Bump version and soname for 5.0.3.

It is known that the BCJ filter --help text is only
partially translated.

COPYING.GPLv2

@@ -1,12 +1,12 @@
-                    GNU GENERAL PUBLIC LICENSE
-                       Version 2, June 1991
+		    GNU GENERAL PUBLIC LICENSE
+		       Version 2, June 1991
 
  Copyright (C) 1989, 1991 Free Software Foundation, Inc.,
  51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
  Everyone is permitted to copy and distribute verbatim copies
  of this license document, but changing it is not allowed.
 
-                            Preamble
+			    Preamble
 
   The licenses for most software are designed to take away your
 freedom to share and change it.  By contrast, the GNU General Public
@@ -56,7 +56,7 @@ patent must be licensed for everyone's free use or not licensed at all.
   The precise terms and conditions for copying, distribution and
 modification follow.
 
-                    GNU GENERAL PUBLIC LICENSE
+		    GNU GENERAL PUBLIC LICENSE
    TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
 
   0. This License applies to any program or other work which contains
@@ -255,7 +255,7 @@ make exceptions for this.  Our decision will be guided by the two goals
 of preserving the free status of all derivatives of our free software and
 of promoting the sharing and reuse of software generally.
 
-                            NO WARRANTY
+			    NO WARRANTY
 
   11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
 FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
@@ -277,9 +277,9 @@ YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
 PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
 POSSIBILITY OF SUCH DAMAGES.
 
-                     END OF TERMS AND CONDITIONS
+		     END OF TERMS AND CONDITIONS
 
-            How to Apply These Terms to Your New Programs
+	    How to Apply These Terms to Your New Programs
 
   If you develop a new program, and you want it to be of the greatest
 possible use to the public, the best way to achieve this is to make it

COPYING.LGPLv2.1

@@ -1,5 +1,5 @@
-                  GNU LESSER GENERAL PUBLIC LICENSE
-                       Version 2.1, February 1999
+		  GNU LESSER GENERAL PUBLIC LICENSE
+		       Version 2.1, February 1999
 
  Copyright (C) 1991, 1999 Free Software Foundation, Inc.
  51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
@@ -10,7 +10,7 @@
  as the successor of the GNU Library Public License, version 2, hence
  the version number 2.1.]
 
-                            Preamble
+			    Preamble
 
   The licenses for most software are designed to take away your
 freedom to share and change it.  By contrast, the GNU General Public
@@ -112,7 +112,7 @@ modification follow.  Pay close attention to the difference between a
 former contains code derived from the library, whereas the latter must
 be combined with the library in order to run.
 
-                  GNU LESSER GENERAL PUBLIC LICENSE
+		  GNU LESSER GENERAL PUBLIC LICENSE
    TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
 
   0. This License Agreement applies to any software library or other
@@ -146,7 +146,7 @@ such a program is covered only if its contents constitute a work based
 on the Library (independent of the use of the Library in a tool for
 writing it).  Whether that is true depends on what the Library does
 and what the program that uses the Library does.
-
+  
   1. You may copy and distribute verbatim copies of the Library's
 complete source code as you receive it, in any medium, provided that
 you conspicuously and appropriately publish on each copy an
@@ -432,7 +432,7 @@ decision will be guided by the two goals of preserving the free status
 of all derivatives of our free software and of promoting the sharing
 and reuse of software generally.
 
-                            NO WARRANTY
+			    NO WARRANTY
 
   15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO
 WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW.
@@ -455,7 +455,7 @@ FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF
 SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
 DAMAGES.
 
-                     END OF TERMS AND CONDITIONS
+		     END OF TERMS AND CONDITIONS
 
            How to Apply These Terms to Your New Libraries
 
@@ -500,3 +500,5 @@ necessary.  Here is a sample; alter the names:
   Ty Coon, President of Vice
 
 That's all there is to it!
+
+

INSTALL

@@ -9,9 +9,10 @@ XZ Utils Installation
             1.2.1. IRIX
             1.2.2. MINIX 3
             1.2.3. OpenVMS
-            1.2.4. Tru64
-            1.2.5. Windows
-            1.2.6. DOS
+            1.2.4. Solaris, OpenSolaris, and derivatives
+            1.2.5. Tru64
+            1.2.6. Windows
+            1.2.7. DOS
        1.3. Adding support for new platforms
     2. configure options
        2.1. Static vs. dynamic linking of liblzma
@@ -100,14 +101,24 @@ XZ Utils Installation
         http://nchrem.tnw.tudelft.nl/openvms/software2.html#xzutils
 
 
-1.2.4. Tru64
+1.2.4. Solaris, OpenSolaris, and derivatives
+
+    The following linker error has been reported on some x86 systems:
+
+        ld: fatal: relocation error: R_386_GOTOFF: ...
+
+    This can be worked around by passing gl_cv_cc_visibility=no
+    as an argument to the configure script.
+
+
+1.2.5. Tru64
 
     If you try to use the native C compiler on Tru64 (passing CC=cc to
     configure), you may need the workaround mention in section 4.1 in
     this file (pass also ac_cv_prog_cc_c99= to configure).
 
 
-1.2.5. Windows
+1.2.6. Windows
 
     Building XZ Utils on Windows is supported under MinGW + MSYS,
     MinGW-w64 + MSYS, and Cygwin. There is windows/build.bash to
@@ -127,7 +138,7 @@ XZ Utils Installation
     windows/README-Windows.txt for details.
 
 
-1.2.6. DOS
+1.2.7. DOS
 
     There is an experimental Makefile in the "dos" directory to build
     XZ Utils on DOS using DJGPP. Support for long file names (LFN) is

NEWS

@@ -2,11 +2,9 @@
 XZ Utils Release Notes
 ======================
 
-5.1.1alpha (2011-04-12)
+5.0.3 (2011-05-21)
 
-    * All fixes from 5.0.2
-
-    * liblzma fixes that will also be included in 5.0.3:
+    * liblzma fixes:
 
         - A memory leak was fixed.
 
@@ -30,19 +28,10 @@ XZ Utils Release Notes
         - The return values of the _memusage() functions are now
           documented better.
 
-    * Support for multithreaded compression was added using the simplest
-      method, which splits the input data into blocks and compresses
-      them independently. Other methods will be added in the future.
-      The current method has room for improvement, e.g. it is possible
-      to reduce the memory usage.
+    * Fix command name detection in xzgrep. xzegrep and xzfgrep now
+      correctly use egrep and fgrep instead of grep.
 
-    * Added the options --single-stream and --block-size=SIZE to xz.
-
-    * xzdiff and xzgrep now support .lzo files if lzop is installed.
-      The .tzo suffix is also recognized as a shorthand for .tar.lzo.
-
-    * Support for short 8.3 filenames under DOS was added to xz. It is
-      experimental and may change before it gets into a stable release.
+    * French translation was added.
 
 
 5.0.2 (2011-04-01)

THANKS

@@ -12,6 +12,7 @@ has been important. :-) In alphabetical order:
   - Emmanuel Blot
   - Martin Blumenstingl
   - Jakub Bogusz
+  - Maarten Bosmans
   - Trent W. Buck
   - David Burklund
   - Daniel Mealha Cabrita
@@ -37,6 +38,7 @@ has been important. :-) In alphabetical order:
   - Peter Lawler
   - Hin-Tak Leung
   - Andraž 'ruskie' Levstik
+  - Wim Lewis
   - Lorenzo De Liso
   - Gregory Margo
   - Jim Meyering
@@ -47,6 +49,7 @@ has been important. :-) In alphabetical order:
   - Andre Noll
   - Peter O'Gorman
   - Igor Pavlov
+  - Diego Elio Pettenò
   - Elbert Pol
   - Mikko Pouru
   - Robert Readman
@@ -59,10 +62,12 @@ has been important. :-) In alphabetical order:
   - Dan Shechter
   - Stuart Shelton
   - Jonathan Stott
+  - Dan Stromberg
   - Paul Townsend
   - Mohammed Adnène Trojette
   - Alexey Tourbin
   - Patrick J. Volkerding
+  - Martin Väth
   - Christian Weisgerber
   - Bert Wesarg
   - Ralf Wildenhues

TODO

@@ -39,10 +39,7 @@ Missing features
     xz doesn't support copying extended attributes, access control
     lists etc. from source to target file.
 
-    Multithreaded compression:
-      - Reduce memory usage of the current method.
-      - Implement threaded match finders.
-      - Implement pigz-style threading in LZMA2.
+    Multithreaded compression
 
     Multithreaded decompression
 
@@ -53,13 +50,6 @@ Missing features
     It will be a separate library that supports uncompressed, .gz,
     .bz2, .lzma, and .xz files.
 
-    Check the first 0x00 byte of LZMA data.
-
-    Support changing lzma_options_lzma.mode with lzma_filters_update().
-
-    Support LZMA_FULL_FLUSH for lzma_stream_decoder() to stop at
-    Block and Stream boundaries.
-
     lzma_strerror() to convert lzma_ret to human readable form?
     This is tricky, because the same error codes are used with
     slightly different meanings, and this cannot be fixed anymore.

configure.ac

@@ -229,7 +229,7 @@ fi
 
 m4_define([SUPPORTED_CHECKS], [crc32,crc64,sha256])
 
-m4_foreach([NAME], [SUPPORTED_FILTERS],
+m4_foreach([NAME], [SUPPORTED_CHECKS],
 [enable_check_[]NAME=no
 ])dnl
 
@@ -431,13 +431,11 @@ AC_USE_SYSTEM_EXTENSIONS
 if test "x$enable_threads" = xyes; then
 	echo
 	echo "Threading support:"
-	AX_PTHREAD
+	ACX_PTHREAD
 	LIBS="$LIBS $PTHREAD_LIBS"
 	AM_CFLAGS="$AM_CFLAGS $PTHREAD_CFLAGS"
 	CC="$PTHREAD_CC"
-	AC_SEARCH_LIBS([clock_gettime], [rt])
 fi
-AM_CONDITIONAL([COND_THREADS], [test "x$ax_pthread_ok" = xyes])
 
 echo
 echo "Initializing Libtool:"
@@ -519,9 +517,6 @@ gl_GETOPT
 # Find the best function to set timestamps.
 AC_CHECK_FUNCS([futimens futimes futimesat utimes utime], [break])
 
-# This is nice to have but not mandatory.
-AC_CHECK_FUNCS([posix_fadvise])
-
 TUKLIB_PROGNAME
 TUKLIB_INTEGER
 TUKLIB_PHYSMEM

dos/README

@@ -1,6 +1,6 @@
 
-Building XZ Utils for DOS
-=========================
+XZ Utils on DOS
+===============
 
 Introduction
 
@@ -77,3 +77,12 @@ Building
     are not built. Having e.g. xzdec.exe doesn't save much space compared
     to xz.exe, because the DJGPP runtime makes the .exe quite big anyway.
 
+
+Bugs
+
+    xz doesn't necessarily work in Dosbox. It should work in DOSEMU.
+
+    Pressing Ctrl-c or Ctrl-Break won't remove the incomplete target file
+    when running under Windows XP Command Prompt (something goes wrong
+    with SIGINT handling). It works correctly under Windows 95/98/98SE/ME.
+

dos/README.txt

@@ -1,123 +0,0 @@
-
-XZ Utils on DOS
-===============
-
-DOS-specific filename handling
-
-    xz detects at runtime if long filename (LFN) support is
-    available and will use it by default. It can be disabled by
-    setting an environment variable:
-
-        set lfn=n
-
-    When xz is in LFN mode, it behaves pretty much the same as it
-    does on other operating systems. Examples:
-
-        xz foo.tar          -> foo.tar.xz
-        xz -d foo.tar.xz    -> foo.tar
-
-        xz -F lzma foo.tar  -> foo.tar.lzma
-        xz -d foo.tar.lzma  -> foo.tar
-
-    When LFN support isn't available or it is disabled with LFN=n
-    environment setting, xz works in short filename (SFN) mode. This
-    affects filename suffix handling when compressing.
-
-    When compressing to the .xz format in SFN mode:
-
-      - Files without an extension get .xz just like on LFN systems.
-
-      - *.tar files become *.txz (shorthand for *.tar.xz). *.txz
-        is recognized by xz on all supported operating systems.
-        (Try to avoid confusing this with gzipped .txt files.)
-
-      - Files with 1-3 character extension have their extension modified
-        so that the last character is a dash ("-"). If the extension
-        is already three characters, the last character is lost. The
-        resulting *.?- or *.??- filename is recognized in LFN mode, but
-        it isn't recognized by xz on other operating systems.
-
-    Examples:
-
-        xz foo              -> foo.xz     |   xz -d foo.xz    -> foo
-        xz foo.tar          -> foo.txz    |   xz -d foo.txz   -> foo.tar
-        xz foo.c            -> foo.c-     |   xz -d foo.c-    -> foo.c
-        xz read.me          -> read.me-   |   xz -d read.me-  -> read.me
-        xz foo.txt          -> foo.tx-    |   xz -d foo.tx-   -> foo.tx   !
-
-    Note that in the last example above, the third character of the
-    filename extension is lost.
-
-    When compressing to the legacy .lzma format in SFN mode:
-
-      - *.tar files become *.tlz (shorthand for *.tar.lzma). *.tlz
-        is recognized by xz on all supported operating systems.
-
-      - Other files become *.lzm. The original filename extension
-        is lost. *.lzm is recognized also in LFN mode, but it is not
-        recognized by xz on other operating systems.
-
-    Examples:
-
-        xz -F lzma foo      -> foo.lzm    |   xz -d foo.lzm   -> foo
-        xz -F lzma foo.tar  -> foo.tlz    |   xz -d foo.tlz   -> foo.tar
-        xz -F lzma foo.c    -> foo.lzm    |   xz -d foo.lzm   -> foo      !
-        xz -F lzma read.me  -> read.lzm   |   xz -d read.lzm  -> read     !
-        xz -F lzma foo.txt  -> foo.lzm    |   xz -d foo.lzm   -> foo      !
-
-    When compressing with a custom suffix (-S .SUF, --suffix=.SUF) to
-    any file format:
-
-      - If the suffix begins with a dot, the filename extension is
-        replaced with the new suffix. The original extension is lost.
-
-      - If the suffix doesn't begin with a dot and the filename has no
-        extension and the filename given on the command line doesn't
-        have a dot at the end, the custom suffix is appended just like
-        on LFN systems.
-
-      - If the suffix doesn't begin with a dot and the filename has
-        an extension (or an extension-less filename is given with a dot
-        at the end), the last 1-3 characters of the filename extension
-        may get overwritten to fit the given custom suffix.
-
-    Examples:
-
-        xz -S x foo        -> foox      |  xz -dS x foox      -> foo
-        xz -S x foo.       -> foo.x     |  xz -dS x foo.x     -> foo
-        xz -S .x foo       -> foo.x     |  xz -dS .x foo.x    -> foo
-        xz -S .x foo.      -> foo.x     |  xz -dS .x foo.x    -> foo
-        xz -S x.y foo      -> foox.y    |  xz -dS x.y foox.y  -> foo
-        xz -S .a foo.c     -> foo.a     |  xz -dS .a foo.a    -> foo      !
-        xz -S a  foo.c     -> foo.ca    |  xz -dS a foo.ca    -> foo.c
-        xz -S ab foo.c     -> foo.cab   |  xz -dS ab foo.cab  -> foo.c
-        xz -S ab read.me   -> read.mab  |  xz -dS ab read.mab -> read.m   !
-        xz -S ab foo.txt   -> foo.tab   |  xz -dS ab foo.tab  -> foo.t    !
-        xz -S abc foo.txt  -> foo.abc   |  xz -dS abc foo.abc -> foo      !
-
-    When decompressing, the suffix handling in SFN mode is the same as
-    in LFN mode. The DOS-specific filenames *.lzm, *.?-, and *.??- are
-    recognized also in LFN mode.
-
-    xz handles certain uncommon situations safely:
-
-      - If the generated output filename refers to the same file as
-        the input file, xz detects this and refuses to compress or
-        decompress the input file even if --force is used. This can
-        happen when giving an overlong filename in SFN mode. E.g.
-        "xz -S x foo.texinfo" would try to write to foo.tex which on
-        SFN system is the same file as foo.texinfo.
-
-      - If the generated output filename is a special file like "con"
-        or "prn", xz detects this and refuses to compress or decompress
-        the input file even if --force is used.
-
-
-Bugs
-
-    xz doesn't necessarily work in Dosbox. It should work in DOSEMU.
-
-    Pressing Ctrl-c or Ctrl-Break won't remove the incomplete target file
-    when running under Windows XP Command Prompt (something goes wrong
-    with SIGINT handling). It works correctly under Windows 95/98/98SE/ME.
-

m4/acx_pthread.m4

@@ -1,88 +1,93 @@
-# ===========================================================================
-#        http://www.gnu.org/software/autoconf-archive/ax_pthread.html
-# ===========================================================================
+##### http://autoconf-archive.cryp.to/acx_pthread.html
 #
 # SYNOPSIS
 #
-#   AX_PTHREAD([ACTION-IF-FOUND[, ACTION-IF-NOT-FOUND]])
+#   ACX_PTHREAD([ACTION-IF-FOUND[, ACTION-IF-NOT-FOUND]])
 #
 # DESCRIPTION
 #
-#   This macro figures out how to build C programs using POSIX threads. It
-#   sets the PTHREAD_LIBS output variable to the threads library and linker
-#   flags, and the PTHREAD_CFLAGS output variable to any special C compiler
-#   flags that are needed. (The user can also force certain compiler
-#   flags/libs to be tested by setting these environment variables.)
+#   This macro figures out how to build C programs using POSIX threads.
+#   It sets the PTHREAD_LIBS output variable to the threads library and
+#   linker flags, and the PTHREAD_CFLAGS output variable to any special
+#   C compiler flags that are needed. (The user can also force certain
+#   compiler flags/libs to be tested by setting these environment
+#   variables.)
 #
 #   Also sets PTHREAD_CC to any special C compiler that is needed for
-#   multi-threaded programs (defaults to the value of CC otherwise). (This
-#   is necessary on AIX to use the special cc_r compiler alias.)
+#   multi-threaded programs (defaults to the value of CC otherwise).
+#   (This is necessary on AIX to use the special cc_r compiler alias.)
 #
-#   NOTE: You are assumed to not only compile your program with these flags,
-#   but also link it with them as well. e.g. you should link with
-#   $PTHREAD_CC $CFLAGS $PTHREAD_CFLAGS $LDFLAGS ... $PTHREAD_LIBS $LIBS
+#   NOTE: You are assumed to not only compile your program with these
+#   flags, but also link it with them as well. e.g. you should link
+#   with $PTHREAD_CC $CFLAGS $PTHREAD_CFLAGS $LDFLAGS ... $PTHREAD_LIBS
+#   $LIBS
 #
-#   If you are only building threads programs, you may wish to use these
-#   variables in your default LIBS, CFLAGS, and CC:
+#   If you are only building threads programs, you may wish to use
+#   these variables in your default LIBS, CFLAGS, and CC:
 #
-#     LIBS="$PTHREAD_LIBS $LIBS"
-#     CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
-#     CC="$PTHREAD_CC"
+#          LIBS="$PTHREAD_LIBS $LIBS"
+#          CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
+#          CC="$PTHREAD_CC"
 #
-#   In addition, if the PTHREAD_CREATE_JOINABLE thread-attribute constant
-#   has a nonstandard name, defines PTHREAD_CREATE_JOINABLE to that name
-#   (e.g. PTHREAD_CREATE_UNDETACHED on AIX).
+#   In addition, if the PTHREAD_CREATE_JOINABLE thread-attribute
+#   constant has a nonstandard name, defines PTHREAD_CREATE_JOINABLE to
+#   that name (e.g. PTHREAD_CREATE_UNDETACHED on AIX).
 #
-#   ACTION-IF-FOUND is a list of shell commands to run if a threads library
-#   is found, and ACTION-IF-NOT-FOUND is a list of commands to run it if it
-#   is not found. If ACTION-IF-FOUND is not specified, the default action
-#   will define HAVE_PTHREAD.
+#   ACTION-IF-FOUND is a list of shell commands to run if a threads
+#   library is found, and ACTION-IF-NOT-FOUND is a list of commands to
+#   run it if it is not found. If ACTION-IF-FOUND is not specified, the
+#   default action will define HAVE_PTHREAD.
 #
-#   Please let the authors know if this macro fails on any platform, or if
-#   you have any other suggestions or comments. This macro was based on work
-#   by SGJ on autoconf scripts for FFTW (http://www.fftw.org/) (with help
-#   from M. Frigo), as well as ac_pthread and hb_pthread macros posted by
-#   Alejandro Forero Cuervo to the autoconf macro repository. We are also
-#   grateful for the helpful feedback of numerous users.
+#   Please let the authors know if this macro fails on any platform, or
+#   if you have any other suggestions or comments. This macro was based
+#   on work by SGJ on autoconf scripts for FFTW (http://www.fftw.org/)
+#   (with help from M. Frigo), as well as ac_pthread and hb_pthread
+#   macros posted by Alejandro Forero Cuervo to the autoconf macro
+#   repository. We are also grateful for the helpful feedback of
+#   numerous users.
 #
-# LICENSE
+# LAST MODIFICATION
 #
-#   Copyright (c) 2008 Steven G. Johnson <stevenj@alum.mit.edu>
+#   2007-07-29
 #
-#   This program is free software: you can redistribute it and/or modify it
-#   under the terms of the GNU General Public License as published by the
-#   Free Software Foundation, either version 3 of the License, or (at your
-#   option) any later version.
+# COPYLEFT
+#
+#   Copyright (c) 2007 Steven G. Johnson <stevenj@alum.mit.edu>
+#
+#   This program is free software: you can redistribute it and/or
+#   modify it under the terms of the GNU General Public License as
+#   published by the Free Software Foundation, either version 3 of the
+#   License, or (at your option) any later version.
 #
 #   This program is distributed in the hope that it will be useful, but
 #   WITHOUT ANY WARRANTY; without even the implied warranty of
-#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
-#   Public License for more details.
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+#   General Public License for more details.
 #
-#   You should have received a copy of the GNU General Public License along
-#   with this program. If not, see <http://www.gnu.org/licenses/>.
+#   You should have received a copy of the GNU General Public License
+#   along with this program. If not, see
+#   <http://www.gnu.org/licenses/>.
 #
-#   As a special exception, the respective Autoconf Macro's copyright owner
-#   gives unlimited permission to copy, distribute and modify the configure
-#   scripts that are the output of Autoconf when processing the Macro. You
-#   need not follow the terms of the GNU General Public License when using
-#   or distributing such scripts, even though portions of the text of the
-#   Macro appear in them. The GNU General Public License (GPL) does govern
-#   all other use of the material that constitutes the Autoconf Macro.
+#   As a special exception, the respective Autoconf Macro's copyright
+#   owner gives unlimited permission to copy, distribute and modify the
+#   configure scripts that are the output of Autoconf when processing
+#   the Macro. You need not follow the terms of the GNU General Public
+#   License when using or distributing such scripts, even though
+#   portions of the text of the Macro appear in them. The GNU General
+#   Public License (GPL) does govern all other use of the material that
+#   constitutes the Autoconf Macro.
 #
-#   This special exception to the GPL applies to versions of the Autoconf
-#   Macro released by the Autoconf Archive. When you make and distribute a
-#   modified version of the Autoconf Macro, you may extend this special
-#   exception to the GPL to apply to your modified version as well.
+#   This special exception to the GPL applies to versions of the
+#   Autoconf Macro released by the Autoconf Macro Archive. When you
+#   make and distribute a modified version of the Autoconf Macro, you
+#   may extend this special exception to the GPL to apply to your
+#   modified version as well.
 
-#serial 11
-
-AU_ALIAS([ACX_PTHREAD], [AX_PTHREAD])
-AC_DEFUN([AX_PTHREAD], [
+AC_DEFUN([ACX_PTHREAD], [
 AC_REQUIRE([AC_CANONICAL_HOST])
 AC_LANG_SAVE
 AC_LANG_C
-ax_pthread_ok=no
+acx_pthread_ok=no
 
 # We used to check for pthread.h first, but this fails if pthread.h
 # requires special compiler flags (e.g. on True64 or Sequent).
@@ -97,9 +102,9 @@ if test x"$PTHREAD_LIBS$PTHREAD_CFLAGS" != x; then
         save_LIBS="$LIBS"
         LIBS="$PTHREAD_LIBS $LIBS"
         AC_MSG_CHECKING([for pthread_join in LIBS=$PTHREAD_LIBS with CFLAGS=$PTHREAD_CFLAGS])
-        AC_TRY_LINK_FUNC(pthread_join, ax_pthread_ok=yes)
-        AC_MSG_RESULT($ax_pthread_ok)
-        if test x"$ax_pthread_ok" = xno; then
+        AC_TRY_LINK_FUNC(pthread_join, acx_pthread_ok=yes)
+        AC_MSG_RESULT($acx_pthread_ok)
+        if test x"$acx_pthread_ok" = xno; then
                 PTHREAD_LIBS=""
                 PTHREAD_CFLAGS=""
         fi
@@ -117,7 +122,7 @@ fi
 # which indicates that we try without any flags at all, and "pthread-config"
 # which is a program returning the flags for the Pth emulation library.
 
