This reverts a side effect introduced in the code cleanup patch D43571:
LLD started to emit empty output sections that are explicitly assigned to a segment.
This patch fixes the issue by removing the !sec.phdrs.empty() special case from
isDiscardable. As compensation, we add an early phdrs propagation step (see the inline comment).
This is similar to one that we do in adjustSectionsAfterSorting.
Differential revision: https://reviews.llvm.org/D92301
Also, for .o files, include full path as given on link command line.
Before:
lld: error: undefined symbol [...], referenced from sandbox_logging.o
After:
lld: error: undefined symbol [...], referenced from libseatbelt.a(sandbox_logging.o)
Move archiveName up to InputFile so we can consistently use toString()
to print InputFiles in diags, and pass it to the ObjFile ctor. This
matches the ELF and COFF ports.
Differential Revision: https://reviews.llvm.org/D92437
Under existing behavior discarded functions are relocated to have the start pc
0. This causes problems when debugging as they typically overlap the first
function and lldb symbol resolution frequently chooses a discarded function
instead of the correct one. Using the value -1 or -2 (depending on which DWARF
section we are writing) is sufficient to prevent lldb from resolving to these
symbols.
Reviewed By: MaskRay, yurydelendik, sbc100
Differential Revision: https://reviews.llvm.org/D91803
In addition, disallow `-lto-new-pass-manager` (see D79371).
Note: the ELF port has also adopted --no-lto-new-pass-manager
Reviewed By: aeubanks
Differential Revision: https://reviews.llvm.org/D92422
- most importantly, fix a use-after-free when using thin archives,
by putting the archive unique_ptr to the arena allocator. This
ports D65565 to MachO
- correctly demangle symbol namess from archives in diagnostics
- add a test for thin archives -- it finds this UaF, but only when
running it under asan (it also finds the demangling fix)
- make forceLoadArchive() use addFile() with a bool to have the archive
loading code in fewer places. no behavior change; matches COFF port a
bit better
Differential Revision: https://reviews.llvm.org/D92360
This is the same logic that ld64 uses to determine which sections
contain functions. This was added so that we could determine which
STABS entries should be N_FUN.
Reviewed By: clayborg
Differential Revision: https://reviews.llvm.org/D92430
This addresses a lot of the comments in {D89257}. Ideally it'd have been
done in the same diff, but the commits in between make that difficult.
This diff implements:
* N_GSYM and N_STSYM, the STABS for global and static symbols
* Has the STABS reflect the section IDs of their referent symbols
* Ensures we don't fail when encountering absolute symbols or files with
no debug info
* Sorts STABS symbols by file to minimize the number of N_OSO entries
Reviewed By: clayborg
Differential Revision: https://reviews.llvm.org/D92366
We should also set the modtime when running LTO. That will be done in a
future diff, together with support for the `-object_path_lto` flag.
Reviewed By: clayborg
Differential Revision: https://reviews.llvm.org/D91318
ld64 emits string tables which start with a space and a zero byte. We
match its behavior here since some tools depend on it.
Similar rationale as {D89561}.
Reviewed By: #lld-macho, smeenai
Differential Revision: https://reviews.llvm.org/D89639
Symbols of the same type must be laid out contiguously: following ld64's
lead, we choose to emit all local symbols first, then external symbols,
and finally undefined symbols. For each symbol type, the LC_DYSYMTAB
load command will record the range (start index and total number) of
those symbols in the symbol table.
This work was motivated by the fact that LLDB won't search for debug
info if LC_DYSYMTAB says there are no local symbols (since STABS symbols
are all local symbols). With this change, LLDB is now able to display
the source lines at a given breakpoint when debugging our binaries.
Some tests had to be updated due to local symbol names now appearing in
`llvm-objdump`'s output.
Reviewed By: #lld-macho, smeenai, clayborg
Differential Revision: https://reviews.llvm.org/D89285
Debug sections contain a large amount of data. In order not to bloat the size
of the final binary, we remove them and instead emit STABS symbols for
`dsymutil` and the debugger to locate their contents in the object files.
With this diff, `dsymutil` is able to locate the debug info. However, we need
a few more features before `lldb` is able to work well with our binaries --
e.g. having `LC_DYSYMTAB` accurately reflect the number of local symbols,
emitting `LC_UUID`, and more. Those will be handled in follow-up diffs.
