GS: Add Point Pallete SW Render for 120-en no Haru

Fixes #5211

.clang-format

@@ -0,0 +1,90 @@
+---
+Language:        Cpp
+AccessModifierOffset: -4
+AlignAfterOpenBracket: DontAlign
+AlignConsecutiveAssignments: false
+AlignConsecutiveDeclarations: false
+AlignEscapedNewlines: DontAlign
+AlignOperands:   true
+AlignTrailingComments: false
+AllowAllParametersOfDeclarationOnNextLine: true
+AllowShortBlocksOnASingleLine: false
+AllowShortCaseLabelsOnASingleLine: false
+AllowShortFunctionsOnASingleLine: All
+AllowShortIfStatementsOnASingleLine: Never
+AllowShortLoopsOnASingleLine: false
+AlwaysBreakAfterDefinitionReturnType: None
+AlwaysBreakAfterReturnType: None
+AlwaysBreakBeforeMultilineStrings: false
+AlwaysBreakTemplateDeclarations: true
+BinPackArguments: true
+BinPackParameters: true
+BraceWrapping:
+  AfterCaseLabel:  true
+  AfterClass:      true
+  AfterControlStatement: true
+  AfterEnum:       true
+  AfterFunction:   true
+  AfterNamespace:  true
+  AfterObjCDeclaration: true
+  AfterStruct:     true
+  AfterUnion:      true
+  BeforeCatch:     true
+  BeforeElse:      true
+  IndentBraces:    false
+BreakBeforeBinaryOperators: None
+BreakBeforeBraces: Custom
+BreakBeforeTernaryOperators: false
+BreakConstructorInitializers: BeforeComma
+ColumnLimit:     0
+CommentPragmas:  '^ (IWYU pragma:|NOLINT)'
+ConstructorInitializerAllOnOneLineOrOnePerLine: false
+ConstructorInitializerIndentWidth: 4
+ContinuationIndentWidth: 4
+Cpp11BracedListStyle: true
+DerivePointerAlignment: false
+DisableFormat:   false
+ForEachMacros:   []
+IncludeCategories:
+  - Regex:           '^"(stdafx|PrecompiledHeader)'
+    Priority:        -2
+  - Regex:           '^".*Common'
+    Priority:        -1
+  - Regex:           '^<'
+    Priority:        1
+  - Regex:           '^"'
+    Priority:        2
+IndentCaseLabels: true
+IndentWidth:     4
+IndentWrappedFunctionNames: false
+KeepEmptyLinesAtTheStartOfBlocks: true
+MacroBlockBegin: ''
+MacroBlockEnd:   ''
+MaxEmptyLinesToKeep: 3
+NamespaceIndentation: All
+ObjCBlockIndentWidth: 2
+ObjCSpaceAfterProperty: false
+ObjCSpaceBeforeProtocolList: true
+PenaltyBreakBeforeFirstCallParameter: 19
+PenaltyBreakComment: 300
+PenaltyBreakFirstLessLess: 120
+PenaltyBreakString: 1000
+PenaltyExcessCharacter: 1000000
+PenaltyReturnTypeOnItsOwnLine: 60
+PointerAlignment: Left
+ReflowComments:  false
+SortIncludes:    false
+SpaceAfterCStyleCast: false
+SpaceBeforeAssignmentOperators: true
+SpaceBeforeParens: ControlStatements
+SpaceInEmptyParentheses: false
+SpacesBeforeTrailingComments: 1
+SpacesInAngles:  false
+SpacesInContainerLiterals: true
+SpacesInCStyleCastParentheses: false
+SpacesInParentheses: false
+SpacesInSquareBrackets: false
+Standard:        Cpp11
+TabWidth:        4
+UseTab:          ForContinuationAndIndentation
+...

.codacy.yaml

@@ -0,0 +1,3 @@
+---
+exclude_paths:
+  - '3rdparty/**'

.gitattributes

@@ -0,0 +1,8 @@
+# Set the default behavior, in case people don't have core.autocrlf set.
+* text=auto
+
+# Declare files that will always have CRLF line endings on checkout.
+*.sln text eol=crlf
+*.props text eol=crlf
+*.vcxproj text eol=crlf
+*.vcxproj.filters text eol=crlf

.github/CONTRIBUTING.md

@@ -0,0 +1,52 @@
+# So you want to contribute to PCSX2? Great
+
+As a first step, please review these links as they'll help you understand how the development of PCSX2 works.
+
+*   [Just Starting Out](#just-starting-out)
+*   [Issue Reporting](#issue-reporting)
+*   [Pull Request Guidelines](#pull-request-guidelines)
+*   [General Documentation And Coding Strategies](#general-documentation-and-coding-strategies)
+*   [Tasks](#tasks)
+
+## Just Starting Out
+
+*   If you're unfamilar with git, check out this [brief introduction to Git](https://github.com/PCSX2/pcsx2/wiki/Git-survival-guide)
+*   [How to build PCSX2 for Windows](https://github.com/PCSX2/pcsx2/wiki/Setting-up-the-PCSX2-repository-on-Windows-\(WIP---maybe-more-useful-as-a-manpage-instead%3F\))
+*   [How to build PCSX2 for Linux](https://github.com/PCSX2/pcsx2/wiki/Installing-on-Linux)
+
+## Issue Reporting
+
+*   [How to write a useful issue](https://github.com/PCSX2/pcsx2/wiki/How-to-create-useful-and-valid-issues)
+
+## Pull Request Guidelines
+
+The following is a list of *general* style recommendations that will make reviewing and merging easier:
+
+*   Commit Messages
+    *   Please try to prefix your commit message, indicating what area of the project was modified.
+        *   For example `gs: message...`.
+        *   Looking at the project's commit history will help with keeping prefixes consistent overtime, *there is no strictly enforced list*.
+    *   Try to keep messages brief and informative
+    *   Remove unnecessary commits and squash commits together when appropriate.
+        *   If you are not familiar with rebasing with git, check out the following resources:
+            *   CLI - https://thoughtbot.com/blog/git-interactive-rebase-squash-amend-rewriting-history
+            *   GUI (SourceTree) - https://www.atlassian.com/blog/sourcetree/interactive-rebase-sourcetree
+*   Code Styling and Formatting
+    *   [Consult the style guide](https://github.com/tadanokojin/pcsx2/blob/coding-guide/pcsx2/Docs/Coding_Guidelines.md)
+    *   Run `clang-format` using the configuration file in the root of the repository
+        *   Visual Studio Setup - https://devblogs.microsoft.com/cppblog/clangformat-support-in-visual-studio-2017-15-7-preview-1/
+        *   IMPORTANT - if you are running `clang-format` on unrelated changes (ie. formatting an entire file), please do so in a separate commit.
+            *   If you cannot scope your `clang-format` to just your changes and do not want to format unrelated code.  Try your best to stick with the existing formatting already established in the file in question.
+
+## General Documentation And Coding Strategies
+
+*   [Commenting Etiquette](https://github.com/PCSX2/pcsx2/wiki/Commenting-Etiquette)
+*   [Coding style](https://github.com/PCSX2/pcsx2/wiki/Code-Formatting-Guidelines)
+    *   [More comprehensive style-guide (Currently in Draft)](https://github.com/tadanokojin/pcsx2/blob/coding-guide/pcsx2/Docs/Coding_Guidelines.md)
+*   [wxWidgets coding strategies](https://github.com/PCSX2/pcsx2/wiki/wxWidgets-Coding-Strategies)
+
+## Tasks
+
+*   [Todo List](https://github.com/PCSX2/pcsx2/wiki/Contributing-\(TODO-List\))
+*   [Issues](https://github.com/PCSX2/pcsx2/issues)
+*   [A collection of ideas to improve GS OGL](https://github.com/PCSX2/pcsx2/wiki/Todo-List)

.github/ISSUE_TEMPLATE/app_bug_report.yaml

@@ -0,0 +1,81 @@
+# Docs - https://docs.github.com/en/communities/using-templates-to-encourage-useful-issues-and-pull-requests/syntax-for-githubs-form-schema
+name: Application Bug Report
+description: Found a problem with the application itself (ie. bad file path handling, UX issue)? Help us improve it.
+title: "[BUG]: "
+labels: [Bug]
+# assignees:
+#   - octocat
+body:
+  - type: markdown
+    attributes:
+      value: |
+        ## Important: Read First
+
+        Please do not make support requests on GitHub. Our issue tracker is for tracking bugs and feature requests only
+        If you need help configuring the emulator please make a request on our forums or contact us on discord
+
+        If you are unsure, start with [discord](https://discord.com/invite/TCz3t9k) or the [forums](https://forums.pcsx2.net/index.php)
+
+        Please make an effort to make sure your issue isn't already reported
+
+        ### Please Avoid Issues Pertaining to the Following:
+        - We are **not** accepting bug reports for **PSX mode** at this time
+          - If you are interested in helping contribute to PSX mode please do so on the forums. Otherwise our recommendation is that you use a [proper PSX emulator](https://emulation.gametechwiki.com/index.php/PlayStation_emulators)
+        - We do **not** accept issues relating to **upscaling** at this time
+          - We are aware of the various problems with upscaling. The issue spans many games and having hundreds of issues for the same fundamental issues isn't particularly helpful. There are several workarounds for graphical problems that come as a result of upscaling
+          - Please try your game at native resolution before creating an issue
+          - If your bug is the result of upscaling please use the forums or discord for assistance with various upscaling workarounds. Additionally, the unofficial PCSX2 [Wiki](https://wiki.pcsx2.net/Main_Page) often lists various fixes for upscaling issues
+  - type: textarea
+    id: desc
+    attributes:
+      label: Describe the Bug
+      description: "A clear and concise description of what the bug is"
+    validations:
+      required: true
+  - type: textarea
+    id: repro
+    attributes:
+      label: Reproduction Steps
+      description: "Steps to reproduce the behavior"
+    validations:
+      required: true
+  - type: textarea
+    id: expect
+    attributes:
+      label: Expected Behavior
+      description: "A clear and concise description of what you expected to happen"
+    validations:
+      required: false
+  - type: input
+    id: rev
+    attributes:
+      label: PCSX2 Revision
+      description: "Please ensure you are on the latest version before making an issue"
+      placeholder: "Example: v1.7.1337"
+    validations:
+      required: true
+  - type: dropdown
+    id: os
+    attributes:
+      label: Operating System
+      options:
+      - Windows 11
+      - Windows 10 (32bit)
+      - Windows 10 (64bit)
+      - Windows 8.1 (32bit)
+      - Windows 8.1 (64bit)
+      - Linux (32bit) - Specify Distro Below
+      - Linux (64bit) - Specify Distro Below
+      - macOS (Monteray)
+      - macOS (BigSur)
+      - macOS (Catalina)
+      - macOS (Mojave)
+    validations:
+      required: true
+  - type: input
+    id: os-distro
+    attributes:
+      label: If Linux - Specify Distro
+      placeholder: "Example: Arch"
+    validations:
+      required: false

.github/ISSUE_TEMPLATE/config.yml

@@ -0,0 +1,11 @@
+blank_issues_enabled: false
+contact_links:
+  - name: Support Forums
+    url: https://forums.pcsx2.net/index.php
+    about: For community support and answers
+  - name: Discord
+    url: https://discord.com/invite/TCz3t9k
+    about: Get direct support and hang out with us
+  - name: Wiki
+    url: https://wiki.pcsx2.net/Main_Page
+    about: For user provided information and reports

.github/ISSUE_TEMPLATE/emu_bug_report.yaml

@@ -0,0 +1,149 @@
+# Docs - https://docs.github.com/en/communities/using-templates-to-encourage-useful-issues-and-pull-requests/syntax-for-githubs-form-schema
+name: Emulation Bug Report
+description: Problem in a game (ie. graphical artifacts, crashes)? Help us improve it.
+title: "[BUG]: "
+labels: [Bug]
+# assignees:
+#   - octocat
+body:
+  - type: markdown
+    attributes:
+      value: |
+        ## Important: Read First
+
+        Please do not make support requests on GitHub. Our issue tracker is for tracking bugs and feature requests only
+        If you need help configuring the emulator please make a request on our forums or contact us on discord
+
+        If you are unsure, start with [discord](https://discord.com/invite/TCz3t9k) or the [forums](https://forums.pcsx2.net/index.php)
+
+        Please make an effort to make sure your issue isn't already reported
+
+        ### Please Avoid Issues Pertaining to the Following:
+        - We are **not** accepting bug reports for **PSX mode** at this time
+          - If you are interested in helping contribute to PSX mode please do so on the forums. Otherwise our recommendation is that you use a [proper PSX emulator](https://emulation.gametechwiki.com/index.php/PlayStation_emulators)
+        - We do **not** accept issues relating to **upscaling** at this time
+          - We are aware of the various problems with upscaling. The issue spans many games and having hundreds of issues for the same fundamental issues isn't particularly helpful. There are several workarounds for graphical problems that come as a result of upscaling
+          - Please try your game at native resolution before creating an issue
+          - If your bug is the result of upscaling please use the forums or discord for assistance with various upscaling workarounds. Additionally, the unofficial PCSX2 [Wiki](https://wiki.pcsx2.net/Main_Page) often lists various fixes for upscaling issues
+  - type: textarea
+    id: desc
+    attributes:
+      label: Describe the Bug
+      description: "A clear and concise description of what the bug is"
+    validations:
+      required: true
+  - type: textarea
+    id: repro
+    attributes:
+      label: Reproduction Steps
+      description: "Steps to reproduce the behavior"
+    validations:
+      required: true
+  - type: textarea
+    id: expect
+    attributes:
+      label: Expected Behavior
+      description: "A clear and concise description of what you expected to happen"
+    validations:
+      required: false
+  - type: markdown
+    attributes:
+      value: |
+        ## System Info
+
+        Please make sure your system meets our requirements for OS version, CPU and GPU
+        - [System Requirements](https://github.com/PCSX2/pcsx2#system-requirements)
+
+        We **do not** accept bug reports for **unsupported operating systems**.
+        - [For macOS Support](https://forums.pcsx2.net/Thread-Native-Mac-Testing-Build)
+
+        Performance issues as a result of not meeting our hardware requirements are not valid
+
+        Please read our known issues pages for AMD and Intel drivers.
+        - [Intel Drivers](https://github.com/PCSX2/pcsx2/wiki/OpenGL-and-Intel-GPUs-All-you-need-to-know)
+        - [AMD Drivers](https://github.com/PCSX2/pcsx2/wiki/OpenGL-and-AMD-GPUs---All-you-need-to-know)
+
+        We are **not** accepting issues related to the **libretro** core. The libretro core is being maintained separately at this time
+  - type: input
+    id: rev
+    attributes:
+      label: PCSX2 Revision
+      description: "We only accept bug reports for the latest dev version. Please try upgrading before making an issue."
+      placeholder: "Example: v1.7.1337"
+    validations:
+      required: true
+  - type: dropdown
+    id: os
+    attributes:
+      label: Operating System
+      options:
+      - Windows 11
+      - Windows 10 (32bit)
+      - Windows 10 (64bit)
+      - Windows 8.1 (32bit)
+      - Windows 8.1 (64bit)
+      - Linux (32bit) - Specify Distro Below
+      - Linux (64bit) - Specify Distro Below
+      - macOS (Monteray)
+      - macOS (BigSur)
+      - macOS (Catalina)
+      - macOS (Mojave)
+    validations:
+      required: true
+  - type: input
+    id: os-distro
+    attributes:
+      label: If Linux - Specify Distro
+      placeholder: "Example: Arch"
+    validations:
+      required: false
+  - type: input
+    id: cpu
+    attributes:
+      label: CPU
+      placeholder: "Example: i5-7600"
+    validations:
+      required: true
+  - type: input
+    id: gpu
+    attributes:
+      label: GPU
+      placeholder: "Example: GTX 1070"
+    validations:
+      required: true
+  - type: textarea
+    id: gsSettings
+    attributes:
+      label: GS Settings
+      description: "Any **non-default** settings for GS. If you don't want to list them out, please provide screenshots of your configuration window (including hw hacks if enabled)."
+    validations:
+      required: false
+  - type: textarea
+    id: emuSettings
+    attributes:
+      label: Emulation Settings
+      description: |
+        Any non-default core settings. If you don't want to list them out, please provide screenshots of your configuration window
+
+        Please note that the safe preset works for most games. MTVU can have some compatibility issues so please disable it before making a report
+
+        If you need to modify the settings manually because a game requires you to do so to work, please state that explicitly
+    validations:
+      required: false
+  - type: textarea
+    id: gsScreens
+    attributes:
+      label: GS Window Screenshots
+      description: "If your issue is graphical in nature and you think screenshots will help illustrate your issue, you may do that here."
+    validations:
+      required: false
+  - type: textarea
+    id: logsDumps
+    attributes:
+      label: "Logs & Dumps"
+      description: |
+        Please feel free to attach any logs, block dumps, GSdump, etc here
+
+        If your problem is graphical in nature it is highly recommended that you provide a GSdump. [GSdump Guide](https://forums.pcsx2.net/Thread-How-to-create-a-proper-GS-dump)
+    validations:
+      required: false

.github/ISSUE_TEMPLATE/feature_request.yaml

@@ -0,0 +1,41 @@
+# Docs - https://docs.github.com/en/communities/using-templates-to-encourage-useful-issues-and-pull-requests/syntax-for-githubs-form-schema
+name: Feature request
+description: Suggest a new feature or improve an existing one
+title: "[Feature Request]: "
+labels: ["Enhancement / Feature Request"]
+# assignees:
+#   - octocat
+body:
+  - type: textarea
+    id: desc
+    attributes:
+      label: Description
+      description: |
+        A concise description of the feature you want
+
+        Include step by step examples of how the feature should work under various circumstances
+    validations:
+      required: true
+  - type: textarea
+    id: reason
+    attributes:
+      label: Reason
+      description: |
+        Give a reason why you want this feature
+        - How will it make things easier for you?
+        - How does this feature help your enjoyment of the emulator?
+        - What does it provide that isn't being provided currently?
+
+        We are not accepting feature requests related to the libretro core as it's being maintained separately at this time
+    validations:
+      required: true
+  - type: textarea
+    id: examples
+    attributes:
+      label: Examples
+      description: |
+        Provide examples of the feature as implemented by other software
+
+        Include screenshots or video if you like to help demonstrate how you'd like this feature to work
+    validations:
+      required: true

.github/PULL_REQUEST_TEMPLATE.md

@@ -0,0 +1,8 @@
+### Description of Changes
+<!-- Brief description or overview on what was changed in the PR -->
+
+### Rationale behind Changes
+<!-- Why were these changes made?  What problem does it solve / area does it improve? -->
+
+### Suggested Testing Steps
+<!-- If applicable, including examples you've already tested with / recommendations for how to test further is very helpful! -->

.github/dependabot.yml

@@ -0,0 +1,8 @@
+# Set update schedule for GitHub Actions
+version: 2
+updates:
+  - package-ecosystem: "github-actions"
+    directory: "/"
+    schedule:
+      # Check for updates to GitHub Actions every week
+      interval: "weekly"

.github/labeler.yml

@@ -0,0 +1,111 @@
+# Documentation - https://github.com/actions/labeler
+
+# General Labels
+'Build | Project System':
+  - '.github/*'
+  - '.github/**/*'
+  - '*.sln'
+  - '**/*.sln'
+  - '*.vcxproj*'
+  - '**/*.vcxproj*'
+  - 'cmake/*'
+  - 'cmake/**/*'
+  - 'CMakeLists.txt'
+  - '**/CMakeLists.txt'
+  - 'buildbot.xml'
+  - 'build.sh'
+'Dependencies':
+  - '3rdparty/*'
+  - '3rdparty/**/*'
+  - '**/3rdpartyDeps.props'
+  - '.gitmodules'
+'Documentation':
+  - '*.md'
+  - '**/*.md'
+  - '*.pdf'
+  - '**/*.pdf'
+'GUI/WX':
+  - 'pcsx2/gui/*'
+  - 'pcsx2/gui/**/*'
+'GameDB':
+  - '**/GameIndex.*'
+'Installer | Package':
+  - 'nsis/*'
+  - 'nsis/**/*'
+  - 'build.sh'
+
+# Tools / Features
+'Debugger':
+  - 'pcsx2/DebugTools/*'
+  - 'pcsx2/DebugTools/**/*'
+  - 'pcsx2/gui/Debugger/*'
+  - 'pcsx2/gui/Debugger/**/*'
+'IPC':
+  - 'pcsx2/IPC*'
+  - 'pcsx2/**/IPC*'
+'TAS Functionality':
+  - 'pcsx2/Recording/*'
+  - 'pcsx2/Recording/**/*'
+
+# Emulation Components
+'Counters':
+  - 'pcsx2/Counters.*'
+'Vector Units':
+  - 'pcsx2/VU*'
+  - 'pcsx2/**/VU*'
+  - 'pcsx2/*VU*'
+  - 'pcsx2/**/*VU*'
+'VIF':
+  - 'pcsx2/Vif*'
+  - 'pcsx2/**/Vif*'
+  - 'pcsx2/VIF*'
+  - 'pcsx2/**/VIF*'
+
+# GS Related Labels
+'GS':
+  - 'pcsx2/GS/*'
+  - 'pcsx2/GS/**/*'
+'GS: Direct3D':
+  - 'pcsx2/GS/Renderers/DX11/*'
+  - 'pcsx2/GS/Renderers/DX11/**/*'
+'GS: Hardware':
+  - 'pcsx2/GS/Renderers/HW/*'
+  - 'pcsx2/GS/Renderers/HW/**/*'
+'GS: OpenGL':
+  - 'pcsx2/GS/Renderers/OpenGL/*'
+  - 'pcsx2/GS/Renderers/OpenGL/**/*'
+'GS: Vulkan':
+  - 'pcsx2/GS/Renderers/Vulkan/*'
+  - 'pcsx2/GS/Renderers/Vulkan/**/*'
+'GS: Texture Cache':
+  - 'pcsx2/GS/Renderers/*TextureCache*.*'
+  - 'pcsx2/GS/Renderers/**/*TextureCache*.*'
+'GS: Software':
+  - 'pcsx2/GS/Renderers/SW/*'
+  - 'pcsx2/GS/Renderers/SW/**/*'
+
+# Other Core Components
+'CDVD':
+  - 'pcsx2/CDVD/*'
+  - 'pcsx2/CDVD/**/*'
+'DEV9':
+  - 'pcsx2/DEV9/*'
+  - 'pcsx2/DEV9/**/*'
+'IPU':
+  - 'pcsx2/IPU/*'
+  - 'pcsx2/IPU/**/*'
+'Memory Card':
+  - 'pcsx2/gui/MemoryCard*'
+  - 'pcsx2/gui/**/MemoryCard*'
+'PAD: Linux/Mac':
+  - 'pcsx2/PAD/Linux/*'
+  - 'pcsx2/PAD/Linux/**/*'
+'PAD: Windows':
+  - 'pcsx2/PAD/Windows/*'
+  - 'pcsx2/PAD/Windows/**/*'
+'SPU2':
+  - 'pcsx2/SPU2/*'
+  - 'pcsx2/SPU2/**/*'
+'USB':
+  - 'pcsx2/USB/*'
+  - 'pcsx2/USB/**/*'

.github/workflows/architecture/release-process.puml

@@ -0,0 +1,47 @@
+@startuml
+participant User as user
+participant Github as github
+participant "Create Release WF" as create
+participant "Build WFs" as build
+participant "Finalize Release WF" as finalize
+participant Discord as discord
+
+==Nightly Release==
+
+user -> github : New Commit on master (from PR, or directly)
+...waiting for commit push event to fire...
+github -> create : Push a new git tag, patch incrementing latest Version
+alt from-pr? case
+    create -> create : Use links to the PR as a description
+else was a commit
+    create -> create : Use Commit Message as Description
+end
+create -> create : Generate release notes
+create -> github : Create new draft release, associated with tag and with the notes
+note right
+Draft releases are not public facing, only those with write access can see them!
+end note
+...waiting for push tag event to fire...
+loop for all build workflows
+github -> build : Build the tag commit
+build -> build : .exe will use the git tag for it's title and such
+build -> build : Upload the generated artifact to the associated release
+alt all-artifacts-uploaded? case
+  build -> github : Publish the release
+  user -> github : Can now download the artifacts on the published release
+end
+note right 
+This is the only area where an eventual consistency issue is apparent
+It is because GitHub does not fire events for when draft releases are edited
+This is glossed over in the initial impl and can be improved and be made eventually consistent as well
+end note
+
+
+...waiting for release publish event to fire...
+github -> finalize : Announce the Release
+finalize -> github : Gather all asset links, and format message embed.
+finalize -> discord : Announce new build via a WebHook
+
+...waiting for announcement...
+user -> discord : Can download artifacts from links via the discord
+@enduml

.github/workflows/lint-gamedb.yml

@@ -0,0 +1,27 @@
+name: 📝 Validate GameDB
+
+on:
+  push:
+    branches:
+      - master
+    paths:
+      - '**/GameIndex.yaml'
+  pull_request:
+    branches:
+      - master
+    paths:
+      - '**/GameIndex.yaml'
+
+jobs:
+  lint:
+    runs-on: ubuntu-latest
+    steps:
+      - name: Checkout Repository
+        uses: actions/checkout@v2
+
+      - name: Validate GameDB
+        env:
+          SCRIPT_DIR: .github/workflows/scripts/validation/lint-gamedb
+        run: |
+          pip install -r "${SCRIPT_DIR}/requirements.txt"
+          python "${SCRIPT_DIR}/lint-gamedb.py"

.github/workflows/linux-workflow.yml

@@ -0,0 +1,239 @@
+name: 🐧 Linux Builds
+
+# Controls when the action will run. Triggers the workflow on push or pull request
+# events but only for the master branch
+on:
+  push:
+    branches:
+      - master
+    tags:
+      - v*
+  pull_request:
+    branches:
+      - master
+    paths-ignore:
+      - "**/*.md"
+      - "**/*.bat"
+      - "**/*.cmd"
+      - "**/*.props"
+      - "**/*.sln"
+      - ".clang-format"
+      - ".codacy.yaml"
+      - ".github/*"
+      - ".github/workflows/lint-gamedb.yml"
+      - ".github/workflows/macos-workflow.yml"
+      - ".github/workflows/pr-triage.yml"
+      - ".github/workflows/scripts/windows/**"
+      - ".github/workflows/scripts/validation/**"
+      - ".github/workflows/windows-workflow.yml"
+      - ".gitignore"
+      - "bin/PCSX2_keys.ini.default"
+      - "build.sh"
+      - "buildbot.xml"
+      - "pcsx2/CDVD/Windows/**"
+      - "pcsx2/DEV9/Win32/**"
+      - "pcsx2/PAD/Windows/**"
+      - "pcsx2/SPU2/Windows/**"
+      - "pcsx2/USB/Win32/**"
+      - "pcsx2/windows/**"
+
+jobs:
+  build:
+    strategy:
+      # Prevent one build from failing everything (although maybe those should be included as experimental builds instead)
+      fail-fast: false
+      matrix:
+        include:
+          - os: ubuntu-18.04
+            platform: x86
+            compiler: gcc
+            cmakeflags: -DLTO_PCSX2_CORE=ON
+            appimage: true
+            experimental: false
+          - os: ubuntu-18.04
+            platform: x64
+            compiler: gcc
+            cmakeflags: -DLTO_PCSX2_CORE=ON
+            appimage: true
+            experimental: false
+          - os: ubuntu-18.04
+            platform: x86
+            compiler: clang
+            # Need to disable PCH until cmake 3.17
+            # (PCH conflicts with ccache, fixed by https://gitlab.kitware.com/cmake/cmake/-/merge_requests/4400)
+            cmakeflags: -DCMAKE_DISABLE_PRECOMPILE_HEADERS=ON
+            detail: " nopch"
+            appimage: false
+            experimental: false
+          - os: ubuntu-18.04
+            platform: x86
+            compiler: gcc
+            cmakeflags: -DCMAKE_DISABLE_PRECOMPILE_HEADERS=ON
+            detail: " nopch"
+            appimage: false
+            experimental: false
+          - os: ubuntu-18.04
+            platform: x86
+            compiler: gcc
+            cmakeflags: -DCMAKE_DISABLE_PRECOMPILE_HEADERS=ON -DARCH_FLAG=-march=haswell
+            detail: " avx2 nopch"
+            appimage: false
+            experimental: false
+
+    name: ${{ matrix.platform }} | ${{ matrix.compiler }}${{ matrix.detail }}
+    runs-on: ${{ matrix.os }}
+    continue-on-error: ${{ matrix.experimental }}
+    # Set some sort of timeout in the event of run-away builds.  We are limited on concurrent jobs so, get rid of them.
+    timeout-minutes: 60
+
+    env:
+      CCACHE_BASEDIR: ${{ github.workspace }}
+      CCACHE_DIR: ${{ github.workspace }}/.ccache
+      CCACHE_COMPRESS: true
+      CCACHE_COMPRESSLEVEL: 9
+      CCACHE_MAXSIZE: 100M
+      SDL: SDL2-2.0.16
+      PATCHELF_VERSION: 0.12
+
+    steps:
+      # NOTE - useful for debugging
+      # - name: Dump GitHub context
+      #   env:
+      #     GITHUB_CONTEXT: ${{ toJson(github) }}
+      #   run: |
+      #     echo "$GITHUB_CONTEXT"
+      #     echo ${{ github.event.pull_request.title }}
+
+      - name: Checkout Repository
+        uses: actions/checkout@v2
+
+      - name: Checkout Submodules
+        if: steps.cache-submodules.outputs.cache-hit != 'true'
+        run: git submodule update --init --recursive -j $(getconf _NPROCESSORS_ONLN)
+
+      # -- SETUP CCACHE - https://cristianadam.eu/20200113/speeding-up-c-plus-plus-github-actions-using-ccache/
+      - name: Prepare ccache timestamp
+        id: ccache_cache_timestamp
+        shell: cmake -P {0}
+        run: |
+          string(TIMESTAMP current_date "%Y-%m-%d-%H;%M;%S" UTC)
+          message("::set-output name=timestamp::${current_date}")
+
+      - name: ccache cache files
+        uses: actions/cache@v2.1.7
+        with:
+          path: .ccache
+          key: ${{ matrix.os }} ${{ matrix.platform }} ${{ matrix.compiler }}${{ matrix.detail }} ccache ${{ steps.ccache_cache_timestamp.outputs.timestamp }}
+          restore-keys: ${{ matrix.os }} ${{ matrix.platform }} ${{ matrix.compiler }}${{ matrix.detail }} ccache
+
+      - name: Prepare Artifact Metadata
+        id: artifact-metadata
+        shell: bash
+        run: |
+          ARCH=$([ "${{ matrix.platform }}" == x86 ] && echo "32bit" || echo "64bit")
+          ARTIFACT_NAME=""
+          if [ ${{ github.event_name }} == "pull_request" ]; then
+            PR_SHA=$(git rev-parse --short "${{ github.event.pull_request.head.sha }}")
+            ARTIFACT_NAME="PCSX2-${ARCH}"
+            if [ ! -z "${{ github.event.pull_request.number }}" ]; then
+              PR_NUM=${{ github.event.pull_request.number }}
+              ARTIFACT_NAME="${ARTIFACT_NAME}-pr[${PR_NUM}]"
+            fi
+            ARTIFACT_NAME="${ARTIFACT_NAME}-sha[${PR_SHA}]"
+            if [ ! -z "${{ github.event.pull_request.title }}" ]; then
+              PR_TITLE=$(echo "${{ github.event.pull_request.title }}" | tr -cd '[a-zA-Z0-9[:space:]]_-')
+              ARTIFACT_NAME="${ARTIFACT_NAME}-title["${PR_TITLE}""
+            fi
+          else
+            SHA=$(git rev-parse --short "$GITHUB_SHA")
+            ARTIFACT_NAME="PCSX2-${ARCH}-sha[${SHA}"
+          fi
+          TRIMMED_ARTIFACT_NAME=$(printf "%.199s]" "$ARTIFACT_NAME")
+          echo "name=$TRIMMED_ARTIFACT_NAME"
+          echo "##[set-output name=name;]${TRIMMED_ARTIFACT_NAME}"
+          echo "##[set-output name=arch;]${ARCH}"
+
+      - name: Install Packages
+        env:
+          PLATFORM: ${{ matrix.platform }}
+          COMPILER: ${{ matrix.compiler }}
+        run: .github/workflows/scripts/linux/install-packages.sh
+
+      - name: Cache Dependencies
+        uses: actions/cache@v2.1.7
+        with:
+          path: |
+            3rdparty/${{ env.SDL }}
+            3rdparty/patchelf-${{ env.PATCHELF_VERSION }}
+          key: ${{ matrix.os }} ${{ matrix.platform }} ${{ env.SDL }} patchelf-${{ env.PATCHELF_VERSION }}
+
+      - name: Build Dependencies
+        run: |
+          if [[ ! -e 3rdparty/patchelf-${{ env.PATCHELF_VERSION }} ]]; then
+            curl -sSfL https://github.com/NixOS/patchelf/releases/download/${{ env.PATCHELF_VERSION }}/patchelf-${{ env.PATCHELF_VERSION }}.tar.bz2 | tar -xjC 3rdparty
+            mv 3rdparty/patchelf-${{ env.PATCHELF_VERSION }}* 3rdparty/patchelf-${{ env.PATCHELF_VERSION }}
+            cd 3rdparty/patchelf-${{ env.PATCHELF_VERSION }}
+            ./configure
+            make && cd ../../
+          fi
+          sudo make -C 3rdparty/patchelf-${{ env.PATCHELF_VERSION }} install
+          if [[ ! -e 3rdparty/${{ env.SDL }} ]]; then
+            curl -sL https://libsdl.org/release/${{ env.SDL }}.tar.gz | tar -xzC 3rdparty
+            cd 3rdparty/${{ env.SDL }}
+            if [ "${{ matrix.platform }}" == "x86" ]; then
+              ./configure --build=i686-pc-linux-gnu CC=${{ matrix.compiler }} CFLAGS=-m32 CXXFLAGS=-m32 LDFLAGS=-m32 --prefix=/usr --libdir=/usr/lib/i386-linux-gnu
+            else
+              ./configure --prefix=/usr --libdir=/usr/lib/x86_64-linux-gnu
+            fi
+            make -j $(getconf _NPROCESSORS_ONLN) && cd ../../
+          fi
+          sudo make -C 3rdparty/${{ env.SDL }} install
+
+      - name: Generate CMake
+        env:
+          PLATFORM: ${{ matrix.platform }}
+          COMPILER: ${{ matrix.compiler }}
+          ADDITIONAL_CMAKE_ARGS: ${{ matrix.cmakeflags }}
+        run: .github/workflows/scripts/linux/generate-cmake.sh
+
+      - name: Build PCSX2
+        working-directory: build
+        run: ../.github/workflows/scripts/linux/compile.sh
+
+      - name: Run Tests
+        working-directory: ./build
+        run: ninja unittests
+
+      - name: Package AppImage
+        if: matrix.appimage == true
+        env:
+          PLATFORM: ${{ matrix.platform }}
+          COMPILER: ${{ matrix.compiler }}
+          name: ${{ steps.artifact-metadata.outputs.name }}
+        run: .github/workflows/scripts/linux/appimage.sh
+
+      - name: Upload artifact
+        if: matrix.appimage == true
+        uses: actions/upload-artifact@v2
+        with:
+          name: ${{ steps.artifact-metadata.outputs.name }}
+          path: ci-artifacts
+
+      # ---- Release / Tagging related steps ----
+      - name: Prepare Build Artifacts
+        if: github.repository == 'PCSX2/pcsx2' && startsWith(github.ref, 'refs/tags/') && matrix.appimage == true
+        run: |
+          mv ./ci-artifacts/*.AppImage ./ci-artifacts/linux-AppImage-${{ steps.artifact-metadata.outputs.arch }}.AppImage
+          ls ./ci-artifacts/
+
+      - name: Upload Assets and Potential Publish Release
+        if: github.repository == 'PCSX2/pcsx2' && startsWith(github.ref, 'refs/tags/') && matrix.appimage == true
+        env:
+          GITHUB_TOKEN: ${{ secrets.BOT_PAT }}
+          ASSET_DIR: ${{ github.WORKSPACE }}/ci-artifacts
+          ASSET_EXTENSION: AppImage
+          TAG_TO_SEARCH_FOR: ${{ github.REF }}
+        run: |
+          cd ./.github/workflows/scripts/releases/upload-release-artifacts
+          npm ci
+          node index.js

.github/workflows/macos-workflow.yml

@@ -0,0 +1,118 @@
+name: 🍎 MacOS Builds
+
+# Controls when the action will run. Triggers the workflow on push or pull request
+# events but only for the master branch
+on:
+  push:
+    branches:
+      - master
+    paths-ignore:
+      - '**/*.md'
+      - '**/*.bat'
+      - '**/*.cmd'
+      - '**/*.props'
+      - '**/*.sln'
+      - '.clang-format'
+      - '.codacy.yaml'
+      - '.github/*'
+      - '.github/workflows/lint-gamedb.yml'
+      - '.github/workflows/linux-workflow.yml'
+      - '.github/workflows/pr-triage.yml'
+      - '.github/workflows/scripts/windows/**'
+      - '.github/workflows/scripts/validation/**'
+      - '.github/workflows/windows-workflow.yml'
+      - '.gitignore'
+      - 'bin/PCSX2_keys.ini.default'
+      - 'build.sh'
+      - 'buildbot.xml'
+      - 'pcsx2/CDVD/Windows/**'
+      - 'pcsx2/DEV9/Win32/**'
+      - 'pcsx2/PAD/Windows/**'
+      - 'pcsx2/SPU2/Windows/**'
+      - 'pcsx2/USB/Win32/**'
+      - 'pcsx2/windows/**'
+  pull_request:
+    branches:
+      - master
+    paths-ignore:
+      - '**/*.md'
+      - '**/*.bat'
+      - '**/*.cmd'
+      - '**/*.props'
+      - '**/*.sln'
+      - '.clang-format'
+      - '.codacy.yaml'
+      - '.github/*'
+      - '.github/workflows/lint-gamedb.yml'
+      - '.github/workflows/linux-workflow.yml'
+      - '.github/workflows/pr-triage.yml'
+      - '.github/workflows/scripts/windows/**'
+      - '.github/workflows/scripts/validation/**'
+      - '.github/workflows/windows-workflow.yml'
+      - '.gitignore'
+      - 'bin/PCSX2_keys.ini.default'
+      - 'build.sh'
+      - 'buildbot.xml'
+      - 'pcsx2/CDVD/Windows/**'
+      - 'pcsx2/DEV9/Win32/**'
+      - 'pcsx2/PAD/Windows/**'
+      - 'pcsx2/SPU2/Windows/**'
+      - 'pcsx2/USB/Win32/**'
+      - 'pcsx2/windows/**'
+
+jobs:
+  build:
+    strategy:
+      # Prevent one build from failing everything (although maybe those should be included as experimental builds instead)
+      fail-fast: false
+      matrix:
+        os: [macos-11.0]
+        platform: [x64]
+        experimental: [false]
+
+    name: ${{ matrix.platform }}
+    runs-on: ${{ matrix.os }}
+    continue-on-error: ${{ matrix.experimental }}
+    # Set some sort of timeout in the event of run-away builds.  We are limited on concurrent jobs so, get rid of them.
+    timeout-minutes: 30
+
+    steps:
+      # NOTE - useful for debugging
+      # - name: Dump GitHub context
+      #   env:
+      #     GITHUB_CONTEXT: ${{ toJson(github) }}
+      #   run: |
+      #     echo "$GITHUB_CONTEXT"
+      #     echo ${{ github.event.pull_request.title }}
+
+      - name: Checkout Repository
+        uses: actions/checkout@v2
+
+      - name: Checkout Submodules
+        run: git submodule update --init --recursive -j $(getconf _NPROCESSORS_ONLN)
+
+      - name: Install Packages
+        env:
+          PLATFORM: ${{ matrix.platform }}
+          HOMEBREW_NO_INSTALL_CLEANUP: 1
+          HOMEBREW_NO_ANALYTICS: 1
+        run: |
+          # To save time, only brew update if running the install without it fails
+          function do-install() {
+            brew install sound-touch portaudio wxwidgets sdl2 libsamplerate
+          }
+          if ! do-install; then
+            brew update
+            do-install
+          fi
+
+      - name: Generate CMake Files
+        run: cmake -DCMAKE_BUILD_TYPE=Release -DCMAKE_BUILD_PO=FALSE -DLTO_PCSX2_CORE=ON -B build .
+
+      - name: Build PCSX2
+        working-directory: build
+        run: make -j$(getconf _NPROCESSORS_ONLN) # macOS doesn't use make install
+
+      - name: Run Tests
+        working-directory: build
+        run: make -j$(getconf _NPROCESSORS_ONLN) unittests

.github/workflows/pr-triage.yml

@@ -0,0 +1,27 @@
+# Runs steps to triage an incoming Pull Request, for example - applying labels.
+name: 🤔 Pull Request Triage
+
+on: pull_request_target
+
+jobs:
+  triage:
+    if: github.repository == 'PCSX2/pcsx2'
+    runs-on: ubuntu-latest
+    steps:
+    - uses: actions/labeler@main
+      with:
+        repo-token: ${{ secrets.GITHUB_TOKEN }}
+
+    - uses: xTVaser/first-interaction@v1.2.4
+      with:
+        repo-token: ${{ secrets.GITHUB_TOKEN }}
+        debug-mode: false
+        pr-message: |-
+          ## Thank you for submitting a contribution to PCSX2
+
+          As this is your first pull request, [please be aware of the contributing guidelines](https://github.com/PCSX2/pcsx2/blob/master/.github/CONTRIBUTING.md).
+
+          Additionally, as per recent changes in GitHub Actions, your pull request will need to be approved by a maintainer before GitHub Actions can run against it. [You can find more information about this change here.](https://github.blog/2021-04-22-github-actions-update-helping-maintainers-combat-bad-actors/)
+
+          Please be patient until this happens. In the meantime if you'd like to confirm the builds are passing, you have the option of opening a PR on your own fork, just make sure your fork's master branch is up to date!
+        pr-labels: "First Time Contribution"

.github/workflows/release-announce.yml

@@ -0,0 +1,24 @@
+name: 📢 Announce Release
+
+on:
+  release:
+    types: [published]
+
+jobs:
+  announce:
+    if: github.repository == 'PCSX2/pcsx2'
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v2
+
+      - uses: actions/setup-node@v2
+        with:
+          node-version: 16
+
+      - name: Announce Release
+        env:
+          DISCORD_BUILD_WEBHOOK: ${{ secrets.DISCORD_BUILD_WEBHOOK }}
+        run: |
+          cd ./.github/workflows/scripts/releases/announce-release
+          npm ci
+          node index.js

.github/workflows/release-push-tag-and-draft.yml

@@ -0,0 +1,62 @@
+# Whenever a commit is pushed to master (ideally via a pull-request!)
+# this action will create the next release, which means:
+# 1. tag master with the proper version
+# 2. create a new draft release (pre-released if a nightly build)
+# 3. add release notes
+
+name: 🏭 Create Release
+
+on:
+  push:
+    branches:
+      - master
+  # TODO - future work
+  # workflow_dispatch:
+  #   inputs:
+  #     isStable:
+  #       description: 'Should it be a stable release?'
+  #       required: true
+  #       default: 'false'
+  #     versionTag:
+  #       description: 'The version to tag with'
+  #       required: true
+
+jobs:
+  cut-release:
+    if: github.repository == 'PCSX2/pcsx2'
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v2
+
+      # Docs - https://github.com/mathieudutour/github-tag-action
+      # Workflows cannot trigger other workflows implicitly
+      # - https://github.community/t/github-actions-workflow-not-triggering-with-tag-push/17053/7
+      - name: Bump Version and Push Tag
+        id: tag_version
+        uses: mathieudutour/github-tag-action@v6.0
+        with:
+          github_token: ${{ secrets.BOT_PAT }}
+          tag_prefix: v
+          default_bump: patch
+
+      # Generate the Release Notes
+      - name: Generate Release Notes
+        env:
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+          COMMIT_SHA: ${{ github.SHA }}
+        run: |
+          cd ./.github/workflows/scripts/releases/generate-release-notes
+          npm ci
+          node index.js
+          mv ./release-notes.md ${GITHUB_WORKSPACE}/release-notes.md
+          ls
+
+      # Docs - https://github.com/softprops/action-gh-release
+      - name: Create a GitHub Release
+        uses: softprops/action-gh-release@v1
+        if: steps.tag_version.outputs.new_tag
+        with:
+          body_path: ./release-notes.md
+          draft: true
+          prerelease: true
+          tag_name: ${{ steps.tag_version.outputs.new_tag }}

.github/workflows/scripts/controller-db/.gitignore

@@ -0,0 +1 @@
+*.txt

.github/workflows/scripts/controller-db/update-db.py

@@ -0,0 +1,38 @@
+import os
+
+relevant_categories = [
+  "# Mac OS X",
+  "# Linux"
+]
+
+header_lines = []
+new_db_contents = []
+
+def is_relevant_category(line):
+  for category in relevant_categories:
+    if category in line:
+      return True
+  return False
+
+with open("./game_controller_db.txt") as file:
+  lines = file.readlines()
+  finished_header = False
+  processing_section = False
+  for line in lines:
+    if finished_header is False:
+      header_lines.append(line)
+      if line == "\n":
+        finished_header = True
+    if processing_section and line == "\n":
+      processing_section = False
+      new_db_contents.append("\n")
+    if is_relevant_category(line) and processing_section is False:
+      processing_section = True
+      new_db_contents.append(line)
+    elif processing_section:
+      new_db_contents.append(line)
+
+os.remove("./game_controller_db.txt")
+with open("./game_controller_db.txt", "w") as f:
+  f.writelines(header_lines)
+  f.writelines(new_db_contents)

.github/workflows/scripts/linux/AppRun

@@ -0,0 +1,7 @@
+#!/bin/bash
+
+ln -sf $APPDIR/usr/bin/app /tmp/PCSX2 
+
+$APPDIR/AppRun-patched
+
+unlink /tmp/PCSX2

.github/workflows/scripts/linux/app-variables.sh

@@ -0,0 +1,10 @@
+#!/bin/bash
+
+export LD_LIBRARY_PATH="$APPDIR/usr/lib:$LD_LIBRARY_PATH"
+export BINARY_NAME=$(basename "$ARGV0")
+if [[ ! -e "$PWD/$BINARY_NAME.config" ]]; then
+        mkdir "$PWD/$BINARY_NAME.config"
+fi       
+export XDG_CONFIG_HOME="$PWD/$BINARY_NAME.config"
+
+mkdir -p "$HOME"/.local/share/icons/hicolor/scalable/apps && cp "$APPDIR"/PCSX2.png "$HOME"/.local/share/icons/hicolor/scalable/apps

.github/workflows/scripts/linux/appimage.sh

@@ -0,0 +1,68 @@
+#!/bin/bash
+
+set -ex
+
+echo "${PLATFORM}"
+if [ "${PLATFORM}" == "x86" ]; then
+  APPARCH="i686"
+  ARCH="i386"
+  LIBARCH="i386-linux-gnu"
+else
+  APPARCH="x86_64"
+  ARCH="x86_64"
+  LIBARCH="x86_64-linux-gnu"
+fi
+BUILDPATH="$GITHUB_WORKSPACE"/build
+BUILDBIN="$BUILDPATH"/pcsx2
+cd /tmp
+curl -sSfLO "https://github.com/linuxdeploy/linuxdeploy/releases/download/continuous/linuxdeploy-$ARCH.AppImage"
+chmod a+x linuxdeploy*.AppImage
+./linuxdeploy-"$ARCH".AppImage --appimage-extract
+curl -sSfL "https://raw.githubusercontent.com/linuxdeploy/linuxdeploy-plugin-gtk/master/linuxdeploy-plugin-gtk.sh" -o /tmp/squashfs-root/usr/bin/linuxdeploy-plugin-gtk.sh
+chmod a+x /tmp/squashfs-root/usr/bin/linuxdeploy-plugin-gtk.sh
+mv /tmp/squashfs-root/usr/bin/patchelf /tmp/squashfs-root/usr/bin/patchelf.orig
+sudo cp /usr/local/bin/patchelf /tmp/squashfs-root/usr/bin/patchelf
+cd "$GITHUB_WORKSPACE"
+mkdir -p squashfs-root/usr/bin
+ls -al "$BUILDBIN"
+cp -P "$BUILDBIN"/pcsx2 "$GITHUB_WORKSPACE"/squashfs-root/usr/bin/
+patchelf --set-rpath /tmp/PCSX2 "$GITHUB_WORKSPACE"/squashfs-root/usr/bin/pcsx2
+cp ./pcsx2/gui/Resources/AppIcon64.png ./squashfs-root/PCSX2.png
+cp ./linux_various/PCSX2.desktop.in ./squashfs-root/PCSX2.desktop 
+sed -i -e 's|Categories=@PCSX2_MENU_CATEGORIES@|Categories=Game;Emulator;|g' ./squashfs-root/PCSX2.desktop
+sed -i -e 's|__GL_THREADED_OPTIMIZATIONS=1|__GL_THREADED_OPTIMIZATIONS=0|g' ./squashfs-root/PCSX2.desktop
+curl -sSfL "https://github.com/AppImage/AppImageKit/releases/download/continuous/runtime-$APPARCH" -o ./squashfs-root/runtime
+mkdir -p squashfs-root/usr/share/applications && cp ./squashfs-root/PCSX2.desktop ./squashfs-root/usr/share/applications
+mkdir -p squashfs-root/usr/share/icons && cp ./squashfs-root/PCSX2.png ./squashfs-root/usr/share/icons
+mkdir -p squashfs-root/usr/share/icons/hicolor/scalable/apps && cp ./squashfs-root/PCSX2.png ./squashfs-root/usr/share/icons/hicolor/scalable/apps
+mkdir -p squashfs-root/usr/share/pixmaps && cp ./squashfs-root/PCSX2.png ./squashfs-root/usr/share/pixmaps
+mkdir -p squashfs-root/usr/lib/
+mkdir -p squashfs-root/usr/optional/libstdc++
+mkdir -p squashfs-root/usr/optional/libgcc_s
+cp ./.github/workflows/scripts/linux/AppRun "$GITHUB_WORKSPACE"/squashfs-root/AppRun
+curl -sSfL "https://github.com/darealshinji/AppImageKit-checkrt/releases/download/continuous/AppRun-patched-$APPARCH" -o "$GITHUB_WORKSPACE"/squashfs-root/AppRun-patched
+curl -sSfL "https://github.com/darealshinji/AppImageKit-checkrt/releases/download/continuous/exec-$APPARCH.so" -o "$GITHUB_WORKSPACE"/squashfs-root/usr/optional/exec.so
+chmod a+x ./squashfs-root/AppRun
+chmod a+x ./squashfs-root/runtime
+chmod a+x ./squashfs-root/AppRun-patched
+chmod a+x ./squashfs-root/usr/optional/exec.so
+echo "$name" > "$GITHUB_WORKSPACE"/squashfs-root/version.txt
+mkdir -p "$GITHUB_WORKSPACE"/squashfs-root/usr/bin/app
+mkdir -p "$GITHUB_WORKSPACE"/squashfs-root/apprun-hooks
+cp -r "$GITHUB_WORKSPACE"/bin/Langs "$GITHUB_WORKSPACE"/squashfs-root/usr/bin/
+cp -r "$GITHUB_WORKSPACE"/bin/resources "$GITHUB_WORKSPACE"/squashfs-root/usr/bin/app/
+cp "$GITHUB_WORKSPACE"/bin/docs/{Configuration_Guide.pdf,PCSX2_FAQ.pdf} "$GITHUB_WORKSPACE"/squashfs-root/usr/bin/app
+cp /usr/lib/$LIBARCH/libthai.so.0 "$GITHUB_WORKSPACE"/squashfs-root/usr/lib/
+cp --dereference /usr/lib/"$LIBARCH"/libstdc++.so.6 "$GITHUB_WORKSPACE"/squashfs-root/usr/optional/libstdc++/libstdc++.so.6
+cp --dereference /lib/"$LIBARCH"/libgcc_s.so.1 "$GITHUB_WORKSPACE"/squashfs-root/usr/optional/libgcc_s/libgcc_s.so.1
+chmod +x .github/workflows/scripts/linux/app-variables.sh
+cp .github/workflows/scripts/linux/app-variables.sh "$GITHUB_WORKSPACE"/squashfs-root/apprun-hooks
+export UPD_INFO="gh-releases-zsync|PCSX2|pcsx2|latest|$name.AppImage.zsync"
+export OUTPUT="$name.AppImage"
+/tmp/squashfs-root/AppRun --appdir="$GITHUB_WORKSPACE"/squashfs-root/ --plugin gtk -d "$GITHUB_WORKSPACE"/squashfs-root/PCSX2.desktop -i "$GITHUB_WORKSPACE"/squashfs-root/PCSX2.png --output appimage
+mkdir -p "$GITHUB_WORKSPACE"/ci-artifacts/
+ls -al .
+mv "$name.AppImage" "$GITHUB_WORKSPACE"/ci-artifacts # && mv "$name.AppImage.zsync" "$GITHUB_WORKSPACE"/ci-artifacts
+chmod -R 777 ./ci-artifacts
+cd ./ci-artifacts
+ls -al .