-ax_pthread_flags="pthreads none -Kthread -kthread lthread -pthread -pthreads -mthreads pthread --thread-safe -mt pthread-config"
+acx_pthread_flags="pthreads none -Kthread -kthread lthread -pthread -pthreads -mthreads pthread --thread-safe -mt pthread-config"
 
 # The ordering *is* (sometimes) important.  Some notes on the
 # individual items follow:
@@ -150,16 +155,12 @@ case "${host_cpu}-${host_os}" in
         # who knows whether they'll stub that too in a future libc.)  So,
         # we'll just look for -pthreads and -lpthread first:
 
-        ax_pthread_flags="-pthreads pthread -mt -pthread $ax_pthread_flags"
+        acx_pthread_flags="-pthreads pthread -mt -pthread $acx_pthread_flags"
         ;;
-
-	*-darwin*)
-	ax_pthread_flags="-pthread $ax_pthread_flags"
-	;;
 esac
 
-if test x"$ax_pthread_ok" = xno; then
-for flag in $ax_pthread_flags; do
+if test x"$acx_pthread_ok" = xno; then
+for flag in $acx_pthread_flags; do
 
         case $flag in
                 none)
@@ -172,8 +173,8 @@ for flag in $ax_pthread_flags; do
                 ;;
 
 		pthread-config)
-		AC_CHECK_PROG(ax_pthread_config, pthread-config, yes, no)
-		if test x"$ax_pthread_config" = xno; then continue; fi
+		AC_CHECK_PROG(acx_pthread_config, pthread-config, yes, no)
+		if test x"$acx_pthread_config" = xno; then continue; fi
 		PTHREAD_CFLAGS="`pthread-config --cflags`"
 		PTHREAD_LIBS="`pthread-config --ldflags` `pthread-config --libs`"
 		;;
@@ -198,22 +199,17 @@ for flag in $ax_pthread_flags; do
         # pthread_cleanup_push because it is one of the few pthread
         # functions on Solaris that doesn't have a non-functional libc stub.
         # We try pthread_create on general principles.
-        AC_TRY_LINK([#include <pthread.h>
-		     static void routine(void* a) {a=0;}
-		     static void* start_routine(void* a) {return a;}],
-                    [pthread_t th; pthread_attr_t attr;
-                     pthread_create(&th,0,start_routine,0);
-                     pthread_join(th, 0);
-                     pthread_attr_init(&attr);
-                     pthread_cleanup_push(routine, 0);
-                     pthread_cleanup_pop(0); ],
-                    [ax_pthread_ok=yes])
+        AC_TRY_LINK([#include <pthread.h>],
+                    [pthread_t th; pthread_join(th, 0);
+                     pthread_attr_init(0); pthread_cleanup_push(0, 0);
+                     pthread_create(0,0,0,0); pthread_cleanup_pop(0); ],
+                    [acx_pthread_ok=yes])
 
         LIBS="$save_LIBS"
         CFLAGS="$save_CFLAGS"
 
-        AC_MSG_RESULT($ax_pthread_ok)
-        if test "x$ax_pthread_ok" = xyes; then
+        AC_MSG_RESULT($acx_pthread_ok)
+        if test "x$acx_pthread_ok" = xyes; then
                 break;
         fi
 
@@ -223,7 +219,7 @@ done
 fi
 
 # Various other checks:
-if test "x$ax_pthread_ok" = xyes; then
+if test "x$acx_pthread_ok" = xyes; then
         save_LIBS="$LIBS"
         LIBS="$PTHREAD_LIBS $LIBS"
         save_CFLAGS="$CFLAGS"
@@ -272,12 +268,12 @@ AC_SUBST(PTHREAD_CFLAGS)
 AC_SUBST(PTHREAD_CC)
 
 # Finally, execute ACTION-IF-FOUND/ACTION-IF-NOT-FOUND:
-if test x"$ax_pthread_ok" = xyes; then
+if test x"$acx_pthread_ok" = xyes; then
         ifelse([$1],,AC_DEFINE(HAVE_PTHREAD,1,[Define if you have POSIX threads libraries and header files.]),[$1])
         :
 else
-        ax_pthread_ok=no
+        acx_pthread_ok=no
         $2
 fi
 AC_LANG_RESTORE
-])dnl AX_PTHREAD
+])dnl ACX_PTHREAD

macosx/build.sh

@@ -1,92 +0,0 @@
-#!/bin/sh
-
-###############################################################################
-# Author: Anders F Björklund <afb@users.sourceforge.net>
-#
-# This file has been put into the public domain.
-# You can do whatever you want with this file.
-###############################################################################
-
-mkdir -p Root
-mkdir -p Resources
-
-# Abort immediately if something goes wrong.
-set -e
-
-# Clean up if it was already configured.
-[ -f Makefile ] && make distclean
-
-# Build the regular fat program
-
-CC="gcc-4.0" \
-CFLAGS="-O2 -g -arch ppc -arch ppc64 -arch i386 -arch x86_64 -isysroot /Developer/SDKs/MacOSX10.4u.sdk -mmacosx-version-min=10.4" \
-../configure --disable-dependency-tracking --disable-xzdec --disable-lzmadec i686-apple-darwin8
-
-make
-
-make check
-
-make DESTDIR=`pwd`/Root install
-
-make distclean
-
-# Build the size-optimized program
-
-CC="gcc-4.0" \
-CFLAGS="-Os -g -arch ppc -arch i386 -isysroot /Developer/SDKs/MacOSX10.4u.sdk -mmacosx-version-min=10.4" \
-../configure --disable-dependency-tracking --disable-shared --disable-nls --disable-encoders --enable-small --disable-threads i686-apple-darwin8
-
-make -C src/liblzma
-make -C src/xzdec
-make -C src/xzdec DESTDIR=`pwd`/Root install
-
-cp -a ../extra Root/usr/local/share/doc/xz
-
-make distclean
-
-# Strip debugging symbols and make relocatable
-
-for bin in xz lzmainfo xzdec lzmadec; do
-    strip -S Root/usr/local/bin/$bin
-    install_name_tool -change /usr/local/lib/liblzma.5.dylib @executable_path/../lib/liblzma.5.dylib Root/usr/local/bin/$bin
-done
-
-for lib in liblzma.5.dylib; do
-    strip -S Root/usr/local/lib/$lib
-    install_name_tool -id @executable_path/../lib/liblzma.5.dylib Root/usr/local/lib/$lib
-done
-
-strip -S  Root/usr/local/lib/liblzma.a
-rm -f Root/usr/local/lib/liblzma.la
-
-# Include pkg-config while making relocatable
-
-sed -e 's|prefix=/usr/local|prefix=${pcfiledir}/../..|' < Root/usr/local/lib/pkgconfig/liblzma.pc > Root/liblzma.pc
-mv Root/liblzma.pc Root/usr/local/lib/pkgconfig/liblzma.pc
-
-# Create tarball, but without the HFS+ attrib
-
-rmdir debug lib po src/liblzma/api src/liblzma src/lzmainfo src/scripts src/xz src/xzdec src tests
-
-( cd Root/usr/local; COPY_EXTENDED_ATTRIBUTES_DISABLE=true COPYFILE_DISABLE=true tar cvjf ../../../XZ.tbz * )
-
-# Include documentation files for package
-
-cp -p ../README Resources/ReadMe.txt
-cp -p ../COPYING Resources/License.txt
-
-# Make an Installer.app package
-
-ID="org.tukaani.xz"
-VERSION=`cd ..; sh build-aux/version.sh`
-PACKAGEMAKER=/Developer/Applications/Utilities/PackageMaker.app/Contents/MacOS/PackageMaker
-$PACKAGEMAKER -r Root/usr/local -l /usr/local -e Resources -i $ID -n $VERSION -t XZ -o XZ.pkg -g 10.4 --verbose
-
-# Put the package in a disk image
-
-hdiutil create -fs HFS+ -format UDZO -quiet -srcfolder XZ.pkg -ov XZ.dmg
-hdiutil internet-enable -yes -quiet XZ.dmg
-
-echo
-echo "Build completed successfully."
-echo

po/LINGUAS

@@ -1,4 +1,5 @@
 cs
 de
+fr
 it
 pl

po/fr.po

@@ -0,0 +1,864 @@
+# XZ Utils French Translation
+# This file is put in the public domain.
+# Adrien Nader <camaradetux@gmail.com>, 2011.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: xz-utils\n"
+"Report-Msgid-Bugs-To: lasse.collin@tukaani.org\n"
+"POT-Creation-Date: 2011-05-21 14:35+0200\n"
+"PO-Revision-Date: 2010-09-24 21;12+0200\n"
+"Last-Translator: Adrien Nader <camaradetux@gmail.com>\n"
+"Language-Team: None\n"
+"Language: fr\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Plural-Forms: nplurals=2; plural=(n==1) ? 0 : 1;\n"
+
+#: src/xz/args.c:338
+#, c-format
+msgid "%s: Unknown file format type"
+msgstr "%s : Format de fichier inconnu"
+
+#: src/xz/args.c:361 src/xz/args.c:369
+#, c-format
+msgid "%s: Unsupported integrity check type"
+msgstr "%s : Type de vérification d'intégrité inconnu"
+
+#: src/xz/args.c:396
+msgid "Only one file can be specified with `--files' or `--files0'."
+msgstr "Un seul fichier peut être spécifié avec `--files' ou `--files0'."
+
+#: src/xz/args.c:459
+#, c-format
+msgid "The environment variable %s contains too many arguments"
+msgstr "La variable d'environnement %s contient trop d'arguments"
+
+#: src/xz/coder.c:105
+msgid "Maximum number of filters is four"
+msgstr "Le nombre maximal de filtres est quatre"
+
+#: src/xz/coder.c:118
+msgid "Memory usage limit is too low for the given filter setup."
+msgstr "La limite d'utilisation mémoire est trop basse pour la configuration de filtres donnée."
+
+#: src/xz/coder.c:148
+msgid "Using a preset in raw mode is discouraged."
+msgstr "Utiliser un préréglage en mode `raw' est déconseillé."
+
+#: src/xz/coder.c:150
+msgid "The exact options of the presets may vary between software versions."
+msgstr "Le détail des préréglages peut varier entre différentes versions du logiciel."
+
+#: src/xz/coder.c:176
+msgid "The .lzma format supports only the LZMA1 filter"
+msgstr "Le format .lzma ne prend en charge que le filtre LZMA1"
+
+#: src/xz/coder.c:184
+msgid "LZMA1 cannot be used with the .xz format"
+msgstr "Le filtre LZMA1 ne peut être utilisé avec le format .xz"
+
+#: src/xz/coder.c:203
+#, c-format
+msgid "Using up to %<PRIu32> threads."
+msgstr "Jusqu'à %<PRIu32> threads seront utilisés."
+
+#: src/xz/coder.c:216
+msgid "Unsupported filter chain or filter options"
+msgstr "Enchaînement ou options de filtres non pris en charge"
+
+#: src/xz/coder.c:224
+#, c-format
+msgid "Decompression will need %s MiB of memory."
+msgstr "La décompression nécessitera %s MiB de mémoire."
+
+#: src/xz/coder.c:259
+#, c-format
+msgid "Adjusted the number of threads from %s to %s to not exceed the memory usage limit of %s MiB"
+msgstr "Nombre de threads réduit de %s à %s pour ne pas dépasser la limite d'utilisation mémoire de %s MiB"
+
+#: src/xz/coder.c:313
+#, c-format
+msgid "Adjusted LZMA%c dictionary size from %s MiB to %s MiB to not exceed the memory usage limit of %s MiB"
+msgstr "Taille du dictionnaire LZMA%c réduite de %s MiB à %s MiB pour ne pas dépasser la limite d'utilisation mémoire de %s MiB"
+
+#. TRANSLATORS: When compression or decompression finishes,
+#. and xz is going to remove the source file, xz first checks
+#. if the source file still exists, and if it does, does its
+#. device and inode numbers match what xz saw when it opened
+#. the source file. If these checks fail, this message is
+#. shown, %s being the filename, and the file is not deleted.
+#. The check for device and inode numbers is there, because
+#. it is possible that the user has put a new file in place
+#. of the original file, and in that case it obviously
+#. shouldn't be removed.
+#: src/xz/file_io.c:136
+#, c-format
+msgid "%s: File seems to have been moved, not removing"
+msgstr "%s : Le fichier a apparemment été déplacé, suppression annulée"
+
+#: src/xz/file_io.c:143 src/xz/file_io.c:635
+#, c-format
+msgid "%s: Cannot remove: %s"
+msgstr "%s : Impossible de supprimer : %s"
+
+#: src/xz/file_io.c:168
+#, c-format
+msgid "%s: Cannot set the file owner: %s"
+msgstr "%s : Impossible de modifier le propriétaire du fichier : %s"
+
+#: src/xz/file_io.c:174
+#, c-format
+msgid "%s: Cannot set the file group: %s"
+msgstr "%s : Impossible de modifier le groupe propriétaire du fichier : %s"
+
+#: src/xz/file_io.c:193
+#, c-format
+msgid "%s: Cannot set the file permissions: %s"
+msgstr "%s : Impossible de modifier les permissions du fichier : %s"
+
+#: src/xz/file_io.c:340 src/xz/file_io.c:423
+#, c-format
+msgid "%s: Is a symbolic link, skipping"
+msgstr "%s est un lien symbolique : ignoré"
+
+#: src/xz/file_io.c:468
+#, c-format
+msgid "%s: Is a directory, skipping"
+msgstr "%s est un répertoire : ignoré"
+
+#: src/xz/file_io.c:474
+#, c-format
+msgid "%s: Not a regular file, skipping"
+msgstr "%s n'est pas un fichier régulier : ignoré"
+
+#: src/xz/file_io.c:491
+#, c-format
+msgid "%s: File has setuid or setgid bit set, skipping"
+msgstr "%s : Le fichier possède les bits `setuid' ou `setgid' : ignoré"
+
+#: src/xz/file_io.c:498
+#, c-format
+msgid "%s: File has sticky bit set, skipping"
+msgstr "%s : Le fichier possède le bit `sticky' : ignoré"
+
+#: src/xz/file_io.c:505
+#, c-format
+msgid "%s: Input file has more than one hard link, skipping"
+msgstr "%s : Le fichier d'entrée a plus d'un lien matériel : ignoré"
+
+#: src/xz/file_io.c:761
+#, c-format
+msgid "Error restoring the O_APPEND flag to standard output: %s"
+msgstr "Impossible de rétablir le drapeau O_APPEND sur la sortie standard : %s"
+
+#: src/xz/file_io.c:773
+#, c-format
+msgid "%s: Closing the file failed: %s"
+msgstr "%s : Impossible de fermer le fichier : %s"
+
+#: src/xz/file_io.c:809 src/xz/file_io.c:1008
+#, c-format
+msgid "%s: Seeking failed when trying to create a sparse file: %s"
+msgstr "%s : Impossible de se déplacer dans le fichier pour créer un 'sparse file' : %s"
+
+#: src/xz/file_io.c:883
+#, c-format
+msgid "%s: Read error: %s"
+msgstr "%s : Erreur d'écriture : %s"
+
+#: src/xz/file_io.c:906
+#, c-format
+msgid "%s: Error seeking the file: %s"
+msgstr "%s : Impossible de se déplacer dans le fichier : %s"
+
+#: src/xz/file_io.c:916
+#, c-format
+msgid "%s: Unexpected end of file"
+msgstr "%s : Fin de fichier inattendue"
+
+#: src/xz/file_io.c:966
+#, c-format
+msgid "%s: Write error: %s"
+msgstr "%s : Erreur d'écriture : %s"
+
+#: src/xz/hardware.c:101
+msgid "Disabled"
+msgstr "Désactivé"
+
+#. TRANSLATORS: Test with "xz --info-memory" to see if
+#. the alignment looks nice.
+#: src/xz/hardware.c:120
+msgid "Total amount of physical memory (RAM): "
+msgstr "Quantité totale de mémoire physique (RAM) :  "
+
+#: src/xz/hardware.c:122
+msgid "Memory usage limit for compression:    "
+msgstr "Limite d'utilisation pour la compression :   "
+
+#: src/xz/hardware.c:124
+msgid "Memory usage limit for decompression:  "
+msgstr "Limite d'utilisation pour la décompression : "
+
+#. TRANSLATORS: Indicates that there is no integrity check.
+#. This string is used in tables, so the width must not
+#. exceed ten columns with a fixed-width font.
+#: src/xz/list.c:62
+msgid "None"
+msgstr "Aucune"
+
+#. TRANSLATORS: Indicates that integrity check name is not known,
+#. but the Check ID is known (here 2). This and other "Unknown-N"
+#. strings are used in tables, so the width must not exceed ten
+#. columns with a fixed-width font. It's OK to omit the dash if
+#. you need space for one extra letter, but don't use spaces.
+#: src/xz/list.c:69
+msgid "Unknown-2"
+msgstr "Inconnue-2"
+
+#: src/xz/list.c:70
+msgid "Unknown-3"
+msgstr "Inconnue-3"
+
+#: src/xz/list.c:72
+msgid "Unknown-5"
+msgstr "Inconnue-5"
+
+#: src/xz/list.c:73
+msgid "Unknown-6"
+msgstr "Inconnue-6"
+
+#: src/xz/list.c:74
+msgid "Unknown-7"
+msgstr "Inconnue-7"
+
+#: src/xz/list.c:75
+msgid "Unknown-8"
+msgstr "Inconnue-8"
+
+#: src/xz/list.c:76
+msgid "Unknown-9"
+msgstr "Inconnue-9"
+
+#: src/xz/list.c:78
+msgid "Unknown-11"
+msgstr "Inconnue-11"
+
+#: src/xz/list.c:79
+msgid "Unknown-12"
+msgstr "Inconnue-12"
+
+#: src/xz/list.c:80
+msgid "Unknown-13"
+msgstr "Inconnue-13"
+
+#: src/xz/list.c:81
+msgid "Unknown-14"
+msgstr "Inconnue-14"
+
+#: src/xz/list.c:82
+msgid "Unknown-15"
+msgstr "Inconnue-15"
+
+#: src/xz/list.c:126
+#, c-format
+msgid "%s: File is empty"
+msgstr "%s : Le fichier est vide"
+
+#: src/xz/list.c:131
+#, c-format
+msgid "%s: Too small to be a valid .xz file"
+msgstr "%s : Trop petit pour être un fichier xz valide."
+
+#. TRANSLATORS: These are column headings. From Strms (Streams)
+#. to Ratio, the columns are right aligned. Check and Filename
+#. are left aligned. If you need longer words, it's OK to
+#. use two lines here. Test with "xz -l foo.xz".
+#: src/xz/list.c:612
+msgid "Strms  Blocks   Compressed Uncompressed  Ratio  Check   Filename"
+msgstr "Flux    Blocs    Compressé  Décompressé  Ratio  Vérif   Nom de fichier"
+
+#: src/xz/list.c:652
+#, c-format
+msgid "  Streams:            %s\n"
+msgstr "  Flux :                            %s\n"
+
+#: src/xz/list.c:654
+#, c-format
+msgid "  Blocks:             %s\n"
+msgstr "  Blocs :                           %s\n"
+
+#: src/xz/list.c:656
+#, c-format
+msgid "  Compressed size:    %s\n"
+msgstr "  Taille compressé :                %s\n"
+
+#: src/xz/list.c:659
+#, c-format
+msgid "  Uncompressed size:  %s\n"
+msgstr "  Taille décompressé :              %s\n"
+
+#: src/xz/list.c:662
+#, c-format
+msgid "  Ratio:              %s\n"
+msgstr "  Ratio :                           %s\n"
+
+#: src/xz/list.c:664
+#, c-format
+msgid "  Check:              %s\n"
+msgstr "  Vérification :                    %s\n"
+
+#: src/xz/list.c:665
+#, c-format
+msgid "  Stream padding:     %s\n"
+msgstr "  Octets de rembourrage du flux :   %s\n"
+
+#. TRANSLATORS: The second line is column headings. All except
+#. Check are right aligned; Check is left aligned. Test with
+#. "xz -lv foo.xz".
+#: src/xz/list.c:693
+msgid ""
+"  Streams:\n"
+"    Stream    Blocks      CompOffset    UncompOffset        CompSize      UncompSize  Ratio  Check      Padding"
+msgstr ""
+"  Flux :\n"
+"      Flux     Blocs    PositionComp  PositionDécomp      TailleComp    TailleDécomp  Ratio  Vérif.    Bourrage"
+
+#. TRANSLATORS: The second line is column headings. All
+#. except Check are right aligned; Check is left aligned.
+#: src/xz/list.c:748
+#, c-format
+msgid ""
+"  Blocks:\n"
+"    Stream     Block      CompOffset    UncompOffset       TotalSize      UncompSize  Ratio  Check"
+msgstr ""
+"  Blocs :\n"
+"      Flux      Bloc    PositionComp  PositionDécomp       TailleTot    TailleDécomp  Ratio  Vérif."
+
+#. TRANSLATORS: These are additional column headings
+#. for the most verbose listing mode. CheckVal
+#. (Check value), Flags, and Filters are left aligned.
+#. Header (Block Header Size), CompSize, and MemUsage
+#. are right aligned. %*s is replaced with 0-120
+#. spaces to make the CheckVal column wide enough.
+#. Test with "xz -lvv foo.xz".
+#: src/xz/list.c:760
+#, c-format
+msgid "      CheckVal %*s Header  Flags        CompSize    MemUsage  Filters"
+msgstr "     ValVérif %*sEn-tête  Drapeaux   TailleComp     UtilMém  Filtres"
+
+#: src/xz/list.c:838 src/xz/list.c:1007
+#, c-format
+msgid "  Memory needed:      %s MiB\n"
+msgstr "  Mémoire nécessaire :              %s MiB\n"
+
+#: src/xz/list.c:840 src/xz/list.c:1009
+#, c-format
+msgid "  Sizes in headers:   %s\n"
+msgstr "  Tailles stockées dans l'en-tête : %s\n"
+
+#: src/xz/list.c:841 src/xz/list.c:1010
+msgid "Yes"
+msgstr "Oui"
+
+#: src/xz/list.c:841 src/xz/list.c:1010
+msgid "No"
+msgstr "Non"
+
+#. TRANSLATORS: %s is an integer. Only the plural form of this
+#. message is used (e.g. "2 files"). Test with "xz -l foo.xz bar.xz".
+#: src/xz/list.c:986
+#, c-format
+msgid "%s file\n"
+msgid_plural "%s files\n"
+msgstr[0] "%s fichier\n"
+msgstr[1] "%s fichiers\n"
+
+#: src/xz/list.c:999
+msgid "Totals:"
+msgstr "Totaux :"
+
+#: src/xz/list.c:1000
+#, c-format
+msgid "  Number of files:    %s\n"
+msgstr "  Nombre de fichiers : %s\n"
+
+#: src/xz/list.c:1072
+msgid "--list works only on .xz files (--format=xz or --format=auto)"
+msgstr "--list ne marche que sur les fichiers .xz (--format=xz ou --format=auto)"
+
+#: src/xz/list.c:1078
+msgid "--list does not support reading from standard input"
+msgstr "--list est incompatible avec la lecture sur l'entrée standard"
+
+#: src/xz/main.c:89
+#, c-format
+msgid "%s: Error reading filenames: %s"
+msgstr "%s : Erreur lors de la lecture des noms de fichiers : %s"
+
+#: src/xz/main.c:96
+#, c-format
+msgid "%s: Unexpected end of input when reading filenames"
+msgstr "%s : Fin des données inattendue lors de la lecture des noms de fichiers"
+
+#: src/xz/main.c:120
+#, c-format
+msgid "%s: Null character found when reading filenames; maybe you meant to use `--files0' instead of `--files'?"
+msgstr "%s : Caractère NULL détecté lors de la lecture des noms de fichiers ; peut-être pensiez-vous à `--files0' plutot qu'a `--files' ?"
+
+#: src/xz/main.c:174
+msgid "Compression and decompression with --robot are not supported yet."
+msgstr "La compression et la décompression ne marchent pas encore avec --robot."
+
+#: src/xz/main.c:231
+msgid "Cannot read data from standard input when reading filenames from standard input"
+msgstr "Impossible de lire à la fois les données et les noms de fichiers depuis l'entrée standard"
+
+#. TRANSLATORS: This is the program name in the beginning
+#. of the line in messages. Usually it becomes "xz: ".
+#. This is a translatable string because French needs
+#. a space before a colon.
+#: src/xz/message.c:733
+#, c-format
+msgid "%s: "
+msgstr "%s : "
+
+#: src/xz/message.c:796 src/xz/message.c:846
+msgid "Internal error (bug)"
+msgstr "Erreur interne (bug)"
+
+#: src/xz/message.c:803
+msgid "Cannot establish signal handlers"
+msgstr "Impossible d'installer le gestionnaire de signaux"
+
+#: src/xz/message.c:812
+msgid "No integrity check; not verifying file integrity"
+msgstr "Pas de données de vérification d'intégrité ; vérification non effectuée"
+
+#: src/xz/message.c:815
+msgid "Unsupported type of integrity check; not verifying file integrity"
+msgstr "Méthode de vérification d'intégrité non prise en charge ; vérification non effectuée"
+
+#: src/xz/message.c:822
+msgid "Memory usage limit reached"
+msgstr "Limite d'utilisation mémoire atteinte"
+
+#: src/xz/message.c:825
+msgid "File format not recognized"
+msgstr "Format de fichier inconnu"
+
+#: src/xz/message.c:828
+msgid "Unsupported options"
+msgstr "Options non prises en charge"
+
+#: src/xz/message.c:831
+msgid "Compressed data is corrupt"
+msgstr "Les données compressées sont corrompues"
+
+#: src/xz/message.c:834
+msgid "Unexpected end of input"
+msgstr "Fin des données inattendue "
+
+#: src/xz/message.c:885
+#, c-format
+msgid "%s MiB of memory is required. The limit is %s."
+msgstr "%s MiB de mémoire sont nécessaires, la limite étant %s."
+
+#: src/xz/message.c:1052
+#, c-format
+msgid "%s: Filter chain: %s\n"
+msgstr "%s : Enchaînement de filtres : %s\n"
+
+#: src/xz/message.c:1062
+#, c-format
+msgid "Try `%s --help' for more information."
+msgstr "Utilisez `%s --help' pour plus d'informations."
+
+#: src/xz/message.c:1088
+#, c-format
+msgid ""
+"Usage: %s [OPTION]... [FILE]...\n"
+"Compress or decompress FILEs in the .xz format.\n"
+"\n"
+msgstr ""
+"Utilisation : %s [OPTION]... [FICHIER]...\n"
+"Compresse ou decompresse FICHIER(s) au format .xz.\n"
+"\n"
+
+#: src/xz/message.c:1095
+msgid "Mandatory arguments to long options are mandatory for short options too.\n"
+msgstr ""
+"Les arguments obligatoires pour les options longues le sont aussi pour les\n"
+"options courtes.\n"
+
+#: src/xz/message.c:1099
+msgid " Operation mode:\n"
+msgstr " Mode d'opération :\n"
+
+#: src/xz/message.c:1102
+msgid ""
+"  -z, --compress      force compression\n"
+"  -d, --decompress    force decompression\n"
+"  -t, --test          test compressed file integrity\n"
+"  -l, --list          list information about .xz files"
+msgstr ""
+"  -z, --compress      forcer la compression\n"
+"  -d, --decompress    forcer la décompression\n"
+"  -t, --test          tester l'intégrité du fichier compressé\n"
+"  -l, --list          lister les informations à propos des fichiers .xz"
+
+#: src/xz/message.c:1108
+msgid ""
+"\n"
+" Operation modifiers:\n"
+msgstr ""
+"\n"
+" Modifictauers :\n"
+
+#: src/xz/message.c:1111
+msgid ""
+"  -k, --keep          keep (don't delete) input files\n"
+"  -f, --force         force overwrite of output file and (de)compress links\n"
+"  -c, --stdout        write to standard output and don't delete input files"
+msgstr ""
+"  -k, --keep          ne pas supprimer les fichiers d'entrée (\"keep\")\n"
+"  -f, --force         forcer l'écrasement du fichier de sortie et\n"
+"                      (dé)compresser les liens\n"
+"  -c, --stdout        écrire sur la sortie standard et ne pas supprimer les\n"
+"                      fichiers d'entrée"
+
+#: src/xz/message.c:1117
+msgid ""
+"      --single-stream decompress only the first stream, and silently\n"
+"                      ignore possible remaining input data"
+msgstr ""
+"      --single-stream décompresser uniquement le premier flux et ignorer\n"
+"                      silenciseusement les données éventuellement restantes"
+
+#: src/xz/message.c:1120
+msgid ""
+"      --no-sparse     do not create sparse files when decompressing\n"
+"  -S, --suffix=.SUF   use the suffix `.SUF' on compressed files\n"
+"      --files[=FILE]  read filenames to process from FILE; if FILE is\n"
+"                      omitted, filenames are read from the standard input;\n"
+"                      filenames must be terminated with the newline character\n"
+"      --files0[=FILE] like --files but use the null character as terminator"
+msgstr ""
+"      --no-sparse     ne pas créer de 'sparse file' lors de la décompression\n"
+"  -S, --suffix=.SUF   utiliser le suffixe `.SUF' pour les fichiers compressés\n"
+"      --files[=FILE]  lire les fichiers sur lesquels opérer depuis FILE ; si\n"
+"                      FILE est omis, ceux-ci sont lus depuis l'entrée standard\n"
+"                      et doivent être suivis d'un caractère de retour à la ligne\n"
+"      --files0[=FILE] comme --files mais avec un caractère null comme séparateur"
+
+#: src/xz/message.c:1129
+msgid ""
+"\n"
+" Basic file format and compression options:\n"
+msgstr ""
+"\n"
+" Options basiques de format de fichier et de compression :\n"
+
+#: src/xz/message.c:1131
+msgid ""
+"  -F, --format=FMT    file format to encode or decode; possible values are\n"
+"                      `auto' (default), `xz', `lzma', and `raw'\n"
+"  -C, --check=CHECK   integrity check type: `none' (use with caution),\n"
+"                      `crc32', `crc64' (default), or `sha256'"
+msgstr ""
+"  -F, --format=FMT    format de fichier à encoder ou décoder ; les possibilités\n"
+"                      sont : `auto' (par défaut), `xz', `lzma' et `raw'\n"
+"  -C, --check=CHECK   type de vérification d'intégrité : `none' (à utiliser avec\n"
+"                      précaution), `crc32', `crc64' (par défaut) ou `sha256'"
+
+#: src/xz/message.c:1138
+msgid ""
+"  -0 ... -9           compression preset; default is 6; take compressor *and*\n"
+"                      decompressor memory usage into account before using 7-9!"
+msgstr ""
+"  -0 ... -9           préréglage de compression ; 6 par défaut ; pensez à\n"
+"                      l'utilisation mémoire du compresseur *et* du décompresseur\n"
+"                      avant d'utiliser 7, 8 ou 9 !"
+
+#: src/xz/message.c:1142
+msgid ""
+"  -e, --extreme       try to improve compression ratio by using more CPU time;\n"
+"                      does not affect decompressor memory requirements"
+msgstr ""
+"  -e, --extreme       essayer d'améliorer la compression en utilisant davantage\n"
+"                      de temps processeur sans affecter les besoins mémoire du\n"
+"                      décompresseur"
+
+#: src/xz/message.c:1147
+msgid ""
+"      --block-size=SIZE\n"
+"                      when compressing to the .xz format, start a new block\n"
+"                      after every SIZE bytes of input; 0=disabled (default)"
+msgstr ""
+"      --block-size=SIZE\n"
+"                      pour une compression au format .xz, entamer un nouveau\n"
+"                      bloc après SIZE octets d'entrée ; 0=désactivé (par défaut)"
+
+#: src/xz/message.c:1151
+#, no-c-format
+msgid ""
+"      --memlimit-compress=LIMIT\n"
+"      --memlimit-decompress=LIMIT\n"
+"  -M, --memlimit=LIMIT\n"
+"                      set memory usage limit for compression, decompression,\n"
+"                      or both; LIMIT is in bytes, % of RAM, or 0 for defaults"
+msgstr ""
+"      --memlimit-compress=LIMIT\n"
+"      --memlimit-decompress=LIMIT\n"
+"  -M, --memlimit=LIMIT\n"
+"                      règle la limite d'utilisation mémoire pour la compression,\n"
+"                      décompression ou les deux ; LIMIT est en octets, % de\n"
+"                      RAM, ou 0 pour les valeurs par défaut"
+
+#: src/xz/message.c:1158
+msgid ""
+"      --no-adjust     if compression settings exceed the memory usage limit,\n"
+"                      give an error instead of adjusting the settings downwards"
+msgstr ""
+"      --no-adjust     si les réglages de compression dépassent la limite\n"
+"                      d'utilisation mémoire, renvoyer une erreur plutôt que de\n"
+"                      diminuer les réglages"
+
+#: src/xz/message.c:1164
+msgid ""
+"\n"
+" Custom filter chain for compression (alternative for using presets):"
+msgstr ""
+"\n"
+" Enchaînement de filtres de compression personnalisé (au lieu des préréglages) :"
+
+#: src/xz/message.c:1173
+msgid ""
+"\n"
+"  --lzma1[=OPTS]      LZMA1 or LZMA2; OPTS is a comma-separated list of zero or\n"
+"  --lzma2[=OPTS]      more of the following options (valid values; default):\n"
+"                        preset=PRE reset options to a preset (0-9[e])\n"
+"                        dict=NUM   dictionary size (4KiB - 1536MiB; 8MiB)\n"
+"                        lc=NUM     number of literal context bits (0-4; 3)\n"
+"                        lp=NUM     number of literal position bits (0-4; 0)\n"
+"                        pb=NUM     number of position bits (0-4; 2)\n"
+"                        mode=MODE  compression mode (fast, normal; normal)\n"
+"                        nice=NUM   nice length of a match (2-273; 64)\n"
+"                        mf=NAME    match finder (hc3, hc4, bt2, bt3, bt4; bt4)\n"
+"                        depth=NUM  maximum search depth; 0=automatic (default)"
+msgstr ""
+"\n"
+"  --lzma1[=OPTS]      LZMA1 ou LZMA2 ; OPTS est une liste de zéro ou plusieurs\n"
+"  --lzma2[=OPTS]      options parmi les suivantes (vals. valides ; par défaut) :\n"
+"                        preset=PRE remettre les options à un préréglage (0-9[e])\n"
+"                        dict=NUM   taille dictionnaire (4KiB - 1536MiB ; 8MiB)\n"
+"                        lc=NUM     nombre de 'literal context bits' (0-4 ; 3)\n"
+"                        lp=NUM     nombre de 'literal position bits' (0-4 ; 0)\n"
+"                        pb=NUM     nombre de 'position bits' (0-4 ; 2)\n"
+"                        mode=MODE  mode de compression (fast, normal ; normal)\n"
+"                        nice=NUM   nice length of a match (2-273; 64)\n"
+"                        mf=NAME    'match finder' (hc3, hc4, bt2, bt3, bt4; bt4)\n"
+"                        depth=NUM  profondeur de recherche maximale ;\n"
+"                                      0=automatique (par défaut)"
+
+#: src/xz/message.c:1188
+msgid ""
+"\n"
+"  --x86[=OPTS]        x86 BCJ filter (32-bit and 64-bit)\n"
+"  --powerpc[=OPTS]    PowerPC BCJ filter (big endian only)\n"
+"  --ia64[=OPTS]       IA-64 (Itanium) BCJ filter\n"
+"  --arm[=OPTS]        ARM BCJ filter (little endian only)\n"
+"  --armthumb[=OPTS]   ARM-Thumb BCJ filter (little endian only)\n"
+"  --sparc[=OPTS]      SPARC BCJ filter\n"
+"                      Valid OPTS for all BCJ filters:\n"
+"                        start=NUM  start offset for conversions (default=0)"
+msgstr ""
+"\n"
+"  --x86[=OPTS]        filtre BCJ x86 (32-bit et 64-bit)\n"
+"  --powerpc[=OPTS]    filtre BCJ PowerPC ('big endian' uniquement)\n"
+"  --ia64[=OPTS]       filtre BCJ IA-64 (Itanium)\n"
+"  --arm[=OPTS]        filtre BCJ ARM ('little endian' uniquement)\n"
+"  --armthumb[=OPTS]   filtre BCJ ARM-Thumb ('little endian' uniquement)\n"
+"  --sparc[=OPTS]      filtre BCJ SPARC\n"
+"                      OPTS valides pour tous les filtres BCJ :\n"
+"                        start=NUM  start offset for conversions (default=0)"
+
+#: src/xz/message.c:1200
+msgid ""
+"\n"
+"  --delta[=OPTS]      Delta filter; valid OPTS (valid values; default):\n"
+"                        dist=NUM   distance between bytes being subtracted\n"
+"                                   from each other (1-256; 1)"
+msgstr ""
+"\n"
+"  --delta[=OPTS]      Filtre delta ; OPTS valides (vals. valides ; par défaut) :\n"
+"                        dist=NUM   distance entre les octets soustraits\n"
+"                                   les uns aux autres (1-256 ; 1)"
+
+#: src/xz/message.c:1208
+msgid ""
+"\n"
+" Other options:\n"
+msgstr ""
+"\n"
+" Autres options :\n"
+
+#: src/xz/message.c:1211
+msgid ""
+"  -q, --quiet         suppress warnings; specify twice to suppress errors too\n"
+"  -v, --verbose       be verbose; specify twice for even more verbose"
+msgstr ""
+"  -q, --quiet         supprimer les avertissemnts ; spécifier deux fois pour\n"
+"                      aussi supprimer les erreur\n"
+"  -v, --verbose       être bavard ; spécifier deux fois pour l'être davantage"
+
+#: src/xz/message.c:1216
+msgid "  -Q, --no-warn       make warnings not affect the exit status"
+msgstr "  -Q, --no-warn       les avertissements ne modifient pas le code de sortie"
+
+#: src/xz/message.c:1218
+msgid "      --robot         use machine-parsable messages (useful for scripts)"
+msgstr ""
+"      --robot         utiliser des messages lisibles par un programme\n"
+"                      (utile pour les scripts)"
+
+#: src/xz/message.c:1221
+msgid ""
+"      --info-memory   display the total amount of RAM and the currently active\n"
+"                      memory usage limits, and exit"
+msgstr ""
+"      --info-memory   affiche la quantité totale de RAM et la limite actuelle\n"
+"                      en mémoire puis quitte"
+
+#: src/xz/message.c:1224
+msgid ""
+"  -h, --help          display the short help (lists only the basic options)\n"
+"  -H, --long-help     display this long help and exit"
+msgstr ""
+"  -h, --help          affiche l'aide courte (ne liste que les options de base)\n"
+"  -H, --long-help     affiche l'aide longue (ceci) puis quitte"
+
+#: src/xz/message.c:1228
+msgid ""
+"  -h, --help          display this short help and exit\n"
+"  -H, --long-help     display the long help (lists also the advanced options)"
+msgstr ""
+"  -h, --help          affiche l'aide courte (ceci) puis quitte\n"
+"  -H, --long-help     affiche l'aide longue (liste aussi les options avancées)"
+
+#: src/xz/message.c:1233
+msgid "  -V, --version       display the version number and exit"
+msgstr "  -V, --version       affiche le numéro de version puis quitte"
+
+#: src/xz/message.c:1235
+msgid ""
+"\n"
+"With no FILE, or when FILE is -, read standard input.\n"
+msgstr ""
+"\n"
+"Sans FILE ou quand FILE est -, lire l'entrée standard.\n"
+
+#. TRANSLATORS: This message indicates the bug reporting address
+#. for this package. Please add _another line_ saying
+#. "Report translation bugs to <...>\n" with the email or WWW
+#. address for translation bugs. Thanks.
+#: src/xz/message.c:1241
+#, c-format
+msgid "Report bugs to <%s> (in English or Finnish).\n"
+msgstr ""
+"Signaler les bogues à <%s> (en anglais ou en finlandais).\n"
+"Signaler les bogues de traduction à <camaradetux@gmail.com>.\n"
+
+#: src/xz/message.c:1243
+#, c-format
+msgid "%s home page: <%s>\n"
+msgstr "%s page du projet : <%s>\n"
+
+#: src/xz/options.c:86
+#, c-format
+msgid "%s: Options must be `name=value' pairs separated with commas"
+msgstr "%s: Les options doivent être des paires `nom=valeur' séparées par des virgules"
+
+#: src/xz/options.c:93
+#, c-format
+msgid "%s: Invalid option name"
+msgstr "%s : Nom d'option invalide"
+
+#: src/xz/options.c:113
+#, c-format
+msgid "%s: Invalid option value"
+msgstr "%s : Valeur d'option invalide"
+
+#: src/xz/options.c:247
+#, c-format
+msgid "Unsupported LZMA1/LZMA2 preset: %s"
+msgstr "Préréglage LZMA1/LZMA2 non pris en charge : %s"
+
+#: src/xz/options.c:355
+msgid "The sum of lc and lp must not exceed 4"
+msgstr "La somme de lc et lp ne doit pas dépasser 4"
+
+#: src/xz/options.c:359
+#, c-format
+msgid "The selected match finder requires at least nice=%<PRIu32>"
+msgstr "Le `match finder' choisi nécessite au moins nice=%<PRIu32>"
+
+#: src/xz/suffix.c:133 src/xz/suffix.c:258
+#, c-format
+msgid "%s: With --format=raw, --suffix=.SUF is required unless writing to stdout"
+msgstr "%s : Avec --format=raw, --suffix=.SUF est nécessaire sauf lors de l'écriture vers stdout"
+
+#: src/xz/suffix.c:164
+#, c-format
+msgid "%s: Filename has an unknown suffix, skipping"
+msgstr "%s : Le fichier a un suffixe inconnu, ignoré"
+
+#: src/xz/suffix.c:185
+#, c-format
+msgid "%s: File already has `%s' suffix, skipping"
+msgstr "%s : Le fichier a déjà le suffixe '%s', ignoré"
+
+#: src/xz/suffix.c:393
+#, c-format
+msgid "%s: Invalid filename suffix"
+msgstr "%s: Suffixe de nom de fichier invalide"
+
+#: src/xz/util.c:61
+#, c-format
+msgid "%s: Value is not a non-negative decimal integer"
+msgstr "%s : La valeur n'est pas un entier décimal non négatif"
+
+#: src/xz/util.c:103
+#, c-format
+msgid "%s: Invalid multiplier suffix"
+msgstr "%s : Suffixe multiplicateur invalide"
+
+#: src/xz/util.c:105
+msgid "Valid suffixes are `KiB' (2^10), `MiB' (2^20), and `GiB' (2^30)."
+msgstr "Les suffixes valides sont 'KiB' (2^10), 'MiB' (2^20) et 'GiB' (2^30)."
+
+#: src/xz/util.c:122
+#, c-format
+msgid "Value of the option `%s' must be in the range [%<PRIu64>, %<PRIu64>]"
+msgstr "La valeur de l'option '%s' doit être inclue entre %<PRIu64> et %<PRIu64>"
+
+#: src/xz/util.c:247
+msgid "Empty filename, skipping"
+msgstr "Nom de fichier vide, ignoré"
+
+#: src/xz/util.c:261
+msgid "Compressed data cannot be read from a terminal"
+msgstr "Les données compressées ne peuvent pas être lues depuis un terminal"
+
+#: src/xz/util.c:274
+msgid "Compressed data cannot be written to a terminal"
+msgstr "Les données compressées ne peuvent pas être écrites dans un terminal"
+
+#: src/common/tuklib_exit.c:39
+msgid "Writing to standard output failed"
+msgstr "Impossible d'écrire vers la sortie standard"
+
+#: src/common/tuklib_exit.c:42
+msgid "Unknown error"
+msgstr "Erreur inconnue"