Note also that the STABS we emit differ slightly from what ld64 does. First, we
emit the path to the source file as one `N_SO` symbol instead of two. (`ld64`
emits one `N_SO` for the dirname and one of the basename.) Second, we do not
emit `N_BNSYM` and `N_ENSYM` STABS to mark the start and end of functions,
because the `N_FUN` STABS already serve that purpose. @clayborg recommended
these changes based on his knowledge of what the debugging tools look for.
Additionally, this current implementation doesn't accurately reflect the size
of function symbols. It uses the size of their containing sectioins as a proxy,
but that is only accurate if `.subsections_with_symbols` is set, and if there
isn't an `N_ALT_ENTRY` in that particular subsection. I think we have two
options to solve this:
1. We can split up subsections by symbol even if `.subsections_with_symbols`
is not set, but include constraints to ensure those subsections retain
their order in the final output. This is `ld64`'s approach.
2. We could just add a `size` field to our `Symbol` class. This seems simpler,
and I'm more inclined toward it, but I'm not sure if there are use cases
that it doesn't handle well. As such I'm punting on the decision for now.
Reviewed By: clayborg
Differential Revision: https://reviews.llvm.org/D89257
* Enable PIE by default if targeting 10.6 or above on x86-64. (The
manpage says 10.7, but that actually applies only to i386, and in
general varies based on the target platform. I didn't update the
manpage because listing all the different behaviors would make for a
pretty long description.)
* Add support for `-no_pie`
* Remove `HelpHidden` from `-pie`
Reviewed By: thakis
Differential Revision: https://reviews.llvm.org/D92362
This reverts commit cf1c774d6a.
This change caused several regressions in the gdb test suite - at least
a sample of which was due to line zero instructions making breakpoints
un-lined. I think they're worth investigating/understanding more (&
possibly addressing) before moving forward with this change.
Revert "[FastISel] NFC: Clean up unnecessary bookkeeping"
This reverts commit 3fd39d3694.
Revert "[FastISel] NFC: Remove obsolete -fast-isel-sink-local-values option"
This reverts commit a474657e30.
Revert "Remove static function unused after cf1c774."
This reverts commit dc35368ccf.
Revert "[lldb] Fix TestThreadStepOut.py after "Flush local value map on every instruction""
This reverts commit 53a14a47ee.
If an object file has an undefined foo@v1, we emit a dynamic symbol foo.
This is incorrect if at runtime a shared object provides the non-default version foo@v1
(the undefined foo may bind to foo@@v2, for example).
GNU ld issues an error for this case, even if foo@v1 is undefined weak
(https://sourceware.org/bugzilla/show_bug.cgi?id=3351). This behavior makes
sense because to represent an undefined foo@v1, we have to construct a Verneed
entry. However, without knowing the defining filename, we cannot construct a
Verneed entry (Verneed::vn_file is unavailable).
This patch implements the error.
Depends on D92258
Reviewed By: grimar
Differential Revision: https://reviews.llvm.org/D92260
The symbol resolution rules for versioned symbols are:
* foo@@v1 (default version) resolves both undefined foo and foo@v1
* foo@v1 (non-default version) resolves undefined foo@v1
Note, foo@@v1 must be defined (the assembler errors if attempting to
create an undefined foo@@v1).
For defined foo@@v1 in a shared object, we call `SymbolTable::addSymbol` twice,
one for foo and the other for foo@v1. We don't do the same for object files, so
foo@@v1 defined in one object file incorrectly does not resolve a foo@v1
reference in another object file.
This patch fixes the issue by reusing the --wrap code to redirect symbols in
object files. This has to be done after processing input files because
foo and foo@v1 are two separate symbols if we haven't seen foo@@v1.
Add a helper `Symbol::getVersionSuffix` to retrieve the optional trailing
`@...` or `@@...` from the possibly truncated symbol name.
Depends on D92258
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D92259
Test the symbol resolution related to
* defined foo@@v1 and foo@v1 in object files/shared objects
* undefined foo@v1
* weak foo@@v1 and foo@v1
* visibility
* interaction with --wrap.
Reviewed By: grimar
Differential Revision: https://reviews.llvm.org/D92258
This is the #1 of 2 changes that make remarks hotness threshold option
available in more tools. The changes also allow the threshold to sync with
hotness threshold from profile summary with special value 'auto'.
