Replace semantics::SymbolSet with alternatives that clarify
whether the set should order its contents by source position
or not. This matters because positionally-ordered sets must
not be used for Symbols that might be subjected to name
replacement during name resolution, and address-ordered
sets must not be used (without sorting) in circumstances
where the order of their contents affects the output of the
compiler.
All set<> and map<> instances in the compiler that are keyed
by Symbols now have explicit Compare types in their template
instantiations. Symbol::operator< is no more.
Differential Revision: https://reviews.llvm.org/D98878
Create test fixture for runtime tests which enables verification
of failure cases. Test some runtime IO APIs for failure cases.
Support testing efforts in D98303. Expand on effort discussed
in D98601.
Reviewed By: awarzynski
Differential Revision: https://reviews.llvm.org/D98652
Adds support for `-fget-symbols-sources` in the new Flang driver. All
relevant tests are updated to use the new driver when
`FLANG_BUILD_NEW_DRIVER` is set.
`RUN` lines in tests are updated so `-fsyntax-only`
comes before `-fget-symbols-sources`. That's because:
* both `-fsyntax-only` and `-fget-symbols-sources` are
action flags, and
* the new driver, flang-new, will only consider the right-most
action flag.
In other words, this change is needed so that the tests work with both
`f18` (requires both flags) and `flang-new` (only considers the last
action flag).
Differential Revision: https://reviews.llvm.org/D98191
Added basic parsing/sema/serialization support for interop directive.
Support for the 'init' clause.
Differential Revision: https://reviews.llvm.org/D98558
1. Generate the mapping for clauses between the parser class and the
corresponding clause kind for OpenMP and OpenACC using tablegen.
2. Add a common function to get the OmpObjectList from the OpenMP
clauses to avoid repetition of code.
Reviewed by: Kiranchandramohan @kiranchandramohan , Valentin Clement @clementval
Differential Revision: https://reviews.llvm.org/D98603
In parser::AllCookedSources, implement a map from CharBlocks to
the CookedSource instances that they cover. This permits a fast
Find() operation based on std::map::equal_range to map a CharBlock
to its enclosing CookedSource instance.
Add a creation order number to each CookedSource. This allows
AllCookedSources to provide a Precedes(x,y) predicate that is a
true source stream ordering between two CharBlocks -- x is less
than y if it is in an earlier CookedSource, or in the same
CookedSource at an earlier position.
Add a reference to the singleton SemanticsContext to each Scope.
All of this allows operator< to be implemented on Symbols by
means of a true source ordering. From a Symbol, we get to
its Scope, then to the SemanticsContext, and then use its
AllCookedSources reference to call Precedes().
Differential Revision: https://reviews.llvm.org/D98743
`parser::AllocateObject` and `parser::PointerObject` can be represented
as typed expressions once analyzed. This simplifies the work for parse-tree
consumers that work with typed expressions to deal with allocatable and
pointer objects such as lowering.
This change also makes it easier to add typedExpr in the future by
automatically handling nodes that have this member when possible.
Changes:
- Add a `mutable TypedExpr typedExpr` field to `parser::PointerObject` and `parser::AllocateObject`.
- Add a `parser::HasTypedExpr<T>` helper to better share code relating to typedExpr in the parse tree.
- Add hooks in `semantics::ExprChecker` for AllocateObject and PointerObject nodes, and use
ExprOrVariable on it to analyze and set the tyedExpr field during
expression analysis. This required adding overloads for `AssumedTypeDummy`.
- Update check-nullify.cpp and check-deallocate.cpp to not re-analyze the StructureComponent but to
use the typedExpr field instead.
- Update dump/unparse to use HasTypedExpr and use the typedExpr when there is one.
Differential Revision: https://reviews.llvm.org/D98256
Implement INDEX in the runtime, reusing some infrastructure
(with generalization and renaming as needed) put into place
for its cousins SCAN and VERIFY.
I did not implement full Boyer-Moore substring searching
for the forward case, but did accelerate some advancement on
mismatches.
I (re)implemented unit testing for INDEX in the new gtest
framework, combining it with the tests that have recently
been ported to gtest for SCAN and VERIFY.
Differential Revision: https://reviews.llvm.org/D98553
The build was putting .mod files for intrinsic modules in
tools/flang/include/flang but the install puts them in include/flang,
as does the out-of-tree build. This confused things for the driver.
This change makes the build consistent with the install and simplifies
the flang script accordingly.