.github/workflows/scripts/linux/compile.sh

@@ -0,0 +1,15 @@
+#!/bin/bash
+
+set -e
+
+if [ -n "${GITHUB_ACTIONS}" ]; then
+    echo "Warning: Running this script outside of GitHub Actions isn't recommended."
+fi
+
+# Prepare the Cache
+ccache -p
+ccache -z
+# Build
+ninja
+# Save the Cache
+ccache -s

.github/workflows/scripts/linux/generate-cmake.sh

@@ -0,0 +1,33 @@
+#!/bin/bash
+
+set -e
+
+if [ "${COMPILER}" = "gcc" ]; then
+  export CC=gcc-10
+  export CXX=g++-10
+else
+  export CC=clang
+  export CXX=clang++
+fi
+
+if [ "${PLATFORM}" = x86 ]; then
+  ADDITIONAL_CMAKE_ARGS="$ADDITIONAL_CMAKE_ARGS -DCMAKE_TOOLCHAIN_FILE=cmake/linux-compiler-i386-multilib.cmake"
+fi
+echo "Additional CMake Args - ${ADDITIONAL_CMAKE_ARGS}"
+
+# Generate CMake into ./build
+cmake                                       \
+-DCMAKE_CXX_COMPILER_LAUNCHER=ccache        \
+-DCMAKE_BUILD_TYPE=Release                  \
+-DPACKAGE_MODE=TRUE                         \
+-DWAYLAND_API=TRUE                          \
+-DDISABLE_ADVANCE_SIMD=TRUE                 \
+-DCMAKE_INSTALL_LIBDIR="/tmp/"              \
+-DCMAKE_INSTALL_DATADIR="/tmp/"             \
+-DCMAKE_INSTALL_DOCDIR="/tmp/PCSX2"         \
+-DOpenGL_GL_PREFERENCE="LEGACY"             \
+-DOPENGL_opengl_LIBRARY=""                  \
+-DXDG_STD=TRUE                              \
+$ADDITIONAL_CMAKE_ARGS                      \
+-GNinja                                     \
+-B build

.github/workflows/scripts/linux/install-packages.sh

@@ -0,0 +1,63 @@
+#!/bin/bash
+
+set -e
+
+# Packages - Build Environment
+declare -a BUILD_PACKAGES=(
+  "ccache"
+  "cmake"
+  "ninja-build"
+)
+
+# Packages - PCSX2
+declare -a PCSX2_PACKAGES=(
+  "libaio-dev"
+  "libbz2-dev"
+  "libegl1-mesa-dev"
+  "libgdk-pixbuf2.0-dev"
+  "libgl1-mesa-dev"
+  "libgtk-3-dev"
+  "libharfbuzz-dev"
+  "libjpeg-dev"
+  "liblzma-dev"
+  "libpcap0.8-dev"
+  "libpng-dev"
+  "libpulse-dev"
+  "librsvg2-dev"
+  "libsamplerate0-dev"
+  "libsoundtouch-dev"
+  "libudev-dev"
+  "libwxgtk3.0-gtk3-dev"
+  "libx11-xcb-dev"
+  "libxml2-dev"
+  "pkg-config"
+  "portaudio19-dev"
+  "zlib1g-dev"
+)
+
+if [ "${COMPILER}" = "gcc" ]; then
+  BUILD_PACKAGES+=("g++-10-multilib")
+else
+  BUILD_PACKAGES+=("clang-9")
+  PCSX2_PACKAGES+=("libstdc++-10-dev")
+fi
+
+# - https://github.com/actions/virtual-environments/blob/main/images/linux/Ubuntu2004-README.md
+ARCH=""
+echo "${PLATFORM}"
+if [ "${PLATFORM}" == "x86" ]; then
+  ARCH=":i386"
+  sudo dpkg --add-architecture i386
+fi
+
+sudo apt-get -qq update
+
+# Install packages needed for building
+echo "Will install the following packages for building - ${BUILD_PACKAGES[*]}"
+#sudo apt remove gcc-9 g++-9
+sudo apt-get -y install "${BUILD_PACKAGES[@]}"
+
+# Install packages needed by pcsx2
+PCSX2_PACKAGES=("${PCSX2_PACKAGES[@]/%/"${ARCH}"}")
+echo "Will install the following packages for pcsx2 - ${PCSX2_PACKAGES[*]}"
+sudo apt-get -y install "${PCSX2_PACKAGES[@]}"

.github/workflows/scripts/releases/announce-release/.gitignore

@@ -0,0 +1,2 @@
+node_modules/
+*.md

.github/workflows/scripts/releases/announce-release/index.js

@@ -0,0 +1,60 @@
+import { MessageEmbed, WebhookClient } from "discord.js";
+import * as github from '@actions/github';
+
+const releaseInfo = github.context.payload.release;
+
+if (!releaseInfo.prerelease) {
+  console.log("Not announcing - release was not a pre-release (aka a Nightly)");
+  process.exit(0);
+}
+
+const assets = releaseInfo.assets;
+let windowsAssetLinks = "";
+let linuxAssetLinks = "";
+
+for (var i = 0; i < assets.length; i++) {
+  let asset = assets[i];
+  if (asset.name.includes("symbols")) {
+    continue;
+  }
+  if (asset.name.includes("windows")) {
+    let friendlyName = asset.name;
+    try {
+      friendlyName = asset.name.split("windows-")[1].split(".7z")[0].replace("-", " ");
+    } catch (e) {
+      console.log(e);
+    }
+    windowsAssetLinks += `- [${friendlyName}](${asset.browser_download_url})\n`
+  } else if (asset.name.includes("linux")) {
+    let friendlyName = asset.name;
+    try {
+      friendlyName = asset.name.split("linux-")[1].split(".AppImage")[0].replace("-", " ");
+    } catch (e) {
+      console.log(e);
+    }
+    linuxAssetLinks += `- [${friendlyName}](${asset.browser_download_url})\n`
+  }
+}
+
+// Publish Webhook
+const embed = new MessageEmbed()
+  .setColor('#FF8000')
+  .setTitle('New PCSX2 Nightly Build Available!')
+  .addFields(
+    { name: 'Version', value: releaseInfo.tag_name, inline: true },
+    { name: 'Release Link', value: `[Github Release](${releaseInfo.html_url})`, inline: true },
+    { name: 'Installation Steps', value: '[See Here](https://github.com/PCSX2/pcsx2/wiki/Nightly-Build-Usage-Guide)', inline: true },
+    { name: 'Included Changes', value: releaseInfo.body, inline: false }
+  );
+
+if (windowsAssetLinks != "") {
+  embed.addField('Windows Downloads', windowsAssetLinks, false);
+}
+if (linuxAssetLinks != "") {
+  embed.addField('Linux Downloads', linuxAssetLinks, false);
+}
+
+const webhookClient = new WebhookClient({ url: process.env.DISCORD_BUILD_WEBHOOK });
+await webhookClient.send({
+  embeds: [embed],
+});

.github/workflows/scripts/releases/announce-release/package-lock.json

@@ -0,0 +1,814 @@
+{
+  "name": "announce-release",
+  "version": "1.0.0",
+  "lockfileVersion": 2,
+  "requires": true,
+  "packages": {
+    "": {
+      "version": "1.0.0",
+      "license": "ISC",
+      "dependencies": {
+        "@actions/github": "^5.0.0",
+        "discord.js": "^13.2.0"
+      }
+    },
+    "node_modules/@actions/github": {
+      "version": "5.0.0",
+      "resolved": "https://registry.npmjs.org/@actions/github/-/github-5.0.0.tgz",
+      "integrity": "sha512-QvE9eAAfEsS+yOOk0cylLBIO/d6WyWIOvsxxzdrPFaud39G6BOkUwScXZn1iBzQzHyu9SBkkLSWlohDWdsasAQ==",
+      "dependencies": {
+        "@actions/http-client": "^1.0.11",
+        "@octokit/core": "^3.4.0",
+        "@octokit/plugin-paginate-rest": "^2.13.3",
+        "@octokit/plugin-rest-endpoint-methods": "^5.1.1"
+      }
+    },
+    "node_modules/@actions/http-client": {
+      "version": "1.0.11",
+      "resolved": "https://registry.npmjs.org/@actions/http-client/-/http-client-1.0.11.tgz",
+      "integrity": "sha512-VRYHGQV1rqnROJqdMvGUbY/Kn8vriQe/F9HR2AlYHzmKuM/p3kjNuXhmdBfcVgsvRWTz5C5XW5xvndZrVBuAYg==",
+      "dependencies": {
+        "tunnel": "0.0.6"
+      }
+    },
+    "node_modules/@discordjs/builders": {
+      "version": "0.6.0",
+      "resolved": "https://registry.npmjs.org/@discordjs/builders/-/builders-0.6.0.tgz",
+      "integrity": "sha512-mH3Gx61LKk2CD05laCI9K5wp+a3NyASHDUGx83DGJFkqJlRlSV5WMJNY6RS37A5SjqDtGMF4wVR9jzFaqShe6Q==",
+      "dependencies": {
+        "@sindresorhus/is": "^4.0.1",
+        "discord-api-types": "^0.22.0",
+        "ow": "^0.27.0",
+        "ts-mixer": "^6.0.0",
+        "tslib": "^2.3.1"
+      },
+      "engines": {
+        "node": ">=14.0.0",
+        "npm": ">=7.0.0"
+      }
+    },
+    "node_modules/@discordjs/builders/node_modules/discord-api-types": {
+      "version": "0.22.0",
+      "resolved": "https://registry.npmjs.org/discord-api-types/-/discord-api-types-0.22.0.tgz",
+      "integrity": "sha512-l8yD/2zRbZItUQpy7ZxBJwaLX/Bs2TGaCthRppk8Sw24LOIWg12t9JEreezPoYD0SQcC2htNNo27kYEpYW/Srg==",
+      "engines": {
+        "node": ">=12"
+      }
+    },
+    "node_modules/@discordjs/collection": {
+      "version": "0.2.1",
+      "resolved": "https://registry.npmjs.org/@discordjs/collection/-/collection-0.2.1.tgz",
+      "integrity": "sha512-vhxqzzM8gkomw0TYRF3tgx7SwElzUlXT/Aa41O7mOcyN6wIJfj5JmDWaO5XGKsGSsNx7F3i5oIlrucCCWV1Nog==",
+      "engines": {
+        "node": ">=14.0.0"
+      }
+    },
+    "node_modules/@discordjs/form-data": {
+      "version": "3.0.1",
+      "resolved": "https://registry.npmjs.org/@discordjs/form-data/-/form-data-3.0.1.tgz",
+      "integrity": "sha512-ZfFsbgEXW71Rw/6EtBdrP5VxBJy4dthyC0tpQKGKmYFImlmmrykO14Za+BiIVduwjte0jXEBlhSKf0MWbFp9Eg==",
+      "dependencies": {
+        "asynckit": "^0.4.0",
+        "combined-stream": "^1.0.8",
+        "mime-types": "^2.1.12"
+      },
+      "engines": {
+        "node": ">= 6"
+      }
+    },
+    "node_modules/@octokit/auth-token": {
+      "version": "2.5.0",
+      "resolved": "https://registry.npmjs.org/@octokit/auth-token/-/auth-token-2.5.0.tgz",
+      "integrity": "sha512-r5FVUJCOLl19AxiuZD2VRZ/ORjp/4IN98Of6YJoJOkY75CIBuYfmiNHGrDwXr+aLGG55igl9QrxX3hbiXlLb+g==",
+      "dependencies": {
+        "@octokit/types": "^6.0.3"
+      }
+    },
+    "node_modules/@octokit/core": {
+      "version": "3.5.1",
+      "resolved": "https://registry.npmjs.org/@octokit/core/-/core-3.5.1.tgz",
+      "integrity": "sha512-omncwpLVxMP+GLpLPgeGJBF6IWJFjXDS5flY5VbppePYX9XehevbDykRH9PdCdvqt9TS5AOTiDide7h0qrkHjw==",
+      "dependencies": {
+        "@octokit/auth-token": "^2.4.4",
+        "@octokit/graphql": "^4.5.8",
+        "@octokit/request": "^5.6.0",
+        "@octokit/request-error": "^2.0.5",
+        "@octokit/types": "^6.0.3",
+        "before-after-hook": "^2.2.0",
+        "universal-user-agent": "^6.0.0"
+      }
+    },
+    "node_modules/@octokit/endpoint": {
+      "version": "6.0.12",
+      "resolved": "https://registry.npmjs.org/@octokit/endpoint/-/endpoint-6.0.12.tgz",
+      "integrity": "sha512-lF3puPwkQWGfkMClXb4k/eUT/nZKQfxinRWJrdZaJO85Dqwo/G0yOC434Jr2ojwafWJMYqFGFa5ms4jJUgujdA==",
+      "dependencies": {
+        "@octokit/types": "^6.0.3",
+        "is-plain-object": "^5.0.0",
+        "universal-user-agent": "^6.0.0"
+      }
+    },
+    "node_modules/@octokit/graphql": {
+      "version": "4.8.0",
+      "resolved": "https://registry.npmjs.org/@octokit/graphql/-/graphql-4.8.0.tgz",
+      "integrity": "sha512-0gv+qLSBLKF0z8TKaSKTsS39scVKF9dbMxJpj3U0vC7wjNWFuIpL/z76Qe2fiuCbDRcJSavkXsVtMS6/dtQQsg==",
+      "dependencies": {
+        "@octokit/request": "^5.6.0",
+        "@octokit/types": "^6.0.3",
+        "universal-user-agent": "^6.0.0"
+      }
+    },
+    "node_modules/@octokit/openapi-types": {
+      "version": "11.1.0",
+      "resolved": "https://registry.npmjs.org/@octokit/openapi-types/-/openapi-types-11.1.0.tgz",
+      "integrity": "sha512-dWZfYvCCdjZzDYA3lIAMF72Q0jld8xidqCq5Ryw09eBJXZdcM6he0vWBTvw/b5UnGYqexxOyHWgfrsTlUJL3Gw=="
+    },
+    "node_modules/@octokit/plugin-paginate-rest": {
+      "version": "2.16.9",
+      "resolved": "https://registry.npmjs.org/@octokit/plugin-paginate-rest/-/plugin-paginate-rest-2.16.9.tgz",
+      "integrity": "sha512-gfSCMgz5scFKsR0dW4jaYsDJVt/UwCHp4dF7sHlmSekZvwzvLiOAGZ4MQkEsL5DW9hIk2W+UQkYZMTA1b6Wsqw==",
+      "dependencies": {
+        "@octokit/types": "^6.33.0"
+      }
+    },
+    "node_modules/@octokit/plugin-rest-endpoint-methods": {
+      "version": "5.12.1",
+      "resolved": "https://registry.npmjs.org/@octokit/plugin-rest-endpoint-methods/-/plugin-rest-endpoint-methods-5.12.1.tgz",
+      "integrity": "sha512-0nY3htfl6x9UkPcqv8pm9vOC/bTA7f4IMDWln13neHRdNWQvOQgZ9fRxK7BAc74rye4yVINEFi9Yb9rnGUvosA==",
+      "dependencies": {
+        "@octokit/types": "^6.33.0",
+        "deprecation": "^2.3.1"
+      }
+    },
+    "node_modules/@octokit/request": {
+      "version": "5.6.2",
+      "resolved": "https://registry.npmjs.org/@octokit/request/-/request-5.6.2.tgz",
+      "integrity": "sha512-je66CvSEVf0jCpRISxkUcCa0UkxmFs6eGDRSbfJtAVwbLH5ceqF+YEyC8lj8ystKyZTy8adWr0qmkY52EfOeLA==",
+      "dependencies": {
+        "@octokit/endpoint": "^6.0.1",
+        "@octokit/request-error": "^2.1.0",
+        "@octokit/types": "^6.16.1",
+        "is-plain-object": "^5.0.0",
+        "node-fetch": "^2.6.1",
+        "universal-user-agent": "^6.0.0"
+      }
+    },
+    "node_modules/@octokit/request-error": {
+      "version": "2.1.0",
+      "resolved": "https://registry.npmjs.org/@octokit/request-error/-/request-error-2.1.0.tgz",
+      "integrity": "sha512-1VIvgXxs9WHSjicsRwq8PlR2LR2x6DwsJAaFgzdi0JfJoGSO8mYI/cHJQ+9FbN21aa+DrgNLnwObmyeSC8Rmpg==",
+      "dependencies": {
+        "@octokit/types": "^6.0.3",
+        "deprecation": "^2.0.0",
+        "once": "^1.4.0"
+      }
+    },
+    "node_modules/@octokit/types": {
+      "version": "6.33.0",
+      "resolved": "https://registry.npmjs.org/@octokit/types/-/types-6.33.0.tgz",
+      "integrity": "sha512-0zffZ048M0UhthyPXQHLz4038Ak46nMWZXkzlXvXB/M/L1jYPBceq4iZj4qjKVrvveaJrrgKdJ9+3yUuITfcCw==",
+      "dependencies": {
+        "@octokit/openapi-types": "^11.1.0"
+      }
+    },
+    "node_modules/@sapphire/async-queue": {
+      "version": "1.1.6",
+      "resolved": "https://registry.npmjs.org/@sapphire/async-queue/-/async-queue-1.1.6.tgz",
+      "integrity": "sha512-M5CbgMgesemMUCQo5G/InGHvp+GZx6uuJNV1iwvSWD8EFNVrfxaTcqhcAXM3MPYkjlxvNnoDNk0R1lfzvca6LA==",
+      "engines": {
+        "node": ">=v14.18.0",
+        "npm": ">=7.24.2"
+      }
+    },
+    "node_modules/@sindresorhus/is": {
+      "version": "4.2.0",
+      "resolved": "https://registry.npmjs.org/@sindresorhus/is/-/is-4.2.0.tgz",
+      "integrity": "sha512-VkE3KLBmJwcCaVARtQpfuKcKv8gcBmUubrfHGF84dXuuW6jgsRYxPtzcIhPyK9WAPpRt2/xY6zkD9MnRaJzSyw==",
+      "engines": {
+        "node": ">=10"
+      },
+      "funding": {
+        "url": "https://github.com/sindresorhus/is?sponsor=1"
+      }
+    },
+    "node_modules/@types/node": {
+      "version": "16.10.3",
+      "resolved": "https://registry.npmjs.org/@types/node/-/node-16.10.3.tgz",
+      "integrity": "sha512-ho3Ruq+fFnBrZhUYI46n/bV2GjwzSkwuT4dTf0GkuNFmnb8nq4ny2z9JEVemFi6bdEJanHLlYfy9c6FN9B9McQ=="
+    },
+    "node_modules/@types/ws": {
+      "version": "8.2.0",
+      "resolved": "https://registry.npmjs.org/@types/ws/-/ws-8.2.0.tgz",
+      "integrity": "sha512-cyeefcUCgJlEk+hk2h3N+MqKKsPViQgF5boi9TTHSK+PoR9KWBb/C5ccPcDyAqgsbAYHTwulch725DV84+pSpg==",
+      "dependencies": {
+        "@types/node": "*"
+      }
+    },
+    "node_modules/asynckit": {
+      "version": "0.4.0",
+      "resolved": "https://registry.npmjs.org/asynckit/-/asynckit-0.4.0.tgz",
+      "integrity": "sha1-x57Zf380y48robyXkLzDZkdLS3k="
+    },
+    "node_modules/before-after-hook": {
+      "version": "2.2.2",
+      "resolved": "https://registry.npmjs.org/before-after-hook/-/before-after-hook-2.2.2.tgz",
+      "integrity": "sha512-3pZEU3NT5BFUo/AD5ERPWOgQOCZITni6iavr5AUw5AUwQjMlI0kzu5btnyD39AF0gUEsDPwJT+oY1ORBJijPjQ=="
+    },
+    "node_modules/callsites": {
+      "version": "3.1.0",
+      "resolved": "https://registry.npmjs.org/callsites/-/callsites-3.1.0.tgz",
+      "integrity": "sha512-P8BjAsXvZS+VIDUI11hHCQEv74YT67YUi5JJFNWIqL235sBmjX4+qx9Muvls5ivyNENctx46xQLQ3aTuE7ssaQ==",
+      "engines": {
+        "node": ">=6"
+      }
+    },
+    "node_modules/combined-stream": {
+      "version": "1.0.8",
+      "resolved": "https://registry.npmjs.org/combined-stream/-/combined-stream-1.0.8.tgz",
+      "integrity": "sha512-FQN4MRfuJeHf7cBbBMJFXhKSDq+2kAArBlmRBvcvFE5BB1HZKXtSFASDhdlz9zOYwxh8lDdnvmMOe/+5cdoEdg==",
+      "dependencies": {
+        "delayed-stream": "~1.0.0"
+      },
+      "engines": {
+        "node": ">= 0.8"
+      }
+    },
+    "node_modules/delayed-stream": {
+      "version": "1.0.0",
+      "resolved": "https://registry.npmjs.org/delayed-stream/-/delayed-stream-1.0.0.tgz",
+      "integrity": "sha1-3zrhmayt+31ECqrgsp4icrJOxhk=",
+      "engines": {
+        "node": ">=0.4.0"
+      }
+    },
+    "node_modules/deprecation": {
+      "version": "2.3.1",
+      "resolved": "https://registry.npmjs.org/deprecation/-/deprecation-2.3.1.tgz",
+      "integrity": "sha512-xmHIy4F3scKVwMsQ4WnVaS8bHOx0DmVwRywosKhaILI0ywMDWPtBSku2HNxRvF7jtwDRsoEwYQSfbxj8b7RlJQ=="
+    },
+    "node_modules/discord-api-types": {
+      "version": "0.23.1",
+      "resolved": "https://registry.npmjs.org/discord-api-types/-/discord-api-types-0.23.1.tgz",
+      "integrity": "sha512-igWmn+45mzXRWNEPU25I/pr8MwxHb767wAr51oy3VRLRcTlp5ADBbrBR0lq3SA1Rfw3MtM4TQu1xo3kxscfVdQ==",
+      "engines": {
+        "node": ">=12"
+      }
+    },
+    "node_modules/discord.js": {
+      "version": "13.2.0",
+      "resolved": "https://registry.npmjs.org/discord.js/-/discord.js-13.2.0.tgz",
+      "integrity": "sha512-nyxUvL8wuQG38zx13wUMkpcA8koFszyiXdkSLwwM9opKW2LC2H5gD0cTZxImeJ6GtEnKPWT8xBiE8lLBmbNIhw==",
+      "dependencies": {
+        "@discordjs/builders": "^0.6.0",
+        "@discordjs/collection": "^0.2.1",
+        "@discordjs/form-data": "^3.0.1",
+        "@sapphire/async-queue": "^1.1.5",
+        "@types/ws": "^8.2.0",
+        "discord-api-types": "^0.23.1",
+        "node-fetch": "^2.6.1",
+        "ws": "^8.2.3"
+      },
+      "engines": {
+        "node": ">=16.6.0",
+        "npm": ">=7.0.0"
+      }
+    },
+    "node_modules/dot-prop": {
+      "version": "6.0.1",
+      "resolved": "https://registry.npmjs.org/dot-prop/-/dot-prop-6.0.1.tgz",
+      "integrity": "sha512-tE7ztYzXHIeyvc7N+hR3oi7FIbf/NIjVP9hmAt3yMXzrQ072/fpjGLx2GxNxGxUl5V73MEqYzioOMoVhGMJ5cA==",
+      "dependencies": {
+        "is-obj": "^2.0.0"
+      },
+      "engines": {
+        "node": ">=10"
+      },
+      "funding": {
+        "url": "https://github.com/sponsors/sindresorhus"
+      }
+    },
+    "node_modules/is-obj": {
+      "version": "2.0.0",
+      "resolved": "https://registry.npmjs.org/is-obj/-/is-obj-2.0.0.tgz",
+      "integrity": "sha512-drqDG3cbczxxEJRoOXcOjtdp1J/lyp1mNn0xaznRs8+muBhgQcrnbspox5X5fOw0HnMnbfDzvnEMEtqDEJEo8w==",
+      "engines": {
+        "node": ">=8"
+      }
+    },
+    "node_modules/is-plain-object": {
+      "version": "5.0.0",
+      "resolved": "https://registry.npmjs.org/is-plain-object/-/is-plain-object-5.0.0.tgz",
+      "integrity": "sha512-VRSzKkbMm5jMDoKLbltAkFQ5Qr7VDiTFGXxYFXXowVj387GeGNOCsOH6Msy00SGZ3Fp84b1Naa1psqgcCIEP5Q==",
+      "engines": {
+        "node": ">=0.10.0"
+      }
+    },
+    "node_modules/lodash.isequal": {
+      "version": "4.5.0",
+      "resolved": "https://registry.npmjs.org/lodash.isequal/-/lodash.isequal-4.5.0.tgz",
+      "integrity": "sha1-QVxEePK8wwEgwizhDtMib30+GOA="
+    },
+    "node_modules/mime-db": {
+      "version": "1.50.0",
+      "resolved": "https://registry.npmjs.org/mime-db/-/mime-db-1.50.0.tgz",
+      "integrity": "sha512-9tMZCDlYHqeERXEHO9f/hKfNXhre5dK2eE/krIvUjZbS2KPcqGDfNShIWS1uW9XOTKQKqK6qbeOci18rbfW77A==",
+      "engines": {
+        "node": ">= 0.6"
+      }
+    },
+    "node_modules/mime-types": {
+      "version": "2.1.33",
+      "resolved": "https://registry.npmjs.org/mime-types/-/mime-types-2.1.33.tgz",
+      "integrity": "sha512-plLElXp7pRDd0bNZHw+nMd52vRYjLwQjygaNg7ddJ2uJtTlmnTCjWuPKxVu6//AdaRuME84SvLW91sIkBqGT0g==",
+      "dependencies": {
+        "mime-db": "1.50.0"
+      },
+      "engines": {
+        "node": ">= 0.6"
+      }
+    },
+    "node_modules/node-fetch": {
+      "version": "2.6.7",
+      "resolved": "https://registry.npmjs.org/node-fetch/-/node-fetch-2.6.7.tgz",
+      "integrity": "sha512-ZjMPFEfVx5j+y2yF35Kzx5sF7kDzxuDj6ziH4FFbOp87zKDZNx8yExJIb05OGF4Nlt9IHFIMBkRl41VdvcNdbQ==",
+      "dependencies": {
+        "whatwg-url": "^5.0.0"
+      },
+      "engines": {
+        "node": "4.x || >=6.0.0"
+      },
+      "peerDependencies": {
+        "encoding": "^0.1.0"
+      },
+      "peerDependenciesMeta": {
+        "encoding": {
+          "optional": true
+        }
+      }
+    },
+    "node_modules/once": {
+      "version": "1.4.0",
+      "resolved": "https://registry.npmjs.org/once/-/once-1.4.0.tgz",
+      "integrity": "sha1-WDsap3WWHUsROsF9nFC6753Xa9E=",
+      "dependencies": {
+        "wrappy": "1"
+      }
+    },
+    "node_modules/ow": {
+      "version": "0.27.0",
+      "resolved": "https://registry.npmjs.org/ow/-/ow-0.27.0.tgz",
+      "integrity": "sha512-SGnrGUbhn4VaUGdU0EJLMwZWSupPmF46hnTRII7aCLCrqixTAC5eKo8kI4/XXf1eaaI8YEVT+3FeGNJI9himAQ==",
+      "dependencies": {
+        "@sindresorhus/is": "^4.0.1",
+        "callsites": "^3.1.0",
+        "dot-prop": "^6.0.1",
+        "lodash.isequal": "^4.5.0",
+        "type-fest": "^1.2.1",
+        "vali-date": "^1.0.0"
+      },
+      "engines": {
+        "node": ">=12"
+      },
+      "funding": {
+        "url": "https://github.com/sponsors/sindresorhus"
+      }
+    },
+    "node_modules/tr46": {
+      "version": "0.0.3",
+      "resolved": "https://registry.npmjs.org/tr46/-/tr46-0.0.3.tgz",
+      "integrity": "sha1-gYT9NH2snNwYWZLzpmIuFLnZq2o="
+    },
+    "node_modules/ts-mixer": {
+      "version": "6.0.0",
+      "resolved": "https://registry.npmjs.org/ts-mixer/-/ts-mixer-6.0.0.tgz",
+      "integrity": "sha512-nXIb1fvdY5CBSrDIblLn73NW0qRDk5yJ0Sk1qPBF560OdJfQp9jhl+0tzcY09OZ9U+6GpeoI9RjwoIKFIoB9MQ=="
+    },
+    "node_modules/tslib": {
+      "version": "2.3.1",
+      "resolved": "https://registry.npmjs.org/tslib/-/tslib-2.3.1.tgz",
+      "integrity": "sha512-77EbyPPpMz+FRFRuAFlWMtmgUWGe9UOG2Z25NqCwiIjRhOf5iKGuzSe5P2w1laq+FkRy4p+PCuVkJSGkzTEKVw=="
+    },
+    "node_modules/tunnel": {
+      "version": "0.0.6",
+      "resolved": "https://registry.npmjs.org/tunnel/-/tunnel-0.0.6.tgz",
+      "integrity": "sha512-1h/Lnq9yajKY2PEbBadPXj3VxsDDu844OnaAo52UVmIzIvwwtBPIuNvkjuzBlTWpfJyUbG3ez0KSBibQkj4ojg==",
+      "engines": {
+        "node": ">=0.6.11 <=0.7.0 || >=0.7.3"
+      }
+    },
+    "node_modules/type-fest": {
+      "version": "1.4.0",
+      "resolved": "https://registry.npmjs.org/type-fest/-/type-fest-1.4.0.tgz",
+      "integrity": "sha512-yGSza74xk0UG8k+pLh5oeoYirvIiWo5t0/o3zHHAO2tRDiZcxWP7fywNlXhqb6/r6sWvwi+RsyQMWhVLe4BVuA==",
+      "engines": {
+        "node": ">=10"
+      },
+      "funding": {
+        "url": "https://github.com/sponsors/sindresorhus"
+      }
+    },
+    "node_modules/universal-user-agent": {
+      "version": "6.0.0",
+      "resolved": "https://registry.npmjs.org/universal-user-agent/-/universal-user-agent-6.0.0.tgz",
+      "integrity": "sha512-isyNax3wXoKaulPDZWHQqbmIx1k2tb9fb3GGDBRxCscfYV2Ch7WxPArBsFEG8s/safwXTT7H4QGhaIkTp9447w=="
+    },
+    "node_modules/vali-date": {
+      "version": "1.0.0",
+      "resolved": "https://registry.npmjs.org/vali-date/-/vali-date-1.0.0.tgz",
+      "integrity": "sha1-G5BKWWCfsyjvB4E4Qgk09rhnCaY=",
+      "engines": {
+        "node": ">=0.10.0"
+      }
+    },
+    "node_modules/webidl-conversions": {
+      "version": "3.0.1",
+      "resolved": "https://registry.npmjs.org/webidl-conversions/-/webidl-conversions-3.0.1.tgz",
+      "integrity": "sha1-JFNCdeKnvGvnvIZhHMFq4KVlSHE="
+    },
+    "node_modules/whatwg-url": {
+      "version": "5.0.0",
+      "resolved": "https://registry.npmjs.org/whatwg-url/-/whatwg-url-5.0.0.tgz",
+      "integrity": "sha1-lmRU6HZUYuN2RNNib2dCzotwll0=",
+      "dependencies": {
+        "tr46": "~0.0.3",
+        "webidl-conversions": "^3.0.0"
+      }
+    },
+    "node_modules/wrappy": {
+      "version": "1.0.2",
+      "resolved": "https://registry.npmjs.org/wrappy/-/wrappy-1.0.2.tgz",
+      "integrity": "sha1-tSQ9jz7BqjXxNkYFvA0QNuMKtp8="
+    },
+    "node_modules/ws": {
+      "version": "8.2.3",
+      "resolved": "https://registry.npmjs.org/ws/-/ws-8.2.3.tgz",
+      "integrity": "sha512-wBuoj1BDpC6ZQ1B7DWQBYVLphPWkm8i9Y0/3YdHjHKHiohOJ1ws+3OccDWtH+PoC9DZD5WOTrJvNbWvjS6JWaA==",
+      "engines": {
+        "node": ">=10.0.0"
+      },
+      "peerDependencies": {
+        "bufferutil": "^4.0.1",
+        "utf-8-validate": "^5.0.2"
+      },
+      "peerDependenciesMeta": {
+        "bufferutil": {
+          "optional": true
+        },
+        "utf-8-validate": {
+          "optional": true
+        }
+      }
+    }
+  },
+  "dependencies": {
+    "@actions/github": {
+      "version": "5.0.0",
+      "resolved": "https://registry.npmjs.org/@actions/github/-/github-5.0.0.tgz",
+      "integrity": "sha512-QvE9eAAfEsS+yOOk0cylLBIO/d6WyWIOvsxxzdrPFaud39G6BOkUwScXZn1iBzQzHyu9SBkkLSWlohDWdsasAQ==",
+      "requires": {
+        "@actions/http-client": "^1.0.11",
+        "@octokit/core": "^3.4.0",
+        "@octokit/plugin-paginate-rest": "^2.13.3",
+        "@octokit/plugin-rest-endpoint-methods": "^5.1.1"
+      }
+    },
+    "@actions/http-client": {
+      "version": "1.0.11",
+      "resolved": "https://registry.npmjs.org/@actions/http-client/-/http-client-1.0.11.tgz",
+      "integrity": "sha512-VRYHGQV1rqnROJqdMvGUbY/Kn8vriQe/F9HR2AlYHzmKuM/p3kjNuXhmdBfcVgsvRWTz5C5XW5xvndZrVBuAYg==",
+      "requires": {
+        "tunnel": "0.0.6"
+      }
+    },
+    "@discordjs/builders": {
+      "version": "0.6.0",
+      "resolved": "https://registry.npmjs.org/@discordjs/builders/-/builders-0.6.0.tgz",
+      "integrity": "sha512-mH3Gx61LKk2CD05laCI9K5wp+a3NyASHDUGx83DGJFkqJlRlSV5WMJNY6RS37A5SjqDtGMF4wVR9jzFaqShe6Q==",
+      "requires": {
+        "@sindresorhus/is": "^4.0.1",
+        "discord-api-types": "^0.22.0",
+        "ow": "^0.27.0",
+        "ts-mixer": "^6.0.0",
+        "tslib": "^2.3.1"
+      },
+      "dependencies": {
+        "discord-api-types": {
+          "version": "0.22.0",
+          "resolved": "https://registry.npmjs.org/discord-api-types/-/discord-api-types-0.22.0.tgz",
+          "integrity": "sha512-l8yD/2zRbZItUQpy7ZxBJwaLX/Bs2TGaCthRppk8Sw24LOIWg12t9JEreezPoYD0SQcC2htNNo27kYEpYW/Srg=="
+        }
+      }
+    },
+    "@discordjs/collection": {
+      "version": "0.2.1",
+      "resolved": "https://registry.npmjs.org/@discordjs/collection/-/collection-0.2.1.tgz",
+      "integrity": "sha512-vhxqzzM8gkomw0TYRF3tgx7SwElzUlXT/Aa41O7mOcyN6wIJfj5JmDWaO5XGKsGSsNx7F3i5oIlrucCCWV1Nog=="
+    },
+    "@discordjs/form-data": {
+      "version": "3.0.1",
+      "resolved": "https://registry.npmjs.org/@discordjs/form-data/-/form-data-3.0.1.tgz",
+      "integrity": "sha512-ZfFsbgEXW71Rw/6EtBdrP5VxBJy4dthyC0tpQKGKmYFImlmmrykO14Za+BiIVduwjte0jXEBlhSKf0MWbFp9Eg==",
+      "requires": {
+        "asynckit": "^0.4.0",
+        "combined-stream": "^1.0.8",
+        "mime-types": "^2.1.12"
+      }
+    },
+    "@octokit/auth-token": {
+      "version": "2.5.0",
+      "resolved": "https://registry.npmjs.org/@octokit/auth-token/-/auth-token-2.5.0.tgz",
+      "integrity": "sha512-r5FVUJCOLl19AxiuZD2VRZ/ORjp/4IN98Of6YJoJOkY75CIBuYfmiNHGrDwXr+aLGG55igl9QrxX3hbiXlLb+g==",
+      "requires": {
+        "@octokit/types": "^6.0.3"
+      }
+    },
+    "@octokit/core": {
+      "version": "3.5.1",
+      "resolved": "https://registry.npmjs.org/@octokit/core/-/core-3.5.1.tgz",
+      "integrity": "sha512-omncwpLVxMP+GLpLPgeGJBF6IWJFjXDS5flY5VbppePYX9XehevbDykRH9PdCdvqt9TS5AOTiDide7h0qrkHjw==",
+      "requires": {
+        "@octokit/auth-token": "^2.4.4",
+        "@octokit/graphql": "^4.5.8",
+        "@octokit/request": "^5.6.0",
+        "@octokit/request-error": "^2.0.5",
+        "@octokit/types": "^6.0.3",
+        "before-after-hook": "^2.2.0",
+        "universal-user-agent": "^6.0.0"
+      }
+    },
+    "@octokit/endpoint": {
+      "version": "6.0.12",
+      "resolved": "https://registry.npmjs.org/@octokit/endpoint/-/endpoint-6.0.12.tgz",
+      "integrity": "sha512-lF3puPwkQWGfkMClXb4k/eUT/nZKQfxinRWJrdZaJO85Dqwo/G0yOC434Jr2ojwafWJMYqFGFa5ms4jJUgujdA==",
+      "requires": {
+        "@octokit/types": "^6.0.3",
+        "is-plain-object": "^5.0.0",
+        "universal-user-agent": "^6.0.0"
+      }
+    },
+    "@octokit/graphql": {
+      "version": "4.8.0",
+      "resolved": "https://registry.npmjs.org/@octokit/graphql/-/graphql-4.8.0.tgz",
+      "integrity": "sha512-0gv+qLSBLKF0z8TKaSKTsS39scVKF9dbMxJpj3U0vC7wjNWFuIpL/z76Qe2fiuCbDRcJSavkXsVtMS6/dtQQsg==",
+      "requires": {
+        "@octokit/request": "^5.6.0",
+        "@octokit/types": "^6.0.3",
+        "universal-user-agent": "^6.0.0"
+      }
+    },
+    "@octokit/openapi-types": {
+      "version": "11.1.0",
+      "resolved": "https://registry.npmjs.org/@octokit/openapi-types/-/openapi-types-11.1.0.tgz",
+      "integrity": "sha512-dWZfYvCCdjZzDYA3lIAMF72Q0jld8xidqCq5Ryw09eBJXZdcM6he0vWBTvw/b5UnGYqexxOyHWgfrsTlUJL3Gw=="
+    },
+    "@octokit/plugin-paginate-rest": {
+      "version": "2.16.9",
+      "resolved": "https://registry.npmjs.org/@octokit/plugin-paginate-rest/-/plugin-paginate-rest-2.16.9.tgz",
+      "integrity": "sha512-gfSCMgz5scFKsR0dW4jaYsDJVt/UwCHp4dF7sHlmSekZvwzvLiOAGZ4MQkEsL5DW9hIk2W+UQkYZMTA1b6Wsqw==",
+      "requires": {
+        "@octokit/types": "^6.33.0"
+      }
+    },
+    "@octokit/plugin-rest-endpoint-methods": {
+      "version": "5.12.1",
+      "resolved": "https://registry.npmjs.org/@octokit/plugin-rest-endpoint-methods/-/plugin-rest-endpoint-methods-5.12.1.tgz",
+      "integrity": "sha512-0nY3htfl6x9UkPcqv8pm9vOC/bTA7f4IMDWln13neHRdNWQvOQgZ9fRxK7BAc74rye4yVINEFi9Yb9rnGUvosA==",
+      "requires": {
+        "@octokit/types": "^6.33.0",
+        "deprecation": "^2.3.1"
+      }
+    },
+    "@octokit/request": {
+      "version": "5.6.2",
+      "resolved": "https://registry.npmjs.org/@octokit/request/-/request-5.6.2.tgz",
+      "integrity": "sha512-je66CvSEVf0jCpRISxkUcCa0UkxmFs6eGDRSbfJtAVwbLH5ceqF+YEyC8lj8ystKyZTy8adWr0qmkY52EfOeLA==",
+      "requires": {
+        "@octokit/endpoint": "^6.0.1",
+        "@octokit/request-error": "^2.1.0",
+        "@octokit/types": "^6.16.1",
+        "is-plain-object": "^5.0.0",
+        "node-fetch": "^2.6.1",
+        "universal-user-agent": "^6.0.0"
+      }
+    },
+    "@octokit/request-error": {
+      "version": "2.1.0",
+      "resolved": "https://registry.npmjs.org/@octokit/request-error/-/request-error-2.1.0.tgz",
+      "integrity": "sha512-1VIvgXxs9WHSjicsRwq8PlR2LR2x6DwsJAaFgzdi0JfJoGSO8mYI/cHJQ+9FbN21aa+DrgNLnwObmyeSC8Rmpg==",
+      "requires": {
+        "@octokit/types": "^6.0.3",
+        "deprecation": "^2.0.0",
+        "once": "^1.4.0"
+      }
+    },
+    "@octokit/types": {
+      "version": "6.33.0",
+      "resolved": "https://registry.npmjs.org/@octokit/types/-/types-6.33.0.tgz",
+      "integrity": "sha512-0zffZ048M0UhthyPXQHLz4038Ak46nMWZXkzlXvXB/M/L1jYPBceq4iZj4qjKVrvveaJrrgKdJ9+3yUuITfcCw==",
+      "requires": {
+        "@octokit/openapi-types": "^11.1.0"
+      }
+    },
+    "@sapphire/async-queue": {
+      "version": "1.1.6",
+      "resolved": "https://registry.npmjs.org/@sapphire/async-queue/-/async-queue-1.1.6.tgz",
+      "integrity": "sha512-M5CbgMgesemMUCQo5G/InGHvp+GZx6uuJNV1iwvSWD8EFNVrfxaTcqhcAXM3MPYkjlxvNnoDNk0R1lfzvca6LA=="
+    },
+    "@sindresorhus/is": {
+      "version": "4.2.0",
+      "resolved": "https://registry.npmjs.org/@sindresorhus/is/-/is-4.2.0.tgz",
+      "integrity": "sha512-VkE3KLBmJwcCaVARtQpfuKcKv8gcBmUubrfHGF84dXuuW6jgsRYxPtzcIhPyK9WAPpRt2/xY6zkD9MnRaJzSyw=="
+    },
+    "@types/node": {
+      "version": "16.10.3",
+      "resolved": "https://registry.npmjs.org/@types/node/-/node-16.10.3.tgz",
+      "integrity": "sha512-ho3Ruq+fFnBrZhUYI46n/bV2GjwzSkwuT4dTf0GkuNFmnb8nq4ny2z9JEVemFi6bdEJanHLlYfy9c6FN9B9McQ=="
+    },
+    "@types/ws": {
+      "version": "8.2.0",
+      "resolved": "https://registry.npmjs.org/@types/ws/-/ws-8.2.0.tgz",
+      "integrity": "sha512-cyeefcUCgJlEk+hk2h3N+MqKKsPViQgF5boi9TTHSK+PoR9KWBb/C5ccPcDyAqgsbAYHTwulch725DV84+pSpg==",
+      "requires": {
+        "@types/node": "*"
+      }
+    },
+    "asynckit": {
+      "version": "0.4.0",
+      "resolved": "https://registry.npmjs.org/asynckit/-/asynckit-0.4.0.tgz",
+      "integrity": "sha1-x57Zf380y48robyXkLzDZkdLS3k="
+    },
+    "before-after-hook": {
+      "version": "2.2.2",
+      "resolved": "https://registry.npmjs.org/before-after-hook/-/before-after-hook-2.2.2.tgz",
+      "integrity": "sha512-3pZEU3NT5BFUo/AD5ERPWOgQOCZITni6iavr5AUw5AUwQjMlI0kzu5btnyD39AF0gUEsDPwJT+oY1ORBJijPjQ=="
+    },
+    "callsites": {
+      "version": "3.1.0",
+      "resolved": "https://registry.npmjs.org/callsites/-/callsites-3.1.0.tgz",
+      "integrity": "sha512-P8BjAsXvZS+VIDUI11hHCQEv74YT67YUi5JJFNWIqL235sBmjX4+qx9Muvls5ivyNENctx46xQLQ3aTuE7ssaQ=="
+    },
+    "combined-stream": {
+      "version": "1.0.8",
+      "resolved": "https://registry.npmjs.org/combined-stream/-/combined-stream-1.0.8.tgz",
+      "integrity": "sha512-FQN4MRfuJeHf7cBbBMJFXhKSDq+2kAArBlmRBvcvFE5BB1HZKXtSFASDhdlz9zOYwxh8lDdnvmMOe/+5cdoEdg==",
+      "requires": {
+        "delayed-stream": "~1.0.0"
+      }
+    },
+    "delayed-stream": {
+      "version": "1.0.0",
+      "resolved": "https://registry.npmjs.org/delayed-stream/-/delayed-stream-1.0.0.tgz",
+      "integrity": "sha1-3zrhmayt+31ECqrgsp4icrJOxhk="
+    },
+    "deprecation": {
+      "version": "2.3.1",
+      "resolved": "https://registry.npmjs.org/deprecation/-/deprecation-2.3.1.tgz",
+      "integrity": "sha512-xmHIy4F3scKVwMsQ4WnVaS8bHOx0DmVwRywosKhaILI0ywMDWPtBSku2HNxRvF7jtwDRsoEwYQSfbxj8b7RlJQ=="
+    },
+    "discord-api-types": {
+      "version": "0.23.1",
+      "resolved": "https://registry.npmjs.org/discord-api-types/-/discord-api-types-0.23.1.tgz",
+      "integrity": "sha512-igWmn+45mzXRWNEPU25I/pr8MwxHb767wAr51oy3VRLRcTlp5ADBbrBR0lq3SA1Rfw3MtM4TQu1xo3kxscfVdQ=="
+    },
+    "discord.js": {
+      "version": "13.2.0",
+      "resolved": "https://registry.npmjs.org/discord.js/-/discord.js-13.2.0.tgz",
+      "integrity": "sha512-nyxUvL8wuQG38zx13wUMkpcA8koFszyiXdkSLwwM9opKW2LC2H5gD0cTZxImeJ6GtEnKPWT8xBiE8lLBmbNIhw==",
+      "requires": {
+        "@discordjs/builders": "^0.6.0",
+        "@discordjs/collection": "^0.2.1",
+        "@discordjs/form-data": "^3.0.1",
+        "@sapphire/async-queue": "^1.1.5",
+        "@types/ws": "^8.2.0",
+        "discord-api-types": "^0.23.1",
+        "node-fetch": "^2.6.1",
+        "ws": "^8.2.3"
+      }
+    },
+    "dot-prop": {
+      "version": "6.0.1",
+      "resolved": "https://registry.npmjs.org/dot-prop/-/dot-prop-6.0.1.tgz",
+      "integrity": "sha512-tE7ztYzXHIeyvc7N+hR3oi7FIbf/NIjVP9hmAt3yMXzrQ072/fpjGLx2GxNxGxUl5V73MEqYzioOMoVhGMJ5cA==",
+      "requires": {
+        "is-obj": "^2.0.0"
+      }
+    },
+    "is-obj": {
+      "version": "2.0.0",
+      "resolved": "https://registry.npmjs.org/is-obj/-/is-obj-2.0.0.tgz",
+      "integrity": "sha512-drqDG3cbczxxEJRoOXcOjtdp1J/lyp1mNn0xaznRs8+muBhgQcrnbspox5X5fOw0HnMnbfDzvnEMEtqDEJEo8w=="
+    },
+    "is-plain-object": {
+      "version": "5.0.0",
+      "resolved": "https://registry.npmjs.org/is-plain-object/-/is-plain-object-5.0.0.tgz",
+      "integrity": "sha512-VRSzKkbMm5jMDoKLbltAkFQ5Qr7VDiTFGXxYFXXowVj387GeGNOCsOH6Msy00SGZ3Fp84b1Naa1psqgcCIEP5Q=="
+    },
+    "lodash.isequal": {
+      "version": "4.5.0",
+      "resolved": "https://registry.npmjs.org/lodash.isequal/-/lodash.isequal-4.5.0.tgz",
+      "integrity": "sha1-QVxEePK8wwEgwizhDtMib30+GOA="
+    },
+    "mime-db": {
+      "version": "1.50.0",
+      "resolved": "https://registry.npmjs.org/mime-db/-/mime-db-1.50.0.tgz",
+      "integrity": "sha512-9tMZCDlYHqeERXEHO9f/hKfNXhre5dK2eE/krIvUjZbS2KPcqGDfNShIWS1uW9XOTKQKqK6qbeOci18rbfW77A=="
+    },
+    "mime-types": {
+      "version": "2.1.33",
+      "resolved": "https://registry.npmjs.org/mime-types/-/mime-types-2.1.33.tgz",
+      "integrity": "sha512-plLElXp7pRDd0bNZHw+nMd52vRYjLwQjygaNg7ddJ2uJtTlmnTCjWuPKxVu6//AdaRuME84SvLW91sIkBqGT0g==",
+      "requires": {
+        "mime-db": "1.50.0"
+      }
+    },
+    "node-fetch": {
+      "version": "2.6.7",
+      "resolved": "https://registry.npmjs.org/node-fetch/-/node-fetch-2.6.7.tgz",
+      "integrity": "sha512-ZjMPFEfVx5j+y2yF35Kzx5sF7kDzxuDj6ziH4FFbOp87zKDZNx8yExJIb05OGF4Nlt9IHFIMBkRl41VdvcNdbQ==",
+      "requires": {
+        "whatwg-url": "^5.0.0"
+      }
+    },
+    "once": {
+      "version": "1.4.0",
+      "resolved": "https://registry.npmjs.org/once/-/once-1.4.0.tgz",
+      "integrity": "sha1-WDsap3WWHUsROsF9nFC6753Xa9E=",
+      "requires": {
+        "wrappy": "1"
+      }
+    },
+    "ow": {
+      "version": "0.27.0",
+      "resolved": "https://registry.npmjs.org/ow/-/ow-0.27.0.tgz",
+      "integrity": "sha512-SGnrGUbhn4VaUGdU0EJLMwZWSupPmF46hnTRII7aCLCrqixTAC5eKo8kI4/XXf1eaaI8YEVT+3FeGNJI9himAQ==",
+      "requires": {
+        "@sindresorhus/is": "^4.0.1",
+        "callsites": "^3.1.0",
+        "dot-prop": "^6.0.1",
+        "lodash.isequal": "^4.5.0",
+        "type-fest": "^1.2.1",
+        "vali-date": "^1.0.0"
+      }
+    },
+    "tr46": {
+      "version": "0.0.3",
+      "resolved": "https://registry.npmjs.org/tr46/-/tr46-0.0.3.tgz",
+      "integrity": "sha1-gYT9NH2snNwYWZLzpmIuFLnZq2o="
+    },
+    "ts-mixer": {
+      "version": "6.0.0",
+      "resolved": "https://registry.npmjs.org/ts-mixer/-/ts-mixer-6.0.0.tgz",
+      "integrity": "sha512-nXIb1fvdY5CBSrDIblLn73NW0qRDk5yJ0Sk1qPBF560OdJfQp9jhl+0tzcY09OZ9U+6GpeoI9RjwoIKFIoB9MQ=="
+    },
+    "tslib": {
+      "version": "2.3.1",
+      "resolved": "https://registry.npmjs.org/tslib/-/tslib-2.3.1.tgz",
+      "integrity": "sha512-77EbyPPpMz+FRFRuAFlWMtmgUWGe9UOG2Z25NqCwiIjRhOf5iKGuzSe5P2w1laq+FkRy4p+PCuVkJSGkzTEKVw=="
+    },
+    "tunnel": {
+      "version": "0.0.6",
+      "resolved": "https://registry.npmjs.org/tunnel/-/tunnel-0.0.6.tgz",
+      "integrity": "sha512-1h/Lnq9yajKY2PEbBadPXj3VxsDDu844OnaAo52UVmIzIvwwtBPIuNvkjuzBlTWpfJyUbG3ez0KSBibQkj4ojg=="
+    },
+    "type-fest": {
+      "version": "1.4.0",
+      "resolved": "https://registry.npmjs.org/type-fest/-/type-fest-1.4.0.tgz",
+      "integrity": "sha512-yGSza74xk0UG8k+pLh5oeoYirvIiWo5t0/o3zHHAO2tRDiZcxWP7fywNlXhqb6/r6sWvwi+RsyQMWhVLe4BVuA=="
+    },
+    "universal-user-agent": {
+      "version": "6.0.0",
+      "resolved": "https://registry.npmjs.org/universal-user-agent/-/universal-user-agent-6.0.0.tgz",
+      "integrity": "sha512-isyNax3wXoKaulPDZWHQqbmIx1k2tb9fb3GGDBRxCscfYV2Ch7WxPArBsFEG8s/safwXTT7H4QGhaIkTp9447w=="
+    },
+    "vali-date": {
+      "version": "1.0.0",
+      "resolved": "https://registry.npmjs.org/vali-date/-/vali-date-1.0.0.tgz",
+      "integrity": "sha1-G5BKWWCfsyjvB4E4Qgk09rhnCaY="
+    },
+    "webidl-conversions": {
+      "version": "3.0.1",
+      "resolved": "https://registry.npmjs.org/webidl-conversions/-/webidl-conversions-3.0.1.tgz",
+      "integrity": "sha1-JFNCdeKnvGvnvIZhHMFq4KVlSHE="
+    },
+    "whatwg-url": {
+      "version": "5.0.0",
+      "resolved": "https://registry.npmjs.org/whatwg-url/-/whatwg-url-5.0.0.tgz",
+      "integrity": "sha1-lmRU6HZUYuN2RNNib2dCzotwll0=",
+      "requires": {
+        "tr46": "~0.0.3",
+        "webidl-conversions": "^3.0.0"
+      }
+    },
+    "wrappy": {
+      "version": "1.0.2",
+      "resolved": "https://registry.npmjs.org/wrappy/-/wrappy-1.0.2.tgz",
+      "integrity": "sha1-tSQ9jz7BqjXxNkYFvA0QNuMKtp8="
+    },
+    "ws": {
+      "version": "8.2.3",
+      "resolved": "https://registry.npmjs.org/ws/-/ws-8.2.3.tgz",
+      "integrity": "sha512-wBuoj1BDpC6ZQ1B7DWQBYVLphPWkm8i9Y0/3YdHjHKHiohOJ1ws+3OccDWtH+PoC9DZD5WOTrJvNbWvjS6JWaA==",
+      "requires": {}
+    }
+  }
+}

.github/workflows/scripts/releases/announce-release/package.json

@@ -0,0 +1,16 @@
+{
+  "name": "announce-release",
+  "version": "1.0.0",
+  "description": "",
+  "main": "index.js",
+  "type": "module",
+  "scripts": {
+    "test": "echo \"Error: no test specified\" && exit 1"
+  },
+  "author": "",
+  "license": "ISC",
+  "dependencies": {
+    "@actions/github": "^5.0.0",
+    "discord.js": "^13.2.0"
+  }
+}

.github/workflows/scripts/releases/generate-release-notes/.gitignore

@@ -0,0 +1,2 @@
+node_modules/
+*.md

.github/workflows/scripts/releases/generate-release-notes/index.js

@@ -0,0 +1,64 @@
+import { Octokit } from "@octokit/rest";
+import { throttling } from "@octokit/plugin-throttling";
+import { retry } from "@octokit/plugin-retry";
+Octokit.plugin(throttling);
+Octokit.plugin(retry);
+const octokit = new Octokit({
+  auth: process.env.GITHUB_TOKEN,
+  userAgent: 'PCSX2/pcsx2',
+  log: {
+    debug: () => { },
+    info: () => { },
+    warn: console.warn,
+    error: console.error
+  },
+  throttle: {
+    onRateLimit: (retryAfter, options) => {
+      octokit.log.warn(
+        `Request quota exhausted for request ${options.method} ${options.url}`
+      );
+
+      // Retry twice after hitting a rate limit error, then give up
+      if (options.request.retryCount <= 2) {
+        console.log(`Retrying after ${retryAfter} seconds!`);
+        return true;
+      }
+    },
+    onAbuseLimit: (retryAfter, options) => {
+      // does not retry, only logs a warning
+      octokit.log.warn(
+        `Abuse detected for request ${options.method} ${options.url}`
+      );
+    },
+  }
+});
+
+var args = process.argv.slice(2);
+let commitSha = process.env.COMMIT_SHA;
+
+console.log(`Searching for Commit - ${commitSha}`);
+
+const { data: commit } = await octokit.rest.repos.getCommit({
+  owner: "PCSX2",
+  repo: "pcsx2",
+  ref: commitSha,
+});
+
+const { data: associatedPulls } = await octokit.rest.repos.listPullRequestsAssociatedWithCommit({
+  owner: "PCSX2",
+  repo: "pcsx2",
+  commit_sha: commit.sha,
+});
+
+let releaseNotes = ``;
+
+if (associatedPulls.length === 0) {
+  releaseNotes += `- ${commit.commit.message}\n`;
+} else {
+  for (var j = 0; j < associatedPulls.length; j++) {
+    releaseNotes += `- [${associatedPulls[j].title}](${associatedPulls[j].html_url})\n`;
+  }
+}
+
+import * as fs from 'fs';
+fs.writeFileSync('./release-notes.md', releaseNotes);

