This reverts commit 6905394d15. The
changed test is failing on Debian/x86_64, possibly because lldb is
subtracting an offset from the DW_AT_call_pc address used for the
artificial frame:
http://lab.llvm.org:8011/builders/lldb-x86_64-debian/builds/7171/steps/test/logs/stdio
/home/worker/lldb-x86_64-debian/lldb-x86_64-debian/llvm-project/lldb/test/API/functionalities/tail_call_frames/unambiguous_sequence/main.cpp:6:17: error: CHECK-NEXT: expected string not found in input
// CHECK-NEXT: frame #1: 0x{{[0-9a-f]+}} a.out`func3() at main.cpp:14:3 [opt] [artificial]
^
<stdin>:3:2: note: scanning from here
frame #1: 0x0000000000401127 a.out`func3() at main.cpp:13:4 [opt] [artificial]
Summary:
These two variables are only incremented under LLDB_CONFIGURATION_DEBUG but their
value is always logged when verbose lldb formatter logging is enabled, which causes that our
cache hit/miss log looks like this in non-Debug builds:
```
Cache hits: 0 - Cache Misses: 0
...
Cache hits: 0 - Cache Misses: 0
...
Cache hits: 0 - Cache Misses: 0
```
This just always increments those two counters independent of build mode.
Reviewers: JDevlieghere
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D76687
Summary:
Dumping the frame using the user-set format could cause that a debug LLDB doesn't behave as a release LLDB,
which could potentially break replaying a reproducer.
Also it's kinda strange that the frame format set by the user is used in the internal log output.
Reviewers: JDevlieghere
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D76685
lldb currently guesses the address to use when creating an artificial
frame (i.e., a frame constructed by determining the sequence of (tail)
calls which must have happened).
Guessing the address creates problems -- use the actual address provided
by the DW_AT_call_pc attribute instead.
Depends on D76336.
rdar://60307600
Differential Revision: https://reviews.llvm.org/D76337
Summary:
This seems only useful for debugging and it's just plainly printf'ing to the console instead
of some log, so let's remove this.
Reviewers: #lldb, JDevlieghere
Reviewed By: JDevlieghere
Subscribers: JDevlieghere
Differential Revision: https://reviews.llvm.org/D76699
Files imported by the script interpreter aren't opened by LLDB so they
don't end up in the reproducer. The solution is to explicitly add them
to the FileCollector.
Differential revision: https://reviews.llvm.org/D76626
Summary:
Detection of C strings does not work well for pointers. If the value object holding a (char*) pointer does not have an address (e.g., if it is a temp), the value is not considered a C string and its formatting is left to DumpDataExtractor rather than the special handling in ValueObject::DumpPrintableRepresentation. This leads to inconsistent outputs, e.g., in escaping non-ASCII characters. See the test for an example; the second test expectation is not met (without this patch). With this patch, the C string detection only insists that the pointer value is valid. The patch makes the code consistent with how the pointer is obtained in ValueObject::ReadPointedString.
Reviewers: teemperor
Reviewed By: teemperor
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D76650
Summary:
The default behavior of Platform::PutFile is to open the file and
truncate it if it already exists. This works fine and is a sensible
default, but it interacts badly with code-signing on iOS, as doing so
invalidates the signature of the file (even if the new content has a
valid code signature).
We have a couple tests which on purpose reload a different binary with
the same name. Those tests are currently broken because of the above
interaction.
This patch simply makes the Darwin platform unconditionally delete the
destination file before sending the new one to work around this issue.
Reviewers: jasonmolenda
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D76450
There an option: EvaluateExpressionOptions::SetResultIsInternal to indicate
whether the result number should be returned to the pool or not. It
got broken when the PersistentExpressionState was refactored.
This fixes the issue and provides a test of the behavior.
Differential Revision: https://reviews.llvm.org/D76532
This adds a formatter for libc++ std::unique_ptr.
I also refactored GetValueOfCompressedPair(...) out of LibCxxList.cpp since I need the same functionality and it made sense to share it.
Differential Revision: https://reviews.llvm.org/D76476
The newly introduced tests for unsetting environment variables
is failing on Windows. Skip the test there to allow investigation.
It seems like setting inherit-env to false was never tested
before. Could it be that the Windows process launcher doesn't
honor this setting?
Summary:
The interactions between the environment settings (`target.env-vars`,
`target.inherit-env`) and the inferior life-cycle are non-obvious
today. For example, if `target.inherit-env` is set, the `target.env-vars`
setting will be augmented with the contents of the host environment
the first time the launch environment is queried (usually at
launch). After that point, toggling `target.inherit-env` will have no
effect as there's no tracking of what comes from the host and what is
a user setting.
This patch computes the environment every time it is queried rather
than updating the contents of the `target.env-vars` property. This
means that toggling the `target.inherit-env` property later will now
have the intended effect.
This patch also adds a `target.unset-env-vars` settings that one can
use to remove variables from the launch environment. Using this, you
can inherit all but a few of the host environment.
The way the launch environment is constructed is:
1/ if `target.inherit-env` is set, then read the host environment
into the launch environment.
2/ Remove for the environment the variables listed in
`target.unset-env`.
3/ Augment the launch environment with the contents of
`target.env-vars`. This overrides any common values with the host
environment.
The one functional difference here that could be seen as a regression
is that `target.env-vars` will not contain the inferior environment
after launch. The patch implements a better alternative in the
`target show-launch-environment` command which will return the
environment computed through the above rules.
Reviewers: labath, jingham
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D76470
Summary:
When no arguments or environment is provided to SBTarget::LaunchSimple,
make it use the values surrently set in the target properties. You can
get the current behavior back by passing an empty array instead.