src/common/mythread.h

@@ -1,7 +1,7 @@
 ///////////////////////////////////////////////////////////////////////////////
 //
 /// \file       mythread.h
-/// \brief      Some threading related helper macros and functions
+/// \brief      Wrappers for threads
 //
 //  Author:     Lasse Collin
 //
@@ -14,189 +14,29 @@
 
 
 #ifdef HAVE_PTHREAD
+#	include <pthread.h>
 
-////////////////////
-// Using pthreads //
-////////////////////
+#	define mythread_once(func) \
+	do { \
+		static pthread_once_t once_ = PTHREAD_ONCE_INIT; \
+		pthread_once(&once_, &func); \
+	} while (0)
 
-#include <pthread.h>
-#include <signal.h>
-#include <time.h>
-#include <unistd.h>
-
-
-/// \brief      Set the process signal mask
-///
-/// If threads are disabled, sigprocmask() is used instead
-/// of pthread_sigmask().
-#define mythread_sigmask(how, set, oset) \
-	pthread_sigmask(how, set, oset)
-
-
-/// \brief      Call the given function once
-///
-/// If threads are disabled, a thread-unsafe version is used.
-#define mythread_once(func) \
-do { \
-	static pthread_once_t once_ = PTHREAD_ONCE_INIT; \
-	pthread_once(&once_, &func); \
-} while (0)
-
-
-/// \brief      Lock a mutex for a duration of a block
-///
-/// Perform pthread_mutex_lock(&mutex) in the beginning of a block
-/// and pthread_mutex_unlock(&mutex) at the end of the block. "break"
-/// may be used to unlock the mutex and jump out of the block.
-/// mythread_sync blocks may be nested.
-///
-/// Example:
-///
-///     mythread_sync(mutex) {
-///         foo();
-///         if (some_error)
-///             break; // Skips bar()
-///         bar();
-///     }
-///
-/// At least GCC optimizes the loops completely away so it doesn't slow
-/// things down at all compared to plain pthread_mutex_lock(&mutex)
-/// and pthread_mutex_unlock(&mutex) calls.
-///
-#define mythread_sync(mutex) mythread_sync_helper(mutex, __LINE__)
-#define mythread_sync_helper(mutex, line) \
-	for (unsigned int mythread_i_ ## line = 0; \
-			mythread_i_ ## line \
-				? (pthread_mutex_unlock(&(mutex)), 0) \
-				: (pthread_mutex_lock(&(mutex)), 1); \
-			mythread_i_ ## line = 1) \
-		for (unsigned int mythread_j_ ## line = 0; \
-				!mythread_j_ ## line; \
-				mythread_j_ ## line = 1)
-
-
-typedef struct {
-	/// Condition variable
-	pthread_cond_t cond;
-
-	/// Clock ID (CLOCK_REALTIME or CLOCK_MONOTONIC) associated with
-	/// the condition variable
-	clockid_t clk_id;
-
-} mythread_cond;
-
-
-/// \brief      Initialize a condition variable to use CLOCK_MONOTONIC
-///
-/// Using CLOCK_MONOTONIC instead of the default CLOCK_REALTIME makes the
-/// timeout in pthread_cond_timedwait() work correctly also if system time
-/// is suddenly changed. Unfortunately CLOCK_MONOTONIC isn't available
-/// everywhere while the default CLOCK_REALTIME is, so the default is
-/// used if CLOCK_MONOTONIC isn't available.
-static inline int
-mythread_cond_init(mythread_cond *mycond)
-{
-#if defined(_POSIX_CLOCK_SELECTION) && defined(_POSIX_MONOTONIC_CLOCK)
-	struct timespec ts;
-	pthread_condattr_t condattr;
-
-	// POSIX doesn't seem to *require* that pthread_condattr_setclock()
-	// will fail if given an unsupported clock ID. Test that
-	// CLOCK_MONOTONIC really is supported using clock_gettime().
-	if (clock_gettime(CLOCK_MONOTONIC, &ts) == 0
-			&& pthread_condattr_init(&condattr) == 0) {
-		int ret = pthread_condattr_setclock(
-				&condattr, CLOCK_MONOTONIC);
-		if (ret == 0)
-			ret = pthread_cond_init(&mycond->cond, &condattr);
-
-		pthread_condattr_destroy(&condattr);
-
-		if (ret == 0) {
-			mycond->clk_id = CLOCK_MONOTONIC;
-			return 0;
-		}
-	}
-
-	// If anything above fails, fall back to the default CLOCK_REALTIME.
-#endif
-
-	mycond->clk_id = CLOCK_REALTIME;
-	return pthread_cond_init(&mycond->cond, NULL);
-}
-
-
-/// \brief      Convert relative time to absolute time for use with timed wait
-///
-/// The current time of the clock associated with the condition variable
-/// is added to the relative time in *ts.
-static inline void
-mythread_cond_abstime(const mythread_cond *mycond, struct timespec *ts)
-{
-	struct timespec now;
-	clock_gettime(mycond->clk_id, &now);
-
-	ts->tv_sec += now.tv_sec;
-	ts->tv_nsec += now.tv_nsec;
-
-	// tv_nsec must stay in the range [0, 999_999_999].
-	if (ts->tv_nsec >= 1000000000L) {
-		ts->tv_nsec -= 1000000000L;
-		++ts->tv_sec;
-	}
-
-	return;
-}
-
-
-#define mythread_cond_wait(mycondptr, mutexptr) \
-	pthread_cond_wait(&(mycondptr)->cond, mutexptr)
-
-#define mythread_cond_timedwait(mycondptr, mutexptr, abstimeptr) \
-	pthread_cond_timedwait(&(mycondptr)->cond, mutexptr, abstimeptr)
-
-#define mythread_cond_signal(mycondptr) \
-	pthread_cond_signal(&(mycondptr)->cond)
-
-#define mythread_cond_broadcast(mycondptr) \
-	pthread_cond_broadcast(&(mycondptr)->cond)
-
-#define mythread_cond_destroy(mycondptr) \
-	pthread_cond_destroy(&(mycondptr)->cond)
-
-
-/// \brief      Create a thread with all signals blocked
-static inline int
-mythread_create(pthread_t *thread, void *(*func)(void *arg), void *arg)
-{
-	sigset_t old;
-	sigset_t all;
-	sigfillset(&all);
-
-	pthread_sigmask(SIG_SETMASK, &all, &old);
-	const int ret = pthread_create(thread, NULL, func, arg);
-	pthread_sigmask(SIG_SETMASK, &old, NULL);
-
-	return ret;
-}
+#	define mythread_sigmask(how, set, oset) \
+		pthread_sigmask(how, set, oset)
 
 #else
 
-//////////////////
-// No threading //
-//////////////////
+#	define mythread_once(func) \
+	do { \
+		static bool once_ = false; \
+		if (!once_) { \
+			func(); \
+			once_ = true; \
+		} \
+	} while (0)
 
-#define mythread_sigmask(how, set, oset) \
-	sigprocmask(how, set, oset)
-
-
-#define mythread_once(func) \
-do { \
-	static bool once_ = false; \
-	if (!once_) { \
-		func(); \
-		once_ = true; \
-	} \
-} while (0)
+#	define mythread_sigmask(how, set, oset) \
+		sigprocmask(how, set, oset)
 
 #endif

src/liblzma/Makefile.am

@@ -24,7 +24,7 @@ liblzma_la_CPPFLAGS = \
 	-I$(top_srcdir)/src/liblzma/simple \
 	-I$(top_srcdir)/src/common \
 	-DTUKLIB_SYMBOL_PREFIX=lzma_
-liblzma_la_LDFLAGS = -no-undefined -version-info 5:99:0
+liblzma_la_LDFLAGS = -no-undefined -version-info 5:3:0
 
 include $(srcdir)/common/Makefile.inc
 include $(srcdir)/check/Makefile.inc

src/liblzma/api/lzma/base.h

@@ -332,19 +332,11 @@ typedef enum {
  * malloc() and free(). C++ users should note that the custom memory
  * handling functions must not throw exceptions.
  *
- * Single-threaded mode only: liblzma doesn't make an internal copy of
- * lzma_allocator. Thus, it is OK to change these function pointers in
- * the middle of the coding process, but obviously it must be done
- * carefully to make sure that the replacement `free' can deallocate
- * memory allocated by the earlier `alloc' function(s).
- *
- * Multithreaded mode: liblzma might internally store pointers to the
- * lzma_allocator given via the lzma_stream structure. The application
- * must not change the allocator pointer in lzma_stream or the contents
- * of the pointed lzma_allocator structure until lzma_end() has been used
- * to free the memory associated with that lzma_stream. The allocation
- * functions might be called simultaneously from multiple threads, and
- * thus they must be thread safe.
+ * liblzma doesn't make an internal copy of lzma_allocator. Thus, it is
+ * OK to change these function pointers in the middle of the coding
+ * process, but obviously it must be done carefully to make sure that the
+ * replacement `free' can deallocate memory allocated by the earlier
+ * `alloc' function(s).
  */
 typedef struct {
 	/**

src/liblzma/api/lzma/container.h

@@ -60,129 +60,6 @@
 #define LZMA_PRESET_EXTREME       (UINT32_C(1) << 31)
 