.github/workflows/scripts/releases/generate-release-notes/package-lock.json

@@ -0,0 +1,202 @@
+{
+  "name": "generate-release-notes",
+  "version": "1.0.0",
+  "lockfileVersion": 1,
+  "requires": true,
+  "dependencies": {
+    "@octokit/auth-token": {
+      "version": "2.5.0",
+      "resolved": "https://registry.npmjs.org/@octokit/auth-token/-/auth-token-2.5.0.tgz",
+      "integrity": "sha512-r5FVUJCOLl19AxiuZD2VRZ/ORjp/4IN98Of6YJoJOkY75CIBuYfmiNHGrDwXr+aLGG55igl9QrxX3hbiXlLb+g==",
+      "requires": {
+        "@octokit/types": "^6.0.3"
+      }
+    },
+    "@octokit/core": {
+      "version": "3.5.1",
+      "resolved": "https://registry.npmjs.org/@octokit/core/-/core-3.5.1.tgz",
+      "integrity": "sha512-omncwpLVxMP+GLpLPgeGJBF6IWJFjXDS5flY5VbppePYX9XehevbDykRH9PdCdvqt9TS5AOTiDide7h0qrkHjw==",
+      "requires": {
+        "@octokit/auth-token": "^2.4.4",
+        "@octokit/graphql": "^4.5.8",
+        "@octokit/request": "^5.6.0",
+        "@octokit/request-error": "^2.0.5",
+        "@octokit/types": "^6.0.3",
+        "before-after-hook": "^2.2.0",
+        "universal-user-agent": "^6.0.0"
+      }
+    },
+    "@octokit/endpoint": {
+      "version": "6.0.12",
+      "resolved": "https://registry.npmjs.org/@octokit/endpoint/-/endpoint-6.0.12.tgz",
+      "integrity": "sha512-lF3puPwkQWGfkMClXb4k/eUT/nZKQfxinRWJrdZaJO85Dqwo/G0yOC434Jr2ojwafWJMYqFGFa5ms4jJUgujdA==",
+      "requires": {
+        "@octokit/types": "^6.0.3",
+        "is-plain-object": "^5.0.0",
+        "universal-user-agent": "^6.0.0"
+      }
+    },
+    "@octokit/graphql": {
+      "version": "4.8.0",
+      "resolved": "https://registry.npmjs.org/@octokit/graphql/-/graphql-4.8.0.tgz",
+      "integrity": "sha512-0gv+qLSBLKF0z8TKaSKTsS39scVKF9dbMxJpj3U0vC7wjNWFuIpL/z76Qe2fiuCbDRcJSavkXsVtMS6/dtQQsg==",
+      "requires": {
+        "@octokit/request": "^5.6.0",
+        "@octokit/types": "^6.0.3",
+        "universal-user-agent": "^6.0.0"
+      }
+    },
+    "@octokit/openapi-types": {
+      "version": "11.1.0",
+      "resolved": "https://registry.npmjs.org/@octokit/openapi-types/-/openapi-types-11.1.0.tgz",
+      "integrity": "sha512-dWZfYvCCdjZzDYA3lIAMF72Q0jld8xidqCq5Ryw09eBJXZdcM6he0vWBTvw/b5UnGYqexxOyHWgfrsTlUJL3Gw=="
+    },
+    "@octokit/plugin-paginate-rest": {
+      "version": "2.16.9",
+      "resolved": "https://registry.npmjs.org/@octokit/plugin-paginate-rest/-/plugin-paginate-rest-2.16.9.tgz",
+      "integrity": "sha512-gfSCMgz5scFKsR0dW4jaYsDJVt/UwCHp4dF7sHlmSekZvwzvLiOAGZ4MQkEsL5DW9hIk2W+UQkYZMTA1b6Wsqw==",
+      "requires": {
+        "@octokit/types": "^6.33.0"
+      }
+    },
+    "@octokit/plugin-request-log": {
+      "version": "1.0.4",
+      "resolved": "https://registry.npmjs.org/@octokit/plugin-request-log/-/plugin-request-log-1.0.4.tgz",
+      "integrity": "sha512-mLUsMkgP7K/cnFEw07kWqXGF5LKrOkD+lhCrKvPHXWDywAwuDUeDwWBpc69XK3pNX0uKiVt8g5z96PJ6z9xCFA=="
+    },
+    "@octokit/plugin-rest-endpoint-methods": {
+      "version": "5.12.1",
+      "resolved": "https://registry.npmjs.org/@octokit/plugin-rest-endpoint-methods/-/plugin-rest-endpoint-methods-5.12.1.tgz",
+      "integrity": "sha512-0nY3htfl6x9UkPcqv8pm9vOC/bTA7f4IMDWln13neHRdNWQvOQgZ9fRxK7BAc74rye4yVINEFi9Yb9rnGUvosA==",
+      "requires": {
+        "@octokit/types": "^6.33.0",
+        "deprecation": "^2.3.1"
+      }
+    },
+    "@octokit/plugin-retry": {
+      "version": "3.0.9",
+      "resolved": "https://registry.npmjs.org/@octokit/plugin-retry/-/plugin-retry-3.0.9.tgz",
+      "integrity": "sha512-r+fArdP5+TG6l1Rv/C9hVoty6tldw6cE2pRHNGmFPdyfrc696R6JjrQ3d7HdVqGwuzfyrcaLAKD7K8TX8aehUQ==",
+      "requires": {
+        "@octokit/types": "^6.0.3",
+        "bottleneck": "^2.15.3"
+      }
+    },
+    "@octokit/plugin-throttling": {
+      "version": "3.5.2",
+      "resolved": "https://registry.npmjs.org/@octokit/plugin-throttling/-/plugin-throttling-3.5.2.tgz",
+      "integrity": "sha512-Eu7kfJxU8vmHqWGNszWpg+GVp2tnAfax3XQV5CkYPEE69C+KvInJXW9WajgSeW+cxYe0UVdouzCtcreGNuJo7A==",
+      "requires": {
+        "@octokit/types": "^6.0.1",
+        "bottleneck": "^2.15.3"
+      }
+    },
+    "@octokit/request": {
+      "version": "5.6.2",
+      "resolved": "https://registry.npmjs.org/@octokit/request/-/request-5.6.2.tgz",
+      "integrity": "sha512-je66CvSEVf0jCpRISxkUcCa0UkxmFs6eGDRSbfJtAVwbLH5ceqF+YEyC8lj8ystKyZTy8adWr0qmkY52EfOeLA==",
+      "requires": {
+        "@octokit/endpoint": "^6.0.1",
+        "@octokit/request-error": "^2.1.0",
+        "@octokit/types": "^6.16.1",
+        "is-plain-object": "^5.0.0",
+        "node-fetch": "^2.6.1",
+        "universal-user-agent": "^6.0.0"
+      }
+    },
+    "@octokit/request-error": {
+      "version": "2.1.0",
+      "resolved": "https://registry.npmjs.org/@octokit/request-error/-/request-error-2.1.0.tgz",
+      "integrity": "sha512-1VIvgXxs9WHSjicsRwq8PlR2LR2x6DwsJAaFgzdi0JfJoGSO8mYI/cHJQ+9FbN21aa+DrgNLnwObmyeSC8Rmpg==",
+      "requires": {
+        "@octokit/types": "^6.0.3",
+        "deprecation": "^2.0.0",
+        "once": "^1.4.0"
+      }
+    },
+    "@octokit/rest": {
+      "version": "18.12.0",
+      "resolved": "https://registry.npmjs.org/@octokit/rest/-/rest-18.12.0.tgz",
+      "integrity": "sha512-gDPiOHlyGavxr72y0guQEhLsemgVjwRePayJ+FcKc2SJqKUbxbkvf5kAZEWA/MKvsfYlQAMVzNJE3ezQcxMJ2Q==",
+      "requires": {
+        "@octokit/core": "^3.5.1",
+        "@octokit/plugin-paginate-rest": "^2.16.8",
+        "@octokit/plugin-request-log": "^1.0.4",
+        "@octokit/plugin-rest-endpoint-methods": "^5.12.0"
+      }
+    },
+    "@octokit/types": {
+      "version": "6.33.0",
+      "resolved": "https://registry.npmjs.org/@octokit/types/-/types-6.33.0.tgz",
+      "integrity": "sha512-0zffZ048M0UhthyPXQHLz4038Ak46nMWZXkzlXvXB/M/L1jYPBceq4iZj4qjKVrvveaJrrgKdJ9+3yUuITfcCw==",
+      "requires": {
+        "@octokit/openapi-types": "^11.1.0"
+      }
+    },
+    "before-after-hook": {
+      "version": "2.2.2",
+      "resolved": "https://registry.npmjs.org/before-after-hook/-/before-after-hook-2.2.2.tgz",
+      "integrity": "sha512-3pZEU3NT5BFUo/AD5ERPWOgQOCZITni6iavr5AUw5AUwQjMlI0kzu5btnyD39AF0gUEsDPwJT+oY1ORBJijPjQ=="
+    },
+    "bottleneck": {
+      "version": "2.19.5",
+      "resolved": "https://registry.npmjs.org/bottleneck/-/bottleneck-2.19.5.tgz",
+      "integrity": "sha512-VHiNCbI1lKdl44tGrhNfU3lup0Tj/ZBMJB5/2ZbNXRCPuRCO7ed2mgcK4r17y+KB2EfuYuRaVlwNbAeaWGSpbw=="
+    },
+    "deprecation": {
+      "version": "2.3.1",
+      "resolved": "https://registry.npmjs.org/deprecation/-/deprecation-2.3.1.tgz",
+      "integrity": "sha512-xmHIy4F3scKVwMsQ4WnVaS8bHOx0DmVwRywosKhaILI0ywMDWPtBSku2HNxRvF7jtwDRsoEwYQSfbxj8b7RlJQ=="
+    },
+    "is-plain-object": {
+      "version": "5.0.0",
+      "resolved": "https://registry.npmjs.org/is-plain-object/-/is-plain-object-5.0.0.tgz",
+      "integrity": "sha512-VRSzKkbMm5jMDoKLbltAkFQ5Qr7VDiTFGXxYFXXowVj387GeGNOCsOH6Msy00SGZ3Fp84b1Naa1psqgcCIEP5Q=="
+    },
+    "node-fetch": {
+      "version": "2.6.7",
+      "resolved": "https://registry.npmjs.org/node-fetch/-/node-fetch-2.6.7.tgz",
+      "integrity": "sha512-ZjMPFEfVx5j+y2yF35Kzx5sF7kDzxuDj6ziH4FFbOp87zKDZNx8yExJIb05OGF4Nlt9IHFIMBkRl41VdvcNdbQ==",
+      "requires": {
+        "whatwg-url": "^5.0.0"
+      }
+    },
+    "once": {
+      "version": "1.4.0",
+      "resolved": "https://registry.npmjs.org/once/-/once-1.4.0.tgz",
+      "integrity": "sha1-WDsap3WWHUsROsF9nFC6753Xa9E=",
+      "requires": {
+        "wrappy": "1"
+      }
+    },
+    "tr46": {
+      "version": "0.0.3",
+      "resolved": "https://registry.npmjs.org/tr46/-/tr46-0.0.3.tgz",
+      "integrity": "sha1-gYT9NH2snNwYWZLzpmIuFLnZq2o="
+    },
+    "universal-user-agent": {
+      "version": "6.0.0",
+      "resolved": "https://registry.npmjs.org/universal-user-agent/-/universal-user-agent-6.0.0.tgz",
+      "integrity": "sha512-isyNax3wXoKaulPDZWHQqbmIx1k2tb9fb3GGDBRxCscfYV2Ch7WxPArBsFEG8s/safwXTT7H4QGhaIkTp9447w=="
+    },
+    "webidl-conversions": {
+      "version": "3.0.1",
+      "resolved": "https://registry.npmjs.org/webidl-conversions/-/webidl-conversions-3.0.1.tgz",
+      "integrity": "sha1-JFNCdeKnvGvnvIZhHMFq4KVlSHE="
+    },
+    "whatwg-url": {
+      "version": "5.0.0",
+      "resolved": "https://registry.npmjs.org/whatwg-url/-/whatwg-url-5.0.0.tgz",
+      "integrity": "sha1-lmRU6HZUYuN2RNNib2dCzotwll0=",
+      "requires": {
+        "tr46": "~0.0.3",
+        "webidl-conversions": "^3.0.0"
+      }
+    },
+    "wrappy": {
+      "version": "1.0.2",
+      "resolved": "https://registry.npmjs.org/wrappy/-/wrappy-1.0.2.tgz",
+      "integrity": "sha1-tSQ9jz7BqjXxNkYFvA0QNuMKtp8="
+    }
+  }
+}

.github/workflows/scripts/releases/generate-release-notes/package.json

@@ -0,0 +1,17 @@
+{
+  "name": "generate-release-notes",
+  "version": "1.0.0",
+  "description": "",
+  "main": "index.js",
+  "type": "module",
+  "scripts": {
+    "test": "echo \"Error: no test specified\" && exit 1"
+  },
+  "author": "",
+  "license": "ISC",
+  "dependencies": {
+    "@octokit/plugin-retry": "^3.0.9",
+    "@octokit/plugin-throttling": "^3.5.2",
+    "@octokit/rest": "^18.12.0"
+  }
+}

.github/workflows/scripts/releases/upload-release-artifacts/.gitignore

@@ -0,0 +1,2 @@
+node_modules/
+*.md

.github/workflows/scripts/releases/upload-release-artifacts/index.js

@@ -0,0 +1,145 @@
+import { Octokit } from "@octokit/rest";
+import { throttling } from "@octokit/plugin-throttling";
+import { retry } from "@octokit/plugin-retry";
+Octokit.plugin(throttling);
+Octokit.plugin(retry);
+const octokit = new Octokit({
+  auth: process.env.GITHUB_TOKEN,
+  userAgent: 'PCSX2/pcsx2',
+  log: {
+    debug: () => { },
+    info: () => { },
+    warn: console.warn,
+    error: console.error
+  },
+  throttle: {
+    onRateLimit: (retryAfter, options) => {
+      octokit.log.warn(
+        `Request quota exhausted for request ${options.method} ${options.url}`
+      );
+
+      // Retry twice after hitting a rate limit error, then give up
+      if (options.request.retryCount <= 2) {
+        console.log(`Retrying after ${retryAfter} seconds!`);
+        return true;
+      }
+    },
+    onAbuseLimit: (retryAfter, options) => {
+      // does not retry, only logs a warning
+      octokit.log.warn(
+        `Abuse detected for request ${options.method} ${options.url}`
+      );
+    },
+  }
+});
+
+let assetDir = process.env.ASSET_DIR;
+let tagToSearchFor = process.env.TAG_TO_SEARCH_FOR.split("refs/tags/")[1];
+
+console.log(`Searching in - ${assetDir}`);
+console.log(`Searching for tag - ${tagToSearchFor}`);
+
+const { data: recentReleases } = await octokit.rest.repos.listReleases({
+  owner: "PCSX2",
+  repo: "pcsx2",
+  per_page: 100
+});
+
+let release = undefined;
+for (var i = 0; i < recentReleases.length; i++) {
+  if (recentReleases[i].tag_name == tagToSearchFor) {
+    release = recentReleases[i];
+    break;
+  }
+}
+
+if (release == undefined) {
+  console.log(`Unable to find release with tag - ${tagToSearchFor}`);
+  process.exit(1);
+}
+
+// Upload any assets we need to, don't upload assets that are already there!
+const { data: releaseAssetsPre } = await octokit.rest.repos.listReleaseAssets({
+  owner: "PCSX2",
+  repo: "pcsx2",
+  release_id: release.id,
+  per_page: 100
+});
+
+import glob from 'glob';
+import * as fs from 'fs';
+import * as path from 'path';
+glob(assetDir + `/**/*${process.env.ASSET_EXTENSION}`, {}, async (err, files) => {
+  for (var i = 0; i < files.length; i++) {
+    let foundDuplicate = false;
+    for (var j = 0; j < releaseAssetsPre.length; j++) {
+      let existingAsset = releaseAssetsPre[j];
+      if (existingAsset.name == `pcsx2-${release.tag_name}-${path.basename(files[i])}`) {
+        foundDuplicate = true;
+        break;
+      }
+    }
+    if (foundDuplicate) {
+      continue;
+    }
+
+    var assetBytes = fs.readFileSync(files[i], null);
+    const { data: uploadAsset } = await octokit.rest.repos.uploadReleaseAsset({
+      owner: "PCSX2",
+      repo: "pcsx2",
+      release_id: release.id,
+      name: `pcsx2-${release.tag_name}-${path.basename(files[i])}`,
+      data: assetBytes,
+    });
+  }
+});
+
+// Ideally there would be a webhook event for when an artifact is added to a draft release
+// unfortunately, such a thing does not exist yet.  Therefore, we have to wait a bit
+// for the API to become consistent
+// TODO - future work - we could check previous draft releases to become eventually consistent as well
+// - draft releases should only be a temporary state, so anything that remains a draft had a problem
+await new Promise(resolve => setTimeout(resolve, 10 * 1000));
+
+// Poll the release, and check to see if it's ready to be published
+const { data: releaseAssetsPost } = await octokit.rest.repos.listReleaseAssets({
+  owner: "PCSX2",
+  repo: "pcsx2",
+  release_id: release.id,
+  per_page: 100
+});
+
+// Expected Assets, if we have all of them, we will publish it
+let expectedAssets = {
+  "windows-32bit-sse4": false,
+  "windows-32bit-avx2": false,
+  "windows-64bit-sse4": false,
+  "windows-64bit-avx2": false,
+  "linux-appimage-32bit": false,
+  "linux-appimage-64bit": false
+}
+
+for (var i = 0; i < releaseAssetsPost.length; i++) {
+  let asset = releaseAssetsPost[i];
+  if (asset.name.includes("symbols")) {
+    continue;
+  }
+  for (var j = 0; j < Object.keys(expectedAssets).length; j++) {
+    let expectedNamePrefix = Object.keys(expectedAssets)[j];
+    if (asset.name.toLowerCase().includes(expectedNamePrefix)) {
+      expectedAssets[expectedNamePrefix] = true;
+      break;
+    }
+  }
+}
+
+console.log(expectedAssets);
+
+if (Object.values(expectedAssets).every(Boolean)) {
+  await octokit.rest.repos.updateRelease({
+    owner: "PCSX2",
+    repo: "pcsx2",
+    release_id: release.id,
+    draft: false
+  });
+}

.github/workflows/scripts/releases/upload-release-artifacts/package-lock.json

@@ -0,0 +1,559 @@
+{
+  "name": "upload-release-artifacts",
+  "version": "1.0.0",
+  "lockfileVersion": 2,
+  "requires": true,
+  "packages": {
+    "": {
+      "version": "1.0.0",
+      "license": "ISC",
+      "dependencies": {
+        "@octokit/plugin-retry": "^3.0.9",
+        "@octokit/plugin-throttling": "^3.5.2",
+        "@octokit/rest": "^18.12.0",
+        "glob": "^7.2.0"
+      }
+    },
+    "node_modules/@octokit/auth-token": {
+      "version": "2.5.0",
+      "resolved": "https://registry.npmjs.org/@octokit/auth-token/-/auth-token-2.5.0.tgz",
+      "integrity": "sha512-r5FVUJCOLl19AxiuZD2VRZ/ORjp/4IN98Of6YJoJOkY75CIBuYfmiNHGrDwXr+aLGG55igl9QrxX3hbiXlLb+g==",
+      "dependencies": {
+        "@octokit/types": "^6.0.3"
+      }
+    },
+    "node_modules/@octokit/core": {
+      "version": "3.5.1",
+      "resolved": "https://registry.npmjs.org/@octokit/core/-/core-3.5.1.tgz",
+      "integrity": "sha512-omncwpLVxMP+GLpLPgeGJBF6IWJFjXDS5flY5VbppePYX9XehevbDykRH9PdCdvqt9TS5AOTiDide7h0qrkHjw==",
+      "dependencies": {
+        "@octokit/auth-token": "^2.4.4",
+        "@octokit/graphql": "^4.5.8",
+        "@octokit/request": "^5.6.0",
+        "@octokit/request-error": "^2.0.5",
+        "@octokit/types": "^6.0.3",
+        "before-after-hook": "^2.2.0",
+        "universal-user-agent": "^6.0.0"
+      }
+    },
+    "node_modules/@octokit/endpoint": {
+      "version": "6.0.12",
+      "resolved": "https://registry.npmjs.org/@octokit/endpoint/-/endpoint-6.0.12.tgz",
+      "integrity": "sha512-lF3puPwkQWGfkMClXb4k/eUT/nZKQfxinRWJrdZaJO85Dqwo/G0yOC434Jr2ojwafWJMYqFGFa5ms4jJUgujdA==",
+      "dependencies": {
+        "@octokit/types": "^6.0.3",
+        "is-plain-object": "^5.0.0",
+        "universal-user-agent": "^6.0.0"
+      }
+    },
+    "node_modules/@octokit/graphql": {
+      "version": "4.8.0",
+      "resolved": "https://registry.npmjs.org/@octokit/graphql/-/graphql-4.8.0.tgz",
+      "integrity": "sha512-0gv+qLSBLKF0z8TKaSKTsS39scVKF9dbMxJpj3U0vC7wjNWFuIpL/z76Qe2fiuCbDRcJSavkXsVtMS6/dtQQsg==",
+      "dependencies": {
+        "@octokit/request": "^5.6.0",
+        "@octokit/types": "^6.0.3",
+        "universal-user-agent": "^6.0.0"
+      }
+    },
+    "node_modules/@octokit/openapi-types": {
+      "version": "11.1.0",
+      "resolved": "https://registry.npmjs.org/@octokit/openapi-types/-/openapi-types-11.1.0.tgz",
+      "integrity": "sha512-dWZfYvCCdjZzDYA3lIAMF72Q0jld8xidqCq5Ryw09eBJXZdcM6he0vWBTvw/b5UnGYqexxOyHWgfrsTlUJL3Gw=="
+    },
+    "node_modules/@octokit/plugin-paginate-rest": {
+      "version": "2.16.9",
+      "resolved": "https://registry.npmjs.org/@octokit/plugin-paginate-rest/-/plugin-paginate-rest-2.16.9.tgz",
+      "integrity": "sha512-gfSCMgz5scFKsR0dW4jaYsDJVt/UwCHp4dF7sHlmSekZvwzvLiOAGZ4MQkEsL5DW9hIk2W+UQkYZMTA1b6Wsqw==",
+      "dependencies": {
+        "@octokit/types": "^6.33.0"
+      }
+    },
+    "node_modules/@octokit/plugin-request-log": {
+      "version": "1.0.4",
+      "resolved": "https://registry.npmjs.org/@octokit/plugin-request-log/-/plugin-request-log-1.0.4.tgz",
+      "integrity": "sha512-mLUsMkgP7K/cnFEw07kWqXGF5LKrOkD+lhCrKvPHXWDywAwuDUeDwWBpc69XK3pNX0uKiVt8g5z96PJ6z9xCFA=="
+    },
+    "node_modules/@octokit/plugin-rest-endpoint-methods": {
+      "version": "5.12.1",
+      "resolved": "https://registry.npmjs.org/@octokit/plugin-rest-endpoint-methods/-/plugin-rest-endpoint-methods-5.12.1.tgz",
+      "integrity": "sha512-0nY3htfl6x9UkPcqv8pm9vOC/bTA7f4IMDWln13neHRdNWQvOQgZ9fRxK7BAc74rye4yVINEFi9Yb9rnGUvosA==",
+      "dependencies": {
+        "@octokit/types": "^6.33.0",
+        "deprecation": "^2.3.1"
+      }
+    },
+    "node_modules/@octokit/plugin-retry": {
+      "version": "3.0.9",
+      "resolved": "https://registry.npmjs.org/@octokit/plugin-retry/-/plugin-retry-3.0.9.tgz",
+      "integrity": "sha512-r+fArdP5+TG6l1Rv/C9hVoty6tldw6cE2pRHNGmFPdyfrc696R6JjrQ3d7HdVqGwuzfyrcaLAKD7K8TX8aehUQ==",
+      "dependencies": {
+        "@octokit/types": "^6.0.3",
+        "bottleneck": "^2.15.3"
+      }
+    },
+    "node_modules/@octokit/plugin-throttling": {
+      "version": "3.5.2",
+      "resolved": "https://registry.npmjs.org/@octokit/plugin-throttling/-/plugin-throttling-3.5.2.tgz",
+      "integrity": "sha512-Eu7kfJxU8vmHqWGNszWpg+GVp2tnAfax3XQV5CkYPEE69C+KvInJXW9WajgSeW+cxYe0UVdouzCtcreGNuJo7A==",
+      "dependencies": {
+        "@octokit/types": "^6.0.1",
+        "bottleneck": "^2.15.3"
+      }
+    },
+    "node_modules/@octokit/request": {
+      "version": "5.6.2",
+      "resolved": "https://registry.npmjs.org/@octokit/request/-/request-5.6.2.tgz",
+      "integrity": "sha512-je66CvSEVf0jCpRISxkUcCa0UkxmFs6eGDRSbfJtAVwbLH5ceqF+YEyC8lj8ystKyZTy8adWr0qmkY52EfOeLA==",
+      "dependencies": {
+        "@octokit/endpoint": "^6.0.1",
+        "@octokit/request-error": "^2.1.0",
+        "@octokit/types": "^6.16.1",
+        "is-plain-object": "^5.0.0",
+        "node-fetch": "^2.6.1",
+        "universal-user-agent": "^6.0.0"
+      }
+    },
+    "node_modules/@octokit/request-error": {
+      "version": "2.1.0",
+      "resolved": "https://registry.npmjs.org/@octokit/request-error/-/request-error-2.1.0.tgz",
+      "integrity": "sha512-1VIvgXxs9WHSjicsRwq8PlR2LR2x6DwsJAaFgzdi0JfJoGSO8mYI/cHJQ+9FbN21aa+DrgNLnwObmyeSC8Rmpg==",
+      "dependencies": {
+        "@octokit/types": "^6.0.3",
+        "deprecation": "^2.0.0",
+        "once": "^1.4.0"
+      }
+    },
+    "node_modules/@octokit/rest": {
+      "version": "18.12.0",
+      "resolved": "https://registry.npmjs.org/@octokit/rest/-/rest-18.12.0.tgz",
+      "integrity": "sha512-gDPiOHlyGavxr72y0guQEhLsemgVjwRePayJ+FcKc2SJqKUbxbkvf5kAZEWA/MKvsfYlQAMVzNJE3ezQcxMJ2Q==",
+      "dependencies": {
+        "@octokit/core": "^3.5.1",
+        "@octokit/plugin-paginate-rest": "^2.16.8",
+        "@octokit/plugin-request-log": "^1.0.4",
+        "@octokit/plugin-rest-endpoint-methods": "^5.12.0"
+      }
+    },
+    "node_modules/@octokit/types": {
+      "version": "6.33.0",
+      "resolved": "https://registry.npmjs.org/@octokit/types/-/types-6.33.0.tgz",
+      "integrity": "sha512-0zffZ048M0UhthyPXQHLz4038Ak46nMWZXkzlXvXB/M/L1jYPBceq4iZj4qjKVrvveaJrrgKdJ9+3yUuITfcCw==",
+      "dependencies": {
+        "@octokit/openapi-types": "^11.1.0"
+      }
+    },
+    "node_modules/balanced-match": {
+      "version": "1.0.2",
+      "resolved": "https://registry.npmjs.org/balanced-match/-/balanced-match-1.0.2.tgz",
+      "integrity": "sha512-3oSeUO0TMV67hN1AmbXsK4yaqU7tjiHlbxRDZOpH0KW9+CeX4bRAaX0Anxt0tx2MrpRpWwQaPwIlISEJhYU5Pw=="
+    },
+    "node_modules/before-after-hook": {
+      "version": "2.2.2",
+      "resolved": "https://registry.npmjs.org/before-after-hook/-/before-after-hook-2.2.2.tgz",
+      "integrity": "sha512-3pZEU3NT5BFUo/AD5ERPWOgQOCZITni6iavr5AUw5AUwQjMlI0kzu5btnyD39AF0gUEsDPwJT+oY1ORBJijPjQ=="
+    },
+    "node_modules/bottleneck": {
+      "version": "2.19.5",
+      "resolved": "https://registry.npmjs.org/bottleneck/-/bottleneck-2.19.5.tgz",
+      "integrity": "sha512-VHiNCbI1lKdl44tGrhNfU3lup0Tj/ZBMJB5/2ZbNXRCPuRCO7ed2mgcK4r17y+KB2EfuYuRaVlwNbAeaWGSpbw=="
+    },
+    "node_modules/brace-expansion": {
+      "version": "1.1.11",
+      "resolved": "https://registry.npmjs.org/brace-expansion/-/brace-expansion-1.1.11.tgz",
+      "integrity": "sha512-iCuPHDFgrHX7H2vEI/5xpz07zSHB00TpugqhmYtVmMO6518mCuRMoOYFldEBl0g187ufozdaHgWKcYFb61qGiA==",
+      "dependencies": {
+        "balanced-match": "^1.0.0",
+        "concat-map": "0.0.1"
+      }
+    },
+    "node_modules/concat-map": {
+      "version": "0.0.1",
+      "resolved": "https://registry.npmjs.org/concat-map/-/concat-map-0.0.1.tgz",
+      "integrity": "sha1-2Klr13/Wjfd5OnMDajug1UBdR3s="
+    },
+    "node_modules/deprecation": {
+      "version": "2.3.1",
+      "resolved": "https://registry.npmjs.org/deprecation/-/deprecation-2.3.1.tgz",
+      "integrity": "sha512-xmHIy4F3scKVwMsQ4WnVaS8bHOx0DmVwRywosKhaILI0ywMDWPtBSku2HNxRvF7jtwDRsoEwYQSfbxj8b7RlJQ=="
+    },
+    "node_modules/fs.realpath": {
+      "version": "1.0.0",
+      "resolved": "https://registry.npmjs.org/fs.realpath/-/fs.realpath-1.0.0.tgz",
+      "integrity": "sha1-FQStJSMVjKpA20onh8sBQRmU6k8="
+    },
+    "node_modules/glob": {
+      "version": "7.2.0",
+      "resolved": "https://registry.npmjs.org/glob/-/glob-7.2.0.tgz",
+      "integrity": "sha512-lmLf6gtyrPq8tTjSmrO94wBeQbFR3HbLHbuyD69wuyQkImp2hWqMGB47OX65FBkPffO641IP9jWa1z4ivqG26Q==",
+      "dependencies": {
+        "fs.realpath": "^1.0.0",
+        "inflight": "^1.0.4",
+        "inherits": "2",
+        "minimatch": "^3.0.4",
+        "once": "^1.3.0",
+        "path-is-absolute": "^1.0.0"
+      },
+      "engines": {
+        "node": "*"
+      }
+    },
+    "node_modules/inflight": {
+      "version": "1.0.6",
+      "resolved": "https://registry.npmjs.org/inflight/-/inflight-1.0.6.tgz",
+      "integrity": "sha1-Sb1jMdfQLQwJvJEKEHW6gWW1bfk=",
+      "dependencies": {
+        "once": "^1.3.0",
+        "wrappy": "1"
+      }
+    },
+    "node_modules/inherits": {
+      "version": "2.0.4",
+      "resolved": "https://registry.npmjs.org/inherits/-/inherits-2.0.4.tgz",
+      "integrity": "sha512-k/vGaX4/Yla3WzyMCvTQOXYeIHvqOKtnqBduzTHpzpQZzAskKMhZ2K+EnBiSM9zGSoIFeMpXKxa4dYeZIQqewQ=="
+    },
+    "node_modules/is-plain-object": {
+      "version": "5.0.0",
+      "resolved": "https://registry.npmjs.org/is-plain-object/-/is-plain-object-5.0.0.tgz",
+      "integrity": "sha512-VRSzKkbMm5jMDoKLbltAkFQ5Qr7VDiTFGXxYFXXowVj387GeGNOCsOH6Msy00SGZ3Fp84b1Naa1psqgcCIEP5Q==",
+      "engines": {
+        "node": ">=0.10.0"
+      }
+    },
+    "node_modules/minimatch": {
+      "version": "3.0.4",
+      "resolved": "https://registry.npmjs.org/minimatch/-/minimatch-3.0.4.tgz",
+      "integrity": "sha512-yJHVQEhyqPLUTgt9B83PXu6W3rx4MvvHvSUvToogpwoGDOUQ+yDrR0HRot+yOCdCO7u4hX3pWft6kWBBcqh0UA==",
+      "dependencies": {
+        "brace-expansion": "^1.1.7"
+      },
+      "engines": {
+        "node": "*"
+      }
+    },
+    "node_modules/node-fetch": {
+      "version": "2.6.7",
+      "resolved": "https://registry.npmjs.org/node-fetch/-/node-fetch-2.6.7.tgz",
+      "integrity": "sha512-ZjMPFEfVx5j+y2yF35Kzx5sF7kDzxuDj6ziH4FFbOp87zKDZNx8yExJIb05OGF4Nlt9IHFIMBkRl41VdvcNdbQ==",
+      "dependencies": {
+        "whatwg-url": "^5.0.0"
+      },
+      "engines": {
+        "node": "4.x || >=6.0.0"
+      },
+      "peerDependencies": {
+        "encoding": "^0.1.0"
+      },
+      "peerDependenciesMeta": {
+        "encoding": {
+          "optional": true
+        }
+      }
+    },
+    "node_modules/once": {
+      "version": "1.4.0",
+      "resolved": "https://registry.npmjs.org/once/-/once-1.4.0.tgz",
+      "integrity": "sha1-WDsap3WWHUsROsF9nFC6753Xa9E=",
+      "dependencies": {
+        "wrappy": "1"
+      }
+    },
+    "node_modules/path-is-absolute": {
+      "version": "1.0.1",
+      "resolved": "https://registry.npmjs.org/path-is-absolute/-/path-is-absolute-1.0.1.tgz",
+      "integrity": "sha1-F0uSaHNVNP+8es5r9TpanhtcX18=",
+      "engines": {
+        "node": ">=0.10.0"
+      }
+    },
+    "node_modules/tr46": {
+      "version": "0.0.3",
+      "resolved": "https://registry.npmjs.org/tr46/-/tr46-0.0.3.tgz",
+      "integrity": "sha1-gYT9NH2snNwYWZLzpmIuFLnZq2o="
+    },
+    "node_modules/universal-user-agent": {
+      "version": "6.0.0",
+      "resolved": "https://registry.npmjs.org/universal-user-agent/-/universal-user-agent-6.0.0.tgz",
+      "integrity": "sha512-isyNax3wXoKaulPDZWHQqbmIx1k2tb9fb3GGDBRxCscfYV2Ch7WxPArBsFEG8s/safwXTT7H4QGhaIkTp9447w=="
+    },
+    "node_modules/webidl-conversions": {
+      "version": "3.0.1",
+      "resolved": "https://registry.npmjs.org/webidl-conversions/-/webidl-conversions-3.0.1.tgz",
+      "integrity": "sha1-JFNCdeKnvGvnvIZhHMFq4KVlSHE="
+    },
+    "node_modules/whatwg-url": {
+      "version": "5.0.0",
+      "resolved": "https://registry.npmjs.org/whatwg-url/-/whatwg-url-5.0.0.tgz",
+      "integrity": "sha1-lmRU6HZUYuN2RNNib2dCzotwll0=",
+      "dependencies": {
+        "tr46": "~0.0.3",
+        "webidl-conversions": "^3.0.0"
+      }
+    },
+    "node_modules/wrappy": {
+      "version": "1.0.2",
+      "resolved": "https://registry.npmjs.org/wrappy/-/wrappy-1.0.2.tgz",
+      "integrity": "sha1-tSQ9jz7BqjXxNkYFvA0QNuMKtp8="
+    }
+  },
+  "dependencies": {
+    "@octokit/auth-token": {
+      "version": "2.5.0",
+      "resolved": "https://registry.npmjs.org/@octokit/auth-token/-/auth-token-2.5.0.tgz",
+      "integrity": "sha512-r5FVUJCOLl19AxiuZD2VRZ/ORjp/4IN98Of6YJoJOkY75CIBuYfmiNHGrDwXr+aLGG55igl9QrxX3hbiXlLb+g==",
+      "requires": {
+        "@octokit/types": "^6.0.3"
+      }
+    },
+    "@octokit/core": {
+      "version": "3.5.1",
+      "resolved": "https://registry.npmjs.org/@octokit/core/-/core-3.5.1.tgz",
+      "integrity": "sha512-omncwpLVxMP+GLpLPgeGJBF6IWJFjXDS5flY5VbppePYX9XehevbDykRH9PdCdvqt9TS5AOTiDide7h0qrkHjw==",
+      "requires": {
+        "@octokit/auth-token": "^2.4.4",
+        "@octokit/graphql": "^4.5.8",
+        "@octokit/request": "^5.6.0",
+        "@octokit/request-error": "^2.0.5",
+        "@octokit/types": "^6.0.3",
+        "before-after-hook": "^2.2.0",
+        "universal-user-agent": "^6.0.0"
+      }
+    },
+    "@octokit/endpoint": {
+      "version": "6.0.12",
+      "resolved": "https://registry.npmjs.org/@octokit/endpoint/-/endpoint-6.0.12.tgz",
+      "integrity": "sha512-lF3puPwkQWGfkMClXb4k/eUT/nZKQfxinRWJrdZaJO85Dqwo/G0yOC434Jr2ojwafWJMYqFGFa5ms4jJUgujdA==",
+      "requires": {
+        "@octokit/types": "^6.0.3",
+        "is-plain-object": "^5.0.0",
+        "universal-user-agent": "^6.0.0"
+      }
+    },
+    "@octokit/graphql": {
+      "version": "4.8.0",
+      "resolved": "https://registry.npmjs.org/@octokit/graphql/-/graphql-4.8.0.tgz",
+      "integrity": "sha512-0gv+qLSBLKF0z8TKaSKTsS39scVKF9dbMxJpj3U0vC7wjNWFuIpL/z76Qe2fiuCbDRcJSavkXsVtMS6/dtQQsg==",
+      "requires": {
+        "@octokit/request": "^5.6.0",
+        "@octokit/types": "^6.0.3",
+        "universal-user-agent": "^6.0.0"
+      }
+    },
+    "@octokit/openapi-types": {
+      "version": "11.1.0",
+      "resolved": "https://registry.npmjs.org/@octokit/openapi-types/-/openapi-types-11.1.0.tgz",
+      "integrity": "sha512-dWZfYvCCdjZzDYA3lIAMF72Q0jld8xidqCq5Ryw09eBJXZdcM6he0vWBTvw/b5UnGYqexxOyHWgfrsTlUJL3Gw=="
+    },
+    "@octokit/plugin-paginate-rest": {
+      "version": "2.16.9",
+      "resolved": "https://registry.npmjs.org/@octokit/plugin-paginate-rest/-/plugin-paginate-rest-2.16.9.tgz",
+      "integrity": "sha512-gfSCMgz5scFKsR0dW4jaYsDJVt/UwCHp4dF7sHlmSekZvwzvLiOAGZ4MQkEsL5DW9hIk2W+UQkYZMTA1b6Wsqw==",
+      "requires": {
+        "@octokit/types": "^6.33.0"
+      }
+    },
+    "@octokit/plugin-request-log": {
+      "version": "1.0.4",
+      "resolved": "https://registry.npmjs.org/@octokit/plugin-request-log/-/plugin-request-log-1.0.4.tgz",
+      "integrity": "sha512-mLUsMkgP7K/cnFEw07kWqXGF5LKrOkD+lhCrKvPHXWDywAwuDUeDwWBpc69XK3pNX0uKiVt8g5z96PJ6z9xCFA=="
+    },
+    "@octokit/plugin-rest-endpoint-methods": {
+      "version": "5.12.1",
+      "resolved": "https://registry.npmjs.org/@octokit/plugin-rest-endpoint-methods/-/plugin-rest-endpoint-methods-5.12.1.tgz",
+      "integrity": "sha512-0nY3htfl6x9UkPcqv8pm9vOC/bTA7f4IMDWln13neHRdNWQvOQgZ9fRxK7BAc74rye4yVINEFi9Yb9rnGUvosA==",
+      "requires": {
+        "@octokit/types": "^6.33.0",
+        "deprecation": "^2.3.1"
+      }
+    },
+    "@octokit/plugin-retry": {
+      "version": "3.0.9",
+      "resolved": "https://registry.npmjs.org/@octokit/plugin-retry/-/plugin-retry-3.0.9.tgz",
+      "integrity": "sha512-r+fArdP5+TG6l1Rv/C9hVoty6tldw6cE2pRHNGmFPdyfrc696R6JjrQ3d7HdVqGwuzfyrcaLAKD7K8TX8aehUQ==",
+      "requires": {
+        "@octokit/types": "^6.0.3",
+        "bottleneck": "^2.15.3"
+      }
+    },
+    "@octokit/plugin-throttling": {
+      "version": "3.5.2",
+      "resolved": "https://registry.npmjs.org/@octokit/plugin-throttling/-/plugin-throttling-3.5.2.tgz",
+      "integrity": "sha512-Eu7kfJxU8vmHqWGNszWpg+GVp2tnAfax3XQV5CkYPEE69C+KvInJXW9WajgSeW+cxYe0UVdouzCtcreGNuJo7A==",
+      "requires": {
+        "@octokit/types": "^6.0.1",
+        "bottleneck": "^2.15.3"
+      }
+    },
+    "@octokit/request": {
+      "version": "5.6.2",
+      "resolved": "https://registry.npmjs.org/@octokit/request/-/request-5.6.2.tgz",
+      "integrity": "sha512-je66CvSEVf0jCpRISxkUcCa0UkxmFs6eGDRSbfJtAVwbLH5ceqF+YEyC8lj8ystKyZTy8adWr0qmkY52EfOeLA==",
+      "requires": {
+        "@octokit/endpoint": "^6.0.1",
+        "@octokit/request-error": "^2.1.0",
+        "@octokit/types": "^6.16.1",
+        "is-plain-object": "^5.0.0",
+        "node-fetch": "^2.6.1",
+        "universal-user-agent": "^6.0.0"
+      }
+    },
+    "@octokit/request-error": {
+      "version": "2.1.0",
+      "resolved": "https://registry.npmjs.org/@octokit/request-error/-/request-error-2.1.0.tgz",
+      "integrity": "sha512-1VIvgXxs9WHSjicsRwq8PlR2LR2x6DwsJAaFgzdi0JfJoGSO8mYI/cHJQ+9FbN21aa+DrgNLnwObmyeSC8Rmpg==",
+      "requires": {
+        "@octokit/types": "^6.0.3",
+        "deprecation": "^2.0.0",
+        "once": "^1.4.0"
+      }
+    },
+    "@octokit/rest": {
+      "version": "18.12.0",
+      "resolved": "https://registry.npmjs.org/@octokit/rest/-/rest-18.12.0.tgz",
+      "integrity": "sha512-gDPiOHlyGavxr72y0guQEhLsemgVjwRePayJ+FcKc2SJqKUbxbkvf5kAZEWA/MKvsfYlQAMVzNJE3ezQcxMJ2Q==",
+      "requires": {
+        "@octokit/core": "^3.5.1",
+        "@octokit/plugin-paginate-rest": "^2.16.8",
+        "@octokit/plugin-request-log": "^1.0.4",
+        "@octokit/plugin-rest-endpoint-methods": "^5.12.0"
+      }
+    },
+    "@octokit/types": {
+      "version": "6.33.0",
+      "resolved": "https://registry.npmjs.org/@octokit/types/-/types-6.33.0.tgz",
+      "integrity": "sha512-0zffZ048M0UhthyPXQHLz4038Ak46nMWZXkzlXvXB/M/L1jYPBceq4iZj4qjKVrvveaJrrgKdJ9+3yUuITfcCw==",
+      "requires": {
+        "@octokit/openapi-types": "^11.1.0"
+      }
+    },
+    "balanced-match": {
+      "version": "1.0.2",
+      "resolved": "https://registry.npmjs.org/balanced-match/-/balanced-match-1.0.2.tgz",
+      "integrity": "sha512-3oSeUO0TMV67hN1AmbXsK4yaqU7tjiHlbxRDZOpH0KW9+CeX4bRAaX0Anxt0tx2MrpRpWwQaPwIlISEJhYU5Pw=="
+    },
+    "before-after-hook": {
+      "version": "2.2.2",
+      "resolved": "https://registry.npmjs.org/before-after-hook/-/before-after-hook-2.2.2.tgz",
+      "integrity": "sha512-3pZEU3NT5BFUo/AD5ERPWOgQOCZITni6iavr5AUw5AUwQjMlI0kzu5btnyD39AF0gUEsDPwJT+oY1ORBJijPjQ=="
+    },
+    "bottleneck": {
+      "version": "2.19.5",
+      "resolved": "https://registry.npmjs.org/bottleneck/-/bottleneck-2.19.5.tgz",
+      "integrity": "sha512-VHiNCbI1lKdl44tGrhNfU3lup0Tj/ZBMJB5/2ZbNXRCPuRCO7ed2mgcK4r17y+KB2EfuYuRaVlwNbAeaWGSpbw=="
+    },
+    "brace-expansion": {
+      "version": "1.1.11",
+      "resolved": "https://registry.npmjs.org/brace-expansion/-/brace-expansion-1.1.11.tgz",
+      "integrity": "sha512-iCuPHDFgrHX7H2vEI/5xpz07zSHB00TpugqhmYtVmMO6518mCuRMoOYFldEBl0g187ufozdaHgWKcYFb61qGiA==",
+      "requires": {
+        "balanced-match": "^1.0.0",
+        "concat-map": "0.0.1"
+      }
+    },
+    "concat-map": {
+      "version": "0.0.1",
+      "resolved": "https://registry.npmjs.org/concat-map/-/concat-map-0.0.1.tgz",
+      "integrity": "sha1-2Klr13/Wjfd5OnMDajug1UBdR3s="
+    },
+    "deprecation": {
+      "version": "2.3.1",
+      "resolved": "https://registry.npmjs.org/deprecation/-/deprecation-2.3.1.tgz",
+      "integrity": "sha512-xmHIy4F3scKVwMsQ4WnVaS8bHOx0DmVwRywosKhaILI0ywMDWPtBSku2HNxRvF7jtwDRsoEwYQSfbxj8b7RlJQ=="
+    },
+    "fs.realpath": {
+      "version": "1.0.0",
+      "resolved": "https://registry.npmjs.org/fs.realpath/-/fs.realpath-1.0.0.tgz",
+      "integrity": "sha1-FQStJSMVjKpA20onh8sBQRmU6k8="
+    },
+    "glob": {
+      "version": "7.2.0",
+      "resolved": "https://registry.npmjs.org/glob/-/glob-7.2.0.tgz",
+      "integrity": "sha512-lmLf6gtyrPq8tTjSmrO94wBeQbFR3HbLHbuyD69wuyQkImp2hWqMGB47OX65FBkPffO641IP9jWa1z4ivqG26Q==",
+      "requires": {
+        "fs.realpath": "^1.0.0",
+        "inflight": "^1.0.4",
+        "inherits": "2",
+        "minimatch": "^3.0.4",
+        "once": "^1.3.0",
+        "path-is-absolute": "^1.0.0"
+      }
+    },
+    "inflight": {
+      "version": "1.0.6",
+      "resolved": "https://registry.npmjs.org/inflight/-/inflight-1.0.6.tgz",
+      "integrity": "sha1-Sb1jMdfQLQwJvJEKEHW6gWW1bfk=",
+      "requires": {
+        "once": "^1.3.0",
+        "wrappy": "1"
+      }
+    },
+    "inherits": {
+      "version": "2.0.4",
+      "resolved": "https://registry.npmjs.org/inherits/-/inherits-2.0.4.tgz",
+      "integrity": "sha512-k/vGaX4/Yla3WzyMCvTQOXYeIHvqOKtnqBduzTHpzpQZzAskKMhZ2K+EnBiSM9zGSoIFeMpXKxa4dYeZIQqewQ=="
+    },
+    "is-plain-object": {
+      "version": "5.0.0",
+      "resolved": "https://registry.npmjs.org/is-plain-object/-/is-plain-object-5.0.0.tgz",
+      "integrity": "sha512-VRSzKkbMm5jMDoKLbltAkFQ5Qr7VDiTFGXxYFXXowVj387GeGNOCsOH6Msy00SGZ3Fp84b1Naa1psqgcCIEP5Q=="
+    },
+    "minimatch": {
+      "version": "3.0.4",
+      "resolved": "https://registry.npmjs.org/minimatch/-/minimatch-3.0.4.tgz",
+      "integrity": "sha512-yJHVQEhyqPLUTgt9B83PXu6W3rx4MvvHvSUvToogpwoGDOUQ+yDrR0HRot+yOCdCO7u4hX3pWft6kWBBcqh0UA==",
+      "requires": {
+        "brace-expansion": "^1.1.7"
+      }
+    },
+    "node-fetch": {
+      "version": "2.6.7",
+      "resolved": "https://registry.npmjs.org/node-fetch/-/node-fetch-2.6.7.tgz",
+      "integrity": "sha512-ZjMPFEfVx5j+y2yF35Kzx5sF7kDzxuDj6ziH4FFbOp87zKDZNx8yExJIb05OGF4Nlt9IHFIMBkRl41VdvcNdbQ==",
+      "requires": {
+        "whatwg-url": "^5.0.0"
+      }
+    },
+    "once": {
+      "version": "1.4.0",
+      "resolved": "https://registry.npmjs.org/once/-/once-1.4.0.tgz",
+      "integrity": "sha1-WDsap3WWHUsROsF9nFC6753Xa9E=",
+      "requires": {
+        "wrappy": "1"
+      }
+    },
+    "path-is-absolute": {
+      "version": "1.0.1",
+      "resolved": "https://registry.npmjs.org/path-is-absolute/-/path-is-absolute-1.0.1.tgz",
+      "integrity": "sha1-F0uSaHNVNP+8es5r9TpanhtcX18="
+    },
+    "tr46": {
+      "version": "0.0.3",
+      "resolved": "https://registry.npmjs.org/tr46/-/tr46-0.0.3.tgz",
+      "integrity": "sha1-gYT9NH2snNwYWZLzpmIuFLnZq2o="
+    },
+    "universal-user-agent": {
+      "version": "6.0.0",
+      "resolved": "https://registry.npmjs.org/universal-user-agent/-/universal-user-agent-6.0.0.tgz",
+      "integrity": "sha512-isyNax3wXoKaulPDZWHQqbmIx1k2tb9fb3GGDBRxCscfYV2Ch7WxPArBsFEG8s/safwXTT7H4QGhaIkTp9447w=="
+    },
+    "webidl-conversions": {
+      "version": "3.0.1",
+      "resolved": "https://registry.npmjs.org/webidl-conversions/-/webidl-conversions-3.0.1.tgz",
+      "integrity": "sha1-JFNCdeKnvGvnvIZhHMFq4KVlSHE="
+    },
+    "whatwg-url": {
+      "version": "5.0.0",
+      "resolved": "https://registry.npmjs.org/whatwg-url/-/whatwg-url-5.0.0.tgz",
+      "integrity": "sha1-lmRU6HZUYuN2RNNib2dCzotwll0=",
+      "requires": {
+        "tr46": "~0.0.3",
+        "webidl-conversions": "^3.0.0"
+      }
+    },
+    "wrappy": {
+      "version": "1.0.2",
+      "resolved": "https://registry.npmjs.org/wrappy/-/wrappy-1.0.2.tgz",
+      "integrity": "sha1-tSQ9jz7BqjXxNkYFvA0QNuMKtp8="
+    }
+  }
+}

.github/workflows/scripts/releases/upload-release-artifacts/package.json

@@ -0,0 +1,18 @@
+{
+  "name": "upload-release-artifacts",
+  "version": "1.0.0",
+  "description": "",
+  "main": "index.js",
+  "type": "module",
+  "scripts": {
+    "test": "echo \"Error: no test specified\" && exit 1"
+  },
+  "author": "",
+  "license": "ISC",
+  "dependencies": {
+    "@octokit/plugin-retry": "^3.0.9",
+    "@octokit/plugin-throttling": "^3.5.2",
+    "@octokit/rest": "^18.12.0",
+    "glob": "^7.2.0"
+  }
+}

.github/workflows/scripts/validation/lint-gamedb/lint-gamedb.py

@@ -0,0 +1,199 @@
+import yaml
+
+# Assumes this is ran from the root of the repository
+file_path = "./bin/resources/GameIndex.yaml"
+
+# These settings have to be manually kept in sync with the emulator code unfortunately.
+# up to date validation should ALWAYS be provided via the application!
+allowed_game_options = [
+    "name",
+    "region",
+    "compat",
+    "roundModes",
+    "clampModes",
+    "gameFixes",
+    "speedHacks",
+    "memcardFilters",
+    "patches",
+]
+allowed_round_modes = ["eeRoundMode", "vuRoundMode"]
+allowed_clamp_modes = ["eeClampMode", "vuClampMode"]
+allowed_game_fixes = [
+    "VuAddSubHack",
+    "FpuCompareHack",
+    "FpuMulHack",
+    "FpuNegDivHack",
+    "XGKickHack",
+    "EETimingHack",
+    "SkipMPEGHack",
+    "OPHFlagHack",
+    "DMABusyHack",
+    "VIFFIFOHack",
+    "VIF1StallHack",
+    "GIFFIFOHack",
+    "GoemonTlbHack",
+    "VUKickstartHack",
+    "IbitHack",
+    "VUOverflowHack",
+]
+allowed_speed_hacks = ["mvuFlagSpeedHack", "InstantVU1SpeedHack"]
+# Patches are allowed to have a 'default' key or a crc-32 key, followed by
+allowed_patch_options = ["author", "content"]
+
+issue_list = []
+
+
+def is_hex_number(string):
+    try:
+        int(string, 16)
+        return True
+    except Exception:
+        return False
+
+
+def validate_string_option(serial, key, value):
+    if not isinstance(value, str):
+        issue_list.append("[{}]: '{}' must be a string".format(serial, key))
+
+
+def validate_int_option(serial, key, value, low, high):
+    if not isinstance(value, int) or (value < low or value > high):
+        issue_list.append(
+            "[{}]: '{}' must be an int and between {}-{} (inclusive)".format(
+                serial, key, low, high
+            )
+        )
+
+
+def validate_list_of_strings(serial, key, value):
+    if not isinstance(value, list) or not all(isinstance(item, str) for item in value):
+        issue_list.append("[{}]: '{}' must be a list of strings".format(serial, key))
+
+
+def validate_valid_options(serial, key, value, allowed_values):
+    if value not in allowed_values:
+        issue_list.append("[{}]: Invalid '{}' option [{}]".format(serial, key, value))
+
+
+def validate_clamp_round_modes(serial, key, value, allowed_values):
+    if not isinstance(value, dict):
+        issue_list.append("[{}]: '{}' must be a valid object".format(serial, key))
+        return
+    for mode_key, mode_value in value.items():
+        validate_valid_options(serial, key, mode_key, allowed_values)
+        validate_int_option(serial, key, mode_value, 0, 3)
+
+
+def validate_game_fixes(serial, key, value):
+    if not isinstance(value, list):
+        issue_list.append(
+            "[{}]: 'gameFixes' must be a list of valid gameFixes".format(serial)
+        )
+        return
+    for gamefix in value:
+        validate_valid_options(serial, key, gamefix, allowed_game_fixes)
+
+
+def validate_speed_hacks(serial, key, value):
+    if not isinstance(value, dict):
+        issue_list.append("[{}]: 'speedHacks' must be a valid object".format(serial))
+        return
+    for speedhack, speedhack_value in value.items():
+        validate_valid_options(serial, key, speedhack, allowed_speed_hacks)
+        validate_int_option(serial, speedhack, speedhack_value, 0, 1)
+
+
+def validate_patches(serial, key, value):
+    if not isinstance(value, dict):
+        issue_list.append(
+            "[{}]: 'patches' must be valid mapping of CRC32 -> Patch Objects".format(
+                serial
+            )
+        )
+        return
+    for crc, patch in value.items():
+        if crc != "default" and not is_hex_number(str(crc)):
+            issue_list.append(
+                "[{}]: Patches must either be key'd with 'default' or a valid CRC-32 Hex String".format(
+                    serial
+                )
+            )
+            continue
+        for patch_option, option_value in patch.items():
+            validate_valid_options(serial, key, patch_option, allowed_patch_options)
+            if patch_option == "author":
+                validate_string_option(serial, patch_option, option_value)
+            if patch_option == "content":
+                validate_string_option(serial, patch_option, option_value)
+
+
+# pylint:disable=unnecessary-lambda
+option_validation_handlers = {
+    "name": (lambda serial, key, value: validate_string_option(serial, key, value)),
+    "region": (lambda serial, key, value: validate_string_option(serial, key, value)),
+    "compat": (
+        lambda serial, key, value: validate_int_option(serial, key, value, 0, 6)
+    ),
+    "roundModes": (
+        lambda serial, key, value: validate_clamp_round_modes(
+            serial, key, value, allowed_round_modes
+        )
+    ),
+    "clampModes": (
+        lambda serial, key, value: validate_clamp_round_modes(
+            serial, key, value, allowed_clamp_modes
+        )
+    ),
+    "gameFixes": (lambda serial, key, value: validate_game_fixes(serial, key, value)),
+    "speedHacks": (lambda serial, key, value: validate_speed_hacks(serial, key, value)),
+    "memcardFilters": (
+        lambda serial, key, value: validate_list_of_strings(serial, key, value)
+    ),
+    "patches": (lambda serial, key, value: validate_patches(serial, key, value)),
+}
+
+print("Opening {}...".format(file_path))
+with open(file_path) as f:
+    try:
+        print("Attempting to parse GameDB file...")
+        gamedb = yaml.load(f, Loader=yaml.FullLoader)
+    except Exception as err:
+        print(err)
+        print(
+            "Unable to parse GameDB. Exiting, verify that the file indeed is valid YAML."
+        )
+        exit(1)
+
+    print("File loaded successfully, validating schema...")
+    progress_counter = 0
+    for serial, game_options in gamedb.items():
+        progress_counter = progress_counter + 1
+        if progress_counter % 500 == 0 or progress_counter >= len(gamedb.items()):
+            print(
+                "[{}/{}] Processing GameDB Entries...".format(
+                    progress_counter, len(gamedb.items())
+                )
+            )
+
+        # Check for required values
+        if not "name" in game_options.keys():
+            issue_list.append("[{}]: 'name' is a required value".format(serial))
+        if not "region" in game_options.keys():
+            issue_list.append("[{}]: 'region' is a required value".format(serial))
+
+        # Check the options
+        for key, value in game_options.items():
+            if key not in allowed_game_options:
+                issue_list.append("[{}]: Invalid option [{}]".format(serial, key))
+                continue
+
+            if key in option_validation_handlers:
+                option_validation_handlers[key](serial, key, value)
+
+if len(issue_list) > 0:
+    print("Issues found during validation:")
+    print(*issue_list, sep="\n")
+    exit(1)
+else:
+    print("GameDB Validated Successfully!")
+    exit(0)

.github/workflows/scripts/validation/lint-gamedb/requirements.txt

@@ -0,0 +1 @@
+PyYAML==5.4.1

.github/workflows/scripts/windows/validate-vs-filters.ps1

@@ -0,0 +1,19 @@
+$filterFiles = Get-ChildItem $PWD -name -recurse *.vcxproj.filters
+
+$failed = $FALSE
+foreach ($file in $filterFiles) {
+  # Skip 3rdparty files
+  if ($file -NotMatch "^3rdparty") {
+    $expression  = "python -c `"import sys, xml.dom.minidom as d; d.parse(sys.argv[1])`" $($file)"
+    $expression += ';$LastExitCode'
+    $exitCode = Invoke-Expression $expression
+    if($exitCode -ne 0){
+      Write-Host -foregroundColor red "$($file) - Invalid VS filters file.  Likely missing tags"
+      $failed = $TRUE
+    }
+  }
+}
+
+if ($failed) {
+  exit 1
+}

.github/workflows/update-controller-db.yml

@@ -0,0 +1,29 @@
+name: 🏭 Update Controller Database
+
+on:
+  schedule:
+    - cron: "0 16 * * 1" # every monday @ 12pm EST - https://crontab.guru/#0_16_*_*_1
+
+jobs:
+  update-controller-db:
+    if: github.repository == 'PCSX2/pcsx2'
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v2
+
+      - name: Get Latest DB and Prepare DB File
+        run: |
+          cd .github/workflows/scripts/controller-db/
+          wget -O game_controller_db.txt https://raw.githubusercontent.com/gabomdq/SDL_GameControllerDB/master/gamecontrollerdb.txt
+          python ./update-db.py
+          mv ./game_controller_db.txt ${{github.workspace}}/bin/resources/game_controller_db.txt
+
+      - name: Create Pull Request
+        uses: peter-evans/create-pull-request@v3
+        with:
+          title: "pad-linux: Update to latest controller database"
+          commit-message: "pad-linux: Update to latest controller database."
+          committer: "PCSX2 Bot <PCSX2Bot@users.noreply.github.com>"
+          author: "PCSX2 Bot <PCSX2Bot@users.noreply.github.com>"
+          body: "Weekly automatic update of SDL Controller DB for Linux / Mac OS"
+          reviewers: lightningterror