Also, clean up the cmake commands for building the .mod files.
Differential Revision: https://reviews.llvm.org/D98522
An older version of a function (Fortran::semantics::FindFunctionResult) was
left in flang/lib/Semantics/tools.cpp, and this breaks the static library
build due to a conflict with the intended final version in another
file and library. Remove the old code.
Differential Revision: https://reviews.llvm.org/D98568
Fortran permits a reference to a function whose result is a pointer
to be used as a definable variable in any context where a
designator could appear. This patch wrings out remaining bugs
with such usage and adds more testing.
The utility predicate IsProcedurePointer(expr) had a misleading
name which has been corrected to IsProcedurePointerTarget(expr).
Differential Revision: https://reviews.llvm.org/D98555
Make error message descriptors on runtime DE/ALLOCATE API calls constant.
Fix a bug in error message truncation/padding.
Differential Revision: https://reviews.llvm.org/D98551
I changed the declaration of symbolCount_ in the type Symbols to be
static to avoid possible problems in the future when we might have
multiple objects of type Symbols. Thanks to Peter for pointing out the
need for this change.
Differential Revision: https://reviews.llvm.org/D98357
This allows for storage instances to store data that isn't uniqued in the context, or contain otherwise non-trivial logic, in the rare situations that they occur. Storage instances with trivial destructors will still have their destructor skipped. A consequence of this is that the storage instance definition must be visible from the place that registers the type.
Differential Revision: https://reviews.llvm.org/D98311
If you specify a type-bound procedure with an alternate return, there
will be no symbol associated with that dummy argument. In such cases,
the compiler's list of dummy arguments will contain a nullptr. In our
analysis of the PASS arguments of type-bound procedures, we were
assuming that all dummy arguments had non-null symbols associated with
them and were using that assumption to get the name of the dummy
argument. This caused the compiler to try to dereference a nullptr.
I fixed this by explicitly checking for a nullptr and, in such cases, emitting
an error message. I also added tests that contain type-bound procedures with
alternate returns in both legal and illegal constructs to ensure that semantic
analysis is working for them.
Differential Revision: https://reviews.llvm.org/D98430
You can define a base type with a type-bound procedure which is erroneously
missing a NOPASS attribute and then define another type that extends the base
type and overrides the erroneous procedure. In this case, when we perform
semantic checking on the overriding procedure, we verify the "pass index" of
the overriding procedure. The attempt to get the procedure's pass index fails
a call to CHECK().
I fixed this by calling SetError() on the symbol of the overridden procedure in
the base type. Then, I check HasError() before executing the code that invokes
the failing call to CHECK(). I also added a test that will cause the compiler
to fail the call to CHECK() without this change.
Differential Revision: https://reviews.llvm.org/D98355
In https://reviews.llvm.org/D98283, the RUN line in pre-fir-tree04.f90
was updated to use `%flang_fc1` instead of `%f18` (so that the test is
shared between the old and the new driver). Unfortunately, the new
driver does not know yet how to find standard intrinsics modules. As a
result, the test fails when `FLANG_BUILD_NEW_DRIVER` is set to On.
I'm restoring the original RUN line. This is rather straightforward, so
sending without a review. This should make Flang builders happy.
The PFT has been updated to support Fortran 77.
clang-tidy cleanup.
Authors: Val Donaldson, Jean Perier, Eric Schweitz, et.al.
Differential Revision: https://reviews.llvm.org/D98283
This patch adds `-fdebug-dump-parsing-log` in the new driver. This option is
semantically identical to `-fdebug-instrumented-parse` in `f18` (the
former is added as an alias in `f18`).
As dumping the parsing log makes only sense for instrumented parses, we
set Fortran::parser::Options::instrumentedParse to `True` when
`-fdebug-dump-parsing-log` is used. This is consistent with `f18`.
To facilitate tweaking the configuration of the frontend based on the
action being requested, `setUpFrontendBasedOnAction` is introduced in
CompilerInvocation.cpp.
Differential Revision: https://reviews.llvm.org/D97457
Until now we've been maintaining 2 test directories for Flang's drivers:
* test/Driver for `f18` (the current driver)
* test/Flang-Driver for `flang-new` (the new driver)
As we have started sharing tests between the drivers, this separation is
no longer required. This patch merges the two test directories. As
suggested in the review, moving forward we'll avoid having tests
specifically for the old driver.
