The lldb sanitizer bot is flagging a container-overflow error after we
introduced test TestWasm.py. MemoryCache::Read didn't behave correctly
in case of partial reads that can happen with object files whose size is
smaller that the cache size. It should return the actual number of bytes
read and not try to fill the buffer with random memory.
Module::GetMemoryObjectFile needs to be modified accordingly, to resize
its buffer to only the size that was read.
Differential Revision: https://reviews.llvm.org/D75200
Currently we only show the user that the expression failed but not
what is actually wrong with it. This just dumps the error we get
back alongside the other output to the error stream.
This should also help with finding out with why sometimees the
TestWatchLocationWithWatchSet.py test fails here on the LLDB
incremental bot on Green Dragon.
The GetOffset documentation was copied from the function above
so I completely deleted that one. The rest was just outdated
documentation that didn't keep up with renamed or changed
function parameters/return types.
Summary: This adds unit tests for FindEntryIndexesThatContain, this is done in preparation for changing the logic of the function.
Reviewers: labath, teemperor
Reviewed By: labath
Subscribers: arphaman, JDevlieghere, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D75180
Summary:
This packet is necessary to make lldb work with the remote-gdb stub in
user mode qemu when running position-independent binaries. It reports
the relative position (load bias) of the loaded executable wrt. the
addresses in the file itself.
Lldb needs to know this information in order to correctly set the load
address of the executable. Normally, lldb would be able to find this out
on its own by following the breadcrumbs in the process auxiliary vector,
but we can't do this here because qemu does not support the
qXfer:auxv:read packet.
This patch does not implement full scope of the qOffsets packet (it only
supports packets with identical code, data and bss offsets), because it
is not fully clear how should the different offsets be handled and I am
not aware of a producer which would make use of this feature (qemu will
always
<https://github.com/qemu/qemu/blob/master/linux-user/elfload.c#L2436>
return the same value for code and data offsets). In fact, even gdb
ignores the offset for the bss sections, and uses the "data" offset
instead. So, until the we need more of this packet, I think it's best
to stick to the simplest solution possible. This patch simply rejects
replies with non-uniform offsets.
Reviewers: clayborg, jasonmolenda
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D74598
Updated the patch to only fetch $pc on a Return Address-using
target only if we're in a trap frame *and* if there is a saved
location for $pc in the trap frame's unwind rules. If not,
we fall back to fetching the Return Address register (eg $lr).
Original commit msg:
Unwind past an interrupt handler correctly on arm or at pc==0
Fix RegisterContextLLDB::InitializeNonZerothFrame so that it
will fetch a FullUnwindPlan instead of falling back to the
architectural default unwind plan -- GetFullUnwindPlan knows
how to spot a jmp 0x0 that results in a fault, which may be
the case when we see a trap handler on the stack.
Fix RegisterContextLLDB::SavedLocationForRegister so that when
the pc value is requested from a trap handler frame, where we
have a complete register context available to us, don't provide
the Return Address register (lr) instead of the pc. We have
an actual pc value here, and it's pointing to the instruction
that faulted.
Differential revision: https://reviews.llvm.org/D75007
<rdar://problem/59416588>
The debugserver profile thread used to suspend itself between samples with
a usleep. When you detach or kill, MachProcess::Clear would delay replying
to the incoming packet until pthread_join of the profile thread returned.
If you are unlucky or the suspend delay is long, it could take longer than
the packet timeout for pthread_join to return. Then you would get an error
about detach not succeeding from lldb - even though in fact the detach was
successful...
I replaced the usleep with PThreadEvents entity. Then we just call a timed
WaitForEventBits, and when debugserver wants to stop the profile thread, it
can set the event bit, and the sleep will exit immediately.
Differential Revision: https://reviews.llvm.org/D75004
AVR usually uses two byte addresses. By making DataExtractor deal with
this, it is possible to load AVR binaries that don't have debug info
associated with them.
Differential Revision: https://reviews.llvm.org/D73969
This member is for some reason initialized in ClangASTSource::FindExternalVisibleDecls
so all other functions using this member dereference a nullptr unless we
call this function before that. Let's just initialize this in the constructor.