 
-#ifdef LZMA_UNSTABLE /* Unstable API that may change. Use only for testing. */
-/**
- * \brief       Multithreading options
- */
-typedef struct {
-	/**
-	 * \brief       Flags
-	 *
-	 * Set this to zero if no flags are wanted.
-	 *
-	 * No flags are currently supported.
-	 */
-	uint32_t flags;
-
-	/**
-	 * \brief       Number of worker threads to use
-	 */
-	uint32_t threads;
-
-	/**
-	 * \brief       Maximum uncompressed size of a Block
-	 *
-	 * The encoder will start a new .xz Block every block_size bytes.
-	 * Using LZMA_FULL_FLUSH or LZMA_FULL_BARRIER with lzma_code()
-	 * the caller may tell liblzma to start a new Block earlier.
-	 *
-	 * With LZMA2, a recommended block size is 2-4 times the LZMA2
-	 * dictionary size. With very small dictionaries, it is recommended
-	 * to use at least 1 MiB block size for good compression ratio, even
-	 * if this is more than four times the dictionary size. Note that
-	 * these are only recommendations for typical use cases; feel free
-	 * to use other values. Just keep in mind that using a block size
-	 * less than the LZMA2 dictionary size is waste of RAM.
-	 *
-	 * Set this to 0 to let liblzma choose the block size depending
-	 * on the compression options. For LZMA2 it will be 3*dict_size
-	 * or 1 MiB, whichever is more.
-	 */
-	uint64_t block_size;
-
-	/**
-	 * \brief       Timeout to allow lzma_code() to return early
-	 *
-	 * Multithreading can make liblzma to consume input and produce
-	 * output in a very bursty way: it may first read a lot of input
-	 * to fill internal buffers, then no input or output occurs for
-	 * a while.
-	 *
-	 * In single-threaded mode, lzma_code() won't return until it has
-	 * either consumed all the input or filled the output buffer. If
-	 * this is done in multithreaded mode, it may cause a call
-	 * lzma_code() to take even tens of seconds, which isn't acceptable
-	 * in all applications.
-	 *
-	 * To avoid very long blocking times in lzma_code(), a timeout
-	 * (in milliseconds) may be set here. If lzma_code() would block
-	 * longer than this number of milliseconds, it will return with
-	 * LZMA_OK. Reasonable values are 100 ms or more. The xz command
-	 * line tool uses 300 ms.
-	 *
-	 * If long blocking times are fine for you, set timeout to a special
-	 * value of 0, which will disable the timeout mechanism and will make
-	 * lzma_code() block until all the input is consumed or the output
-	 * buffer has been filled.
-	 *
-	 * \note        Even with a timeout, lzma_code() might sometimes take
-	 *              somewhat long time to return. No timing guarantees
-	 *              are made.
-	 */
-	uint32_t timeout;
-
-	/**
-	 * \brief       Compression preset (level and possible flags)
-	 *
-	 * The preset is set just like with lzma_easy_encoder().
-	 * The preset is ignored if filters below is non-NULL.
-	 */
-	uint32_t preset;
-
-	/**
-	 * \brief       Filter chain (alternative to a preset)
-	 *
-	 * If this is NULL, the preset above is used. Otherwise the preset
-	 * is ignored and the filter chain specified here is used.
-	 */
-	const lzma_filter *filters;
-
-	/**
-	 * \brief       Integrity check type
-	 *
-	 * See check.h for available checks. The xz command line tool
-	 * defaults to LZMA_CHECK_CRC64, which is a good choice if you
-	 * are unsure.
-	 */
-	lzma_check check;
-
-	/*
-	 * Reserved space to allow possible future extensions without
-	 * breaking the ABI. You should not touch these, because the names
-	 * of these variables may change. These are and will never be used
-	 * with the currently supported options, so it is safe to leave these
-	 * uninitialized.
-	 */
-	lzma_reserved_enum reserved_enum1;
-	lzma_reserved_enum reserved_enum2;
-	lzma_reserved_enum reserved_enum3;
-	uint32_t reserved_int1;
-	uint32_t reserved_int2;
-	uint32_t reserved_int3;
-	uint32_t reserved_int4;
-	uint64_t reserved_int5;
-	uint64_t reserved_int6;
-	uint64_t reserved_int7;
-	uint64_t reserved_int8;
-	void *reserved_ptr1;
-	void *reserved_ptr2;
-	void *reserved_ptr3;
-	void *reserved_ptr4;
-
-} lzma_mt;
-#endif
-
-
 /**
  * \brief       Calculate approximate memory usage of easy encoder
  *
@@ -313,50 +190,6 @@ extern LZMA_API(lzma_ret) lzma_stream_encoder(lzma_stream *strm,
 		lzma_nothrow lzma_attr_warn_unused_result;
 
 
-#ifdef LZMA_UNSTABLE /* Unstable API that may change. Use only for testing. */
-/**
- * \brief       Calculate approximate memory usage of multithreaded .xz encoder
- *
- * Since doing the encoding in threaded mode doesn't affect the memory
- * requirements of single-threaded decompressor, you can use
- * lzma_easy_decoder_memusage(options->preset) or
- * lzma_raw_decoder_memusage(options->filters) to calculate
- * the decompressor memory requirements.
- *
- * \param       options Compression options
- *
- * \return      Number of bytes of memory required for encoding with the
- *              given options. If an error occurs, for example due to
- *              unsupported preset or filter chain, UINT64_MAX is returned.
- */
-extern LZMA_API(uint64_t) lzma_stream_encoder_mt_memusage(
-		const lzma_mt *options) lzma_nothrow lzma_attr_pure;
-
-
-/**
- * \brief       Initialize multithreaded .xz Stream encoder
- *
- * This provides the functionality of lzma_easy_encoder() and
- * lzma_stream_encoder() as a single function for multithreaded use.
- *
- * TODO: For lzma_code(), only LZMA_RUN and LZMA_FINISH are currently
- * supported. Support for other actions has been planned.
- *
- * \param       strm    Pointer to properly prepared lzma_stream
- * \param       options Pointer to multithreaded compression options
- *
- * \return      - LZMA_OK
- *              - LZMA_MEM_ERROR
- *              - LZMA_UNSUPPORTED_CHECK
- *              - LZMA_OPTIONS_ERROR
- *              - LZMA_PROG_ERROR
- */
-extern LZMA_API(lzma_ret) lzma_stream_encoder_mt(
-		lzma_stream *strm, const lzma_mt *options)
-		lzma_nothrow lzma_attr_warn_unused_result;
-#endif
-
-
 /**
  * \brief       Initialize .lzma encoder (legacy file format)
  *

src/liblzma/api/lzma/version.h

@@ -21,9 +21,9 @@
  * Version number split into components
  */
 #define LZMA_VERSION_MAJOR 5
-#define LZMA_VERSION_MINOR 1
-#define LZMA_VERSION_PATCH 1
-#define LZMA_VERSION_STABILITY LZMA_VERSION_STABILITY_ALPHA
+#define LZMA_VERSION_MINOR 0
+#define LZMA_VERSION_PATCH 3
+#define LZMA_VERSION_STABILITY LZMA_VERSION_STABILITY_STABLE
 
 #ifndef LZMA_VERSION_COMMIT
 #	define LZMA_VERSION_COMMIT ""

src/liblzma/check/sha256.c

@@ -22,13 +22,13 @@
 //
 ///////////////////////////////////////////////////////////////////////////////
 
-#include "check.h"
-
 // Avoid bogus warnings in transform().
-#if TUKLIB_GNUC_REQ(4, 2)
+#if (__GNUC__ == 4 && __GNUC_MINOR__ >= 2) || __GNUC__ > 4
 #	pragma GCC diagnostic ignored "-Wuninitialized"
 #endif
 
+#include "check.h"
+
 // At least on x86, GCC is able to optimize this to a rotate instruction.
 #define rotr_32(num, amount) ((num) >> (amount) | (num) << (32 - (amount)))
 

src/liblzma/common/Makefile.inc

@@ -38,15 +38,9 @@ liblzma_la_SOURCES += \
 	common/index_encoder.h \
 	common/stream_buffer_encoder.c \
 	common/stream_encoder.c \
+	common/stream_encoder.h \
 	common/stream_flags_encoder.c \
 	common/vli_encoder.c
-
-if COND_THREADS
-liblzma_la_SOURCES += \
-	common/outqueue.c \
-	common/outqueue.h \
-	common/stream_encoder_mt.c
-endif
 endif
 
 if COND_MAIN_DECODER

src/liblzma/common/alone_decoder.c

@@ -46,7 +46,7 @@ struct lzma_coder_s {
 
 static lzma_ret
 alone_decode(lzma_coder *coder,
-		lzma_allocator *allocator lzma_attribute((unused)),
+		lzma_allocator *allocator lzma_attribute((__unused__)),
 		const uint8_t *restrict in, size_t *restrict in_pos,
 		size_t in_size, uint8_t *restrict out,
 		size_t *restrict out_pos, size_t out_size,

src/liblzma/common/alone_encoder.c

@@ -32,7 +32,7 @@ struct lzma_coder_s {
 
 static lzma_ret
 alone_encode(lzma_coder *coder,
-		lzma_allocator *allocator lzma_attribute((unused)),
+		lzma_allocator *allocator lzma_attribute((__unused__)),
 		const uint8_t *restrict in, size_t *restrict in_pos,
 		size_t in_size, uint8_t *restrict out,
 		size_t *restrict out_pos, size_t out_size,

src/liblzma/common/block_encoder.c

@@ -144,7 +144,7 @@ block_encoder_end(lzma_coder *coder, lzma_allocator *allocator)
 
 static lzma_ret
 block_encoder_update(lzma_coder *coder, lzma_allocator *allocator,
-		const lzma_filter *filters lzma_attribute((unused)),
+		const lzma_filter *filters lzma_attribute((__unused__)),
 		const lzma_filter *reversed_filters)
 {
 	if (coder->sequence != SEQ_CODE)

src/liblzma/common/common.c

@@ -35,7 +35,7 @@ lzma_version_string(void)
 // Memory allocation //
 ///////////////////////
 
-extern void * lzma_attribute((malloc))
+extern void * lzma_attribute((__malloc__)) lzma_attr_alloc_size(1)
 lzma_alloc(size_t size, lzma_allocator *allocator)
 {
 	// Some malloc() variants return NULL if called with size == 0.
@@ -156,8 +156,10 @@ lzma_strm_init(lzma_stream *strm)
 		strm->internal->next = LZMA_NEXT_CODER_INIT;
 	}
 
-	memzero(strm->internal->supported_actions,
-			sizeof(strm->internal->supported_actions));
+	strm->internal->supported_actions[LZMA_RUN] = false;
+	strm->internal->supported_actions[LZMA_SYNC_FLUSH] = false;
+	strm->internal->supported_actions[LZMA_FULL_FLUSH] = false;
+	strm->internal->supported_actions[LZMA_FINISH] = false;
 	strm->internal->sequence = ISEQ_RUN;
 	strm->internal->allow_buf_error = false;
 
@@ -263,9 +265,7 @@ lzma_code(lzma_stream *strm, lzma_action action)
 
 	strm->internal->avail_in = strm->avail_in;
 
-	// Cast is needed to silence a warning about LZMA_TIMED_OUT, which
-	// isn't part of lzma_ret enumeration.
-	switch ((unsigned int)(ret)) {
+	switch (ret) {
 	case LZMA_OK:
 		// Don't return LZMA_BUF_ERROR when it happens the first time.
 		// This is to avoid returning LZMA_BUF_ERROR when avail_out
@@ -281,11 +281,6 @@ lzma_code(lzma_stream *strm, lzma_action action)
 		}
 		break;
 
-	case LZMA_TIMED_OUT:
-		strm->internal->allow_buf_error = false;
-		ret = LZMA_OK;
-		break;
-
 	case LZMA_STREAM_END:
 		if (strm->internal->sequence == ISEQ_SYNC_FLUSH
 				|| strm->internal->sequence == ISEQ_FULL_FLUSH)

src/liblzma/common/common.h

@@ -32,8 +32,6 @@
 
 #define LZMA_API(type) LZMA_API_EXPORT type LZMA_API_CALL
 
-#define LZMA_UNSTABLE
-
 #include "lzma.h"
 
 // These allow helping the compiler in some often-executed branches, whose
@@ -51,13 +49,6 @@
 #define LZMA_BUFFER_SIZE 4096
 
 
-/// Maximum number of worker threads within one multithreaded component.
-/// The limit exists solely to make it simpler to prevent integer overflows
-/// when allocating structures etc. This should be big enough for now...
-/// the code won't scale anywhere close to this number anyway.
-#define LZMA_THREADS_MAX 16384
-
-
 /// Starting value for memory usage estimates. Instead of calculating size
 /// of _every_ structure and taking into account malloc() overhead etc., we
 /// add a base size to all memory usage estimates. It's not very accurate
@@ -78,13 +69,6 @@
 	| LZMA_CONCATENATED )
 
 
-/// Special return value (lzma_ret) to indicate that a timeout was reached
-/// and lzma_code() must not return LZMA_BUF_ERROR. This is converted to
-/// LZMA_OK in lzma_code(). This is not in the lzma_ret enumeration because
-/// there's no need to have it in the public API.
-#define LZMA_TIMED_OUT 32
-
-
 /// Type of encoder/decoder specific data; the actual structure is defined
 /// differently in different coders.
 typedef struct lzma_coder_s lzma_coder;
@@ -221,7 +205,7 @@ struct lzma_internal_s {
 
 /// Allocates memory
 extern void *lzma_alloc(size_t size, lzma_allocator *allocator)
-		lzma_attribute((malloc)) lzma_attr_alloc_size(1);
+		lzma_attribute((__malloc__)) lzma_attr_alloc_size(1);
 
 /// Frees memory
 extern void lzma_free(void *ptr, lzma_allocator *allocator);

src/liblzma/common/easy_encoder.c

@@ -11,6 +11,7 @@
 ///////////////////////////////////////////////////////////////////////////////
 
 #include "easy_preset.h"
+#include "stream_encoder.h"
 
 
 extern LZMA_API(lzma_ret)

src/liblzma/common/filter_encoder.c

@@ -30,11 +30,11 @@ typedef struct {
 	/// invalid, UINT64_MAX is returned.
 	uint64_t (*memusage)(const void *options);
 
-	/// Calculates the recommended Uncompressed Size for .xz Blocks to
-	/// which the input data can be split to make multithreaded
-	/// encoding possible. If this is NULL, it is assumed that
-	/// the encoder is fast enough with single thread.
-	uint64_t (*block_size)(const void *options);
+	/// Calculates the minimum sane size for Blocks (or other types of
+	/// chunks) to which the input data can be split to make
+	/// multithreaded encoding possible. If this is NULL, it is assumed
+	/// that the encoder is fast enough with single thread.
+	lzma_vli (*chunk_size)(const void *options);
 
 	/// Tells the size of the Filter Properties field. If options are
 	/// invalid, UINT32_MAX is returned. If this is NULL, props_size_fixed
@@ -59,7 +59,7 @@ static const lzma_filter_encoder encoders[] = {
 		.id = LZMA_FILTER_LZMA1,
 		.init = &lzma_lzma_encoder_init,
 		.memusage = &lzma_lzma_encoder_memusage,
-		.block_size = NULL, // FIXME
+		.chunk_size = NULL, // FIXME
 		.props_size_get = NULL,
 		.props_size_fixed = 5,
 		.props_encode = &lzma_lzma_props_encode,
@@ -70,7 +70,7 @@ static const lzma_filter_encoder encoders[] = {
 		.id = LZMA_FILTER_LZMA2,
 		.init = &lzma_lzma2_encoder_init,
 		.memusage = &lzma_lzma2_encoder_memusage,
-		.block_size = &lzma_lzma2_block_size, // FIXME
+		.chunk_size = NULL, // FIXME
 		.props_size_get = NULL,
 		.props_size_fixed = 1,
 		.props_encode = &lzma_lzma2_props_encode,
@@ -81,7 +81,7 @@ static const lzma_filter_encoder encoders[] = {
 		.id = LZMA_FILTER_X86,
 		.init = &lzma_simple_x86_encoder_init,
 		.memusage = NULL,
-		.block_size = NULL,
+		.chunk_size = NULL,
 		.props_size_get = &lzma_simple_props_size,
 		.props_encode = &lzma_simple_props_encode,
 	},
@@ -91,7 +91,7 @@ static const lzma_filter_encoder encoders[] = {
 		.id = LZMA_FILTER_POWERPC,
 		.init = &lzma_simple_powerpc_encoder_init,
 		.memusage = NULL,
-		.block_size = NULL,
+		.chunk_size = NULL,
 		.props_size_get = &lzma_simple_props_size,
 		.props_encode = &lzma_simple_props_encode,
 	},
@@ -101,7 +101,7 @@ static const lzma_filter_encoder encoders[] = {
 		.id = LZMA_FILTER_IA64,
 		.init = &lzma_simple_ia64_encoder_init,
 		.memusage = NULL,
-		.block_size = NULL,
+		.chunk_size = NULL,
 		.props_size_get = &lzma_simple_props_size,
 		.props_encode = &lzma_simple_props_encode,
 	},
@@ -111,7 +111,7 @@ static const lzma_filter_encoder encoders[] = {
 		.id = LZMA_FILTER_ARM,
 		.init = &lzma_simple_arm_encoder_init,
 		.memusage = NULL,
-		.block_size = NULL,
+		.chunk_size = NULL,
 		.props_size_get = &lzma_simple_props_size,
 		.props_encode = &lzma_simple_props_encode,
 	},
@@ -121,7 +121,7 @@ static const lzma_filter_encoder encoders[] = {
 		.id = LZMA_FILTER_ARMTHUMB,
 		.init = &lzma_simple_armthumb_encoder_init,
 		.memusage = NULL,
-		.block_size = NULL,
+		.chunk_size = NULL,
 		.props_size_get = &lzma_simple_props_size,
 		.props_encode = &lzma_simple_props_encode,
 	},
@@ -131,7 +131,7 @@ static const lzma_filter_encoder encoders[] = {
 		.id = LZMA_FILTER_SPARC,
 		.init = &lzma_simple_sparc_encoder_init,
 		.memusage = NULL,
-		.block_size = NULL,
+		.chunk_size = NULL,
 		.props_size_get = &lzma_simple_props_size,
 		.props_encode = &lzma_simple_props_encode,
 	},
@@ -141,7 +141,7 @@ static const lzma_filter_encoder encoders[] = {
 		.id = LZMA_FILTER_DELTA,
 		.init = &lzma_delta_encoder_init,
 		.memusage = &lzma_delta_coder_memusage,
-		.block_size = NULL,
+		.chunk_size = NULL,
 		.props_size_get = NULL,
 		.props_size_fixed = 1,
 		.props_encode = &lzma_delta_props_encode,
@@ -226,19 +226,20 @@ lzma_raw_encoder_memusage(const lzma_filter *filters)
 }
 
 
-extern uint64_t
-lzma_mt_block_size(const lzma_filter *filters)
+/*
+extern LZMA_API(lzma_vli)
+lzma_chunk_size(const lzma_filter *filters)
 {
-	uint64_t max = 0;
+	lzma_vli max = 0;
 
 	for (size_t i = 0; filters[i].id != LZMA_VLI_UNKNOWN; ++i) {
 		const lzma_filter_encoder *const fe
 				= encoder_find(filters[i].id);
-		if (fe->block_size != NULL) {
-			const uint64_t size
-					= fe->block_size(filters[i].options);
-			if (size == 0)
-				return 0;
+		if (fe->chunk_size != NULL) {
+			const lzma_vli size
+					= fe->chunk_size(filters[i].options);
+			if (size == LZMA_VLI_UNKNOWN)
+				return LZMA_VLI_UNKNOWN;
 
 			if (size > max)
 				max = size;
@@ -247,6 +248,7 @@ lzma_mt_block_size(const lzma_filter *filters)
 
 	return max;
 }
+*/
 
 
 extern LZMA_API(lzma_ret)

src/liblzma/common/filter_encoder.h

@@ -16,8 +16,8 @@
 #include "common.h"
 
 
-// FIXME: Might become a part of the public API.
-extern uint64_t lzma_mt_block_size(const lzma_filter *filters);
+// FIXME: Might become a part of the public API once finished.
+// extern lzma_vli lzma_chunk_size(const lzma_filter *filters);
 
 
 extern lzma_ret lzma_raw_encoder_init(

src/liblzma/common/index_decoder.c

@@ -56,10 +56,11 @@ struct lzma_coder_s {
 static lzma_ret
 index_decode(lzma_coder *coder, lzma_allocator *allocator,
 		const uint8_t *restrict in, size_t *restrict in_pos,
-		size_t in_size, uint8_t *restrict out lzma_attribute((unused)),
-		size_t *restrict out_pos lzma_attribute((unused)),
-		size_t out_size lzma_attribute((unused)),
-		lzma_action action lzma_attribute((unused)))
+		size_t in_size,
+		uint8_t *restrict out lzma_attribute((__unused__)),
+		size_t *restrict out_pos lzma_attribute((__unused__)),
+		size_t out_size lzma_attribute((__unused__)),
+		lzma_action action lzma_attribute((__unused__)))
 {
 	// Similar optimization as in index_encoder.c
 	const size_t in_start = *in_pos;

src/liblzma/common/index_encoder.c

@@ -42,12 +42,13 @@ struct lzma_coder_s {
 
 static lzma_ret
 index_encode(lzma_coder *coder,
-		lzma_allocator *allocator lzma_attribute((unused)),
-		const uint8_t *restrict in lzma_attribute((unused)),
-		size_t *restrict in_pos lzma_attribute((unused)),
-		size_t in_size lzma_attribute((unused)),
+		lzma_allocator *allocator lzma_attribute((__unused__)),
+		const uint8_t *restrict in lzma_attribute((__unused__)),
+		size_t *restrict in_pos lzma_attribute((__unused__)),
+		size_t in_size lzma_attribute((__unused__)),
 		uint8_t *restrict out, size_t *restrict out_pos,
-		size_t out_size, lzma_action action lzma_attribute((unused)))
+		size_t out_size,
+		lzma_action action lzma_attribute((__unused__)))
 {
 	// Position where to start calculating CRC32. The idea is that we
 	// need to call lzma_crc32() only once per call to index_encode().