It seems like using the target defaults is a much more intuitive
behavior for those APIs. It's unllikely that anyone passed NULL/None to
this API after having set properties in order to explicitely ignore them.
One direct application of this change is within the testsuite. We have
plenty of tests calling LaunchSimple and passing None as environment.
If you passed --inferior-env to dotest.py to, for example, set
(DY)LD_LIBRARY_PATH, it wouldn't be taken into account.
Reviewers: jingham, labath, #libc_abi!
Subscribers: libcxx-commits, lldb-commits
Tags: #lldb, #libc_abi
Differential Revision: https://reviews.llvm.org/D76045
Summary:
The TargetProperties constructor invokes a series of callbacks to
prime the properties from the default ones. The one callback in
charge of updating the inferior environment was commented out
because it crashed.
The reason for the crash is that TargetProperties is a parent class
of Target and the callbacks were invoked using a Target that was
not fully initialized. This patch moves the initial callback
invocations to a separate function that can be called at the end
the Target constructor, thus preventing the crash.
One existing test had to be modified, because the initialization of
the environment properties now take place at the time the target is
created, not at the first use of the environment (usually launch
time).
The added test checks that the LaunchInfo object returned by
the target has been primed with the values from the settings.
Reviewers: jingham, labath
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D76009
Summary:
LLDB keeps statistics of how many expression evaluations are 'successful' and 'failed'
which are updated after each expression evaluation (assuming statistics are enabled).
From what I understand the idea is that this could be used to define how well LLDB's
expression evaluator is working.
Currently all expressions are considered successful unless the user passes an explicit
positive element counting to the expression command (with the `-Z` flag) and then passes
an expression that successfully evaluates to a type that doesn't support element counting.
Expressions that fail to parse, execute or any other outcome are considered successful
at the moment which means we nearly always have a 100% expression evaluation
success rate.
This patch makes that expressions that fail to parse or execute to count as failed
expressions.
We can't know whether the expression failed because of an user error
of because LLDB couldn't correctly parse/compile it, but I would argue that this is
still an improvement. Assuming that the percentage of valid user expressions stays
mostly constant over time (which seems like a reasonable assumption), then this
way we can still see if we are doing relatively better/worse from release to release.
Reviewers: davide, aprantl, JDevlieghere
Reviewed By: aprantl
Subscribers: abidh
Differential Revision: https://reviews.llvm.org/D76280
Summary: Inspired by https://reviews.llvm.org/D74636, I'm introducing a basic version of Environment in the API. More functionalities can be added as needed.
Reviewers: labath, clayborg
Subscribers: mgorny, lldb-commits, diazhector98
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D76111
Summary:
If no custom launching is used, lldb-vscode launches a program with an empty environment by default. In some scenarios, the user might want to simply use the same environment as the IDE to have a set of working environment variables (e.g. PATH wouldn't be empty). In fact, most DAPs in VSCode have this behavior by default. In other cases the user definitely needs to set their custom environment, which is already supported. To make the first case easier for the user (e.g. not having to copy the PATH to the launch.json every time they want to debug simple programs that rely on PATH), a new option is now offered. inheritEnvironment will launch the program copying its own environment, and it's just a boolean flag.
{F11347695}
Reviewers: clayborg, aadsm, diazhector98, kusmour
Subscribers: labath, JDevlieghere, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D74636
Summary:
https://reviews.llvm.org/D65363 introduced the launchCommands argument. However, it did not add
a corresponding definition in the package.json
Reviewers: clayborg, labath, kusmour, aadsm
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D76529
The fourth field in the property struct is the default unsigned or enum
value for all types, except for Array and Dictionary types. For those,
it is the element type. During the tablegen conversion, this was
incorrectly translated to DefaultValueUnsigned with a value
corresponding to the OptionValue: enum type. So for
OptionValue::eTypeString this became DefaultUnsignedValue<16>. This
patch extends the tablegen backend to understand ElementType to express
this as ElementType<"String">.
Differential revision: https://reviews.llvm.org/D76535
Summary: Inspired by https://reviews.llvm.org/D74636, I'm introducing a basic version of Environment in the API. More functionalities can be added as needed.
Reviewers: labath, clayborg
Subscribers: mgorny, lldb-commits, diazhector98
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D76111
Summary:
On Linux, when executing lldb-vscode on a remote machine, lldb-vscode doesn't die after the debug session ends. It keeps trying to read JSON input to no avail.
This diff indicates lldb-vscode to stop reading after a termination event has been processed.
Reviewers: clayborg, aadsm, kusmour
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D76314
If LLDB attaches to an already running target, then structure SBAttachInfo is
used instead of SBLaunchInfo. lldb-vscode function request_attach sets some
values to g_vsc.launch_info, however this field is then not passed anywhere, so
this action has no effect. This commit removes invocation of
SBLaunchInfo::SetDetachOnError, which has no equivalent in SBAttachInfo.
File package.json doesn't describe detachOnError property for "attach" request
type, therefore it is not needed to update it.
Differential Revision: https://reviews.llvm.org/D76351
Summary:
This patch improves step over performance for the case when we are
stepping over a call with a next-branch-breakpoint (see
https://reviews.llvm.org/D58678), and we encounter a stop during the
call. Currently, this causes the thread plan to step-out //each frame//
until it reaches the step-over range. This is a regression introduced by
https://reviews.llvm.org/D58678 (which did improve other things!). Prior
to that change, the step-over plan would always step-out just once.
With this patch, if we find ourselves stopped in a deeper stack frame
and we already have a next branch breakpoint, we simply return from the
step-over plan's ShouldStop handler without pushing the step out plan.