This should be NFC as the only side effect is that we don't reset the namespace map
when calling ClangASTSource::FindExternalVisibleDecls multiple times (and we never
call this function multiple times for one NameSearchContext from what I can see).
The size of NameSearchContext isn't important as we never store it and rarely
allocate more than a few. This way we also don't have to use the memset to
initialize these fields to zero.
These can come out nondeterministically for two reasons:
- sorting based on ConstStringified pointer values
- different relative speeds of the indexing threads
Making these nondeterministic without incurring performance penalties is
hard, so I just make the test expect them in any order (the order is not
important in this test anyway.
Seems like this code raised some alarm bells as it looks like an ArrayRef
to a temporary initializer list, but it's actually just calling the ArrayRef(T*, T*)
constructor. Let's clarify this and directly call the right ArrayRef constructor here.
Fixes rdar://problem/59176052
Summary:
I added an `abort()` call to some code and noticed that the test suite was still passing and it just marked my test as "UNSUPPORTED".
It seems the reason for that is that we expect failing tests to print "FAIL:" which doesn't happen when we crash. If we then also
have an unsupported because we skipped some debug information in the output, we just mark the test passing because it is unsupported
on the current platform.
This patch marks any test that has a non-zero exit code as failing even if it doesn't print "FAIL:" (e.g., because it crashed).
Reviewers: labath, JDevlieghere
Reviewed By: labath, JDevlieghere
Subscribers: aprantl, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D75031
These are technically text files, but the object file layer treats them
as binary, and the relevant tests verify the parsed contents byte for
byte. Git's crlf conversion can make those tests fail. Marking the files
as non-text disables that.
Order of evaluation of the operands of any C++ operator [...] is
unspecified. This patch fixes the issue in Stream::Indent by calling the
function consecutively.
On my Windows setup, TestSettings.py fails because the function prints
the value first, followed by the indentation.
Expected result:
MY_FILE=this is a file name with spaces.txt
Actual result:
MY_FILE =this is a file name with spaces.txt
The aarcht64-ubuntu bot is showing a test failure in TestHandleAbort.py
with this patch. Adding some logging to that file, it looks like
the saved register context above the trap handler does not have
save state for $pc, but it does have it for $lr on that platform.
I need to fall back to looking for $lr if the $pc cannot be retrieved.
I'll update the patch and re-commit once that's fixed.
This reverts commit edc4f4c9c9.
Fix RegisterContextLLDB::InitializeNonZerothFrame so that it
will fetch a FullUnwindPlan instead of falling back to the
architectural default unwind plan -- GetFullUnwindPlan knows
how to spot a jmp 0x0 that results in a fault, which may be
the case when we see a trap handler on the stack.
Fix RegisterContextLLDB::SavedLocationForRegister so that when
the pc value is requested from a trap handler frame, where we
have a complete register context available to us, don't provide
the Return Address register (lr) instead of the pc. We have
an actual pc value here, and it's pointing to the instruction
that faulted.
Differential revision: https://reviews.llvm.org/D75007
<rdar://problem/59416588>
Highlight the color marker similar to what we do for the column marker.
The default color matches the color of the current PC marker (->) in the
default disassembly format.
Differential revision: https://reviews.llvm.org/D75070
This patch moves the SB API method GetExtendedCrashInformation from
SBTarget to SBProcess since it only makes sense to call this method on a
sane process which might not be the case on a SBTarget object.
It also addresses some feedbacks received after landing the first patch
for the 'crash-info' feature.
Differential Revision: https://reviews.llvm.org/D75049
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
The convention is that the dwp file name is derived from the name of the
file holding the executable code, even if the linked portion of the
debug info is elsewhere (objcopy --only-keep-debug).
Summary:
Currently the test suite runs with enabled automatically applied Clang fix-its for expressions.
This is causing that sometimes incorrect expressions in tests are still evaluated even though they
are actually incorrect. Let's disable this feature in the test suite so that we know when expressions
are wrong and leave the fix-it testing to the dedicated tests for that feature.
Also updates the `lang/cpp/operators/` test as it seems Clang needs the `struct` keywords
before C and would otherwise fail without fixits.