src/liblzma/common/outqueue.c

@@ -1,180 +0,0 @@
-///////////////////////////////////////////////////////////////////////////////
-//
-/// \file       outqueue.c
-/// \brief      Output queue handling in multithreaded coding
-//
-//  Author:     Lasse Collin
-//
-//  This file has been put into the public domain.
-//  You can do whatever you want with this file.
-//
-///////////////////////////////////////////////////////////////////////////////
-
-#include "outqueue.h"
-
-
-/// This is to ease integer overflow checking: We may allocate up to
-/// 2 * LZMA_THREADS_MAX buffers and we need some extra memory for other
-/// data structures (that's the second /2).
-#define BUF_SIZE_MAX (UINT64_MAX / LZMA_THREADS_MAX / 2 / 2)
-
-
-static lzma_ret
-get_options(uint64_t *bufs_alloc_size, uint32_t *bufs_count,
-		uint64_t buf_size_max, uint32_t threads)
-{
-	if (threads > LZMA_THREADS_MAX || buf_size_max > BUF_SIZE_MAX)
-		return LZMA_OPTIONS_ERROR;
-
-	// The number of buffers is twice the number of threads.
-	// This wastes RAM but keeps the threads busy when buffers
-	// finish out of order.
-	//
-	// NOTE: If this is changed, update BUF_SIZE_MAX too.
-	*bufs_count = threads * 2;
-	*bufs_alloc_size = *bufs_count * buf_size_max;
-
-	return LZMA_OK;
-}
-
-
-extern uint64_t
-lzma_outq_memusage(uint64_t buf_size_max, uint32_t threads)
-{
-	uint64_t bufs_alloc_size;
-	uint32_t bufs_count;
-
-	if (get_options(&bufs_alloc_size, &bufs_count, buf_size_max, threads)
-			!= LZMA_OK)
-		return UINT64_MAX;
-
-	return sizeof(lzma_outq) + bufs_count * sizeof(lzma_outbuf)
-			+ bufs_alloc_size;
-}
-
-
-extern lzma_ret
-lzma_outq_init(lzma_outq *outq, lzma_allocator *allocator,
-		uint64_t buf_size_max, uint32_t threads)
-{
-	uint64_t bufs_alloc_size;
-	uint32_t bufs_count;
-
-	// Set bufs_count and bufs_alloc_size.
-	return_if_error(get_options(&bufs_alloc_size, &bufs_count,
-			buf_size_max, threads));
-
-	// Allocate memory if needed.
-	if (outq->buf_size_max != buf_size_max
-			|| outq->bufs_allocated != bufs_count) {
-		lzma_outq_end(outq, allocator);
-
-#if SIZE_MAX < UINT64_MAX
-		if (bufs_alloc_size > SIZE_MAX)
-			return LZMA_MEM_ERROR;
-#endif
-
-		outq->bufs = lzma_alloc(bufs_count * sizeof(lzma_outbuf),
-				allocator);
-		outq->bufs_mem = lzma_alloc((size_t)(bufs_alloc_size),
-				allocator);
-
-		if (outq->bufs == NULL || outq->bufs_mem == NULL) {
-			lzma_outq_end(outq, allocator);
-			return LZMA_MEM_ERROR;
-		}
-	}
-
-	// Initialize the rest of the main structure. Initialization of
-	// outq->bufs[] is done when they are actually needed.
-	outq->buf_size_max = (size_t)(buf_size_max);
-	outq->bufs_allocated = bufs_count;
-	outq->bufs_pos = 0;
-	outq->bufs_used = 0;
-	outq->read_pos = 0;
-
-	return LZMA_OK;
-}
-
-
-extern void
-lzma_outq_end(lzma_outq *outq, lzma_allocator *allocator)
-{
-	lzma_free(outq->bufs, allocator);
-	lzma_free(outq->bufs_mem, allocator);
-	return;
-}
-
-
-extern lzma_outbuf *
-lzma_outq_get_buf(lzma_outq *outq)
-{
-	// Caller must have checked it with lzma_outq_has_buf().
-	assert(outq->bufs_used < outq->bufs_allocated);
-
-	// Initialize the new buffer.
-	lzma_outbuf *buf = &outq->bufs[outq->bufs_pos];
-	buf->buf = outq->bufs_mem + outq->bufs_pos * outq->buf_size_max;
-	buf->size = 0;
-	buf->finished = false;
-
-	// Update the queue state.
-	if (++outq->bufs_pos == outq->bufs_allocated)
-		outq->bufs_pos = 0;
-
-	++outq->bufs_used;
-
-	return buf;
-}
-
-
-extern bool
-lzma_outq_is_readable(const lzma_outq *outq)
-{
-	uint32_t i = outq->bufs_pos - outq->bufs_used;
-	if (outq->bufs_pos < outq->bufs_used)
-		i += outq->bufs_allocated;
-
-	return outq->bufs[i].finished;
-}
-
-
-extern lzma_ret
-lzma_outq_read(lzma_outq *restrict outq, uint8_t *restrict out,
-		size_t *restrict out_pos, size_t out_size,
-		lzma_vli *restrict unpadded_size,
-		lzma_vli *restrict uncompressed_size)
-{
-	// There must be at least one buffer from which to read.
-	if (outq->bufs_used == 0)
-		return LZMA_OK;
-
-	// Get the buffer.
-	uint32_t i = outq->bufs_pos - outq->bufs_used;
-	if (outq->bufs_pos < outq->bufs_used)
-		i += outq->bufs_allocated;
-
-	lzma_outbuf *buf = &outq->bufs[i];
-
-	// If it isn't finished yet, we cannot read from it.
-	if (!buf->finished)
-		return LZMA_OK;
-
-	// Copy from the buffer to output.
-	lzma_bufcpy(buf->buf, &outq->read_pos, buf->size,
-			out, out_pos, out_size);
-
-	// Return if we didn't get all the data from the buffer.
-	if (outq->read_pos < buf->size)
-		return LZMA_OK;
-
-	// The buffer was finished. Tell the caller its size information.
-	*unpadded_size = buf->unpadded_size;
-	*uncompressed_size = buf->uncompressed_size;
-
-	// Free this buffer for further use.
-	--outq->bufs_used;
-	outq->read_pos = 0;
-
-	return LZMA_STREAM_END;
-}

src/liblzma/common/outqueue.h

@@ -1,155 +0,0 @@
-///////////////////////////////////////////////////////////////////////////////
-//
-/// \file       outqueue.h
-/// \brief      Output queue handling in multithreaded coding
-//
-//  Author:     Lasse Collin
-//
-//  This file has been put into the public domain.
-//  You can do whatever you want with this file.
-//
-///////////////////////////////////////////////////////////////////////////////
-
-#include "common.h"
-
-
-/// Output buffer for a single thread
-typedef struct {
-	/// Pointer to the output buffer of lzma_outq.buf_size_max bytes
-	uint8_t *buf;
-
-	/// Amount of data written to buf
-	size_t size;
-
-	/// Additional size information
-	lzma_vli unpadded_size;
-	lzma_vli uncompressed_size;
-
-	/// True when no more data will be written into this buffer.
-	///
-	/// \note       This is read by another thread and thus access
-	///             to this variable needs a mutex.
-	bool finished;
-
-} lzma_outbuf;
-
-
-typedef struct {
-	/// Array of buffers that are used cyclically.
-	lzma_outbuf *bufs;
-
-	/// Memory allocated for all the buffers
-	uint8_t *bufs_mem;
-
-	/// Amount of buffer space available in each buffer
-	size_t buf_size_max;
-
-	/// Number of buffers allocated
-	uint32_t bufs_allocated;
-
-	/// Position in the bufs array. The next buffer to be taken
-	/// into use is bufs[bufs_pos].
-	uint32_t bufs_pos;
-
-	/// Number of buffers in use
-	uint32_t bufs_used;
-
-	/// Position in the buffer in lzma_outq_read()
-	size_t read_pos;
-
-} lzma_outq;
-
-
-/**
- * \brief       Calculate the memory usage of an output queue
- *
- * \return      Approximate memory usage in bytes or UINT64_MAX on error.
- */
-extern uint64_t lzma_outq_memusage(uint64_t buf_size_max, uint32_t threads);
-
-
-/// \brief      Initialize an output queue
-///
-/// \param      outq            Pointer to an output queue. Before calling
-///                             this function the first time, *outq should
-///                             have been zeroed with memzero() so that this
-///                             function knows that there are no previous
-///                             allocations to free.
-/// \param      allocator       Pointer to allocator or NULL
-/// \param      buf_size_max    Maximum amount of data that a single buffer
-///                             in the queue may need to store.
-/// \param      threads         Number of buffers that may be in use
-///                             concurrently. Note that more than this number
-///                             of buffers will actually get allocated to
-///                             improve performance when buffers finish
-///                             out of order.
-///
-/// \return     - LZMA_OK
-///             - LZMA_MEM_ERROR
-///
-extern lzma_ret lzma_outq_init(lzma_outq *outq, lzma_allocator *allocator,
-		uint64_t buf_size_max, uint32_t threads);
-
-
-/// \brief      Free the memory associated with the output queue
-extern void lzma_outq_end(lzma_outq *outq, lzma_allocator *allocator);
-
-
-/// \brief      Get a new buffer
-///
-/// lzma_outq_has_buf() must be used to check that there is a buffer
-/// available before calling lzma_outq_get_buf().
-///
-extern lzma_outbuf *lzma_outq_get_buf(lzma_outq *outq);
-
-
-/// \brief      Test if there is data ready to be read
-///
-/// Call to this function must be protected with the same mutex that
-/// is used to protect lzma_outbuf.finished.
-///
-extern bool lzma_outq_is_readable(const lzma_outq *outq);
-
-
-/// \brief      Read finished data
-///
-/// \param      outq            Pointer to an output queue
-/// \param      out             Beginning of the output buffer
-/// \param      out_pos         The next byte will be written to
-///                             out[*out_pos].
-/// \param      out_size        Size of the out buffer; the first byte into
-///                             which no data is written to is out[out_size].
-/// \param      unpadded_size   Unpadded Size from the Block encoder
-/// \param      uncompressed_size Uncompressed Size from the Block encoder
-///
-/// \return     - LZMA: All OK. Either no data was available or the buffer
-///               being read didn't become empty yet.
-///             - LZMA_STREAM_END: The buffer being read was finished.
-///               *unpadded_size and *uncompressed_size were set.
-///
-/// \note       This reads lzma_outbuf.finished variables and thus call
-///             to this function needs to be protected with a mutex.
-///
-extern lzma_ret lzma_outq_read(lzma_outq *restrict outq,
-		uint8_t *restrict out, size_t *restrict out_pos,
-		size_t out_size, lzma_vli *restrict unpadded_size,
-		lzma_vli *restrict uncompressed_size);
-
-
-/// \brief      Test if there is at least one buffer free
-///
-/// This must be used before getting a new buffer with lzma_outq_get_buf().
-///
-static inline bool
-lzma_outq_has_buf(const lzma_outq *outq)
-{
-	return outq->bufs_used < outq->bufs_allocated;
-}
-
-
-/// \brief      Test if the queue is completely empty
-static inline bool
-lzma_outq_is_empty(const lzma_outq *outq)
-{
-	return outq->bufs_used == 0;
-}

src/liblzma/common/stream_encoder.c

@@ -10,6 +10,7 @@
 //
 ///////////////////////////////////////////////////////////////////////////////
 
+#include "stream_encoder.h"
 #include "block_encoder.h"
 #include "index_encoder.h"
 
@@ -25,7 +26,7 @@ struct lzma_coder_s {
 	} sequence;
 
 	/// True if Block encoder has been initialized by
-	/// stream_encoder_init() or stream_encoder_update()
+	/// lzma_stream_encoder_init() or stream_encoder_update()
 	/// and thus doesn't need to be initialized in stream_encode().
 	bool block_encoder_is_initialized;
 
@@ -125,7 +126,7 @@ stream_encode(lzma_coder *coder, lzma_allocator *allocator,
 		}
 
 		// Initialize the Block encoder unless it was already
-		// initialized by stream_encoder_init() or
+		// initialized by lzma_stream_encoder_init() or
 		// stream_encoder_update().
 		if (!coder->block_encoder_is_initialized)
 			return_if_error(block_encoder_init(coder, allocator));
@@ -261,11 +262,11 @@ stream_encoder_update(lzma_coder *coder, lzma_allocator *allocator,
 }
 
 
-static lzma_ret
-stream_encoder_init(lzma_next_coder *next, lzma_allocator *allocator,
+extern lzma_ret
+lzma_stream_encoder_init(lzma_next_coder *next, lzma_allocator *allocator,
 		const lzma_filter *filters, lzma_check check)
 {
-	lzma_next_coder_init(&stream_encoder_init, next, allocator);
+	lzma_next_coder_init(&lzma_stream_encoder_init, next, allocator);
 
 	if (filters == NULL)
 		return LZMA_PROG_ERROR;
@@ -319,7 +320,7 @@ extern LZMA_API(lzma_ret)
 lzma_stream_encoder(lzma_stream *strm,
 		const lzma_filter *filters, lzma_check check)
 {
-	lzma_next_strm_init(stream_encoder_init, strm, filters, check);
+	lzma_next_strm_init(lzma_stream_encoder_init, strm, filters, check);
 
 	strm->internal->supported_actions[LZMA_RUN] = true;
 	strm->internal->supported_actions[LZMA_SYNC_FLUSH] = true;

src/liblzma/common/stream_encoder.h

@@ -0,0 +1,23 @@
+///////////////////////////////////////////////////////////////////////////////
+//
+/// \file       stream_encoder.h
+/// \brief      Encodes .xz Streams
+//
+//  Author:     Lasse Collin
+//
+//  This file has been put into the public domain.
+//  You can do whatever you want with this file.
+//
+///////////////////////////////////////////////////////////////////////////////
+
+#ifndef LZMA_STREAM_ENCODER_H
+#define LZMA_STREAM_ENCODER_H
+
+#include "common.h"
+
+
+extern lzma_ret lzma_stream_encoder_init(
+		lzma_next_coder *next, lzma_allocator *allocator,
+		const lzma_filter *filters, lzma_check check);
+
+#endif

src/liblzma/delta/delta_encoder.c

@@ -85,7 +85,7 @@ delta_encode(lzma_coder *coder, lzma_allocator *allocator,
 
 static lzma_ret
 delta_encoder_update(lzma_coder *coder, lzma_allocator *allocator,
-		const lzma_filter *filters_null lzma_attribute((unused)),
+		const lzma_filter *filters_null lzma_attribute((__unused__)),
 		const lzma_filter *reversed_filters)
 {
 	// Delta doesn't and will never support changing the options in

src/liblzma/lz/lz_decoder.c

@@ -126,7 +126,7 @@ decode_buffer(lzma_coder *coder,
 
 static lzma_ret
 lz_decode(lzma_coder *coder,
-		lzma_allocator *allocator lzma_attribute((unused)),
+		lzma_allocator *allocator lzma_attribute((__unused__)),
 		const uint8_t *restrict in, size_t *restrict in_pos,
 		size_t in_size, uint8_t *restrict out,
 		size_t *restrict out_pos, size_t out_size,

src/liblzma/lz/lz_encoder.c

@@ -480,7 +480,7 @@ lz_encoder_end(lzma_coder *coder, lzma_allocator *allocator)
 
 static lzma_ret
 lz_encoder_update(lzma_coder *coder, lzma_allocator *allocator,
-		const lzma_filter *filters_null lzma_attribute((unused)),
+		const lzma_filter *filters_null lzma_attribute((__unused__)),
 		const lzma_filter *reversed_filters)
 {
 	if (coder->lz.options_update == NULL)

src/liblzma/lzma/fastpos.h

@@ -14,15 +14,15 @@
 #ifndef LZMA_FASTPOS_H
 #define LZMA_FASTPOS_H
 
-// LZMA encodes match distances by storing the highest two bits using
-// a six-bit value [0, 63], and then the missing lower bits.
-// Dictionary size is also stored using this encoding in the .xz
+// LZMA encodes match distances (positions) by storing the highest two
+// bits using a six-bit value [0, 63], and then the missing lower bits.
+// Dictionary size is also stored using this encoding in the new .lzma
 // file format header.
 //
 // fastpos.h provides a way to quickly find out the correct six-bit
 // values. The following table gives some examples of this encoding:
 //
-//     dist   return
+//      pos   return
 //       0       0
 //       1       1
 //       2       2
@@ -48,10 +48,10 @@
 // Provided functions or macros
 // ----------------------------
 //
-// get_dist_slot(dist) is the basic version. get_dist_slot_2(dist)
-// assumes that dist >= FULL_DISTANCES, thus the result is at least
-// FULL_DISTANCES_BITS * 2. Using get_dist_slot(dist) instead of
-// get_dist_slot_2(dist) would give the same result, but get_dist_slot_2(dist)
+// get_pos_slot(pos) is the basic version. get_pos_slot_2(pos)
+// assumes that pos >= FULL_DISTANCES, thus the result is at least
+// FULL_DISTANCES_BITS * 2. Using get_pos_slot(pos) instead of
+// get_pos_slot_2(pos) would give the same result, but get_pos_slot_2(pos)
 // should be tiny bit faster due to the assumption being made.
 //
 //
@@ -76,14 +76,13 @@
 // slightly faster, but sometimes it is a lot slower.
 
 #ifdef HAVE_SMALL
-#	define get_dist_slot(dist) \
-		((dist) <= 4 ? (dist) : get_dist_slot_2(dist))
+#	define get_pos_slot(pos) ((pos) <= 4 ? (pos) : get_pos_slot_2(pos))
 
 static inline uint32_t
-get_dist_slot_2(uint32_t dist)
+get_pos_slot_2(uint32_t pos)
 {
-	const uint32_t i = bsr32(dist);
-	return (i + i) + ((dist >> (i - 1)) & 1);
+	const uint32_t i = bsr32(pos);
+	return (i + i) + ((pos >> (i - 1)) & 1);
 }
 
 
@@ -100,39 +99,39 @@ extern const uint8_t lzma_fastpos[1 << FASTPOS_BITS];
 #define fastpos_limit(extra, n) \
 	(UINT32_C(1) << (FASTPOS_BITS + fastpos_shift(extra, n)))
 
-#define fastpos_result(dist, extra, n) \
-	lzma_fastpos[(dist) >> fastpos_shift(extra, n)] \
+#define fastpos_result(pos, extra, n) \
+	lzma_fastpos[(pos) >> fastpos_shift(extra, n)] \
 			+ 2 * fastpos_shift(extra, n)
 
 
 static inline uint32_t
-get_dist_slot(uint32_t dist)
+get_pos_slot(uint32_t pos)
 {
 	// If it is small enough, we can pick the result directly from
 	// the precalculated table.
-	if (dist < fastpos_limit(0, 0))
-		return lzma_fastpos[dist];
+	if (pos < fastpos_limit(0, 0))
+		return lzma_fastpos[pos];
 
-	if (dist < fastpos_limit(0, 1))
-		return fastpos_result(dist, 0, 1);
+	if (pos < fastpos_limit(0, 1))
+		return fastpos_result(pos, 0, 1);
 
-	return fastpos_result(dist, 0, 2);
+	return fastpos_result(pos, 0, 2);
 }
 
 
 #ifdef FULL_DISTANCES_BITS
 static inline uint32_t
-get_dist_slot_2(uint32_t dist)
+get_pos_slot_2(uint32_t pos)
 {
-	assert(dist >= FULL_DISTANCES);
+	assert(pos >= FULL_DISTANCES);
 
-	if (dist < fastpos_limit(FULL_DISTANCES_BITS - 1, 0))
-		return fastpos_result(dist, FULL_DISTANCES_BITS - 1, 0);
+	if (pos < fastpos_limit(FULL_DISTANCES_BITS - 1, 0))
+		return fastpos_result(pos, FULL_DISTANCES_BITS - 1, 0);
 
-	if (dist < fastpos_limit(FULL_DISTANCES_BITS - 1, 1))
-		return fastpos_result(dist, FULL_DISTANCES_BITS - 1, 1);
+	if (pos < fastpos_limit(FULL_DISTANCES_BITS - 1, 1))
+		return fastpos_result(pos, FULL_DISTANCES_BITS - 1, 1);
 
-	return fastpos_result(dist, FULL_DISTANCES_BITS - 1, 2);
+	return fastpos_result(pos, FULL_DISTANCES_BITS - 1, 2);
 }
 #endif
 

src/liblzma/lzma/lzma2_encoder.c

@@ -387,17 +387,7 @@ lzma_lzma2_props_encode(const void *options, uint8_t *out)
 	if (d == UINT32_MAX)
 		out[0] = 40;
 	else
-		out[0] = get_dist_slot(d + 1) - 24;
+		out[0] = get_pos_slot(d + 1) - 24;
 
 	return LZMA_OK;
 }
-
-
-extern uint64_t
-lzma_lzma2_block_size(const void *options)
-{
-	const lzma_options_lzma *const opt = options;
-
-	// Use at least 1 MiB to keep compression ratio better.
-	return my_max((uint64_t)(opt->dict_size) * 3, UINT64_C(1) << 20);
-}

src/liblzma/lzma/lzma2_encoder.h

@@ -38,6 +38,4 @@ extern uint64_t lzma_lzma2_encoder_memusage(const void *options);
 
 extern lzma_ret lzma_lzma2_props_encode(const void *options, uint8_t *out);
 
-extern uint64_t lzma_lzma2_block_size(const void *options);
-
 #endif

src/liblzma/lzma/lzma_common.h

@@ -171,54 +171,53 @@ literal_init(probability (*probs)[LITERAL_CODER_SIZE],
 // Match distance //
 ////////////////////
 
-// Different sets of probabilities are used for match distances that have very
+// Different set of probabilities is used for match distances that have very
 // short match length: Lengths of 2, 3, and 4 bytes have a separate set of
 // probabilities for each length. The matches with longer length use a shared
 // set of probabilities.
-#define DIST_STATES 4
+#define LEN_TO_POS_STATES 4
 
 // Macro to get the index of the appropriate probability array.
-#define get_dist_state(len) \
-	((len) < DIST_STATES + MATCH_LEN_MIN \
+#define get_len_to_pos_state(len) \
+	((len) < LEN_TO_POS_STATES + MATCH_LEN_MIN \
 		? (len) - MATCH_LEN_MIN \
-		: DIST_STATES - 1)
+		: LEN_TO_POS_STATES - 1)
 
-// The highest two bits of a match distance (distance slot) are encoded
-// using six bits. See fastpos.h for more explanation.
-#define DIST_SLOT_BITS 6
-#define DIST_SLOTS (1 << DIST_SLOT_BITS)
+// The highest two bits of a match distance (pos slot) are encoded using six
+// bits. See fastpos.h for more explanation.
+#define POS_SLOT_BITS 6
+#define POS_SLOTS (1 << POS_SLOT_BITS)
 
 // Match distances up to 127 are fully encoded using probabilities. Since
-// the highest two bits (distance slot) are always encoded using six bits,
-// the distances 0-3 don't need any additional bits to encode, since the
-// distance slot itself is the same as the actual distance. DIST_MODEL_START
-// indicates the first distance slot where at least one additional bit is
-// needed.
-#define DIST_MODEL_START 4
+// the highest two bits (pos slot) are always encoded using six bits, the
+// distances 0-3 don't need any additional bits to encode, since the pos
+// slot itself is the same as the actual distance. START_POS_MODEL_INDEX
+// indicates the first pos slot where at least one additional bit is needed.
+#define START_POS_MODEL_INDEX 4
 
 // Match distances greater than 127 are encoded in three pieces:
-//   - distance slot: the highest two bits
+//   - pos slot: the highest two bits
 //   - direct bits: 2-26 bits below the highest two bits
 //   - alignment bits: four lowest bits
 //
 // Direct bits don't use any probabilities.
 //
-// The distance slot value of 14 is for distances 128-191 (see the table in
+// The pos slot value of 14 is for distances 128-191 (see the table in
 // fastpos.h to understand why).
-#define DIST_MODEL_END 14
+#define END_POS_MODEL_INDEX 14
 
-// Distance slots that indicate a distance <= 127.
-#define FULL_DISTANCES_BITS (DIST_MODEL_END / 2)
+// Pos slots that indicate a distance <= 127.
+#define FULL_DISTANCES_BITS (END_POS_MODEL_INDEX / 2)
 #define FULL_DISTANCES (1 << FULL_DISTANCES_BITS)
 
 // For match distances greater than 127, only the highest two bits and the
 // lowest four bits (alignment) is encoded using probabilities.
 #define ALIGN_BITS 4
-#define ALIGN_SIZE (1 << ALIGN_BITS)
-#define ALIGN_MASK (ALIGN_SIZE - 1)
+#define ALIGN_TABLE_SIZE (1 << ALIGN_BITS)
+#define ALIGN_MASK (ALIGN_TABLE_SIZE - 1)
 
 // LZMA remembers the four most recent match distances. Reusing these distances
 // tends to take less space than re-encoding the actual distance value.
-#define REPS 4
+#define REP_DISTANCES 4
 
 #endif

src/liblzma/lzma/lzma_decoder.c

@@ -193,15 +193,15 @@ struct lzma_coder_s {
 	/// Probability tree for the highest two bits of the match distance.
 	/// There is a separate probability tree for match lengths of
 	/// 2 (i.e. MATCH_LEN_MIN), 3, 4, and [5, 273].
-	probability dist_slot[DIST_STATES][DIST_SLOTS];
+	probability pos_slot[LEN_TO_POS_STATES][POS_SLOTS];
 
 	/// Probability trees for additional bits for match distance when the
 	/// distance is in the range [4, 127].
-	probability pos_special[FULL_DISTANCES - DIST_MODEL_END];
+	probability pos_special[FULL_DISTANCES - END_POS_MODEL_INDEX];
 
 	/// Probability tree for the lowest four bits of a match distance
 	/// that is equal to or greater than 128.
-	probability pos_align[ALIGN_SIZE];
+	probability pos_align[ALIGN_TABLE_SIZE];
 
 	/// Length of a normal match
 	lzma_length_decoder match_len_decoder;
@@ -245,8 +245,8 @@ struct lzma_coder_s {
 		SEQ_LITERAL_WRITE,
 		SEQ_IS_REP,
 		seq_len(SEQ_MATCH_LEN),
-		seq_6(SEQ_DIST_SLOT),
-		SEQ_DIST_MODEL,
+		seq_6(SEQ_POS_SLOT),
+		SEQ_POS_MODEL,
 		SEQ_DIRECT,
 		seq_4(SEQ_ALIGN),
 		SEQ_EOPM,
@@ -502,28 +502,28 @@ lzma_decode(lzma_coder *restrict coder, lzma_dict *restrict dictptr,
 
 			// Prepare to decode the highest two bits of the
 			// match distance.
-			probs = coder->dist_slot[get_dist_state(len)];
+			probs = coder->pos_slot[get_len_to_pos_state(len)];
 			symbol = 1;
 
 #ifdef HAVE_SMALL
-	case SEQ_DIST_SLOT:
+	case SEQ_POS_SLOT:
 			do {
-				rc_bit(probs[symbol], , , SEQ_DIST_SLOT);
-			} while (symbol < DIST_SLOTS);
+				rc_bit(probs[symbol], , , SEQ_POS_SLOT);
+			} while (symbol < POS_SLOTS);
 #else
-			rc_bit_case(probs[symbol], , , SEQ_DIST_SLOT0);
-			rc_bit_case(probs[symbol], , , SEQ_DIST_SLOT1);
-			rc_bit_case(probs[symbol], , , SEQ_DIST_SLOT2);
-			rc_bit_case(probs[symbol], , , SEQ_DIST_SLOT3);
-			rc_bit_case(probs[symbol], , , SEQ_DIST_SLOT4);
-			rc_bit_case(probs[symbol], , , SEQ_DIST_SLOT5);
+			rc_bit_case(probs[symbol], , , SEQ_POS_SLOT0);
+			rc_bit_case(probs[symbol], , , SEQ_POS_SLOT1);
+			rc_bit_case(probs[symbol], , , SEQ_POS_SLOT2);
+			rc_bit_case(probs[symbol], , , SEQ_POS_SLOT3);
+			rc_bit_case(probs[symbol], , , SEQ_POS_SLOT4);
+			rc_bit_case(probs[symbol], , , SEQ_POS_SLOT5);
 #endif
 			// Get rid of the highest bit that was needed for
 			// indexing of the probability array.
-			symbol -= DIST_SLOTS;
+			symbol -= POS_SLOTS;
 			assert(symbol <= 63);
 
-			if (symbol < DIST_MODEL_START) {
+			if (symbol < START_POS_MODEL_INDEX) {
 				// Match distances [0, 3] have only two bits.
 				rep0 = symbol;
 			} else {
@@ -533,7 +533,7 @@ lzma_decode(lzma_coder *restrict coder, lzma_dict *restrict dictptr,
 				assert(limit >= 1 && limit <= 30);
 				rep0 = 2 + (symbol & 1);
 