In my experiments this improved the time of stepping over a call that
loads 12 dlls from 14s to 5s. This was in remote debugging scenario with
10ms RTT, the call in question was Vulkan initialization
(vkCreateInstance), which loads various driver dlls. Loading those dlls
must stop on the rendezvous breakpoint, causing the perf problem
described above.
Reviewers: clayborg, labath, jingham
Reviewed By: jingham
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D76216
(This is D68010 but I also set the new parameter in LibStdcpp.cpp to fix
the Debian tests).
Summary:
Printing a summary for an empty NSPathStore2 string currently prints random bytes behind the empty string pointer from memory (rdar://55575888).
It seems the reason for this is that the SourceSize parameter in the `ReadStringAndDumpToStreamOptions` - which is supposed to contain the string
length - actually uses the length 0 as a magic value for saying "read as much as possible from the buffer" which is clearly wrong for empty strings.
This patch adds another flag that indicates if we have know the string length or not and makes this behaviour dependent on that (which seemingly
was the original purpose of this magic value).
Reviewers: aprantl, JDevlieghere, shafik
Reviewed By: aprantl
Subscribers: christof, abidh, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D68010
Currently when an expression fails to parse and we have a FixIt, we keep
the failed UserExpression around while trying to parse the expression with
applied fixits. This means that we have this rather confusing control flow:
1. Original expression created and parsing attempted.
2. Expression with applied FixIts is created and parsing attempted.
3. Original expression is destroyed and parser deconstructed.
4. Expression with applied FixIts is destroyed and parser deconstructed.
This patch just deletes the original expression so that step 2 and 3 are
swapped and the whole process looks more like just sequentially parsing two
expressions (which is what we actually do here).
Doesn't fix anything just makes the code less fragile.
Summary:
TestInlineStepping tests LLDB's ability to step in the presence of
inline frames. The testcase source has a number of functions and some
of them are marked `always_inline`.
The test is built around the assumption that the inline function will
be fully represented once inlined, but this is not true with the
current arm64 code generation. For example:
void caller() {
always_inline_function(); // Step here
}
When stppeing into `caller()` above, you might immediatly end up in
the inlines frame for `always_inline_function()`, because there might
literally be no code associated with `caller()` itself.
This patch hacks around the issue by adding an `asm volatile("nop")`
on some lines with inlined calls where we expect to be able to
step. Like so:
void caller() {
asm volatile("nop"); always_inline_function(); // Step here
}
This guarantees there is always going to be one instruction for this
line in the caller.
Reviewers: labath, jingham
Subscribers: kristof.beyls, danielkiss, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D76406
Summary:
TestBuiltinTrap fail on darwin embedded because the `__builin_trap`
builtin doesn't get any line info attached to it by clang when
building for arm64.
The test was already XFailed for linux arm(64), I presume for the same
reasons. This patch just XFails it independently of the platform.
Reviewers: labath
Subscribers: kristof.beyls, danielkiss, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D76408
This reverts commit 939ca455e7.
This failed on the debian bot for some reason:
File "/home/worker/lldb-x86_64-debian/lldb-x86_64-debian/llvm-project/lldb/test/API/functionalities/data-formatter/data-formatter-stl/libstdcpp/string/TestDataFormatterStdString.py", line 67, in test_with_run_command
"s summary wrong")
AssertionError: 'L"hello world! מזל טוב!\\0!\\0!!!!\\0\\0A\\0\\U0000fffd\\U0000fffd\\U0000fffd\\ [truncated]... != 'L"hello world! מזל טוב!"'
Diff is 2156 characters long. Set self.maxDiff to None to see it. : s summary wrong
Summary:
Printing a summary for an empty NSPathStore2 string currently prints random bytes behind the empty string pointer from memory (rdar://55575888).
It seems the reason for this is that the SourceSize parameter in the `ReadStringAndDumpToStreamOptions` - which is supposed to contain the string
length - actually uses the length 0 as a magic value for saying "read as much as possible from the buffer" which is clearly wrong for empty strings.
This patch adds another flag that indicates if we have know the string length or not and makes this behaviour dependent on that (which seemingly
was the original purpose of this magic value).
Reviewers: aprantl, JDevlieghere, shafik
Reviewed By: aprantl
Subscribers: christof, abidh, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D68010
This test was stripping a binary generated by Makefile.rules which is
potentially codesigned. Stripping invalidates the code signature, so
we might need to re-sign after stripping.
The test was stripping the binaries from the Python
code. Unfortunately, if running on darwin embedded in a context that
requires code signing, the stripping was invalidating the signature,
thus breaking the test.
This patch moves the stripping to the Makefile and resigns the
stripped binaries if required.
It was an inline test before. Clang stopped emitting line information
for the TLS initialization and the inline test didn't have a way to
break before it anymore.
This rewrites the test as a full-fldeged python test and improves the
checking of the error case to verify that the failure we are looking
for is related to the TLS setup not being complete.
The test checks that we correctly set the right number of breakpoints
when breaking into an `always_inline` function. The line of this
funstion selected for this test was the return statement, but with
recent compiler, this return statement doesn't necessarily exist after
inlining, even at O0.
Switch the breakpoint to a different line of the inline function.
Summary:
The memory history plugin for Asan creates a HistoryThread with the
recorded PC values provided by the Asan runtime. In other cases,
thoses PCs are gathered by LLDB directly.
The PCs returned by the Asan runtime are the PCs of the calls in the
backtrace, not the return addresses you would normally get when
unwinding the stack (look for a call to GetPreviousIntructionPc in
AsanGetStack).
When the above addresses are passed to the unwinder, it will subtract
1 from each address of the non zero frames because it treats them as
return addresses. This can lead to the final report referencing the
wrong line.
