Summary:
MergeFrom was updating the architecture if the target triple did not
have it set. However, it was leaving the core field as invalid. This
resulted in assertion failures in core file tests as a missing core
meant we were unable to compute the address byte size properly.
Add a unit test for the new behaviour.
Reviewers: jingham, clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D32221
llvm-svn: 300836
The break the linux bots (and probably any other machine which would
run the test suite in a massively parallel way). The problem is that it
can happen that we only successfully create an IPv6 listening socket
(because the relevant IPv4 port is used by another process) and then the
connecting side attempts to connect to the IPv4 port and fails.
It's not very obvious how to fix this problem, so I am reverting this
until we come up with a solution.
llvm-svn: 300669
Summary: This patch adds IPv6 support to debugserver. It follows a similar pattern to the changes proposed for LLDB/Host except that the listen implementation is only with kqueue(2) because debugserver is only supported on Darwin.
Reviewers: jingham, jasonmolenda, clayborg
Reviewed By: clayborg
Subscribers: mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D31824
llvm-svn: 300580
Summary:
This patch adds IPv6 support to LLDB/Host's TCP socket implementation. Supporting IPv6 involved a few significant changes to the implementation of the socket layers, and I have performed some significant code cleanup along the way.
This patch changes the Socket constructors for all types of sockets to not create sockets until first use. This is required for IPv6 support because the socket type will vary based on the address you are connecting to. This also has the benefit of removing code that could have errors from the Socket subclass constructors (which seems like a win to me).
The patch also slightly changes the API and behaviors of the Listen/Accept pattern. Previously both Listen and Accept calls took an address specified as a string. Now only listen does. This change was made because the Listen call can result in opening more than one socket. In order to support listening for both IPv4 and IPv6 connections we need to open one AF_INET socket and one AF_INET6 socket. During the listen call we construct a map of file descriptors to addrin structures which represent the allowable incoming connection address. This map removes the need for taking an address into the Accept call.
This does have a change in functionality. Previously you could Listen for connections based on one address, and Accept connections from a different address. This is no longer supported. I could not find anywhere in LLDB where we actually used the APIs in that way. The new API does still support AnyAddr for allowing incoming connections from any address.
The Listen implementation is implemented using kqueue on FreeBSD and Darwin, WSAPoll on Windows and poll(2) everywhere else.
Reviewers: zturner, clayborg
Subscribers: jasonmolenda, labath, lldb-commits, emaste
Differential Revision: https://reviews.llvm.org/D31823
llvm-svn: 300579
Summary:
This patch refactors the CMake build system's support for building debugserver to allow us to build the majority of debugserver's sources into the debugserverCommon library which can then be reused by unit tests.
The first unit test I've written tests debug server's ability to accept incoming connections from LLDB. The test forks the process, and one side creates a listening socket using debugserver's socket API, the other side creates a transmitting socket using LLDB's TCPSocket class.
I have no clue where to even start getting this connected into the LLDB Xcode project, so for now these tests are CMake-only.
Reviewers: zturner, labath, jasonmolenda
Subscribers: lldb-commits, mgorny
Differential Revision: https://reviews.llvm.org/D31357
llvm-svn: 300111
Current implementation of CPlusPlusLanguage::MethodName::Parse() doesn't
get anywhere close to covering full extent of possible function declarations.
It causes incorrect behavior in avoid-stepping and sometimes messes
printing of thread backtrace.
This change implements more methodical parsing logic based on clang
lexer and simple recursive parser.
Examples:
void std::vector<Class, std::allocator<Class>>::_M_emplace_back_aux<Class const&>(Class const&)
void (*&std::_Any_data::_M_access<void (*)()>())()
Previous version of this change (D31451) was rolled back due to an issue
with Objective-C selectors being incorrectly recognized as a C++ identifier.
Differential Revision: https://reviews.llvm.org/D31451
llvm-svn: 299721
This caused a failure in the test case:
functionalities/breakpoint/objc/TestObjCBreakpoints.py
When we are parsing up names we stick interesting parts of the names
in various buckets, one of which is the ObjC selector bucket. The new
C++ name parser must be interfering with this process somehow.
<rdar://problem/31439305>
llvm-svn: 299489
Current implementation of CPlusPlusLanguage::MethodName::Parse() doesn't
get anywhere close to covering full extent of possible function declarations.
It causes incorrect behavior in avoid-stepping and sometimes messes
printing of thread backtrace.
This change implements more methodical parsing logic based on clang
lexer and simple recursive parser.
