This patch replaces explicit calls to log::Printf with the new LLDB_LOGF
macro. The macro is similar to LLDB_LOG but supports printf-style format
strings, instead of formatv-style format strings.
So instead of writing:
if (log)
log->Printf("%s\n", str);
You'd write:
LLDB_LOG(log, "%s\n", str);
This change was done mechanically with the command below. I replaced the
spurious if-checks with vim, since I know how to do multi-line
replacements with it.
find . -type f -name '*.cpp' -exec \
sed -i '' -E 's/log->Printf\(/LLDB_LOGF\(log, /g' "{}" +
Differential revision: https://reviews.llvm.org/D65128
llvm-svn: 366936
Change the interface to return an expected, instead of taking a Status
pointer.
Differential revision: https://reviews.llvm.org/D64163
llvm-svn: 365226
Summary:
NFC = [[ https://llvm.org/docs/Lexicon.html#nfc | Non functional change ]]
This commit is the result of modernizing the LLDB codebase by using
`nullptr` instread of `0` or `NULL`. See
https://clang.llvm.org/extra/clang-tidy/checks/modernize-use-nullptr.html
for more information.
This is the command I ran and I to fix and format the code base:
```
run-clang-tidy.py \
-header-filter='.*' \
-checks='-*,modernize-use-nullptr' \
-fix ~/dev/llvm-project/lldb/.* \
-format \
-style LLVM \
-p ~/llvm-builds/debug-ninja-gcc
```
NOTE: There were also changes to `llvm/utils/unittest` but I did not
include them because I felt that maybe this library shall be updated in
isolation somehow.
NOTE: I know this is a rather large commit but it is a nobrainer in most
parts.
Reviewers: martong, espindola, shafik, #lldb, JDevlieghere
Reviewed By: JDevlieghere
Subscribers: arsenm, jvesely, nhaehnle, hiraditya, JDevlieghere, teemperor, rnkovacs, emaste, kubamracek, nemanjai, ki.stfu, javed.absar, arichardson, kbarton, jrtc27, MaskRay, atanasyan, dexonsmith, arphaman, jfb, jsji, jdoerfert, lldb-commits, llvm-commits
Tags: #lldb, #llvm
Differential Revision: https://reviews.llvm.org/D61847
llvm-svn: 361484
A lot of comments in LLDB are surrounded by an ASCII line to delimit the
begging and end of the comment.
Its use is not really consistent across the code base, sometimes the
lines are longer, sometimes they are shorter and sometimes they are
omitted. Furthermore, it looks kind of weird with the 80 column limit,
where the comment actually extends past the line, but not by much.
Furthermore, when /// is used for Doxygen comments, it looks
particularly odd. And when // is used, it incorrectly gives the
impression that it's actually a Doxygen comment.
I assume these lines were added to improve distinguishing between
comments and code. However, given that todays editors and IDEs do a
great job at highlighting comments, I think it's worth to drop this for
the sake of consistency. The alternative is fixing all the
inconsistencies, which would create a lot more churn.
Differential revision: https://reviews.llvm.org/D60508
llvm-svn: 358135
Use '127.0.0.1' instead of 'localhost' in ConnectLocally() function
as this is the specific address the server is bound to. Using
'localhost' may involve trying IPv6 first which may accidentally be used
by another service.
While technically it might be interesting to support IPv6 here, it would
need to be supported properly, with the connection copying family
and address from the listening socket, and possibly without relying
on existence of 'localhost' at all.
Differential Revision: https://reviews.llvm.org/D58883
llvm-svn: 355285
Summary:
The field `m_decompression_scratch_type` is only used when `HAVE_LIBCOMPRESSION` is
defined, which caused a warning which I fixed in rLLDB350675 by just marking the variable as always used.
This patch fixes this in a better way by only defining the variable (and the related `m_decompression_scratch`
variable) when `HAVE_LIBCOMPRESSION` is defined. This also required changing the way we handle
`HAVE_LIBCOMPRESSION` works, as this was previously always defined on macOS within the source file
but not in the header. Now it's always defined from within our config header when CMake defines it or when
we are on macOS.
The field initialization was moved to the header to prevent that we have `#ifdef` within our initializer list.
Reviewers: #lldb, jasonmolenda, sgraenitz, labath
Reviewed By: labath
Subscribers: labath, beanz, mgorny, lldb-commits, dblaikie
Differential Revision: https://reviews.llvm.org/D57011
llvm-svn: 352175
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
Summary:
This adds unnamed pipe support in PipeWindows to support communication between a debug server and child process.
Modify PipeWindows::CreateNew to support the creation of an unnamed pipe.