This patch fixes this issue by threading a flag through HistoryThread
and HistoryUnwinder that tells them to treat every frame like the
first one. The Asan MemoryHistory plugin can then use this flag.
This fixes running TestMemoryHistory on arm64 devices, although it's
hard to guarantee that the test will continue to exhibit the boundary
condition that triggers this bug.
Reviewers: jasonmolenda, kubamracek
Subscribers: kristof.beyls, danielkiss, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D76341
D63643 added these testfiles but some of the %t4dwo and %t5dwo builds
are the same as corresponding %t4 and %t5 builds. Fortunately the
testcases do PASS.
After just adding -gsplit-dwarf these both skeleton files:
tools/lldb/test/SymbolFile/DWARF/Output/debug-types-expressions.test.tmp4dwo
tools/lldb/test/SymbolFile/DWARF/Output/debug-types-expressions.test.tmp5dwo
were referencing to this one non-skeleton file:
tools/lldb/test/SymbolFile/DWARF/debug-types-expressions.dwo
Surprisingly it does not affect the other test debug-types-basic.test
probably because it compiles to .o and then links it. While
debug-types-expressions.test compiles directly to an executable.
So fixed that while keeping the direct executable compilation.
Differential Revision: https://reviews.llvm.org/D76316
This patch changes the way the StackFrame Recognizers match a certain
frame.
Until now, recognizers could be registered with a function
name but also an alternate symbol.
This change is motivated by a test failure for the Assert frame
recognizer on Linux. Depending the version of the libc, the abort
function (triggered by an assertion), could have more than two
signatures (i.e. `raise`, `__GI_raise` and `gsignal`).
Instead of only checking the default symbol name and the alternate one,
lldb will iterate over a list of symbols to match against.
rdar://60386577
Differential Revision: https://reviews.llvm.org/D76188
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
Make sure that `process` is not None before calling is_alive. Otherwise
this might result in an AttributeError: 'NoneType' object has no
attribute 'is_alive'.
Although lldb.process and friends could already be None in the past, for
example after leaving an interactive scripting session, the issue became
more prevalent after `fc1fd6bf9fcfac412b10b4193805ec5de0e8df57`.
I audited the other interface files for usages of target, process,
thread and frame, but this seems the only place where a global is used
from an SB class.
The current implementation isn't very resilient when it comes to the
output of xcrun. Currently it cannot deal with:
- Trailing newlines.
- Leading newlines and errors/warnings before the Xcode path.
- Xcode not being named Xcode.app.
This extract the logic into a helper in PlatformDarwin and fixes those
issues. It's also the first step towards removing code duplication
between the different platforms and downstream Swift.
Differential revision: https://reviews.llvm.org/D76261
Fix to get the AST we generate for function templates closer to what clang generates and expects.
We fix which FuntionDecl we are passing to CreateFunctionTemplateSpecializationInfo and we strip
template parameters from the name when creating the FunctionDecl and FunctionTemplateDecl.
These two fixes together fix asserts and ambiguous lookup issues for several cases which are added to the already existing small function template test.
This fixes issues with overloads, overloads and ADL, variadic function templates and templated operator overloads.
Differential Revision: https://reviews.llvm.org/D75761
The error_stream and result parameter were inconsistently checked for
being null, so we might as well make them references instead of crashing
in case someone passes a nullptr and hits one of the code paths that are
currently not doing a nullptr check on those parameters. Also change
output_stream for consistency.
I believe the actual opcode does not matter because the AVR architecture
is a Harvard architecture that does not support writing to program
memory. Therefore, debuggers and emulators provide hardware breakpoints.
But for some reason, this opcode must be defined or else LLDB will crash
with an assertion error.
Differential Revision: https://reviews.llvm.org/D74255
This was previously crashing due to a missing nullptr check (see
e2d8aa6bf7 ). This just adds a test that should
make sure this doesn't crash in case a user ends up in this strange setup.
The GDB replay server sanity-checks that every packet it receives
matches what it expects from the serialized packet log. This mechanism
tripped for TestReproducerAttach.py on Linux, because one of the packets
(jModulesInfo) uses run-length encoding. The replay server was comparing
the expanded incoming packet with the unexpanded packet in the log. As a
result, it claimed to have received an unexpected packet, which caused
the test to fail.
This patch addresses that issue by expanding the run-length encoding
before comparing the packets.
Differential revision: https://reviews.llvm.org/D76163
The nullptr check here was removed in 4ef50a33b1
when I replaced (nearly) all log->Print to LLDB_LOG calls (which automatically
check for this stuff). But it seems this one call escaped my sed call.
Currently working on a test that can cover this code path but we can revert
this until I have found one.
Commit [1] added a declaration of function-member
StackFrame::BehavesLikeZerothFrame but hasn't added an implementation
for the function. This commit removes this declation, because the
function is not used anywhere.
[1] 31e6dbe1c6 Fix PC adjustment in StackFrame::GetSymbolContext
Differential Revision: https://reviews.llvm.org/D75979
Patch by Anton Kolesov <Anton.Kolesov@synopsys.com>
Fix to code from https://reviews.llvm.org/D64993.
Field StackFrame::m_behaves_like_zeroth_frame was introduced in commit
[1], however that commit hasn't added a copying of the field to
UpdatePreviousFrameFromCurrentFrame, therefore the value wouldn't change
when updating frames to reflect the current situation.
The particular scenario, where this matters is following. Assume we have
function main that invokes function func1. We set breakpoint at
func1 entry and in main after the func1 call, and do not stop at
the main entry. Therefore, when debugger stops for the first time,
func1 is frame#0, while main is frame#1, thus
m_behaves_like_zeroth_frame is set to 0 for main frame. Execution is
resumed, and stops now in main, where it is now frame#0. However while
updating the frame object, m_behaves_like_zeroth_frame remains false.