-				if (symbol < DIST_MODEL_END) {
+				if (symbol < END_POS_MODEL_INDEX) {
 					// Prepare to decode the low bits for
 					// a distance of [4, 127].
 					assert(limit <= 5);
@@ -553,12 +553,12 @@ lzma_decode(lzma_coder *restrict coder, lzma_dict *restrict dictptr,
 							- symbol - 1;
 					symbol = 1;
 					offset = 0;
-	case SEQ_DIST_MODEL:
+	case SEQ_POS_MODEL:
 #ifdef HAVE_SMALL
 					do {
 						rc_bit(probs[symbol], ,
 							rep0 += 1 << offset,
-							SEQ_DIST_MODEL);
+							SEQ_POS_MODEL);
 					} while (++offset < limit);
 #else
 					switch (limit) {
@@ -566,25 +566,25 @@ lzma_decode(lzma_coder *restrict coder, lzma_dict *restrict dictptr,
 						assert(offset == 0);
 						rc_bit(probs[symbol], ,
 							rep0 += 1,
-							SEQ_DIST_MODEL);
+							SEQ_POS_MODEL);
 						++offset;
 						--limit;
 					case 4:
 						rc_bit(probs[symbol], ,
 							rep0 += 1 << offset,
-							SEQ_DIST_MODEL);
+							SEQ_POS_MODEL);
 						++offset;
 						--limit;
 					case 3:
 						rc_bit(probs[symbol], ,
 							rep0 += 1 << offset,
-							SEQ_DIST_MODEL);
+							SEQ_POS_MODEL);
 						++offset;
 						--limit;
 					case 2:
 						rc_bit(probs[symbol], ,
 							rep0 += 1 << offset,
-							SEQ_DIST_MODEL);
+							SEQ_POS_MODEL);
 						++offset;
 						--limit;
 					case 1:
@@ -596,7 +596,7 @@ lzma_decode(lzma_coder *restrict coder, lzma_dict *restrict dictptr,
 						// "symbol".
 						rc_bit_last(probs[symbol], ,
 							rep0 += 1 << offset,
-							SEQ_DIST_MODEL);
+							SEQ_POS_MODEL);
 					}
 #endif
 				} else {
@@ -637,7 +637,7 @@ lzma_decode(lzma_coder *restrict coder, lzma_dict *restrict dictptr,
 					rc_bit(coder->pos_align[symbol], ,
 							rep0 += 4, SEQ_ALIGN2);
 	case SEQ_ALIGN3:
-					// Like in SEQ_DIST_MODEL, we don't
+					// Like in SEQ_POS_MODEL, we don't
 					// need "symbol" for anything else
 					// than indexing the probability array.
 					rc_bit_last(coder->pos_align[symbol], ,
@@ -891,10 +891,10 @@ lzma_decoder_reset(lzma_coder *coder, const void *opt)
 		bit_reset(coder->is_rep2[i]);
 	}
 
-	for (uint32_t i = 0; i < DIST_STATES; ++i)
-		bittree_reset(coder->dist_slot[i], DIST_SLOT_BITS);
+	for (uint32_t i = 0; i < LEN_TO_POS_STATES; ++i)
+		bittree_reset(coder->pos_slot[i], POS_SLOT_BITS);
 
-	for (uint32_t i = 0; i < FULL_DISTANCES - DIST_MODEL_END; ++i)
+	for (uint32_t i = 0; i < FULL_DISTANCES - END_POS_MODEL_INDEX; ++i)
 		bit_reset(coder->pos_special[i]);
 
 	bittree_reset(coder->pos_align, ALIGN_BITS);

src/liblzma/lzma/lzma_encoder.c

@@ -148,28 +148,28 @@ match(lzma_coder *coder, const uint32_t pos_state,
 	length(&coder->rc, &coder->match_len_encoder, pos_state, len,
 			coder->fast_mode);
 
-	const uint32_t dist_slot = get_dist_slot(distance);
-	const uint32_t dist_state = get_dist_state(len);
-	rc_bittree(&coder->rc, coder->dist_slot[dist_state],
-			DIST_SLOT_BITS, dist_slot);
+	const uint32_t pos_slot = get_pos_slot(distance);
+	const uint32_t len_to_pos_state = get_len_to_pos_state(len);
+	rc_bittree(&coder->rc, coder->pos_slot[len_to_pos_state],
+			POS_SLOT_BITS, pos_slot);
 
-	if (dist_slot >= DIST_MODEL_START) {
-		const uint32_t footer_bits = (dist_slot >> 1) - 1;
-		const uint32_t base = (2 | (dist_slot & 1)) << footer_bits;
-		const uint32_t dist_reduced = distance - base;
+	if (pos_slot >= START_POS_MODEL_INDEX) {
+		const uint32_t footer_bits = (pos_slot >> 1) - 1;
+		const uint32_t base = (2 | (pos_slot & 1)) << footer_bits;
+		const uint32_t pos_reduced = distance - base;
 
-		if (dist_slot < DIST_MODEL_END) {
-			// Careful here: base - dist_slot - 1 can be -1, but
+		if (pos_slot < END_POS_MODEL_INDEX) {
+			// Careful here: base - pos_slot - 1 can be -1, but
 			// rc_bittree_reverse starts at probs[1], not probs[0].
 			rc_bittree_reverse(&coder->rc,
-				coder->dist_special + base - dist_slot - 1,
-				footer_bits, dist_reduced);
+				coder->pos_special + base - pos_slot - 1,
+				footer_bits, pos_reduced);
 		} else {
-			rc_direct(&coder->rc, dist_reduced >> ALIGN_BITS,
+			rc_direct(&coder->rc, pos_reduced >> ALIGN_BITS,
 					footer_bits - ALIGN_BITS);
 			rc_bittree_reverse(
-					&coder->rc, coder->dist_align,
-					ALIGN_BITS, dist_reduced & ALIGN_MASK);
+					&coder->rc, coder->pos_align,
+					ALIGN_BITS, pos_reduced & ALIGN_MASK);
 			++coder->align_price_count;
 		}
 	}
@@ -247,7 +247,7 @@ encode_symbol(lzma_coder *coder, lzma_mf *mf,
 		rc_bit(&coder->rc,
 			&coder->is_match[coder->state][pos_state], 1);
 
-		if (back < REPS) {
+		if (back < REP_DISTANCES) {
 			// It's a repeated match i.e. the same distance
 			// has been used earlier.
 			rc_bit(&coder->rc, &coder->is_rep[coder->state], 1);
@@ -255,7 +255,7 @@ encode_symbol(lzma_coder *coder, lzma_mf *mf,
 		} else {
 			// Normal match
 			rc_bit(&coder->rc, &coder->is_rep[coder->state], 0);
-			match(coder, pos_state, back - REPS, len);
+			match(coder, pos_state, back - REP_DISTANCES, len);
 		}
 	}
 
@@ -353,9 +353,9 @@ lzma_lzma_encode(lzma_coder *restrict coder, lzma_mf *restrict mf,
 
 		// Get optimal match (repeat position and length).
 		// Value ranges for pos:
-		//   - [0, REPS): repeated match
-		//   - [REPS, UINT32_MAX):
-		//     match at (pos - REPS)
+		//   - [0, REP_DISTANCES): repeated match
+		//   - [REP_DISTANCES, UINT32_MAX):
+		//     match at (pos - REP_DISTANCES)
 		//   - UINT32_MAX: not a match but a literal
 		// Value ranges for len:
 		//   - [MATCH_LEN_MIN, MATCH_LEN_MAX]
@@ -487,7 +487,7 @@ lzma_lzma_encoder_reset(lzma_coder *coder, const lzma_options_lzma *options)
 
 	// State
 	coder->state = STATE_LIT_LIT;
-	for (size_t i = 0; i < REPS; ++i)
+	for (size_t i = 0; i < REP_DISTANCES; ++i)
 		coder->reps[i] = 0;
 
 	literal_init(coder->literal, options->lc, options->lp);
@@ -505,14 +505,14 @@ lzma_lzma_encoder_reset(lzma_coder *coder, const lzma_options_lzma *options)
 		bit_reset(coder->is_rep2[i]);
 	}
 
-	for (size_t i = 0; i < FULL_DISTANCES - DIST_MODEL_END; ++i)
-		bit_reset(coder->dist_special[i]);
+	for (size_t i = 0; i < FULL_DISTANCES - END_POS_MODEL_INDEX; ++i)
+		bit_reset(coder->pos_special[i]);
 
 	// Bit tree encoders
-	for (size_t i = 0; i < DIST_STATES; ++i)
-		bittree_reset(coder->dist_slot[i], DIST_SLOT_BITS);
+	for (size_t i = 0; i < LEN_TO_POS_STATES; ++i)
+		bittree_reset(coder->pos_slot[i], POS_SLOT_BITS);
 
-	bittree_reset(coder->dist_align, ALIGN_BITS);
+	bittree_reset(coder->pos_align, ALIGN_BITS);
 
 	// Length encoders
 	length_encoder_reset(&coder->match_len_encoder,

src/liblzma/lzma/lzma_encoder_optimum_fast.c

@@ -46,7 +46,7 @@ lzma_lzma_optimum_fast(lzma_coder *restrict coder, lzma_mf *restrict mf,
 	uint32_t rep_len = 0;
 	uint32_t rep_index = 0;
 
-	for (uint32_t i = 0; i < REPS; ++i) {
+	for (uint32_t i = 0; i < REP_DISTANCES; ++i) {
 		// Pointer to the beginning of the match candidate
 		const uint8_t *const buf_back = buf - coder->reps[i] - 1;
 
@@ -79,7 +79,8 @@ lzma_lzma_optimum_fast(lzma_coder *restrict coder, lzma_mf *restrict mf,
 	// We didn't find a long enough repeated match. Encode it as a normal
 	// match if the match length is at least nice_len.
 	if (len_main >= nice_len) {
-		*back_res = coder->matches[matches_count - 1].dist + REPS;
+		*back_res = coder->matches[matches_count - 1].dist
+				+ REP_DISTANCES;
 		*len_res = len_main;
 		mf_skip(mf, len_main - 1);
 		return;
@@ -154,7 +155,7 @@ lzma_lzma_optimum_fast(lzma_coder *restrict coder, lzma_mf *restrict mf,
 
 	const uint32_t limit = len_main - 1;
 
-	for (uint32_t i = 0; i < REPS; ++i) {
+	for (uint32_t i = 0; i < REP_DISTANCES; ++i) {
 		const uint8_t *const buf_back = buf - coder->reps[i] - 1;
 
 		if (not_equal_16(buf, buf_back))
@@ -171,7 +172,7 @@ lzma_lzma_optimum_fast(lzma_coder *restrict coder, lzma_mf *restrict mf,
 		}
 	}
 
-	*back_res = back_main + REPS;
+	*back_res = back_main + REP_DISTANCES;
 	*len_res = len_main;
 	mf_skip(mf, len_main - 2);
 	return;

src/liblzma/lzma/lzma_encoder_optimum_normal.c

@@ -108,18 +108,18 @@ get_rep_price(const lzma_coder *const coder, const uint32_t rep_index,
 
 
 static inline uint32_t
-get_dist_len_price(const lzma_coder *const coder, const uint32_t dist,
+get_pos_len_price(const lzma_coder *const coder, const uint32_t pos,
 		const uint32_t len, const uint32_t pos_state)
 {
-	const uint32_t dist_state = get_dist_state(len);
+	const uint32_t len_to_pos_state = get_len_to_pos_state(len);
 	uint32_t price;
 
-	if (dist < FULL_DISTANCES) {
-		price = coder->dist_prices[dist_state][dist];
+	if (pos < FULL_DISTANCES) {
+		price = coder->distances_prices[len_to_pos_state][pos];
 	} else {
-		const uint32_t dist_slot = get_dist_slot_2(dist);
-		price = coder->dist_slot_prices[dist_state][dist_slot]
-				+ coder->align_prices[dist & ALIGN_MASK];
+		const uint32_t pos_slot = get_pos_slot_2(pos);
+		price = coder->pos_slot_prices[len_to_pos_state][pos_slot]
+				+ coder->align_prices[pos & ALIGN_MASK];
 	}
 
 	price += get_len_price(&coder->match_len_encoder, len, pos_state);
@@ -129,53 +129,55 @@ get_dist_len_price(const lzma_coder *const coder, const uint32_t dist,
 
 
 static void
-fill_dist_prices(lzma_coder *coder)
+fill_distances_prices(lzma_coder *coder)
 {
-	for (uint32_t dist_state = 0; dist_state < DIST_STATES; ++dist_state) {
+	for (uint32_t len_to_pos_state = 0;
+			len_to_pos_state < LEN_TO_POS_STATES;
+			++len_to_pos_state) {
 
-		uint32_t *const dist_slot_prices
-				= coder->dist_slot_prices[dist_state];
+		uint32_t *const pos_slot_prices
+				= coder->pos_slot_prices[len_to_pos_state];
 
-		// Price to encode the dist_slot.
-		for (uint32_t dist_slot = 0;
-				dist_slot < coder->dist_table_size; ++dist_slot)
-			dist_slot_prices[dist_slot] = rc_bittree_price(
-					coder->dist_slot[dist_state],
-					DIST_SLOT_BITS, dist_slot);
+		// Price to encode the pos_slot.
+		for (uint32_t pos_slot = 0;
+				pos_slot < coder->dist_table_size; ++pos_slot)
+			pos_slot_prices[pos_slot] = rc_bittree_price(
+					coder->pos_slot[len_to_pos_state],
+					POS_SLOT_BITS, pos_slot);
 
 		// For matches with distance >= FULL_DISTANCES, add the price
 		// of the direct bits part of the match distance. (Align bits
 		// are handled by fill_align_prices()).
-		for (uint32_t dist_slot = DIST_MODEL_END;
-				dist_slot < coder->dist_table_size;
-				++dist_slot)
-			dist_slot_prices[dist_slot] += rc_direct_price(
-					((dist_slot >> 1) - 1) - ALIGN_BITS);
+		for (uint32_t pos_slot = END_POS_MODEL_INDEX;
+				pos_slot < coder->dist_table_size; ++pos_slot)
+			pos_slot_prices[pos_slot] += rc_direct_price(
+					((pos_slot >> 1) - 1) - ALIGN_BITS);
 
 		// Distances in the range [0, 3] are fully encoded with
-		// dist_slot, so they are used for coder->dist_prices
+		// pos_slot, so they are used for coder->distances_prices
 		// as is.
-		for (uint32_t i = 0; i < DIST_MODEL_START; ++i)
-			coder->dist_prices[dist_state][i]
-					= dist_slot_prices[i];
+		for (uint32_t i = 0; i < START_POS_MODEL_INDEX; ++i)
+			coder->distances_prices[len_to_pos_state][i]
+					= pos_slot_prices[i];
 	}
 
-	// Distances in the range [4, 127] depend on dist_slot and
-	// dist_special. We do this in a loop separate from the above
-	// loop to avoid redundant calls to get_dist_slot().
-	for (uint32_t i = DIST_MODEL_START; i < FULL_DISTANCES; ++i) {
-		const uint32_t dist_slot = get_dist_slot(i);
-		const uint32_t footer_bits = ((dist_slot >> 1) - 1);
-		const uint32_t base = (2 | (dist_slot & 1)) << footer_bits;
+	// Distances in the range [4, 127] depend on pos_slot and pos_special.
+	// We do this in a loop separate from the above loop to avoid
+	// redundant calls to get_pos_slot().
+	for (uint32_t i = START_POS_MODEL_INDEX; i < FULL_DISTANCES; ++i) {
+		const uint32_t pos_slot = get_pos_slot(i);
+		const uint32_t footer_bits = ((pos_slot >> 1) - 1);
+		const uint32_t base = (2 | (pos_slot & 1)) << footer_bits;
 		const uint32_t price = rc_bittree_reverse_price(
-				coder->dist_special + base - dist_slot - 1,
+				coder->pos_special + base - pos_slot - 1,
 				footer_bits, i - base);
 
-		for (uint32_t dist_state = 0; dist_state < DIST_STATES;
-				++dist_state)
-			coder->dist_prices[dist_state][i]
-					= price + coder->dist_slot_prices[
-						dist_state][dist_slot];
+		for (uint32_t len_to_pos_state = 0;
+				len_to_pos_state < LEN_TO_POS_STATES;
+				++len_to_pos_state)
+			coder->distances_prices[len_to_pos_state][i]
+					= price + coder->pos_slot_prices[
+						len_to_pos_state][pos_slot];
 	}
 
 	coder->match_price_count = 0;
@@ -186,9 +188,9 @@ fill_dist_prices(lzma_coder *coder)
 static void
 fill_align_prices(lzma_coder *coder)
 {
-	for (uint32_t i = 0; i < ALIGN_SIZE; ++i)
+	for (uint32_t i = 0; i < ALIGN_TABLE_SIZE; ++i)
 		coder->align_prices[i] = rc_bittree_reverse_price(
-				coder->dist_align, ALIGN_BITS, i);
+				coder->pos_align, ALIGN_BITS, i);
 
 	coder->align_price_count = 0;
 	return;
@@ -294,10 +296,10 @@ helper1(lzma_coder *restrict coder, lzma_mf *restrict mf,
 
 	const uint8_t *const buf = mf_ptr(mf) - 1;
 
-	uint32_t rep_lens[REPS];
+	uint32_t rep_lens[REP_DISTANCES];
 	uint32_t rep_max_index = 0;
 
-	for (uint32_t i = 0; i < REPS; ++i) {
+	for (uint32_t i = 0; i < REP_DISTANCES; ++i) {
 		const uint8_t *const buf_back = buf - coder->reps[i] - 1;
 
 		if (not_equal_16(buf, buf_back)) {
@@ -324,7 +326,8 @@ helper1(lzma_coder *restrict coder, lzma_mf *restrict mf,
 
 
 	if (len_main >= nice_len) {
-		*back_res = coder->matches[matches_count - 1].dist + REPS;
+		*back_res = coder->matches[matches_count - 1].dist
+				+ REP_DISTANCES;
 		*len_res = len_main;
 		mf_skip(mf, len_main - 1);
 		return UINT32_MAX;
@@ -378,7 +381,7 @@ helper1(lzma_coder *restrict coder, lzma_mf *restrict mf,
 
 	coder->opts[1].pos_prev = 0;
 
-	for (uint32_t i = 0; i < REPS; ++i)
+	for (uint32_t i = 0; i < REP_DISTANCES; ++i)
 		coder->opts[0].backs[i] = coder->reps[i];
 
 	uint32_t len = len_end;
@@ -387,7 +390,7 @@ helper1(lzma_coder *restrict coder, lzma_mf *restrict mf,
 	} while (--len >= 2);
 
 
-	for (uint32_t i = 0; i < REPS; ++i) {
+	for (uint32_t i = 0; i < REP_DISTANCES; ++i) {
 		uint32_t rep_len = rep_lens[i];
 		if (rep_len < 2)
 			continue;
@@ -423,13 +426,14 @@ helper1(lzma_coder *restrict coder, lzma_mf *restrict mf,
 		for(; ; ++len) {
 			const uint32_t dist = coder->matches[i].dist;
 			const uint32_t cur_and_len_price = normal_match_price
-					+ get_dist_len_price(coder,
+					+ get_pos_len_price(coder,
 						dist, len, pos_state);
 
 			if (cur_and_len_price < coder->opts[len].price) {
 				coder->opts[len].price = cur_and_len_price;
 				coder->opts[len].pos_prev = 0;
-				coder->opts[len].back_prev = dist + REPS;
+				coder->opts[len].back_prev
+						= dist + REP_DISTANCES;
 				coder->opts[len].prev_1_is_literal = false;
 			}
 
@@ -459,7 +463,7 @@ helper2(lzma_coder *coder, uint32_t *reps, const uint8_t *buf,
 		if (coder->opts[cur].prev_2) {
 			state = coder->opts[coder->opts[cur].pos_prev_2].state;
 
-			if (coder->opts[cur].back_prev_2 < REPS)
+			if (coder->opts[cur].back_prev_2 < REP_DISTANCES)
 				update_long_rep(state);
 			else
 				update_match(state);
@@ -488,33 +492,33 @@ helper2(lzma_coder *coder, uint32_t *reps, const uint8_t *buf,
 			update_long_rep(state);
 		} else {
 			pos = coder->opts[cur].back_prev;
-			if (pos < REPS)
+			if (pos < REP_DISTANCES)
 				update_long_rep(state);
 			else
 				update_match(state);
 		}
 
-		if (pos < REPS) {
+		if (pos < REP_DISTANCES) {
 			reps[0] = coder->opts[pos_prev].backs[pos];
 
 			uint32_t i;
 			for (i = 1; i <= pos; ++i)
 				reps[i] = coder->opts[pos_prev].backs[i - 1];
 
-			for (; i < REPS; ++i)
+			for (; i < REP_DISTANCES; ++i)
 				reps[i] = coder->opts[pos_prev].backs[i];
 
 		} else {
-			reps[0] = pos - REPS;
+			reps[0] = pos - REP_DISTANCES;
 
-			for (uint32_t i = 1; i < REPS; ++i)
+			for (uint32_t i = 1; i < REP_DISTANCES; ++i)
 				reps[i] = coder->opts[pos_prev].backs[i - 1];
 		}
 	}
 
 	coder->opts[cur].state = state;
 
-	for (uint32_t i = 0; i < REPS; ++i)
+	for (uint32_t i = 0; i < REP_DISTANCES; ++i)
 		coder->opts[cur].backs[i] = reps[i];
 
 	const uint32_t cur_price = coder->opts[cur].price;
@@ -607,7 +611,7 @@ helper2(lzma_coder *coder, uint32_t *reps, const uint8_t *buf,
 
 	uint32_t start_len = 2; // speed optimization
 
-	for (uint32_t rep_index = 0; rep_index < REPS; ++rep_index) {
+	for (uint32_t rep_index = 0; rep_index < REP_DISTANCES; ++rep_index) {
 		const uint8_t *const buf_back = buf - reps[rep_index] - 1;
 		if (not_equal_16(buf, buf_back))
 			continue;
@@ -724,14 +728,14 @@ helper2(lzma_coder *coder, uint32_t *reps, const uint8_t *buf,
 		for (uint32_t len_test = start_len; ; ++len_test) {
 			const uint32_t cur_back = coder->matches[i].dist;
 			uint32_t cur_and_len_price = normal_match_price
-					+ get_dist_len_price(coder,
+					+ get_pos_len_price(coder,
 						cur_back, len_test, pos_state);
 
 			if (cur_and_len_price < coder->opts[cur + len_test].price) {
 				coder->opts[cur + len_test].price = cur_and_len_price;
 				coder->opts[cur + len_test].pos_prev = cur;
 				coder->opts[cur + len_test].back_prev
-						= cur_back + REPS;
+						= cur_back + REP_DISTANCES;
 				coder->opts[cur + len_test].prev_1_is_literal = false;
 			}
 
@@ -791,7 +795,7 @@ helper2(lzma_coder *coder, uint32_t *reps, const uint8_t *buf,
 						coder->opts[offset].prev_2 = true;
 						coder->opts[offset].pos_prev_2 = cur;
 						coder->opts[offset].back_prev_2
-								= cur_back + REPS;
+								= cur_back + REP_DISTANCES;
 					}
 					//}
 				}
@@ -827,9 +831,9 @@ lzma_lzma_optimum_normal(lzma_coder *restrict coder, lzma_mf *restrict mf,
 	// In liblzma they were moved into this single place.
 	if (mf->read_ahead == 0) {
 		if (coder->match_price_count >= (1 << 7))
-			fill_dist_prices(coder);
+			fill_distances_prices(coder);
 
-		if (coder->align_price_count >= ALIGN_SIZE)
+		if (coder->align_price_count >= ALIGN_TABLE_SIZE)
 			fill_align_prices(coder);
 	}
 
@@ -841,7 +845,7 @@ lzma_lzma_optimum_normal(lzma_coder *restrict coder, lzma_mf *restrict mf,
 	if (len_end == UINT32_MAX)
 		return;
 
-	uint32_t reps[REPS];
+	uint32_t reps[REP_DISTANCES];
 	memcpy(reps, coder->reps, sizeof(reps));
 
 	uint32_t cur;

src/liblzma/lzma/lzma_encoder_private.h

@@ -64,7 +64,7 @@ typedef struct {
 	uint32_t pos_prev;  // pos_next;
 	uint32_t back_prev;
 
-	uint32_t backs[REPS];
+	uint32_t backs[REP_DISTANCES];
 
 } lzma_optimal;
 
@@ -77,7 +77,7 @@ struct lzma_coder_s {
 	lzma_lzma_state state;
 
 	/// The four most recent match distances
-	uint32_t reps[REPS];
+	uint32_t reps[REP_DISTANCES];
 
 	/// Array of match candidates
 	lzma_match matches[MATCH_LEN_MAX + 1];
@@ -112,9 +112,9 @@ struct lzma_coder_s {
 	probability is_rep1[STATES];
 	probability is_rep2[STATES];
 	probability is_rep0_long[STATES][POS_STATES_MAX];
-	probability dist_slot[DIST_STATES][DIST_SLOTS];
-	probability dist_special[FULL_DISTANCES - DIST_MODEL_END];
-	probability dist_align[ALIGN_SIZE];
+	probability pos_slot[LEN_TO_POS_STATES][POS_SLOTS];
+	probability pos_special[FULL_DISTANCES - END_POS_MODEL_INDEX];
+	probability pos_align[ALIGN_TABLE_SIZE];
 
 	// These are the same as in lzma_decoder.c except that the encoders
 	// include also price tables.
@@ -122,12 +122,12 @@ struct lzma_coder_s {
 	lzma_length_encoder rep_len_encoder;
 
 	// Price tables
-	uint32_t dist_slot_prices[DIST_STATES][DIST_SLOTS];
-	uint32_t dist_prices[DIST_STATES][FULL_DISTANCES];
+	uint32_t pos_slot_prices[LEN_TO_POS_STATES][POS_SLOTS];
+	uint32_t distances_prices[LEN_TO_POS_STATES][FULL_DISTANCES];
 	uint32_t dist_table_size;
 	uint32_t match_price_count;
 
-	uint32_t align_prices[ALIGN_SIZE];
+	uint32_t align_prices[ALIGN_TABLE_SIZE];
 	uint32_t align_price_count;
 