.github/workflows/windows-workflow.yml

@@ -0,0 +1,209 @@
+name: 🖥️ Windows Builds
+
+# Controls when the action will run. Triggers the workflow on push or pull request
+# events but only for the master branch
+on:
+  push:
+    branches:
+      - master
+    tags:
+      - v*
+  pull_request:
+    branches:
+      - master
+    paths-ignore:
+      - '**/*.md'
+      - '.clang-format'
+      - '.codacy.yaml'
+      - '.github/*'
+      - '.github/workflows/lint-gamedb.yml'
+      - '.github/workflows/linux-workflow.yml'
+      - '.github/workflows/macos-workflow.yml'
+      - '.github/workflows/scripts/linux/**'
+      - '.github/workflows/scripts/validation/**'
+      - '.gitignore'
+      - 'bin/PCSX2_keys.ini.default'
+      - 'build.sh'
+      - 'buildbot.xml'
+      - 'linux_various/**'
+      - 'mscompile.cmd'
+      - 'pcsx2/CDVD/Linux/**'
+      - 'pcsx2/DEV9/Linux/**'
+      - 'pcsx2/Linux/**'
+      - 'pcsx2/PAD/Linux/**'
+      - 'pcsx2/SPU2/Linux/**'
+      - 'pcsx2/USB/linux/**'
+
+jobs:
+  build:
+    strategy:
+      # Prevent one build from failing everything (although maybe those should be included as experimental builds instead)
+      fail-fast: false
+      matrix:
+        os: [windows-2019]
+        platform: [Win32, x64]
+        configuration: [Release, Release AVX2, CMake, Qt]
+        experimental: [false]
+        exclude:
+          - platform: win32
+            configuration: Qt
+
+    name: ${{ matrix.platform }} | ${{ matrix.configuration }}
+    runs-on: ${{ matrix.os }}
+    continue-on-error: ${{ matrix.experimental }}
+    # Set some sort of timeout in the event of run-away builds.  We are limited on concurrent jobs so, get rid of them.
+    timeout-minutes: 60
+
+    env:
+      POWERSHELL_TELEMETRY_OPTOUT: 1
+      BUILDCACHE_COMPRESS_FORMAT: ZSTD
+      BUILDCACHE_COMPRESS_LEVEL: 9
+      BUILDCACHE_MAX_CACHE_SIZE: 536870912 # 512MB
+      BUILDCACHE_DIRECT_MODE: true
+      BUILDCACHE_LOG_FILE: ${{ github.workspace }}\buildcache.log
+
+    steps:
+      - name: Checkout Repository
+        uses: actions/checkout@v2
+
+      - name: Checkout Submodules
+        run: git submodule update --init --recursive -j $env:NUMBER_OF_PROCESSORS
+
+      - name: Setup Buildcache
+        uses: mikehardy/buildcache-action@v1.2.2
+        with:
+          cache_key: ${{ matrix.os }} ${{ matrix.platform }} ${{ matrix.configuration }}
+        if: matrix.configuration == 'CMake' # TODO: buildcache on VS
+
+      - name: Verify VS Project Files
+        run: .github\workflows\scripts\windows\validate-vs-filters.ps1
+        if: matrix.configuration != 'CMake'
+
+      - name: Setup msbuild
+        uses: microsoft/setup-msbuild@v1
+        if: matrix.configuration != 'CMake'
+
+      - name: Download Qt build files
+        if: matrix.configuration == 'Qt'
+        shell: cmd
+        run: |
+          cd 3rdparty\qt
+          aria2c https://github.com/PCSX2/pcsx2-windows-dependencies/releases/download/2022-01-20/qt-6.2.2-x64.7z
+          7z x qt-6.2.2-x64.7z
+          del qt-6.2.2-x64.7z
+
+      - name: Generate CMake
+        id: cmake
+        shell: cmd
+        run: |
+          if "${{ github.event.inputs.retainDebugArtifacts }}"=="true" (SET type=RelWithDebInfo) else (SET type=Release)
+          if "${{ matrix.platform }}"=="Win32" (SET vcvars=vcvarsamd64_x86.bat) else (SET vcvars=vcvars64.bat)
+          call "%ProgramFiles(x86)%\Microsoft Visual Studio\2019\Enterprise\VC\Auxiliary\Build\%vcvars%"
+          echo ::set-output name=buildtype::%type%
+          echo ::set-output name=vcvars::%vcvars%
+          cmake . -B build -DCMAKE_BUILD_TYPE=%type% -DLTO_PCSX2_CORE=ON -G Ninja -DCMAKE_C_COMPILER_LAUNCHER=..\buildcache\bin\buildcache.exe -DCMAKE_CXX_COMPILER_LAUNCHER=..\buildcache\bin\buildcache.exe -DCMAKE_DISABLE_PRECOMPILE_HEADERS=ON
+        if: matrix.configuration == 'CMake'
+
+      - name: Build PCSX2
+        shell: cmd
+        env:
+          # Set to 'true' to retain the .pdb / .exp / .lib, etc files which can be useful for repro'ing issues that only occur in the compiled .exe
+          RetainDebuggingArtifacts: ${{ github.event.inputs.retainDebugArtifacts == 'true' }}
+        run: |
+          if "${{ matrix.configuration }}"=="CMake" (
+            call "%ProgramFiles(x86)%\Microsoft Visual Studio\2019\Enterprise\VC\Auxiliary\Build\${{ steps.cmake.outputs.vcvars }}"
+            cmake --build build --config ${{ steps.cmake.outputs.buildtype }}
+          ) else (
+              if "${{ matrix.configuration }}"=="Qt" (
+                rem This is hardcoded to Release AVX2 for now, because of the artifact naming below.
+                msbuild "PCSX2_qt.sln" /m /v:m /p:Configuration="Release AVX2" /p:Platform="${{ matrix.platform }}"
+              ) else (
+                msbuild "PCSX2_suite.sln" /m /v:m /p:Configuration="${{ matrix.configuration }}" /p:Platform="${{ matrix.platform }}"
+              )
+          )
+
+      - name: Run Tests
+        shell: cmd
+        run: |
+          call "%ProgramFiles(x86)%\Microsoft Visual Studio\2019\Enterprise\VC\Auxiliary\Build\${{ steps.cmake.outputs.vcvars }}"
+          cmake --build build --config ${{ steps.cmake.outputs.buildtype }} --target unittests
+        if: matrix.configuration == 'CMake'
+
+      - name: Prepare Artifact Metadata
+        id: artifact-metadata
+        shell: bash
+        run: |
+          ARCH=$([ "${{ matrix.platform }}" == Win32 ] && echo "32bit" || echo "64bit")
+          case "${{ matrix.configuration }}" in
+            Release) SIMD="SSE4";;
+            *AVX2)   SIMD="AVX2";;
+            Qt)      SIMD="QT";;
+            CMake)   SIMD="CMake"
+                     cp build/pcsx2/pcsx2* bin/ ;;
+            *)       SIMD="UNKNOWN";;
+          esac
+          if [ ${{ github.event_name }} == "pull_request" ]; then
+            PR_SHA=$(git rev-parse --short "${{ github.event.pull_request.head.sha }}")
+            ARTIFACT_NAME="PCSX2-${ARCH}-${SIMD}"
+            if [ ! -z "${{ github.event.pull_request.number }}" ]; then
+              PR_NUM=${{ github.event.pull_request.number }}
+              ARTIFACT_NAME="${ARTIFACT_NAME}-pr[${PR_NUM}]"
+            fi
+            ARTIFACT_NAME="${ARTIFACT_NAME}-sha[${PR_SHA}]"
+            if [ ! -z "${{ github.event.pull_request.title }}" ]; then
+              PR_TITLE=$(echo "${{ github.event.pull_request.title }}" | tr -cd '[a-zA-Z0-9[:space:]]_-')
+              ARTIFACT_NAME="${ARTIFACT_NAME}-title["${PR_TITLE}""
+            fi
+          else
+            SHA=$(git rev-parse --short "$GITHUB_SHA")
+            ARTIFACT_NAME="PCSX2-${ARCH}-${SIMD}-sha[${SHA}"
+          fi
+          TRIMMED_ARTIFACT_NAME=$(printf "%.199s]" "$ARTIFACT_NAME")
+          echo "name=$TRIMMED_ARTIFACT_NAME"
+          echo "##[set-output name=name;]${TRIMMED_ARTIFACT_NAME}"
+          echo "##[set-output name=arch;]${ARCH}"
+          echo "##[set-output name=simd;]${SIMD}"
+
+      - name: Upload artifact
+        uses: actions/upload-artifact@v2
+        continue-on-error: true
+        with:
+          name: ${{ steps.artifact-metadata.outputs.name }}
+          path: |
+            ./bin
+            !./bin/**/*.bsc
+            !./bin/**/*.exp
+            !./bin/**/*.ilk
+            !./bin/**/*.iobj
+            !./bin/**/*.ipdb
+            !./bin/**/*.pdb
+            !./bin/**/*.lib
+
+      - name: Upload artifact - with symbols
+        if: matrix.configuration != 'CMake'
+        uses: actions/upload-artifact@v2
+        continue-on-error: true
+        with:
+          name: ${{ steps.artifact-metadata.outputs.name }}-symbols
+          path: ./bin/**/*.pdb
+
+      # ---- Release / Tagging related steps ----
+      - name: Prepare Build Artifacts
+        if: github.repository == 'PCSX2/pcsx2' && startsWith(github.ref, 'refs/tags/') && matrix.configuration != 'CMake' && matrix.configuration != 'Qt'
+        run: |
+          mkdir -p ./ci-artifacts/
+          7z a ./ci-artifacts/windows-${{ steps.artifact-metadata.outputs.arch }}-${{ steps.artifact-metadata.outputs.simd }}.7z ./bin/* '-xr!*bsc' '-xr!*.exp' '-xr!*.ilk' '-xr!*.iobj' '-xr!*.ipdb' '-xr!*.pdb' '-xr!*.lib'
+          7z a ./ci-artifacts/windows-${{ steps.artifact-metadata.outputs.arch }}-${{ steps.artifact-metadata.outputs.simd }}-symbols.7z ./bin/*.pdb
+          ls ./ci-artifacts/
+
+      - name: Upload Assets and Potential Publish Release
+        if: github.repository == 'PCSX2/pcsx2' && startsWith(github.ref, 'refs/tags/') && matrix.configuration != 'CMake' && matrix.configuration != 'Qt'
+        env:
+          GITHUB_TOKEN: ${{ secrets.BOT_PAT }}
+          ASSET_DIR: ${{ github.WORKSPACE }}/ci-artifacts
+          ASSET_EXTENSION: 7z
+          TAG_TO_SEARCH_FOR: ${{ github.REF }}
+        run: |
+          cd ./.github/workflows/scripts/releases/upload-release-artifacts
+          npm ci
+          node index.js

.gitignore

@@ -0,0 +1,122 @@
+.*.swp
+.*.swn
+.*.swo
+
+*.suo
+*.ncb
+*.sdf
+*.opensdf
+*.user
+*.log
+*.dsp
+*.dsw
+*.bsc
+*.aps
+*.exe
+*.wav
+
+*.trace
+*.dump
+
+*.asm
+
+*.VC.db
+*.VC.VC.opendb
+
+**/Win32/Release*
+**/Win32/Debug*
+**/Win32/Devel*
+**/x64/Release*
+**/x64/Debug*
+**/x64/Devel*
+
+**/bin/PCSX2-linux.sh
+
+_ReSharper.*
+pcsx2.snapshot_*
+svnrev.h
+
+/build
+/build_dev
+/build_dbg
+/obj-*
+*.obj
+
+.DS_Store
+Thumbs.db
+
+Debug.txt
+install_log.txt
+padLog.txt
+GS_opengl_debug.txt
+
+Debug
+Release
+Devel
+
+oprofile_data/
+
+# Recording Specific Ignores (pcsx2-rr)
+*.p2s
+*.p2m2
+*.p2m2_backup
+*.p2m2_SaveState.p2s
+
+# Visual Studio upgrades
+/Backup*
+/UpgradeLog*.htm
+/.vscode*
+
+/bin/**/*.dll
+/bin/**/*.exp
+/bin/**/*.ilk
+/bin/**/*.lib
+/bin/**/*.pdb
+/bin/pcsx2
+/bin/PCSX2-linux.sh
+/bin/*ReplayLoader
+/bin/GS*.txt
+/bin/qt.conf
+/bin/bios
+/bin/cache
+/bin/cheats
+/bin/covers
+/bin/dumps
+/bin/gamesettings
+/bin/help
+/bin/inis
+/bin/logs
+/bin/memcards
+/bin/plugins
+/bin/snaps
+/bin/sstates
+/bin/translations
+/deps
+/ipch
+
+!/3rdparty/libjpeg/change.log
+/3rdparty/portaudio/portaudio-2.0.pc
+/3rdparty/portaudio/bin
+/3rdparty/portaudio/bin-*
+/3rdparty/portaudio/autom4te.cache
+/3rdparty/portaudio/libtool
+/3rdparty/portaudio/config.*
+/3rdparty/portaudio/lib-stamp
+/3rdparty/portaudio/Makefile
+/3rdparty/portaudio/bindings
+/3rdparty/portaudio/test
+/3rdparty/portaudio/testcvs
+/3rdparty/portaudio/src/hostapi/asio/ASIOSDK/common
+/3rdparty/portaudio/src/hostapi/asio/ASIOSDK/host
+/3rdparty/portaudio/src/hostapi/wasapi/mingw-include
+/3rdparty/**/include/wx/setup.h
+/3rdparty/**/wx/msw/rcdefs.h
+/pcsx2/gui/Resources/*.h
+!/pcsx2/gui/Resources/EmbeddedImage.h
+/tools/bin
+.vs
+
+/out/build/x64-Debug (default)
+CMakeSettings.json
+/ci-artifacts/
+/out/

.gitmodules

@@ -0,0 +1,35 @@
+[submodule "3rdparty/xz/xz"]
+	path = 3rdparty/xz/xz
+	url = https://github.com/PCSX2/xz.git
+[submodule "3rdparty/gtest"]
+	path = 3rdparty/gtest
+	url = https://github.com/google/googletest.git
+[submodule "3rdparty/fmt/fmt"]
+	path = 3rdparty/fmt/fmt
+	url = https://github.com/fmtlib/fmt.git
+[submodule "3rdparty/libchdr/libchdr"]
+	path = 3rdparty/libchdr/libchdr
+	url = https://github.com/rtissera/libchdr.git
+[submodule "3rdparty/wil"]
+	path = 3rdparty/wil
+	url = https://github.com/microsoft/wil.git
+	branch = master
+[submodule "3rdparty/cubeb/cubeb"]
+	path = 3rdparty/cubeb/cubeb
+	url = https://github.com/mozilla/cubeb.git
+[submodule "3rdparty/rapidyaml/rapidyaml"]
+	path = 3rdparty/rapidyaml/rapidyaml
+	url = https://github.com/biojppm/rapidyaml.git
+	branch = master
+[submodule "3rdparty/imgui/imgui"]
+	path = 3rdparty/imgui/imgui
+	url = https://github.com/ocornut/imgui.git
+[submodule "3rdparty/glslang/glslang"]
+	path = 3rdparty/glslang/glslang
+	url = https://github.com/KhronosGroup/glslang.git
+[submodule "3rdparty/vulkan-headers"]
+	path = 3rdparty/vulkan-headers
+	url = https://github.com/KhronosGroup/Vulkan-Headers.git
+[submodule "3rdparty/sdl2/SDL"]
+	path = 3rdparty/sdl2/SDL
+	url = https://github.com/libsdl-org/SDL.git

3rdparty/3rdparty.props

@@ -1,21 +1,21 @@
-<?xml version="1.0" encoding="utf-8"?>
-<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
-  <PropertyGroup>
-    <_ProjectFileVersion>10.0.30128.1</_ProjectFileVersion>
-    <OutDir>$(SvnRootDir)\deps\$(PlatformName)\$(Configuration)\</OutDir>
-    <IntDir>$(PlatformName)\$(Configuration)\</IntDir>
-    <ExtensionsToDeleteOnClean>*.bsc;*.idb;*.sbr;*.res;*.pch;*.pdb;*.obj;*.tlb;*.tli;*.tlh;*.tmp;*.rsp;*.pgc;*.pgd;*.meta;$(TargetPath);$(ExtensionsToDeleteOnClean)</ExtensionsToDeleteOnClean>
-  </PropertyGroup>
-  <ItemDefinitionGroup>
-    <ClCompile>
-      <AdditionalIncludeDirectories>$(ProjectDir);%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-      <PreprocessorDefinitions>__WIN32__;WIN32;_WINDOWS;_CRT_SECURE_NO_WARNINGS;_CRT_SECURE_NO_DEPRECATE;%(PreprocessorDefinitions)</PreprocessorDefinitions>
-      <StructMemberAlignment>16Bytes</StructMemberAlignment>
-      <FunctionLevelLinking>true</FunctionLevelLinking>
-      <RuntimeTypeInfo>false</RuntimeTypeInfo>
-      <WarningLevel>Level3</WarningLevel>
-      <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
-      <CompileAs>Default</CompileAs>
-    </ClCompile>
-  </ItemDefinitionGroup>
-</Project>
+<?xml version="1.0" encoding="utf-8"?>
+<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <PropertyGroup>
+    <_ProjectFileVersion>10.0.30128.1</_ProjectFileVersion>
+    <OutDir>$(SolutionDir)deps\$(PlatformName)\$(Configuration)\</OutDir>
+    <IntDir>$(PlatformName)\$(Configuration)\</IntDir>
+    <ExtensionsToDeleteOnClean>*.bsc;*.idb;*.sbr;*.res;*.pch;*.pdb;*.obj;*.tlb;*.tli;*.tlh;*.tmp;*.rsp;*.pgc;*.pgd;*.meta;$(TargetPath);$(ExtensionsToDeleteOnClean)</ExtensionsToDeleteOnClean>
+  </PropertyGroup>
+  <ItemDefinitionGroup>
+    <ClCompile>
+      <AdditionalIncludeDirectories>$(ProjectDir);%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+      <PreprocessorDefinitions>__WIN32__;WIN32;_WINDOWS;_CRT_SECURE_NO_WARNINGS;_CRT_SECURE_NO_DEPRECATE;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <StructMemberAlignment>16Bytes</StructMemberAlignment>
+      <FunctionLevelLinking>true</FunctionLevelLinking>
+      <RuntimeTypeInfo>false</RuntimeTypeInfo>
+      <WarningLevel>TurnOffAllWarnings</WarningLevel>
+      <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+      <CompileAs>Default</CompileAs>
+    </ClCompile>
+  </ItemDefinitionGroup>
+</Project>

3rdparty/3rdparty.vsprops

@@ -1,26 +0,0 @@
-<?xml version="1.0" encoding="windows-1250"?>
-<VisualStudioPropertySheet
-	ProjectType="Visual C++"
-	Version="8.00"
-	Name="3rdparty"
-	OutputDirectory="$(SvnRootDir)\deps\$(PlatformName)\$(ConfigurationName)"
-	IntermediateDirectory="$(PlatformName)\$(ConfigurationName)"
-	DeleteExtensionsOnClean="*.bsc;*.idb;*.sbr;*.res;*.pch;*.pdb;*.obj;*.tlb;*.tli;*.tlh;*.tmp;*.rsp;*.pgc;*.pgd;*.meta;$(TargetPath)"
-	>
-	<Tool
-		Name="VCCLCompilerTool"
-		AdditionalIncludeDirectories="&quot;$(ProjectDir)&quot;"
-		PreprocessorDefinitions="__WIN32__;WIN32;_WINDOWS;_CRT_SECURE_NO_WARNINGS;_CRT_SECURE_NO_DEPRECATE"
-		StructMemberAlignment="5"
-		EnableFunctionLevelLinking="true"
-		RuntimeTypeInfo="false"
-		WarningLevel="3"
-		DebugInformationFormat="3"
-		CompileAs="0"
-	/>
-	<Tool
-		Name="VCLinkerTool"
-		GenerateDebugInformation="true"
-		SubSystem="2"
-	/>
-</VisualStudioPropertySheet>

3rdparty/3rdpartyDLL.props

@@ -1,28 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
-  <PropertyGroup>
-    <_ProjectFileVersion>10.0.30128.1</_ProjectFileVersion>
-    <OutDir>$(SvnRootDir)\deps\$(PlatformName)\$(Configuration)\</OutDir>
-    <IntDir>$(PlatformName)\$(Configuration)\</IntDir>
-    <LinkIncremental>false</LinkIncremental>
-  </PropertyGroup>
-  <ItemDefinitionGroup>
-    <ClCompile>
-      <AdditionalIncludeDirectories>$(ProjectDir);%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-      <PreprocessorDefinitions>__WIN32__;WIN32;_WINDOWS;_CRT_SECURE_NO_WARNINGS;_CRT_SECURE_NO_DEPRECATE;%(PreprocessorDefinitions)</PreprocessorDefinitions>
-      <StructMemberAlignment>16Bytes</StructMemberAlignment>
-      <RuntimeTypeInfo>false</RuntimeTypeInfo>
-      <WarningLevel>Level3</WarningLevel>
-      <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
-    </ClCompile>
-    <Link>
-      <OutputFile>$(SolutionDir)bin\$(ProjectName).dll</OutputFile>
-      <GenerateDebugInformation>true</GenerateDebugInformation>
-      <SubSystem>Windows</SubSystem>
-      <ImportLibrary>$(OutDir)$(ProjectName).lib</ImportLibrary>
-    </Link>
-    <ResourceCompile>
-      <AdditionalIncludeDirectories>$(SvnRootDir)/common/include;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-    </ResourceCompile>
-  </ItemDefinitionGroup>
-</Project>

3rdparty/3rdpartyDLL.vsprops

@@ -1,30 +0,0 @@
-<?xml version="1.0" encoding="windows-1250"?>
-<VisualStudioPropertySheet
-	ProjectType="Visual C++"
-	Version="8.00"
-	Name="3rdpartyDLL"
-	OutputDirectory="$(SvnRootDir)\deps\$(PlatformName)\$(ConfigurationName)"
-	IntermediateDirectory="$(PlatformName)\$(ConfigurationName)"
-	>
-	<Tool
-		Name="VCCLCompilerTool"
-		AdditionalIncludeDirectories="&quot;$(ProjectDir)&quot;"
-		PreprocessorDefinitions="__WIN32__;WIN32;_WINDOWS;_CRT_SECURE_NO_WARNINGS;_CRT_SECURE_NO_DEPRECATE"
-		StructMemberAlignment="5"
-		RuntimeTypeInfo="false"
-		WarningLevel="3"
-		DebugInformationFormat="3"
-	/>
-	<Tool
-		Name="VCLinkerTool"
-		OutputFile="$(SolutionDir)\bin\$(ProjectName).dll"
-		LinkIncremental="1"
-		GenerateDebugInformation="true"
-		SubSystem="2"
-		ImportLibrary="$(OutDir)\$(ProjectName).lib"
-	/>
-	<Tool
-		Name="VCResourceCompilerTool"
-		AdditionalIncludeDirectories="&quot;$(SvnRootDir)/common/include&quot;"
-	/>
-</VisualStudioPropertySheet>

3rdparty/CMakeLists.txt

@@ -1,22 +0,0 @@
-# Check that people use the good file
-if(NOT TOP_CMAKE_WAS_SOURCED)
-    message(FATAL_ERROR "
-    You did not 'cmake' the good CMakeLists.txt file. Use the one in the top dir.
-    It is advice to delete all wrongly generated cmake stuff => CMakeFiles & CMakeCache.txt")
-endif(NOT TOP_CMAKE_WAS_SOURCED)
-
-
-# build project zlib
-if(projectZLIB)
-	add_subdirectory(zlib)
-endif(projectZLIB)
-
-# build project SoundTouch
-if(projectSoundTouch)
-	add_subdirectory(SoundTouch)
-endif(projectSoundTouch)
-
-# build project sdl
-if(projectSDL)
-    add_subdirectory(SDL-1.3.0-5387)
-endif(projectSDL)

3rdparty/DefaultProjectRootDir.props

@@ -1,18 +1,18 @@
-<?xml version="1.0" encoding="utf-8"?>
-<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
-  <PropertyGroup Label="UserMacros">
-    <ProjectRootDir>$(ProjectDir)</ProjectRootDir>
-    <SvnRootDir>$(ProjectRootDir)\..\..</SvnRootDir>
-  </PropertyGroup>
-  <PropertyGroup>
-    <_ProjectFileVersion>10.0.30128.1</_ProjectFileVersion>
-  </PropertyGroup>
-  <ItemGroup>
-    <BuildMacro Include="ProjectRootDir">
-      <Value>$(ProjectRootDir)</Value>
-    </BuildMacro>
-    <BuildMacro Include="SvnRootDir">
-      <Value>$(SvnRootDir)</Value>
-    </BuildMacro>
-  </ItemGroup>
+<?xml version="1.0" encoding="utf-8"?>
+<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <PropertyGroup Label="UserMacros">
+    <ProjectRootDir>$(ProjectDir)</ProjectRootDir>
+    <SvnRootDir>$(ProjectRootDir)\..\..</SvnRootDir>
+  </PropertyGroup>
+  <PropertyGroup>
+    <_ProjectFileVersion>10.0.30128.1</_ProjectFileVersion>
+  </PropertyGroup>
+  <ItemGroup>
+    <BuildMacro Include="ProjectRootDir">
+      <Value>$(ProjectRootDir)</Value>
+    </BuildMacro>
+    <BuildMacro Include="SvnRootDir">
+      <Value>$(SvnRootDir)</Value>
+    </BuildMacro>
+  </ItemGroup>
 </Project>

3rdparty/DefaultProjectRootDir.vsprops

@@ -1,15 +0,0 @@
-<?xml version="1.0" encoding="Windows-1252"?>
-<VisualStudioPropertySheet
-	ProjectType="Visual C++"
-	Version="8.00"
-	Name="DefaultProjectRootDir"
-	>
-	<UserMacro
-		Name="ProjectRootDir"
-		Value="$(ProjectDir)"
-	/>
-	<UserMacro
-		Name="SvnRootDir"
-		Value="$(ProjectRootDir)\..\.."
-	/>
-</VisualStudioPropertySheet>

3rdparty/GL/khrplatform.h

@@ -0,0 +1,282 @@
+#ifndef __khrplatform_h_
+#define __khrplatform_h_
+
+/*
+** Copyright (c) 2008-2018 The Khronos Group Inc.
+**
+** Permission is hereby granted, free of charge, to any person obtaining a
+** copy of this software and/or associated documentation files (the
+** "Materials"), to deal in the Materials without restriction, including
+** without limitation the rights to use, copy, modify, merge, publish,
+** distribute, sublicense, and/or sell copies of the Materials, and to
+** permit persons to whom the Materials are furnished to do so, subject to
+** the following conditions:
+**
+** The above copyright notice and this permission notice shall be included
+** in all copies or substantial portions of the Materials.
+**
+** THE MATERIALS ARE PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+** EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+** MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+** IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
+** CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+** TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+** MATERIALS OR THE USE OR OTHER DEALINGS IN THE MATERIALS.
+*/
+
+/* Khronos platform-specific types and definitions.
+ *
+ * The master copy of khrplatform.h is maintained in the Khronos EGL
+ * Registry repository at https://github.com/KhronosGroup/EGL-Registry
+ * The last semantic modification to khrplatform.h was at commit ID:
+ *      67a3e0864c2d75ea5287b9f3d2eb74a745936692
+ *
+ * Adopters may modify this file to suit their platform. Adopters are
+ * encouraged to submit platform specific modifications to the Khronos
+ * group so that they can be included in future versions of this file.
+ * Please submit changes by filing pull requests or issues on
+ * the EGL Registry repository linked above.
+ *
+ *
+ * See the Implementer's Guidelines for information about where this file
+ * should be located on your system and for more details of its use:
+ *    http://www.khronos.org/registry/implementers_guide.pdf
+ *
+ * This file should be included as
+ *        #include <KHR/khrplatform.h>
+ * by Khronos client API header files that use its types and defines.
+ *
+ * The types in khrplatform.h should only be used to define API-specific types.
+ *
+ * Types defined in khrplatform.h:
+ *    khronos_int8_t              signed   8  bit
+ *    khronos_uint8_t             unsigned 8  bit
+ *    khronos_int16_t             signed   16 bit
+ *    khronos_uint16_t            unsigned 16 bit
+ *    khronos_int32_t             signed   32 bit
+ *    khronos_uint32_t            unsigned 32 bit
+ *    khronos_int64_t             signed   64 bit
+ *    khronos_uint64_t            unsigned 64 bit
+ *    khronos_intptr_t            signed   same number of bits as a pointer
+ *    khronos_uintptr_t           unsigned same number of bits as a pointer
+ *    khronos_ssize_t             signed   size
+ *    khronos_usize_t             unsigned size
+ *    khronos_float_t             signed   32 bit floating point
+ *    khronos_time_ns_t           unsigned 64 bit time in nanoseconds
+ *    khronos_utime_nanoseconds_t unsigned time interval or absolute time in
+ *                                         nanoseconds
+ *    khronos_stime_nanoseconds_t signed time interval in nanoseconds
+ *    khronos_boolean_enum_t      enumerated boolean type. This should
+ *      only be used as a base type when a client API's boolean type is
+ *      an enum. Client APIs which use an integer or other type for
+ *      booleans cannot use this as the base type for their boolean.
+ *
+ * Tokens defined in khrplatform.h:
+ *
+ *    KHRONOS_FALSE, KHRONOS_TRUE Enumerated boolean false/true values.
+ *
+ *    KHRONOS_SUPPORT_INT64 is 1 if 64 bit integers are supported; otherwise 0.
+ *    KHRONOS_SUPPORT_FLOAT is 1 if floats are supported; otherwise 0.
+ *
+ * Calling convention macros defined in this file:
+ *    KHRONOS_APICALL
+ *    KHRONOS_APIENTRY
+ *    KHRONOS_APIATTRIBUTES
+ *
+ * These may be used in function prototypes as:
+ *
+ *      KHRONOS_APICALL void KHRONOS_APIENTRY funcname(
+ *                                  int arg1,
+ *                                  int arg2) KHRONOS_APIATTRIBUTES;
+ */
+
+/*-------------------------------------------------------------------------
+ * Definition of KHRONOS_APICALL
+ *-------------------------------------------------------------------------
+ * This precedes the return type of the function in the function prototype.
+ */
+#if defined(_WIN32) && !defined(__SCITECH_SNAP__)
+#   define KHRONOS_APICALL __declspec(dllimport)
+#elif defined (__SYMBIAN32__)
+#   define KHRONOS_APICALL IMPORT_C
+#elif defined(__ANDROID__)
+#   define KHRONOS_APICALL __attribute__((visibility("default")))
+#else
+#   define KHRONOS_APICALL
+#endif
+
+/*-------------------------------------------------------------------------
+ * Definition of KHRONOS_APIENTRY
+ *-------------------------------------------------------------------------
+ * This follows the return type of the function  and precedes the function
+ * name in the function prototype.
+ */
+#if defined(_WIN32) && !defined(_WIN32_WCE) && !defined(__SCITECH_SNAP__)
+    /* Win32 but not WinCE */
+#   define KHRONOS_APIENTRY __stdcall
+#else
+#   define KHRONOS_APIENTRY
+#endif
+
+/*-------------------------------------------------------------------------
+ * Definition of KHRONOS_APIATTRIBUTES
+ *-------------------------------------------------------------------------
+ * This follows the closing parenthesis of the function prototype arguments.
+ */
+#if defined (__ARMCC_2__)
+#define KHRONOS_APIATTRIBUTES __softfp
+#else
+#define KHRONOS_APIATTRIBUTES
+#endif
+
+/*-------------------------------------------------------------------------
+ * basic type definitions
+ *-----------------------------------------------------------------------*/
+#if (defined(__STDC_VERSION__) && __STDC_VERSION__ >= 199901L) || defined(__GNUC__) || defined(__SCO__) || defined(__USLC__)
+
+
+/*
+ * Using <stdint.h>
+ */
+#include <stdint.h>
+typedef int32_t                 khronos_int32_t;
+typedef uint32_t                khronos_uint32_t;
+typedef int64_t                 khronos_int64_t;
+typedef uint64_t                khronos_uint64_t;
+#define KHRONOS_SUPPORT_INT64   1
+#define KHRONOS_SUPPORT_FLOAT   1
+
+#elif defined(__VMS ) || defined(__sgi)
+
+/*
+ * Using <inttypes.h>
+ */
+#include <inttypes.h>
+typedef int32_t                 khronos_int32_t;
+typedef uint32_t                khronos_uint32_t;
+typedef int64_t                 khronos_int64_t;
+typedef uint64_t                khronos_uint64_t;
+#define KHRONOS_SUPPORT_INT64   1
+#define KHRONOS_SUPPORT_FLOAT   1
+
+#elif defined(_WIN32) && !defined(__SCITECH_SNAP__)
+
+/*
+ * Win32
+ */
+typedef __int32                 khronos_int32_t;
+typedef unsigned __int32        khronos_uint32_t;
+typedef __int64                 khronos_int64_t;
+typedef unsigned __int64        khronos_uint64_t;
+#define KHRONOS_SUPPORT_INT64   1
+#define KHRONOS_SUPPORT_FLOAT   1
+
+#elif defined(__sun__) || defined(__digital__)
+
+/*
+ * Sun or Digital
+ */
+typedef int                     khronos_int32_t;
+typedef unsigned int            khronos_uint32_t;
+#if defined(__arch64__) || defined(_LP64)
+typedef long int                khronos_int64_t;
+typedef unsigned long int       khronos_uint64_t;
+#else
+typedef long long int           khronos_int64_t;
+typedef unsigned long long int  khronos_uint64_t;
+#endif /* __arch64__ */
+#define KHRONOS_SUPPORT_INT64   1
+#define KHRONOS_SUPPORT_FLOAT   1
+
+#elif 0
+
+/*
+ * Hypothetical platform with no float or int64 support
+ */
+typedef int                     khronos_int32_t;
+typedef unsigned int            khronos_uint32_t;
+#define KHRONOS_SUPPORT_INT64   0
+#define KHRONOS_SUPPORT_FLOAT   0
+
+#else
+
+/*
+ * Generic fallback
+ */
+#include <stdint.h>
+typedef int32_t                 khronos_int32_t;
+typedef uint32_t                khronos_uint32_t;
+typedef int64_t                 khronos_int64_t;
+typedef uint64_t                khronos_uint64_t;
+#define KHRONOS_SUPPORT_INT64   1
+#define KHRONOS_SUPPORT_FLOAT   1
+
+#endif
+
+
+/*
+ * Types that are (so far) the same on all platforms
+ */
+typedef signed   char          khronos_int8_t;
+typedef unsigned char          khronos_uint8_t;
+typedef signed   short int     khronos_int16_t;
+typedef unsigned short int     khronos_uint16_t;
+
+/*
+ * Types that differ between LLP64 and LP64 architectures - in LLP64,
+ * pointers are 64 bits, but 'long' is still 32 bits. Win64 appears
+ * to be the only LLP64 architecture in current use.
+ */
+#ifdef _WIN64
+typedef signed   long long int khronos_intptr_t;
+typedef unsigned long long int khronos_uintptr_t;
+typedef signed   long long int khronos_ssize_t;
+typedef unsigned long long int khronos_usize_t;
+#else
+typedef signed   long  int     khronos_intptr_t;
+typedef unsigned long  int     khronos_uintptr_t;
+typedef signed   long  int     khronos_ssize_t;
+typedef unsigned long  int     khronos_usize_t;
+#endif
+
+#if KHRONOS_SUPPORT_FLOAT
+/*
+ * Float type
+ */
+typedef          float         khronos_float_t;
+#endif
+
+#if KHRONOS_SUPPORT_INT64
+/* Time types
+ *
+ * These types can be used to represent a time interval in nanoseconds or
+ * an absolute Unadjusted System Time.  Unadjusted System Time is the number
+ * of nanoseconds since some arbitrary system event (e.g. since the last
+ * time the system booted).  The Unadjusted System Time is an unsigned
+ * 64 bit value that wraps back to 0 every 584 years.  Time intervals
+ * may be either signed or unsigned.
+ */
+typedef khronos_uint64_t       khronos_utime_nanoseconds_t;
+typedef khronos_int64_t        khronos_stime_nanoseconds_t;
+#endif
+
+/*
+ * Dummy value used to pad enum types to 32 bits.
+ */
+#ifndef KHRONOS_MAX_ENUM
+#define KHRONOS_MAX_ENUM 0x7FFFFFFF
+#endif
+
+/*
+ * Enumerated boolean type
+ *
+ * Values other than zero should be considered to be true.  Therefore
+ * comparisons should not be made against KHRONOS_TRUE.
+ */
+typedef enum {
+    KHRONOS_FALSE = 0,
+    KHRONOS_TRUE  = 1,
+    KHRONOS_BOOLEAN_ENUM_FORCE_SIZE = KHRONOS_MAX_ENUM
+} khronos_boolean_enum_t;
+
+#endif /* __khrplatform_h_ */