This field plays an important role when calculating line information for
backtrace: for frame#0, PC is the current line, therefore line
information is retrieved for PC, however for all other frames this is
not the case - calculated PC is a return-PC, i.e. instruction after the
function call line, therefore for those frames LLDB needs to step back
by one instruction. Initial implementation did this strictly for frames
that have index != 0 (and index is updated properly in
UpdatePreviousFrameFromCurrentFrame), but m_behaves_like_zeroth_frame
added a capability for middle-of-stack frames to behave in a similar
manner. But because current code now doesn't check frame idx,
m_behaves_like_zeroth_frame must be set to true for frames with 0 index,
not only for frame that behave like one. In the described test case,
after stopping in main, LLDB would still consider frame#0 as
non-zeroth, and would subtract instruction from the PC, and would report
previous like as current line.
The error doesn't manifest itself in LLDB interpreter though - it can be
reproduced through LLDB-MI and when using SB API, but not when we
interpreter command "continue" is executed. Honestly, I didn't fully
understand why it works in interpreter, I did found that bug "fixes"
itself if I enable DEBUG_STACK_FRAMES in StackFrameList.cpp, because
that calls StackFrame::Dump and that calls
GetSymbolContext(eSymbolContextEverything), which fills the context of
frame on the first breakpoint, therefore it doesn't have to be
recalculated (improperly) on a second frame. However, on first
breakpoint symbol context is calculated for the "call" line, not the
next one, therefore it should be recalculated anyway on a second
breakpoint, and it is done correctly, even though
m_behaves_like_zeroth_frame is still incorrect, as long as
GetSymbolContext(eSymbolContextEverything) has been called.
[1] 31e6dbe1c6 Fix PC adjustment in StackFrame::GetSymbolContext
Differential Revision: https://reviews.llvm.org/D75975
Patch by Anton Kolesov <Anton.Kolesov@synopsys.com>
Ideally we'd want all shebangs to be configurable, but that's not a
viable solution. Given that lldb-dotest is already configured, we might
as well make sure it uses the correct interpreter.
Differential revision: https://reviews.llvm.org/D76167
This patch extends the reproducers to intercept calls to FindProcesses.
During capture it serializes the ProcessInstanceInfoList returned by the
API. During replay, it returns the serialized data instead of querying
the host.
The motivation for this patch is supporting the process attach workflow
during replay. Without this change it would incorrectly look for the
inferior on the host during replay and failing if no matching process
was found.
Differential revision: https://reviews.llvm.org/D75877
Add YAML traits for ArchSpec and ProcessInstanceInfo so they can be
serialized for the reproducers.
Differential revision: https://reviews.llvm.org/D76004
In addition to the commit rG352f16db87f583ec7f55f8028647b5fd8616111f,
this one fixes settings behavior on clearing - the setting should be
reverted to their default value, not an empty one.
Add YAML traits for the ConstString and FileSpec classes so they can be
serialized as part of ProcessInfo. The latter needs to be serializable
for the reproducers.
Differential revision: https://reviews.llvm.org/D76002
Since D75537 the test suite clears all settings before a test. This caused
two tests to fail:
lldb-api :: functionalities/inline-stepping/TestInlineStepping.py
lldb-api :: lang/cpp/std-function-step-into-callable/TestStdFunctionStepIntoCallable.py
The reason for that is that OptionValueRegex::Clear was setting the regex
to empty instead of the default value that was passed initially. This caused
that the target.process.thread.step-avoid-regexp setting which is used in the
tests was set to "" instead of "^std::".
This patch is just a quick fix that sets the regex back to the original value
to make the tests pass.
In total these 3 setting values have changed with D75537 and also need to be
fixed (even though they don't seem to break any tests).
target.process.thread.step-avoid-regexp (regex) -> from '^std::' to empty string
platform.module-cache-directory (file) -> from "~/.lldb/module_cache" to empty string
script-lang (enum) -> from 'default' to 'python'
offset_t is unsigned, so if the RHS is signed we get a warning from clang:
warning: comparison of integers of different signs: 'const unsigned long long' and 'const int'
Global properties are shared between debugger instances and
if a test doesn't clear changes in settings it made,
this leads to side effects in other tests.
Differential Revision: https://reviews.llvm.org/D75537
If a producer emits a nonzero segment size, `lldb` will silently read
incorrect values and crash, or do something worse later as the tuple
size is expected to be 2, rather than 3.
Neither LLVM, nor GCC produce segmented aranges, but this dangerous case
should still be checked and handled.
Reviewed by: clayborg, labath
Differential Revision: https://reviews.llvm.org/D75925
Subscribers: lldb-commits
Tags: #lldb
Most clients of SourceManager.h need to do things like turning source
locations into file & line number pairs, but this doesn't require
bringing in FileManager.h and LLVM's FS headers.
The main code change here is to sink SM::createFileID into the cpp file.
I reason that this is not performance critical because it doesn't happen
on the diagnostic path, it happens along the paths of macro expansion
(could be hot) and new includes (less hot).
Saves some includes:
309 - /usr/local/google/home/rnk/llvm-project/clang/include/clang/Basic/FileManager.h
272 - /usr/local/google/home/rnk/llvm-project/clang/include/clang/Basic/FileSystemOptions.h
271 - /usr/local/google/home/rnk/llvm-project/llvm/include/llvm/Support/VirtualFileSystem.h
267 - /usr/local/google/home/rnk/llvm-project/llvm/include/llvm/Support/FileSystem.h
266 - /usr/local/google/home/rnk/llvm-project/llvm/include/llvm/Support/Chrono.h
Differential Revision: https://reviews.llvm.org/D75406
Module.h takes 86ms to parse, mostly parsing the class itself. Avoid it
if possible. ASTContext.h depends on ExternalASTSource.h.