Examples:
void std::vector<Class, std::allocator<Class>>::_M_emplace_back_aux<Class const&>(Class const&)
void (*&std::_Any_data::_M_access<void (*)()>())()
Differential Revision: https://reviews.llvm.org/D31451
llvm-svn: 299374
Summary:
This aims to verify the validity of the response from the debugging
server in GDBRemoteCommunicationClient::GetMemoryRegionInfo. I was
working with ds2 (https://github.com/facebook/ds2) and encountered a bug
that caused the server's response to have a 'size' value of 0, which
caused lldb to behave incorrectly.
Reviewers: k8stone, labath, clayborg
Reviewed By: labath, clayborg
Subscribers: clayborg, sas, lldb-commits
Differential Revision: https://reviews.llvm.org/D31485
Change by Alex Langford <apl@fb.com>
llvm-svn: 299239
GetNormalizedPath seems to be slow, so it's worth
shortcutting it if possible. This change does so
when the filenames and not equal and we can tell
GetNormalizedPath would not make them equal.
Also added a test for "." final component since that
was missing.
llvm-svn: 298876
This was causing a test failure in one of LLDB's tests which
specifically dealt with a limitation in LLVM's implementation
of home_directory() that LLDB's own implementation had worked
around.
This limitation has been addressed in r298513 on the LLVM side,
so the failing test (which is now unnecessary as the limitation
no longer exists) was removed in r298519, allowing this patch to
be re-submitted without modification.
llvm-svn: 298526
Summary:
ProcFileReader is the cause of the dependency from Host to ProcessLinux
module. Since it's interface is also obsolete (ReadIntoDataBuffer is
trivially replaceable by llvm::MemoryBuffer functions and
ProcessLineByLine is trivially implementable with StringRefs), instead
of moving it around I'm planning to obliterate it. This is the first
step, where I remove a couple of occurences in linux/Host.cpp, and
modernize some code around that.
I have introduced linux/Support.h, which holds two utility functions
now, whose resposibility is to construct the appropriate proc file names
-- the only useful feature of ProcFileReader.
I add a couple of tests for these functions, and for
Host::GetProcessInfo. It's worth noting that these are the first
host-specific unit tests in lldb.
Reviewers: zturner, eugene
Subscribers: srhines, lldb-commits, mgorny
Differential Revision: https://reviews.llvm.org/D30942
llvm-svn: 297843
Summary:
previously we switched to llvm streams for log output, this completes
the switch for the error streams.
I also clean up the includes and remove the unused argument from
DisableAllLogChannels().
This required adding a bit of boiler plate to convert the output in the
command interpreter, but that should go away when we switch command
results to use llvm streams as well.
Reviewers: zturner, eugene
Subscribers: lldb-commits, emaste
Differential Revision: https://reviews.llvm.org/D30894
llvm-svn: 297812
One of the file name templates was occasionally generating the name
"fooa***", which conflicted with the one of the tests expectation that
there is only one item beginning with "fooa".
There doesn't seem to be a good reason for using random file templates
here, so just switch to a fixed set of files to increase
reproducibility.
llvm-svn: 297743
This reverts commit a6a29374662716710f80c8ece96629751697841e.
It has a few compilation failures that I don't have time to fix
at the moment.
llvm-svn: 297589
There were a couple of problems with this function on Windows. Different
separators and differences in how tilde expressions are resolved for
starters, but in addition there was no clear indication of what the
function's inputs or outputs were supposed to be, and there were no tests
to demonstrate its use.
To more easily paper over the differences between Windows paths,
non-Windows paths, and tilde expressions, I've ported this function to use
LLVM-based directory iteration (in fact, I would like to eliminate all of
LLDB's directory iteration code entirely since LLVM's is cleaner / more
efficient (i.e. it invokes fewer stat calls)). and llvm's portable path
manipulation library.
Since file and directory completion assumes you are referring to files and
directories on your local machine, it's safe to assume the path syntax
properties of the host in doing so, so LLVM's APIs are perfect for this.
I've also added a fairly robust set of unit tests. Since you can't really
predict what users will be on your machine, or what their home directories
will be, I added an interface called TildeExpressionResolver, and in the
unit test I've mocked up a fake implementation that acts like a unix
password database. This allows us to configure some fake users and home
directories in the test, so we can exercise all of those hard-to-test
codepaths that normally otherwise depend on the host.
Differential Revision: https://reviews.llvm.org/D30789
llvm-svn: 297585
Summary:
This fixes two threading issues in the logging code. The access to the
mask and options flags had data races when we were trying to
enable/disable logging while another thread was writing to the log.