3rdparty/GL/wglext.h

@@ -1,901 +0,0 @@
-#ifndef __wglext_h_
-#define __wglext_h_
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/*
-** Copyright (c) 2007-2010 The Khronos Group Inc.
-** 
-** Permission is hereby granted, free of charge, to any person obtaining a
-** copy of this software and/or associated documentation files (the
-** "Materials"), to deal in the Materials without restriction, including
-** without limitation the rights to use, copy, modify, merge, publish,
-** distribute, sublicense, and/or sell copies of the Materials, and to
-** permit persons to whom the Materials are furnished to do so, subject to
-** the following conditions:
-** 
-** The above copyright notice and this permission notice shall be included
-** in all copies or substantial portions of the Materials.
-** 
-** THE MATERIALS ARE PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-** EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
-** MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
-** IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
-** CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
-** TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
-** MATERIALS OR THE USE OR OTHER DEALINGS IN THE MATERIALS.
-*/
-
-/* Function declaration macros - to move into glplatform.h */
-
-#if defined(_WIN32) && !defined(APIENTRY) && !defined(__CYGWIN__) && !defined(__SCITECH_SNAP__)
-#define WIN32_LEAN_AND_MEAN 1
-#include <windows.h>
-#endif
-
-#ifndef APIENTRY
-#define APIENTRY
-#endif
-#ifndef APIENTRYP
-#define APIENTRYP APIENTRY *
-#endif
-#ifndef GLAPI
-#define GLAPI extern
-#endif
-
-/*************************************************************/
-
-/* Header file version number */
-/* wglext.h last updated 2010/08/06 */
-/* Current version at http://www.opengl.org/registry/ */
-#define WGL_WGLEXT_VERSION 22
-
-#ifndef WGL_ARB_buffer_region
-#define WGL_FRONT_COLOR_BUFFER_BIT_ARB 0x00000001
-#define WGL_BACK_COLOR_BUFFER_BIT_ARB  0x00000002
-#define WGL_DEPTH_BUFFER_BIT_ARB       0x00000004
-#define WGL_STENCIL_BUFFER_BIT_ARB     0x00000008
-#endif
-
-#ifndef WGL_ARB_multisample
-#define WGL_SAMPLE_BUFFERS_ARB         0x2041
-#define WGL_SAMPLES_ARB                0x2042
-#endif
-
-#ifndef WGL_ARB_extensions_string
-#endif
-
-#ifndef WGL_ARB_pixel_format
-#define WGL_NUMBER_PIXEL_FORMATS_ARB   0x2000
-#define WGL_DRAW_TO_WINDOW_ARB         0x2001
-#define WGL_DRAW_TO_BITMAP_ARB         0x2002
-#define WGL_ACCELERATION_ARB           0x2003
-#define WGL_NEED_PALETTE_ARB           0x2004
-#define WGL_NEED_SYSTEM_PALETTE_ARB    0x2005
-#define WGL_SWAP_LAYER_BUFFERS_ARB     0x2006
-#define WGL_SWAP_METHOD_ARB            0x2007
-#define WGL_NUMBER_OVERLAYS_ARB        0x2008
-#define WGL_NUMBER_UNDERLAYS_ARB       0x2009
-#define WGL_TRANSPARENT_ARB            0x200A
-#define WGL_TRANSPARENT_RED_VALUE_ARB  0x2037
-#define WGL_TRANSPARENT_GREEN_VALUE_ARB 0x2038
-#define WGL_TRANSPARENT_BLUE_VALUE_ARB 0x2039
-#define WGL_TRANSPARENT_ALPHA_VALUE_ARB 0x203A
-#define WGL_TRANSPARENT_INDEX_VALUE_ARB 0x203B
-#define WGL_SHARE_DEPTH_ARB            0x200C
-#define WGL_SHARE_STENCIL_ARB          0x200D
-#define WGL_SHARE_ACCUM_ARB            0x200E
-#define WGL_SUPPORT_GDI_ARB            0x200F
-#define WGL_SUPPORT_OPENGL_ARB         0x2010
-#define WGL_DOUBLE_BUFFER_ARB          0x2011
-#define WGL_STEREO_ARB                 0x2012
-#define WGL_PIXEL_TYPE_ARB             0x2013
-#define WGL_COLOR_BITS_ARB             0x2014
-#define WGL_RED_BITS_ARB               0x2015
-#define WGL_RED_SHIFT_ARB              0x2016
-#define WGL_GREEN_BITS_ARB             0x2017
-#define WGL_GREEN_SHIFT_ARB            0x2018
-#define WGL_BLUE_BITS_ARB              0x2019
-#define WGL_BLUE_SHIFT_ARB             0x201A
-#define WGL_ALPHA_BITS_ARB             0x201B
-#define WGL_ALPHA_SHIFT_ARB            0x201C
-#define WGL_ACCUM_BITS_ARB             0x201D
-#define WGL_ACCUM_RED_BITS_ARB         0x201E
-#define WGL_ACCUM_GREEN_BITS_ARB       0x201F
-#define WGL_ACCUM_BLUE_BITS_ARB        0x2020
-#define WGL_ACCUM_ALPHA_BITS_ARB       0x2021
-#define WGL_DEPTH_BITS_ARB             0x2022
-#define WGL_STENCIL_BITS_ARB           0x2023
-#define WGL_AUX_BUFFERS_ARB            0x2024
-#define WGL_NO_ACCELERATION_ARB        0x2025
-#define WGL_GENERIC_ACCELERATION_ARB   0x2026
-#define WGL_FULL_ACCELERATION_ARB      0x2027
-#define WGL_SWAP_EXCHANGE_ARB          0x2028
-#define WGL_SWAP_COPY_ARB              0x2029
-#define WGL_SWAP_UNDEFINED_ARB         0x202A
-#define WGL_TYPE_RGBA_ARB              0x202B
-#define WGL_TYPE_COLORINDEX_ARB        0x202C
-#endif
-
-#ifndef WGL_ARB_make_current_read
-#define ERROR_INVALID_PIXEL_TYPE_ARB   0x2043
-#define ERROR_INCOMPATIBLE_DEVICE_CONTEXTS_ARB 0x2054
-#endif
-
-#ifndef WGL_ARB_pbuffer
-#define WGL_DRAW_TO_PBUFFER_ARB        0x202D
-#define WGL_MAX_PBUFFER_PIXELS_ARB     0x202E
-#define WGL_MAX_PBUFFER_WIDTH_ARB      0x202F
-#define WGL_MAX_PBUFFER_HEIGHT_ARB     0x2030
-#define WGL_PBUFFER_LARGEST_ARB        0x2033
-#define WGL_PBUFFER_WIDTH_ARB          0x2034
-#define WGL_PBUFFER_HEIGHT_ARB         0x2035
-#define WGL_PBUFFER_LOST_ARB           0x2036
-#endif
-
-#ifndef WGL_ARB_render_texture
-#define WGL_BIND_TO_TEXTURE_RGB_ARB    0x2070
-#define WGL_BIND_TO_TEXTURE_RGBA_ARB   0x2071
-#define WGL_TEXTURE_FORMAT_ARB         0x2072
-#define WGL_TEXTURE_TARGET_ARB         0x2073
-#define WGL_MIPMAP_TEXTURE_ARB         0x2074
-#define WGL_TEXTURE_RGB_ARB            0x2075
-#define WGL_TEXTURE_RGBA_ARB           0x2076
-#define WGL_NO_TEXTURE_ARB             0x2077
-#define WGL_TEXTURE_CUBE_MAP_ARB       0x2078
-#define WGL_TEXTURE_1D_ARB             0x2079
-#define WGL_TEXTURE_2D_ARB             0x207A
-#define WGL_MIPMAP_LEVEL_ARB           0x207B
-#define WGL_CUBE_MAP_FACE_ARB          0x207C
-#define WGL_TEXTURE_CUBE_MAP_POSITIVE_X_ARB 0x207D
-#define WGL_TEXTURE_CUBE_MAP_NEGATIVE_X_ARB 0x207E
-#define WGL_TEXTURE_CUBE_MAP_POSITIVE_Y_ARB 0x207F
-#define WGL_TEXTURE_CUBE_MAP_NEGATIVE_Y_ARB 0x2080
-#define WGL_TEXTURE_CUBE_MAP_POSITIVE_Z_ARB 0x2081
-#define WGL_TEXTURE_CUBE_MAP_NEGATIVE_Z_ARB 0x2082
-#define WGL_FRONT_LEFT_ARB             0x2083
-#define WGL_FRONT_RIGHT_ARB            0x2084
-#define WGL_BACK_LEFT_ARB              0x2085
-#define WGL_BACK_RIGHT_ARB             0x2086
-#define WGL_AUX0_ARB                   0x2087
-#define WGL_AUX1_ARB                   0x2088
-#define WGL_AUX2_ARB                   0x2089
-#define WGL_AUX3_ARB                   0x208A
-#define WGL_AUX4_ARB                   0x208B
-#define WGL_AUX5_ARB                   0x208C
-#define WGL_AUX6_ARB                   0x208D
-#define WGL_AUX7_ARB                   0x208E
-#define WGL_AUX8_ARB                   0x208F
-#define WGL_AUX9_ARB                   0x2090
-#endif
-
-#ifndef WGL_ARB_pixel_format_float
-#define WGL_TYPE_RGBA_FLOAT_ARB        0x21A0
-#endif
-
-#ifndef WGL_ARB_framebuffer_sRGB
-#define WGL_FRAMEBUFFER_SRGB_CAPABLE_ARB 0x20A9
-#endif
-
-#ifndef WGL_ARB_create_context
-#define WGL_CONTEXT_DEBUG_BIT_ARB      0x00000001
-#define WGL_CONTEXT_FORWARD_COMPATIBLE_BIT_ARB 0x00000002
-#define WGL_CONTEXT_MAJOR_VERSION_ARB  0x2091
-#define WGL_CONTEXT_MINOR_VERSION_ARB  0x2092
-#define WGL_CONTEXT_LAYER_PLANE_ARB    0x2093
-#define WGL_CONTEXT_FLAGS_ARB          0x2094
-#define ERROR_INVALID_VERSION_ARB      0x2095
-#endif
-
-#ifndef WGL_ARB_create_context_profile
-#define WGL_CONTEXT_PROFILE_MASK_ARB   0x9126
-#define WGL_CONTEXT_CORE_PROFILE_BIT_ARB 0x00000001
-#define WGL_CONTEXT_COMPATIBILITY_PROFILE_BIT_ARB 0x00000002
-#define ERROR_INVALID_PROFILE_ARB      0x2096
-#endif
-
-#ifndef WGL_ARB_create_context_robustness
-#define WGL_CONTEXT_ROBUST_ACCESS_BIT_ARB 0x00000004
-#define WGL_LOSE_CONTEXT_ON_RESET_ARB  0x8252
-#define WGL_CONTEXT_RESET_NOTIFICATION_STRATEGY_ARB 0x8256
-#define WGL_NO_RESET_NOTIFICATION_ARB  0x8261
-#endif
-
-#ifndef WGL_EXT_make_current_read
-#define ERROR_INVALID_PIXEL_TYPE_EXT   0x2043
-#endif
-
-#ifndef WGL_EXT_pixel_format
-#define WGL_NUMBER_PIXEL_FORMATS_EXT   0x2000
-#define WGL_DRAW_TO_WINDOW_EXT         0x2001
-#define WGL_DRAW_TO_BITMAP_EXT         0x2002
-#define WGL_ACCELERATION_EXT           0x2003
-#define WGL_NEED_PALETTE_EXT           0x2004
-#define WGL_NEED_SYSTEM_PALETTE_EXT    0x2005
-#define WGL_SWAP_LAYER_BUFFERS_EXT     0x2006
-#define WGL_SWAP_METHOD_EXT            0x2007
-#define WGL_NUMBER_OVERLAYS_EXT        0x2008
-#define WGL_NUMBER_UNDERLAYS_EXT       0x2009
-#define WGL_TRANSPARENT_EXT            0x200A
-#define WGL_TRANSPARENT_VALUE_EXT      0x200B
-#define WGL_SHARE_DEPTH_EXT            0x200C
-#define WGL_SHARE_STENCIL_EXT          0x200D
-#define WGL_SHARE_ACCUM_EXT            0x200E
-#define WGL_SUPPORT_GDI_EXT            0x200F
-#define WGL_SUPPORT_OPENGL_EXT         0x2010
-#define WGL_DOUBLE_BUFFER_EXT          0x2011
-#define WGL_STEREO_EXT                 0x2012
-#define WGL_PIXEL_TYPE_EXT             0x2013
-#define WGL_COLOR_BITS_EXT             0x2014
-#define WGL_RED_BITS_EXT               0x2015
-#define WGL_RED_SHIFT_EXT              0x2016
-#define WGL_GREEN_BITS_EXT             0x2017
-#define WGL_GREEN_SHIFT_EXT            0x2018
-#define WGL_BLUE_BITS_EXT              0x2019
-#define WGL_BLUE_SHIFT_EXT             0x201A
-#define WGL_ALPHA_BITS_EXT             0x201B
-#define WGL_ALPHA_SHIFT_EXT            0x201C
-#define WGL_ACCUM_BITS_EXT             0x201D
-#define WGL_ACCUM_RED_BITS_EXT         0x201E
-#define WGL_ACCUM_GREEN_BITS_EXT       0x201F
-#define WGL_ACCUM_BLUE_BITS_EXT        0x2020
-#define WGL_ACCUM_ALPHA_BITS_EXT       0x2021
-#define WGL_DEPTH_BITS_EXT             0x2022
-#define WGL_STENCIL_BITS_EXT           0x2023
-#define WGL_AUX_BUFFERS_EXT            0x2024
-#define WGL_NO_ACCELERATION_EXT        0x2025
-#define WGL_GENERIC_ACCELERATION_EXT   0x2026
-#define WGL_FULL_ACCELERATION_EXT      0x2027
-#define WGL_SWAP_EXCHANGE_EXT          0x2028
-#define WGL_SWAP_COPY_EXT              0x2029
-#define WGL_SWAP_UNDEFINED_EXT         0x202A
-#define WGL_TYPE_RGBA_EXT              0x202B
-#define WGL_TYPE_COLORINDEX_EXT        0x202C
-#endif
-
-#ifndef WGL_EXT_pbuffer
-#define WGL_DRAW_TO_PBUFFER_EXT        0x202D
-#define WGL_MAX_PBUFFER_PIXELS_EXT     0x202E
-#define WGL_MAX_PBUFFER_WIDTH_EXT      0x202F
-#define WGL_MAX_PBUFFER_HEIGHT_EXT     0x2030
-#define WGL_OPTIMAL_PBUFFER_WIDTH_EXT  0x2031
-#define WGL_OPTIMAL_PBUFFER_HEIGHT_EXT 0x2032
-#define WGL_PBUFFER_LARGEST_EXT        0x2033
-#define WGL_PBUFFER_WIDTH_EXT          0x2034
-#define WGL_PBUFFER_HEIGHT_EXT         0x2035
-#endif
-
-#ifndef WGL_EXT_depth_float
-#define WGL_DEPTH_FLOAT_EXT            0x2040
-#endif
-
-#ifndef WGL_3DFX_multisample
-#define WGL_SAMPLE_BUFFERS_3DFX        0x2060
-#define WGL_SAMPLES_3DFX               0x2061
-#endif
-
-#ifndef WGL_EXT_multisample
-#define WGL_SAMPLE_BUFFERS_EXT         0x2041
-#define WGL_SAMPLES_EXT                0x2042
-#endif
-
-#ifndef WGL_I3D_digital_video_control
-#define WGL_DIGITAL_VIDEO_CURSOR_ALPHA_FRAMEBUFFER_I3D 0x2050
-#define WGL_DIGITAL_VIDEO_CURSOR_ALPHA_VALUE_I3D 0x2051
-#define WGL_DIGITAL_VIDEO_CURSOR_INCLUDED_I3D 0x2052
-#define WGL_DIGITAL_VIDEO_GAMMA_CORRECTED_I3D 0x2053
-#endif
-
-#ifndef WGL_I3D_gamma
-#define WGL_GAMMA_TABLE_SIZE_I3D       0x204E
-#define WGL_GAMMA_EXCLUDE_DESKTOP_I3D  0x204F
-#endif
-
-#ifndef WGL_I3D_genlock
-#define WGL_GENLOCK_SOURCE_MULTIVIEW_I3D 0x2044
-#define WGL_GENLOCK_SOURCE_EXTENAL_SYNC_I3D 0x2045
-#define WGL_GENLOCK_SOURCE_EXTENAL_FIELD_I3D 0x2046
-#define WGL_GENLOCK_SOURCE_EXTENAL_TTL_I3D 0x2047
-#define WGL_GENLOCK_SOURCE_DIGITAL_SYNC_I3D 0x2048
-#define WGL_GENLOCK_SOURCE_DIGITAL_FIELD_I3D 0x2049
-#define WGL_GENLOCK_SOURCE_EDGE_FALLING_I3D 0x204A
-#define WGL_GENLOCK_SOURCE_EDGE_RISING_I3D 0x204B
-#define WGL_GENLOCK_SOURCE_EDGE_BOTH_I3D 0x204C
-#endif
-
-#ifndef WGL_I3D_image_buffer
-#define WGL_IMAGE_BUFFER_MIN_ACCESS_I3D 0x00000001
-#define WGL_IMAGE_BUFFER_LOCK_I3D      0x00000002
-#endif
-
-#ifndef WGL_I3D_swap_frame_lock
-#endif
-
-#ifndef WGL_NV_render_depth_texture
-#define WGL_BIND_TO_TEXTURE_DEPTH_NV   0x20A3
-#define WGL_BIND_TO_TEXTURE_RECTANGLE_DEPTH_NV 0x20A4
-#define WGL_DEPTH_TEXTURE_FORMAT_NV    0x20A5
-#define WGL_TEXTURE_DEPTH_COMPONENT_NV 0x20A6
-#define WGL_DEPTH_COMPONENT_NV         0x20A7
-#endif
-
-#ifndef WGL_NV_render_texture_rectangle
-#define WGL_BIND_TO_TEXTURE_RECTANGLE_RGB_NV 0x20A0
-#define WGL_BIND_TO_TEXTURE_RECTANGLE_RGBA_NV 0x20A1
-#define WGL_TEXTURE_RECTANGLE_NV       0x20A2
-#endif
-
-#ifndef WGL_ATI_pixel_format_float
-#define WGL_TYPE_RGBA_FLOAT_ATI        0x21A0
-#endif
-
-#ifndef WGL_NV_float_buffer
-#define WGL_FLOAT_COMPONENTS_NV        0x20B0
-#define WGL_BIND_TO_TEXTURE_RECTANGLE_FLOAT_R_NV 0x20B1
-#define WGL_BIND_TO_TEXTURE_RECTANGLE_FLOAT_RG_NV 0x20B2
-#define WGL_BIND_TO_TEXTURE_RECTANGLE_FLOAT_RGB_NV 0x20B3
-#define WGL_BIND_TO_TEXTURE_RECTANGLE_FLOAT_RGBA_NV 0x20B4
-#define WGL_TEXTURE_FLOAT_R_NV         0x20B5
-#define WGL_TEXTURE_FLOAT_RG_NV        0x20B6
-#define WGL_TEXTURE_FLOAT_RGB_NV       0x20B7
-#define WGL_TEXTURE_FLOAT_RGBA_NV      0x20B8
-#endif
-
-#ifndef WGL_3DL_stereo_control
-#define WGL_STEREO_EMITTER_ENABLE_3DL  0x2055
-#define WGL_STEREO_EMITTER_DISABLE_3DL 0x2056
-#define WGL_STEREO_POLARITY_NORMAL_3DL 0x2057
-#define WGL_STEREO_POLARITY_INVERT_3DL 0x2058
-#endif
-
-#ifndef WGL_EXT_pixel_format_packed_float
-#define WGL_TYPE_RGBA_UNSIGNED_FLOAT_EXT 0x20A8
-#endif
-
-#ifndef WGL_EXT_framebuffer_sRGB
-#define WGL_FRAMEBUFFER_SRGB_CAPABLE_EXT 0x20A9
-#endif
-
-#ifndef WGL_NV_present_video
-#define WGL_NUM_VIDEO_SLOTS_NV         0x20F0
-#endif
-
-#ifndef WGL_NV_video_out
-#define WGL_BIND_TO_VIDEO_RGB_NV       0x20C0
-#define WGL_BIND_TO_VIDEO_RGBA_NV      0x20C1
-#define WGL_BIND_TO_VIDEO_RGB_AND_DEPTH_NV 0x20C2
-#define WGL_VIDEO_OUT_COLOR_NV         0x20C3
-#define WGL_VIDEO_OUT_ALPHA_NV         0x20C4
-#define WGL_VIDEO_OUT_DEPTH_NV         0x20C5
-#define WGL_VIDEO_OUT_COLOR_AND_ALPHA_NV 0x20C6
-#define WGL_VIDEO_OUT_COLOR_AND_DEPTH_NV 0x20C7
-#define WGL_VIDEO_OUT_FRAME            0x20C8
-#define WGL_VIDEO_OUT_FIELD_1          0x20C9
-#define WGL_VIDEO_OUT_FIELD_2          0x20CA
-#define WGL_VIDEO_OUT_STACKED_FIELDS_1_2 0x20CB
-#define WGL_VIDEO_OUT_STACKED_FIELDS_2_1 0x20CC
-#endif
-
-#ifndef WGL_NV_swap_group
-#endif
-
-#ifndef WGL_NV_gpu_affinity
-#define WGL_ERROR_INCOMPATIBLE_AFFINITY_MASKS_NV 0x20D0
-#define WGL_ERROR_MISSING_AFFINITY_MASK_NV 0x20D1
-#endif
-
-#ifndef WGL_AMD_gpu_association
-#define WGL_GPU_VENDOR_AMD             0x1F00
-#define WGL_GPU_RENDERER_STRING_AMD    0x1F01
-#define WGL_GPU_OPENGL_VERSION_STRING_AMD 0x1F02
-#define WGL_GPU_FASTEST_TARGET_GPUS_AMD 0x21A2
-#define WGL_GPU_RAM_AMD                0x21A3
-#define WGL_GPU_CLOCK_AMD              0x21A4
-#define WGL_GPU_NUM_PIPES_AMD          0x21A5
-#define WGL_GPU_NUM_SIMD_AMD           0x21A6
-#define WGL_GPU_NUM_RB_AMD             0x21A7
-#define WGL_GPU_NUM_SPI_AMD            0x21A8
-#endif
-
-#ifndef WGL_NV_video_capture
-#define WGL_UNIQUE_ID_NV               0x20CE
-#define WGL_NUM_VIDEO_CAPTURE_SLOTS_NV 0x20CF
-#endif
-
-#ifndef WGL_NV_copy_image
-#endif
-
-#ifndef WGL_NV_multisample_coverage
-#define WGL_COVERAGE_SAMPLES_NV        0x2042
-#define WGL_COLOR_SAMPLES_NV           0x20B9
-#endif
-
-#ifndef WGL_EXT_create_context_es2_profile
-#define WGL_CONTEXT_ES2_PROFILE_BIT_EXT 0x00000004
-#endif
-
-
-/*************************************************************/
-
-#ifndef WGL_ARB_pbuffer
-DECLARE_HANDLE(HPBUFFERARB);
-#endif
-#ifndef WGL_EXT_pbuffer
-DECLARE_HANDLE(HPBUFFEREXT);
-#endif
-#ifndef WGL_NV_present_video
-DECLARE_HANDLE(HVIDEOOUTPUTDEVICENV);
-#endif
-#ifndef WGL_NV_video_output
-DECLARE_HANDLE(HPVIDEODEV);
-#endif
-#ifndef WGL_NV_gpu_affinity
-DECLARE_HANDLE(HPGPUNV);
-DECLARE_HANDLE(HGPUNV);
-
-typedef struct _GPU_DEVICE {
-    DWORD  cb;
-    CHAR   DeviceName[32];
-    CHAR   DeviceString[128];
-    DWORD  Flags;
-    RECT   rcVirtualScreen;
-} GPU_DEVICE, *PGPU_DEVICE;
-#endif
-#ifndef WGL_NV_video_capture
-DECLARE_HANDLE(HVIDEOINPUTDEVICENV);
-#endif
-
-#ifndef WGL_ARB_buffer_region
-#define WGL_ARB_buffer_region 1
-#ifdef WGL_WGLEXT_PROTOTYPES
-extern HANDLE WINAPI wglCreateBufferRegionARB (HDC hDC, int iLayerPlane, UINT uType);
-extern VOID WINAPI wglDeleteBufferRegionARB (HANDLE hRegion);
-extern BOOL WINAPI wglSaveBufferRegionARB (HANDLE hRegion, int x, int y, int width, int height);
-extern BOOL WINAPI wglRestoreBufferRegionARB (HANDLE hRegion, int x, int y, int width, int height, int xSrc, int ySrc);
-#endif /* WGL_WGLEXT_PROTOTYPES */
-typedef HANDLE (WINAPI * PFNWGLCREATEBUFFERREGIONARBPROC) (HDC hDC, int iLayerPlane, UINT uType);
-typedef VOID (WINAPI * PFNWGLDELETEBUFFERREGIONARBPROC) (HANDLE hRegion);
-typedef BOOL (WINAPI * PFNWGLSAVEBUFFERREGIONARBPROC) (HANDLE hRegion, int x, int y, int width, int height);
-typedef BOOL (WINAPI * PFNWGLRESTOREBUFFERREGIONARBPROC) (HANDLE hRegion, int x, int y, int width, int height, int xSrc, int ySrc);
-#endif
-
-#ifndef WGL_ARB_multisample
-#define WGL_ARB_multisample 1
-#endif
-
-#ifndef WGL_ARB_extensions_string
-#define WGL_ARB_extensions_string 1
-#ifdef WGL_WGLEXT_PROTOTYPES
-extern const char * WINAPI wglGetExtensionsStringARB (HDC hdc);
-#endif /* WGL_WGLEXT_PROTOTYPES */
-typedef const char * (WINAPI * PFNWGLGETEXTENSIONSSTRINGARBPROC) (HDC hdc);
-#endif
-
-#ifndef WGL_ARB_pixel_format
-#define WGL_ARB_pixel_format 1
-#ifdef WGL_WGLEXT_PROTOTYPES
-extern BOOL WINAPI wglGetPixelFormatAttribivARB (HDC hdc, int iPixelFormat, int iLayerPlane, UINT nAttributes, const int *piAttributes, int *piValues);
-extern BOOL WINAPI wglGetPixelFormatAttribfvARB (HDC hdc, int iPixelFormat, int iLayerPlane, UINT nAttributes, const int *piAttributes, FLOAT *pfValues);
-extern BOOL WINAPI wglChoosePixelFormatARB (HDC hdc, const int *piAttribIList, const FLOAT *pfAttribFList, UINT nMaxFormats, int *piFormats, UINT *nNumFormats);
-#endif /* WGL_WGLEXT_PROTOTYPES */
-typedef BOOL (WINAPI * PFNWGLGETPIXELFORMATATTRIBIVARBPROC) (HDC hdc, int iPixelFormat, int iLayerPlane, UINT nAttributes, const int *piAttributes, int *piValues);
-typedef BOOL (WINAPI * PFNWGLGETPIXELFORMATATTRIBFVARBPROC) (HDC hdc, int iPixelFormat, int iLayerPlane, UINT nAttributes, const int *piAttributes, FLOAT *pfValues);
-typedef BOOL (WINAPI * PFNWGLCHOOSEPIXELFORMATARBPROC) (HDC hdc, const int *piAttribIList, const FLOAT *pfAttribFList, UINT nMaxFormats, int *piFormats, UINT *nNumFormats);
-#endif
-
-#ifndef WGL_ARB_make_current_read
-#define WGL_ARB_make_current_read 1
-#ifdef WGL_WGLEXT_PROTOTYPES
-extern BOOL WINAPI wglMakeContextCurrentARB (HDC hDrawDC, HDC hReadDC, HGLRC hglrc);
-extern HDC WINAPI wglGetCurrentReadDCARB (void);
-#endif /* WGL_WGLEXT_PROTOTYPES */
-typedef BOOL (WINAPI * PFNWGLMAKECONTEXTCURRENTARBPROC) (HDC hDrawDC, HDC hReadDC, HGLRC hglrc);
-typedef HDC (WINAPI * PFNWGLGETCURRENTREADDCARBPROC) (void);
-#endif
-
-#ifndef WGL_ARB_pbuffer
-#define WGL_ARB_pbuffer 1
-#ifdef WGL_WGLEXT_PROTOTYPES
-extern HPBUFFERARB WINAPI wglCreatePbufferARB (HDC hDC, int iPixelFormat, int iWidth, int iHeight, const int *piAttribList);
-extern HDC WINAPI wglGetPbufferDCARB (HPBUFFERARB hPbuffer);
-extern int WINAPI wglReleasePbufferDCARB (HPBUFFERARB hPbuffer, HDC hDC);
-extern BOOL WINAPI wglDestroyPbufferARB (HPBUFFERARB hPbuffer);
-extern BOOL WINAPI wglQueryPbufferARB (HPBUFFERARB hPbuffer, int iAttribute, int *piValue);
-#endif /* WGL_WGLEXT_PROTOTYPES */
-typedef HPBUFFERARB (WINAPI * PFNWGLCREATEPBUFFERARBPROC) (HDC hDC, int iPixelFormat, int iWidth, int iHeight, const int *piAttribList);
-typedef HDC (WINAPI * PFNWGLGETPBUFFERDCARBPROC) (HPBUFFERARB hPbuffer);
-typedef int (WINAPI * PFNWGLRELEASEPBUFFERDCARBPROC) (HPBUFFERARB hPbuffer, HDC hDC);
-typedef BOOL (WINAPI * PFNWGLDESTROYPBUFFERARBPROC) (HPBUFFERARB hPbuffer);
-typedef BOOL (WINAPI * PFNWGLQUERYPBUFFERARBPROC) (HPBUFFERARB hPbuffer, int iAttribute, int *piValue);
-#endif
-
-#ifndef WGL_ARB_render_texture
-#define WGL_ARB_render_texture 1
-#ifdef WGL_WGLEXT_PROTOTYPES
-extern BOOL WINAPI wglBindTexImageARB (HPBUFFERARB hPbuffer, int iBuffer);
-extern BOOL WINAPI wglReleaseTexImageARB (HPBUFFERARB hPbuffer, int iBuffer);
-extern BOOL WINAPI wglSetPbufferAttribARB (HPBUFFERARB hPbuffer, const int *piAttribList);
-#endif /* WGL_WGLEXT_PROTOTYPES */
-typedef BOOL (WINAPI * PFNWGLBINDTEXIMAGEARBPROC) (HPBUFFERARB hPbuffer, int iBuffer);
-typedef BOOL (WINAPI * PFNWGLRELEASETEXIMAGEARBPROC) (HPBUFFERARB hPbuffer, int iBuffer);
-typedef BOOL (WINAPI * PFNWGLSETPBUFFERATTRIBARBPROC) (HPBUFFERARB hPbuffer, const int *piAttribList);
-#endif
-
-#ifndef WGL_ARB_pixel_format_float
-#define WGL_ARB_pixel_format_float 1
-#endif
-
-#ifndef WGL_ARB_framebuffer_sRGB
-#define WGL_ARB_framebuffer_sRGB 1
-#endif
-
-#ifndef WGL_ARB_create_context
-#define WGL_ARB_create_context 1
-#ifdef WGL_WGLEXT_PROTOTYPES
-extern HGLRC WINAPI wglCreateContextAttribsARB (HDC hDC, HGLRC hShareContext, const int *attribList);
-#endif /* WGL_WGLEXT_PROTOTYPES */
-typedef HGLRC (WINAPI * PFNWGLCREATECONTEXTATTRIBSARBPROC) (HDC hDC, HGLRC hShareContext, const int *attribList);
-#endif
-
-#ifndef WGL_ARB_create_context_profile
-#define WGL_ARB_create_context_profile 1
-#endif
-
-#ifndef WGL_ARB_create_context_robustness
-#define WGL_ARB_create_context_robustness 1
-#endif
-
-#ifndef WGL_EXT_display_color_table
-#define WGL_EXT_display_color_table 1
-#ifdef WGL_WGLEXT_PROTOTYPES
-extern GLboolean WINAPI wglCreateDisplayColorTableEXT (GLushort id);
-extern GLboolean WINAPI wglLoadDisplayColorTableEXT (const GLushort *table, GLuint length);
-extern GLboolean WINAPI wglBindDisplayColorTableEXT (GLushort id);
-extern VOID WINAPI wglDestroyDisplayColorTableEXT (GLushort id);
-#endif /* WGL_WGLEXT_PROTOTYPES */
-typedef GLboolean (WINAPI * PFNWGLCREATEDISPLAYCOLORTABLEEXTPROC) (GLushort id);
-typedef GLboolean (WINAPI * PFNWGLLOADDISPLAYCOLORTABLEEXTPROC) (const GLushort *table, GLuint length);
-typedef GLboolean (WINAPI * PFNWGLBINDDISPLAYCOLORTABLEEXTPROC) (GLushort id);
-typedef VOID (WINAPI * PFNWGLDESTROYDISPLAYCOLORTABLEEXTPROC) (GLushort id);
-#endif
-
-#ifndef WGL_EXT_extensions_string
-#define WGL_EXT_extensions_string 1
-#ifdef WGL_WGLEXT_PROTOTYPES
-extern const char * WINAPI wglGetExtensionsStringEXT (void);
-#endif /* WGL_WGLEXT_PROTOTYPES */
-typedef const char * (WINAPI * PFNWGLGETEXTENSIONSSTRINGEXTPROC) (void);
-#endif
-
-#ifndef WGL_EXT_make_current_read
-#define WGL_EXT_make_current_read 1
-#ifdef WGL_WGLEXT_PROTOTYPES
-extern BOOL WINAPI wglMakeContextCurrentEXT (HDC hDrawDC, HDC hReadDC, HGLRC hglrc);
-extern HDC WINAPI wglGetCurrentReadDCEXT (void);
-#endif /* WGL_WGLEXT_PROTOTYPES */
-typedef BOOL (WINAPI * PFNWGLMAKECONTEXTCURRENTEXTPROC) (HDC hDrawDC, HDC hReadDC, HGLRC hglrc);
-typedef HDC (WINAPI * PFNWGLGETCURRENTREADDCEXTPROC) (void);
-#endif
-
-#ifndef WGL_EXT_pbuffer
-#define WGL_EXT_pbuffer 1
-#ifdef WGL_WGLEXT_PROTOTYPES
-extern HPBUFFEREXT WINAPI wglCreatePbufferEXT (HDC hDC, int iPixelFormat, int iWidth, int iHeight, const int *piAttribList);
-extern HDC WINAPI wglGetPbufferDCEXT (HPBUFFEREXT hPbuffer);
-extern int WINAPI wglReleasePbufferDCEXT (HPBUFFEREXT hPbuffer, HDC hDC);
-extern BOOL WINAPI wglDestroyPbufferEXT (HPBUFFEREXT hPbuffer);
-extern BOOL WINAPI wglQueryPbufferEXT (HPBUFFEREXT hPbuffer, int iAttribute, int *piValue);
-#endif /* WGL_WGLEXT_PROTOTYPES */
-typedef HPBUFFEREXT (WINAPI * PFNWGLCREATEPBUFFEREXTPROC) (HDC hDC, int iPixelFormat, int iWidth, int iHeight, const int *piAttribList);
-typedef HDC (WINAPI * PFNWGLGETPBUFFERDCEXTPROC) (HPBUFFEREXT hPbuffer);
-typedef int (WINAPI * PFNWGLRELEASEPBUFFERDCEXTPROC) (HPBUFFEREXT hPbuffer, HDC hDC);
-typedef BOOL (WINAPI * PFNWGLDESTROYPBUFFEREXTPROC) (HPBUFFEREXT hPbuffer);
-typedef BOOL (WINAPI * PFNWGLQUERYPBUFFEREXTPROC) (HPBUFFEREXT hPbuffer, int iAttribute, int *piValue);
-#endif
-
-#ifndef WGL_EXT_pixel_format
-#define WGL_EXT_pixel_format 1
-#ifdef WGL_WGLEXT_PROTOTYPES
-extern BOOL WINAPI wglGetPixelFormatAttribivEXT (HDC hdc, int iPixelFormat, int iLayerPlane, UINT nAttributes, int *piAttributes, int *piValues);
-extern BOOL WINAPI wglGetPixelFormatAttribfvEXT (HDC hdc, int iPixelFormat, int iLayerPlane, UINT nAttributes, int *piAttributes, FLOAT *pfValues);
-extern BOOL WINAPI wglChoosePixelFormatEXT (HDC hdc, const int *piAttribIList, const FLOAT *pfAttribFList, UINT nMaxFormats, int *piFormats, UINT *nNumFormats);
-#endif /* WGL_WGLEXT_PROTOTYPES */
-typedef BOOL (WINAPI * PFNWGLGETPIXELFORMATATTRIBIVEXTPROC) (HDC hdc, int iPixelFormat, int iLayerPlane, UINT nAttributes, int *piAttributes, int *piValues);
-typedef BOOL (WINAPI * PFNWGLGETPIXELFORMATATTRIBFVEXTPROC) (HDC hdc, int iPixelFormat, int iLayerPlane, UINT nAttributes, int *piAttributes, FLOAT *pfValues);
-typedef BOOL (WINAPI * PFNWGLCHOOSEPIXELFORMATEXTPROC) (HDC hdc, const int *piAttribIList, const FLOAT *pfAttribFList, UINT nMaxFormats, int *piFormats, UINT *nNumFormats);
-#endif
-
-#ifndef WGL_EXT_swap_control
-#define WGL_EXT_swap_control 1
-#ifdef WGL_WGLEXT_PROTOTYPES
-extern BOOL WINAPI wglSwapIntervalEXT (int interval);
-extern int WINAPI wglGetSwapIntervalEXT (void);
-#endif /* WGL_WGLEXT_PROTOTYPES */
-typedef BOOL (WINAPI * PFNWGLSWAPINTERVALEXTPROC) (int interval);
-typedef int (WINAPI * PFNWGLGETSWAPINTERVALEXTPROC) (void);
-#endif
-
-#ifndef WGL_EXT_depth_float
-#define WGL_EXT_depth_float 1
-#endif
-
-#ifndef WGL_NV_vertex_array_range
-#define WGL_NV_vertex_array_range 1
-#ifdef WGL_WGLEXT_PROTOTYPES
-extern void* WINAPI wglAllocateMemoryNV (GLsizei size, GLfloat readfreq, GLfloat writefreq, GLfloat priority);
-extern void WINAPI wglFreeMemoryNV (void *pointer);
-#endif /* WGL_WGLEXT_PROTOTYPES */
-typedef void* (WINAPI * PFNWGLALLOCATEMEMORYNVPROC) (GLsizei size, GLfloat readfreq, GLfloat writefreq, GLfloat priority);
-typedef void (WINAPI * PFNWGLFREEMEMORYNVPROC) (void *pointer);
-#endif
-
-#ifndef WGL_3DFX_multisample
-#define WGL_3DFX_multisample 1
-#endif
-
-#ifndef WGL_EXT_multisample
-#define WGL_EXT_multisample 1
-#endif
-
-#ifndef WGL_OML_sync_control
-#define WGL_OML_sync_control 1
-#ifdef WGL_WGLEXT_PROTOTYPES
-extern BOOL WINAPI wglGetSyncValuesOML (HDC hdc, INT64 *ust, INT64 *msc, INT64 *sbc);
-extern BOOL WINAPI wglGetMscRateOML (HDC hdc, INT32 *numerator, INT32 *denominator);
-extern INT64 WINAPI wglSwapBuffersMscOML (HDC hdc, INT64 target_msc, INT64 divisor, INT64 remainder);
-extern INT64 WINAPI wglSwapLayerBuffersMscOML (HDC hdc, int fuPlanes, INT64 target_msc, INT64 divisor, INT64 remainder);
-extern BOOL WINAPI wglWaitForMscOML (HDC hdc, INT64 target_msc, INT64 divisor, INT64 remainder, INT64 *ust, INT64 *msc, INT64 *sbc);
-extern BOOL WINAPI wglWaitForSbcOML (HDC hdc, INT64 target_sbc, INT64 *ust, INT64 *msc, INT64 *sbc);
-#endif /* WGL_WGLEXT_PROTOTYPES */
-typedef BOOL (WINAPI * PFNWGLGETSYNCVALUESOMLPROC) (HDC hdc, INT64 *ust, INT64 *msc, INT64 *sbc);
-typedef BOOL (WINAPI * PFNWGLGETMSCRATEOMLPROC) (HDC hdc, INT32 *numerator, INT32 *denominator);
-typedef INT64 (WINAPI * PFNWGLSWAPBUFFERSMSCOMLPROC) (HDC hdc, INT64 target_msc, INT64 divisor, INT64 remainder);
-typedef INT64 (WINAPI * PFNWGLSWAPLAYERBUFFERSMSCOMLPROC) (HDC hdc, int fuPlanes, INT64 target_msc, INT64 divisor, INT64 remainder);
-typedef BOOL (WINAPI * PFNWGLWAITFORMSCOMLPROC) (HDC hdc, INT64 target_msc, INT64 divisor, INT64 remainder, INT64 *ust, INT64 *msc, INT64 *sbc);
-typedef BOOL (WINAPI * PFNWGLWAITFORSBCOMLPROC) (HDC hdc, INT64 target_sbc, INT64 *ust, INT64 *msc, INT64 *sbc);
-#endif
-
-#ifndef WGL_I3D_digital_video_control
-#define WGL_I3D_digital_video_control 1
-#ifdef WGL_WGLEXT_PROTOTYPES
-extern BOOL WINAPI wglGetDigitalVideoParametersI3D (HDC hDC, int iAttribute, int *piValue);
-extern BOOL WINAPI wglSetDigitalVideoParametersI3D (HDC hDC, int iAttribute, const int *piValue);
-#endif /* WGL_WGLEXT_PROTOTYPES */
-typedef BOOL (WINAPI * PFNWGLGETDIGITALVIDEOPARAMETERSI3DPROC) (HDC hDC, int iAttribute, int *piValue);
-typedef BOOL (WINAPI * PFNWGLSETDIGITALVIDEOPARAMETERSI3DPROC) (HDC hDC, int iAttribute, const int *piValue);
-#endif
-
-#ifndef WGL_I3D_gamma
-#define WGL_I3D_gamma 1
-#ifdef WGL_WGLEXT_PROTOTYPES
-extern BOOL WINAPI wglGetGammaTableParametersI3D (HDC hDC, int iAttribute, int *piValue);
-extern BOOL WINAPI wglSetGammaTableParametersI3D (HDC hDC, int iAttribute, const int *piValue);
-extern BOOL WINAPI wglGetGammaTableI3D (HDC hDC, int iEntries, USHORT *puRed, USHORT *puGreen, USHORT *puBlue);
-extern BOOL WINAPI wglSetGammaTableI3D (HDC hDC, int iEntries, const USHORT *puRed, const USHORT *puGreen, const USHORT *puBlue);
-#endif /* WGL_WGLEXT_PROTOTYPES */
-typedef BOOL (WINAPI * PFNWGLGETGAMMATABLEPARAMETERSI3DPROC) (HDC hDC, int iAttribute, int *piValue);
-typedef BOOL (WINAPI * PFNWGLSETGAMMATABLEPARAMETERSI3DPROC) (HDC hDC, int iAttribute, const int *piValue);
-typedef BOOL (WINAPI * PFNWGLGETGAMMATABLEI3DPROC) (HDC hDC, int iEntries, USHORT *puRed, USHORT *puGreen, USHORT *puBlue);
-typedef BOOL (WINAPI * PFNWGLSETGAMMATABLEI3DPROC) (HDC hDC, int iEntries, const USHORT *puRed, const USHORT *puGreen, const USHORT *puBlue);
-#endif
-
-#ifndef WGL_I3D_genlock
-#define WGL_I3D_genlock 1
-#ifdef WGL_WGLEXT_PROTOTYPES
-extern BOOL WINAPI wglEnableGenlockI3D (HDC hDC);
-extern BOOL WINAPI wglDisableGenlockI3D (HDC hDC);
-extern BOOL WINAPI wglIsEnabledGenlockI3D (HDC hDC, BOOL *pFlag);
-extern BOOL WINAPI wglGenlockSourceI3D (HDC hDC, UINT uSource);
-extern BOOL WINAPI wglGetGenlockSourceI3D (HDC hDC, UINT *uSource);
-extern BOOL WINAPI wglGenlockSourceEdgeI3D (HDC hDC, UINT uEdge);
-extern BOOL WINAPI wglGetGenlockSourceEdgeI3D (HDC hDC, UINT *uEdge);
-extern BOOL WINAPI wglGenlockSampleRateI3D (HDC hDC, UINT uRate);
-extern BOOL WINAPI wglGetGenlockSampleRateI3D (HDC hDC, UINT *uRate);
-extern BOOL WINAPI wglGenlockSourceDelayI3D (HDC hDC, UINT uDelay);
-extern BOOL WINAPI wglGetGenlockSourceDelayI3D (HDC hDC, UINT *uDelay);
-extern BOOL WINAPI wglQueryGenlockMaxSourceDelayI3D (HDC hDC, UINT *uMaxLineDelay, UINT *uMaxPixelDelay);
-#endif /* WGL_WGLEXT_PROTOTYPES */
-typedef BOOL (WINAPI * PFNWGLENABLEGENLOCKI3DPROC) (HDC hDC);
-typedef BOOL (WINAPI * PFNWGLDISABLEGENLOCKI3DPROC) (HDC hDC);
-typedef BOOL (WINAPI * PFNWGLISENABLEDGENLOCKI3DPROC) (HDC hDC, BOOL *pFlag);
-typedef BOOL (WINAPI * PFNWGLGENLOCKSOURCEI3DPROC) (HDC hDC, UINT uSource);
-typedef BOOL (WINAPI * PFNWGLGETGENLOCKSOURCEI3DPROC) (HDC hDC, UINT *uSource);
-typedef BOOL (WINAPI * PFNWGLGENLOCKSOURCEEDGEI3DPROC) (HDC hDC, UINT uEdge);
-typedef BOOL (WINAPI * PFNWGLGETGENLOCKSOURCEEDGEI3DPROC) (HDC hDC, UINT *uEdge);
-typedef BOOL (WINAPI * PFNWGLGENLOCKSAMPLERATEI3DPROC) (HDC hDC, UINT uRate);
-typedef BOOL (WINAPI * PFNWGLGETGENLOCKSAMPLERATEI3DPROC) (HDC hDC, UINT *uRate);
-typedef BOOL (WINAPI * PFNWGLGENLOCKSOURCEDELAYI3DPROC) (HDC hDC, UINT uDelay);
-typedef BOOL (WINAPI * PFNWGLGETGENLOCKSOURCEDELAYI3DPROC) (HDC hDC, UINT *uDelay);
-typedef BOOL (WINAPI * PFNWGLQUERYGENLOCKMAXSOURCEDELAYI3DPROC) (HDC hDC, UINT *uMaxLineDelay, UINT *uMaxPixelDelay);
-#endif
-
-#ifndef WGL_I3D_image_buffer
-#define WGL_I3D_image_buffer 1
-#ifdef WGL_WGLEXT_PROTOTYPES
-extern LPVOID WINAPI wglCreateImageBufferI3D (HDC hDC, DWORD dwSize, UINT uFlags);
-extern BOOL WINAPI wglDestroyImageBufferI3D (HDC hDC, LPVOID pAddress);
-extern BOOL WINAPI wglAssociateImageBufferEventsI3D (HDC hDC, const HANDLE *pEvent, const LPVOID *pAddress, const DWORD *pSize, UINT count);
-extern BOOL WINAPI wglReleaseImageBufferEventsI3D (HDC hDC, const LPVOID *pAddress, UINT count);
-#endif /* WGL_WGLEXT_PROTOTYPES */
-typedef LPVOID (WINAPI * PFNWGLCREATEIMAGEBUFFERI3DPROC) (HDC hDC, DWORD dwSize, UINT uFlags);
-typedef BOOL (WINAPI * PFNWGLDESTROYIMAGEBUFFERI3DPROC) (HDC hDC, LPVOID pAddress);
-typedef BOOL (WINAPI * PFNWGLASSOCIATEIMAGEBUFFEREVENTSI3DPROC) (HDC hDC, const HANDLE *pEvent, const LPVOID *pAddress, const DWORD *pSize, UINT count);
-typedef BOOL (WINAPI * PFNWGLRELEASEIMAGEBUFFEREVENTSI3DPROC) (HDC hDC, const LPVOID *pAddress, UINT count);
-#endif
-
-#ifndef WGL_I3D_swap_frame_lock
-#define WGL_I3D_swap_frame_lock 1
-#ifdef WGL_WGLEXT_PROTOTYPES
-extern BOOL WINAPI wglEnableFrameLockI3D (void);
-extern BOOL WINAPI wglDisableFrameLockI3D (void);
-extern BOOL WINAPI wglIsEnabledFrameLockI3D (BOOL *pFlag);
-extern BOOL WINAPI wglQueryFrameLockMasterI3D (BOOL *pFlag);
-#endif /* WGL_WGLEXT_PROTOTYPES */
-typedef BOOL (WINAPI * PFNWGLENABLEFRAMELOCKI3DPROC) (void);
-typedef BOOL (WINAPI * PFNWGLDISABLEFRAMELOCKI3DPROC) (void);
-typedef BOOL (WINAPI * PFNWGLISENABLEDFRAMELOCKI3DPROC) (BOOL *pFlag);
-typedef BOOL (WINAPI * PFNWGLQUERYFRAMELOCKMASTERI3DPROC) (BOOL *pFlag);
-#endif
-
-#ifndef WGL_I3D_swap_frame_usage
-#define WGL_I3D_swap_frame_usage 1
-#ifdef WGL_WGLEXT_PROTOTYPES
-extern BOOL WINAPI wglGetFrameUsageI3D (float *pUsage);
-extern BOOL WINAPI wglBeginFrameTrackingI3D (void);
-extern BOOL WINAPI wglEndFrameTrackingI3D (void);
-extern BOOL WINAPI wglQueryFrameTrackingI3D (DWORD *pFrameCount, DWORD *pMissedFrames, float *pLastMissedUsage);
-#endif /* WGL_WGLEXT_PROTOTYPES */
-typedef BOOL (WINAPI * PFNWGLGETFRAMEUSAGEI3DPROC) (float *pUsage);
-typedef BOOL (WINAPI * PFNWGLBEGINFRAMETRACKINGI3DPROC) (void);
-typedef BOOL (WINAPI * PFNWGLENDFRAMETRACKINGI3DPROC) (void);
-typedef BOOL (WINAPI * PFNWGLQUERYFRAMETRACKINGI3DPROC) (DWORD *pFrameCount, DWORD *pMissedFrames, float *pLastMissedUsage);
-#endif
-
-#ifndef WGL_ATI_pixel_format_float
-#define WGL_ATI_pixel_format_float 1
-#endif
-
-#ifndef WGL_NV_float_buffer
-#define WGL_NV_float_buffer 1
-#endif
-
-#ifndef WGL_3DL_stereo_control
-#define WGL_3DL_stereo_control 1
-#ifdef WGL_WGLEXT_PROTOTYPES
-extern BOOL WINAPI wglSetStereoEmitterState3DL (HDC hDC, UINT uState);
-#endif /* WGL_WGLEXT_PROTOTYPES */
-typedef BOOL (WINAPI * PFNWGLSETSTEREOEMITTERSTATE3DLPROC) (HDC hDC, UINT uState);
-#endif
-
-#ifndef WGL_EXT_pixel_format_packed_float
-#define WGL_EXT_pixel_format_packed_float 1
-#endif
-
-#ifndef WGL_EXT_framebuffer_sRGB
-#define WGL_EXT_framebuffer_sRGB 1
-#endif
-
-#ifndef WGL_NV_present_video
-#define WGL_NV_present_video 1
-#ifdef WGL_WGLEXT_PROTOTYPES
-extern int WINAPI wglEnumerateVideoDevicesNV (HDC hDC, HVIDEOOUTPUTDEVICENV *phDeviceList);
-extern BOOL WINAPI wglBindVideoDeviceNV (HDC hDC, unsigned int uVideoSlot, HVIDEOOUTPUTDEVICENV hVideoDevice, const int *piAttribList);
-extern BOOL WINAPI wglQueryCurrentContextNV (int iAttribute, int *piValue);
-#endif /* WGL_WGLEXT_PROTOTYPES */
-typedef int (WINAPI * PFNWGLENUMERATEVIDEODEVICESNVPROC) (HDC hDC, HVIDEOOUTPUTDEVICENV *phDeviceList);
-typedef BOOL (WINAPI * PFNWGLBINDVIDEODEVICENVPROC) (HDC hDC, unsigned int uVideoSlot, HVIDEOOUTPUTDEVICENV hVideoDevice, const int *piAttribList);
-typedef BOOL (WINAPI * PFNWGLQUERYCURRENTCONTEXTNVPROC) (int iAttribute, int *piValue);
-#endif
-
-#ifndef WGL_NV_video_output
-#define WGL_NV_video_output 1
-#ifdef WGL_WGLEXT_PROTOTYPES
-extern BOOL WINAPI wglGetVideoDeviceNV (HDC hDC, int numDevices, HPVIDEODEV *hVideoDevice);
-extern BOOL WINAPI wglReleaseVideoDeviceNV (HPVIDEODEV hVideoDevice);
-extern BOOL WINAPI wglBindVideoImageNV (HPVIDEODEV hVideoDevice, HPBUFFERARB hPbuffer, int iVideoBuffer);
-extern BOOL WINAPI wglReleaseVideoImageNV (HPBUFFERARB hPbuffer, int iVideoBuffer);
-extern BOOL WINAPI wglSendPbufferToVideoNV (HPBUFFERARB hPbuffer, int iBufferType, unsigned long *pulCounterPbuffer, BOOL bBlock);
-extern BOOL WINAPI wglGetVideoInfoNV (HPVIDEODEV hpVideoDevice, unsigned long *pulCounterOutputPbuffer, unsigned long *pulCounterOutputVideo);
-#endif /* WGL_WGLEXT_PROTOTYPES */
-typedef BOOL (WINAPI * PFNWGLGETVIDEODEVICENVPROC) (HDC hDC, int numDevices, HPVIDEODEV *hVideoDevice);
-typedef BOOL (WINAPI * PFNWGLRELEASEVIDEODEVICENVPROC) (HPVIDEODEV hVideoDevice);
-typedef BOOL (WINAPI * PFNWGLBINDVIDEOIMAGENVPROC) (HPVIDEODEV hVideoDevice, HPBUFFERARB hPbuffer, int iVideoBuffer);
-typedef BOOL (WINAPI * PFNWGLRELEASEVIDEOIMAGENVPROC) (HPBUFFERARB hPbuffer, int iVideoBuffer);
-typedef BOOL (WINAPI * PFNWGLSENDPBUFFERTOVIDEONVPROC) (HPBUFFERARB hPbuffer, int iBufferType, unsigned long *pulCounterPbuffer, BOOL bBlock);
-typedef BOOL (WINAPI * PFNWGLGETVIDEOINFONVPROC) (HPVIDEODEV hpVideoDevice, unsigned long *pulCounterOutputPbuffer, unsigned long *pulCounterOutputVideo);
-#endif
-
-#ifndef WGL_NV_swap_group
-#define WGL_NV_swap_group 1
-#ifdef WGL_WGLEXT_PROTOTYPES
-extern BOOL WINAPI wglJoinSwapGroupNV (HDC hDC, GLuint group);
-extern BOOL WINAPI wglBindSwapBarrierNV (GLuint group, GLuint barrier);
-extern BOOL WINAPI wglQuerySwapGroupNV (HDC hDC, GLuint *group, GLuint *barrier);
-extern BOOL WINAPI wglQueryMaxSwapGroupsNV (HDC hDC, GLuint *maxGroups, GLuint *maxBarriers);
-extern BOOL WINAPI wglQueryFrameCountNV (HDC hDC, GLuint *count);
-extern BOOL WINAPI wglResetFrameCountNV (HDC hDC);
-#endif /* WGL_WGLEXT_PROTOTYPES */
-typedef BOOL (WINAPI * PFNWGLJOINSWAPGROUPNVPROC) (HDC hDC, GLuint group);
-typedef BOOL (WINAPI * PFNWGLBINDSWAPBARRIERNVPROC) (GLuint group, GLuint barrier);
-typedef BOOL (WINAPI * PFNWGLQUERYSWAPGROUPNVPROC) (HDC hDC, GLuint *group, GLuint *barrier);
-typedef BOOL (WINAPI * PFNWGLQUERYMAXSWAPGROUPSNVPROC) (HDC hDC, GLuint *maxGroups, GLuint *maxBarriers);
-typedef BOOL (WINAPI * PFNWGLQUERYFRAMECOUNTNVPROC) (HDC hDC, GLuint *count);
-typedef BOOL (WINAPI * PFNWGLRESETFRAMECOUNTNVPROC) (HDC hDC);
-#endif
-
-#ifndef WGL_NV_gpu_affinity
-#define WGL_NV_gpu_affinity 1
-#ifdef WGL_WGLEXT_PROTOTYPES
-extern BOOL WINAPI wglEnumGpusNV (UINT iGpuIndex, HGPUNV *phGpu);
-extern BOOL WINAPI wglEnumGpuDevicesNV (HGPUNV hGpu, UINT iDeviceIndex, PGPU_DEVICE lpGpuDevice);
-extern HDC WINAPI wglCreateAffinityDCNV (const HGPUNV *phGpuList);
-extern BOOL WINAPI wglEnumGpusFromAffinityDCNV (HDC hAffinityDC, UINT iGpuIndex, HGPUNV *hGpu);
-extern BOOL WINAPI wglDeleteDCNV (HDC hdc);
-#endif /* WGL_WGLEXT_PROTOTYPES */
-typedef BOOL (WINAPI * PFNWGLENUMGPUSNVPROC) (UINT iGpuIndex, HGPUNV *phGpu);
-typedef BOOL (WINAPI * PFNWGLENUMGPUDEVICESNVPROC) (HGPUNV hGpu, UINT iDeviceIndex, PGPU_DEVICE lpGpuDevice);
-typedef HDC (WINAPI * PFNWGLCREATEAFFINITYDCNVPROC) (const HGPUNV *phGpuList);
-typedef BOOL (WINAPI * PFNWGLENUMGPUSFROMAFFINITYDCNVPROC) (HDC hAffinityDC, UINT iGpuIndex, HGPUNV *hGpu);
-typedef BOOL (WINAPI * PFNWGLDELETEDCNVPROC) (HDC hdc);
-#endif
-
-#ifndef WGL_AMD_gpu_association
-#define WGL_AMD_gpu_association 1
-#ifdef WGL_WGLEXT_PROTOTYPES
-extern UINT WINAPI wglGetGPUIDsAMD (UINT maxCount, UINT *ids);
-extern INT WINAPI wglGetGPUInfoAMD (UINT id, int property, GLenum dataType, UINT size, void *data);
-extern UINT WINAPI wglGetContextGPUIDAMD (HGLRC hglrc);
-extern HGLRC WINAPI wglCreateAssociatedContextAMD (UINT id);
-extern HGLRC WINAPI wglCreateAssociatedContextAttribsAMD (UINT id, HGLRC hShareContext, const int *attribList);
-extern BOOL WINAPI wglDeleteAssociatedContextAMD (HGLRC hglrc);
-extern BOOL WINAPI wglMakeAssociatedContextCurrentAMD (HGLRC hglrc);
-extern HGLRC WINAPI wglGetCurrentAssociatedContextAMD (void);
-extern VOID WINAPI wglBlitContextFramebufferAMD (HGLRC dstCtx, GLint srcX0, GLint srcY0, GLint srcX1, GLint srcY1, GLint dstX0, GLint dstY0, GLint dstX1, GLint dstY1, GLbitfield mask, GLenum filter);
-#endif /* WGL_WGLEXT_PROTOTYPES */
-typedef UINT (WINAPI * PFNWGLGETGPUIDSAMDPROC) (UINT maxCount, UINT *ids);
-typedef INT (WINAPI * PFNWGLGETGPUINFOAMDPROC) (UINT id, int property, GLenum dataType, UINT size, void *data);
-typedef UINT (WINAPI * PFNWGLGETCONTEXTGPUIDAMDPROC) (HGLRC hglrc);
-typedef HGLRC (WINAPI * PFNWGLCREATEASSOCIATEDCONTEXTAMDPROC) (UINT id);
-typedef HGLRC (WINAPI * PFNWGLCREATEASSOCIATEDCONTEXTATTRIBSAMDPROC) (UINT id, HGLRC hShareContext, const int *attribList);
-typedef BOOL (WINAPI * PFNWGLDELETEASSOCIATEDCONTEXTAMDPROC) (HGLRC hglrc);
-typedef BOOL (WINAPI * PFNWGLMAKEASSOCIATEDCONTEXTCURRENTAMDPROC) (HGLRC hglrc);
-typedef HGLRC (WINAPI * PFNWGLGETCURRENTASSOCIATEDCONTEXTAMDPROC) (void);
-typedef VOID (WINAPI * PFNWGLBLITCONTEXTFRAMEBUFFERAMDPROC) (HGLRC dstCtx, GLint srcX0, GLint srcY0, GLint srcX1, GLint srcY1, GLint dstX0, GLint dstY0, GLint dstX1, GLint dstY1, GLbitfield mask, GLenum filter);
-#endif
-
-#ifndef WGL_NV_video_capture
-#define WGL_NV_video_capture 1
-#ifdef WGL_WGLEXT_PROTOTYPES
-extern BOOL WINAPI wglBindVideoCaptureDeviceNV (UINT uVideoSlot, HVIDEOINPUTDEVICENV hDevice);
-extern UINT WINAPI wglEnumerateVideoCaptureDevicesNV (HDC hDc, HVIDEOINPUTDEVICENV *phDeviceList);
-extern BOOL WINAPI wglLockVideoCaptureDeviceNV (HDC hDc, HVIDEOINPUTDEVICENV hDevice);
-extern BOOL WINAPI wglQueryVideoCaptureDeviceNV (HDC hDc, HVIDEOINPUTDEVICENV hDevice, int iAttribute, int *piValue);
-extern BOOL WINAPI wglReleaseVideoCaptureDeviceNV (HDC hDc, HVIDEOINPUTDEVICENV hDevice);
-#endif /* WGL_WGLEXT_PROTOTYPES */
-typedef BOOL (WINAPI * PFNWGLBINDVIDEOCAPTUREDEVICENVPROC) (UINT uVideoSlot, HVIDEOINPUTDEVICENV hDevice);
-typedef UINT (WINAPI * PFNWGLENUMERATEVIDEOCAPTUREDEVICESNVPROC) (HDC hDc, HVIDEOINPUTDEVICENV *phDeviceList);
-typedef BOOL (WINAPI * PFNWGLLOCKVIDEOCAPTUREDEVICENVPROC) (HDC hDc, HVIDEOINPUTDEVICENV hDevice);
-typedef BOOL (WINAPI * PFNWGLQUERYVIDEOCAPTUREDEVICENVPROC) (HDC hDc, HVIDEOINPUTDEVICENV hDevice, int iAttribute, int *piValue);
-typedef BOOL (WINAPI * PFNWGLRELEASEVIDEOCAPTUREDEVICENVPROC) (HDC hDc, HVIDEOINPUTDEVICENV hDevice);
-#endif
-
-#ifndef WGL_NV_copy_image
-#define WGL_NV_copy_image 1
-#ifdef WGL_WGLEXT_PROTOTYPES
-extern BOOL WINAPI wglCopyImageSubDataNV (HGLRC hSrcRC, GLuint srcName, GLenum srcTarget, GLint srcLevel, GLint srcX, GLint srcY, GLint srcZ, HGLRC hDstRC, GLuint dstName, GLenum dstTarget, GLint dstLevel, GLint dstX, GLint dstY, GLint dstZ, GLsizei width, GLsizei height, GLsizei depth);
-#endif /* WGL_WGLEXT_PROTOTYPES */
-typedef BOOL (WINAPI * PFNWGLCOPYIMAGESUBDATANVPROC) (HGLRC hSrcRC, GLuint srcName, GLenum srcTarget, GLint srcLevel, GLint srcX, GLint srcY, GLint srcZ, HGLRC hDstRC, GLuint dstName, GLenum dstTarget, GLint dstLevel, GLint dstX, GLint dstY, GLint dstZ, GLsizei width, GLsizei height, GLsizei depth);
-#endif
-
-#ifndef WGL_NV_multisample_coverage
-#define WGL_NV_multisample_coverage 1
-#endif
-
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif

3rdparty/SDL-1.3.0-5387/.DISABLED-hgeol

@@ -1,57 +0,0 @@
-[patterns]
-.hgeol = native
-.hgignore = native
-BUGS = native
-CREDITS = native
-INSTALL = native
-NOTES = native
-TODO = native
-WhatsNew = native
-**COPYING = native
-**README = native
-**doxyfile = native
-**Doxyfile = native
-**install-sh = LF
-**mkinstalldirs = LF
-**Makefile = LF
-**Makefile.* = LF
-test/automated/rwops/read = LF
-**README.* = native
-**.S = native
-**.bmp = BIN
-**.c = native
-**.cc = native
-**.cpp = native
-**.csh = LF
-**.dat = BIN
-**.gdbinit = LF
-build-scripts/config.guess = LF
-**.h = native
-**.htm = native
-**.html = native
-**.icns = BIN
-**.in = LF
-**.java = native
-**.m = native
-**.m4 = native
-**.mk = LF
-**.nib = BIN
-**.pch = BIN
-**.pdf = BIN
-**.pl = native
-**.plist = native
-**.png = BIN
-.indent.pro = LF
-**.rc = native
-**.rtf = BIN
-**.sh = LF
-**.sln = native
-**.txt = native
-**.vcp = native
-**.vcproj = native
-**.vcw = native
-**.vcxproj = native
-**.wav = BIN
-**.xbm = BIN
-**.xml = native
-**.zip = BIN

3rdparty/SDL-1.3.0-5387/.hgignore

@@ -1,96 +0,0 @@
-syntax:glob
-autom4te*
-config.cache
-config.log
-config.status
-Makefile
-sdl-config
-SDL.spec
-SDL.qpg
-build
-
-# for Xcode
-*.orig
-*.swp
-*.tmp
-*.rej
-*~
-*.o
-*.mode1*
-*.model*
-*.perspective*
-*.perspective*
-*.pbxuser
-(^|/)build($|/)
-.DS_Store
-
-# for Visual C++
-Debug
-Release
-*.user
-*.ncb
-*.suo
-
-sdl.pc
-test/autom4te*
-test/config.cache
-test/config.log
-test/config.status
-test/Makefile
-test/SDL.dll
-test/checkkeys
-test/graywin
-test/loopwave
-test/testalpha
-test/testatomic
-test/testaudioinfo
-test/testbitmap
-test/testblitspeed
-test/testcdrom
-test/testcursor
-test/testdraw2
-test/testdyngl
-test/testdyngles
-test/testerror
-test/testeyes
-test/testfile
-test/testfill
-test/testgesture
-test/testgl
-test/testgl2
-test/testgles
-test/testhaptic
-test/testhread
-test/testiconv
-test/testime
-test/testintersections
-test/testjoystick
-test/testkeys
-test/testloadso
-test/testlock
-test/testmmousetablet
-test/testmultiaudio
-test/testoverlay
-test/testoverlay2
-test/testpalette
-test/testplatform
-test/testpower
-test/testresample
-test/testscale
-test/testsem
-test/testshader
-test/testshape
-test/testsprite
-test/testsprite2
-test/testspriteminimal
-test/teststreaming
-test/testtimer
-test/testver
-test/testvidinfo
-test/testwin
-test/testwm
-test/testwm2
-test/threadwin
-test/torturethread
-test/*.exe
-test/*.dSYM

3rdparty/SDL-1.3.0-5387/.hgtags

@@ -1,15 +0,0 @@
-0afe0e38e02cf2048e93582f01c52fbb91d3c7bb release-1.2.7
-230b156829ed13b31134d96f689c917981f57b84 release-1.2.5
-27cab50ec9c746e886ce0f3fdaa0b0cdc55a594f release-1.2.11
-2fe3fbd2bff50165b3cad33bf40d70b3bb3c9fd0 release-1.2.3
-3c052d3bcc76c899dfd4846be76243a78e8c7180 release-1.2.4
-3c5eed71a3320962551af3b3dfbee0c99fcf0086 release-1.2.10
-4867f7f7dd3426d1dbbeef48b3f3b3aa19590cc4 release-1.2.12
-6e28dae59e3baf4447c83e833a8d2ac912536f5b release-1.2.1
-7c2589fb8d4df54c6faabd3faebd0c0e73f67879 release-1.2.13
-86de11faf082881ad9b73a1a1d78733ca07f8db8 release-1.2.6
-bb051fa871aa0b53ea57df56a446cec3bb85924c release-1.2.2
-cfcb2e1c36ebe9809577adf768b0ec53e8768af9 release-1.2.8
-e044e7c70a50a2f54d14ee20d0933e904e5853b6 release-1.2.9
-f14cf9d71233934811774f941d0de121d5f96ccf release-1.2.14
-39c22a953456f6c9e2c8993c8ff973824104102a pre-touch-removal

3rdparty/SDL-1.3.0-5387/.indent.pro

@@ -1 +0,0 @@
--i4 -nut -nsc -br -ce -cdw -npcs

3rdparty/SDL-1.3.0-5387/Android.mk

@@ -1,45 +0,0 @@
-LOCAL_PATH := $(call my-dir)
-
-###########################
-#
-# SDL shared library
-#
-###########################
-
-include $(CLEAR_VARS)
-
-LOCAL_MODULE := SDL
-
-LOCAL_C_INCLUDES := $(LOCAL_PATH)/include
-
-LOCAL_SRC_FILES := \
-	$(subst $(LOCAL_PATH)/,, \
-	$(wildcard $(LOCAL_PATH)/src/*.c) \
-	$(wildcard $(LOCAL_PATH)/src/audio/*.c) \
-	$(wildcard $(LOCAL_PATH)/src/audio/android/*.c) \
-	$(wildcard $(LOCAL_PATH)/src/audio/dummy/*.c) \
-	$(LOCAL_PATH)/src/atomic/SDL_atomic.c \
-	$(LOCAL_PATH)/src/atomic/SDL_spinlock.c.arm \
-	$(wildcard $(LOCAL_PATH)/src/core/android/*.cpp) \
-	$(wildcard $(LOCAL_PATH)/src/cpuinfo/*.c) \
-	$(wildcard $(LOCAL_PATH)/src/events/*.c) \
-	$(wildcard $(LOCAL_PATH)/src/file/*.c) \
-	$(wildcard $(LOCAL_PATH)/src/haptic/*.c) \
-	$(wildcard $(LOCAL_PATH)/src/haptic/dummy/*.c) \
-	$(wildcard $(LOCAL_PATH)/src/joystick/*.c) \
-	$(wildcard $(LOCAL_PATH)/src/joystick/android/*.c) \
-	$(wildcard $(LOCAL_PATH)/src/loadso/dlopen/*.c) \
-	$(wildcard $(LOCAL_PATH)/src/power/*.c) \
-	$(wildcard $(LOCAL_PATH)/src/render/*.c) \
-	$(wildcard $(LOCAL_PATH)/src/render/*/*.c) \
-	$(wildcard $(LOCAL_PATH)/src/stdlib/*.c) \
-	$(wildcard $(LOCAL_PATH)/src/thread/*.c) \
-	$(wildcard $(LOCAL_PATH)/src/thread/pthread/*.c) \
-	$(wildcard $(LOCAL_PATH)/src/timer/*.c) \
-	$(wildcard $(LOCAL_PATH)/src/timer/unix/*.c) \
-	$(wildcard $(LOCAL_PATH)/src/video/*.c) \
-	$(wildcard $(LOCAL_PATH)/src/video/android/*.c))
-
-LOCAL_LDLIBS := -ldl -lGLESv1_CM -lGLESv2 -llog
-
-include $(BUILD_SHARED_LIBRARY)

3rdparty/SDL-1.3.0-5387/BUGS

@@ -1,18 +0,0 @@
-
-Bugs are now managed in the SDL bug tracker, here:
-
-    http://bugzilla.libsdl.org/
-
-You may report bugs there, and search to see if a given issue has already
- been reported, discussed, and maybe even fixed.
-
-
-
-You may also find help at the SDL mailing list. Subscription information:
-
-    http://lists.libsdl.org/listinfo.cgi/sdl-libsdl.org
-
-Bug reports are welcome here, but we really appreciate if you use Bugzilla, as
- bugs discussed on the mailing list may be forgotten or missed.
-
-

3rdparty/SDL-1.3.0-5387/Borland.html

@@ -1,139 +0,0 @@
-<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
-<html>
-<head>
-  <title>Building SDL with Borland's C++ compilers</title>
-                                  
-  <meta name="author"
- content="David Snopek and updated by Dominique Louis.">
-</head>
-  <body>
-     <xevol @newtonave.net="">      </xevol>     
-<h1>Building SDL with Borland's C++ compilers. </h1>
-      <b> by <a href="mailto:xevol@users.sourceforge.net"> David Snopek</a></b> 
-    and updated by <b><a href="mailto:Dominique@SavageSoftware.com.au">Dominique 
-  Louis</a></b> ( Last updated : 30th June 2003 ).<br>
-      <br>
-       These instructions cover how to compile SDL and its included test
-programs   using either  Borland <a href="#bcbwin">C++ Builder 5, 6 for Windows</a>, 
- <a href="#k3">C++ Builder for Linux  ( AKA Kylix 3 )</a> or the free <a
- href="#bccc">Borland C++ command-line compiler</a>. <br>
-            
-<h3> <b> Extract the files </b> </h3>
-            
-<p> Unzip the Borland.zip archive into <b>this</b> directory.  Do not unzip 
-  it into any  other directory because the makefiles ( *.mak ) and project 
- files ( *.bpr ) use relative paths to refer to the SDL sources.  This  should 
- create a directory named "Borland" inside of the top level SDL source directory. 
-   </p>
-            
-<h3> <b><a name="bcbwin"></a> Using Borland C++ Builder 5, 6 for Windows </b>
-</h3>
-            
-<p> Inside of the "Borland" directory there is a "bcb6" directory that contains 
-  a number  of Builder project files.  Double-click on the "libSDL.bpg" file 
-  icon.  Once Builder has  started click on the "<u>P</u>rojects" menu on 
-the  menu-bar and go down to  "B<u>u</u>ild All Projects" option.  <br>
-   This will proceed  to build SDL ( with Borland's calling convention ), 
-SDLmain,  and all  the <a href="#tests">test programs</a>. Currently, all 
-the <a href="#tests">test programs</a>  are dynamically linked to Sam Lantinga's 
-SDL.dll.</p>
-     
-<p><b>NOTE :</b> Borland's "lib" format and Microsoft's "lib" format are incompatible.
-&nbsp;<br>
-   If you wish to dynamically link to the SDL library supplied by Sam Lantinga 
- in each release, I have created the correct *.libs for SDL 1.2.4 and they 
- exist in the "/lib" directory.<br>
-   If you would like to create the *.lib files yourself, you will need to 
-make  use of Borland's "implib.exe" utility.<br>
-   </p>
-     
-<p><tt>IMPLIB</tt> works like this: </p>
-       
-<pre>    IMPLIB (destination lib name) (source dll)<br></pre>
-       
-<p> For example,</p>
-       
-<pre>    IMPLIB SDL.lib SDL.dll<br></pre>
-     
-<p>This assumes that SDL.dll was compiled with Visual C++ or similar.<br>
-   </p>
-     
-<p>To learn more about the difference between Borland's and Microsoft's *.lib 
- format please read the article <a
- href="http://www.bcbdev.com/articles/vcdll.htm">here</a>.<br>
-   </p>
-     
-<p>  <b><br>
-   NOTE :</b> The C++ Builder for Windows project format, is not compatible
- with the Kylix  3 project format, hence the reason why they are in separate
- directories.</p>
-            
-<h3> <b><a name="bccc"></a> Using the free Borland C++ command-line compiler 
- </b> </h3>
-            
-<p> The free Borland compiler can be downloaded at no charge from <a
- href="http://www.borland.com/bcppbuilder/freecompiler/"> the  Borland website 
-  </a>.  Make sure that it is installed and properly configured. </p>
-            
-<p> Open an MS-DOS Prompt.  Change to the "Borland\freebcc" directory under 
-  the  SDL source directory.  Type "make -f SDL.mak" to build SDL and "make 
-  -f  SDLmain.mak".  There are also makefiles for all of the <a
- href="#tests">test  programs</a>, if you wish to build them. All .exes and 
-DLLs are created in the "test" SDL directory. Ify ou would like to create 
-the DLL and all the test applications, I have thrown together a basic batchfile 
-called "makeall.bat" which should create everything in the right order. </p>
-            
-<h3> <b> Output files </b> </h3>
-       No matter which compiler you used, three important files should have 
- been  produced:        
-<ul>
-      	<li> SDL.dll ( Borland format ) </li>
-      	<li> SDL.lib&nbsp;( Borland format ) </li>
-      	<li> SDLmain.lib&nbsp;( Borland format ) </li>
-           
-</ul>
-       Both of the *.lib files will need to be added to all the projects
-that   use SDL and SDL.dll  must be placed some where the Windows dynamic
-linker   can find it (either in your  project directory or on the system
-path, C:\WINDOWS\SYSTEM).       
-<h3> <b><a name="k3"></a> Using Borland C++ Builder for Linux ( AKA Kylix 
- 3 ) </b> </h3>
-              
-<p> Inside of the "Borland" directory there is a "k3" directory that contains 
-  a number  of Builder project files.  Double-click on the "libSDL.bpg" file 
-  icon.  Once Builder has  started click on the "<u>P</u>rojects" menu on 
-the  menu-bar and go down to  "B<u>u</u>ild All Projects" option.  This will 
-proceed  to build all  the <a href="#tests">test programs</a>.&nbsp;<br>
-   Linux  users do not need *.lib files as the Shared Object is linked right 
- into the  project ( very neat actually, Windows should do this sort of thing 
- as it is a lot easier for the developer ).  <br>
-      <b>NOTE :</b>&nbsp;The C++ Builder for Windows project format, is not
- compatible with the Kylix  3 project format, hence the reason why they are
- in separate directories.</p>
-           
-<p> On Mandrake 8.1 the shared objects for SDL are located in the /usr/lib 
-  directory as libSDL_*.so and the Mesa OpenGL shared objects are located 
-in  /usr/X11R6/lib as libGL*.so<br>
-       <br>
-       So if your setup is different you may need to change the project file
-  so that they re-link to the ones on your system.<br>
-       <br>
-       On Mandrake 8.1 the headers files are located at /usr/include/SDL/.
- So  if you you have not installed the development RPMs ( usually named libSDL-devel*
-   ) for SDL ( not included ) you may have to change the include directory
- within  some of the projects.<br>
-   </p>
-     
-<h3> Known Problems</h3>
-     The only known problem is that I ( Dominique Louis ), was unable to
-create  the projects that rebuilt the SDL shared objects under Linux, due
-to time  constraints and my lack of intimate knowledge of Linux.     
-<h3><a name="tests"><b> Test programs </b> </a></h3>
-   Some of the test programs require included media files ( *.wav; *.bmp
-etc   ). All the test programs are now created in the "test" directory, where
-the media files are ( usually ) so they should be ready to go.  <br>
-     <br>
-  <br>
- <br>
-</body>
-</html>