A few NFC changes were needed to make this possible:
- Move ASTSourceDescriptor to Module.h. This needs Module to be
complete, and seems more related to modules and AST files than
external AST sources.
- Move "import complete" bit from Module* pointer int pair to
NextLocalImport pointer. Required because PointerIntPair<Module*,...>
requires Module to be complete, and now it may not be.
Reviewed By: aaron.ballman, hans
Differential Revision: https://reviews.llvm.org/D75784
Badly-written code can combine an unrelated TypeSystem and opaque type
pointer into a CompilerType. This is particularly an issue in
swift-lldb. This patch adds an assertion mechanism that catches these
kinds of mistakes early. Because this is an assertion-only code path
there is not cost for release builds.
Differential Revision: https://reviews.llvm.org/D76011
This patch allows skipping a test based on a default setting, which is
useful when running the testsuite in different "modes" based on a
default setting. This is a feature I need for the Swift testsuite, but
I think it's generally useful.
Differential Revision: https://reviews.llvm.org/D75864
A couple of tests sporadically fail on these assertions, but the error
messages do not give a clue as to what has actually happened.
Improve them so that we can better understand what is going wrong.
The function consisted of a complicated set of conditions to compute the
address ranges which are to be disassembled (depending on the mode
selected by command line switches). This patch creates a separate
function for each mode, so that DoExecute is only left with the task of
figuring out how to dump the relevant ranges.
This is NFC-ish, except for one change in the error message, which is
actually an improvement.
Summary:
This is the only real unwinder, and things have been this way for quite
a long time. At this point, the class has accumulated so many features
it is unlikely that anyone will want to reimplement the whole thing.
The class is also fairly closely coupled (through UnwindPlans and
FuncUnwinders) with a lot of other lldb components that it is hard to
imagine a different unwinder implementation being substantially
different without reimplementing all of those.
The existing unwinding functionality is nonetheless fairly complex and
there is space for adding more structure to it, but I believe a more
worthwhile effort would be to take the existing UnwindLLDB class and try
to break it down and introduce extension/customization points, instead
of writing a brand new Unwind implementation.
Reviewers: jasonmolenda, JDevlieghere, xiaobai
Subscribers: mgorny, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D75848
This patch forces architecture "arm" if underlying os reports core
armv7l or armv8l. On linux systems 32 bit sysroot running on 64bit
AArch64 hardware reports armv7l or armv8l which is essently arm
32bit mode. This fixes 5 testcases on 32bit arm.
Summary:
The class has two pairs of functions whose functionalities differ in
only how one specifies how much he wants to disasseble. One limits the
process by the size of the input memory region. The other based on the
total amount of instructions disassembled. They also differ in various
features (like error reporting) that were only added to one of the
versions.
There are various ways in which this could be addressed. This patch
does it by introducing a helper struct called "Limit", which is
effectively a pair specifying the value that you want to limit, and the
actual limit itself.
Reviewers: JDevlieghere
Subscribers: sdardis, jrtc27, atanasyan, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D75730
This patch removes skipIf decorator from instruction counting tests.
We now use inline intruction in testing inferior to make sure that
number of instructions stays fixed. This was tested on aarch64 linux.
There is still the bug that empty lines seem to skip any following expressions
and it makes it harder to commend between all the comments. Let's make this
a normal test instead which is just slightly more verbose but can be properly
formatted.
Summary:
Compiling ObjC++ with Clang modules is usually not working well and compiling
the small debugserver with modules is not worth the trouble.
Reviewers: JDevlieghere
Reviewed By: JDevlieghere
Subscribers: mgorny, JDevlieghere, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D74891
Summary: This is currently hidden in the Host CMakeLists but we should also use this macro in other parts of LLDB where we have ObjC++ sources (see D74891)
Reviewers: JDevlieghere
Reviewed By: JDevlieghere
Subscribers: mgorny, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D75164
Summary: Provide a list of Unix signals for the tap completion for command "process signal".
Reviewers: teemperor
Subscribers: labath, jingham, JDevlieghere, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D75418
Summary:
This patch inlines all the single-line functions that we only use once in the test
and replaces the assertTrue with an assertEquals to improve the error message
when this test fails.
Reviewers: JDevlieghere
Reviewed By: JDevlieghere
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D75497
Summary:
Otherwise this code won't run on the Release+Asserts builds we have on the CI.
Fixes rdar://problem/59867885 (partly)
Reviewers: aprantl
Reviewed By: aprantl
Subscribers: JDevlieghere, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D75493
Starting with iOS 13 simulator binaries are identified with an
explicit platform in the new LC_BUILD_VERSION load command.
On older deployment targets using the LC_VERSION_MIN load commands,
this patch detects when an ios process runs on a macOS host and
updates the target triple with the "simulator" environment
accordingly.
(Patch re-applied with bugfix this time).
This is part of https://bugs.swift.org/browse/SR-11971
rdar://problem/58438125
Differential Revision: https://reviews.llvm.org/D75696
Starting with iOS 13 simulator binaries are identified with an
explicit platform in the new LC_BUILD_VERSION load command.
On older deployment targets using the LC_VERSION_MIN load commands,
this patch detects when an ios process runs on a macOS host and
updates the target triple with the "simulator" environment
accordingly.
(Patch re-applied without modifications, the bot failure was unrelated).
This is part of https://bugs.swift.org/browse/SR-11971
rdar://problem/58438125
Differential Revision: https://reviews.llvm.org/D75696
Starting with iOS 13 simulator binaries are identified with an
explicit platform in the new LC_BUILD_VERSION load command.