Reviewers: jingham, JDevlieghere, shafik
Reviewed By: JDevlieghere, shafik
Subscribers: shafik, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D74957
Explicit dynsym/dynstr sections were added in a6370d5 to compensate for
a yaml2obj change D74764. This test doesn't need those sections, so
instead I just delete the explicit section blocks, and also the
"DynamicSymbols" block, which triggers their implicit generation.
Summary:
When we added support for type units in dwo files, we changed the
"manual" dwarf index to index _all_ dwarf units in the dwo file instead
of just the split unit belonging to our skeleton unit. This was fine for
dwo files, as they contain only a single compile units and type units do
not have a split type unit which would point to them.
However, this does not work for dwp files because, these files do
contain multiple split compile units, and the current approach means
that each unit gets indexed multiple times (once for each split unit =>
n^2 complexity).
This patch teaches the manual dwarf index to treat dwp files specially.
Any type units in the dwp file added to the main list of compile units
and indexed with them in a single batch. Split compile units in dwp
files are still indexed as a part of their skeleton unit -- this is done
because we need the DW_AT_language attribute from the skeleton unit to
index them properly.
Handling of dwo files remains unchanged -- all units (type and skeleton)
are indexed when we reach the dwo file through the split unit.
Reviewers: clayborg, JDevlieghere, aprantl
Subscribers: arphaman, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D74964
Summary:
We have a lot of code in our lookup code to pass around `current_id` counters which end up in our logs like this:
```
AOCTV::FT [234] Found XYZ
```
This patch removes all of this code because:
* I'm splitting up all humongous functions, so I need to write more and more boilerplate to pass around these ids.
* I never saw any similar counters in the LLDB/LLVM code base.
* They're essentially globals and the last thing we need in LLDB is even more global state.
* They're not really useful when readings logs. It doesn't help that there isn't just 1 or 2 counters, but 12 (!) unique counters. I always thought that if I see two identical counter values in those brackets it's the same lookup request, but it seems that's only true by accident (and you can't know which of the 12 counters is actually printed without reading the code). The only time I know I can trust the counters is when it's obvious from the log that it's the same counter like in the log below, but then why have the counters in the first place?
```
LayoutRecordType[28] on (ASTContext*)0x00007FFA1C840200 'scratch ASTContext' for (RecordDecl*)0x00007FFA0AAE8CF0 [name = '__tree']
LRT[28] returned:
LRT[28] Original = (RecordDecl*)%p
LRT[28] Size = %lld
LRT[28] Alignment = %lld
LRT[28] Fields:
LRT[28] (FieldDecl*)0x00007FFA1A13B1D0, Name = '__begin_node_', Offset = 0 bits
LRT[28] (FieldDecl*)0x00007FFA1C08FD30, Name = '__pair1_', Offset = 64 bits
LRT[28] (FieldDecl*)0x00007FFA1C061210, Name = '__pair3_', Offset = 128 bits
LRT[28] Bases:
```
Reviewers: labath, shafik, JDevlieghere
Reviewed By: labath, shafik, JDevlieghere
Subscribers: abidh, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D74951
D74764 (https://reviews.llvm.org/rG31f2ad9c368d47721508cbd0d120d626f9041715)
changed the behavior of the yaml2obj. Now it assigns virtual addresses
for allocatable sections.
SymbolFile/Breakpad/symtab.test started to fail after this change:
(http://lab.llvm.org:8011/builders/lldb-x86_64-debian/builds/5520/steps/test/logs/stdio)
Command Output (stderr):
--
/home/worker/lldb-x86_64-debian/lldb-x86_64-debian/llvm-project/lldb/test/Shell/SymbolFile/Breakpad/symtab.test:6:10: error: CHECK: expected string not found in input
# CHECK: Symtab, file = {{.*}}symtab.out, num_symbols = 5:
^
<stdin>:15:1: note: scanning from here
Symtab, file = /home/worker/lldb-x86_64-debian/lldb-x86_64-debian/build/tools/lldb/test/SymbolFile/Breakpad/Output/symtab.out, num_symbols = 6:
^
<stdin>:15:99: note: possible intended match here
Symtab, file = /home/worker/lldb-x86_64-debian/lldb-x86_64-debian/build/tools/lldb/test/SymbolFile/Breakpad/Output/symtab.out, num_symbols = 6:
For now I've updated the basic-elf.yaml so that now it produce the same layout as before D74764.