A few notable changes:
* Driver/version-test.f90 and Driver/no-files.f90 are deleted. The
versions for the new driver are more robust, but tricky to share.
* Driver/write-module.f90 is deleted in favour of
Flang-Driver/write-module.f90 (see https://reviews.llvm.org/D97197
for more context)
Differential Revision: https://reviews.llvm.org/D98257
We have a "<" operator defined on the type semantics::Symbol that's based on
the symbols' locations in the cooked character stream. This is potentially
problematic when comparing symbols from .mod files when the cooked character
streams themselves might be allocated to varying memory locations.
This change fixes that by using the order in which symbols are created as the
basis for the "<" operator. Thanks to Tim and Peter for consultation on the
necessity of doing this and the idea for what to use as the basis of the sort.
This change in the "<" operator changed the expected results for three of the
tests. I manually inspected the new results, and they look OK to me. The
differences in data05.f90 and typeinfo01.f90 are entirely the order, offsets,
and sizes of the derived type components. The changes in resolve102.f90 are
due to the new, different "<" operator used for sorting.
Differential Revision: https://reviews.llvm.org/D98225
This patch refactors include-module.f90:
* rename the test file as use-module.f90 to better highlight which
driver feature is being tested
* move tests for diagnostics to use-module-error.f90 (it tests that
`-J/-module-dir` can only be used once)
* make sure that `f18` is tested when `FLANG_BUILD_NEW_DRIVER` is
set to `Off`
* add tests for when all module files are successfully discovered and
loaded
With this patch, there should be a clear separation into 3 scenarios in
use-module.f90:
* Everything is OK
* One module file wasn't found (missing include path for
basictestingmoduletwo.mod)
* Two module files are found, but the test requires
`basictestingmoduleone.mod` from both `Inputs` and `Inputs/module-dir`.
Only the latter is found.
Reviewed By: tskeith
Differential Revision: https://reviews.llvm.org/D97197
Move character tests to gtest, according to reviews from revision
D97349. Create a new temporary directory parallel to old runtime
unittests directory to facilitate the transition. Once patches for all
tests have been accepted using GTest, the old directory may be removed.
The new directory is required because LLVM's CMake unit test
infrastructure requires that the test depends on all source files in
the `CMAKE_CURRENT_SOURCE_DIR` directory.
Reviewed By: awarzynski
Differential Revision: https://reviews.llvm.org/D97403
When we have a subprogram that has been determined to contain errors, we do not
perform name resolution on its execution part. In this case, if the subprogram
contains a NULLIFY statement, the parser::Name of a pointer object in a NULLIFY
statement will not have had name resolution performed on it. Thus, its symbol
will not have been set. Later, however, we do semantic checking on the NULLIFY
statement. The code that did this assumed that the parser::Name of the
pointer object was non-null.
I fixed this by just removing the null pointer check for the "symbol" member of
the "parser::Name" of the pointer object when doing semantic checking for
NULLIFY statements. I also added a test that will make the compiler crash
without this change.
Differential Revision: https://reviews.llvm.org/D98184
Add diagnostic tests with fir-opt for the diagnostics emitted by the ops verifier
Reviewed By: jeanPerier
Differential Revision: https://reviews.llvm.org/D97996
Add support for the following Fortran dialect options:
- -default*
- -flarge-sizes
It also adds two test cases:
# For checking whether `flang-new` is passing options correctly to `flang-new -fc1`.
# For checking if `fdefault-` arguments are processed properly.
Also moves the Dialect related option parsing to a dedicated function
and adds a member `defaultKinds()` to `CompilerInvocation`
Depends on: D96032
Differential Revision: https://reviews.llvm.org/D96344
There is no need for the interface implementations to be exposed, opaque
registration functions are sufficient for all users, similarly to passes.
Reviewed By: mehdi_amini
Differential Revision: https://reviews.llvm.org/D97852
We were allowing procedures with the MODULE prefix to be declared at the global
scope. This is prohibited by C1547 and was causing an internal check of the
compiler to fail.
I fixed this by adding a check. I also added a test that would trigger a crash
without this change.
Differential Revision: https://reviews.llvm.org/D97875
It's possible to define a procedure whose interface depends on a procedure
which has an interface that depends on the original procedure. Such a circular
definition was causing the compiler to fall into an infinite loop when
resolving the name of the second procedure. It's also possible to create
circular dependency chains of more than two procedures.