On older deployment targets using the LC_VERSION_MIN load commands,
this patch detects when an ios process runs on a macOS host and
updates the target triple with the "simulator" environment
accordingly.
This is part of https://bugs.swift.org/browse/SR-11971
rdar://problem/58438125
Differential Revision: https://reviews.llvm.org/D75696
The static Disassembler can be thought of as shorthands for three
operations:
- fetch an appropriate disassembler instance (FindPluginForTarget)
- ask it to dissassemble some bytes (ParseInstructions)
- ask it to dump the disassembled instructions (PrintInstructions)
The only thing that's standing in the way of this interpretation is that
the Disassemble function also does some address resolution before
calling ParseInstructions. This patch moves this functionality into
ParseInstructions so that it is available to users who call
ParseInstructions directly.
We have a test which checks that instruction-step really steps one
instruction, but the way it checks this makes it very susceptible to
codegen changes. This rewrites the test inferior to use inline assembly,
which guarantees a known sequence of instructions that the test can
check. This does mean we have to write separate assembly for each
architecture, but that is no better than having architecture-specific
assertions, which the test was already starting to accumulate.
This patch makes sure that LLDB AArch64/Linux testsuite skips
single_step_only_steps_one_instruction* tests. There is no possible
gaurantee for this test to pass and there already exists a bug report
against this bug.
Summary:
It isn't used anywhere (except on imaginary triples like
sparc-apple-ios) and it also violates plugin separation.
This patch deletes it and declares UnwindLLDB to be _the_ lldb unwinder.
Reviewers: jasonmolenda, JDevlieghere, xiaobai
Subscribers: jyknight, mgorny, krytarowski, fedor.sergeev, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D75680
The indexes need to start at 0 but in D74951 I removed the first parameter
and didn't decrement all the indexes. This patch at least makes sure that
LLDB logging no longer crashes (but it still deadlocks).
Some functions in this file only use the "target" component of an
execution context. Adjust the argument lists to reflect that.
This avoids some defensive null checks and simplifies most of the
callers.
the previously static member function took a Disassembler* argument
anyway. This renames the argument to "this". The function also always
succeeds (returns true), so I change the return type to void.
by "inlining" them into their single caller (CommandObjectDisassemble).
The functions mainly consist of long argument lists and defensive
checks. These become unnecessary after inlining, so the end result is
less code. Additionally, this makes the implementation of
CommandObjectDisassemble more uniform (first figure out what you're
going to disassemble, then actually do it), which enables further
cleanups.
Some tests set settings and don't clean them up, this leads to side effects in other tests.
The patch removes a global debugger instance with a per-test debugger to avoid such effects.
From what I see, lldb.DBG was needed to determine the platform before a test is run,
lldb.selected_platform is used for this purpose now. Though, this required adding a new function
to the SBPlatform interface.
Differential Revision: https://reviews.llvm.org/D74903
This prevents calling Breakpoint::shared_from_this of an object that is not owned by any shared_ptr.
Differential Revision: https://reviews.llvm.org/D74557
This command had nearly identical code for the "then" and "else"
branches of the "if (m_options.num_instructions != 0)" condition.
This patch factors out the common parts of the two blocks to reduce
duplication.
Haibo told me he didn't have any issues with Python 3.8 and I was able
to confirm that. Even though we don't have bot running with 3.8, I think
it safe to mark it as supported in the docs.
Summary: I don't see why we want to keep that code around.
Reviewers: #lldb, JDevlieghere
Reviewed By: #lldb, JDevlieghere
Subscribers: davide
Differential Revision: https://reviews.llvm.org/D75496
While we have some tests for this command already, they are very vague.
This is not surprising -- it's hard to make strict assertions about the
assembly if your input is a c++ source file. This means that the tests
can more-or-less only detect when the command breaks completely, and not
when there is a subtle change in meaning due to e.g. a code refactor --
which is something that I am getting ready to do.
This tests in this patch create binaries with well known data (via assembler
and yaml2obj). This means that we are able to make precise assertions
about the text that lldb is supposed to print. As some of the features
of this command are only available with a real process, I use a minidump
core file to create a sufficiently realistic process object.
Instead of a ExecutionContext*. All it needs is the target so it can
read the memory.
This removes some defensive checks from the function. I've added
equivalent checks to the callers in cases where a non-null target
pointer was not guaranteed to be available.
Summary:
Since RangeDataVector is assumed to always be sorted we can treat it as
an flattened BST and augment it with additional information about the
ranges belonging to each "subtree". By storing the maximum endpoint in
every subtree we can query for intervals in O(log n) time.
Reviewers: labath, teemperor
Reviewed By: labath
Subscribers: jarin, JDevlieghere, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D74759
Summary:
If a command from a sourced file produces asynchronous output, this
output often does not make its way to the user. This happens because the
asynchronous output machinery relies on the iohandler stack to ensure
the output does not interfere with the things the iohandler is doing.
However, if this happens near the end of the command stream then by the
time the asynchronous output is produced we may already have already
started tearing down the sourcing session. Specifically, we may already
pop the relevant iohandler, leaving the stack empty.
This patch makes sure this kind of output gets printed by adding a
fallback to IOHandlerStack::PrintAsync to print the output directly if
the stack is empty. This is safe because if we have no iohandlers then
there is nothing to synchronize.
Reviewers: JDevlieghere, clayborg
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D75454
and follow-ups:
a2ca1c2d "build: disable zlib by default on Windows"
2181bf40 "[CMake] Link against ZLIB::ZLIB"
1079c68a "Attempt to fix ZLIB CMake logic on Windows"
This changed the output of llvm-config --system-libs, and more
importantly it broke stand-alone builds. Instead of piling on more fix
attempts, let's revert this to reduce the risk of more breakages.