Since we can log from almost any context, and we want it to be fast, so
I avoided locking primitives and used atomic variables instead. I have
also removed the (unused) setters for the mask and flags to make sure
that the only way to set them is through the enable/disable channel
functions.
I also add tests, which when run under tsan, verify that the use cases
like "doing an LLDB_LOGV while another thread disables logging" are
data-race-free.
Reviewers: zturner, clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D30702
llvm-svn: 297368
If QPassSignals packaet is supported by lldb-server, lldb-client will
utilize it and ask the server to ignore signals that don't require stops
or notifications.
Such signals will be immediately re-injected into inferior to continue
normal execution.
Differential Revision: https://reviews.llvm.org/D30520
llvm-svn: 297231
This functionality is subsumed by DataBufferLLVM, which is
also more efficient since it will try to mmap. However, we
don't yet support mmaping writable private sections, and in
some cases we were using ReadFileContents and then modifying
the buffer. To address that I've added a flag to the
DataBufferLLVM methods that allow you to map privately, which
disables the mmaping path entirely. Eventually we should teach
DataBufferLLVM to use mmap with writable private, but that is
orthogonal to this effort.
Differential Revision: https://reviews.llvm.org/D30622
llvm-svn: 297095
it was accessing the details of the Log class directly. Let it go
through the channel class instead.
This also discovered a bug when we were setting but not clearing the log
options when enabling a channel.
llvm-svn: 297053
All references to Host and Core have been removed, so this
class can now safely be lowered into Utility.
Differential Revision: https://reviews.llvm.org/D30559
llvm-svn: 296909
Prior to MSVC 2015 we had to manually include this header any
time we were going to include <thread> or <future> due to a
bug in MSVC's STL implementation. This has been fixed in MSVC
for some time now, and we require VS 2015 minimum, so we can
remove this across all subprojects.
llvm-svn: 296906
Summary:
Use StringRef and ArrayRef where possible. This adds an accessor to the
Args class to get a view of the arguments as ArrayRef<const char *>.
Reviewers: zturner
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D30402
llvm-svn: 296592
load_size should be 64-bit unconditionally to match the underlying API.
This makes sure the MAX value correctly signals to auto-detect the file
size when mmap()ing.
llvm-svn: 296334
The channel refactor introduced a regression where we were not honoring
the log options passed when enabling the channel. Fix that and add a
test.
llvm-svn: 296329
After a series of patches on the LLVM side to get the mmaping
code up to compatibility with LLDB's needs, it is now ready
to go, which means LLDB's custom mmapping code is redundant.
So this patch deletes it all and uses LLVM's code instead.
In the future, we could take this one step further and delete
even the lldb DataBuffer base class and rely entirely on
LLVM's facilities, but this is a job for another day.
Differential Revision: https://reviews.llvm.org/D30054
llvm-svn: 296159
Summary:
The code was attempting to copy the shared pointer member in order to
guarantee atomicity, but this is not enough. Instead, protect the
pointer with a proper read-write mutex.
This bug was present here for a long time, but my recent refactors must
have altered the timings slightly, such that now this fails fairly often
when running the tests: the test runner runs the "log disable" command
just as the thread monitoring the lldb-server child is about to report
that the server has exited.
I add a test case for this. It's not possible to reproduce the race
deterministically in normal circumstances, but I have verified that
before the fix, the test failed when run under tsan, and was running
fine afterwards.
Reviewers: clayborg, zturner
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D30168
llvm-svn: 295712
Summary:
I originally set out to move the NameMatches closer to the relevant
function and add some unit tests. However, in the process I've found a
couple of bugs in the implementation:
- the early exits where not always correct:
- (test==pattern) does not mean the match will always suceed because
of regular expressions
- pattern.empty() does not mean the match will fail because the "" is
a valid prefix of any string
So I cleaned up those and added some tests. The only tricky part here
was that regcomp() implementation on darwin did not recognise the empty
string as a regular expression and returned an REG_EMPTY error instead.
The simples fix here seemed to be to replace the empty expression with
an equivalent non-empty one.
Reviewers: clayborg, zturner
Subscribers: mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D30094
llvm-svn: 295651
The way of injecting an error into the printf call was not working on
darwin - the C library still happily format the character. It only
returns an error after we use a wide character that does not fit into a
single byte, so switch the test to use that.
llvm-svn: 295443
Changes wrt. previous version:
- add #include <atomic>: fix build on windows
- add extra {} around the string literals used to initialize
llvm::StringLiteral: fix gcc build
llvm-svn: 295442