This change modifies the interface of lto::setupLLVMOptimizationRemarks() to
accept remarks hotness threshold. Update all the tools that use it with remarks
hotness threshold options:
* lld: '--opt-remarks-hotness-threshold='
* llvm-lto2: '--pass-remarks-hotness-threshold='
* llvm-lto: '--lto-pass-remarks-hotness-threshold='
* gold plugin: '-plugin-opt=opt-remarks-hotness-threshold='
Differential Revision: https://reviews.llvm.org/D85809
The existing code handles this correctly and I checked that the code
in NativeInlineSiteSymbol also handles this correctly, but it was
wrong in the NativeFunctionSymbol code.
Differential Revision: https://reviews.llvm.org/D92134
They've been implemented since D87856 but since they still were
HelpHidden, the driver still warned claiming they were implemented.
Remove HelpHidden.
Use -fatal_warnings to test that the flags now don't warn. The
test depends on D91894 and D91891 to pass.
Differential Revision: https://reviews.llvm.org/D91971
Now, new mach-o lld no longer warns if the isysroot has just
usr/lib and System/Library/Frameworks but is missing usr/local/lib
and System/Frameworks.
This matches ld64 and old mach-o lld and fixes a regression from D85992.
It also fixes the only test failure in `check-lld` when running it
on an M1 Mac.
Differential Revision: https://reviews.llvm.org/D91891
clang may produce `movl x@GOTPCREL+4(%rip), %eax` when loading the high 32 bits
of the address of a global variable in -fpic/-fpie mode.
If assembled by GNU as, the fixup emits an R_X86_64_GOTPCRELX with an
addend != -4. The instruction loads from the GOT entry with an offset
and thus it is incorrect to relax the instruction.
If assembled by the integrated assembler, we emit R_X86_64_GOTPCREL for
relocations that definitely cannot be relaxed (D92114), so this patch is not
needed.
This patch disables the relaxation, which is compatible with the implementation in GNU ld
("Add R_X86_64_[REX_]GOTPCRELX support to gas and ld").
Reviewed By: grimar, jhenderson
Differential Revision: https://reviews.llvm.org/D91993
This adds support for ld.lld's --reproduce / lld-link's /reproduce:
flag to the MachO port. This flag can be added to a link command
to make the link write a tar file containing all inputs to the link
and a response file containing the link command. This can be used
to reproduce the link on another machine, which is useful for sharing
bug report inputs or performance test loads.
Since the linker is usually called through the clang driver and
adding linker flags can be a bit cumbersome, setting the env var
`LLD_REPRODUCE=foo.tar` triggers the feature as well.
The file response.txt in the archive can be used with
`ld64.lld.darwinnew $(cat response.txt)` as long as the contents are
smaller than the command-line limit, or with `ld64.lld.darwinnew
@response.txt` once D92149 is in.
The support in this patch is sufficient to create a tar file for
Chromium's base_unittests that can link after unpacking on a different
machine.
Differential Revision: https://reviews.llvm.org/D92274
Also sync help texts for the option between elf and coff ports.
Decisions:
- Do this even if /lldignoreenv is passed. /reproduce: does not affect
the main output, and this makes the env var more convenient to use.
(On the other hand, it's now possible to set this env var and forget
about it, and all future builds in the same shell will be much slower.
That's true for ld.lld, but posix shells have an easy way to set an
env var for a single command; in cmd.exe this is not possible without
contortions. Then again, lld-link runs in posix shells too.)
Original patch rebased across D68378 and D68381.
Differential Revision: https://reviews.llvm.org/D67707
Without this extra flag we can't distingish between stub functions and
functions that happen to have address 0 (relative to __table_base).
Adding this flag bit the base symbol class actually avoids growing the
SymbolUnion struct which would not be true if we added it to the
FunctionSymbol subclass (due to bitbacking).
The previous approach of setting it's table index to zero worked for
normal static relocations but not for `-fPIC` code.
See https://github.com/emscripten-core/emscripten/issues/12819
Differential Revision: https://reviews.llvm.org/D92038
In https://reviews.llvm.org/D89072 I added static const data members
to the debug subsection for globals. It skipped emitting an S_CONSTANT if it
didn't have a value, which meant the subsection could be empty.
This patch fixes the empty subsection issue.