Summary:
This gets rid of some nesting and of the raw char* variable that caused
the memory management bug we hit recently.
This commit also removes the fallback code which should trigger when
the StopInfo provides no stop description. All currently implemented
StopInfos have a `GetDescription()` method that shouldn't return an
empty description.
Reviewers: JDevlieghere, labath, mib
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D74157
Summary:
Currently `SymbolFileDWARF::TypeSet` is a typedef to a `std::set<Type *>`.
In `SymbolFileDWARF::GetTypes` we iterate over a TypeSet variable when finding
types so that logic is non-deterministic as it depends on the actual pointer address values.
This patch changes the `TypeSet` to a `llvm::UniqueVector` which always iterates in
the order in which we inserted the types into the list.
Reviewers: JDevlieghere, aprantl
Reviewed By: JDevlieghere
Subscribers: mgrang, abidh, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D75481
Summary:
This function is (supposed) to be a list of asserts that just do a generic sanity check
on declarations we return. Right now this function is hidden behind the
LLDB_CONFIGURATION_DEBUG macro which means it will *only* be run in
debug builds (but not Release+assert builds and so on).
As we have not a single CI running in Debug build, failures in VerifyDecl are hidden
from us until someone by accident executes the tests in Debug mode on their own machine.
This patch removes the `ifdef`'s for LLDB_CONFIGURATION_DEBUG and puts
the `getAccess()` call in `VerifyDecl` behind a `#ifndef NDEBUG` to make sure
that this function is just an empty function with internal linkage when NDEBUG
is defined (so compilers should just optimize away the calls to it).
Reviewers: aprantl
Reviewed By: aprantl
Subscribers: shafik, abidh, JDevlieghere, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D75330
MathExtras.h was just wrapping SwapByteOrder.h functionality, so have
the callers use it directly. Use the MathExtras.h name (ByteSwap_NN) as
the standard naming, since it appears to be the most popular.
The lldb sanitizer bot is flagging a container-overflow error after we
introduced test TestWasm.py. MemoryCache::Read didn't behave correctly
in case of partial reads that can happen with object files whose size is
smaller that the cache size. It should return the actual number of bytes
read and not try to fill the buffer with random memory.
Module::GetMemoryObjectFile needs to be modified accordingly, to resize
its buffer to only the size that was read.
Differential Revision: https://reviews.llvm.org/D75200
Currently we only show the user that the expression failed but not
what is actually wrong with it. This just dumps the error we get
back alongside the other output to the error stream.
This should also help with finding out with why sometimees the
TestWatchLocationWithWatchSet.py test fails here on the LLDB
incremental bot on Green Dragon.
The GetOffset documentation was copied from the function above
so I completely deleted that one. The rest was just outdated
documentation that didn't keep up with renamed or changed
function parameters/return types.
Summary: This adds unit tests for FindEntryIndexesThatContain, this is done in preparation for changing the logic of the function.
Reviewers: labath, teemperor
Reviewed By: labath
Subscribers: arphaman, JDevlieghere, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D75180
Summary:
This packet is necessary to make lldb work with the remote-gdb stub in
user mode qemu when running position-independent binaries. It reports
the relative position (load bias) of the loaded executable wrt. the
addresses in the file itself.
Lldb needs to know this information in order to correctly set the load
address of the executable. Normally, lldb would be able to find this out
on its own by following the breadcrumbs in the process auxiliary vector,
but we can't do this here because qemu does not support the
qXfer:auxv:read packet.
This patch does not implement full scope of the qOffsets packet (it only
supports packets with identical code, data and bss offsets), because it
is not fully clear how should the different offsets be handled and I am
not aware of a producer which would make use of this feature (qemu will
always
<https://github.com/qemu/qemu/blob/master/linux-user/elfload.c#L2436>
return the same value for code and data offsets). In fact, even gdb
ignores the offset for the bss sections, and uses the "data" offset
instead. So, until the we need more of this packet, I think it's best
to stick to the simplest solution possible. This patch simply rejects
replies with non-uniform offsets.
Reviewers: clayborg, jasonmolenda
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D74598
Updated the patch to only fetch $pc on a Return Address-using
target only if we're in a trap frame *and* if there is a saved
location for $pc in the trap frame's unwind rules. If not,
we fall back to fetching the Return Address register (eg $lr).
Original commit msg:
Unwind past an interrupt handler correctly on arm or at pc==0
Fix RegisterContextLLDB::InitializeNonZerothFrame so that it
will fetch a FullUnwindPlan instead of falling back to the
architectural default unwind plan -- GetFullUnwindPlan knows
how to spot a jmp 0x0 that results in a fault, which may be
the case when we see a trap handler on the stack.
Fix RegisterContextLLDB::SavedLocationForRegister so that when
the pc value is requested from a trap handler frame, where we
have a complete register context available to us, don't provide
the Return Address register (lr) instead of the pc. We have
an actual pc value here, and it's pointing to the instruction
that faulted.
Differential revision: https://reviews.llvm.org/D75007
<rdar://problem/59416588>
The debugserver profile thread used to suspend itself between samples with
a usleep. When you detach or kill, MachProcess::Clear would delay replying
to the incoming packet until pthread_join of the profile thread returned.
If you are unlucky or the suspend delay is long, it could take longer than
the packet timeout for pthread_join to return. Then you would get an error
about detach not succeeding from lldb - even though in fact the detach was
successful...
I replaced the usleep with PThreadEvents entity. Then we just call a timed
WaitForEventBits, and when debugserver wants to stop the profile thread, it
can set the event bit, and the sleep will exit immediately.
Differential Revision: https://reviews.llvm.org/D75004
