Leading zeros should appear only for Iw.m output formatting.
Gw, Gw.d, and Gw.dEe output editing all map to Iw with no ".m"
(Fortran 202X 13.7.5.2.2).
Differential Revision: https://reviews.llvm.org/D159037
The output editing code paths for F and E/D output that handle
IEEE-754 infinities and NaNs fail to check for overflow of the
output field, which should cause the field to be filled with
asterisks instead. Catch these cases.
Differential Revision: https://reviews.llvm.org/D151738
Per Fortran 2018, "NAN" and "NAN()" are to be translated into quiet
NaNs, and the other forms are implementation-dependent; I've made
them quiet NaNs too. Also process signs on input NaNs, which seems
wrong but other compilers all do it, and fix some misleading template
argument names noticed along the way.
Differential Revision: https://reviews.llvm.org/D147071
Allow internal I/O to support non-default kinds of CHARACTER.
The I/O runtime design anticipated this standard feature, but
this patch is somewhat larger than I thought it would be because
many code sites had to have assumptions about units (characters
vs. bytes) brought into harmony, and some encoding utilities
had to be pulled out of IoStatementState and templatized into
their own new header file so that they are available to formatted
output code without having to "thread" an IoStatementState reference
through many call chains.
Differential Revision: https://reviews.llvm.org/D131107
The rule used by list-directed REAL output editing to select
between Ew.d and Fw.d output editing breaks down for 16-bit
floating-point data, since the number of significant decimal
digits is so low that Ew,d output editing is nearly always selected.
Cap the test so that five-digit values will be output with Fw.d
editing.
Differential Revision: https://reviews.llvm.org/D129672
When Fw.d output editing takes place with directed rounding, make sure that
nonzero values that would normally be converted to zero round up (or down,
depending on the sign) to a scaled 1.
Differential Revision: https://reviews.llvm.org/D129021
G0 output editing should never overflow an output field and fill it
with asterisks. It should also never elide the "E" in an exponent
field, even if it has more than three digits.
Differential Revision: https://reviews.llvm.org/D128396
When Ew.dEe or Gw.dEe output has an exponent requiring more than 'e'
digits, the whole output field must overflow to asterisks. The runtime
was detecting short fields and padding them with zeroes, but not
overflow.
Differential Revision: https://reviews.llvm.org/D127428
There were cases where E0.d output editing (or G0.d editing that is converted
to E0.d) would emit one or more leading blank characters; fix them.
Differential Revision: https://reviews.llvm.org/D127426
The "engineering" ENw.d output editing descriptor has some difficult
edge case behavior for values that might format into a bunch of 9's
or round up to a 1 for a given scale factor. Fix the algorithm,
and add tests to protect against regressions.
Differential Revision: https://reviews.llvm.org/D127028
When the digit count ('d') is zero in E0 editing, allow for one more
output character; otherwise, any - or + sign in the output causes
an output field overflow.
Differential Revision: https://reviews.llvm.org/D127013
Octal (O) output editing often emits an extra leading 0 digit
due to the total digit count being off by one since word sizes
aren't multiples of three bits.
Differential Revision: https://reviews.llvm.org/D127012
I'm emitting zero characters for (G0) formatting of CHARACTER values
instead of using their lengths to determine the output field width.
Differential Revision: https://reviews.llvm.org/D125056
This is a common extension, though semantics differ across
compilers. I've chosen to interpret the CHARACTER data
as if it were an arbitrary-precision integer value and
format or read it as such. This matches Intel's compilers
and nvfortran. (GNU Fortran can't handle lengths > 1 and XLF
seems to get the enddianness wrong.)
This patch generalizes the previous implementations of
B/O/Z input and output so that they'll work for arbitrary data
in memory, and then uses them for all B/O/Z input/output,
including (now) CHARACTER.
Differential Revision: https://reviews.llvm.org/D124547
Ew.d and Dw.d output edit descriptors should respect limitations from
the standard on the value of a kP scale factor with respect to the
digit count (d), at least for values of k other than zero.