Differential Revision: https://reviews.llvm.org/D92049
Local values are constants or addresses that can't be folded into
the instruction that uses them. FastISel materializes these in a
"local value" area that always dominates the current insertion
point, to try to avoid materializing these values more than once
(per block).
https://reviews.llvm.org/D43093 added code to sink these local
value instructions to their first use, which has two beneficial
effects. One, it is likely to avoid some unnecessary spills and
reloads; two, it allows us to attach the debug location of the
user to the local value instruction. The latter effect can
improve the debugging experience for debuggers with a "set next
statement" feature, such as the Visual Studio debugger and PS4
debugger, because instructions to set up constants for a given
statement will be associated with the appropriate source line.
There are also some constants (primarily addresses) that could be
produced by no-op casts or GEP instructions; the main difference
from "local value" instructions is that these are values from
separate IR instructions, and therefore could have multiple users
across multiple basic blocks. D43093 avoided sinking these, even
though they were emitted to the same "local value" area as the
other instructions. The patch comment for D43093 states:
Local values may also be used by no-op casts, which adds the
register to the RegFixups table. Without reversing the RegFixups
map direction, we don't have enough information to sink these
instructions.
This patch undoes most of D43093, and instead flushes the local
value map after(*) every IR instruction, using that instruction's
debug location. This avoids sometimes incorrect locations used
previously, and emits instructions in a more natural order.
This does mean materialized values are not re-used across IR
instruction boundaries; however, only about 5% of those values
were reused in an experimental self-build of clang.
(*) Actually, just prior to the next instruction. It seems like
it would be cleaner the other way, but I was having trouble
getting that to work.
Differential Revision: https://reviews.llvm.org/D91734
Enables overriding earlier --lto-whole-program-visibility.
Variant of D91583 while discussing alternate ways to identify and
handle the --export-dynamic case.
Differential Revision: https://reviews.llvm.org/D92060
Also use "unknown flag 'flag'" instead of "unknown flag: flag" for
consistency with the other ports.
Differential Revision: https://reviews.llvm.org/D91970
This patch:
- adds an ld64.lld.darwinnew symlink for lld, to go with f2710d4b57,
so that `clang -fuse-ld=lld.darwinnew` can be used to test new
Mach-O lld while it's in bring-up. (The expectation is that we'll
remove this again once new Mach-O lld is the defauld and only Mach-O
lld.)
- lets the clang driver know if the linker is lld (currently
only triggered if `-fuse-ld=lld` or `-fuse-ld=lld.darwinnew` is
passed). Currently only used for the next point, but could be used
to implement other features that need close coordination between
compiler and linker, e.g. having a diag for calling `clang++` instead
of `clang` when link errors are caused by a missing C++ stdlib.
- lets the clang driver pass `-demangle` to Mach-O lld (both old and
new), in addition to ld64
- implements -demangle for new Mach-O lld
- changes demangleItanium() to accept _Z, __Z, ___Z, ____Z prefixes
(and updates one test added in D68014). Mach-O has an extra
underscore for symbols, and the three (or, on Mach-O, four)
underscores are used for block names.
Differential Revision: https://reviews.llvm.org/D91884
llvm-symbolizer used to use the DIA SDK for symbolization on
Windows; this patch switches to using native symbolization, which was
implemented recently.
Users can still make the symbolizer use DIA by adding the `-dia` flag
in the LLVM_SYMBOLIZER_OPTS environment variable.
Differential Revision: https://reviews.llvm.org/D91814
This patch adds support for creating Guard Address-Taken IAT Entry Tables (.giats$y sections) in object files, matching the behavior of MSVC. These contain lists of address-taken imported functions, which are used by the linker to create the final GIATS table.
Additionally, if any DLLs are delay-loaded, the linker must look through the .giats tables and add the respective load thunks of address-taken imports to the GFIDS table, as these are also valid call targets.
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D87544
This is a more full featured version of ``--allow-undefined``.
The semantics of the different methods are as follows:
report-all:
Report all unresolved symbols. This is the default. Normally the
linker will generate an error message for each reported unresolved
symbol but the option ``--warn-unresolved-symbols`` can change this
to a warning.
ignore-all:
Resolve all undefined symbols to zero. For data and function
addresses this is trivial. For direct function calls, the linker
will generate a trapping stub function in place of the undefined
function.
import-functions:
Generate WebAssembly imports for any undefined functions. Undefined
data symbols are resolved to zero as in `ignore-all`. This
corresponds to the legacy ``--allow-undefined`` flag.
The plan is to followup with a new mode called `import-dynamic` which
allows for statically linked binaries to refer to both data and
functions symbols from the embedder.
Differential Revision: https://reviews.llvm.org/D79248