I fixed this by adding the function HasCycle() to the class DeclarationVisitor
and calling it from DeclareProcEntity() to detect procedures with such
circularly defined interfaces. I marked the associated symbols of such
procedures by calling SetError() on them. When processing subsequent
procedures, I called HasError() before attempting to analyze their interfaces.
Unfortunately, this did not work.
With help from Tim, we determined that the SymbolSet used to track the
erroneous symbols was instantiated using a "<" operator which was defined using
the location of the name of the procedure. But the location of the procedure
name was being changed by a call to ReplaceName() between the times that the
calls to SetError() and HasError() were made. This caused HasError() to
incorrectly report that a symbol was not in the set of erroneous symbols.
I fixed this by changing SymbolSet to be an unordered set that uses the
contents of the name of the symbol as the basis for its hash function. This
works because the contents of the name of the symbol is preserved by
ReplaceName() even though its location changes.
I also fixed the error message used when reporting recursively defined
dummy procedure arguments by removing extra apostrophes and sorting the
list of symbols.
I also added tests that will crash the compiler without this change.
Note that the "<" operator is used in other contexts, for example, in the map
of characterized procedures, maps of items in equivalence sets, maps of
structure constructor values, ... All of these situations happen after name
resolution has been completed and all calls to ReplaceName() have already
happened and thus are not subject to the problem I ran into when ReplaceName()
was called when processing procedure entities.
Note also that the implementation of the "<" operator uses the relative
location in the cooked character stream as the basis of its implementation.
This is potentially problematic when symbols from diffent compilation units
(for example symbols originating in .mod files) are put into the same map since
their names will appear in two different source streams which may not be
allocated in the same relative positions in memory. But I was unable to create
a test that caused a problem. Using a direct comparison of the content of the
name of the symbol in the "<" operator has problems. Symbols in enclosing or
parallel scopes can have the same name. Also using the location of the symbol
in the cooked character stream has the advantage that it preserves the the
order of the symbols in a structure constructor constant, which makes matching
the values with the symbols relatively easy.
This patch supersedes D97749.
Differential Revision: https://reviews.llvm.org/D97774
It's possible to define a procedure whose interface depends on a procedure
which has an interface that depends on the original procedure. Such a circular
definition was causing the compiler to fall into an infinite loop when
resolving the name of the second procedure. It's also possible to create
circular dependency chains of more than two procedures.
I fixed this by adding the function HasCycle() to the class DeclarationVisitor
and calling it from DeclareProcEntity() to detect procedures with such
circularly defined interfaces. I marked the associated symbols of such
procedures by calling SetError() on them. When processing subsequent
procedures, I called HasError() before attempting to analyze their interfaces.
Unfortunately, this did not work.
With help from Tim, we determined that the SymbolSet used to track the
erroneous symbols was instantiated using a "<" operator which was defined using
the location of the name of the procedure. But the location of the procedure
name was being changed by a call to ReplaceName() between the times that the
calls to SetError() and HasError() were made. This caused HasError() to
incorrectly report that a symbol was not in the set of erroneous symbols.
I fixed this by changing SymbolSet to be an unordered set that uses the
contents of the name of the symbol as the basis for its hash function. This
works because the contents of the name of the symbol is preserved by
ReplaceName() even though its location changes.
I also fixed the error message used when reporting recursively defined
dummy procedure arguments by removing extra apostrophes and sorting the
list of symbols.
I also added tests that will crash the compiler without this change.
Note that the "<" operator is used in other contexts, for example, in the map
of characterized procedures, maps of items in equivalence sets, maps of
structure constructor values, ... All of these situations happen after name
resolution has been completed and all calls to ReplaceName() have already
happened and thus are not subject to the problem I ran into when ReplaceName()
was called when processing procedure entities.
Note also that the implementation of the "<" operator uses the relative
location in the cooked character stream as the basis of its implementation.
This is potentially problematic when symbols from diffent compilation units
(for example symbols originating in .mod files) are put into the same map since
their names will appear in two different source streams which may not be
allocated in the same relative positions in memory. But I was unable to create
a test that caused a problem. Using a direct comparison of the content of the
name of the symbol in the "<" operator has problems. Symbols in enclosing or
parallel scopes can have the same name. Also using the location of the symbol
in the cooked character stream has the advantage that it preserves the the
order of the symbols in a structure constructor constant, which makes matching
the values with the symbols relatively easy.
This patch supersedes D97749.
Differential Revision: https://reviews.llvm.org/D97774