Rename the previous method that created a named pipe to PipeWindows::CreateNewNamed.
Reviewers: zturner, llvm-commits
Reviewed By: zturner
Subscribers: Hui, labath, lldb-commits
Differential Revision: https://reviews.llvm.org/D56234
llvm-svn: 350784
Summary: The member is private and unused if HAVE_LIBCOMPRESSION is undefined, which triggers Clang's -Wunused-private-field warning.
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D56458
llvm-svn: 350675
systems. It has been available in the OS over over three years
now. If lldb doesn't link against -lcompression, it should be an
error.
Allocate a scratch buffer for libcompression to use when decoding
packets, instead of it having to allocate & free one on every call.
Fix a typeo with the size of the buffer that compression_decode_buffer()
is expanding into.
<rdar://problem/41601084>
llvm-svn: 349563
This patch simplifies boolean expressions acorss LLDB. It was generated
using clang-tidy with the following command:
run-clang-tidy.py -checks='-*,readability-simplify-boolean-expr' -format -fix $PWD
Differential revision: https://reviews.llvm.org/D55584
llvm-svn: 349215
Summary: Instead use a more reasonable value to start and rely on the fact that SmallString will resize if necessary.
Reviewers: labath, asmith
Reviewed By: labath
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D55457
llvm-svn: 348775
This patch removes the comments grouping header includes. They were
added after running IWYU over the LLDB codebase. However they add little
value, are often outdates and burdensome to maintain.
llvm-svn: 346626
This patch removes the logic for resolving paths out of FileSpec and
updates call sites to rely on the FileSystem class instead.
Differential revision: https://reviews.llvm.org/D53915
llvm-svn: 345890
This patch removes the Exists method from FileSpec and updates its uses
with calls to the FileSystem.
Differential revision: https://reviews.llvm.org/D53845
llvm-svn: 345854
Summary:
Instead of a function taking an enum value determining which path to
return, we now have a suite of functions, each returning a single path
kind. This makes it easy to move the python-path function into a
specific plugin in a follow-up commit.
All the users of GetLLDBPath were converted to call specific functions
instead. Most of them were hard-coding the enum value anyway, so this
conversion was simple. The only exception was SBHostOS, which I've
changed to use a switch on the incoming enum value.
Reviewers: clayborg, zturner
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D48272
llvm-svn: 335052
SetFile has an optional style argument which defaulted to the native
style. This patch makes that argument mandatory so clients of the
FileSpec class are forced to think about the correct syntax.
At the same time this introduces a (protected) convenience method to
update the file from within the FileSpec class that keeps the current
style.
These two changes together prevent a potential pitfall where the style
might be forgotten, leading to the path being updated and the style
unintentionally being changed to the host style.
llvm-svn: 334663
Summary:
The comments on this class were out of date with the implementation, and
the implementation itself was inconsistent with our usage of the Timeout
class (I started converting everything to use this class back in D27136,
but I missed this one). I avoid duplicating the waiting logic by
introducing a templated WaitFor function, and make other functions
delegate to that. This function can be also used as a replacement for
the unused WaitForBitToBeSet functions I removed, if it turns out to be
necessary.
As this changes the meaning of a "zero" timeout, I tracked down all the
callers of these functions and updated them accordingly. Propagating the
changes to all the callers of RunShellCommand was a bit too much for
this patch, so I stopped there and will continue that in a follow-up
patch.
I also add some basic unittests for the functions I modified.
Reviewers: jingham, clayborg
Subscribers: mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D46580
llvm-svn: 331880
This is intended as a clean up after the big clang-format commit
(r280751), which unfortunately resulted in many of the comment
paragraphs in LLDB being very hard to read.
FYI, the script I used was:
import textwrap
import commands
import os
import sys
import re
tmp = "%s.tmp"%sys.argv[1]
out = open(tmp, "w+")
with open(sys.argv[1], "r") as f:
header = ""
text = ""
comment = re.compile(r'^( *//) ([^ ].*)$')
special = re.compile(r'^((([A-Z]+[: ])|([0-9]+ )).*)|(.*;)$')
for line in f:
match = comment.match(line)
if match and not special.match(match.group(2)):
# skip intentionally short comments.
if not text and len(match.group(2)) < 40:
out.write(line)
continue
if text:
text += " " + match.group(2)
else:
header = match.group(1)
text = match.group(2)
continue
if text:
filled = textwrap.wrap(text, width=(78-len(header)),
break_long_words=False)
for l in filled:
out.write(header+" "+l+'\n')
text = ""
out.write(line)
os.rename(tmp, sys.argv[1])
Differential Revision: https://reviews.llvm.org/D46144
llvm-svn: 331197
Summary:
We've had a mismatch in the checksum computation between the sender and
receiver. The sender computed the payload checksum using the wire
encoding of the packet, while the receiver did this after expanding
un-escaping and expanding run-length-encoded sequences. This resulted in
communication breakdown if packets using these feature were sent in the
ack mode.
