This change adds checks before dereferencing a pointer returned from a
function.
Differential Revision: https://reviews.llvm.org/D62224
llvm-svn: 362111
The omp_taskloop_num_tasks and omp_taskwait have deadlooped
on the NetBSD buildbot previously, practically hanging the host running
it. Disable them until we can find a good solution, or make the kernel
less fragile.
llvm-svn: 361825
This change adds implementation to ompt_finalize_tool() and
ompt_get_task_memory().
Patch by Hansang Bae
Differential Revision: https://reviews.llvm.org/D61657
llvm-svn: 361309
https://reviews.llvm.org/D58454 did not fix the problem for a typical use
case of building LLVM with gcc or icc and then testing with the newly built
clang compiler.
The compilers do not agree on how to extend a 32-bit pointer to uint64, so
make the pointer unsigned first, before adjusting the size.
Patch by Joachim Protze
Differential Revision: https://reviews.llvm.org/D58506
llvm-svn: 361158
OpenMP 5.0 says that the callback for the events initial-task-begin and
initial-task-end has to be ompt_callback_implicit_task.
Patch by Tim Cramer
Differential Revision: https://reviews.llvm.org/D58776
llvm-svn: 361157
Added synchronization for possible concurrent initialization of mutexes
by multiple threads. The need of synchronization caused by commit r357927
which added the use of mutexes at threads movement to/from common pool
(earlier the mutexes were used only at suspend/resume).
Patch by Johnny Peyton.
Differential Revision: https://reviews.llvm.org/D61995
llvm-svn: 360919
Currently cores within package that share the same L2 cache are grouped together.
The current logic behind this assumes that the L2 cache is always at deeper
(or the same) level than the package itself. In case when L2 cache is common
for all packages (and the packages are at deeper level than L2 cache) the whole of
the further topology discovery fails to find any computational units resulting in
following assertion:
Assertion failure at kmp_affinity.cpp(715): nActiveThreads == __kmp_avail_proc.
OMP: Error #13: Assertion failure at kmp_affinity.cpp(715).
This patch adds a bit of a logic that prevents such situation from occurring.
Differential Revision: https://reviews.llvm.org/D61796
llvm-svn: 360890
Removed unconditional and unsafe decrement of counter
of active threads in pool at shutdown time.
Differential Revision: https://reviews.llvm.org/D61944
llvm-svn: 360784
The implementation should be done by compiler, user can only declare
objects of this type and use them in OpenMP directives.
Differential Revision: https://reviews.llvm.org/D61860
llvm-svn: 360774
The code is currently using the ambiguous instruction
"sub sp, sp, w9, lsl #4". The ARM reference manual says this isn't
valid, and it's not clear whether it's supposed to mean uxtw or uxtx.
It doesn't matter which instruction we use here, since the high
bits of the operand are zero anyway, so I arbitrarily choose uxtw, to
preserve the register name.
See https://reviews.llvm.org/D60840 for the LLVM patch.
Differential Revision: https://reviews.llvm.org/D61770
llvm-svn: 360711
Changed file extension of the destination of the copy of libomp.lib
(it was mistakely .dll, now it is .lib) in installation on Windows.
Differential Revision: https://reviews.llvm.org/D61673
llvm-svn: 360595
This patch provides workaround to allow gfortran to compile the
OpenMP Fortran modules.
From the gfortran manual:
https://gcc.gnu.org/onlinedocs/gcc-9.1.0/gfortran/BOZ-literal-constants.html
"Note that initializing an INTEGER variable with a statement such as
DATA i/Z'FFFFFFFF'/ will give an integer overflow error rather than the desired
result of -1 when i is a 32-bit integer on a system that supports 64-bit
integers. The -fno-range-check option can be used as a workaround for legacy
code that initializes integers in this manner."
Bug filed: https://bugs.llvm.org/show_bug.cgi?id=41755
Differential Revision: https://reviews.llvm.org/D61603
llvm-svn: 360299
Summary:
To be able to successfully build OpenMP on FreeBSD/i386, which still
uses i486 as its default processor, I had to provide wrappers for the
`__kmp_load_mxcsr` and `__kmp_store_mxcsr` functions.
If the compiler signals that SSE is not available, loading and storing
mxcsr does not make sense anway, so in that case the inline functions
are empty. This gives the minimum amount of code churn.