 	// Optimal

src/liblzma/simple/arm.c

@@ -15,7 +15,7 @@
 
 
 static size_t
-arm_code(lzma_simple *simple lzma_attribute((unused)),
+arm_code(lzma_simple *simple lzma_attribute((__unused__)),
 		uint32_t now_pos, bool is_encoder,
 		uint8_t *buffer, size_t size)
 {

src/liblzma/simple/armthumb.c

@@ -15,7 +15,7 @@
 
 
 static size_t
-armthumb_code(lzma_simple *simple lzma_attribute((unused)),
+armthumb_code(lzma_simple *simple lzma_attribute((__unused__)),
 		uint32_t now_pos, bool is_encoder,
 		uint8_t *buffer, size_t size)
 {

src/liblzma/simple/ia64.c

@@ -15,7 +15,7 @@
 
 
 static size_t
-ia64_code(lzma_simple *simple lzma_attribute((unused)),
+ia64_code(lzma_simple *simple lzma_attribute((__unused__)),
 		uint32_t now_pos, bool is_encoder,
 		uint8_t *buffer, size_t size)
 {

src/liblzma/simple/powerpc.c

@@ -15,7 +15,7 @@
 
 
 static size_t
-powerpc_code(lzma_simple *simple lzma_attribute((unused)),
+powerpc_code(lzma_simple *simple lzma_attribute((__unused__)),
 		uint32_t now_pos, bool is_encoder,
 		uint8_t *buffer, size_t size)
 {

src/liblzma/simple/simple_coder.c

@@ -212,7 +212,7 @@ simple_coder_end(lzma_coder *coder, lzma_allocator *allocator)
 
 static lzma_ret
 simple_coder_update(lzma_coder *coder, lzma_allocator *allocator,
-		const lzma_filter *filters_null lzma_attribute((unused)),
+		const lzma_filter *filters_null lzma_attribute((__unused__)),
 		const lzma_filter *reversed_filters)
 {
 	// No update support, just call the next filter in the chain.

src/liblzma/simple/sparc.c

@@ -15,7 +15,7 @@
 
 
 static size_t
-sparc_code(lzma_simple *simple lzma_attribute((unused)),
+sparc_code(lzma_simple *simple lzma_attribute((__unused__)),
 		uint32_t now_pos, bool is_encoder,
 		uint8_t *buffer, size_t size)
 {

src/lzmainfo/lzmainfo.c

@@ -26,7 +26,7 @@
 #endif
 
 
-static void lzma_attribute((noreturn))
+static void lzma_attribute((__noreturn__))
 help(void)
 {
 	printf(
@@ -45,7 +45,7 @@ _("Usage: %s [--help] [--version] [FILE]...\n"
 }
 
 
-static void lzma_attribute((noreturn))
+static void lzma_attribute((__noreturn__))
 version(void)
 {
 	puts("lzmainfo (" PACKAGE_NAME ") " LZMA_VERSION_STRING);

src/scripts/xzdiff.1

@@ -6,7 +6,7 @@
 .\"
 .\" License: GNU GPLv2+
 .\"
-.TH XZDIFF 1 "2011-03-19" "Tukaani" "XZ Utils"
+.TH XZDIFF 1 "2010-09-27" "Tukaani" "XZ Utils"
 .SH NAME
 xzcmp, xzdiff, lzcmp, lzdiff \- compare compressed files
 .SH SYNOPSIS
@@ -33,9 +33,8 @@ on files compressed with
 .BR xz (1),
 .BR lzma (1),
 .BR gzip (1),
-.BR bzip2 (1),
 or
-.BR lzop (1).
+.BR bzip2 (1).
 All options specified are passed directly to
 .BR cmp (1)
 or
@@ -67,7 +66,6 @@ are provided for backward compatibility with LZMA Utils.
 .BR xz (1),
 .BR gzip (1),
 .BR bzip2 (1),
-.BR lzop (1),
 .BR zdiff (1)
 .SH BUGS
 Messages from the

src/scripts/xzdiff.in

@@ -19,10 +19,10 @@
 
 # Instead of unsetting XZ_OPT, just make sure that xz will use file format
 # autodetection. This way memory usage limit and thread limit can be
-# specified via XZ_OPT. With gzip, bzip2, and lzop it's OK to just unset the
+# specified via XZ_OPT. With gzip and bzip2 it's OK to just unset the
 # environment variables.
 xz='@xz@ --format=auto'
-unset GZIP BZIP BZIP2 LZOP
+unset GZIP BZIP BZIP2
 
 case ${0##*/} in
   *cmp*) prog=xzcmp; cmp=${CMP:-cmp};;
@@ -77,21 +77,17 @@ if test $# -eq 1; then
       xz1=bzip2;;
     *[-.][zZ] | *_z | *[-.]gz | *.t[ag]z)
       xz1=gzip;;
-    *[-.]lzo | *.tzo)
-      xz1=lzop;;
     *)
       echo >&2 "$0: $1: Unknown compressed file name suffix"
       exit 2;;
   esac
   case $1 in
-    *[-.][zZ] | *_z | *[-.][gx]z | *[-.]bz2 | *[-.]lzma | *[-.]lzo)
-      FILE=`expr "X$1" : 'X\(.*\)[-.][abglmoxzZ2]*$'`;;
+    *[-.][zZ] | *_z | *[-.][gx]z | *[-.]bz2 | *[-.]lzma)
+      FILE=`expr "X$1" : 'X\(.*\)[-.][abglmxzZ2]*$'`;;
     *.t[abglx]z)
       FILE=`expr "X$1" : 'X\(.*[-.]t\)[abglx]z$'`ar;;
     *.tbz2)
       FILE=`expr "X$1" : 'X\(.*[-.]t\)bz2$'`ar;;
-    *.tzo)
-      FILE=`expr "X$1" : 'X\(.*[-.]t\)zo$'`ar;;
   esac
   xz_status=$(
     exec 4>&1
@@ -101,17 +97,15 @@ elif test $# -eq 2; then
   case $1 in
     *[-.]bz2 | *.tbz | *.tbz2) xz1=bzip2;;
     *[-.][zZ] | *_z | *[-.]gz | *.t[ag]z) xz1=gzip;;
-    *[-.]lzo | *.tzo) xz1=lzop;;
   esac
   case $2 in
     *[-.]bz2 | *.tbz | *.tbz2) xz2=bzip2;;
     *[-.][zZ] | *_z | *[-.]gz | *.t[ag]z) xz2=gzip;;
-    *[-.]lzo | *.tzo) xz2=lzop;;
   esac
   case $1 in
-    *[-.][zZ] | *_z | *[-.][gx]z | *[-.]bz2 | *[-.]lzma | *.t[abglx]z | *.tbz2 | *[-.]lzo | *.tzo | -)
+    *[-.][zZ] | *_z | *[-.][gx]z | *[-.]bz2 | *[-.]lzma | *.t[abglx]z | *.tbz2 | -)
       case "$2" in
-        *[-.][zZ] | *_z | *[-.][gx]z | *[-.]bz2 | *[-.]lzma | *.t[abglx]z | *.tbz2 | *[-.]lzo | *.tzo | -)
+        *[-.][zZ] | *_z | *[-.][gx]z | *[-.]bz2 | *[-.]lzma | *.t[abglx]z | *.tbz2 | -)
           if test "$1$2" = --; then
             xz_status=$(
               exec 4>&1
@@ -131,7 +125,7 @@ elif test $# -eq 2; then
               *) xz_status=0;;
             esac
           else
-            F=`expr "/$2" : '.*/\(.*\)[-.][ablmotxz2]*$'` || F=$prog
+            F=`expr "/$2" : '.*/\(.*\)[-.][ablmtxz2]*$'` || F=$prog
             tmp=
             trap '
               test -n "$tmp" && rm -f "$tmp"
@@ -158,7 +152,7 @@ elif test $# -eq 2; then
     esac;;
   *)
     case "$2" in
-      *[-.][zZ] | *_z | *[-.][gx]z | *[-.]bz2 | *[-.]lzma | *.t[abglx]z | *.tbz2 | *[-.]lzo | *.tzo | -)
+      *[-.][zZ] | *_z | *[-.][gx]z | *[-.]bz2 | *[-.]lzma | *.t[abglx]z | *.tbz2 | -)
         xz_status=$(
           exec 4>&1
           ($xz2 -cdfq -- "$2" 4>&-; echo $? >&4) 3>&- |

src/scripts/xzgrep.1

@@ -6,7 +6,7 @@
 .\"
 .\" License: GNU GPLv2+
 .\"
-.TH XZGREP 1 "2011-03-19" "Tukaani" "XZ Utils"
+.TH XZGREP 1 "2010-09-27" "Tukaani" "XZ Utils"
 .SH NAME
 xzgrep \- search compressed files for a regular expression
 .SH SYNOPSIS
@@ -40,9 +40,8 @@ which may be either uncompressed or compressed with
 .BR xz (1),
 .BR lzma (1),
 .BR gzip (1),
-.BR bzip2 (1),
 or
-.BR lzop (1).
+.BR bzip2 (1).
 All options specified are passed directly to
 .BR grep (1).
 .PP
@@ -52,10 +51,9 @@ is specified, then standard input is decompressed if necessary
 and fed to
 .BR grep (1).
 When reading from standard input,
-.BR gzip (1),
-.BR bzip2 (1),
+.BR gzip (1)
 and
-.BR lzop (1)
+.BR bzip2 (1)
 compressed files are not supported.
 .PP
 If
@@ -94,5 +92,4 @@ or
 .BR xz (1),
 .BR gzip (1),
 .BR bzip2 (1),
-.BR lzop (1),
 .BR zgrep (1)

src/scripts/xzgrep.in

@@ -22,12 +22,12 @@
 
 # Instead of unsetting XZ_OPT, just make sure that xz will use file format
 # autodetection. This way memory usage limit and thread limit can be
-# specified via XZ_OPT. With gzip, bzip2, and lzop it's OK to just unset the
+# specified via XZ_OPT. With gzip and bzip2 it's OK to just unset the
 # environment variables.
 xz='@xz@ --format=auto'
-unset GZIP BZIP BZIP2 LZOP
+unset GZIP BZIP BZIP2
 
-case ${0##/*} in
+case ${0##*/} in
   *egrep*) prog=xzegrep; grep=${GREP:-egrep};;
   *fgrep*) prog=xzfgrep; grep=${GREP:-fgrep};;
   *)       prog=xzgrep; grep=${GREP:-grep};;
@@ -35,7 +35,7 @@ esac
 
 version="$prog (@PACKAGE_NAME@) @VERSION@"
 
-usage="Usage: ${0##/*} [OPTION]... [-e] PATTERN [FILE]...
+usage="Usage: ${0##*/} [OPTION]... [-e] PATTERN [FILE]...
 Look for instances of PATTERN in the input FILEs, using their
 uncompressed contents if they are compressed.
 
@@ -153,7 +153,6 @@ for i; do
   case $i in
     *[-.][zZ] | *_z | *[-.]gz | *.t[ag]z) uncompress="gzip -cdfq";;
     *[-.]bz2 | *[-.]tbz | *.tbz2) uncompress="bzip2 -cdfq";;
-    *[-.]lzo | *[-.]tzo) uncompress="lzop -cdfq";;
     *) uncompress="$xz -cdfq";;
   esac
   # Fail if xz or grep (or sed) fails.

src/xz/args.c

@@ -68,11 +68,9 @@ parse_real(args_info *args, int argc, char **argv)
 		OPT_LZMA1,
 		OPT_LZMA2,
 
-		OPT_SINGLE_STREAM,
 		OPT_NO_SPARSE,
 		OPT_FILES,
 		OPT_FILES0,
-		OPT_BLOCK_SIZE,
 		OPT_MEM_COMPRESS,
 		OPT_MEM_DECOMPRESS,
 		OPT_NO_ADJUST,
@@ -96,7 +94,6 @@ parse_real(args_info *args, int argc, char **argv)
 		{ "force",        no_argument,       NULL,  'f' },
 		{ "stdout",       no_argument,       NULL,  'c' },
 		{ "to-stdout",    no_argument,       NULL,  'c' },
-		{ "single-stream", no_argument,      NULL,  OPT_SINGLE_STREAM },
 		{ "no-sparse",    no_argument,       NULL,  OPT_NO_SPARSE },
 		{ "suffix",       required_argument, NULL,  'S' },
 		// { "recursive",      no_argument,       NULL,  'r' }, // TODO
@@ -106,7 +103,6 @@ parse_real(args_info *args, int argc, char **argv)
 		// Basic compression settings
 		{ "format",       required_argument, NULL,  'F' },
 		{ "check",        required_argument, NULL,  'C' },
-		{ "block-size",   required_argument, NULL,  OPT_BLOCK_SIZE },
 		{ "memlimit-compress",   required_argument, NULL, OPT_MEM_COMPRESS },
 		{ "memlimit-decompress", required_argument, NULL, OPT_MEM_DECOMPRESS },
 		{ "memlimit",     required_argument, NULL,  'M' },
@@ -179,9 +175,8 @@ parse_real(args_info *args, int argc, char **argv)
 			break;
 
 		case 'T':
-			// The max is from src/liblzma/common/common.h.
-			hardware_threads_set(str_to_uint64("threads",
-					optarg, 0, 16384));
+			hardware_threadlimit_set(str_to_uint64(
+					"threads", optarg, 0, UINT32_MAX));
 			break;
 
 		// --version
@@ -373,15 +368,6 @@ parse_real(args_info *args, int argc, char **argv)
 			break;
 		}
 
-		case OPT_BLOCK_SIZE:
-			opt_block_size = str_to_uint64("block-size", optarg,
-					0, LZMA_VLI_MAX);
-			break;
-
-		case OPT_SINGLE_STREAM:
-			opt_single_stream = true;
-			break;
-
 		case OPT_NO_SPARSE:
 			io_no_sparse();
 			break;

src/xz/coder.c

@@ -24,8 +24,6 @@ enum coder_init_ret {
 enum operation_mode opt_mode = MODE_COMPRESS;
 enum format_type opt_format = FORMAT_AUTO;
 bool opt_auto_adjust = true;
-bool opt_single_stream = false;
-uint64_t opt_block_size = 0;
 
 
 /// Stream used to communicate with liblzma
@@ -39,10 +37,10 @@ static io_buf in_buf;
 static io_buf out_buf;
 
 /// Number of filters. Zero indicates that we are using a preset.
-static uint32_t filters_count = 0;
+static size_t filters_count = 0;
 
 /// Number of the preset (0-9)
-static uint32_t preset_number = 6;
+static size_t preset_number = 6;
 
 /// If a preset is used (no custom filter chain) and preset_extreme is true,
 /// a significantly slower compression is used to achieve slightly better
@@ -55,14 +53,6 @@ static lzma_check check;
 /// This becomes false if the --check=CHECK option is used.
 static bool check_default = true;
 
-#ifdef HAVE_PTHREAD
-static lzma_mt mt_options = {
-	.flags = 0,
-	.timeout = 300,
-	.filters = filters,
-};
-#endif
-
 
 extern void
 coder_set_check(lzma_check new_check)
@@ -74,7 +64,7 @@ coder_set_check(lzma_check new_check)
 
 
 extern void
-coder_set_preset(uint32_t new_preset)
+coder_set_preset(size_t new_preset)
 {
 	preset_number = new_preset;
 
@@ -112,7 +102,7 @@ coder_add_filter(lzma_vli id, void *options)
 }
 
 
-static void lzma_attribute((noreturn))
+static void lzma_attribute((__noreturn__))
 memlimit_too_small(uint64_t memory_usage)
 {
 	message(V_ERROR, _("Memory usage limit is too low for the given "
@@ -125,15 +115,6 @@ memlimit_too_small(uint64_t memory_usage)
 extern void
 coder_set_compression_settings(void)
 {
-	// The default check type is CRC64, but fallback to CRC32
-	// if CRC64 isn't supported by the copy of liblzma we are
-	// using. CRC32 is always supported.
-	if (check_default) {
-		check = LZMA_CHECK_CRC64;
-		if (!lzma_check_is_supported(check))
-			check = LZMA_CHECK_CRC32;
-	}
-
 	// Options for LZMA1 or LZMA2 in case we are using a preset.
 	static lzma_options_lzma opt_lzma;
 
@@ -187,26 +168,15 @@ coder_set_compression_settings(void)
 	// Print the selected filter chain.
 	message_filters_show(V_DEBUG, filters);
 
-	// Get the memory usage. Note that if --format=raw was used,
-	// we can be decompressing.
+	// If using --format=raw, we can be decoding. The memusage function
+	// also validates the filter chain and the options used for the
+	// filters.
 	const uint64_t memory_limit = hardware_memlimit_get(opt_mode);
 	uint64_t memory_usage;
-	if (opt_mode == MODE_COMPRESS) {
-#ifdef HAVE_PTHREAD
-		if (opt_format == FORMAT_XZ && hardware_threads_get() > 1) {
-			mt_options.threads = hardware_threads_get();
-			mt_options.block_size = opt_block_size;
-			mt_options.check = check;
-			memory_usage = lzma_stream_encoder_mt_memusage(
-					&mt_options);
-		} else
-#endif
-		{
-			memory_usage = lzma_raw_encoder_memusage(filters);
-		}
-	} else {
+	if (opt_mode == MODE_COMPRESS)
+		memory_usage = lzma_raw_encoder_memusage(filters);
+	else
 		memory_usage = lzma_raw_decoder_memusage(filters);
-	}
 
 	if (memory_usage == UINT64_MAX)
 		message_fatal(_("Unsupported filter chain or filter options"));
@@ -222,99 +192,90 @@ coder_set_compression_settings(void)
 						round_up_to_mib(decmem), 0));
 	}
 
-	if (memory_usage <= memory_limit)
-		return;
+	if (memory_usage > memory_limit) {
+		// If --no-auto-adjust was used or we didn't find LZMA1 or
+		// LZMA2 as the last filter, give an error immediately.
+		// --format=raw implies --no-auto-adjust.
+		if (!opt_auto_adjust || opt_format == FORMAT_RAW)
+			memlimit_too_small(memory_usage);
 
-	// If --no-auto-adjust was used or we didn't find LZMA1 or
-	// LZMA2 as the last filter, give an error immediately.
-	// --format=raw implies --no-auto-adjust.
-	if (!opt_auto_adjust || opt_format == FORMAT_RAW)
-		memlimit_too_small(memory_usage);
+		assert(opt_mode == MODE_COMPRESS);
 
-	assert(opt_mode == MODE_COMPRESS);
-
-#ifdef HAVE_PTHREAD
-	if (opt_format == FORMAT_XZ && mt_options.threads > 1) {
-		// Try to reduce the number of threads before
-		// adjusting the compression settings down.
-		do {
-			// FIXME? The real single-threaded mode has
-			// lower memory usage, but it's not comparable
-			// because it doesn't write the size info
-			// into Block Headers.
-			if (--mt_options.threads == 0)
+		// Look for the last filter if it is LZMA2 or LZMA1, so
+		// we can make it use less RAM. With other filters we don't
+		// know what to do.
+		size_t i = 0;
+		while (filters[i].id != LZMA_FILTER_LZMA2
+				&& filters[i].id != LZMA_FILTER_LZMA1) {
+			if (filters[i].id == LZMA_VLI_UNKNOWN)
 				memlimit_too_small(memory_usage);
 
-			memory_usage = lzma_stream_encoder_mt_memusage(
-					&mt_options);
+			++i;
+		}
+
+		// Decrease the dictionary size until we meet the memory
+		// usage limit. First round down to full mebibytes.
+		lzma_options_lzma *opt = filters[i].options;
+		const uint32_t orig_dict_size = opt->dict_size;
+		opt->dict_size &= ~((UINT32_C(1) << 20) - 1);
+		while (true) {
+			// If it is below 1 MiB, auto-adjusting failed. We
+			// could be more sophisticated and scale it down even
+			// more, but let's see if many complain about this
+			// version.
+			//
+			// FIXME: Displays the scaled memory usage instead
+			// of the original.
+			if (opt->dict_size < (UINT32_C(1) << 20))
+				memlimit_too_small(memory_usage);
+
+			memory_usage = lzma_raw_encoder_memusage(filters);
 			if (memory_usage == UINT64_MAX)
 				message_bug();
 
-		} while (memory_usage > memory_limit);
+			// Accept it if it is low enough.
+			if (memory_usage <= memory_limit)
+				break;
 
-		message(V_WARNING, _("Adjusted the number of threads "
-			"from %s to %s to not exceed "
-			"the memory usage limit of %s MiB"),
-			uint64_to_str(hardware_threads_get(), 0),
-			uint64_to_str(mt_options.threads, 1),
-			uint64_to_str(round_up_to_mib(
-				memory_limit), 2));
-	}
-#endif
+			// Otherwise 1 MiB down and try again. I hope this
+			// isn't too slow method for cases where the original
+			// dict_size is very big.
+			opt->dict_size -= UINT32_C(1) << 20;
+		}
 
-	if (memory_usage <= memory_limit)
-		return;
-
-	// Look for the last filter if it is LZMA2 or LZMA1, so we can make
-	// it use less RAM. With other filters we don't know what to do.
-	size_t i = 0;
-	while (filters[i].id != LZMA_FILTER_LZMA2
-			&& filters[i].id != LZMA_FILTER_LZMA1) {
-		if (filters[i].id == LZMA_VLI_UNKNOWN)
-			memlimit_too_small(memory_usage);
-
-		++i;
+		// Tell the user that we decreased the dictionary size.
+		message(V_WARNING, _("Adjusted LZMA%c dictionary size "
+				"from %s MiB to %s MiB to not exceed "
+				"the memory usage limit of %s MiB"),
+				filters[i].id == LZMA_FILTER_LZMA2
+					? '2' : '1',
+				uint64_to_str(orig_dict_size >> 20, 0),
+				uint64_to_str(opt->dict_size >> 20, 1),
+				uint64_to_str(round_up_to_mib(
+					memory_limit), 2));
 	}
 
-	// Decrease the dictionary size until we meet the memory
-	// usage limit. First round down to full mebibytes.
-	lzma_options_lzma *opt = filters[i].options;
-	const uint32_t orig_dict_size = opt->dict_size;
-	opt->dict_size &= ~((UINT32_C(1) << 20) - 1);
-	while (true) {
-		// If it is below 1 MiB, auto-adjusting failed. We could be
-		// more sophisticated and scale it down even more, but let's
-		// see if many complain about this version.
-		//
-		// FIXME: Displays the scaled memory usage instead
-		// of the original.
-		if (opt->dict_size < (UINT32_C(1) << 20))
-			memlimit_too_small(memory_usage);
+/*
+	// Limit the number of worker threads so that memory usage
+	// limit isn't exceeded.
+	assert(memory_usage > 0);
+	size_t thread_limit = memory_limit / memory_usage;
+	if (thread_limit == 0)
+		thread_limit = 1;
 
-		memory_usage = lzma_raw_encoder_memusage(filters);
-		if (memory_usage == UINT64_MAX)
-			message_bug();
+	if (opt_threads > thread_limit)
+		opt_threads = thread_limit;
+*/
 
-		// Accept it if it is low enough.
-		if (memory_usage <= memory_limit)
-			break;
-
-		// Otherwise 1 MiB down and try again. I hope this
-		// isn't too slow method for cases where the original
-		// dict_size is very big.
-		opt->dict_size -= UINT32_C(1) << 20;
+	if (check_default) {
+		// The default check type is CRC64, but fallback to CRC32
+		// if CRC64 isn't supported by the copy of liblzma we are
+		// using. CRC32 is always supported.
+		check = LZMA_CHECK_CRC64;
+		if (!lzma_check_is_supported(check))
+			check = LZMA_CHECK_CRC32;
 	}
 
-	// Tell the user that we decreased the dictionary size.
-	message(V_WARNING, _("Adjusted LZMA%c dictionary size "
-			"from %s MiB to %s MiB to not exceed "
-			"the memory usage limit of %s MiB"),
-			filters[i].id == LZMA_FILTER_LZMA2
-				? '2' : '1',
-			uint64_to_str(orig_dict_size >> 20, 0),
-			uint64_to_str(opt->dict_size >> 20, 1),
-			uint64_to_str(round_up_to_mib(memory_limit), 2));
-
 	return;
 }
 
@@ -393,14 +354,7 @@ coder_init(file_pair *pair)
 			break;
 
 		case FORMAT_XZ:
-#ifdef HAVE_PTHREAD
-			if (hardware_threads_get() > 1)
-				ret = lzma_stream_encoder_mt(
-						&strm, &mt_options);
-			else
-#endif
-				ret = lzma_stream_encoder(
-						&strm, filters, check);
+			ret = lzma_stream_encoder(&strm, filters, check);
 			break;
 
 		case FORMAT_LZMA:
@@ -412,9 +366,8 @@ coder_init(file_pair *pair)
 			break;
 		}
 	} else {
-		uint32_t flags = LZMA_TELL_UNSUPPORTED_CHECK;
-		if (!opt_single_stream)
-			flags |= LZMA_CONCATENATED;
+		const uint32_t flags = LZMA_TELL_UNSUPPORTED_CHECK
+				| LZMA_CONCATENATED;
 
 		// We abuse FORMAT_AUTO to indicate unknown file format,
 		// for which we may consider passthru mode.
@@ -445,7 +398,7 @@ coder_init(file_pair *pair)
 
 		switch (init_format) {
 		case FORMAT_AUTO:
-			// Unknown file format. If --decompress --stdout
+			// Uknown file format. If --decompress --stdout
 			// --force have been given, then we copy the input
 			// as is to stdout. Checking for MODE_DECOMPRESS
 			// is needed, because we don't want to do use
@@ -506,8 +459,8 @@ coder_normal(file_pair *pair)
 	// Encoder needs to know when we have given all the input to it.
 	// The decoders need to know it too when we are using
 	// LZMA_CONCATENATED. We need to check for src_eof here, because
-	// the first input chunk has been already read if decompressing,
-	// and that may have been the only chunk we will read.
+	// the first input chunk has been already read, and that may
+	// have been the only chunk we will read.
 	lzma_action action = pair->src_eof ? LZMA_FINISH : LZMA_RUN;
 
 	lzma_ret ret;
@@ -515,16 +468,6 @@ coder_normal(file_pair *pair)
 	// Assume that something goes wrong.
 	bool success = false;
 
-	// block_remaining indicates how many input bytes to encode until
-	// finishing the current .xz Block. The Block size is set with
-	// --block-size=SIZE. It has an effect only when compressing
-	// to the .xz format. If block_remaining == UINT64_MAX, only
-	// a single block is created.
-	uint64_t block_remaining = UINT64_MAX;
-	if (hardware_threads_get() == 1 && opt_mode == MODE_COMPRESS
-			&& opt_format == FORMAT_XZ && opt_block_size > 0)
-		block_remaining = opt_block_size;
-
 	strm.next_out = out_buf.u8;
 	strm.avail_out = IO_BUFFER_SIZE;
 