Differential Revision: https://reviews.llvm.org/D124300
A recent change to implement UTF-8 encoding should have
made the encoding conditional only for CHARACTER(KIND=1)
to enable UTF-8 output vs. Latin-1 or whatever. UTF-8 output
of wider CHARACTER kinds should not be conditional (until we choose
to support UCS-16, maybe). So wider CHARACTER kinds are being
emitted with extra zero bytes; this patch fixes them.
Differential Revision: https://reviews.llvm.org/D123711
Runtime was crashing when an INTEGER passed in formatted output with
a bad edit descriptor even when the user did provide IOSTAT. Flang
is already signaling an error when facing similar error with other
types. Do the same with INTEGERs.
The input case is already signaling an error in the related input error
case.
Differential Revision: https://reviews.llvm.org/D122749
To make it easier to find things that are not yet implemented, I'm changing the
messages that appear in the compiler's output to all have the string "not yet
implemented:".
These changes apply to files in the front end. I have another set of changes
to files in the lowering code.
Differential Revision: https://reviews.llvm.org/D122355
Implements UTF-8 encoding and decoding for external units
with OPEN(ENCODING='UTF-8'). This encoding applies to default
CHARACTER values that are not 7-bit ASCII as well as to
the wide CHARACTER kinds 2 and 4. Basic testing is in place
via direct calls to the runtime I/O APIs, but serious checkout
awaits lowering support of the wide CHARACTER kinds.
Differential Revision: https://reviews.llvm.org/D122038
Advancement to new output lines was taking fixed-sized direct-access
and internal character array element lengths into account, but not
RECL= settings from OPEN statements.
Differential Revision: https://reviews.llvm.org/D120837
When an Fw.d output edit descriptor has a "d" value exactly
equal to the number of zeroes after the decimal point for a value
(e.g., 0.07 with F5.1), the Fw.d output editing code needs to
do the rounding itself to either 0.0 or 0.1 after performing
a conversion without rounding (to avoid 0.04999 rounding up twice).
Differential Revision: https://reviews.llvm.org/D113698
The 'A' edit descriptor once served as a form of raw I/O of bytes
to/from variables that weren't of type CHARACTER (which itself
didn't exist until F'77). This usage was especially common for
output of numeric variables that had been initialized with Hollerith.
Differential Revision: https://reviews.llvm.org/D112346
B/O/Z integer output editing must not reflect any sign extension
of scalar output values. Add more size-dependent OutputInteger
I/O APIs and kind instantiations of EditIntegerOutput.
Differential Revision: https://reviews.llvm.org/D111678
The algorithm for Fw.d output will drive binary to decimal conversion for
an initial fixed number of digits, then adjust that number based on the
result's exposent. For value close to a power of ten, this adjustment
process wouldn't terminate; e.g., formatting 9.999 as F10.2 would start
with 1e2, boost the digits to 2, get 9.99e1, decrease the digits, and loop.
Solve by refusing to boost the digits a second time.
Differential Revision: https://reviews.llvm.org/D107490
When a WRITE overwrites an endfile record, we need to forget
that there was an endfile record. When doing a BACKSPACE
after an explicit ENDFILE statement, the position afterwards
must be upon the endfile record.
Attempts to join list-directed delimited character input across
record boundaries was due to a bad reading of the standard
and has been deleted, now that the requirements are better understood.
This problem would cause a read attempt past EOF if a delimited
character input value was at the end of a record.
It turns out that delimited list-directed (and NAMELIST) character
output is required to emit contiguous doubled instances of the
delimiter character when it appears in the output value. When
fixed-size records are being emitted, as is the case with internal
output, this is not possible when the problematic character falls
on the last position of a record. No two other Fortran compilers
do the same thing in this situation so there is no good precedent
to follow.
Because it seems least wrong, with this patch we now emit one copy
of the delimiter as the last character of the current record and
another as the first character of the next record. (The
second-least-wrong alternative might be to flag a runtime error,
but that seems harsh since it's not an explicit error in the standard,
and the output may not have to be usable later as input anyway.)
Consequently, the output is not suitable for use as list-directed or
NAMELIST input.
If a later standard were to clarify this case, this behavior will of
course change as needed to conform.