3rdparty/SDL-1.3.0-5387/CMakeLists.txt

@@ -1,415 +0,0 @@
-# library name
-set(Output pcsx2_SDL)
-
-set (SDL_ROOT "${PROJECT_SOURCE_DIR}/3rdparty/SDL-1.3.0-5387")
-
-# set common flags
-set(CommonFlags 
-    -DHAVE_LINUX_VERSION_H
-    -D_REENTRANT 
-    -D__LINUX__
-	-pthread
-    -mmmx
-    -msse
-    -msse2
-    -fvisibility=hidden
-	-pipe
-    -w
-    )
-
-# set warning flags
-set(DebugFlags
-	-g
-    )
-
-# set optimization flags
-set(OptimizationFlags
-    -O3
-    )
-
-if(CMAKE_BUILD_TYPE STREQUAL Debug)
-    add_definitions(${CommonFlags} ${DebugFlags})
-endif(CMAKE_BUILD_TYPE STREQUAL Debug)
-
-if(CMAKE_BUILD_TYPE STREQUAL Devel)
-	add_definitions(${CommonFlags} ${OptimizationFlags})
-endif(CMAKE_BUILD_TYPE STREQUAL Devel)
-
-if(CMAKE_BUILD_TYPE STREQUAL Release)
-	add_definitions(${CommonFlags} ${OptimizationFlags})
-endif(CMAKE_BUILD_TYPE STREQUAL Release)
-
-
-#Make on big arrary with all the source and header files
-set(SDL_sources
-
-   #Headers
-   "${SDL_ROOT}/include/begin_code.h"
-   "${SDL_ROOT}/include/close_code.h"
-   "${SDL_ROOT}/include/SDL_assert.h"
-   "${SDL_ROOT}/include/SDL_atomic.h"
-   "${SDL_ROOT}/include/SDL_audio.h"
-   "${SDL_ROOT}/include/SDL_blendmode.h"
-   "${SDL_ROOT}/include/SDL_clipboard.h"
-   "${SDL_ROOT}/include/SDL_compat.h"
-   "${SDL_ROOT}/include/SDL_config.h"
-   "${SDL_ROOT}/include/SDL_config_macosx.h"
-   "${SDL_ROOT}/include/SDL_config_minimal.h"
-   "${SDL_ROOT}/include/SDL_config_windows.h"
-   "${SDL_ROOT}/include/SDL_config_wiz.h"
-   "${SDL_ROOT}/include/SDL_copying.h"
-   "${SDL_ROOT}/include/SDL_cpuinfo.h"
-   "${SDL_ROOT}/include/SDL_endian.h"
-   "${SDL_ROOT}/include/SDL_error.h"
-   "${SDL_ROOT}/include/SDL_events.h"
-   "${SDL_ROOT}/include/SDL_gesture.h"
-   "${SDL_ROOT}/include/SDL.h"
-   "${SDL_ROOT}/include/SDL_haptic.h"
-   "${SDL_ROOT}/include/SDL_hints.h"
-   "${SDL_ROOT}/include/SDL_input.h"
-   "${SDL_ROOT}/include/SDL_joystick.h"
-   "${SDL_ROOT}/include/SDL_keyboard.h"
-   "${SDL_ROOT}/include/SDL_keycode.h"
-   "${SDL_ROOT}/include/SDL_loadso.h"
-   "${SDL_ROOT}/include/SDL_log.h"
-   "${SDL_ROOT}/include/SDL_main.h"
-   "${SDL_ROOT}/include/SDL_mouse.h"
-   "${SDL_ROOT}/include/SDL_mutex.h"
-   "${SDL_ROOT}/include/SDL_name.h"
-   "${SDL_ROOT}/include/SDL_opengles2.h"
-   "${SDL_ROOT}/include/SDL_opengles.h"
-   "${SDL_ROOT}/include/SDL_opengl.h"
-   "${SDL_ROOT}/include/SDL_pixels.h"
-   "${SDL_ROOT}/include/SDL_platform.h"
-   "${SDL_ROOT}/include/SDL_power.h"
-   "${SDL_ROOT}/include/SDL_quit.h"
-   "${SDL_ROOT}/include/SDL_rect.h"
-   "${SDL_ROOT}/include/SDL_render.h"
-   "${SDL_ROOT}/include/SDL_revision.h"
-   "${SDL_ROOT}/include/SDL_rwops.h"
-   "${SDL_ROOT}/include/SDL_scancode.h"
-   "${SDL_ROOT}/include/SDL_shape.h"
-   "${SDL_ROOT}/include/SDL_stdinc.h"
-   "${SDL_ROOT}/include/SDL_surface.h"
-   "${SDL_ROOT}/include/SDL_syswm.h"
-   "${SDL_ROOT}/include/SDL_thread.h"
-   "${SDL_ROOT}/include/SDL_timer.h"
-   "${SDL_ROOT}/include/SDL_touch.h"
-   "${SDL_ROOT}/include/SDL_types.h"
-   "${SDL_ROOT}/include/SDL_version.h"
-   "${SDL_ROOT}/include/SDL_video.h"
-
-   # Source Files
-   "${SDL_ROOT}/src/SDL_assert.c"
-   "${SDL_ROOT}/src/SDL_assert_c.h"
-   "${SDL_ROOT}/src/SDL.c"
-   "${SDL_ROOT}/src/SDL_compat.c"
-   "${SDL_ROOT}/src/SDL_error.c"
-   "${SDL_ROOT}/src/SDL_error_c.h"
-   "${SDL_ROOT}/src/SDL_fatal.c"
-   "${SDL_ROOT}/src/SDL_fatal.h"
-   "${SDL_ROOT}/src/SDL_hints.c"
-   "${SDL_ROOT}/src/SDL_log.c"
-
-   #c/atomic:
-   # "${SDL_ROOT}/src/atomic/SDL_atomic.c"
-   "${SDL_ROOT}/src/atomic/SDL_spinlock.c"
-
-   #c/audio:
-   "${SDL_ROOT}/src/audio/SDL_audio.c"
-   "${SDL_ROOT}/src/audio/SDL_audio_c.h"
-   "${SDL_ROOT}/src/audio/SDL_audiocvt.c"
-   "${SDL_ROOT}/src/audio/SDL_audiodev.c"
-   "${SDL_ROOT}/src/audio/SDL_audiodev_c.h"
-   "${SDL_ROOT}/src/audio/SDL_audiomem.h"
-   "${SDL_ROOT}/src/audio/SDL_audiotypecvt.c"
-   "${SDL_ROOT}/src/audio/SDL_mixer.c"
-   "${SDL_ROOT}/src/audio/SDL_mixer_m68k.c"
-   "${SDL_ROOT}/src/audio/SDL_mixer_m68k.h"
-   "${SDL_ROOT}/src/audio/SDL_mixer_MMX.c"
-   "${SDL_ROOT}/src/audio/SDL_mixer_MMX.h"
-   "${SDL_ROOT}/src/audio/SDL_mixer_MMX_VC.c"
-   "${SDL_ROOT}/src/audio/SDL_mixer_MMX_VC.h"
-   "${SDL_ROOT}/src/audio/SDL_sysaudio.h"
-   "${SDL_ROOT}/src/audio/SDL_wave.c"
-   "${SDL_ROOT}/src/audio/SDL_wave.h"
-
-   #c/cpuinfo:
-   "${SDL_ROOT}/src/cpuinfo/SDL_cpuinfo.c"
-
-   #c/events:
-   "${SDL_ROOT}/src/events/blank_cursor.h"
-   "${SDL_ROOT}/src/events/default_cursor.h"
-   "${SDL_ROOT}/src/events/scancodes_darwin.h"
-   "${SDL_ROOT}/src/events/scancodes_linux.h"
-   "${SDL_ROOT}/src/events/scancodes_windows.h"
-   "${SDL_ROOT}/src/events/scancodes_xfree86.h"
-   "${SDL_ROOT}/src/events/SDL_clipboardevents.c"
-   "${SDL_ROOT}/src/events/SDL_clipboardevents_c.h"
-   "${SDL_ROOT}/src/events/SDL_events.c"
-   "${SDL_ROOT}/src/events/SDL_events_c.h"
-   "${SDL_ROOT}/src/events/SDL_gesture.c"
-   "${SDL_ROOT}/src/events/SDL_gesture_c.h"
-   "${SDL_ROOT}/src/events/SDL_keyboard.c"
-   "${SDL_ROOT}/src/events/SDL_keyboard_c.h"
-   "${SDL_ROOT}/src/events/SDL_mouse.c"
-   "${SDL_ROOT}/src/events/SDL_mouse_c.h"
-   "${SDL_ROOT}/src/events/SDL_quit.c"
-   "${SDL_ROOT}/src/events/SDL_sysevents.h"
-   "${SDL_ROOT}/src/events/SDL_touch.c"
-   "${SDL_ROOT}/src/events/SDL_touch_c.h"
-   "${SDL_ROOT}/src/events/SDL_windowevents.c"
-   "${SDL_ROOT}/src/events/SDL_windowevents_c.h"
-
-   #c/file:
-   "${SDL_ROOT}/src/file/SDL_rwops.c"
-
-   #c/haptic:
-   "${SDL_ROOT}/src/haptic/SDL_haptic.c"
-   "${SDL_ROOT}/src/haptic/SDL_haptic_c.h"
-   "${SDL_ROOT}/src/haptic/SDL_syshaptic.h"
-
-   #c/joystick:
-   "${SDL_ROOT}/src/joystick/SDL_joystick.c"
-   "${SDL_ROOT}/src/joystick/SDL_joystick_c.h"
-   "${SDL_ROOT}/src/joystick/SDL_sysjoystick.h"
-
-   #c/libm:
-   #"${SDL_ROOT}/src/libm/e_atan2.c"
-   #"${SDL_ROOT}/src/libm/e_log.c"
-   #"${SDL_ROOT}/src/libm/e_pow.c"
-   #"${SDL_ROOT}/src/libm/e_rem_pio2.c"
-   #"${SDL_ROOT}/src/libm/e_sqrt.c"
-   #"${SDL_ROOT}/src/libm/k_cos.c"
-   #"${SDL_ROOT}/src/libm/k_rem_pio2.c"
-   #"${SDL_ROOT}/src/libm/k_sin.c"
-   #"${SDL_ROOT}/src/libm/math.h"
-   #"${SDL_ROOT}/src/libm/math_private.h"
-   #"${SDL_ROOT}/src/libm/s_atan.c"
-   #"${SDL_ROOT}/src/libm/s_copysign.c"
-   #"${SDL_ROOT}/src/libm/s_cos.c"
-   #"${SDL_ROOT}/src/libm/s_fabs.c"
-   #"${SDL_ROOT}/src/libm/s_floor.c"
-   #"${SDL_ROOT}/src/libm/s_scalbn.c"
-   #"${SDL_ROOT}/src/libm/s_sin.c"
-
-   #c/power:
-   "${SDL_ROOT}/src/power/SDL_power.c"
-
-   #c/render:
-   "${SDL_ROOT}/src/render/mmx.h"
-   "${SDL_ROOT}/src/render/SDL_render.c"
-   "${SDL_ROOT}/src/render/SDL_sysrender.h"
-   "${SDL_ROOT}/src/render/SDL_yuv_mmx.c"
-   "${SDL_ROOT}/src/render/SDL_yuv_sw.c"
-   "${SDL_ROOT}/src/render/SDL_yuv_sw_c.h"
-
-   #c/stdlib:
-   "${SDL_ROOT}/src/stdlib/SDL_getenv.c"
-   "${SDL_ROOT}/src/stdlib/SDL_iconv.c"
-   "${SDL_ROOT}/src/stdlib/SDL_malloc.c"
-   "${SDL_ROOT}/src/stdlib/SDL_qsort.c"
-   "${SDL_ROOT}/src/stdlib/SDL_stdlib.c"
-   "${SDL_ROOT}/src/stdlib/SDL_string.c"
-
-   #c/thread:
-   "${SDL_ROOT}/src/thread/SDL_systhread.h"
-   "${SDL_ROOT}/src/thread/SDL_thread.c"
-   "${SDL_ROOT}/src/thread/SDL_thread_c.h"
-
-   #c/timer:
-   "${SDL_ROOT}/src/timer/SDL_timer.c"
-   "${SDL_ROOT}/src/timer/SDL_timer_c.h"
-
-   #c/video:
-   "${SDL_ROOT}/src/video/SDL_blit_0.c"
-   "${SDL_ROOT}/src/video/SDL_blit_1.c"
-   "${SDL_ROOT}/src/video/SDL_blit_A.c"
-   "${SDL_ROOT}/src/video/SDL_blit_auto.c"
-   "${SDL_ROOT}/src/video/SDL_blit_auto.h"
-   "${SDL_ROOT}/src/video/SDL_blit.c"
-   "${SDL_ROOT}/src/video/SDL_blit_copy.c"
-   "${SDL_ROOT}/src/video/SDL_blit_copy.h"
-   "${SDL_ROOT}/src/video/SDL_blit.h"
-   "${SDL_ROOT}/src/video/SDL_blit_N.c"
-   "${SDL_ROOT}/src/video/SDL_blit_slow.c"
-   "${SDL_ROOT}/src/video/SDL_blit_slow.h"
-   "${SDL_ROOT}/src/video/SDL_bmp.c"
-   "${SDL_ROOT}/src/video/SDL_clipboard.c"
-   "${SDL_ROOT}/src/video/SDL_fillrect.c"
-   "${SDL_ROOT}/src/video/SDL_pixels.c"
-   "${SDL_ROOT}/src/video/SDL_pixels_c.h"
-   "${SDL_ROOT}/src/video/SDL_rect.c"
-   "${SDL_ROOT}/src/video/SDL_rect_c.h"
-   "${SDL_ROOT}/src/video/SDL_RLEaccel.c"
-   "${SDL_ROOT}/src/video/SDL_RLEaccel_c.h"
-   "${SDL_ROOT}/src/video/SDL_shape.c"
-   "${SDL_ROOT}/src/video/SDL_shape_internals.h"
-   "${SDL_ROOT}/src/video/SDL_stretch.c"
-   "${SDL_ROOT}/src/video/SDL_surface.c"
-   "${SDL_ROOT}/src/video/SDL_sysvideo.h"
-   "${SDL_ROOT}/src/video/SDL_video.c"
-
-   #re deeply nestedfiles that may need some platform specific logic to determine inclusion
-   "${SDL_ROOT}/src/audio/dummy/SDL_dummyaudio.c"
-   "${SDL_ROOT}/src/audio/dummy/SDL_dummyaudio.h"
-   "${SDL_ROOT}/src/haptic/dummy/SDL_syshaptic.c"
-   "${SDL_ROOT}/src/haptic/linux/SDL_syshaptic.c"
-   "${SDL_ROOT}/src/joystick/dummy/SDL_sysjoystick.c"
-   "${SDL_ROOT}/src/joystick/linux/SDL_sysjoystick.c"
-   "${SDL_ROOT}/src/joystick/linux/SDL_sysjoystick_c.h"
-   "${SDL_ROOT}/src/loadso/dlopen/SDL_sysloadso.c"
-   "${SDL_ROOT}/src/loadso/dummy/SDL_sysloadso.c"
-   "${SDL_ROOT}/src/loadso/macosx/SDL_dlcompat.c"
-   "${SDL_ROOT}/src/main/dummy/SDL_dummy_main.c"
-   "${SDL_ROOT}/src/power/linux/SDL_syspower.c"
-   "${SDL_ROOT}/src/render/direct3d/SDL_render_d3d.c"
-   "${SDL_ROOT}/src/render/opengles2/SDL_render_gles2.c"
-   "${SDL_ROOT}/src/render/opengles2/SDL_shaders_gles2.c"
-   "${SDL_ROOT}/src/render/opengles2/SDL_shaders_gles2.h"
-   "${SDL_ROOT}/src/render/opengles/SDL_render_gles.c"
-   "${SDL_ROOT}/src/render/opengl/SDL_glfuncs.h"
-   "${SDL_ROOT}/src/render/opengl/SDL_render_gl.c"
-   "${SDL_ROOT}/src/render/opengl/SDL_shaders_gl.c"
-   "${SDL_ROOT}/src/render/opengl/SDL_shaders_gl.h"
-   "${SDL_ROOT}/src/render/software/SDL_blendfillrect.c"
-   "${SDL_ROOT}/src/render/software/SDL_blendfillrect.h"
-   "${SDL_ROOT}/src/render/software/SDL_blendline.c"
-   "${SDL_ROOT}/src/render/software/SDL_blendline.h"
-   "${SDL_ROOT}/src/render/software/SDL_blendpoint.c"
-   "${SDL_ROOT}/src/render/software/SDL_blendpoint.h"
-   "${SDL_ROOT}/src/render/software/SDL_draw.h"
-   "${SDL_ROOT}/src/render/software/SDL_drawline.c"
-   "${SDL_ROOT}/src/render/software/SDL_drawline.h"
-   "${SDL_ROOT}/src/render/software/SDL_drawpoint.c"
-   "${SDL_ROOT}/src/render/software/SDL_drawpoint.h"
-   "${SDL_ROOT}/src/render/software/SDL_render_sw.c"
-   "${SDL_ROOT}/src/render/software/SDL_render_sw_c.h"
-   # "${SDL_ROOT}/src/thread/generic/SDL_syscond.c"
-   # "${SDL_ROOT}/src/thread/generic/SDL_sysmutex.c"
-   # "${SDL_ROOT}/src/thread/generic/SDL_sysmutex_c.h"
-   # "${SDL_ROOT}/src/thread/generic/SDL_syssem.c"
-   # "${SDL_ROOT}/src/thread/generic/SDL_systhread.c"
-   # "${SDL_ROOT}/src/thread/generic/SDL_systhread_c.h"
-   "${SDL_ROOT}/src/thread/pthread/SDL_syscond.c"
-   "${SDL_ROOT}/src/thread/pthread/SDL_sysmutex.c"
-   "${SDL_ROOT}/src/thread/pthread/SDL_sysmutex_c.h"
-   "${SDL_ROOT}/src/thread/pthread/SDL_syssem.c"
-   "${SDL_ROOT}/src/thread/pthread/SDL_systhread.c"
-   "${SDL_ROOT}/src/thread/pthread/SDL_systhread_c.h"
-   "${SDL_ROOT}/src/timer/dummy/SDL_systimer.c"
-   "${SDL_ROOT}/src/timer/unix/SDL_systimer.c"
-   # "${SDL_ROOT}/src/timer/wince/SDL_systimer.c"
-   # "${SDL_ROOT}/src/video/directfb/SDL_DirectFB_dyn.c"
-   # "${SDL_ROOT}/src/video/directfb/SDL_DirectFB_dyn.h"
-   # "${SDL_ROOT}/src/video/directfb/SDL_DirectFB_events.c"
-   # "${SDL_ROOT}/src/video/directfb/SDL_DirectFB_events.h"
-   # "${SDL_ROOT}/src/video/directfb/SDL_DirectFB_modes.c"
-   # "${SDL_ROOT}/src/video/directfb/SDL_DirectFB_modes.h"
-   # "${SDL_ROOT}/src/video/directfb/SDL_DirectFB_mouse.c"
-   # "${SDL_ROOT}/src/video/directfb/SDL_DirectFB_mouse.h"
-   # "${SDL_ROOT}/src/video/directfb/SDL_DirectFB_opengl.c"
-   # "${SDL_ROOT}/src/video/directfb/SDL_DirectFB_opengl.h"
-   # "${SDL_ROOT}/src/video/directfb/SDL_DirectFB_render.c"
-   # "${SDL_ROOT}/src/video/directfb/SDL_DirectFB_render.h"
-   # "${SDL_ROOT}/src/video/directfb/SDL_DirectFB_video.c"
-   # "${SDL_ROOT}/src/video/directfb/SDL_DirectFB_video.h"
-   # "${SDL_ROOT}/src/video/directfb/SDL_DirectFB_window.c"
-   # "${SDL_ROOT}/src/video/directfb/SDL_DirectFB_window.h"
-   # "${SDL_ROOT}/src/video/directfb/SDL_DirectFB_WM.c"
-   # "${SDL_ROOT}/src/video/directfb/SDL_DirectFB_WM.h"
-   "${SDL_ROOT}/src/video/dummy/SDL_nullevents.c"
-   "${SDL_ROOT}/src/video/dummy/SDL_nullevents_c.h"
-   "${SDL_ROOT}/src/video/dummy/SDL_nullframebuffer.c"
-   "${SDL_ROOT}/src/video/dummy/SDL_nullframebuffer_c.h"
-   "${SDL_ROOT}/src/video/dummy/SDL_nullvideo.c"
-   "${SDL_ROOT}/src/video/dummy/SDL_nullvideo.h"
-   "${SDL_ROOT}/src/video/uikit/jumphack.c"
-   "${SDL_ROOT}/src/video/uikit/jumphack.h"
-   "${SDL_ROOT}/src/video/uikit/keyinfotable.h"
-   "${SDL_ROOT}/src/video/uikit/SDL_uikitappdelegate.h"
-   "${SDL_ROOT}/src/video/uikit/SDL_uikitevents.h"
-   "${SDL_ROOT}/src/video/uikit/SDL_uikitkeyboard.h"
-   "${SDL_ROOT}/src/video/uikit/SDL_uikitopengles.h"
-   "${SDL_ROOT}/src/video/uikit/SDL_uikitopenglview.h"
-   "${SDL_ROOT}/src/video/uikit/SDL_uikitvideo.h"
-   "${SDL_ROOT}/src/video/uikit/SDL_uikitview.h"
-   "${SDL_ROOT}/src/video/uikit/SDL_uikitwindow.h"
-   "${SDL_ROOT}/src/video/x11/imKStoUCS.c"
-   "${SDL_ROOT}/src/video/x11/imKStoUCS.h"
-   "${SDL_ROOT}/src/video/x11/SDL_x11clipboard.c"
-   "${SDL_ROOT}/src/video/x11/SDL_x11clipboard.h"
-   "${SDL_ROOT}/src/video/x11/SDL_x11dyn.c"
-   "${SDL_ROOT}/src/video/x11/SDL_x11dyn.h"
-   "${SDL_ROOT}/src/video/x11/SDL_x11events.c"
-   "${SDL_ROOT}/src/video/x11/SDL_x11events.h"
-   "${SDL_ROOT}/src/video/x11/SDL_x11framebuffer.c"
-   "${SDL_ROOT}/src/video/x11/SDL_x11framebuffer.h"
-   "${SDL_ROOT}/src/video/x11/SDL_x11keyboard.c"
-   "${SDL_ROOT}/src/video/x11/SDL_x11keyboard.h"
-   "${SDL_ROOT}/src/video/x11/SDL_x11modes.c"
-   "${SDL_ROOT}/src/video/x11/SDL_x11modes.h"
-   "${SDL_ROOT}/src/video/x11/SDL_x11mouse.c"
-   "${SDL_ROOT}/src/video/x11/SDL_x11mouse.h"
-   "${SDL_ROOT}/src/video/x11/SDL_x11opengl.c"
-   "${SDL_ROOT}/src/video/x11/SDL_x11opengles.c"
-   "${SDL_ROOT}/src/video/x11/SDL_x11opengles.h"
-   "${SDL_ROOT}/src/video/x11/SDL_x11opengl.h"
-   "${SDL_ROOT}/src/video/x11/SDL_x11shape.c"
-   "${SDL_ROOT}/src/video/x11/SDL_x11shape.h"
-   "${SDL_ROOT}/src/video/x11/SDL_x11sym.h"
-   "${SDL_ROOT}/src/video/x11/SDL_x11touch.c"
-   "${SDL_ROOT}/src/video/x11/SDL_x11touch.h"
-   "${SDL_ROOT}/src/video/x11/SDL_x11video.c"
-   "${SDL_ROOT}/src/video/x11/SDL_x11video.h"
-   "${SDL_ROOT}/src/video/x11/SDL_x11window.c"
-   "${SDL_ROOT}/src/video/x11/SDL_x11window.h"
-
-   "${SDL_ROOT}/src/video/Xext/extensions/extutil.h"
-   "${SDL_ROOT}/src/video/Xext/extensions/panoramiXext.h"
-   "${SDL_ROOT}/src/video/Xext/extensions/panoramiXproto.h"
-   "${SDL_ROOT}/src/video/Xext/extensions/Xext.h"
-   "${SDL_ROOT}/src/video/Xext/extensions/xf86dga1.h"
-   "${SDL_ROOT}/src/video/Xext/extensions/xf86dga1str.h"
-   "${SDL_ROOT}/src/video/Xext/extensions/xf86dga.h"
-   "${SDL_ROOT}/src/video/Xext/extensions/xf86dgastr.h"
-   "${SDL_ROOT}/src/video/Xext/extensions/xf86vmode.h"
-   "${SDL_ROOT}/src/video/Xext/extensions/xf86vmstr.h"
-   "${SDL_ROOT}/src/video/Xext/extensions/Xinerama.h"
-   "${SDL_ROOT}/src/video/Xext/extensions/Xv.h"
-   "${SDL_ROOT}/src/video/Xext/extensions/Xvlib.h"
-   "${SDL_ROOT}/src/video/Xext/extensions/Xvproto.h"
-   "${SDL_ROOT}/src/video/Xext/Xinerama/Xinerama.c"
-   "${SDL_ROOT}/src/video/Xext/XME/xme.c"
-   "${SDL_ROOT}/src/video/Xext/Xv/Xv.c"
-   "${SDL_ROOT}/src/video/Xext/Xv/Xvlibint.h"
-   "${SDL_ROOT}/src/video/Xext/Xxf86vm/XF86VMode.c"
-)
-
-#include_directories( ${SDL_ROOT}/include /usr/include/kde/artsc /usr/include/directfb)
-
-# Hiden option. It is only a temporary workaround of issue 1003. The purpose is to LD_PRELOAD
-# the library so it avoid any conflict with previous SDL1.2 symbol
-if (DEFINED SHARED_SDL)
-    add_library(${Output} SHARED ${SDL_sources} )
-
-    # Install the library with others plugins
-    if(PACKAGE_MODE)
-        install(TARGETS ${Output} DESTINATION ${PLUGIN_DIR})
-    else(PACKAGE_MODE)
-        install(TARGETS ${Output} DESTINATION ${CMAKE_SOURCE_DIR}/bin/plugins)
-    endif(PACKAGE_MODE)
-
-else (DEFINED SHARED_SDL)
-    # Std build use static build
-    add_library(${Output} STATIC ${SDL_sources} )
-endif (DEFINED SHARED_SDL)
-
-# Gold (new linux linker) does not get automatically dependency of dependency so you must add
-# them manually.
-target_link_libraries(${Output} ${LIBC_LIBRARIES})
-
-# User flags options
-if(NOT USER_CMAKE_LD_FLAGS STREQUAL "")
-    target_link_libraries(${Output} "${USER_CMAKE_LD_FLAGS}")
-endif(NOT USER_CMAKE_LD_FLAGS STREQUAL "")

3rdparty/SDL-1.3.0-5387/COPYING

@@ -1,458 +0,0 @@
-		  GNU LESSER GENERAL PUBLIC LICENSE
-		       Version 2.1, February 1999
-
- Copyright (C) 1991, 1999 Free Software Foundation, Inc.
-     51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
-[This is the first released version of the Lesser GPL.  It also counts
- as the successor of the GNU Library Public License, version 2, hence
- the version number 2.1.]
-
-			    Preamble
-
-  The licenses for most software are designed to take away your
-freedom to share and change it.  By contrast, the GNU General Public
-Licenses are intended to guarantee your freedom to share and change
-free software--to make sure the software is free for all its users.
-
-  This license, the Lesser General Public License, applies to some
-specially designated software packages--typically libraries--of the
-Free Software Foundation and other authors who decide to use it.  You
-can use it too, but we suggest you first think carefully about whether
-this license or the ordinary General Public License is the better
-strategy to use in any particular case, based on the explanations below.
-
-  When we speak of free software, we are referring to freedom of use,
-not price.  Our General Public Licenses are designed to make sure that
-you have the freedom to distribute copies of free software (and charge
-for this service if you wish); that you receive source code or can get
-it if you want it; that you can change the software and use pieces of
-it in new free programs; and that you are informed that you can do
-these things.
-
-  To protect your rights, we need to make restrictions that forbid
-distributors to deny you these rights or to ask you to surrender these
-rights.  These restrictions translate to certain responsibilities for
-you if you distribute copies of the library or if you modify it.
-
-  For example, if you distribute copies of the library, whether gratis
-or for a fee, you must give the recipients all the rights that we gave
-you.  You must make sure that they, too, receive or can get the source
-code.  If you link other code with the library, you must provide
-complete object files to the recipients, so that they can relink them
-with the library after making changes to the library and recompiling
-it.  And you must show them these terms so they know their rights.
-
-  We protect your rights with a two-step method: (1) we copyright the
-library, and (2) we offer you this license, which gives you legal
-permission to copy, distribute and/or modify the library.
-
-  To protect each distributor, we want to make it very clear that
-there is no warranty for the free library.  Also, if the library is
-modified by someone else and passed on, the recipients should know
-that what they have is not the original version, so that the original
-author's reputation will not be affected by problems that might be
-introduced by others.
-
-  Finally, software patents pose a constant threat to the existence of
-any free program.  We wish to make sure that a company cannot
-effectively restrict the users of a free program by obtaining a
-restrictive license from a patent holder.  Therefore, we insist that
-any patent license obtained for a version of the library must be
-consistent with the full freedom of use specified in this license.
-
-  Most GNU software, including some libraries, is covered by the
-ordinary GNU General Public License.  This license, the GNU Lesser
-General Public License, applies to certain designated libraries, and
-is quite different from the ordinary General Public License.  We use
-this license for certain libraries in order to permit linking those
-libraries into non-free programs.
-
-  When a program is linked with a library, whether statically or using
-a shared library, the combination of the two is legally speaking a
-combined work, a derivative of the original library.  The ordinary
-General Public License therefore permits such linking only if the
-entire combination fits its criteria of freedom.  The Lesser General
-Public License permits more lax criteria for linking other code with
-the library.
-
-  We call this license the "Lesser" General Public License because it
-does Less to protect the user's freedom than the ordinary General
-Public License.  It also provides other free software developers Less
-of an advantage over competing non-free programs.  These disadvantages
-are the reason we use the ordinary General Public License for many
-libraries.  However, the Lesser license provides advantages in certain
-special circumstances.
-
-  For example, on rare occasions, there may be a special need to
-encourage the widest possible use of a certain library, so that it becomes
-a de-facto standard.  To achieve this, non-free programs must be
-allowed to use the library.  A more frequent case is that a free
-library does the same job as widely used non-free libraries.  In this
-case, there is little to gain by limiting the free library to free
-software only, so we use the Lesser General Public License.
-
-  In other cases, permission to use a particular library in non-free
-programs enables a greater number of people to use a large body of
-free software.  For example, permission to use the GNU C Library in
-non-free programs enables many more people to use the whole GNU
-operating system, as well as its variant, the GNU/Linux operating
-system.
-
-  Although the Lesser General Public License is Less protective of the
-users' freedom, it does ensure that the user of a program that is
-linked with the Library has the freedom and the wherewithal to run
-that program using a modified version of the Library.
-
-  The precise terms and conditions for copying, distribution and
-modification follow.  Pay close attention to the difference between a
-"work based on the library" and a "work that uses the library".  The
-former contains code derived from the library, whereas the latter must
-be combined with the library in order to run.
-
-		  GNU LESSER GENERAL PUBLIC LICENSE
-   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
-
-  0. This License Agreement applies to any software library or other
-program which contains a notice placed by the copyright holder or
-other authorized party saying it may be distributed under the terms of
-this Lesser General Public License (also called "this License").
-Each licensee is addressed as "you".
-
-  A "library" means a collection of software functions and/or data
-prepared so as to be conveniently linked with application programs
-(which use some of those functions and data) to form executables.
-
-  The "Library", below, refers to any such software library or work
-which has been distributed under these terms.  A "work based on the
-Library" means either the Library or any derivative work under
-copyright law: that is to say, a work containing the Library or a
-portion of it, either verbatim or with modifications and/or translated
-straightforwardly into another language.  (Hereinafter, translation is
-included without limitation in the term "modification".)
-
-  "Source code" for a work means the preferred form of the work for
-making modifications to it.  For a library, complete source code means
-all the source code for all modules it contains, plus any associated
-interface definition files, plus the scripts used to control compilation
-and installation of the library.
-
-  Activities other than copying, distribution and modification are not
-covered by this License; they are outside its scope.  The act of
-running a program using the Library is not restricted, and output from
-such a program is covered only if its contents constitute a work based
-on the Library (independent of the use of the Library in a tool for
-writing it).  Whether that is true depends on what the Library does
-and what the program that uses the Library does.
-  
-  1. You may copy and distribute verbatim copies of the Library's
-complete source code as you receive it, in any medium, provided that
-you conspicuously and appropriately publish on each copy an
-appropriate copyright notice and disclaimer of warranty; keep intact
-all the notices that refer to this License and to the absence of any
-warranty; and distribute a copy of this License along with the
-Library.
-
-  You may charge a fee for the physical act of transferring a copy,
-and you may at your option offer warranty protection in exchange for a
-fee.
-
-  2. You may modify your copy or copies of the Library or any portion
-of it, thus forming a work based on the Library, and copy and
-distribute such modifications or work under the terms of Section 1
-above, provided that you also meet all of these conditions:
-
-    a) The modified work must itself be a software library.
-
-    b) You must cause the files modified to carry prominent notices
-    stating that you changed the files and the date of any change.
-
-    c) You must cause the whole of the work to be licensed at no
-    charge to all third parties under the terms of this License.
-
-    d) If a facility in the modified Library refers to a function or a
-    table of data to be supplied by an application program that uses
-    the facility, other than as an argument passed when the facility
-    is invoked, then you must make a good faith effort to ensure that,
-    in the event an application does not supply such function or
-    table, the facility still operates, and performs whatever part of
-    its purpose remains meaningful.
-
-    (For example, a function in a library to compute square roots has
-    a purpose that is entirely well-defined independent of the
-    application.  Therefore, Subsection 2d requires that any
-    application-supplied function or table used by this function must
-    be optional: if the application does not supply it, the square
-    root function must still compute square roots.)
-
-These requirements apply to the modified work as a whole.  If
-identifiable sections of that work are not derived from the Library,
-and can be reasonably considered independent and separate works in
-themselves, then this License, and its terms, do not apply to those
-sections when you distribute them as separate works.  But when you
-distribute the same sections as part of a whole which is a work based
-on the Library, the distribution of the whole must be on the terms of
-this License, whose permissions for other licensees extend to the
-entire whole, and thus to each and every part regardless of who wrote
-it.
-
-Thus, it is not the intent of this section to claim rights or contest
-your rights to work written entirely by you; rather, the intent is to
-exercise the right to control the distribution of derivative or
-collective works based on the Library.
-
-In addition, mere aggregation of another work not based on the Library
-with the Library (or with a work based on the Library) on a volume of
-a storage or distribution medium does not bring the other work under
-the scope of this License.
-
-  3. You may opt to apply the terms of the ordinary GNU General Public
-License instead of this License to a given copy of the Library.  To do
-this, you must alter all the notices that refer to this License, so
-that they refer to the ordinary GNU General Public License, version 2,
-instead of to this License.  (If a newer version than version 2 of the
-ordinary GNU General Public License has appeared, then you can specify
-that version instead if you wish.)  Do not make any other change in
-these notices.
-
-  Once this change is made in a given copy, it is irreversible for
-that copy, so the ordinary GNU General Public License applies to all
-subsequent copies and derivative works made from that copy.
-
-  This option is useful when you wish to copy part of the code of
-the Library into a program that is not a library.
-
-  4. You may copy and distribute the Library (or a portion or
-derivative of it, under Section 2) in object code or executable form
-under the terms of Sections 1 and 2 above provided that you accompany
-it with the complete corresponding machine-readable source code, which
-must be distributed under the terms of Sections 1 and 2 above on a
-medium customarily used for software interchange.
-
-  If distribution of object code is made by offering access to copy
-from a designated place, then offering equivalent access to copy the
-source code from the same place satisfies the requirement to
-distribute the source code, even though third parties are not
-compelled to copy the source along with the object code.
-
-  5. A program that contains no derivative of any portion of the
-Library, but is designed to work with the Library by being compiled or
-linked with it, is called a "work that uses the Library".  Such a
-work, in isolation, is not a derivative work of the Library, and
-therefore falls outside the scope of this License.
-
-  However, linking a "work that uses the Library" with the Library
-creates an executable that is a derivative of the Library (because it
-contains portions of the Library), rather than a "work that uses the
-library".  The executable is therefore covered by this License.
-Section 6 states terms for distribution of such executables.
-
-  When a "work that uses the Library" uses material from a header file
-that is part of the Library, the object code for the work may be a
-derivative work of the Library even though the source code is not.
-Whether this is true is especially significant if the work can be
-linked without the Library, or if the work is itself a library.  The
-threshold for this to be true is not precisely defined by law.
-
-  If such an object file uses only numerical parameters, data
-structure layouts and accessors, and small macros and small inline
-functions (ten lines or less in length), then the use of the object
-file is unrestricted, regardless of whether it is legally a derivative
-work.  (Executables containing this object code plus portions of the
-Library will still fall under Section 6.)
-
-  Otherwise, if the work is a derivative of the Library, you may
-distribute the object code for the work under the terms of Section 6.
-Any executables containing that work also fall under Section 6,
-whether or not they are linked directly with the Library itself.
-
-  6. As an exception to the Sections above, you may also combine or
-link a "work that uses the Library" with the Library to produce a
-work containing portions of the Library, and distribute that work
-under terms of your choice, provided that the terms permit
-modification of the work for the customer's own use and reverse
-engineering for debugging such modifications.
-
-  You must give prominent notice with each copy of the work that the
-Library is used in it and that the Library and its use are covered by
-this License.  You must supply a copy of this License.  If the work
-during execution displays copyright notices, you must include the
-copyright notice for the Library among them, as well as a reference
-directing the user to the copy of this License.  Also, you must do one
-of these things:
-
-    a) Accompany the work with the complete corresponding
-    machine-readable source code for the Library including whatever
-    changes were used in the work (which must be distributed under
-    Sections 1 and 2 above); and, if the work is an executable linked
-    with the Library, with the complete machine-readable "work that
-    uses the Library", as object code and/or source code, so that the
-    user can modify the Library and then relink to produce a modified
-    executable containing the modified Library.  (It is understood
-    that the user who changes the contents of definitions files in the
-    Library will not necessarily be able to recompile the application
-    to use the modified definitions.)
-
-    b) Use a suitable shared library mechanism for linking with the
-    Library.  A suitable mechanism is one that (1) uses at run time a
-    copy of the library already present on the user's computer system,
-    rather than copying library functions into the executable, and (2)
-    will operate properly with a modified version of the library, if
-    the user installs one, as long as the modified version is
-    interface-compatible with the version that the work was made with.
-
-    c) Accompany the work with a written offer, valid for at
-    least three years, to give the same user the materials
-    specified in Subsection 6a, above, for a charge no more
-    than the cost of performing this distribution.
-
-    d) If distribution of the work is made by offering access to copy
-    from a designated place, offer equivalent access to copy the above
-    specified materials from the same place.
-
-    e) Verify that the user has already received a copy of these
-    materials or that you have already sent this user a copy.
-
-  For an executable, the required form of the "work that uses the
-Library" must include any data and utility programs needed for
-reproducing the executable from it.  However, as a special exception,
-the materials to be distributed need not include anything that is
-normally distributed (in either source or binary form) with the major
-components (compiler, kernel, and so on) of the operating system on
-which the executable runs, unless that component itself accompanies
-the executable.
-
-  It may happen that this requirement contradicts the license
-restrictions of other proprietary libraries that do not normally
-accompany the operating system.  Such a contradiction means you cannot
-use both them and the Library together in an executable that you
-distribute.
-
-  7. You may place library facilities that are a work based on the
-Library side-by-side in a single library together with other library
-facilities not covered by this License, and distribute such a combined
-library, provided that the separate distribution of the work based on
-the Library and of the other library facilities is otherwise
-permitted, and provided that you do these two things:
-
-    a) Accompany the combined library with a copy of the same work
-    based on the Library, uncombined with any other library
-    facilities.  This must be distributed under the terms of the
-    Sections above.
-
-    b) Give prominent notice with the combined library of the fact
-    that part of it is a work based on the Library, and explaining
-    where to find the accompanying uncombined form of the same work.
-
-  8. You may not copy, modify, sublicense, link with, or distribute
-the Library except as expressly provided under this License.  Any
-attempt otherwise to copy, modify, sublicense, link with, or
-distribute the Library is void, and will automatically terminate your
-rights under this License.  However, parties who have received copies,
-or rights, from you under this License will not have their licenses
-terminated so long as such parties remain in full compliance.
-
-  9. You are not required to accept this License, since you have not
-signed it.  However, nothing else grants you permission to modify or
-distribute the Library or its derivative works.  These actions are
-prohibited by law if you do not accept this License.  Therefore, by
-modifying or distributing the Library (or any work based on the
-Library), you indicate your acceptance of this License to do so, and
-all its terms and conditions for copying, distributing or modifying
-the Library or works based on it.
-
-  10. Each time you redistribute the Library (or any work based on the
-Library), the recipient automatically receives a license from the
-original licensor to copy, distribute, link with or modify the Library
-subject to these terms and conditions.  You may not impose any further
-restrictions on the recipients' exercise of the rights granted herein.
-You are not responsible for enforcing compliance by third parties with
-this License.
-
-  11. If, as a consequence of a court judgment or allegation of patent
-infringement or for any other reason (not limited to patent issues),
-conditions are imposed on you (whether by court order, agreement or
-otherwise) that contradict the conditions of this License, they do not
-excuse you from the conditions of this License.  If you cannot
-distribute so as to satisfy simultaneously your obligations under this
-License and any other pertinent obligations, then as a consequence you
-may not distribute the Library at all.  For example, if a patent
-license would not permit royalty-free redistribution of the Library by
-all those who receive copies directly or indirectly through you, then
-the only way you could satisfy both it and this License would be to
-refrain entirely from distribution of the Library.
-
-If any portion of this section is held invalid or unenforceable under any
-particular circumstance, the balance of the section is intended to apply,
-and the section as a whole is intended to apply in other circumstances.
-
-It is not the purpose of this section to induce you to infringe any
-patents or other property right claims or to contest validity of any
-such claims; this section has the sole purpose of protecting the
-integrity of the free software distribution system which is
-implemented by public license practices.  Many people have made
-generous contributions to the wide range of software distributed
-through that system in reliance on consistent application of that
-system; it is up to the author/donor to decide if he or she is willing
-to distribute software through any other system and a licensee cannot
-impose that choice.
-
-This section is intended to make thoroughly clear what is believed to
-be a consequence of the rest of this License.
-
-  12. If the distribution and/or use of the Library is restricted in
-certain countries either by patents or by copyrighted interfaces, the
-original copyright holder who places the Library under this License may add
-an explicit geographical distribution limitation excluding those countries,
-so that distribution is permitted only in or among countries not thus
-excluded.  In such case, this License incorporates the limitation as if
-written in the body of this License.
-
-  13. The Free Software Foundation may publish revised and/or new
-versions of the Lesser General Public License from time to time.
-Such new versions will be similar in spirit to the present version,
-but may differ in detail to address new problems or concerns.
-
-Each version is given a distinguishing version number.  If the Library
-specifies a version number of this License which applies to it and
-"any later version", you have the option of following the terms and
-conditions either of that version or of any later version published by
-the Free Software Foundation.  If the Library does not specify a
-license version number, you may choose any version ever published by
-the Free Software Foundation.
-
-  14. If you wish to incorporate parts of the Library into other free
-programs whose distribution conditions are incompatible with these,
-write to the author to ask for permission.  For software which is
-copyrighted by the Free Software Foundation, write to the Free
-Software Foundation; we sometimes make exceptions for this.  Our
-decision will be guided by the two goals of preserving the free status
-of all derivatives of our free software and of promoting the sharing
-and reuse of software generally.
-
-			    NO WARRANTY
-
-  15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO
-WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW.
-EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR
-OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY
-KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE
-LIBRARY IS WITH YOU.  SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME
-THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
-
-  16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN
-WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY
-AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU
-FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR
-CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE
-LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING
-RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A
-FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF
-SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
-DAMAGES.
-
-		     END OF TERMS AND CONDITIONS

3rdparty/SDL-1.3.0-5387/CREDITS

@@ -1,73 +0,0 @@
-
-Simple DirectMedia Layer CREDITS
-Thanks to everyone who made this possible, including:
-
-* Cliff Matthews, for giving me a reason to start this project. :)
- -- Executor rocks!  *grin*
-
-* The Linux Fund, C Magazine, Educational Technology Resources Inc.,
-  Gareth Noyce, Jesse Pavel, Keith Kitchin, Jeremy Horvath, Thomas Nicholson,
-  Hans-Peter Gygax, the Eternal Lands Development Team, Lars Brubaker,
-  and Phoenix Kokido for financial contributions
-
-* Edgar "bobbens" Simo for his force feedback API development during the
-  Google Summer of Code 2008
-
-* Aaron Wishnick for his work on audio resampling and pitch shifting during
-  the Google Summer of Code 2008
-
-* Holmes Futrell for port of SDL to the iPhone and iPod Touch during the
-  Google Summer of Code 2008
-
-* Darren Alton for port of SDL to the Nintendo DS during the Google Summer
-  of Code 2008
-
-* Szymon "Wilku" Wilczek for adding support for multiple mice and tablets
-  during the Google Summer of Code 2008
-
-* Marty Leisner, Andrew, Will, Edgar Simo, Donny Viszneki, Andrea Mazzoleni,
-  Dmytro Bogovych, and Couriersud for helping find SDL 1.3 bugs in the great
-  SDL Bug Hunt of January 2009!
-
-* Donny Viszneki for helping fix SDL 1.3 bugs in the great SDL Bug Hunt of
-  January 2009!
-
-* Luke Benstead for OpenGL 3.0 support
-
-* Ga<47>tan de Menten for writing the PHP and SQL behind the SDL website
-
-* Tim Jones for the new look of the SDL website
-
-* Ryan Gordon for helping everybody out and keeping the dream alive. :)
-
-* Mattias Engdeg<65>rd, for help with the Solaris port and lots of other help
-
-* Eric Wing, Max Horn, and Darrell Walisser for unflagging work on the Mac OS X port
-
-* David Carr<72>, for the Pandora port
-
-* Couriersud for the DirectFB driver
-
-* Jon Atkins for SDL_image, SDL_mixer and SDL_net documentation
-
-* Arne Claus, for the 2004 winning SDL logo,
-  and Shandy Brown, Jac, Alex Lyman, Mikkel Gjoel, #Guy, Jonas Hartmann,
-  Daniel Liljeberg,  Ronald Sowa, DocD, Pekka Jaervinen, Patrick Avella,
-  Erkki Kontilla, Levon Gavalian, Hal Emerich, David Wiktorsson,
-  S. Schury and F. Hufsky, Ciska de Ruyver, Shredweat, Tyler Montbriand,
-  Martin Andersson, Merlyn Wysard, Fernando Ibanez, David Miller,
-  Andre Bommele, lovesby.com, Francisco Camenforte Torres, and David Igreja
-  for other logo entries.
-
-* Bob Pendleton and David Olofson for being long time contributors to
-  the SDL mailing list.
-
-* Everybody at Loki Software, Inc. for their great contributions!
-
- And a big hand to everyone else who gave me appreciation, advice,
- and suggestions, especially the good folks on the SDL mailing list.
-
-THANKS! :)
-
-  -- Sam Lantinga			<slouken@libsdl.org>
-

3rdparty/SDL-1.3.0-5387/INSTALL

@@ -1,27 +0,0 @@
-
-To compile and install SDL:
-
-    0.  If you have downloaded this from the website, skip to the next step.
-        If you have checked this out from subversion, you'll need to run
-        ./autogen.sh to build the configure script. 
-
-    1.  Run './configure; make; make install'
-
-        If you are compiling for Windows using gcc, read the FAQ at:
-        http://www.libsdl.org/faq.php?action=listentries&category=4#42
-
-        If you are compiling using Visual C++ on Win32, you should read
-        the file VisualC.html
-
-    2.  Look at the example programs in ./test, and check out the HTML
-        documentation in ./docs to see how to use the SDL library.
-
-    3.  Join the SDL developer mailing list by sending E-mail to
-    	sdl-request@libsdl.org
-        and put "subscribe" in the subject of the message.
-
-        Or alternatively you can use the web interface:
-            http://www.libsdl.org/mailing-list.php
-
-That's it!
-Sam Lantinga <slouken@libsdl.org>

3rdparty/SDL-1.3.0-5387/Makefile.ds

@@ -1,140 +0,0 @@
-
-#LibSDL 1.3 porting and enhancements by Darren Alton (lifning)
-#LibSDL 1.2.9 DS porting by Troy Davis(GPF)
-
-ifeq ($(strip $(DEVKITPRO)),)
-$(error "Please set DEVKITPRO in your environment (available from http://www.devkitpro.org). export DEVKITPRO=<path to>devkitPro")
-endif
-ifeq ($(strip $(DEVKITARM)),)
-DEVKITARM = $(DEVKITPRO)/devkitARM
-endif
-PATH := $(PATH):$(DEVKITARM)/bin
-
-CC = arm-eabi-gcc
-AR = arm-eabi-ar
-RANLIB = arm-eabi-ranlib
-
-#ifdef GL
-#DEFS += -DSDL_VIDEO_OPENGL=1
-#TARGET = libSDL_gl.a
-#else
-TARGET = libSDL.a
-#endif
-
-#CFLAGS=$(DEFS) -Iinclude
-CFLAGS	=	-mthumb -mthumb-interwork \
-		-march=armv5te -mtune=arm946e-s \
-		-O2 -Wall -Wwrite-strings -Wpointer-arith  \
-		-DARM9 -D__NDS__ -I$(DEVKITPRO)/libnds/include -DENABLE_NDS -DNO_SIGNAL_H -DDISABLE_THREADS -DPACKAGE=\"SDL\" -DVERSION=\"1.3\" -DHAVE_ALLOCA_H=1 -DHAVE_ALLOCA=1 -Iinclude
-
-#src/audio/disk/SDL_diskaudio.c \
-#src/audio/dummy/SDL_dummyaudio.c \
-
-SRCS = \
-src/SDL.c \
-src/SDL_assert.c \
-src/SDL_compat.c \
-src/SDL_error.c \
-src/SDL_fatal.c \
-src/SDL_hints.c \
-src/SDL_log.c \
-src/atomic/SDL_atomic.c \
-src/atomic/SDL_spinlock.c \
-src/audio/SDL_audio.c \
-src/audio/SDL_audiocvt.c \
-src/audio/SDL_audiodev.c \
-src/audio/SDL_audiotypecvt.c \
-src/audio/SDL_mixer.c \
-src/audio/SDL_mixer_MMX.c \
-src/audio/SDL_mixer_MMX_VC.c \
-src/audio/SDL_mixer_m68k.c \
-src/audio/SDL_wave.c \
-src/audio/nds/SDL_ndsaudio.c \
-src/cpuinfo/SDL_cpuinfo.c \
-src/events/SDL_events.c \
-src/events/SDL_keyboard.c \
-src/events/SDL_mouse.c \
-src/events/SDL_quit.c \
-src/events/SDL_touch.c \
-src/events/SDL_windowevents.c \
-src/events/nds/SDL_ndsgesture.c \
-src/file/SDL_rwops.c \
-src/haptic/SDL_haptic.c \
-src/haptic/nds/SDL_syshaptic.c \
-src/joystick/SDL_joystick.c \
-src/joystick/nds/SDL_sysjoystick.c \
-src/power/SDL_power.c \
-src/power/nds/SDL_syspower.c \
-src/render/SDL_render.c \
-src/render/SDL_yuv_sw.c \
-src/render/software/SDL_render_sw.c \
-src/render/software/SDL_blendpoint.c \
-src/render/software/SDL_drawline.c \
-src/render/software/SDL_blendline.c \
-src/render/software/SDL_blendfillrect.c \
-src/render/software/SDL_drawpoint.c \
-src/stdlib/SDL_getenv.c \
-src/stdlib/SDL_iconv.c \
-src/stdlib/SDL_malloc.c \
-src/stdlib/SDL_qsort.c \
-src/stdlib/SDL_stdlib.c \
-src/stdlib/SDL_string.c \
-src/thread/SDL_thread.c \
-src/thread/nds/SDL_syscond.c \
-src/thread/nds/SDL_sysmutex.c \
-src/thread/nds/SDL_syssem.c \
-src/thread/nds/SDL_systhread.c \
-src/timer/SDL_timer.c \
-src/timer/nds/SDL_systimer.c \
-src/video/SDL_RLEaccel.c \
-src/video/SDL_blit.c \
-src/video/SDL_blit_0.c \
-src/video/SDL_blit_1.c \
-src/video/SDL_blit_A.c \
-src/video/SDL_blit_N.c \
-src/video/SDL_blit_auto.c \
-src/video/SDL_blit_copy.c \
-src/video/SDL_blit_slow.c \
-src/video/SDL_bmp.c \
-src/video/SDL_fillrect.c \
-src/video/SDL_pixels.c \
-src/video/SDL_rect.c \
-src/video/SDL_stretch.c \
-src/video/SDL_surface.c \
-src/video/SDL_video.c \
-src/video/dummy/SDL_nullevents.c \
-src/video/dummy/SDL_nullvideo.c \
-src/video/nds/SDL_ndsevents.c \
-src/video/nds/SDL_ndsrender.c \
-src/video/nds/SDL_ndsvideo.c \
-
-OBJS = $(SRCS:.c=.o)
-
-TEST = \
-test/nds-test-progs/general/general.nds \
-test/nds-test-progs/sprite/sprite.nds \
-test/nds-test-progs/sprite2/sprite2.nds \
-
-
-all: $(TARGET) install nds_test
-
-# That file must be compiled in arm mode, not thumb mode.
-src/atomic/SDL_spinlock.o: src/atomic/SDL_spinlock.c
-	$(CC) $(CFLAGS) -mno-thumb -o $@ -c $^
-
-$(TARGET): $(OBJS)
-	$(AR) rc $(TARGET) $(OBJS)
-	-@ ($(RANLIB) $@ || true) >/dev/null 2>&1
-
-install: $(TARGET)
-	@cp libSDL.a $(DEVKITPRO)/libnds/lib/
-	@mkdir -p $(DEVKITPRO)/libnds/include/SDL/
-	@cp include/*.h $(DEVKITPRO)/libnds/include/SDL/
-
-nds_test:
-	$(MAKE) -C test/nds-test-progs/general
-#	$(MAKE) -C test/nds-test-progs/sprite
-#	$(MAKE) -C test/nds-test-progs/sprite2
-
-clean:
-	rm -f $(OBJS)

