu
Reviewed By: davide, ruiu
Subscribers: mgorny
Differential Revision: https://reviews.llvm.org/D29058
llvm-svn: 293965
Instead of creating multiple PHDRs in a single loop, this patch
runs one for loop for each PHDR type. I think this improves code
readability.
llvm-svn: 293832