Differential Revision: https://reviews.llvm.org/D106695
Add InputNamelist and OutputNamelist as I/O data transfer APIs
to be used with internal & external list-directed I/O; delete the
needless original namelist-specific Begin... calls.
Implement NAMELIST output and input; add basic tests.
Differential Revision: https://reviews.llvm.org/D101931
Always emit the letter 'E' in list-directed REAL output;
the library was omitting it for exponents greater than 99,
as should be done for E and D formatting of large exponents
without an Ed exponent digit count.
Differential Revision: https://reviews.llvm.org/D93319
MSVC does not support a distinct 80-bit extended precision
"long double" type. Rework the I/O runtime to avoid using
native C/C++ type names. Centralize the mappings between
the KIND= type parameters of REAL and their binary precisions
in the common real.h header file, and use KIND type parameter
values rather than binary precisions for clarity where
appropriate.
This patch, if successful, should obviate the need for
Differential review D88511.
(This patch anticipates a successful review of D88688, which
fixes the function that maps each kind of real to its maximum
number of significant decimal digits.)
Differential revision: https://reviews.llvm.org/D88752
The sign of the scaling factor was misinterpreted for output
as meaning what it does for input. To be correct, they
should cancel each other out.
print '(1P,F4.3)', 1. ! printed 0.1 but should print 10.0
Differential revision: https://reviews.llvm.org/D88610
Tweak binary->decimal conversions to avoid an integer multiplication
in a hot loop to improve readability and get a minor (~5%) speed-up.
Use native integer division by constants for more readability, too,
since current build compilers seem to optimize it correctly now.
Delete the now needless temporary work-around facility in
Common/unsigned-const-division.h.
Differential revision: https://reviews.llvm.org/D88604
The estimation of the decimal exponent needs to allow for all
'd' of the requested significant digits.
Also accept a plus sign on a "+kP" scaling factor in a format.
Differential revision: https://reviews.llvm.org/D88618
Summary: For Lw output editing, emit (w-1) blanks before the T or the F.
Reviewed By: sscalpone, PeteSteinfeld
Differential Revision: https://reviews.llvm.org/D84059
flang/module only contains Fortran files and one is a .h so disable
formatting on that directory.
Differential Revision: https://reviews.llvm.org/D82989
Fix F output editing in the Fortran runtime so that it
respects the 'd' count of digits after the decimal mark.
Reviewed By: tskeith
Differential Revision: https://reviews.llvm.org/D82242
Summary:
Fix decimal formatting of 80-bit x87 values; the calculation ofnearest neighbor values failed to account for the explicitmost significant bit in that format.
Replace MultiplyByRounded with MultiplyBy in binary->decimal conversions,
since rounding won't happen and the name was misleading; then remove
dead code, and migrate LoseLeastSignificantDigit() from one source file
to another where it's still needed.
Reviewers: tskeith, sscalpone, jdoerfert, DavidTruby
Reviewed By: tskeith
Subscribers: llvm-commits, flang-commits
Tags: #flang, #llvm
Differential Revision: https://reviews.llvm.org/D79345
Scan FORMAT strings locally to avoid C++ binary runtime dependence when computing deepest parenthesis nesting
Remove a dependency on ostream from runtime
Remove remaining direct external references from runtime to C++ library binaries
Remove runtime dependences on lib/common
SetPos() and SetRec()
Instantiate templates for input
Begin input; rearrange locking, deal with CLOSE races
View()
Update error message in test to agree with compiler change
First cut at real input
More robust I/O runtime error handling
Debugging of REAL input
Add iostat.{h,cpp}
Rename runtime/numeric-* to runtime/edit-*
Move templates around, templatize integer output editing
Move LOGICAL and CHARACTER output from io-api.cpp to edit-output.cpp
Change pointer argument to reference
More list-directed input
Complex list-directed input
Use enum class Direction rather than bool for templates
Catch up with changes to master
Undo reformatting of Lower code
Use record number instead of subscripts for internal unit
Unformatted sequential backspace
Testing and debugging
Dodge bogus GCC warning
Add <cstddef> for std::size_t to fix CI build
Address review comments
Original-commit: flang-compiler/f18@50406b3496
Reviewed-on: https://github.com/flang-compiler/f18/pull/1053