Breakpad/symtab.test should be updated it seems.
Summary:
This is another attempt of 0bb90628b5.
The difference is that g_python_home is not declared as const. Since
some versions of python do not expect that.
Subscribers: mgorny, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D74998
On Apple platforms, is __arm__ isn't defined and we're not on Intel, we use an
alternate std::string layout. I.e., the libcxx string test fails on phones
because the hand-crafted "garbage" string structs are actually valid strings.
See:
```
// _LIBCPP_ALTERNATE_STRING_LAYOUT is an old name for
// _LIBCPP_ABI_ALTERNATE_STRING_LAYOUT left here for backward compatibility.
#if (defined(__APPLE__) && !defined(__i386__) && !defined(__x86_64__) && \
(!defined(__arm__) || __ARM_ARCH_7K__ >= 2)) || \
defined(_LIBCPP_ALTERNATE_STRING_LAYOUT)
#define _LIBCPP_ABI_ALTERNATE_STRING_LAYOUT
#endif
```
Disable inspection of the garbage structs on Apple+ARM devices.
Currently, in macOS, when a process crashes, lldb halts inside the
implementation disassembly without yielding any useful information.
The only way to get more information is to detach from the process, then wait
for ReportCrash to generate a report, find the report, then see what error
message was included in it. Instead of waiting for this to happen, lldb could
locate the error_string and make it available to the user.
This patch addresses this issue by enabling the user to fetch extended
crash information for crashed processes using `process status --verbose`.
Depending on the platform, this will try to gather different crash information
into an structured data dictionnary. This dictionnary is generic and extensible,
as it contains an array for each different type of crash information.
On Darwin Platforms, lldb will iterate over each of the target's images,
extract their `__crash_info` section and generated a StructuredData::Array
containing, in each entry, the module spec, its UUID, the crash messages
and the abort cause. The array will be inserted into the platform's
`m_extended_crash_info` dictionnary and `FetchExtendedCrashInformation` will
return its JSON representation like this:
```
{
"crash-info annotations": [
{
"abort-cause": 0,
"image": "/usr/lib/system/libsystem_malloc.dylib",
"message": "main(76483,0x1000cedc0) malloc: *** error for object 0x1003040a0: pointer being freed was not allocated",
"message2": "",
"uuid": "5747D0C9-900D-3306-8D70-1E2EA4B7E821"
},
...
],
...
}
```
This crash information can also be fetched using the SB API or lldb-rpc protocol
using SBTarget::GetExtendedCrashInformation().
rdar://37736535
Differential Revision: https://reviews.llvm.org/D74657
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
Since the `platform process` commamnd has more tests now, this commits
separates each of the `platform process` subcommand's test in its own directory.
Differential Revision: https://reviews.llvm.org/D74836
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
Summary:
This change allows a hard coded relative PYTHONHOME setting. So that
python can easily be packaged together with lldb.
The change includes:
1. Extend LLDB_RELOCATABLE_PYTHON to all platforms. It defaults to ON
for platforms other than Windows, to keep the behavior compatible.
2. Allows to customize LLDB_PYTHON_HOME. But still defaults to
PYTHON_HOME.
3. LLDB_PYTHON_HOME can be a path relative to liblldb. If it is
relative, we will resolve it before send it to Py_DecodeLocale.
Subscribers: mgorny, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D74727
Summary:
The purpose of this patch is to make identifying missing dependencies clearer to the user.
`find_package` will report if a package is not found, that output, combined with the exiting
status message, is clearer than not having the additional verbosity.
If the SWIG dependency is required {LLDB_ENABLE_PYTHON, LLDB_ENABLE_LUA}
and SWIG is not available, fail the configuration step. Terminate the
configure early rather than later with a clear error message.
We could possibly modify:
`llvm-project/lldb/cmake/modules/FindPythonInterpAndLibs.cmake`
However, the patch here seems clear in my opinion.
Reviewers: aadsm, hhb, JDevlieghere
Reviewed By: JDevlieghere
Subscribers: labath, jrm, mgorny, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D74917