See also https://svnweb.freebsd.org/changeset/base/345283
Reviewers: emaste, jlpeyton, Hahnfeld
Reviewed By: jlpeyton
Subscribers: hfinkel, krytarowski, jdoerfert, openmp-commits, llvm-commits
Tags: #openmp
Differential Revision: https://reviews.llvm.org/D60916
llvm-svn: 360062
Summary:
To be able to successfully build OpenMP on 32-bit FreeBSD, such as
FreeBSD/i386, I first had to provide a few wrappers (see D60916), and
then add `KMP_OS_FREEBSD` to the list of defines checked for 32-bit
architectures in `kmp_runtime.cpp`.
I have successfully built libomp.so and ran a bunch of test programs on
FreeBSD/i386 with this.
See also https://svnweb.freebsd.org/changeset/base/345283
Reviewers: emaste, jlpeyton, Hahnfeld
Reviewed By: jlpeyton
Subscribers: krytarowski, guansong, jdoerfert, openmp-commits, llvm-commits
Tags: #openmp
Differential Revision: https://reviews.llvm.org/D60917
llvm-svn: 359716
Implemented task modifier in two versions - one without taking into account
omp_orig variable (the omp_orig still can be processed by compiler without help
of the library, but each reduction object will need separate initializer with
global access to omp_orig), another with omp_orig variable included into
interface (single initializer can be used for multiple reduction objects of
the same type). Second version can be used when the omp_orig is not globally
accessible, or to optimize code in case of multiple reduction objects
of the same type.
Patch by Andrey Churbanov
Differential Revision: https://reviews.llvm.org/D60976
llvm-svn: 359710
This patch adds:
* New omp_sched_monotonic flag to omp_sched_t which is handled within the runtime
* Parsing of monotonic/nonmonotonic in OMP_SCHEDULE
* Tests for the monotonic flag and envirable parsing
* Logic to force monotonic when hierarchical scheduling is used
Differential Revision: https://reviews.llvm.org/D60979
llvm-svn: 359601
Summary:
I ran into some issues after rOMP355687, where __atomic_fetch_add was
being used incorrectly on x86, and this turns out to be caused by the
following added conditionals:
```
#if defined(KMP_ARCH_MIPS)
```
The problem is, these macros are always defined, and are either 0 or 1
depending on the architecture. E.g. the correct way to test for MIPS
is:
```
#if KMP_ARCH_MIPS
```
Reviewers: petarj, jlpeyton, Hahnfeld, AndreyChurbanov
Reviewed By: petarj, AndreyChurbanov
Subscribers: AndreyChurbanov, sdardis, arichardson, atanasyan, jfb, jdoerfert, openmp-commits, llvm-commits
Tags: #openmp
Differential Revision: https://reviews.llvm.org/D60938
llvm-svn: 358911
This change replaces some of the assembly functions in z_Linux_asm.S
for inline asm in kmp.h. This allows better interaction with compiler
tools and sanitizers.
Differential Revision: https://reviews.llvm.org/D60423
llvm-svn: 358438
* Replace HBWMALLOC API with more general MEMKIND API, new functions
and variables added.
* Have libmemkind.so loaded when accessible.
* Redirect memspaces to default one except for high bandwidth which
is processed separately.
* Ignore some allocator traits e.g., sync_hint, access, pinned, while
others are processed normally e.g., alignment, pool_size, fallback,
fb_data, partition.
* Add tests for memory management
Patch by Andrey Churbanov
Differential Revision: https://reviews.llvm.org/D59783
llvm-svn: 357929
This patch cleans up the bookkeeping code for the load balancing dynamic mode.
When a thread is moved to or from the thread pool, the th_active_in_pool flag
and the __kmp_thread_pool_active_nth global counter are both updated. This
removes the need for the corrective code in the main wait loop. Another global
counter, __kmp_thread_pool_nth, was removed completely, as it was only used for
debugging, but was not under KMP_DEBUG.
Patch by Terry Wilmarth
Differential Revision: https://reviews.llvm.org/D59508
llvm-svn: 357927
Debug dump on large machine shows when many OpenMP threads (401 in total)
sleep on a barrier, one of the innermost nesting levels sleeps
on a child's b_arrived flag whose value is equal to 4 and is equal to
checker value. i.e., (1) sleep bit is 0, and (2) done_check() would
return true if called.
It is unclear how this might happen. It could be Windows Server 2016's
error of EnterCriticalSection / LeaveCriticalSection, or
error of WaitForSingleObject / SetEvent / ResetEvent, or
error in the library which is very difficult to find.