3rdparty/SDL-1.3.0-5387/Makefile.in

@@ -1,225 +0,0 @@
-# Makefile to build and install the SDL library
-
-top_builddir = .
-srcdir  = @srcdir@
-objects = build
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-bindir	= @bindir@
-libdir  = @libdir@
-includedir = @includedir@
-datarootdir = @datarootdir@
-datadir	= @datadir@
-auxdir	= @ac_aux_dir@
-distpath = $(srcdir)/..
-distdir = SDL-@SDL_VERSION@
-distfile = $(distdir).tar.gz
-
-@SET_MAKE@
-SHELL	= @SHELL@
-CC      = @CC@
-INCLUDE = @INCLUDE@
-CFLAGS  = @BUILD_CFLAGS@
-EXTRA_CFLAGS = @EXTRA_CFLAGS@
-LDFLAGS = @BUILD_LDFLAGS@
-EXTRA_LDFLAGS = @EXTRA_LDFLAGS@
-LIBTOOL = @LIBTOOL@
-INSTALL = @INSTALL@
-NASM	= @NASM@ @NASMFLAGS@
-AR	= @AR@
-RANLIB	= @RANLIB@
-WINDRES	= @WINDRES@
-
-TARGET  = libSDL.la
-OBJECTS = @OBJECTS@
-VERSION_OBJECTS = @VERSION_OBJECTS@
-
-SDLMAIN_TARGET = libSDLmain.a
-SDLMAIN_OBJECTS = @SDLMAIN_OBJECTS@
-
-DIST = acinclude Android.mk autogen.sh Borland.html Borland.zip BUGS build-scripts configure configure.in COPYING CREDITS include INSTALL Makefile.minimal Makefile.in README* sdl-config.in sdl.m4 sdl.pc.in SDL.spec SDL.spec.in src test TODO VisualC.html VisualC VisualCE Watcom-Win32.zip WhatsNew Xcode Xcode-iPhoneOS
-
-HDRS = \
-	SDL.h \
-	SDL_assert.h \
-	SDL_atomic.h \
-	SDL_audio.h \
-	SDL_blendmode.h \
-	SDL_clipboard.h \
-	SDL_compat.h \
-	SDL_cpuinfo.h \
-	SDL_endian.h \
-	SDL_error.h \
-	SDL_events.h \
-	SDL_gesture.h \
-	SDL_haptic.h \
-	SDL_hints.h \
-	SDL_input.h \
-	SDL_joystick.h \
-	SDL_keyboard.h \
-	SDL_keycode.h \
-	SDL_loadso.h \
-	SDL_log.h \
-	SDL_main.h \
-	SDL_mouse.h \
-	SDL_mutex.h \
-	SDL_name.h \
-	SDL_opengl.h \
-	SDL_opengles.h \
-	SDL_pixels.h \
-	SDL_platform.h \
-	SDL_power.h \
-	SDL_quit.h \
-	SDL_rect.h \
-	SDL_render.h \
-	SDL_rwops.h \
-	SDL_scancode.h \
-	SDL_shape.h \
-	SDL_stdinc.h \
-	SDL_surface.h \
-	SDL_syswm.h \
-	SDL_thread.h \
-	SDL_timer.h \
-	SDL_touch.h \
-	SDL_types.h \
-	SDL_version.h \
-	SDL_video.h \
-	begin_code.h \
-	close_code.h
-
-LT_AGE      = @LT_AGE@
-LT_CURRENT  = @LT_CURRENT@
-LT_RELEASE  = @LT_RELEASE@
-LT_REVISION = @LT_REVISION@
-LT_LDFLAGS  = -no-undefined -rpath $(DESTDIR)$(libdir) -release $(LT_RELEASE) -version-info $(LT_CURRENT):$(LT_REVISION):$(LT_AGE)
-
-all: $(srcdir)/configure Makefile $(objects) $(objects)/$(TARGET) $(objects)/$(SDLMAIN_TARGET)
-
-$(srcdir)/configure: $(srcdir)/configure.in
-	@echo "Warning, configure.in is out of date"
-	#(cd $(srcdir) && sh autogen.sh && sh configure)
-	@sleep 3
-
-Makefile: $(srcdir)/Makefile.in
-	$(SHELL) config.status $@
-
-Makefile.in:;
-
-$(objects):
-	$(SHELL) $(auxdir)/mkinstalldirs $@
-
-update-revision:
-	$(SHELL) $(auxdir)/updaterev.sh
-
-.PHONY: all update-revision install install-bin install-hdrs install-lib install-data uninstall uninstall-bin uninstall-hdrs uninstall-lib uninstall-data clean distclean dist $(OBJECTS:.lo=.d)
-
-$(objects)/$(TARGET): $(OBJECTS) $(VERSION_OBJECTS)
-	$(LIBTOOL) --mode=link $(CC) -o $@ $(OBJECTS) $(VERSION_OBJECTS) $(LDFLAGS) $(EXTRA_LDFLAGS) $(LT_LDFLAGS)
-
-$(objects)/$(SDLMAIN_TARGET): $(SDLMAIN_OBJECTS)
-	$(AR) cru $@ $(SDLMAIN_OBJECTS)
-	$(RANLIB) $@
-
-install: all install-bin install-hdrs install-lib install-data
-install-bin:
-	$(SHELL) $(auxdir)/mkinstalldirs $(DESTDIR)$(bindir)
-	$(INSTALL) -m 755 sdl-config $(DESTDIR)$(bindir)/sdl-config
-install-hdrs: update-revision
-	$(SHELL) $(auxdir)/mkinstalldirs $(DESTDIR)$(includedir)/SDL
-	for file in $(HDRS); do \
-	    $(INSTALL) -m 644 $(srcdir)/include/$$file $(DESTDIR)$(includedir)/SDL/$$file; \
-	done
-	$(INSTALL) -m 644 include/SDL_config.h $(DESTDIR)$(includedir)/SDL/SDL_config.h
-	if test -f include/SDL_revision.h; then \
-	    $(INSTALL) -m 644 include/SDL_revision.h $(DESTDIR)$(includedir)/SDL/SDL_revision.h; \
-	else \
-	    $(INSTALL) -m 644 $(srcdir)/include/SDL_revision.h $(DESTDIR)$(includedir)/SDL/SDL_revision.h; \
-	fi
-
-install-lib: $(objects) $(objects)/$(TARGET) $(objects)/$(SDLMAIN_TARGET)
-	$(SHELL) $(auxdir)/mkinstalldirs $(DESTDIR)$(libdir)
-	$(LIBTOOL) --mode=install $(INSTALL) $(objects)/$(TARGET) $(DESTDIR)$(libdir)/$(TARGET)
-	$(INSTALL) -m 644 $(objects)/$(SDLMAIN_TARGET) $(DESTDIR)$(libdir)/$(SDLMAIN_TARGET)
-	$(RANLIB) $(DESTDIR)$(libdir)/$(SDLMAIN_TARGET)
-install-data:
-	$(SHELL) $(auxdir)/mkinstalldirs $(DESTDIR)$(datadir)/aclocal
-	$(INSTALL) -m 644 $(srcdir)/sdl.m4 $(DESTDIR)$(datadir)/aclocal/sdl.m4
-	$(SHELL) $(auxdir)/mkinstalldirs $(DESTDIR)$(libdir)/pkgconfig
-	$(INSTALL) -m 644 sdl.pc $(DESTDIR)$(libdir)/pkgconfig
-
-uninstall: uninstall-bin uninstall-hdrs uninstall-lib uninstall-data
-uninstall-bin:
-	rm -f $(DESTDIR)$(bindir)/sdl-config
-uninstall-hdrs:
-	for file in $(HDRS); do \
-	    rm -f $(DESTDIR)$(includedir)/SDL/$$file; \
-	done
-	rm -f $(DESTDIR)$(includedir)/SDL/SDL_config.h
-	rm -f $(DESTDIR)$(includedir)/SDL/SDL_revision.h
-	-rmdir $(DESTDIR)$(includedir)/SDL
-uninstall-lib:
-	$(LIBTOOL) --mode=uninstall rm -f $(DESTDIR)$(libdir)/$(TARGET)
-	rm -f $(DESTDIR)$(libdir)/$(SDLMAIN_TARGET)
-uninstall-data:
-	rm -f $(DESTDIR)$(datadir)/aclocal/sdl.m4
-	rm -f $(DESTDIR)$(libdir)/pkgconfig/sdl.pc
-
-clean:
-	rm -rf $(objects)
-	if test -f test/Makefile; then (cd test; $(MAKE) $@); fi
-
-distclean: clean
-	rm -f Makefile Makefile.rules sdl-config
-	rm -f SDL.qpg
-	rm -f config.status config.cache config.log libtool
-	rm -rf $(srcdir)/autom4te*
-	find $(srcdir) \( \
-	    -name '*~' -o \
-	    -name '*.bak' -o \
-	    -name '*.old' -o \
-	    -name '*.rej' -o \
-	    -name '*.orig' -o \
-	    -name '.#*' \) \
-	    -exec rm -f {} \;
-	if test -f test/Makefile; then (cd test; $(MAKE) $@); fi
-
-dist $(distfile):
-	$(SHELL) $(auxdir)/mkinstalldirs $(distdir)
-	tar cf - $(DIST) | (cd $(distdir); tar xf -)
-	find $(distdir) \( \
-	    -name '*~' -o \
-	    -name '*.bak' -o \
-	    -name '*.old' -o \
-	    -name '*.rej' -o \
-	    -name '*.orig' -o \
-	    -name '.#*' \) \
-	    -exec rm -f {} \;
-	if test -f $(distdir)/test/Makefile; then (cd $(distdir)/test && make distclean); fi
-	tar cvf - $(distdir) | gzip --best >$(distfile)
-	rm -rf $(distdir)
-
-rpm: $(distfile)
-	rpmbuild -ta $?
-
-# Run indent on the source to standardize coding style
-indent:
-	@echo "Running indent... modified files:"
-	@cd $(srcdir) && \
-	find . \( \
-	    -name '*.h' -o \
-	    -name '*.c' -o \
-	    -name '*.cc' \) \
-	    -print | fgrep -v ./Xcode | \
-	while read file; do \
-	    indent "$$file" -o "$$file.indent"; \
-	    if cmp "$$file" "$$file.indent" >/dev/null; then \
-	        rm -f "$$file.indent"; \
-	    else \
-	        echo "$$file"; \
-	        mv -f "$$file.indent" "$$file"; \
-	    fi; \
-	done
-
-# Run indent and then commit modified files
-commit: indent
-	hg commit

3rdparty/SDL-1.3.0-5387/Makefile.minimal

@@ -1,41 +0,0 @@
-# Makefile to build the SDL library
-
-INCLUDE = -I./include
-CFLAGS  = -g -O2 $(INCLUDE)
-AR	= ar
-RANLIB	= ranlib
-
-TARGET  = libSDL.a
-SOURCES = \
-	src/*.c \
-	src/audio/*.c \
-	src/audio/dummy/*.c \
-	src/cpuinfo/*.c \
-	src/events/*.c \
-	src/file/*.c \
-	src/haptic/*.c \
-	src/haptic/dummy/*.c \
-	src/joystick/*.c \
-	src/joystick/dummy/*.c \
-	src/loadso/dummy/*.c \
-	src/power/*.c \
-	src/render/*.c \
-	src/render/software/*.c \
-	src/stdlib/*.c \
-	src/thread/*.c \
-	src/thread/generic/*.c \
-	src/timer/*.c \
-	src/timer/dummy/*.c \
-	src/video/*.c \
-	src/video/dummy/*.c \
-
-OBJECTS = $(shell echo $(SOURCES) | sed -e 's,\.c,\.o,g')
-
-all: $(TARGET)
-
-$(TARGET): $(OBJECTS)
-	$(AR) crv $@ $^
-	$(RANLIB) $@
-
-clean:
-	rm -f $(TARGET) $(OBJECTS)

3rdparty/SDL-1.3.0-5387/Makefile.pandora

@@ -1,37 +0,0 @@
-# Makefile to build the pandora SDL library
-
-AR	= arm-none-linux-gnueabi-ar
-RANLIB	= arm-none-linux-gnueabi-ranlib
-CC = arm-none-linux-gnueabi-gcc
-CXX = arm-none-linux-gnueabi-g++
-STRIP = arm-none-linux-gnueabi-strip
-
-CFLAGS  = -O3 -march=armv7-a -mcpu=cortex-a8 -mtune=cortex-a8 -mfloat-abi=softfp \
-	-mfpu=neon -ftree-vectorize -ffast-math -fomit-frame-pointer -fno-strict-aliasing -fsingle-precision-constant \
-	-I./include -I$(PNDSDK)/usr/include -DSDL_REVISION=0
-
-TARGET  = libSDL.a
-
-SOURCES = ./src/*.c ./src/audio/*.c ./src/cpuinfo/*.c ./src/events/*.c \
-	./src/file/*.c ./src/stdlib/*.c ./src/thread/*.c ./src/timer/*.c ./src/video/*.c \
-	./src/joystick/*.c ./src/haptic/*.c ./src/power/*.c ./src/video/dummy/*.c ./src/audio/disk/*.c \
-	./src/audio/dummy/*.c ./src/loadso/dlopen/*.c ./src/audio/dsp/*.c ./src/audio/dma/*.c \
-	./src/thread/pthread/SDL_systhread.c ./src/thread/pthread/SDL_syssem.c \
-	./src/thread/pthread/SDL_sysmutex.c ./src/thread/pthread/SDL_syscond.c \
-	./src/joystick/linux/*.c ./src/haptic/linux/*.c ./src/timer/unix/*.c \
-	./src/atomic/linux/*.c \
-	./src/video/pandora/SDL_pandora.o ./src/video/pandora/SDL_pandora_events.o ./src/video/x11/*.c 
-	
-
-OBJECTS = $(shell echo $(SOURCES) | sed -e 's,\.c,\.o,g')
-
-CONFIG_H = $(shell cp include/SDL_config_pandora.h include/SDL_config.h && touch include/SDL_revision.h)
-
-all: $(TARGET)
-
-$(TARGET): $(CONFIG_H) $(OBJECTS)
-	$(AR) crv $@ $^
-	$(RANLIB) $@
-
-clean:
-	rm -f $(TARGET) $(OBJECTS)

3rdparty/SDL-1.3.0-5387/Makefile.wiz

@@ -1,61 +0,0 @@
-# Makefile to build the pandora SDL library
-WIZSDK = /mythtv/media/devel/toolchains/openwiz/arm-openwiz-linux-gnu
-
-AR	= $(WIZSDK)/bin/arm-openwiz-linux-gnu-ar
-RANLIB	= $(WIZSDK)/bin/arm-openwiz-linux-gnu-ranlib
-CC = $(WIZSDK)/bin/arm-openwiz-linux-gnu-gcc
-CXX = $(WIZSDK)/bin/arm-openwiz-linux-gnu-g++
-STRIP = $(WIZSDK)/bin/arm-openwiz-linux-gnu-strip
-
-CFLAGS  = -Wall -fPIC -I./include -I$(WIZSDK)/include -DWIZ_GLES_LITE
-
-TARGET_STATIC  = libSDL13.a
-TARGET_SHARED  = libSDL13.so
-
-SOURCES = ./src/*.c ./src/audio/*.c ./src/cdrom/*.c ./src/cpuinfo/*.c ./src/events/*.c \
-	./src/file/*.c ./src/stdlib/*.c ./src/thread/*.c ./src/timer/*.c ./src/video/*.c \
-	./src/joystick/*.c ./src/haptic/*.c ./src/video/dummy/*.c ./src/audio/disk/*.c \
-	./src/audio/dummy/*.c ./src/loadso/dlopen/*.c ./src/audio/dsp/*.c ./src/audio/dma/*.c \
-	./src/thread/pthread/SDL_systhread.c ./src/thread/pthread/SDL_syssem.c \
-	./src/thread/pthread/SDL_sysmutex.c ./src/thread/pthread/SDL_syscond.c \
-	./src/joystick/linux/*.c ./src/haptic/linux/*.c ./src/timer/unix/*.c ./src/cdrom/dummy/*.c \
-	./src/video/pandora/SDL_pandora.o ./src/video/pandora/SDL_pandora_events.o
-	
-
-OBJECTS = $(shell echo $(SOURCES) | sed -e 's,\.c,\.o,g')
-
-all: config_copy $(TARGET_STATIC) $(TARGET_SHARED)
-
-$(TARGET_STATIC): $(OBJECTS)
-	$(AR) crv $@ $^
-	$(RANLIB) $@
-
-$(TARGET_SHARED):
-	$(CC) -shared -Wl,-soname,$(TARGET_SHARED).0 -o $(TARGET_SHARED).0.0.1  $(OBJECTS)
-	ln -s $(TARGET_SHARED).0.0.1 $(TARGET_SHARED).0
-	ln -s $(TARGET_SHARED).0 $(TARGET_SHARED)
-
-config_copy:
-	cp include/SDL_config_wiz.h include/SDL_config.h
-
-clean:
-	rm -f $(TARGET_STATIC) $(TARGET_SHARED)* $(OBJECTS)
-
-install:
-	mkdir -p $(WIZSDK)/lib
-	mkdir -p $(WIZSDK)/include/SDL13
-	cp -f $(TARGET_STATIC) $(WIZSDK)/lib
-	cp -f $(TARGET_SHARED).0.0.1 $(WIZSDK)/lib
-	rm -f $(WIZSDK)/lib/$(TARGET_SHARED).0 $(WIZSDK)/lib/$(TARGET_SHARED)
-	ln -s $(WIZSDK)/lib/$(TARGET_SHARED).0.0.1 $(WIZSDK)/lib/$(TARGET_SHARED).0
-	ln -s $(WIZSDK)/lib/$(TARGET_SHARED).0 $(WIZSDK)/lib/$(TARGET_SHARED)
-
-	cp $(TARGET_STATIC) ../../toolchain/libs
-	cp $(TARGET_SHARED).0.0.1 ../../toolchain/libs
-	rm -f ../../toolchain/libs/$(TARGET_SHARED).0 ../../toolchain/libs/$(TARGET_SHARED)
-	ln -s ../../toolchain/libs/$(TARGET_SHARED).0.0.1 ../../toolchain/libs/$(TARGET_SHARED).0
-	ln -s ../../toolchain/libs/$(TARGET_SHARED).0 ../../toolchain/libs/$(TARGET_SHARED)
-
-	cp $(TARGET_SHARED).0.0.1 ../nehe_demos/build/$(TARGET_SHARED).0
-	cp -f include/*.h $(WIZSDK)/include/SDL13/
-	cp -f include/*.h ../../toolchain/include/SDL13/

3rdparty/SDL-1.3.0-5387/NOTES

@@ -1,172 +0,0 @@
-
-Sam - Mon Aug  6 23:02:37 PDT 2007
-------
-Add color modulation to blitting
-Blit convert format X -> format Y (needed for texture upload)
-Blit copy / blend / modulate format X -> format X (needed for software renderer)
-
-Create full software renderer for framebuffer interfaces.
-
-Create texture for surface, keep surface around as pixel source, allow
-copying / blending / modulating from surface to display (automatically
-generate texture?)
-
-At that point, should anyone be using anything besides textures for display?
-
-IRC - Mon Aug  6 23:50:44 PDT 2007
------
-[11:07pm] icculus: so we're clear, "textures" replace "surfaces" from 1.2 when you want to get stuff to the screen? So you have a definitely point where it stops being pixels in memory and starts being an object on the graphics card?
-[11:07pm] icculus: Upload once, blit many
-[11:07pm] icculus: something like that?
-[11:07pm] slouken: That's the idea, yes
-[11:07pm] icculus: ok, just making sure
-[11:08pm] slouken: Many drivers retain the "texture" as a surface and blit to opaque bits which then get copied into a framebuffer.
-[11:08pm] slouken: retain -> would retain
-[11:08pm] icculus: yeah, I figured
-[11:08pm] slouken: That's why the features for surface blitting need to match the features for texture display.
-[11:08pm] icculus: But it gives an abstraction where the app has to make a conscious action: the upload is slow, but then the blit is fast.
-[11:09pm] icculus: This couldn't just map to LockSurface, though?
-[11:09pm] slouken: Yes, exactly.  I wasn't sure whether to make that clear, e.g. can you display any surface, and automatically generate a texture (if necessary)?
-[11:09pm] slouken: If not, it simplifies the framebuffer case.
-[11:10pm] slouken: But even the framebuffer case will probably still want to convert the bits to the optimal format.
-[11:10pm] slouken: And at that point, the non-optimal bits can be thrown away.
-[11:11pm] slouken: e.g. SDL_DisplayFormat()
-[11:10pm] icculus: oh, that's a good point.
-[11:10pm] icculus: hmm
-[11:11pm] icculus: yeah, okay
-[11:11pm] icculus: I was thinking about if the separation is really necessary, or if LockSurface would imply a texture creation (and you just have much more strict locking requirements than most 1.2 targets had)
-[11:11pm] slouken: That's also why I separated the conversion blits from the copy / blend / modulate blits.
-[11:12pm] icculus: But I like that the app has to be conscious of when that's happening
-[11:12pm] slouken: Yeah, I was really leaning towards making it implicit, but the memory savings is pretty significant for artwork.
-[11:12pm] icculus: SDL_compat can wrap the difference for people that can't get their head around it.
-[11:13pm] icculus: At the performance cost, that can be a totally external layer that manages it like 1.2's locking.
-[11:13pm] slouken: Well, SDL_compat is entirely software on top of a single texture that represents the screen.
-[11:14pm] slouken: Yeah, that's the way it's implemented right now.
-[11:14pm] slouken: a HWSURFACE is one that is backed by a texture, and lock/unlock is used to synchronize the bits.
-[11:14pm] slouken: I'm not sure if that's worth keeping though, if SDL_compat is software only.
-[11:15pm] slouken: It would minimize code migration though.
-[11:15pm] icculus: yeah
-[11:15pm] icculus: I expect SDL_compat to be a complete cesspool
-[11:15pm] icculus: just a black box that no one touches or looks at more than necessary
-[11:15pm] slouken: more or less, but it's actually pretty clean right now... I think as a side effect of the new API being pretty clean.
-[11:15pm] slouken: I'm just unsure how much to use texture vs HWSURFACE
-[11:16pm] icculus: Besides, you'd be surprised how quickly you can get people to move if you flag functions as deprecated so that GCC bitches when you use them.
-[11:16pm] slouken:
-[11:16pm] icculus: how much to use texture vs HWSURFACE in 1.3, or in SDL_compat?
-[11:16pm] slouken: in 1.3
-[11:17pm] icculus: Pick one or the other, I would say.
-[11:17pm] icculus: I don't think it's good to confuse people with both terms
-[11:17pm] slouken: yeah
-[11:17pm] icculus: Everything is software until it's a texture.
-[11:17pm] slouken: I'm just not sure which
-[11:17pm] slouken: that's certainly cleanest.
-[11:18pm] slouken: and what's currently implemented
-[11:18pm] slouken: Let's think through the migration process...
-[11:18pm] icculus: Plus dropping the term HWSURFACE gets the point across that a) this isn't 1.2 and b) this is probably going to a 3D api that you should be using anyhow.
-[11:18pm] • slouken nods
-[11:18pm] icculus: I mean, "texture" is what every API calls these things
-[11:18pm] slouken: Yep
-[11:19pm] slouken: So let's work through a migration case...
-[11:19pm] icculus: ok
-[11:19pm] slouken: FooBall loads a big background and a bunch of sprites.  They are png, loaded into SDL_Surface with SDL_image, then converted with SDL_DisplayFormat()
-[11:20pm] slouken: Then the background is blitted every frame and the sprites are blended on top.
-[11:20pm] slouken: In the compat case:
-[11:21pm] slouken: SDL_SetVideoMode() creates a single lockable texture for the display.  DisplayFormat() converts the bits into the optimal format, all blitting is done in software, and SDL_UpdateRects() pushes the bits into the texture and the texture is rendered.
-[11:21pm] slouken: In the 1.3 case:
-[11:22pm] slouken: The background and sprites are converted to textures using SDL_CreateTextureFromSurface(), and the appropriate blending flags are set.  Each frame copies the textures into place and then the display is presented.
-[11:23pm] slouken: compat is software only, 1.3 can be 3D accelerated.
-[11:23pm] icculus: wait, why does all blitting have to be done in software in the SDL_compat case?
-[11:23pm] icculus: I don't understand why SDL_compat can't move things between surfaces and textures at Lock/Unlock time
-[11:24pm] slouken: Because by default the screen isn't created with HWSURFACE, since apps expect to be able to munge the bits.  Therefore, the blits to it have to be done locally.
-[11:24pm] icculus: And all the surfaces are flagged HWSURFACE, so ->pixels is NULL until locked.
-[11:24pm] icculus: oh
-[11:24pm] icculus: It wasn't possible to have a HWSURFACE screen?
-[11:25pm] slouken: Yes, it was, just nobody did it because alpha blending needs to read from video memory, and poking pixels across the bus is slow.
-[11:25pm] slouken: Even in 1.3, the Xlib case needs to be software renderer if you want to do any alpha blending.
-[11:26pm] icculus: But arguably there's no reason that can't all be HWSURFACE (that is, they need to get moved to a texture, even if that's still a software renderer on the backend)
-[11:26pm] icculus: That sounds like it's only a problem when an app touches SDL_GetVideoSurface()->pixels without checking if they should lock it.
-[11:26pm] icculus: Which might be quite common
-[11:27pm] slouken: Yep, in 1.2 the app was able to specify it, and most explicitly don't because it's either not available or bad for alpha blending and direct pixel poking.
-[11:27pm] icculus: hmm.
-[11:28pm] slouken: You see why I've been going round and round for months on this?
-[11:28pm] icculus: Well, we're talking about a compatibility layer; if it's going to crash without LockSurface() on the screen, make them lock it. If that makes it slow, so be it.
-[11:29pm] icculus: The options are make small changes and take a performance hit, or make bigger changes and get a big performance win.
-[11:29pm] icculus: (if touching the framebuffer directly, that is)
-[11:29pm] slouken: Well, at that point it's a compatibility layer, why not just leave it software?  (devil's advocate here)
-[11:29pm] icculus: That's a good point.
-[11:30pm] slouken: Unless we leave everything surfaces to get the best of both worlds... 
-[11:30pm] • slouken gets dizzy
-[11:30pm] icculus: From a technical elegance viewpoint, I can see a good mapping between HWSURFACE and textures, but realistically, you want to motivate people to move away from old APIs.
-[11:31pm] slouken: Yeah probably.  There's a certain attraction to retaining the SDL_Surface usage even for hardware surfaces, simply because of code reuse.  You don't have to have separate code for your software composition and your rendering.  You also get to keep your old image loading code, etc.
-[11:31pm] icculus: man, this really is a pain in the ass, I see what you mean.  
-[11:32pm] slouken: Yeah. 
-[11:32pm] icculus: hmm, let me think on this awhile.
-[11:32pm] slouken: On the other hand, separating the Texture API for rendering is clearer and allows extension in the future.
-[11:32pm] slouken: We could potentially allow you to create a software renderer pointed at an SDL surface....
-[11:32pm] slouken: Hmmm
-[11:33pm] icculus: well, that's what you have now for something like Doom
-[11:33pm] icculus: you render to a shadow surface, and throw a hail-mary with SDL_Flip()
-[11:34pm] slouken: Yep.  I mean a 1.3 "renderer" with an SDL_Surface or another texture as the target.
-[11:34pm] icculus: More or less, that doesn't change. The only important thing there is not generating a new texture every time, but being able to discard what's currently in it for a fresh upload.
-[11:34pm] slouken: Yep
-[11:34pm] icculus: oh, I see
-[11:35pm] icculus: render-to-surface  
-[11:35pm] slouken: lol
-[11:35pm] slouken: yeah
-[11:36pm] slouken: So... where to draw the line with surface vs texture...
-[11:37pm] icculus: I don't know, I would think that basically you want to get out of surfaces as fast as possible
-[11:37pm] icculus: (disregarding SDL_compat for the moment)
-[11:37pm] slouken: Yeah, I think so.
-[11:37pm] slouken: Load the bits up, throw them into a texture, and go
-[11:37pm] icculus: And basically all you really need for that is an "upload" function.
-[11:38pm] slouken: Yep
-[11:38pm] icculus: I'd even be inclined to not allow "Locking," so there's no readback.
-[11:38pm] icculus: well, I'm sure that would cause a fight
-[11:38pm] • slouken thinks
-[11:40pm] slouken: Let me see where I use SDL_LockTexture() right now.
-[11:42pm] slouken: The only time that's useful is to avoid a buffer copy when you're already writing the bits in the correct format.
-[11:42pm] slouken: e.g. lock -> software render into bits -> unlock (upload)
-[11:43pm] slouken: that may already be taken care of by the upload though.
-[11:43pm] slouken: e.g. software render into bits -> upload
-[11:44pm] slouken: Oh yeah, there's probably a memory copy of the bits though, so it's:  upload = copy into cached bits, copy cached bits to video memory as needed.  In that case if you lock to get access to the cached bits directly that's a win.
-[11:44pm] icculus: ah, okay
-[11:47pm] icculus: I don't know, my head hurts.  
-[11:47pm] slouken: Yeah, mine too. 
-[11:47pm] slouken: I was pretty happy with the current setup until I noticed that it's really hard to write a framebuffer driver right now.
-[11:49pm] slouken: I think maybe if I clean that up and separate conversion blit and copy / blend / modulate blit, then it may work pretty cleanly.
-[11:49pm] icculus: yeah
-
-[11:54pm] slouken: So recapping... SDL_Surface is only used for loading and app composition.
-[11:55pm] slouken: SDL surface blitting is enhanced to maintain parity with the renderer features, since it's used as the core of the software renderer.
-[11:56pm] slouken: The software renderer is adapted to be a standalone module targeting either an SDL_Surface or an SDL_Texture.
-[11:56pm] slouken: SDL_HWSURFACE goes away
-[11:57pm] slouken: Anything I'm missing?
-[11:58pm] icculus: no, sounds good
-[11:58pm] slouken: This means we have the new 1.3 texture API pretty much as it stands.
-[11:59pm] slouken: Right?
-[11:59pm] icculus: yeah, I think so
-
-[12:00am] slouken: I was trying to see if it was possible to make a pluggable blit API, but I was going insane with trying to figure out how to make it fast.
-[12:01am] slouken: If it were software only I could just say, write your own and register it here, but you'd have to maintain parity with the OpenGL and Direct3D renderers as well.
-[12:01am] slouken: At that point you might as well be working in surfaces and uploading to texture. 
-[12:02am] icculus: yeah
-
-TODO
-----
-Change textures to static/streaming.  Static textures are not lockable,
-streaming textures are lockable and may have system memory pixels available.
-SDL_compat will use a streaming video texture, and will never be HWSURFACE,
-but may be PREALLOC, if system memory pixels are available.
-*** DONE Thu Aug 16 14:18:42 PDT 2007
-
-The software renderer will be abstracted so the surface management can be
-used by any renderer that provides functions to copy surfaces to the window.
-
-Blitters...
-----
-Copy blit and fill rect are optimized with MMX and SSE now.
-
-Here are the pieces we still need:
-- Merging SDL texture capabilities into the SDL surface system
-- Generic fallback blitter architecture
-- Custom fast path blitters

3rdparty/SDL-1.3.0-5387/README

@@ -1,47 +0,0 @@
-
-                         Simple DirectMedia Layer
-
-                                  (SDL)
-
-                                Version 1.3
-
----
-http://www.libsdl.org/
-
-This is the Simple DirectMedia Layer, a general API that provides low
-level access to audio, keyboard, mouse, joystick, 3D hardware via OpenGL,
-and 2D framebuffer across multiple platforms.
-
-The current version supports Windows, Windows CE, Mac OS X, Linux, FreeBSD,
-NetBSD, OpenBSD, BSD/OS, Solaris, iOS, and Android. The code contains
-support for other operating systems but those are not officially supported.
-
-SDL is written in C, but works with C++ natively, and has bindings to
-several other languages, including Ada, C#, Eiffel, Erlang, Euphoria,
-Go, Guile, Haskell, Java, Lisp, Lua, ML, Objective C, Pascal, Perl, PHP,
-Pike, Pliant, Python, Ruby, and Smalltalk.
-
-This library is distributed under GNU LGPL version 2, which can be
-found in the file  "COPYING".  This license allows you to use SDL
-freely in commercial programs as long as you link with the dynamic
-library.
-
-The best way to learn how to use SDL is to check out the header files in
-the "include" subdirectory and the programs in the "test" subdirectory.
-The header files and test programs are well commented and always up to date.
-More documentation is available in HTML format in "docs/index.html", and
-a documentation wiki is available online at:
-	http://www.libsdl.org/cgi/docwiki.cgi
-
-The test programs in the "test" subdirectory are in the public domain.
-
-Frequently asked questions are answered online:
-	http://www.libsdl.org/faq.php
-
-If you need help with the library, or just want to discuss SDL related
-issues, you can join the developers mailing list:
-	http://www.libsdl.org/mailing-list.php
-
-Enjoy!
-	Sam Lantinga				(slouken@libsdl.org)
-

3rdparty/SDL-1.3.0-5387/README-SDL.txt

@@ -1,13 +0,0 @@
-
-Please distribute this file with the SDL runtime environment:
-
-The Simple DirectMedia Layer (SDL for short) is a cross-platfrom library
-designed to make it easy to write multi-media software, such as games and
-emulators.
-
-The Simple DirectMedia Layer library source code is available from:
-http://www.libsdl.org/
-
-This library is distributed under the terms of the GNU LGPL license:
-http://www.gnu.org/copyleft/lesser.html
-

3rdparty/SDL-1.3.0-5387/README.BeOS

@@ -1,13 +0,0 @@
-
-SDL on BeOS R5
-==============
-
-You can build SDL on BeOS like any other GNU style package.
-e.g. ./configure && make && make install
-By default it is installed in /boot/develop/tools/gnupro/{bin,lib,etc.}
-
-Once you install SDL, you need to copy libSDL.so to /boot/home/config/lib,
-so it can be found by the dynamic linker.
-
-Enjoy!
-	Sam Lantinga				(slouken@libsdl.org)

3rdparty/SDL-1.3.0-5387/README.DirectFB

@@ -1,106 +0,0 @@
-SDL on DirectFB
-
-Supports:
-
-- Hardware YUV overlays
-- OpenGL - software only
-- 2D/3D accelerations (depends on directfb driver)
-- multiple displays
-- windows
-
-What you need:
-
-DirectFB 1.0.1, 1.2.x, 1.3.0
-Kernel-Framebuffer support: required: vesafb, radeonfb .... 
-Mesa 7.0.x	   - optional for OpenGL
-
-/etc/directfbrc
-
-This file should contain the following lines to make
-your joystick work and avoid crashes:
-------------------------
-disable-module=joystick
-disable-module=cle266
-disable-module=cyber5k
-no-linux-input-grab
-------------------------
-
-To disable to use x11 backend when DISPLAY variable is found use
-
-export SDL_DIRECTFB_X11_CHECK=0
-
-To disable the use of linux input devices, i.e. multimice/multikeyboard support,
-use
-
-export SDL_DIRECTFB_LINUX_INPUT=0
-
-To use hardware accelerated YUV-overlays for YUV-textures, use:
-
-export SDL_DIRECTFB_YUV_DIRECT=1
-
-This is disabled by default. It will only support one 
-YUV texture, namely the first. Every other YUV texture will be
-rendered in software.
-
-In addition, you may use (directfb-1.2.x)
-
-export SDL_DIRECTFB_YUV_UNDERLAY=1
-
-to make the YUV texture an underlay. This will make the cursor to
-be shown.
-
-Simple Window Manager
-=====================
-
-The driver has support for a very, very basic window manager you may
-want to use when runnning with "wm=default". Use
-
-export SDL_DIRECTFB_WM=1
-
-to enable basic window borders. In order to have the window title rendered,
-you need to have the following font installed:
-
-/usr/share/fonts/truetype/freefont/FreeSans.ttf
-
-OPENGL Support
-==============
-
-The following instructions will give you *software* opengl. However this
-works at least on all directfb supported platforms.
-
-As of this writing 20100802 you need to pull Mesa from git and do the following:
-
-------------------------
-git clone git://anongit.freedesktop.org/git/mesa/mesa
-cd mesa 
-git checkout 2c9fdaf7292423c157fc79b5ce43f0f199dd753a
-------------------------
-
-Edit configs/linux-directfb so that the Directories-section looks like
-------------------------
-# Directories
-SRC_DIRS     = mesa glu 
-GLU_DIRS     = sgi
-DRIVER_DIRS  = directfb
-PROGRAM_DIRS = 
-------------------------
-
-make linux-directfb
-make
-
-echo Installing - please enter sudo pw.
-
-sudo make install INSTALL_DIR=/usr/local/dfb_GL
-cd src/mesa/drivers/directfb
-make
-sudo make install INSTALL_DIR=/usr/local/dfb_GL
-------------------------
-
-To run the SDL - testprograms:
-
-export SDL_VIDEODRIVER=directfb
-export LD_LIBRARY_PATH=/usr/local/dfb_GL/lib
-export LD_PRELOAD=/usr/local/dfb_GL/libGL.so.7
-
-./testgl
-

3rdparty/SDL-1.3.0-5387/README.HG

@@ -1,23 +0,0 @@
-The latest development version of SDL is available via Mercurial.
-Mercurial allows you to get up-to-the-minute fixes and enhancements;
-as a developer works on a source tree, you can use "hg" to mirror that
-source tree instead of waiting for an official release. Please look
-at the Mercurial website ( http://mercurial.selenic.com/ ) for more
-information on using hg, where you can also download software for
-Mac OS X, Windows, and Unix systems.
-
-  hg clone http://hg.libsdl.org/SDL
-
-If you are building SDL with an IDE, you will need to copy the file
-include/SDL_config.h.default to include/SDL_config.h before building.
-
-If you are building SDL via configure, you will need to run autogen.sh
-before running configure.
-
-There is a web interface to the subversion repository at:
-
-	http://hg.libsdl.org/SDL/
-
-There is an RSS feed available at that URL, for those that want to
-track commits in real time.
-

3rdparty/SDL-1.3.0-5387/README.MacOSX

@@ -1,186 +0,0 @@
-==============================================================================
-Using the Simple DirectMedia Layer with Mac OS X
-==============================================================================
-
-These instructions are for people using Apple's Mac OS X (pronounced
-"ten").
-
-From the developer's point of view, OS X is a sort of hybrid Mac and
-Unix system, and you have the option of using either traditional
-command line tools or Apple's IDE Xcode.
-
-To build SDL using the command line, use the standard configure and make
-process:
-
-	./configure
-	make
-	sudo make install
-
-You can also build SDL as a Universal library (a single binary for both
-PowerPC and Intel architectures), on Mac OS X 10.4 and newer, by using
-the fatbuild.sh script in build-scripts:
-	sh build-scripts/fatbuild.sh
-	sudo build-scripts/fatbuild.sh install
-This script builds SDL with 10.2 ABI compatibility on PowerPC and 10.4
-ABI compatibility on Intel architectures.  For best compatibility you
-should compile your application the same way.  A script which wraps
-gcc to make this easy is provided in test/gcc-fat.sh
-
-To use the library once it's built, you essential have two possibilities:
-use the traditional autoconf/automake/make method, or use Xcode.
-
-==============================================================================
-Using the Simple DirectMedia Layer with a traditional Makefile
-==============================================================================
-
-An existing autoconf/automake build system for your SDL app has good chances
-to work almost unchanged on OS X. However, to produce a "real" Mac OS X binary
-that you can distribute to users, you need to put the generated binary into a
-so called "bundle", which basically is a fancy folder with a name like
-"MyCoolGame.app".
-
-To get this build automatically, add something like the following rule to
-your Makefile.am:
-
-bundle_contents = APP_NAME.app/Contents
-APP_NAME_bundle: EXE_NAME
-	mkdir -p $(bundle_contents)/MacOS
-	mkdir -p $(bundle_contents)/Resources
-	echo "APPL????" > $(bundle_contents)/PkgInfo
-	$(INSTALL_PROGRAM) $< $(bundle_contents)/MacOS/
-
-You should replace EXE_NAME with the name of the executable. APP_NAME is what
-will be visible to the user in the Finder. Usually it will be the same
-as EXE_NAME but capitalized. E.g. if EXE_NAME is "testgame" then APP_NAME 
-usually is "TestGame". You might also want to use @PACKAGE@ to use the package
-name as specified in your configure.in file.
-
-If your project builds more than one application, you will have to do a bit
-more.  For each of your target applications, you need a seperate rule.
-
-If you want the created bundles to be installed, you may want to add this
-rule to your Makefile.am:
-
-install-exec-hook: APP_NAME_bundle
-	rm -rf $(DESTDIR)$(prefix)/Applications/APP_NAME.app
-	mkdir -p $(DESTDIR)$(prefix)/Applications/
-	cp -r $< /$(DESTDIR)$(prefix)Applications/
-
-This rule takes the Bundle created by the rule from step 3 and installs them
-into $(DESTDIR)$(prefix)/Applications/.
-
-Again, if you want to install multiple applications, you will have to augment
-the make rule accordingly.
-
-
-But beware! That is only part of the story! With the above, you end up with
-a bare bone .app bundle, which is double clickable from the Finder. But
-there are some  more things you should do before shipping yor product...
-
-1) The bundle right now probably is dynamically linked against SDL. That 
-   means that when you copy it to another computer, *it will not run*,
-   unless you also install SDL on that other computer. A good solution
-   for this dilemma is to static link against SDL. On OS X, you can
-   achieve that by linkinag against the libraries listed by
-     sdl-config --static-libs
-   instead of those listed by
-     sdl-config --libs
-   Depending on how exactly SDL is integrated into your build systems, the
-   way to achieve that varies, so I won't describe it here in detail
-2) Add an 'Info.plist' to your application. That is a special XML file which
-   contains some meta-information about your application (like some copyright
-   information, the version of your app, the name of an optional icon file,
-   and other things). Part of that information is displayed by the Finder
-   when you click on the .app, or if you look at the "Get Info" window.
-   More information about Info.plist files can be found on Apple's homepage.
-
-
-As a final remark, let me add that I use some of the techniques (and some
-variations of them) in Exult and ScummVM; both are available in source on
-the net, so feel free to take a peek at them for inspiration!
-
-
-==============================================================================
-Using the Simple DirectMedia Layer with Xcode
-==============================================================================
-
-These instructions are for using Apple's Xcode IDE to build SDL applications.
-
-- First steps
-
-The first thing to do is to unpack the Xcode.tar.gz archive in the
-top level SDL directory (where the Xcode.tar.gz archive resides).
-Because Stuffit Expander will unpack the archive into a subdirectory,
-you should unpack the archive manually from the command line:
-	cd [path_to_SDL_source]
-	tar zxf Xcode.tar.gz
-This will create a new folder called Xcode, which you can browse
-normally from the Finder.
-
-- Building the Framework
-
-The SDL Library is packaged as a framework bundle, an organized
-relocatable folder heirarchy of executible code, interface headers, 
-and additional resources. For practical purposes, you can think of a 
-framework as a more user and system-friendly shared library, whose library
-file behaves more or less like a standard UNIX shared library.
-
-To build the framework, simply open the framework project and build it. 
-By default, the framework bundle "SDL.framework" is installed in 
-/Library/Frameworks. Therefore, the testers and project stationary expect
-it to be located there. However, it will function the same in any of the
-following locations:
-
-    ~/Library/Frameworks
-    /Local/Library/Frameworks
-    /System/Library/Frameworks
-
-- Build Options
-    There are two "Build Styles" (See the "Targets" tab) for SDL.
-    "Deployment" should be used if you aren't tweaking the SDL library.
-    "Development" should be used to debug SDL apps or the library itself.
-
-- Building the Testers
-    Open the SDLTest project and build away!
-
-- Using the Project Stationary
-    Copy the stationary to the indicated folders to access it from
-    the "New Project" and "Add target" menus. What could be easier?
-
-- Setting up a new project by hand
-    Some of you won't want to use the Stationary so I'll give some tips:
-    * Create a new "Cocoa Application"
-    * Add src/main/macosx/SDLMain.m , .h and .nib to your project
-    * Remove "main.c" from your project
-    * Remove "MainMenu.nib" from your project
-    * Add "$(HOME)/Library/Frameworks/SDL.framework/Headers" to include path
-    * Add "$(HOME)/Library/Frameworks" to the frameworks search path
-    * Add "-framework SDL -framework Foundation -framework AppKit" to "OTHER_LDFLAGS"
-    * Set the "Main Nib File" under "Application Settings" to "SDLMain.nib"
-    * Add your files
-    * Clean and build
-
-- Building from command line
-    Use pbxbuild in the same directory as your .pbproj file
-         
-- Running your app
-    You can send command line args to your app by either invoking it from
-    the command line (in *.app/Contents/MacOS) or by entering them in the
-    "Executibles" panel of the target settings.
-    
-- Implementation Notes
-    Some things that may be of interest about how it all works...
-    * Working directory
-        As defined in the SDL_main.m file, the working directory of your SDL app
-        is by default set to its parent. You may wish to change this to better
-        suit your needs.
-    * You have a Cocoa App!
-        Your SDL app is essentially a Cocoa application. When your app
-        starts up and the libraries finish loading, a Cocoa procedure is called,
-        which sets up the working directory and calls your main() method.
-        You are free to modify your Cocoa app with generally no consequence 
-        to SDL. You cannot, however, easily change the SDL window itself.
-        Functionality may be added in the future to help this.
-	
-
-Known bugs are listed in the file "BUGS"

3rdparty/SDL-1.3.0-5387/README.Platforms

@@ -1,33 +0,0 @@
-
-This is a list of the platforms SDL supports, and who maintains them.
-
-Officially supported platforms
-==============================
-(code compiles, and thoroughly tested for release)
-==============================
-Windows XP
-Windows Vista
-Windows 7
-Mac OS X 10.4+
-Linux 2.6+
-iOS 3.1.3+
-Android 1.6+
-
-Unofficially supported platforms
-================================
-(code compiles, but not thoroughly tested)
-================================
-Windows CE
-FreeBSD
-NetBSD
-OpenBSD
-Solaris
-
-Platforms supported by volunteers
-=================================
-Pandora - maintained by Scott Smith <pickle136@sbcglobal.net>
-
-Platforms that need maintainers
-===============================
-Nintendo DS
-Haiku

3rdparty/SDL-1.3.0-5387/README.Porting

@@ -1,57 +0,0 @@
-
-* Porting To A New Platform
-
-  The first thing you have to do when porting to a new platform, is look at
-include/SDL_platform.h and create an entry there for your operating system.
-The standard format is __PLATFORM__, where PLATFORM is the name of the OS.
-Ideally SDL_platform.h will be able to auto-detect the system it's building
-on based on C preprocessor symbols.
-
-There are two basic ways of building SDL at the moment:
-
-1. The "UNIX" way:  ./configure; make; make install
-
-   If you have a GNUish system, then you might try this.  Edit configure.in,
-   take a look at the large section labelled:
-	"Set up the configuration based on the target platform!"
-   Add a section for your platform, and then re-run autogen.sh and build!
-
-2. Using an IDE:
-
-   If you're using an IDE or other non-configure build system, you'll probably
-   want to create a custom SDL_config.h for your platform.  Edit SDL_config.h,
-   add a section for your platform, and create a custom SDL_config_{platform}.h,
-   based on SDL_config.h.minimal and SDL_config.h.in
-
-   Add the top level include directory to the header search path, and then add
-   the following sources to the project:
-	src/*.c
-	src/audio/*.c
-	src/cdrom/*.c
-	src/cpuinfo/*.c
-	src/events/*.c
-	src/file/*.c
-	src/joystick/*.c
-	src/stdlib/*.c
-	src/thread/*.c
-	src/timer/*.c
-	src/video/*.c
-	src/audio/disk/*.c
-	src/audio/dummy/*.c
-	src/video/dummy/*.c
-	src/joystick/dummy/*.c
-	src/cdrom/dummy/*.c
-	src/thread/generic/*.c
-	src/timer/dummy/*.c
-	src/loadso/dummy/*.c
-
-
-Once you have a working library without any drivers, you can go back to each
-of the major subsystems and start implementing drivers for your platform.
-
-If you have any questions, don't hesitate to ask on the SDL mailing list:
-	http://www.libsdl.org/mailing-list.php
-
-Enjoy!
-	Sam Lantinga				(slouken@libsdl.org)
-

3rdparty/SDL-1.3.0-5387/README.Watcom

@@ -1,139 +0,0 @@
-
-Using SDL 1.3 under Windows with the OpenWatcom compiler
-
-====================================================
-
-Prerequisites
--------------
-
-I have done the port under Windows XP Professional with SP2 installed.
-Windows 2000 should also be working. I'm not so sure about ancient Windows NT,
-since only DirectX 3 is available there. Building should be possible,
-but running the compiled applications will probalbly fail with
-SDL_VIDEODRIVER=directx. The windib driver should work, though.
-
-To compile and use the SDL with Open Watcom you will need the following:
-- Open Watcom compiler. I used version 1.8. The environment variables
-  PATH, WATCOM and INCLUDE need to be set appropriately - please consult
-  the OpenWatcom documentation and instructions given during the
-  installation of the compiler.
-  My setup looks like this in owvars.bat:
-    set WATCOM=C:\dev\ow18
-    set INCLUDE=%WATCOM%\h;%WATCOM%\h\nt
-    set PATH=%PATH%;%WATCOM%\binnt;%WATCOM%\binw
-- A recent DirectX SDK. The library needs D3d9.h so at leat the
-  directx 9 sdk is to be used. I used DirectX 10 SDK from August 2009
-  taken directly from the microsoft site.
-- The SDL 1.3 sources from Subversion
-- The file Watcom-Win32.zip (now available in Subversion)
-
-
-Building the Library
---------------------
-
-1) In the SDL base directory extract the archive Watcom-Win32.zip. This
-   creates a subdirectory named 'watcom'.
-2) The makefile expects the environment variable DXDIR to be set to the
-   base directory of a DirectX SDK. I have tried the August 2009
-   DirectX SDK from Microsoft
-   You can also edit the makefile directly and hard code your path to
-   the SDK on your system.
-   I have this in my setup:
-     set DXDIR=..\dx10
-3) Enter the watcom directory and run
-     wmake sdl
-4) All tests from the test directory are working and can be built by
-   running
-     wmake tests
-
-Notes:
-
- The makefile offers some options to tweak the way the library is built.
- You have at your disposal the option to build a static (default)
- library, or a DLL (with tgt=dll). You can also choose whether to build
- a Release (default) or a Debug version (with build=debug) of the tests
- and library. Please consult the usage comment at the top of the
- makefile for usage instructions.
-
- If you specify a test target (i.e. 'wmake tests' for all tests, or
- selected targets like 'wmake testgl testvidinfo testoverlay2'), the
- tests are always freshly compiled and linked. This is done to
- minimise hassle when switching between library versions (static vs.
- DLL), because they require subtly different options.
- Also, the test executables are put directly into the test directory,
- so they can find their data files. The clean target of the makefile
- removes the test executables and the SDL.dll file from the test
- directory.
-
- To use the library in your own projects with Open Watcom, you can use
- the way the tests are built as base of your own build environment.
-
- The library can also be built with the stack calling convention of the
- compiler (-6s instead of -6r).
-
-Test applications
------------------
-$FixME: which test works ? which one compiles ?
-
-I've tried to make all tests work. The following table gives an overview
-of the current status.
-
- Testname        Status
-~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-checkkeys       +
-graywin         +
-loopwave        +
-testalpha       +
-testbitmap      +
-testdyngl       +
-testerror       +
-testfile        +
-testgamma       +
-testgl          +
-testhread       +
-testiconv       - (all failed)
-testkeys        +
-testlock        +
-testoverlay     + (needs 'set SDL_VIDEODRIVER=directx')
-testoverlay2    + (needs 'set SDL_VIDEODRIVER=directx')
-testpalette     +
-testplatform    +
-testsem         +
-testsprite      +
-testtimer       +
-testver         +
-testvidinfo     +
-testwin         ? (fading doesn't seem right)
-testwm          +
-torturethread   +
-testcdrom       +
-testjoystick    not tested
-threadwin       +
-testcursor      +
-
-
-TODO
-----
-
-There is room for further improvement:
-- Test joystick functionality.
-- Investigate fading issue in 'testwin' test.
-- Fix the UTF-8 support.
-- Adapt the makefile/object file list to support more target systems
-- Use "#pragma aux" syntax for the CPU info functions.
-
-
-Questions and Comments
-----------------------
-
-Please direct any questions or comments to me:
-
-        ow_sdl [at] digitalfantasy [dot] it
-
-The original porting to the open watcom compiler was made by
-Marc Peter <mailto:macpete@gmx.de>
-
-   Happy Coding!
-
-   Daniele Forghieri
-

3rdparty/SDL-1.3.0-5387/README.WinCE

@@ -1,55 +0,0 @@
-
-Project files for embedded Visual C++ 3.0, 4.0 and 
-Visual Studio 2005 can be found in VisualCE.zip
-
-SDL supports GAPI and WinDib output for Windows CE.
-
-GAPI driver supports:
-
-- all possible WinCE devices (Pocket PC, Smartphones, HPC)
-  with different orientations of video memory and resolutions.
-- 4, 8 and 16 bpp devices
-- special handling of 8bpp on 8bpp devices
-- VGA mode, you can even switch between VGA and GAPI in runtime
-  (between 240x320 and 480x640 for example). On VGA devices you can
-  use either GAPI or VGA.
-- Landscape mode and automatic rotation of buttons and stylus coordinates.
-  To enable landscape mode make width of video screen bigger than height.
-  For example: 
-    SDL_SetVideoMode(320,240,16,SDL_FULLSCREEN)
-- WM2005
-- SDL_ListModes
-
-NOTE:
-There are several SDL features not available in the WinCE port of SDL.
-
-- DirectX is not yet available
-- Semaphores are not available
-- Joystick support is not available
-- CD-ROM control is not available
-
-In addition, there are several features that run in "degraded" mode:
-
-Preprocessor Symbol		Effect
-===================		=================================
-
-SDL_systimer.c:
-USE_GETTICKCOUNT		Less accurate values for SDL time functions
-USE_SETTIMER			Use only a single marginally accurate timer
-
-SDL_syswm.c:
-DISABLE_ICON_SUPPORT		Can't set the runtime window icon
-
-SDL_sysmouse.c:
-USE_STATIC_CURSOR		Only the arrow cursor is available
-
-SDL_sysevents.c:
-NO_GETKEYBOARDSTATE		Can't get modifier state on keyboard focus
-
-SDL_dibevents.c:
-NO_GETKEYBOARDSTATE		Very limited keycode translation
-
-SDL_dibvideo.c:
-NO_GETDIBITS			Can't distinguish between 15 bpp and 16 bpp
-NO_CHANGEDISPLAYSETTINGS	No fullscreen support
-NO_GAMMA_SUPPORT		Gamma correction not available

3rdparty/SDL-1.3.0-5387/README.android

@@ -1,174 +0,0 @@
-================================================================================
-Simple DirectMedia Layer for Android
-================================================================================
-
-Requirements:
-
-Android SDK
-http://developer.android.com/sdk/index.html
-
-Android NDK r4 or later
-http://developer.android.com/sdk/ndk/index.html
-
-
-================================================================================
- How the port works
-================================================================================
-
-- Android applications are Java-based, optionally with parts written in C
-- As SDL apps are C-based, we use a small Java shim that uses JNI to talk to 
-the SDL library
-- This means that your application C code must be placed inside an android 
-Java project, along with some C support code that communicates with Java
-- This eventually produces a standard Android .apk package
-
-The Android Java code implements an "activity" and can be found in:
-android-project/src/org/libsdl/app/SDLActivity.java
-
-The Java code loads your game code, the SDL shared library, and
-dispatches to native functions implemented in the SDL library:
-src/SDL_android.cpp
-
-Your project must include some glue code that starts your main() routine:
-src/main/android/SDL_android_main.cpp
-
-
-================================================================================
- Building an app
-================================================================================
-
-Instructions:
-1. Copy the android-project directory wherever you want to keep your projects and rename it to the name of your project.
-2. Move this SDL directory into the <project>/jni directory
-3. Place your application source files in the <project>/jni/src directory
-4. Edit <project>/jni/src/Android.mk to include your source files
-5. Run 'ndk-build' (a script provided by the NDK). This compiles the C source
-
-If you want to use the Eclipse IDE, skip to the Eclipse section below.
-
-6. Edit <project>/local.properties to point to the Android SDK directory
-7. Run 'ant debug' in android/project. This compiles the .java and eventually 
-creates a .apk with the native code embedded
-8. 'ant install' will push the apk to the device or emulator (if connected)
-
-Here's an explanation of the files in the Android project, so you can customize them:
-
-android-project/
-	AndroidManifest.xml	- package manifest, do not modify
-	build.properties	- empty
-	build.xml		- build description file, used by ant
-	default.properties	- holds the ABI for the application, currently android-4 which corresponds to the Android 1.6 system image
-	local.properties	- holds the SDK path, you should change this to the path to your SDK
-	jni/			- directory holding native code
-	jni/Android.mk		- Android makefile that includes all subdirectories
-	jni/SDL/		- directory holding the SDL library files
-	jni/SDL/Android.mk	- Android makefile for creating the SDL shared library
-	jni/src/		- directory holding your C/C++ source
-	jni/src/Android.mk	- Android makefile that you should customize to include your source code and any library references
-	res/			- directory holding resources for your application
-	res/drawable-*		- directories holding icons for different phone hardware
-	res/layout/main.xml	- place holder for the main screen layout, overridden by the SDL video output
-	res/values/strings.xml	- strings used in your application, including the application name shown on the phone.
-	src/org/libsdl/app/SDLActivity.java	- the Java class handling the initialization and binding to SDL.  Be very careful changing this, as the SDL library relies on this implementation.
-
-
-================================================================================
- Additional documentation
-================================================================================
-
-The documentation in the NDK docs directory is very helpful in understanding the build process and how to work with native code on the Android platform.
-
-The best place to start is with docs/OVERVIEW.TXT
-
-
-================================================================================
- Using Eclipse
-================================================================================
-
-First make sure that you've installed Eclipse and the Android extensions as described here:
-	http://developer.android.com/sdk/eclipse-adt.html
-
-Once you've copied the SDL android project and customized it, you can create an Eclipse project from it:
- * File -> New -> Other
- * Select the Android -> Android Project wizard and click Next
- * Enter the name you'd like your project to have
- * Select "Create project from existing source" and browse for your project directory
- * Make sure the Build Target is set to Android 1.6
- * Click Finish
-
-
-================================================================================
- Loading files and resources
-================================================================================
-
-NEED CONTENT
-
-
-================================================================================
- Troubleshooting
-================================================================================
-
-You can create and run an emulator from the Eclipse IDE:
- * Window -> Android SDK and AVD Manager
-
-You can see if adb can see any devices with the following command:
-	adb devices
-
-You can see the output of log messages on the default device with:
-	adb logcat
-
-You can push files to the device with:
-	adb push local_file remote_path_and_file
-
-You can push files to the SD Card at /sdcard, for example:
-	adb push moose.dat /sdcard/moose.dat
-
-You can see the files on the SD card with a shell command:
-	adb shell ls /sdcard/
-
-You can start a command shell on the default device with:
-	adb shell
-
-You can do a clean build with the following commands:
-	ndk-build clean
-	ndk-build
-
-You can see the complete command line that ndk-build is using by passing V=1 on the command line:
-	ndk-build V=1
-
-If your application crashes in native code, you can use addr2line to convert the addresses in the stack trace to lines in your code.
-
-For example, if your crash looks like this:
-I/DEBUG   (   31): signal 11 (SIGSEGV), code 2 (SEGV_ACCERR), fault addr 400085d0
-I/DEBUG   (   31):  r0 00000000  r1 00001000  r2 00000003  r3 400085d4
-I/DEBUG   (   31):  r4 400085d0  r5 40008000  r6 afd41504  r7 436c6a7c
-I/DEBUG   (   31):  r8 436c6b30  r9 435c6fb0  10 435c6f9c  fp 4168d82c
-I/DEBUG   (   31):  ip 8346aff0  sp 436c6a60  lr afd1c8ff  pc afd1c902  cpsr 60000030
-I/DEBUG   (   31):          #00  pc 0001c902  /system/lib/libc.so
-I/DEBUG   (   31):          #01  pc 0001ccf6  /system/lib/libc.so
-I/DEBUG   (   31):          #02  pc 000014bc  /data/data/org.libsdl.app/lib/libmain.so
-I/DEBUG   (   31):          #03  pc 00001506  /data/data/org.libsdl.app/lib/libmain.so
-
-You can see that there's a crash in the C library being called from the main code.  I run addr2line with the debug version of my code:
-	arm-eabi-addr2line -C -f -e obj/local/armeabi/libmain.so
-and then paste in the number after "pc" in the call stack, from the line that I care about:
-000014bc
-
-I get output from addr2line showing that it's in the quit function, in testspriteminimal.c, on line 23.
-
-You can add logging to your code to help show what's happening:
-
-#include <android/log.h>
-
-	__android_log_print(ANDROID_LOG_INFO, "foo", "Something happened! x = %d", x);
-
-If you need to build without optimization turned on, you can create a file called "Application.mk" in the jni directory, with the following line in it:
-APP_OPTIM := debug
-
-
-================================================================================
- Known issues
-================================================================================
-
-- SDL audio (although it's mostly written, just not working properly yet)
-- TODO. I'm sure there's a bunch more stuff I haven't thought of 

3rdparty/SDL-1.3.0-5387/README.ds

@@ -1,19 +0,0 @@
-================================================================================
-Simple DirectMedia Layer for Nintendo DS
-================================================================================
-
--Requirements-
-The devkitpro SDK available at http://devkitpro.org.
-Read the information at http://devkitpro.org/wiki/Getting_Started/devkitARM
-The necessary packages are devkitARM, libnds and default arm7.
-
--Building SDL-
-After setting the devkitpro environment, type:
-  make -f Makefile.ds
-
-This will compile and install the library and headers into the proper libnds directories.
-Additionnaly it will compile the general test, that you can run either on the DS or with desmume:
-  desmume test/nds-test-progs/general/general.nds
-
-
-Note that the port is very basic and incomplete.