Normally, this did not cause any issues since the only packet we send in
the ack-mode is the QStartNoAckMode packet, but I ran into this when
debugging the lldb-server tests which (for better or worse) don't use
this mode.
According to the gdb-remote documentation "The two-digit checksum is computed as
the modulo 256 sum of all characters between the leading ‘$’ and the
trailing ‘#’", it seems that our sender is doing the right thing here.
Therefore, I fix the receiver the match the sender behavior and add a
test.
With this bug fixed, we can see that lldb-server is sending a stop-reply
after receiving the "k" in the same way as debugserver does (but we
weren't detecting this because at that point the connection was dead
already). I fix that expectation as well.
Reviewers: clayborg, jasonmolenda
Subscribers: mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D44922
llvm-svn: 328693
Summary:
Gdb servers like openocd may send many $O reply packets for the client to output during a qRcmd command sequence. Currently, lldb interprets the first O packet as an unexpected response. Besides generating no output, this causes lldb to get out of sync with future commands because it continues reading O packets from the first command as response to subsequent commands.
This patch handles any O packets during an qRcmd, treating the first non-O packet as the true response.
Preliminary discussion at http://lists.llvm.org/pipermail/lldb-dev/2018-January/013078.html
Reviewers: clayborg
Reviewed By: clayborg
Subscribers: labath, lldb-commits
Differential Revision: https://reviews.llvm.org/D41745
Patch by Owen Shaw <llvm@owenpshaw.net>
llvm-svn: 322190
Summary:
There was some confusion in the code about how to represent process
environment. Most of the code (ab)used the Args class for this purpose,
but some of it used a more basic StringList class instead. In either
case, the fact that the underlying abstraction did not provide primitive
operations for the typical environment operations meant that even a
simple operation like checking for an environment variable value was
several lines of code.
This patch adds a separate Environment class, which is essentialy a
llvm::StringMap<std::string> in disguise. To standard StringMap
functionality, it adds a couple of new functions, which are specific to
the environment use case:
- (most important) envp conversion for passing into execve() and likes.
Instead of trying to maintain a constantly up-to-date envp view, it
provides a function which creates a envp view on demand, with the
expectation that this will be called as the very last thing before
handing the value to the system function.
- insert(StringRef KeyEqValue) - splits KeyEqValue into (key, value)
pair and inserts it into the environment map.
- compose(value_type KeyValue) - takes a map entry and converts in back
into "KEY=VALUE" representation.
With this interface most of the environment-manipulating code becomes
one-liners. The only tricky part was maintaining compatibility in
SBLaunchInfo, which expects that the environment entries are accessible
by index and that the returned const char* is backed by the launch info
object (random access into maps is hard and the map stores the entry in
a deconstructed form, so we cannot just return a .c_str() value). To
solve this, I have the SBLaunchInfo convert the environment into the
"envp" form, and use it to answer the environment queries. Extra code is
added to make sure the envp version is always in sync.
(This also improves the layering situation as Args was in the Interpreter module
whereas Environment is in Utility.)
Reviewers: zturner, davide, jingham, clayborg
Subscribers: emaste, lldb-commits, mgorny
Differential Revision: https://reviews.llvm.org/D41359
llvm-svn: 322174
Null-checking functions which aren't marked weak_import is a no-op
(the compiler rewrites the check to 'true'), regardless of whether a
library providing its definition is weak-linked. If the deployment
target is greater than the minimum requirement, the availability markup
on APIs does not lower to weak_import.
Remove no-op null checks to clean up the code and silence warnings.
Differential Revision: https://reviews.llvm.org/D40812
llvm-svn: 319936
Summary:
These tests used to log the error message and return plain bool mainly
because at the time they we written, we did not have a nice way to
assert on llvm::Error values. That is no longer true, so replace this
pattern with a more idiomatic approach.
As a part of this patch, I also move the formatting of
GDBRemoteCommunication::PacketResult values out of the test code, as
that can be useful elsewhere.
Reviewers: zturner, eugene
Subscribers: mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D39790
llvm-svn: 317795
"Prevent negative chars from being sign-extended into isprint and isspace which take and int and crash if the int is negative"
https://reviews.llvm.org/D36620
llvm-svn: 311207
This renames the LLDB error class to Status, as discussed
on the lldb-dev mailing list.