As a workaround, change INFINITE wait to timed wait, so that each
thread awakens each 5 seconds (the timeout was chosen arbitrary to not
disturb other threads much), check flag condition under the lock, and
either go to sleep again or stop sleeping as a result of the check.
Patch by Andrey Churbanov
Differential Revision: https://reviews.llvm.org/D59793
llvm-svn: 357722
The distribute clause needs an explicit push of a timer. The teams
clause needs a timer added and also, similarly to parallel, exchanged
with the serial timer when encountered so that serial regions are
counted properly.
Differential Revision: https://reviews.llvm.org/D59801
llvm-svn: 357621
On most platforms, certain compiler and linker flags have to be passed
when using pthreads, otherwise linking against libomp.so might fail with
undefined references to several pthread functions.
Use CMake's `find_package(Threads)` to determine these for standalone
builds, or take them (and optionally modify them) from the top-level
LLVM cmake files.
Also, On FreeBSD, ensure that libomp.so is linked against libm.so,
similar to NetBSD.
Adjust test cases with hardcoded `-lpthread` flag to use the common
build flags, which should now have the required pthread flags.
Reviewers: emaste, jlpeyton, krytarowski, mgorny, protze.joachim, Hahnfeld
Reviewed By: Hahnfeld
Subscribers: AndreyChurbanov, tra, EricWF, Hahnfeld, jfb, jdoerfert, openmp-commits
Tags: #openmp
Differential Revision: https://reviews.llvm.org/D59451
llvm-svn: 357618
Summary:
While building the 8.0 releases on FreeBSD, I encountered the following
error in the regression tests, where ompt/misc/interoperability.cpp
failed to compile, with:
```
projects/openmp/runtime/test/ompt/misc/interoperability.cpp:7:10: fatal error: 'alloca.h' file not found
#include <alloca.h>
^~~~~~~~~~
```
Like on NetBSD, alloca(3) is defined in <stdlib.h> instead.
Reviewers: emaste, jlpeyton, krytarowski, mgorny, protze.joachim
Reviewed By: jlpeyton
Subscribers: jdoerfert, openmp-commits
Tags: #openmp
Differential Revision: https://reviews.llvm.org/D59736
llvm-svn: 356936
Summary:
[Split off from D59451 to get this fix in separately]
While building the 8.0 releases on FreeBSD, I encountered the following
warnings in openmp quite a few times:
```
In file included from projects/openmp/runtime/src/kmp_settings.cpp:27:
projects/openmp/runtime/src/kmp_wrapper_getpid.h:35:2: warning: #warning is a language extension [-Wpedantic]
#warning No gettid found, use getpid instead
^
projects/openmp/runtime/src/kmp_wrapper_getpid.h:35:2: warning: No gettid found, use getpid instead [-W#warnings]
2 warnings generated.
```
I added a gettid wrapper that uses FreeBSD's pthread_getthreadid_np(3)
function for this.
Reviewers: emaste, jlpeyton, krytarowski, mgorny, protze.joachim
Reviewed By: jlpeyton
Subscribers: jfb, jdoerfert, openmp-commits
Tags: #openmp
Differential Revision: https://reviews.llvm.org/D59735
llvm-svn: 356934
The GOMP sections interface uses schedule(dynamic) dispatch so it cannot
be assumed which thread executes the cancel and which thread executes
the cancellation point. This patch allows either thread to execute either
section.
llvm-svn: 356302
The following GCC intrinsics are not available on MIPS32:
__sync_fetch_and_add_8
__sync_fetch_and_and_8
__sync_fetch_and_or_8
__sync_val_compare_and_swap_8
Replace these with appropriate libatomic implementation.
Patch by Miodrag Dinic.
Differential Revision: https://reviews.llvm.org/D45691
llvm-svn: 355687
Changing the default from -fPIC to -fno-PIC on PowerPC exposed an issue in
OpenMP for PowerPC.
The issue is reported here:
https://bugs.llvm.org/show_bug.cgi?id=40082
This is a fix for that issue.
Also removed the XFAIL from the two tests that were failing under -fno-PIC.
Differential Revision: https://reviews.llvm.org/D56286
llvm-svn: 355229
This change makes the runtime decide the intended use of each barrier
invocation, for the OMPT synchronization tool callbacks. The OpenMP 5.0
specification defines four possible barrier kinds -- implicit, explicit,
implementation, and just normal barrier.