3rdparty/SDL-1.3.0-5387/README.gesture

@@ -1,72 +0,0 @@
-===========================================================================
-Dollar Gestures
-===========================================================================
-SDL Provides an implementation of the $1 gesture recognition system. This allows for recording, saving, loading, and performing single stroke gestures.
-
-Gestures can be performed with any number of fingers (the centroid of the fingers must follow the path of the gesture), but the number of fingers must be constant (a finger cannot go down in the middle of a gesture). The path of a gesture is considered the path from the time when the final finger went down, to the first time any finger comes up. 
-
-Dollar gestures are assigned an Id based on a hash function. This is guaranteed to remain constant for a given gesture. There is a (small) chance that two different gestures will be assigned the same ID. In this case, simply re-recording one of the gestures should result in a different ID.
-
-Recording:
-----------
-To begin recording on a touch device call:
-SDL_RecordGesture(SDL_TouchID touchId), where touchId is the id of the touch device you wish to record on, or -1 to record on all connected devices.
-
-Recording terminates as soon as a finger comes up. Recording is acknowledged by an SDL_DOLLARRECORD event.
-A SDL_DOLLARRECORD event is a dgesture with the following fields:
-
-event.dgesture.touchId   - the Id of the touch used to record the gesture.
-event.dgesture.gestureId - the unique id of the recoreded gesture.
-
-
-Performing:
------------
-As long as there is a dollar gesture assigned to a touch, every finger-up event will also cause an SDL_DOLLARGESTURE event with the following fields:
-
-event.dgesture.touchId    - the Id of the touch which performed the gesture.
-event.dgesture.gestureId  - the unique id of the closest gesture to the performed stroke.
-event.dgesture.error      - the difference between the gesture template and the actual performed gesture. Lower error is a better match.
-event.dgesture.numFingers - the number of fingers used to draw the stroke.
-
-Most programs will want to define an appropriate error threshold and check to be sure taht the error of a gesture is not abnormally high (an indicator that no gesture was performed). 
-
-
-
-Saving:
--------
-To save a template, call SDL_SaveDollarTemplate(gestureId, src) where gestureId is the id of the gesture you want to save, and src is an SDL_RWops pointer to the file where the gesture will be stored.
-
-To save all currently loaded templates, call SDL_SaveAllDollarTemplates(src) where source is an SDL_RWops pointer to the file where the gesture will be stored.
-
-Both functions return the number of gestures sucessfully saved.
-
-
-Loading:
---------
-To load templates from a file, call SDL_LoadDollarTemplates(touchId,src) where touchId is the id of the touch to load to (or -1 to load to all touch devices), and src is an SDL_RWops pointer to a gesture save file. 
-
-SDL_LoadDollarTemplates returns the number of templates sucessfully loaded. 
-
-
-
-===========================================================================
-Multi Gestures
-===========================================================================
-SDL provides simple support for pinch/rotate/swipe gestures. 
-Every time a finger is moved an SDL_MULTIGESTURE event is sent with the following fields:
-
-event.mgesture.touchId - the Id of the touch on which the gesture was performed.
-event.mgesture.x       - the normalized x cooridinate of the gesture. (0..1)
-event.mgesture.y       - the normalized y cooridinate of the gesture. (0..1)
-event.mgesture.dTheta  - the amount that the fingers rotated during this motion.
-event.mgesture.dDist   - the amount that the fingers pinched during this motion.
-event.mgesture.numFingers - the number of fingers used in the gesture.
-
-
-===========================================================================
-Notes
-===========================================================================
-For a complete example see test/testgesture.c
-
-Please direct questions/comments to:
-   jim.tla+sdl_touch@gmail.com

3rdparty/SDL-1.3.0-5387/README.iphoneos

@@ -1,111 +0,0 @@
-==============================================================================
-Building the Simple DirectMedia Layer for iPhone OS 2.0
-==============================================================================
-
-Requirements: Mac OS X v10.5 or later and the iPhone SDK.
-
-Instructions:
-1.  Open SDLiPhoneOS.xcodeproj (located in Xcode-iPhoneOS/SDL) in XCode.
-2.  Set Project->Set Active SDK to "Use Project Settings"
-3.  Select your desired target, and hit build.
-
-There are three build targets:
-- StaticLibiPhoneOS:
-	Build SDL as a statically linked (armv6) library for iPhone OS 2.0.
-- StaticLibSimulator:
-	Build SDL as a statically linked (x86) library for the iPhone Simulator
-- Template:
-	Package a project template together with the SDL for iPhone static libraries and copies of the SDL headers.  The template includes proper references to the SDL library and headers, skeleton code for a basic SDL program, and placeholder graphics for the application icon and startup screen.
-
-==============================================================================
-Using the Simple DirectMedia Layer for iPhone OS 2.0
-==============================================================================
-
-Here is the easiest method:
-1.  Build the SDL libraries (libSDLiPhoneOS.a and libSDLSimulator.a) and the iPhone SDL Application template.
-1.  Install the iPhone SDL Application template by copying it to one of XCode's template directories.  I recommend creating a directory called "SDL" in "/Developer/Platforms/iPhoneOS.platform/Developer/Library/XCode/Project Templates/" and placing it there.
-2.  Start a new project using the template.  The project should be immediately ready for use with SDL.
-
-Here is a more manual method:
-1.  Create a new iPhone view based application.
-2.  Build the SDL static libraries (libSDLiPhoneOS.a and libSDLSimulator.a) for iPhone and include them in your project.  XCode will ignore the library that is not currently of the correct architecture, hence your app will work both on iPhone and in the iPhone Simulator.
-3.  Include the SDL header files in your project.
-4.  Remove the ApplicationDelegate.h and ApplicationDelegate.m files -- SDL for iPhone provides its own UIApplicationDelegate.  Remove MainWindow.xib -- SDL for iPhone produces its user interface programmatically.
-5.  Delete the contents of main.m and program your app as a regular SDL program instead.  You may replace main.m with your own main.c, but you must tell XCode not to use the project prefix file, as it includes Objective-C code.
-
-==============================================================================
-Notes -- Accelerometer as Joystick
-==============================================================================
-
-SDL for iPhone supports polling the built in accelerometer as a joystick device.  For an example on how to do this, see the accelerometer.c in the demos directory.
-
-The main thing to note when using the accelerometer with SDL is that while the iPhone natively reports accelerometer as floating point values in units of g-force, SDL_JoystickGetAxis reports joystick values as signed integers.  Hence, in order to convert between the two, some clamping and scaling is necessary on the part of the iPhone SDL joystick driver.  To convert SDL_JoystickGetAxis reported values BACK to units of g-force, simply multiply the values by SDL_IPHONE_MAX_GFORCE / 0x7FFF.
-
-==============================================================================
-Notes -- OpenGL ES
-==============================================================================
-
-Your SDL application for iPhone uses OpenGL ES for video by default.
-
-OpenGL ES for iPhone supports several display pixel formats, such as RGBA8 and RGB565, which provide a 32 bit and 16 bit color buffer respectively.  By default, the implementation uses RGB565, but you may use RGBA8 by setting each color component to 8 bits in SDL_GL_SetAttribute.
-
-If your application doesn't use OpenGL's depth buffer, you may find significant performance improvement by setting SDL_GL_DEPTH_SIZE to 0.
-
-Finally, if your application completely redraws the screen each frame, you may find significant performance improvement by setting the attribute SDL_GL_RETAINED_BACKING to 1.
-
-==============================================================================
-Notes -- Keyboard
-==============================================================================
-
-SDL for iPhone contains several additional functions related to keyboard visibility.  These functions are not part of the SDL standard API, but are necessary for revealing and hiding the iPhone's virtual onscreen keyboard.  You can use them in your own applications by including a copy of the SDL_uikitkeyboard.h header (located in src/video/uikit) in your project.
-
-int SDL_iPhoneKeyboardShow(SDL_Window * window) 
-	-- reveals the onscreen keyboard.  Returns 0 on success and -1 on error.
-int SDL_iPhoneKeyboardHide(SDL_Window * window) 
-	-- hides the onscreen keyboard.  Returns 0 on success and -1 on error.
-SDL_bool SDL_iPhoneKeyboardIsShown(SDL_Window * window) 
-	-- returns whether or not the onscreen keyboard is currently visible.
-int SDL_iPhoneKeyboardToggle(SDL_Window * window) 	
-	-- toggles the visibility of the onscreen keyboard.  Returns 0 on success and -1 on error.
-
-==============================================================================
-Notes -- Reading and Writing files
-==============================================================================
-
-Each application installed on iPhone resides in a sandbox which includes its own Application Home directory.  Your application may not access files outside this directory.
-
-Once your application is installed its directory tree looks like:
-
-MySDLApp Home/
-	MySDLApp.app
-	Documents/
-	Library/
-		Preferences/
-	tmp/
-
-When your SDL based iPhone application starts up, it sets the working directory to the main bundle (MySDLApp Home/MySDLApp.app), where your application resources are stored.  You cannot write to this directory.  Instead, I advise you to write document files to "../Documents/" and preferences to "../Library/Preferences".  
-
-More information on this subject is available here:
-http://developer.apple.com/iphone/library/documentation/iPhone/Conceptual/iPhoneOSProgrammingGuide/ApplicationEnvironment/chapter_6_section_3.html#//apple_ref/doc/uid/TP40007072-CH7-SW21
-
-==============================================================================
-Notes -- iPhone SDL limitations
-==============================================================================
-
-Windows:
-	Full-size, single window applications only.  You cannot create multi-window SDL applications for iPhone OS.  The application window will fill the display, though you have the option of turning on or off the menu-bar (pass SDL_CreateWindow the flag SDL_WINDOW_BORDERLESS).  Presently, landscape mode is not supported.
-
-Video:
-	For real time frame-rates, you are advised to use strictly SDL 1.3 video calls.  Using compatibility video calls uploads an OpenGL texture for each frame drawn, and this operation is excruciatingly slow.
-
-Textures:
-	SDL for iPhone Textures supports only SDL_PIXELFORMAT_ABGR8888 and SDL_PIXELFORMAT_RGB24 pixel formats.  This is because texture support in SDL for iPhone is done through OpenGL ES, which supports fewer pixel formats than OpenGL, will not re-order pixel data for you, and has no support for color-paletted formats (without extensions).
-
-Audio:
-	SDL for iPhone does not yet support audio input.
-
-Loading Shared Objects:
-	This is disabled by default since it seems to break the terms of the iPhone SDK agreement.  It can be re-enabled in SDL_config_iphoneos.h.
-
-
-

3rdparty/SDL-1.3.0-5387/README.pandora

@@ -1,16 +0,0 @@
-SDL 1.3 with open pandora console support ( http://openpandora.org/ )
-=====================================================================
-
-- A pandora specific video driver was writed to allow SDL 1.3 with OpenGL ES
-support to work on the pandora under the framebuffer. This driver do not have
-input support for now, so if you use it you will have to add your own control code.
-The video driver name is "pandora" so if you have problem running it from
-the framebuffer, try to set the following variable before starting your application :
-"export SDL_VIDEODRIVER=pandora"
-
-- OpenGL ES support was added to the x11 driver, so it's working like the normal
-x11 driver one with OpenGLX support, with SDL input event's etc..
-
-
-David Carré (Cpasjuste)
-cpasjuste@gmail.com

3rdparty/SDL-1.3.0-5387/README.touch

@@ -1,101 +0,0 @@
-===========================================================================
-System Specific Notes
-===========================================================================
-Linux:
-The linux touch system is currently based off event streams, and proc/bus/devices. The active user must be given permissions to read /dev/input/TOUCHDEVICE, where TOUCHDEVICE is the event stream for your device. Currently only Wacom tablets are supported. If you have an unsupported tablet contact me at jim.tla+sdl_touch@gmail.com and I will help you get support for it.
-
-Mac: 
-The Mac and Iphone API's are pretty. If your touch device supports them then you'll be fine. If it doesn't, then there isn't much we can do.
-
-iPhone: 
-Works out of box.
-
-Windows:
-Unfortunately there is no windows support as of yet. Support for Windows 7 is planned, but we currently have no way to test. If you have a Windows 7 WM_TOUCH supported device, and are willing to help test please contact me at jim.tla+sdl_touch@gmail.com
-
-===========================================================================
-Events
-===========================================================================
-SDL_FINGERDOWN:
-Sent when a finger (or stylus) is placed on a touch device.
-Fields:
-event.tfinger.touchId  - the Id of the touch device.
-event.tfinger.fingerId - the Id of the finger which just went down.
-event.tfinger.x        - the x coordinate of the touch (0..touch.xres)
-event.tfinger.y        - the y coordinate of the touch (0..touch.yres)
-event.tfinger.pressure - the pressure of the touch (0..touch.pressureres)
-
-SDL_FINGERMOTION:
-Sent when a finger (or stylus) is moved on the touch device.
-Fields:
-Same as FINGERDOWN but with additional:
-event.tfginer.dx       - change in x coordinate during this motion event.
-event.tfginer.dy       - change in y coordinate during this motion event.
-
-SDL_FINGERMOTION:
-Sent when a finger (or stylus) is lifted from the touch device.
-Fields:
-Same as FINGERDOWN.
-
-
-===========================================================================
-Functions
-===========================================================================
-SDL provides the ability to access the underlying Touch and Finger structures.
-These structures should _never_ be modified.
-
-The following functions are included from SDL_Touch.h
-
-To get a SDL_Touch device call SDL_GetTouch(touchId). 
-This returns an SDL_Touch*. 
-IMPORTANT: If the touch has been removed, or there is no touch with the given ID, SDL_GetTouch will return null. Be sure to check for this!
-
-An SDL_Touch has the following fields:
->xres,yres,pressures:
-	The resolution at which x,y, and pressure values are reported. Currently these will always be equal to 2^15, but this may not always be the case. 
-
->pressure_max, pressure_min, x_max, x_min, y_max, y_min
-	Which give, respectively, the maximum and minumum values that the touch digitizer can return for pressure, x coordiniate, and y coordinate AS REPORTED BY THE OPERATING SYSTEM.
-On Mac/iPhone systems _max will always be 0, and _min will always be 1. 
-
->native_xres,native_yres,native_pressureres:
-	The native resolution of the touch device AS REPORTED BY THE OPERATING SYSTEM.
-On Mac/iPhone systems these will always be 1.
-
->num_fingers:
-	The number of fingers currently down on the device.
-
->fingers:
-	An array of pointers to the fingers which are on the device.
-
-
-The most common reason to access a touch device is to normalize inputs. This would be accomplished by code like the following:
-
-      SDL_Touch* inTouch = SDL_GetTouch(event.tfinger.touchId);
-      if(inTouch == NULL) continue; //The touch has been removed
-
-      float x = ((float)event.tfinger.x)/inTouch->xres;
-      float y = ((float)event.tfinger.y)/inTouch->yres;
-
-
-
-To get an SDL_Finger, call SDL_GetFinger(touch,fingerId), where touch is a pointer to an SDL_Touch device, and fingerId is the id of the requested finger.
-This returns an SDL_Finger*, or null if the finger does not exist, or has been removed.
-An SDL_Finger is guaranteed to be persistent for the duration of a touch, but it will be de-allocated as soon as the finger is removed. This occurs when the SDL_FINGERUP event is _added_ to the event queue, and thus _before_ the FINGERUP event is polled. 
-As a result, be very careful to check for null return values.
-
-An SDL_Finger has the following fields:
->x,y,pressure:
-	The current coordinates of the touch.
->xdelta,ydelta: 
-	The change in position resulting from the last finger motion.
->last_x, last_y, last_pressure:
-	 The previous coordinates of the touch.
-
-===========================================================================
-Notes
-===========================================================================
-For a complete example see test/testgesture.c
-
-Please direct questions/comments to:
-   jim.tla+sdl_touch@gmail.com

3rdparty/SDL-1.3.0-5387/SDL-1.3/SDL-1.3.cbp

@@ -1,667 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
-<CodeBlocks_project_file>
-	<FileVersion major="1" minor="6" />
-	<Project>
-		<Option title="SDL-1.3" />
-		<Option pch_mode="2" />
-		<Option compiler="gcc" />
-		<Build>
-			<Target title="Debug">
-				<Option output="../../../deps/debug/libSDL-1.3.a" prefix_auto="0" extension_auto="0" />
-				<Option working_dir="" />
-				<Option object_output="obj/Debug/" />
-				<Option type="2" />
-				<Option compiler="gcc" />
-				<Option createDefFile="1" />
-				<Compiler>
-					<Add option="-Wall" />
-					<Add option="-g" />
-				</Compiler>
-			</Target>
-			<Target title="Release">
-				<Option output="../../../deps/release/libSDL-1.3.a" prefix_auto="0" extension_auto="0" />
-				<Option working_dir="" />
-				<Option object_output="obj/Release/" />
-				<Option type="2" />
-				<Option compiler="gcc" />
-				<Option createDefFile="1" />
-				<Compiler>
-					<Add option="-O3" />
-					<Add option="-Wall" />
-				</Compiler>
-				<Linker>
-					<Add option="-s" />
-				</Linker>
-			</Target>
-		</Build>
-		<Compiler>
-			<Add option="-mmmx" />
-			<Add option="-msse" />
-			<Add option="-fvisibility=hidden" />
-			<Add option="-m32" />
-			<Add option="-fPIC" />
-			<Add option="-MMD" />
-			<Add option="-MT" />
-			<Add option="-DPIC" />
-			<Add option="-D_REENTRANT" />
-			<Add option="-D__LINUX__" />
-			<Add directory="../include" />
-		</Compiler>
-		<Linker>
-			<Add option="-shared" />
-			<Add option="-m32" />
-			<Add library="GL" />
-		</Linker>
-		<Unit filename="../include/SDL.h" />
-		<Unit filename="../include/SDL_assert.h" />
-		<Unit filename="../include/SDL_atomic.h" />
-		<Unit filename="../include/SDL_audio.h" />
-		<Unit filename="../include/SDL_blendmode.h" />
-		<Unit filename="../include/SDL_clipboard.h" />
-		<Unit filename="../include/SDL_compat.h" />
-		<Unit filename="../include/SDL_config.h" />
-		<Unit filename="../include/SDL_config_linux.h" />
-		<Unit filename="../include/SDL_copying.h" />
-		<Unit filename="../include/SDL_cpuinfo.h" />
-		<Unit filename="../include/SDL_endian.h" />
-		<Unit filename="../include/SDL_error.h" />
-		<Unit filename="../include/SDL_events.h" />
-		<Unit filename="../include/SDL_gesture.h" />
-		<Unit filename="../include/SDL_haptic.h" />
-		<Unit filename="../include/SDL_hints.h" />
-		<Unit filename="../include/SDL_input.h" />
-		<Unit filename="../include/SDL_joystick.h" />
-		<Unit filename="../include/SDL_keyboard.h" />
-		<Unit filename="../include/SDL_keycode.h" />
-		<Unit filename="../include/SDL_loadso.h" />
-		<Unit filename="../include/SDL_log.h" />
-		<Unit filename="../include/SDL_main.h" />
-		<Unit filename="../include/SDL_mouse.h" />
-		<Unit filename="../include/SDL_mutex.h" />
-		<Unit filename="../include/SDL_name.h" />
-		<Unit filename="../include/SDL_opengl.h" />
-		<Unit filename="../include/SDL_opengles.h" />
-		<Unit filename="../include/SDL_opengles2.h" />
-		<Unit filename="../include/SDL_pixels.h" />
-		<Unit filename="../include/SDL_platform.h" />
-		<Unit filename="../include/SDL_power.h" />
-		<Unit filename="../include/SDL_quit.h" />
-		<Unit filename="../include/SDL_rect.h" />
-		<Unit filename="../include/SDL_render.h" />
-		<Unit filename="../include/SDL_revision.h" />
-		<Unit filename="../include/SDL_rwops.h" />
-		<Unit filename="../include/SDL_scancode.h" />
-		<Unit filename="../include/SDL_shape.h" />
-		<Unit filename="../include/SDL_stdinc.h" />
-		<Unit filename="../include/SDL_surface.h" />
-		<Unit filename="../include/SDL_syswm.h" />
-		<Unit filename="../include/SDL_thread.h" />
-		<Unit filename="../include/SDL_timer.h" />
-		<Unit filename="../include/SDL_touch.h" />
-		<Unit filename="../include/SDL_types.h" />
-		<Unit filename="../include/SDL_version.h" />
-		<Unit filename="../include/SDL_video.h" />
-		<Unit filename="../include/begin_code.h" />
-		<Unit filename="../include/close_code.h" />
-		<Unit filename="../src/SDL.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/SDL_assert.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/SDL_assert_c.h" />
-		<Unit filename="../src/SDL_compat.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/SDL_error.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/SDL_error_c.h" />
-		<Unit filename="../src/SDL_fatal.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/SDL_fatal.h" />
-		<Unit filename="../src/SDL_hints.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/SDL_log.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/atomic/SDL_atomic.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/atomic/SDL_spinlock.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/audio/SDL_audio.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/audio/SDL_audio_c.h" />
-		<Unit filename="../src/audio/SDL_audiocvt.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/audio/SDL_audiodev.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/audio/SDL_audiodev_c.h" />
-		<Unit filename="../src/audio/SDL_audiomem.h" />
-		<Unit filename="../src/audio/SDL_audiotypecvt.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/audio/SDL_mixer.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/audio/SDL_mixer_MMX.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/audio/SDL_mixer_MMX.h" />
-		<Unit filename="../src/audio/SDL_mixer_MMX_VC.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/audio/SDL_mixer_MMX_VC.h" />
-		<Unit filename="../src/audio/SDL_mixer_m68k.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/audio/SDL_mixer_m68k.h" />
-		<Unit filename="../src/audio/SDL_sysaudio.h" />
-		<Unit filename="../src/audio/SDL_wave.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/audio/SDL_wave.h" />
-		<Unit filename="../src/audio/alsa/SDL_alsa_audio.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/audio/alsa/SDL_alsa_audio.h" />
-		<Unit filename="../src/audio/android/SDL_androidaudio.h" />
-		<Unit filename="../src/audio/arts/SDL_artsaudio.h" />
-		<Unit filename="../src/audio/baudio/SDL_beaudio.h" />
-		<Unit filename="../src/audio/bsd/SDL_bsdaudio.h" />
-		<Unit filename="../src/audio/disk/SDL_diskaudio.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/audio/disk/SDL_diskaudio.h" />
-		<Unit filename="../src/audio/dma/SDL_dmaaudio.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/audio/dma/SDL_dmaaudio.h" />
-		<Unit filename="../src/audio/dmedia/SDL_irixaudio.h" />
-		<Unit filename="../src/audio/dsp/SDL_dspaudio.h" />
-		<Unit filename="../src/audio/dummy/SDL_dummyaudio.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/audio/dummy/SDL_dummyaudio.h" />
-		<Unit filename="../src/audio/esd/SDL_esdaudio.h" />
-		<Unit filename="../src/audio/fusionsound/SDL_fsaudio.h" />
-		<Unit filename="../src/audio/iphoneos/SDL_coreaudio_iphone.h" />
-		<Unit filename="../src/audio/macosx/SDL_coreaudio.h" />
-		<Unit filename="../src/audio/mme/SDL_mmeaudio.h" />
-		<Unit filename="../src/audio/nas/SDL_nasaudio.h" />
-		<Unit filename="../src/audio/nds/SDL_ndsaudio.h" />
-		<Unit filename="../src/audio/paudio/SDL_paudio.h" />
-		<Unit filename="../src/audio/pulseaudio/SDL_pulseaudio.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/audio/pulseaudio/SDL_pulseaudio.h" />
-		<Unit filename="../src/audio/qsa/SDL_qsa_audio.h" />
-		<Unit filename="../src/audio/sun/SDL_sunaudio.h" />
-		<Unit filename="../src/audio/ums/SDL_umsaudio.h" />
-		<Unit filename="../src/audio/windib/SDL_dibaudio.h" />
-		<Unit filename="../src/audio/windx5/SDL_dx5audio.h" />
-		<Unit filename="../src/audio/windx5/directx.h" />
-		<Unit filename="../src/core/android/SDL_android.h" />
-		<Unit filename="../src/core/windows/SDL_windows.h" />
-		<Unit filename="../src/cpuinfo/SDL_cpuinfo.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/events/SDL_clipboardevents.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/events/SDL_clipboardevents_c.h" />
-		<Unit filename="../src/events/SDL_events.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/events/SDL_events_c.h" />
-		<Unit filename="../src/events/SDL_gesture.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/events/SDL_gesture_c.h" />
-		<Unit filename="../src/events/SDL_keyboard.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/events/SDL_keyboard_c.h" />
-		<Unit filename="../src/events/SDL_mouse.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/events/SDL_mouse_c.h" />
-		<Unit filename="../src/events/SDL_quit.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/events/SDL_sysevents.h" />
-		<Unit filename="../src/events/SDL_touch.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/events/SDL_touch_c.h" />
-		<Unit filename="../src/events/SDL_windowevents.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/events/SDL_windowevents_c.h" />
-		<Unit filename="../src/events/blank_cursor.h" />
-		<Unit filename="../src/events/default_cursor.h" />
-		<Unit filename="../src/events/scancodes_darwin.h" />
-		<Unit filename="../src/events/scancodes_linux.h" />
-		<Unit filename="../src/events/scancodes_windows.h" />
-		<Unit filename="../src/events/scancodes_xfree86.h" />
-		<Unit filename="../src/file/SDL_rwops.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/file/cocoa/SDL_rwopsbundlesupport.h" />
-		<Unit filename="../src/haptic/SDL_haptic.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/haptic/SDL_haptic_c.h" />
-		<Unit filename="../src/haptic/SDL_syshaptic.h" />
-		<Unit filename="../src/haptic/dummy/SDL_syshaptic.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/haptic/linux/SDL_syshaptic.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/joystick/SDL_joystick.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/joystick/SDL_joystick_c.h" />
-		<Unit filename="../src/joystick/SDL_sysjoystick.h" />
-		<Unit filename="../src/joystick/darwin/SDL_sysjoystick_c.h" />
-		<Unit filename="../src/joystick/dummy/SDL_sysjoystick.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/joystick/iphoneos/SDLUIAccelerationDelegate.h" />
-		<Unit filename="../src/joystick/linux/SDL_sysjoystick.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/joystick/linux/SDL_sysjoystick_c.h" />
-		<Unit filename="../src/joystick/windows/SDL_dxjoystick_c.h" />
-		<Unit filename="../src/libm/e_atan2.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/libm/e_log.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/libm/e_pow.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/libm/e_rem_pio2.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/libm/e_sqrt.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/libm/k_cos.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/libm/k_rem_pio2.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/libm/k_sin.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/libm/math.h" />
-		<Unit filename="../src/libm/math_private.h" />
-		<Unit filename="../src/libm/s_atan.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/libm/s_copysign.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/libm/s_cos.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/libm/s_fabs.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/libm/s_floor.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/libm/s_scalbn.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/libm/s_sin.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/loadso/dlopen/SDL_sysloadso.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/main/beos/SDL_BeApp.h" />
-		<Unit filename="../src/power/SDL_power.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/power/linux/SDL_syspower.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/render/SDL_render.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/render/SDL_sysrender.h" />
-		<Unit filename="../src/render/SDL_yuv_mmx.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/render/SDL_yuv_sw.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/render/SDL_yuv_sw_c.h" />
-		<Unit filename="../src/render/mmx.h" />
-		<Unit filename="../src/render/opengl/SDL_glfuncs.h" />
-		<Unit filename="../src/render/opengl/SDL_render_gl.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/render/opengl/SDL_shaders_gl.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/render/opengl/SDL_shaders_gl.h" />
-		<Unit filename="../src/render/opengles2/SDL_shaders_gles2.h" />
-		<Unit filename="../src/render/software/SDL_blendfillrect.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/render/software/SDL_blendfillrect.h" />
-		<Unit filename="../src/render/software/SDL_blendline.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/render/software/SDL_blendline.h" />
-		<Unit filename="../src/render/software/SDL_blendpoint.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/render/software/SDL_blendpoint.h" />
-		<Unit filename="../src/render/software/SDL_draw.h" />
-		<Unit filename="../src/render/software/SDL_drawline.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/render/software/SDL_drawline.h" />
-		<Unit filename="../src/render/software/SDL_drawpoint.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/render/software/SDL_drawpoint.h" />
-		<Unit filename="../src/render/software/SDL_render_sw.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/render/software/SDL_render_sw_c.h" />
-		<Unit filename="../src/stdlib/SDL_getenv.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/stdlib/SDL_iconv.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/stdlib/SDL_malloc.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/stdlib/SDL_qsort.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/stdlib/SDL_stdlib.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/stdlib/SDL_string.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/thread/SDL_systhread.h" />
-		<Unit filename="../src/thread/SDL_thread.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/thread/SDL_thread_c.h" />
-		<Unit filename="../src/thread/beos/SDL_systhread_c.h" />
-		<Unit filename="../src/thread/generic/SDL_sysmutex_c.h" />
-		<Unit filename="../src/thread/generic/SDL_systhread_c.h" />
-		<Unit filename="../src/thread/irix/SDL_systhread_c.h" />
-		<Unit filename="../src/thread/nds/SDL_syscond_c.h" />
-		<Unit filename="../src/thread/nds/SDL_sysmutex_c.h" />
-		<Unit filename="../src/thread/nds/SDL_syssem_c.h" />
-		<Unit filename="../src/thread/nds/SDL_systhread_c.h" />
-		<Unit filename="../src/thread/pthread/SDL_syscond.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/thread/pthread/SDL_sysmutex.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/thread/pthread/SDL_sysmutex_c.h" />
-		<Unit filename="../src/thread/pthread/SDL_syssem.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/thread/pthread/SDL_systhread.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/thread/pthread/SDL_systhread_c.h" />
-		<Unit filename="../src/thread/windows/SDL_systhread_c.h" />
-		<Unit filename="../src/thread/windows/win_ce_semaphore.h" />
-		<Unit filename="../src/timer/SDL_timer.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/timer/SDL_timer_c.h" />
-		<Unit filename="../src/timer/dummy/SDL_systimer.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/timer/unix/SDL_systimer.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/video/SDL_RLEaccel.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/video/SDL_RLEaccel_c.h" />
-		<Unit filename="../src/video/SDL_blit.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/video/SDL_blit.h" />
-		<Unit filename="../src/video/SDL_blit_0.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/video/SDL_blit_1.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/video/SDL_blit_A.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/video/SDL_blit_N.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/video/SDL_blit_auto.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/video/SDL_blit_auto.h" />
-		<Unit filename="../src/video/SDL_blit_copy.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/video/SDL_blit_copy.h" />
-		<Unit filename="../src/video/SDL_blit_slow.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/video/SDL_blit_slow.h" />
-		<Unit filename="../src/video/SDL_bmp.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/video/SDL_clipboard.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/video/SDL_fillrect.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/video/SDL_pixels.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/video/SDL_pixels_c.h" />
-		<Unit filename="../src/video/SDL_rect.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/video/SDL_rect_c.h" />
-		<Unit filename="../src/video/SDL_shape.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/video/SDL_shape_internals.h" />
-		<Unit filename="../src/video/SDL_stretch.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/video/SDL_surface.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/video/SDL_sysvideo.h" />
-		<Unit filename="../src/video/SDL_video.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/video/Xext/XME/xme.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/video/Xext/Xinerama/Xinerama.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/video/Xext/Xv/Xv.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/video/Xext/Xv/Xvlibint.h" />
-		<Unit filename="../src/video/Xext/Xxf86vm/XF86VMode.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/video/Xext/extensions/Xext.h" />
-		<Unit filename="../src/video/Xext/extensions/Xinerama.h" />
-		<Unit filename="../src/video/Xext/extensions/Xv.h" />
-		<Unit filename="../src/video/Xext/extensions/Xvlib.h" />
-		<Unit filename="../src/video/Xext/extensions/Xvproto.h" />
-		<Unit filename="../src/video/Xext/extensions/extutil.h" />
-		<Unit filename="../src/video/Xext/extensions/panoramiXext.h" />
-		<Unit filename="../src/video/Xext/extensions/panoramiXproto.h" />
-		<Unit filename="../src/video/Xext/extensions/xf86dga.h" />
-		<Unit filename="../src/video/Xext/extensions/xf86dga1.h" />
-		<Unit filename="../src/video/Xext/extensions/xf86dga1str.h" />
-		<Unit filename="../src/video/Xext/extensions/xf86dgastr.h" />
-		<Unit filename="../src/video/Xext/extensions/xf86vmode.h" />
-		<Unit filename="../src/video/Xext/extensions/xf86vmstr.h" />
-		<Unit filename="../src/video/android/SDL_androidevents.h" />
-		<Unit filename="../src/video/android/SDL_androidkeyboard.h" />
-		<Unit filename="../src/video/android/SDL_androidtouch.h" />
-		<Unit filename="../src/video/android/SDL_androidvideo.h" />
-		<Unit filename="../src/video/android/SDL_androidwindow.h" />
-		<Unit filename="../src/video/bwindow/SDL_BView.h" />
-		<Unit filename="../src/video/bwindow/SDL_BWin.h" />
-		<Unit filename="../src/video/bwindow/SDL_lowvideo.h" />
-		<Unit filename="../src/video/bwindow/SDL_sysevents_c.h" />
-		<Unit filename="../src/video/bwindow/SDL_sysmouse_c.h" />
-		<Unit filename="../src/video/bwindow/SDL_syswm_c.h" />
-		<Unit filename="../src/video/bwindow/SDL_sysyuv.h" />
-		<Unit filename="../src/video/cocoa/SDL_cocoaclipboard.h" />
-		<Unit filename="../src/video/cocoa/SDL_cocoaevents.h" />
-		<Unit filename="../src/video/cocoa/SDL_cocoakeyboard.h" />
-		<Unit filename="../src/video/cocoa/SDL_cocoamodes.h" />
-		<Unit filename="../src/video/cocoa/SDL_cocoamouse.h" />
-		<Unit filename="../src/video/cocoa/SDL_cocoaopengl.h" />
-		<Unit filename="../src/video/cocoa/SDL_cocoashape.h" />
-		<Unit filename="../src/video/cocoa/SDL_cocoavideo.h" />
-		<Unit filename="../src/video/cocoa/SDL_cocoawindow.h" />
-		<Unit filename="../src/video/directfb/SDL_DirectFB_WM.h" />
-		<Unit filename="../src/video/directfb/SDL_DirectFB_dyn.h" />
-		<Unit filename="../src/video/directfb/SDL_DirectFB_events.h" />
-		<Unit filename="../src/video/directfb/SDL_DirectFB_modes.h" />
-		<Unit filename="../src/video/directfb/SDL_DirectFB_mouse.h" />
-		<Unit filename="../src/video/directfb/SDL_DirectFB_opengl.h" />
-		<Unit filename="../src/video/directfb/SDL_DirectFB_render.h" />
-		<Unit filename="../src/video/directfb/SDL_DirectFB_video.h" />
-		<Unit filename="../src/video/directfb/SDL_DirectFB_window.h" />
-		<Unit filename="../src/video/dummy/SDL_nullevents.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/video/dummy/SDL_nullevents_c.h" />
-		<Unit filename="../src/video/dummy/SDL_nullframebuffer.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/video/dummy/SDL_nullframebuffer_c.h" />
-		<Unit filename="../src/video/dummy/SDL_nullvideo.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/video/dummy/SDL_nullvideo.h" />
-		<Unit filename="../src/video/nds/SDL_ndsevents_c.h" />
-		<Unit filename="../src/video/nds/SDL_ndsrender_c.h" />
-		<Unit filename="../src/video/nds/SDL_ndsvideo.h" />
-		<Unit filename="../src/video/pandora/SDL_pandora.h" />
-		<Unit filename="../src/video/pandora/SDL_pandora_events.h" />
-		<Unit filename="../src/video/uikit/SDL_uikitappdelegate.h" />
-		<Unit filename="../src/video/uikit/SDL_uikitevents.h" />
-		<Unit filename="../src/video/uikit/SDL_uikitkeyboard.h" />
-		<Unit filename="../src/video/uikit/SDL_uikitopengles.h" />
-		<Unit filename="../src/video/uikit/SDL_uikitopenglview.h" />
-		<Unit filename="../src/video/uikit/SDL_uikitvideo.h" />
-		<Unit filename="../src/video/uikit/SDL_uikitview.h" />
-		<Unit filename="../src/video/uikit/SDL_uikitwindow.h" />
-		<Unit filename="../src/video/uikit/jumphack.h" />
-		<Unit filename="../src/video/uikit/keyinfotable.h" />
-		<Unit filename="../src/video/windows/SDL_msctf.h" />
-		<Unit filename="../src/video/windows/SDL_vkeys.h" />
-		<Unit filename="../src/video/windows/SDL_windowsclipboard.h" />
-		<Unit filename="../src/video/windows/SDL_windowsevents.h" />
-		<Unit filename="../src/video/windows/SDL_windowsframebuffer.h" />
-		<Unit filename="../src/video/windows/SDL_windowskeyboard.h" />
-		<Unit filename="../src/video/windows/SDL_windowsmodes.h" />
-		<Unit filename="../src/video/windows/SDL_windowsmouse.h" />
-		<Unit filename="../src/video/windows/SDL_windowsopengl.h" />
-		<Unit filename="../src/video/windows/SDL_windowsshape.h" />
-		<Unit filename="../src/video/windows/SDL_windowsvideo.h" />
-		<Unit filename="../src/video/windows/SDL_windowswindow.h" />
-		<Unit filename="../src/video/windows/wmmsg.h" />
-		<Unit filename="../src/video/x11/SDL_x11clipboard.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/video/x11/SDL_x11clipboard.h" />
-		<Unit filename="../src/video/x11/SDL_x11dyn.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/video/x11/SDL_x11dyn.h" />
-		<Unit filename="../src/video/x11/SDL_x11events.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/video/x11/SDL_x11events.h" />
-		<Unit filename="../src/video/x11/SDL_x11framebuffer.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/video/x11/SDL_x11framebuffer.h" />
-		<Unit filename="../src/video/x11/SDL_x11keyboard.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/video/x11/SDL_x11keyboard.h" />
-		<Unit filename="../src/video/x11/SDL_x11modes.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/video/x11/SDL_x11modes.h" />
-		<Unit filename="../src/video/x11/SDL_x11mouse.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/video/x11/SDL_x11mouse.h" />
-		<Unit filename="../src/video/x11/SDL_x11opengl.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/video/x11/SDL_x11opengl.h" />
-		<Unit filename="../src/video/x11/SDL_x11opengles.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/video/x11/SDL_x11opengles.h" />
-		<Unit filename="../src/video/x11/SDL_x11shape.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/video/x11/SDL_x11shape.h" />
-		<Unit filename="../src/video/x11/SDL_x11sym.h" />
-		<Unit filename="../src/video/x11/SDL_x11touch.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/video/x11/SDL_x11touch.h" />
-		<Unit filename="../src/video/x11/SDL_x11video.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/video/x11/SDL_x11video.h" />
-		<Unit filename="../src/video/x11/SDL_x11window.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/video/x11/SDL_x11window.h" />
-		<Unit filename="../src/video/x11/imKStoUCS.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/video/x11/imKStoUCS.h" />
-		<Extensions>
-			<code_completion />
-			<debugger />
-			<envvars />
-		</Extensions>
-	</Project>
-</CodeBlocks_project_file>

3rdparty/SDL-1.3.0-5387/SDL.spec.in

@@ -1,113 +0,0 @@
-Summary: Simple DirectMedia Layer
-Name: SDL
-Version: @SDL_VERSION@
-Release: 1
-Source: http://www.libsdl.org/release/%{name}-%{version}.tar.gz
-URL: http://www.libsdl.org/
-License: LGPL
-Group: System Environment/Libraries
-BuildRoot: %{_tmppath}/%{name}-%{version}-buildroot
-Prefix: %{_prefix}
-%ifos linux
-Provides: libSDL-1.2.so.0
-%endif
-
-%define __defattr %defattr(-,root,root)
-%define __soext so
-
-%description
-This is the Simple DirectMedia Layer, a generic API that provides low
-level access to audio, keyboard, mouse, and display framebuffer across
-multiple platforms.
-
-%package devel
-Summary: Libraries, includes and more to develop SDL applications.
-Group: Development/Libraries
-Requires: %{name} = %{version}
-
-%description devel
-This is the Simple DirectMedia Layer, a generic API that provides low
-level access to audio, keyboard, mouse, and display framebuffer across
-multiple platforms.
-
-This is the libraries, include files and other resources you can use
-to develop SDL applications.
-
-
-%prep
-%setup -q 
-
-%build
-%ifos linux
-CFLAGS="$RPM_OPT_FLAGS" ./configure --prefix=%{prefix} --disable-video-directfb
-%else
-%configure
-%endif
-make
-
-%install
-rm -rf $RPM_BUILD_ROOT
-%ifos linux
-make install prefix=$RPM_BUILD_ROOT%{prefix} \
-             bindir=$RPM_BUILD_ROOT%{_bindir} \
-             libdir=$RPM_BUILD_ROOT%{_libdir} \
-             includedir=$RPM_BUILD_ROOT%{_includedir} \
-             datadir=$RPM_BUILD_ROOT%{_datadir} \
-             mandir=$RPM_BUILD_ROOT%{_mandir}
-ln -s libSDL-1.2.so.0 $RPM_BUILD_ROOT%{_libdir}/libSDL-1.1.so.0
-%else
-%makeinstall
-%endif
-
-%clean
-rm -rf $RPM_BUILD_ROOT
-
-%files
-%{__defattr}
-%doc README-SDL.txt COPYING CREDITS BUGS
-%{_libdir}/lib*.%{__soext}.*
-
-%files devel
-%{__defattr}
-%doc README README-SDL.txt COPYING CREDITS BUGS WhatsNew
-%doc docs/index.html docs/html
-%{_bindir}/*-config
-%{_libdir}/lib*.a
-%{_libdir}/lib*.la
-%{_libdir}/lib*.%{__soext}
-%dir %{_includedir}/SDL
-%{_includedir}/SDL/*.h
-%{_libdir}/pkgconfig/sdl.pc
-%{_datadir}/aclocal/*
-%{_mandir}/man3/*
-
-%changelog
-* Tue May 16 2006 Sam Lantinga <slouken@libsdl.org>
-- Removed support for Darwin, due to build problems on ps2linux
-
-* Mon Jan 03 2004 Anders Bjorklund <afb@algonet.se>
-- Added support for Darwin, updated spec file
-
-* Wed Jan 19 2000 Sam Lantinga <slouken@libsdl.org>
-- Re-integrated spec file into SDL distribution
-- 'name' and 'version' come from configure 
-- Some of the documentation is devel specific
-- Removed SMP support from %build - it doesn't work with libtool anyway
-
-* Tue Jan 18 2000 Hakan Tandogan <hakan@iconsult.com>
-- Hacked Mandrake sdl spec to build 1.1
-
-* Sun Dec 19 1999 John Buswell <johnb@mandrakesoft.com>
-- Build Release
-
-* Sat Dec 18 1999 John Buswell <johnb@mandrakesoft.com>
-- Add symlink for libSDL-1.0.so.0 required by sdlbomber
-- Added docs
-
-* Thu Dec 09 1999 Lenny Cartier <lenny@mandrakesoft.com>
-- v 1.0.0
-
-* Mon Nov  1 1999 Chmouel Boudjnah <chmouel@mandrakesoft.com>
-- First spec file for Mandrake distribution.
-
-# end of file

3rdparty/SDL-1.3.0-5387/TODO

@@ -1,42 +0,0 @@
-Eli Gottlieb's checklist for the GSOC shaped windows project.  Dated July 9, 2010.
-1. Enable proper linking of the X11 implementation and test it.
---> Find the place in the build system for platform-specific linking flags.  STATUS: DONE
---> Add a linker flag to bring in libXext.a. STATUS: DONE.
-2. Build the Win32 implementation of shaped-windows functionality.
---> Add driver functions to the SDL_ShapeDriver in the Win32 driver's SDL_DisplayDevice at the proper point in the code.  STATUS: CHECK.
---> Add a hook in the Windows resize-window code to call Win32_ResizeWindowShape().  STATUS: CHECK.
---> Get the Windows code to build and run properly.  STATUS: IN PROGRESS.
-3. Enable building the testeyes program.
---> Reprogram it to use the latest shaped-windows API.  STATUS: CHECK.
---> Get it, along with the rest of the test suite in my branch, building successfully.  STATUS: DONE.
---> Debug testeyes and the platform-specific shaped-window implementations in tandem.  STATUS: IN PROGRESS.
-4. Implement the SDL shaped-windows API for Mac OS X using Cocoa.  STATUS: IN PROGRESS
---> Locate (once more) the API documentation for shaped windows under Cocoa.  STATUS: NEARLY FINISHED.
---> Design and encode a version of SDL_ShapeData for Cocoa.  STATUS: IN PROGRESS.
---> Write Cocoa_CreateShaper().  STATUS: MOSTLY DONE, AFAIK.
---> Write Cocoa_ResizeWindowShape().  STATUS: DONE, AFAIK.
---> Write Cocoa_SetWindowShape().  STATUS: IN PROGRESS.
---> If necessary, implement functionality adjunct to SDL_CalculateShapeBitmap() for Cocoa usage.
-5. Use testeyes to debug all implementations. STATUS: SPRINT + 2.
---> Debug Cocoa implementation.
---> Debug Win32 implementation.
---> Debug X11 implementation (again).
-
-1.3 release checklist:
- * http://wiki.libsdl.org/moin.cgi/Roadmap
-
- * See why windows are being rearranged.  Is the shield window not up?
- * Make sure you can create and show a fullscreen window in one step
- * Figure out how to handle OpenGL context lost on Mac OS X (does it happen?)
- * Write automated test case for multi-draw APIs
- * Make sure you can build SDL without the renderer to slim it down a bunch
- * Implement assertion code on iPhone
- * Add __WINDOWS__ in addition to __WIN32__
-
- * Check 1.2 revisions:
-	3554 - Need to resolve semantics for locking keys on different platforms
-	4874 - Do we want screen rotation?  At what level?
-	4974 - Windows file code needs to convert UTF-8 to Unicode, but we don't need to tap dance for Windows 95/98
-	4484, 4485 - Verify that SDL's Windows keyboard handling works correctly
-	4865 - See if this is still needed (mouse coordinate clamping)
-	4866 - See if this is still needed (blocking window repositioning)

3rdparty/SDL-1.3.0-5387/UNDER_CONSTRUCTION.txt

@@ -1 +0,0 @@
-WARNING: This code is under construction, may not build, and is unstable!

3rdparty/SDL-1.3.0-5387/VisualC.html

@@ -1,157 +0,0 @@
-<HTML>
-	<HEAD>
-		<TITLE>Using SDL with Microsoft Visual C++</TITLE>
-	</HEAD>
-	<BODY>
-		<H1>
-			Using SDL with Microsoft Visual C++ 5,6&nbsp;and 7
-		</H1>
-		<H3>
-			by <A HREF="mailto:snowlion@sprynet.com">Lion Kimbro </A>and additions by <A HREF="mailto:james@conceptofzero.net">
-				James Turk</A>
-		</H3>
-		<p>
-			You can either use the precompiled libraries from <A HREF="http://www.libsdl.org/download.php">
-				the SDL Download web site </A>, or you can build SDL yourself.
-		</p>
-		<H3>
-			Building SDL
-		</H3>
-		<P>
-			Go into the VisualC directory and double-click on the VC++ file "<CODE>SDL.dsw</CODE>" <STRONG><FONT color="#009900">("<CODE>SDL.sln</CODE>")</FONT></STRONG>. This should open up the IDE.
-		</P>
-		<P>
-			You may be prompted at this point to upgrade the workspace, should you be using 
-			a more recent version of Visual C++. If so, allow the workspace to be upgraded.
-		</P>
-		<P>
-			Build the <CODE>.dll</CODE> and <CODE>.lib</CODE> files.
-		</P>
-		<P>
-			This is done by right clicking on each project in turn (Projects are listed in 
-			the Workspace panel in the FileView tab), and selecting "Build".
-		</P>
-		<P>
-			If you get an error about SDL_config.h being missing, you should
-			copy include/SDL_config.h.default to include/SDL_config.h and try again.
-		</P>
-		<P>
-			You may get a few warnings, but you should not get any errors. You do have to 
-			have at least the DirectX 5 SDK installed, however. The latest 
-			version of DirectX can be downloaded or purchased on a cheap CD (my 
-			recommendation) from <A HREF="http://www.microsoft.com">Microsoft </A>.
-		</P>
-		<P>
-			Later, we will refer to the following .lib and .dll files that have just been 
-			generated:
-		</P>
-		<ul>
-    <li> SDL.dll</li>
-    <li> SDL.lib</li>
-    <li> SDLmain.lib</li>
-    </ul>
-		<P>
-			Search for these using the Windows Find (Windows-F) utility, if you don't 
-			already know where they should be. For those of you with a clue, look inside 
-			the Debug or Release directories of the subdirectories of the Project folder. 
-			(It might be easier to just use Windows Find if this sounds confusing. And 
-			don't worry about needing a clue; we all need visits from the clue fairy 
-			frequently.)
-		</P>
-		<H3>
-			Creating a Project with SDL
-		</H3>
-		<P>
-			Create a project as a Win32 Application.
-		</P>
-		<P>
-			Create a C++ file for your project.
-		</P>
-		<P>
-			Set the C runtime to "Multi-threaded DLL" in the menu: <CODE>Project|Settings|C/C++ 
-				tab|Code Generation|Runtime Library </CODE>.
-		</P>
-		<P>
-			Add the SDL <CODE>include</CODE> directory to your list of includes in the 
-			menu: <CODE>Project|Settings|C/C++ tab|Preprocessor|Additional include directories </CODE>
-			.
-			<br>
-			<STRONG><FONT color="#009900">VC7 Specific: Instead of doing this I find it easier to 
-					add the include and library directories to the list that VC7 keeps. Do this by 
-					selecting Tools|Options|Projects|VC++ Directories and under the "Show 
-					Directories For:" dropbox select "Include Files", and click the "New Directory 
-					Icon" and add the [SDLROOT]\include directory (ex. If you installed to 
-					c:\SDL-1.2.5\ add c:\SDL-1.2.5\include).&nbsp;Proceed to&nbsp;change the 
-					dropbox selection to "Library Files" and add [SDLROOT]\lib.</FONT></STRONG>
-		</P>
-			<P>
-				The "include directory" I am referring to is the <CODE>include</CODE> folder 
-				within the main SDL directory (the one that this HTML file located within).
-			</P>
-			<P>
-				Now we're going to use the files that we had created earlier in the Build SDL 
-				step.
-			</P>
-			<P>
-				Copy the following files into your Project directory:
-			</P>
-			<ul>
-     <li> SDL.dll</li>
-     </ul>
-			<P>
-				Add the following files to your project (It is not necessary to copy them to 
-				your project directory):
-			</P>
-			<ul>
-     <li> SDL.lib </li>
-     <li> SDLmain.lib</li>
-     </ul>
-			<P>
-				(To add them to your project, right click on your project, and select "Add 
-				files to project")
-			</P>
-		<P><STRONG><FONT color="#009900">Instead of adding the files to your project it is more 
-					desireable to add them to the linker options: Project|Properties|Linker|Command 
-					Line and type the names of the libraries to link with in the "Additional 
-					Options:" box.&nbsp; Note: This must be done&nbsp;for&nbsp;each&nbsp;build 
-					configuration (eg. Release,Debug).</FONT></STRONG></P>
-		<H3>
-			SDL 101, First Day of Class
-		</H3>
-		<P>
-			Now create the basic body of your project. The body of your program should take 
-			the following form: <CODE>
-				<PRE>
-#include "SDL.h"
-
-int main( int argc, char* argv[] )
-{
-  // Body of the program goes here.
-  return 0;
-}
-</PRE>
-			</CODE>
-		<P></P>
-		<H3>
-			That's it!
-		</H3>
-		<P>
-			I hope that this document has helped you get through the most difficult part of 
-			using the SDL: installing it. Suggestions for improvements to this document 
-			should be sent to the writers of this document.
-		</P>
-		<P>
-			Thanks to Paulus Esterhazy (pesterhazy@gmx.net), for the work on VC++ port.
-		</P>
-		<P>
-			This document was originally called "VisualC.txt", and was written by <A HREF="mailto:slouken@libsdl.org">
-				Sam Lantinga</A>.
-		</P>
-		<P>
-			Later, it was converted to HTML and expanded into the document that you see 
-			today by <A HREF="mailto:snowlion@sprynet.com">Lion Kimbro</A>.
-		</P>
-		<P>Minor Fixes and Visual C++ 7 Information (In Green) was added by <A HREF="mailto:james@conceptofzero.net">James Turk</A>
-		</P>
-	</BODY>
-</HTML>