A change of this magnitude cannot easily be done without
find and replace, but that has potential to catch unwanted
occurrences of common strings such as "Error". Every effort
was made to find all the obvious things such as the word "Error"
appearing in a string, etc, but it's possible there are still
some lingering occurences left around. Hopefully nothing too
serious.
llvm-svn: 302872
All references to Host and Core have been removed, so this
class can now safely be lowered into Utility.
Differential Revision: https://reviews.llvm.org/D30559
llvm-svn: 296909
Summary:
When lldb-server is started with the -P <port> or -m/-M <min/max port> options to specify which ports are available for remote connections the child debug server is told what port it should listen on. In those cases lldb-server needs to wait for the child to report it’s port number as otherwise it can tell the lldb client that the child is up and listening before it is actually listening on that port. lldb-server already waits in the cases where a port wasn’t specified by waiting until the child reports the port it is using. It was skipping this synchronisation step when passed a port numbers as it knew what the port would be however it does need to ensure the child process has had time to open that port and waiting until the child reports the port number makes sure this has happened.
This patch just removes the one case where a child was spawned and lldb-server did not wait for it to report it’s port number before telling the client lldb process the child is ready to connect to.
This issue was discussed on lldb-dev in a thread here:
http://lists.llvm.org/pipermail/lldb-dev/2017-February/012002.html
Reviewers: clayborg
Reviewed By: clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D30255
llvm-svn: 295947
and use it in the appropriate log statements.
Formatting of chrono types in log messages was very clunky. This should
make it much nicer to use and give better output. For details of the
formatting options see the chrono formatter in llvm.
llvm-svn: 294738
This moves the following classes from Core -> Utility.
ConstString
Error
RegularExpression
Stream
StreamString
The goal here is to get lldbUtility into a state where it has
no dependendencies except on itself and LLVM, so it can be the
starting point at which to start untangling LLDB's dependencies.
These are all low level and very widely used classes, and
previously lldbUtility had dependencies up to lldbCore in order
to use these classes. So moving then down to lldbUtility makes
sense from both the short term and long term perspective in
solving this problem.
Differential Revision: https://reviews.llvm.org/D29427
llvm-svn: 293941
This replaces the raw integer timeout parameters in the class with their
chrono-based equivalents. To achieve this, I have moved the Timeout class to a
more generic place and added a quick unit test for it.
llvm-svn: 287920
Summary:
This replaces the usage of raw integers with duration classes in the gdb-remote
packet management functions. The values are still converted back to integers once
they go into the generic Communication class -- that I am leaving to a separate
change.
The changes are mostly straight-forward (*), the only tricky part was
representation of infinite timeouts.
Currently, we use UINT32_MAX to denote infinite timeout. This is not well suited
for duration classes, as they tend to do arithmetic on the values, and the
identity of the MAX value can easily get lost (e.g.
microseconds(seconds(UINT32_MAX)).count() != UINT32_MAX). We cannot use zero to
represent infinity (as Listener classes do) because we already use it to do
non-blocking polling reads. For this reason, I chose to have an explicit value
for infinity.
The way I achieved that is via llvm::Optional, and I think it reads quite
natural. Passing llvm::None as "timeout" means "no timeout", while passing zero
means "poll". The only tricky part is this breaks implicit conversions (seconds
are implicitly convertible to microseconds, but Optional<seconds> cannot be
easily converted into Optional<microseconds>). For this reason I added a special
class Timeout, inheriting from Optional, and enabling the necessary conversions
one would normally expect.
(*) The other tricky part was GDBRemoteCommunication::PopPacketFromQueue, which
was needlessly complicated. I've simplified it, but that one is only used in
non-stop mode, and so is untested.
Reviewers: clayborg, zturner, jingham
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D26971
llvm-svn: 287864
This is a large API change that removes the two functions from
StreamString that return a std::string& and a const std::string&,
and instead provide one function which returns a StringRef.
Direct access to the underlying buffer violates the concept of
a "stream" which is intended to provide forward only access,
and makes porting to llvm::raw_ostream more difficult in the
future.
Differential Revision: https://reviews.llvm.org/D26698
llvm-svn: 287152
Summary:
Most of the changes are very straight-forward, the only tricky part was the
"packet speed-test" function, which is very time-heavy. As the function was
completely untested, I added a quick unit smoke test for it.
Reviewers: clayborg, zturner
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D25391
llvm-svn: 285602
This updates getters and setters to use StringRef instead of
const char *. I tested the build on Linux, Windows, and OSX
and saw no build or test failures. I cannot test any BSD
or Android variants, however I expect the required changes
to be minimal or non-existant.
llvm-svn: 282079