Patch by Hansang Bae
Differential Revision: https://reviews.llvm.org/D58247
llvm-svn: 355140
Nest-var, OMP_NESTED, omp_set_nested()., and omp_get_nested() have been
deprecated in the 5.0 spec. Initial nesting info is now derived from
OMP_MAX_ACTIVE_LEVELS, OMP_NUM_THREADS, and OMP_PROC_BIND.
This patch deprecates the internal ICV that corresponds to nest-var, and
replaces it with the max-active-levels-var ICV to determine nesting. The
change still allows for use of OMP_NESTED (according to 5.0 changes),
omp_get_nested, and omp_set_nested, which have had deprecation messages
added to them. The change allows certain settings of OMP_NUM_THREADS,
OMP_PROC_BIND, and OMP_MAX_ACTIVE_LEVELS to turn on nesting, but
OMP_NESTED=0 will still force nesting to be off.
The runtime now prints informative messages about deprecation of
OMP_NESTED, omp_set_nested(), and omp_get_nested(), when those
environment variables or routines are used. It also prints deprecated
message in output for KMP_SETTINGS and OMP_DISPLAY_ENV for OMP_NESTED.
This patch also fixes OMP_DISPLAY_ENV output for OMP_TARGET_OFFLOAD.
Patch by Terry Wilmarth
Differential Revision: https://reviews.llvm.org/D58408
llvm-svn: 355138
This patch cleans up the yielding code and makes it optional. An
environment variable, KMP_USE_YIELD, was added. Yielding is still
on by default (KMP_USE_YIELD=1), but can be turned off completely
(KMP_USE_YIELD=0), or turned on only when oversubscription is detected
(KMP_USE_YIELD=2). Note that oversubscription cannot always be detected
by the runtime (for example, when the runtime is initialized and the
process forks, oversubscription cannot be detected currently over
multiple instances of the runtime).
Because yielding can be controlled by user now, the library mode
settings (from KMP_LIBRARY) for throughput and turnaround have been
adjusted by altering blocktime, unless that was also explicitly set.
In the original code, there were a number of places where a double yield
might have been done under oversubscription. This version checks
oversubscription and if that's not going to yield, then it does
the spin check.
Patch by Terry Wilmarth
Differential Revision: https://reviews.llvm.org/D58148
llvm-svn: 355120
This patch adds the new 5.0 API function omp_get_supported_active_levels().
Patch by Terry Wilmarth
Differential Revision: https://reviews.llvm.org/D58211
llvm-svn: 354368
Remove fatal error messages from the cancellation API for GOMP
Add __kmp_barrier_gomp_cancel() to implement cancellation of parallel regions.
This new function uses the linear barrier algorithm with a cancellable
nonsleepable wait loop.
Differential Revision: https://reviews.llvm.org/D57969
llvm-svn: 354367
The thread-limit-var and omp_get_thread_limit API was not perfectly handled for
teams construct. Now, when modified by thread_limit clause, omp_get_thread_limit
reports the correct value. In addition, the value is restored when leaving the
teams construct to what it was in the encountering context.
This is done partly by creating the notion of a Contention Group root (CG root)
that keeps track of the thread at the root of each separate CG, the
thread-limit-var associated with the CG, and associated counter of active
threads within the contention group.
thread-limits are passed from master to worker threads via an entry in the ICV
data structure. When a "contention group switch" occurs, a new CG root record is
made and passed from master to worker. A thread could potentially have several
CG root records if it encounters multiple nested teams constructs (but at the
moment the spec doesn't allow for nested teams, so the most one could have
currently is 2). The master of the teams masters gets the thread-limit clause
value stored to its local ICV structure, and the other teams masters copy it
from the master. The thread-limit is set from that ICV copy and restored to the
ICV copy when entering and leaving the teams construct.
This change also fixes a bug when the top-level teams construct team gets
reused, and OMP_DYNAMIC was true, which can cause the expected size of this team
to be smaller than what was actually allocated. The fix updates the size of the
team after its threads were reserved.
Patch by Terry Wilmarth
Differential Revision: https://reviews.llvm.org/D56804
llvm-svn: 353747
%s refers to the test file in the source tree. This was accidentally added in
r351197 / 2b46d30 ("[OMPT] Second chunk of final OMPT 5.0 interface updates").
Differential Revision: https://reviews.llvm.org/D58002
llvm-svn: 353715