@@ -533,23 +476,14 @@ coder_normal(file_pair *pair)
 		// end of file yet.
 		if (strm.avail_in == 0 && !pair->src_eof) {
 			strm.next_in = in_buf.u8;
-			strm.avail_in = io_read(pair, &in_buf,
-					my_min(block_remaining,
-						IO_BUFFER_SIZE));
+			strm.avail_in = io_read(
+					pair, &in_buf, IO_BUFFER_SIZE);
 
 			if (strm.avail_in == SIZE_MAX)
 				break;
 
-			if (pair->src_eof) {
+			if (pair->src_eof)
 				action = LZMA_FINISH;
-
-			} else if (block_remaining != UINT64_MAX) {
-				// Start a new Block after every
-				// opt_block_size bytes of input.
-				block_remaining -= strm.avail_in;
-				if (block_remaining == 0)
-					action = LZMA_FULL_FLUSH;
-			}
 		}
 
 		// Let liblzma do the actual work.
@@ -565,12 +499,7 @@ coder_normal(file_pair *pair)
 			strm.avail_out = IO_BUFFER_SIZE;
 		}
 
-		if (ret == LZMA_STREAM_END && action == LZMA_FULL_FLUSH) {
-			// Start a new Block.
-			action = LZMA_RUN;
-			block_remaining = opt_block_size;
-
-		} else if (ret != LZMA_OK) {
+		if (ret != LZMA_OK) {
 			// Determine if the return value indicates that we
 			// won't continue coding.
 			const bool stop = ret != LZMA_NO_CHECK
@@ -589,11 +518,6 @@ coder_normal(file_pair *pair)
 			}
 
 			if (ret == LZMA_STREAM_END) {
-				if (opt_single_stream) {
-					success = true;
-					break;
-				}
-
 				// Check that there is no trailing garbage.
 				// This is needed for LZMA_Alone and raw
 				// streams.
@@ -696,15 +620,10 @@ coder_run(const char *filename)
 	// Assume that something goes wrong.
 	bool success = false;
 
-	if (opt_mode == MODE_COMPRESS) {
-		strm.next_in = NULL;
-		strm.avail_in = 0;
-	} else {
-		// Read the first chunk of input data. This is needed
-		// to detect the input file type.
-		strm.next_in = in_buf.u8;
-		strm.avail_in = io_read(pair, &in_buf, IO_BUFFER_SIZE);
-	}
+	// Read the first chunk of input data. This is needed to detect
+	// the input file type (for now, only for decompression).
+	strm.next_in = in_buf.u8;
+	strm.avail_in = io_read(pair, &in_buf, IO_BUFFER_SIZE);
 
 	if (strm.avail_in != SIZE_MAX) {
 		// Initialize the coder. This will detect the file format
@@ -742,13 +661,3 @@ coder_run(const char *filename)
 
 	return;
 }
-
-
-#ifndef NDEBUG
-extern void
-coder_free(void)
-{
-	lzma_end(&strm);
-	return;
-}
-#endif

src/xz/coder.h

@@ -41,18 +41,12 @@ extern enum format_type opt_format;
 /// they exceed the memory usage limit.
 extern bool opt_auto_adjust;
 
-/// If true, stop after decoding the first stream.
-extern bool opt_single_stream;
-
-/// If non-zero, start a new .xz Block after every opt_block_size bytes
-/// of input. This has an effect only when compressing to the .xz format.
-extern uint64_t opt_block_size;
 
 /// Set the integrity check type used when compressing
 extern void coder_set_check(lzma_check check);
 
 /// Set preset number
-extern void coder_set_preset(uint32_t new_preset);
+extern void coder_set_preset(size_t new_preset);
 
 /// Enable extreme mode
 extern void coder_set_extreme(void);
@@ -65,8 +59,3 @@ extern void coder_set_compression_settings(void);
 
 /// Compress or decompress the given file
 extern void coder_run(const char *filename);
-
-#ifndef NDEBUG
-/// Free the memory allocated for the coder and kill the worker threads.
-extern void coder_free(void);
-#endif

src/xz/file_io.c

@@ -68,7 +68,8 @@ io_init(void)
 #ifdef __DJGPP__
 	// Avoid doing useless things when statting files.
 	// This isn't important but doesn't hurt.
-	_djstat_flags = _STAT_EXEC_EXT | _STAT_EXEC_MAGIC | _STAT_DIRSIZE;
+	_djstat_flags = _STAT_INODE | _STAT_EXEC_EXT
+			| _STAT_EXEC_MAGIC | _STAT_DIRSIZE;
 #endif
 
 	return;
@@ -292,10 +293,6 @@ io_open_src_real(file_pair *pair)
 		pair->src_fd = STDIN_FILENO;
 #ifdef TUKLIB_DOSLIKE
 		setmode(STDIN_FILENO, O_BINARY);
-#endif
-#ifdef HAVE_POSIX_FADVISE
-		// It will fail if stdin is a pipe and that's fine.
-		(void)posix_fadvise(STDIN_FILENO, 0, 0, POSIX_FADV_SEQUENTIAL);
 #endif
 		return false;
 	}
@@ -451,18 +448,8 @@ io_open_src_real(file_pair *pair)
 
 	// Stat the source file. We need the result also when we copy
 	// the permissions, and when unlinking.
-	//
-	// NOTE: Use stat() instead of fstat() with DJGPP, because
-	// then we have a better chance to get st_ino value that can
-	// be used in io_open_dest_real() to prevent overwriting the
-	// source file.
-#ifdef __DJGPP__
-	if (stat(pair->src_name, &pair->src_st))
-		goto error_msg;
-#else
 	if (fstat(pair->src_fd, &pair->src_st))
 		goto error_msg;
-#endif
 
 	if (S_ISDIR(pair->src_st.st_mode)) {
 		message_warning(_("%s: Is a directory, skipping"),
@@ -510,17 +497,6 @@ io_open_src_real(file_pair *pair)
 	}
 #endif
 
-#ifdef HAVE_POSIX_FADVISE
-	const int fadvise_ret = posix_fadvise(
-			pair->src_fd, 0, 0, POSIX_FADV_SEQUENTIAL);
-
-	// It shouldn't fail, but if it does anyway, it doesn't matter.
-	// Check it with an assertion so that if something gets messed
-	// up in the future, it will get caught when debugging is enabled.
-	assert(fadvise_ret == 0);
-	(void)fadvise_ret;
-#endif
-
 	return false;
 
 error_msg:
@@ -608,28 +584,6 @@ io_open_dest_real(file_pair *pair)
 		if (pair->dest_name == NULL)
 			return true;
 
-#ifdef __DJGPP__
-		struct stat st;
-		if (stat(pair->dest_name, &st) == 0) {
-			// Check that it isn't a special file like "prn".
-			if (st.st_dev == -1) {
-				message_error("%s: Refusing to write to "
-						"a DOS special file",
-						pair->dest_name);
-				return true;
-			}
-
-			// Check that we aren't overwriting the source file.
-			if (st.st_dev == pair->src_st.st_dev
-					&& st.st_ino == pair->src_st.st_ino) {
-				message_error("%s: Output file is the same "
-						"as the input file",
-						pair->dest_name);
-				return true;
-			}
-		}
-#endif
-
 		// If --force was used, unlink the target file first.
 		if (opt_force && unlink(pair->dest_name) && errno != ENOENT) {
 			message_error(_("%s: Cannot remove: %s"),
@@ -652,19 +606,17 @@ io_open_dest_real(file_pair *pair)
 		}
 	}
 
-#ifndef TUKLIB_DOSLIKE
-	// dest_st isn't used on DOS-like systems except as a dummy
-	// argument to io_unlink(), so don't fstat() on such systems.
+	// If this really fails... well, we have a safe fallback.
 	if (fstat(pair->dest_fd, &pair->dest_st)) {
-		// If fstat() really fails, we have a safe fallback here.
-#	if defined(__VMS)
+#if defined(__VMS)
 		pair->dest_st.st_ino[0] = 0;
 		pair->dest_st.st_ino[1] = 0;
 		pair->dest_st.st_ino[2] = 0;
-#	else
+#elif !defined(TUKLIB_DOSLIKE)
 		pair->dest_st.st_dev = 0;
 		pair->dest_st.st_ino = 0;
-#	endif
+#endif
+#ifndef TUKLIB_DOSLIKE
 	} else if (try_sparse && opt_mode == MODE_DECOMPRESS) {
 		// When writing to standard output, we need to be extra
 		// careful:
@@ -722,8 +674,8 @@ io_open_dest_real(file_pair *pair)
 		}
 
 		pair->dest_try_sparse = true;
-	}
 #endif
+	}
 
 	return false;
 }

src/xz/hardware.c

@@ -14,9 +14,9 @@
 #include "tuklib_cpucores.h"
 
 
-/// Maximum number of worker threads. This can be set with
+/// Maximum number of free *coder* threads. This can be set with
 /// the --threads=NUM command line option.
-static uint32_t threads_max = 1;
+static uint32_t threadlimit;
 
 /// Memory usage limit for compression
 static uint64_t memlimit_compress;
@@ -29,16 +29,15 @@ static uint64_t total_ram;
 
 
 extern void
-hardware_threads_set(uint32_t n)
+hardware_threadlimit_set(uint32_t new_threadlimit)
 {
-	if (n == 0) {
-		// Automatic number of threads was requested.
-		// Use the number of available CPU cores.
-		threads_max = tuklib_cpucores();
-		if (threads_max == 0)
-			threads_max = 1;
+	if (new_threadlimit == 0) {
+		// The default is the number of available CPU cores.
+		threadlimit = tuklib_cpucores();
+		if (threadlimit == 0)
+			threadlimit = 1;
 	} else {
-		threads_max = n;
+		threadlimit = new_threadlimit;
 	}
 
 	return;
@@ -46,9 +45,9 @@ hardware_threads_set(uint32_t n)
 
 
 extern uint32_t
-hardware_threads_get(void)
+hardware_threadlimit_get(void)
 {
-	return threads_max;
+	return threadlimit;
 }
 
 
@@ -140,5 +139,6 @@ hardware_init(void)
 
 	// Set the defaults.
 	hardware_memlimit_set(0, true, true, false);
+	hardware_threadlimit_set(0);
 	return;
 }

src/xz/hardware.h

@@ -15,11 +15,12 @@
 extern void hardware_init(void);
 
 
-/// Set the maximum number of worker threads.
-extern void hardware_threads_set(uint32_t threadlimit);
+/// Set custom value for maximum number of coder threads.
+extern void hardware_threadlimit_set(uint32_t threadlimit);
 
-/// Get the maximum number of worker threads.
-extern uint32_t hardware_threads_get(void);
+/// Get the maximum number of coder threads. Some additional helper threads
+/// are allowed on top of this).
+extern uint32_t hardware_threadlimit_get(void);
 
 
 /// Set the memory usage limit. There are separate limits for compression
@@ -34,4 +35,4 @@ extern void hardware_memlimit_set(uint64_t new_memlimit,
 extern uint64_t hardware_memlimit_get(enum operation_mode mode);
 
 /// Display the amount of RAM and memory usage limits and exit.
-extern void hardware_memlimit_show(void) lzma_attribute((noreturn));
+extern void hardware_memlimit_show(void) lzma_attribute((__noreturn__));

src/xz/main.c

@@ -275,10 +275,6 @@ main(int argc, char **argv)
 		list_totals();
 	}
 
-#ifndef NDEBUG
-	coder_free();
-#endif
-
 	// If we have got a signal, raise it to kill the program instead
 	// of calling tuklib_exit().
 	signals_exit();

src/xz/message.c

@@ -94,7 +94,7 @@ static volatile sig_atomic_t progress_needs_updating = false;
 
 /// Signal handler for SIGALRM
 static void
-progress_signal_handler(int sig lzma_attribute((unused)))
+progress_signal_handler(int sig lzma_attribute((__unused__)))
 {
 	progress_needs_updating = true;
 	return;
@@ -726,7 +726,11 @@ vmessage(enum message_verbosity v, const char *fmt, va_list ap)
 
 		progress_flush(false);
 
-		fprintf(stderr, "%s: ", progname);
+		// TRANSLATORS: This is the program name in the beginning
+		// of the line in messages. Usually it becomes "xz: ".
+		// This is a translatable string because French needs
+		// a space before a colon.
+		fprintf(stderr, _("%s: "), progname);
 		vfprintf(stderr, fmt, ap);
 		fputc('\n', stderr);
 
@@ -1108,10 +1112,7 @@ message_help(bool long_help)
 "  -f, --force         force overwrite of output file and (de)compress links\n"
 "  -c, --stdout        write to standard output and don't delete input files"));
 
-	if (long_help) {
-		puts(_(
-"      --single-stream decompress only the first stream, and silently\n"
-"                      ignore possible remaining input data"));
+	if (long_help)
 		puts(_(
 "      --no-sparse     do not create sparse files when decompressing\n"
 "  -S, --suffix=.SUF   use the suffix `.SUF' on compressed files\n"
@@ -1119,7 +1120,6 @@ message_help(bool long_help)
 "                      omitted, filenames are read from the standard input;\n"
 "                      filenames must be terminated with the newline character\n"
 "      --files0[=FILE] like --files but use the null character as terminator"));
-	}
 
 	if (long_help) {
 		puts(_("\n Basic file format and compression options:\n"));
@@ -1139,10 +1139,6 @@ message_help(bool long_help)
 "                      does not affect decompressor memory requirements"));
 
 	if (long_help) {
-		puts(_(
-"      --block-size=SIZE\n"
-"                      when compressing to the .xz format, start a new block\n"
-"                      after every SIZE bytes of input; 0=disabled (default)"));
 		puts(_( // xgettext:no-c-format
 "      --memlimit-compress=LIMIT\n"
 "      --memlimit-decompress=LIMIT\n"

src/xz/message.h

@@ -45,7 +45,7 @@ extern enum message_verbosity message_verbosity_get(void);
 ///
 /// This doesn't touch the exit status.
 extern void message(enum message_verbosity verbosity, const char *fmt, ...)
-		lzma_attribute((format(printf, 2, 3)));
+		lzma_attribute((__format__(__printf__, 2, 3)));
 
 
 /// \brief      Prints a warning and possibly sets exit status
@@ -53,7 +53,7 @@ extern void message(enum message_verbosity verbosity, const char *fmt, ...)
 /// The message is printed only if verbosity level is at least V_WARNING.
 /// The exit status is set to WARNING unless it was already at ERROR.
 extern void message_warning(const char *fmt, ...)
-		lzma_attribute((format(printf, 1, 2)));
+		lzma_attribute((__format__(__printf__, 1, 2)));
 
 
 /// \brief      Prints an error message and sets exit status
@@ -61,25 +61,25 @@ extern void message_warning(const char *fmt, ...)
 /// The message is printed only if verbosity level is at least V_ERROR.
 /// The exit status is set to ERROR.
 extern void message_error(const char *fmt, ...)
-		lzma_attribute((format(printf, 1, 2)));
+		lzma_attribute((__format__(__printf__, 1, 2)));
 
 
 /// \brief      Prints an error message and exits with EXIT_ERROR
 ///
 /// The message is printed only if verbosity level is at least V_ERROR.
 extern void message_fatal(const char *fmt, ...)
-		lzma_attribute((format(printf, 1, 2)))
-		lzma_attribute((noreturn));
+		lzma_attribute((__format__(__printf__, 1, 2)))
+		lzma_attribute((__noreturn__));
 
 
 /// Print an error message that an internal error occurred and exit with
 /// EXIT_ERROR.
-extern void message_bug(void) lzma_attribute((noreturn));
+extern void message_bug(void) lzma_attribute((__noreturn__));
 
 
 /// Print a message that establishing signal handlers failed, and exit with
 /// exit status ERROR.
-extern void message_signal_handler(void) lzma_attribute((noreturn));
+extern void message_signal_handler(void) lzma_attribute((__noreturn__));
 
 
 /// Convert lzma_ret to a string.
@@ -116,11 +116,11 @@ extern void message_try_help(void);
 
 
 /// Prints the version number to stdout and exits with exit status SUCCESS.
-extern void message_version(void) lzma_attribute((noreturn));
+extern void message_version(void) lzma_attribute((__noreturn__));
 
 
 /// Print the help message.
-extern void message_help(bool long_help) lzma_attribute((noreturn));
+extern void message_help(bool long_help) lzma_attribute((__noreturn__));
 
 
 /// \brief      Set the total number of files to be processed

src/xz/options.c

@@ -150,7 +150,7 @@ enum {
 
 static void
 set_delta(void *options, uint32_t key, uint64_t value,
-		const char *valuestr lzma_attribute((unused)))
+		const char *valuestr lzma_attribute((__unused__)))
 {
 	lzma_options_delta *opt = options;
 	switch (key) {
@@ -194,7 +194,7 @@ enum {
 
 static void
 set_bcj(void *options, uint32_t key, uint64_t value,
-		const char *valuestr lzma_attribute((unused)))
+		const char *valuestr lzma_attribute((__unused__)))
 {
 	lzma_options_bcj *opt = options;
 	switch (key) {
@@ -241,7 +241,7 @@ enum {
 };
 
 
-static void lzma_attribute((noreturn))
+static void lzma_attribute((__noreturn__))
 error_lzma_preset(const char *valuestr)
 {
 	message_fatal(_("Unsupported LZMA1/LZMA2 preset: %s"), valuestr);

src/xz/private.h

@@ -12,8 +12,6 @@
 
 #include "sysdefs.h"
 #include "mythread.h"
-
-#define LZMA_UNSTABLE
 #include "lzma.h"
 
 #include <sys/types.h>

src/xz/signals.c

@@ -179,7 +179,7 @@ signals_exit(void)
 // console window.
 
 static BOOL WINAPI
-signal_handler(DWORD type lzma_attribute((unused)))
+signal_handler(DWORD type lzma_attribute((__unused__)))
 {
 	// Since we don't get a signal number which we could raise() at
 	// signals_exit() like on POSIX, just set the exit status to

src/xz/suffix.c

@@ -12,10 +12,6 @@
 
 #include "private.h"
 
-#ifdef __DJGPP__
-#	include <fcntl.h>
-#endif
-
 // For case-insensitive filename suffix on case-insensitive systems
 #if defined(TUKLIB_DOSLIKE) || defined(__VMS)
 #	define strcmp strcasecmp
@@ -49,31 +45,6 @@ has_dir_sep(const char *str)
 }
 
 
-#ifdef __DJGPP__
-/// \brief      Test for special suffix used for 8.3 short filenames (SFN)
-///
-/// \return     If str matches *.?- or *.??-, true is returned. Otherwise
-///             false is returned.
-static bool
-has_sfn_suffix(const char *str, size_t len)
-{
-	if (len >= 4 && str[len - 1] == '-' && str[len - 2] != '.'
-			&& !is_dir_sep(str[len - 2])) {
-		// *.?-
-		if (str[len - 3] == '.')
-			return !is_dir_sep(str[len - 4]);
-
-		// *.??-
-		if (len >= 5 && !is_dir_sep(str[len - 3])
-				&& str[len - 4] == '.')
-			return !is_dir_sep(str[len - 5]);
-	}
-
-	return false;
-}
-#endif
-
-
 /// \brief      Checks if src_name has given compressed_suffix
 ///
 /// \param      suffix      Filename suffix to look for
@@ -116,9 +87,6 @@ uncompressed_name(const char *src_name, const size_t src_len)
 		{ ".xz",    "" },
 		{ ".txz",   ".tar" }, // .txz abbreviation for .txt.gz is rare.
 		{ ".lzma",  "" },
-#ifdef __DJGPP__
-		{ ".lzm",   "" },
-#endif
 		{ ".tlz",   ".tar" },
 		// { ".gz",    "" },
 		// { ".tgz",   ".tar" },
@@ -144,17 +112,6 @@ uncompressed_name(const char *src_name, const size_t src_len)
 				break;
 			}
 		}
-
-#ifdef __DJGPP__
-		// Support also *.?- -> *.? and *.??- -> *.?? on DOS.
-		// This is done also when long filenames are available
-		// to keep it easy to decompress files created when
-		// long filename support wasn't available.
-		if (new_len == 0 && has_sfn_suffix(src_name, src_len)) {
-			new_suffix = "";
-			new_len = src_len - 1;
-		}
-#endif
 	}
 
 	if (new_len == 0 && custom_suffix != NULL)
@@ -177,35 +134,21 @@ uncompressed_name(const char *src_name, const size_t src_len)
 }
 
 
-/// This message is needed in multiple places in compressed_name(),
-/// so the message has been put into its own function.
-static void
-msg_suffix(const char *src_name, const char *suffix)
-{
-	message_warning(_("%s: File already has `%s' suffix, skipping"),
-			src_name, suffix);
-	return;
-}
-
-
 /// \brief      Appends suffix to src_name
 ///
 /// In contrast to uncompressed_name(), we check only suffixes that are valid
 /// for the specified file format.
 static char *
-compressed_name(const char *src_name, size_t src_len)
+compressed_name(const char *src_name, const size_t src_len)
 {
 	// The order of these must match the order in args.h.
-	static const char *const all_suffixes[][4] = {
+	static const char *const all_suffixes[][3] = {
 		{
 			".xz",
 			".txz",
 			NULL
 		}, {
 			".lzma",
-#ifdef __DJGPP__
-			".lzm",
-#endif
 			".tlz",
 			NULL
 /*
@@ -227,27 +170,20 @@ compressed_name(const char *src_name, size_t src_len)
 	const size_t format = opt_format - 1;
 	const char *const *suffixes = all_suffixes[format];
 
-	// Look for known filename suffixes and refuse to compress them.
 	for (size_t i = 0; suffixes[i] != NULL; ++i) {
 		if (test_suffix(suffixes[i], src_name, src_len) != 0) {
-			msg_suffix(src_name, suffixes[i]);
+			message_warning(_("%s: File already has `%s' "
+					"suffix, skipping"), src_name,
+					suffixes[i]);
 			return NULL;
 		}
 	}
 
-#ifdef __DJGPP__
-	// Recognize also the special suffix that is used when long
-	// filename (LFN) support isn't available. This suffix is
-	// recognized on LFN systems too.
-	if (opt_format == FORMAT_XZ && has_sfn_suffix(src_name, src_len)) {
-		msg_suffix(src_name, "-");
-		return NULL;
-	}
-#endif
-
 	if (custom_suffix != NULL) {
 		if (test_suffix(custom_suffix, src_name, src_len) != 0) {
-			msg_suffix(src_name, custom_suffix);
+			message_warning(_("%s: File already has `%s' "
+					"suffix, skipping"), src_name,
+					custom_suffix);
 			return NULL;
 		}
 	}
@@ -263,101 +199,7 @@ compressed_name(const char *src_name, size_t src_len)
 
 	const char *suffix = custom_suffix != NULL
 			? custom_suffix : suffixes[0];
-	size_t suffix_len = strlen(suffix);
-
-#ifdef __DJGPP__
-	if (!_use_lfn(src_name)) {
-		// Long filename (LFN) support isn't available and we are
-		// limited to 8.3 short filenames (SFN).
-		//
-		// Look for suffix separator from the filename, and make sure
-		// that it is in the filename, not in a directory name.
-		const char *sufsep = strrchr(src_name, '.');
-		if (sufsep == NULL || sufsep[1] == '\0'
-				|| has_dir_sep(sufsep)) {
-			// src_name has no filename extension.
-			//
-			// Examples:
-			// xz foo         -> foo.xz
-			// xz -F lzma foo -> foo.lzm
-			// xz -S x foo    -> foox
-			// xz -S x foo.   -> foo.x
-			// xz -S x.y foo  -> foox.y
-			// xz -S .x foo   -> foo.x
-			// xz -S .x foo.  -> foo.x
-			//
-			// Avoid double dots:
-			if (sufsep != NULL && sufsep[1] == '\0'
-					&& suffix[0] == '.')
-				--src_len;
-
-		} else if (custom_suffix == NULL
-				&& strcasecmp(sufsep, ".tar") == 0) {
-			// ".tar" is handled specially.
-			//
-			// Examples:
-			// xz foo.tar          -> foo.txz
-			// xz -F lzma foo.tar  -> foo.tlz
-			static const char *const tar_suffixes[] = {
-				".txz",
-				".tlz",
-				// ".tgz",
-			};
-			suffix = tar_suffixes[format];
-			suffix_len = 4;
-			src_len -= 4;
-
-		} else {
-			if (custom_suffix == NULL && opt_format == FORMAT_XZ) {
-				// Instead of the .xz suffix, use a single
-				// character at the end of the filename
-				// extension. This is to minimize name
-				// conflicts when compressing multiple files
-				// with the same basename. E.g. foo.txt and
-				// foo.exe become foo.tx- and foo.ex-. Dash
-				// is rare as the last character of the
-				// filename extension, so it seems to be
-				// quite safe choice and it stands out better
-				// in directory listings than e.g. x. For
-				// comparison, gzip uses z.
-				suffix = "-";
-				suffix_len = 1;
-			}
-
-			if (suffix[0] == '.') {
-				// The first character of the suffix is a dot.
-				// Throw away the original filename extension
-				// and replace it with the new suffix.
-				//
-				// Examples:
-				// xz -F lzma foo.txt  -> foo.lzm
-				// xz -S .x  foo.txt   -> foo.x
-				src_len = sufsep - src_name;
-
-			} else {
-				// The first character of the suffix is not
-				// a dot. Preserve the first 0-2 characters
-				// of the original filename extension.
-				//
-				// Examples:
-				// xz foo.txt         -> foo.tx-
-				// xz -S x  foo.c     -> foo.cx
-				// xz -S ab foo.c     -> foo.cab
-				// xz -S ab foo.txt   -> foo.tab
-				// xz -S abc foo.txt  -> foo.abc
-				//
-				// Truncate the suffix to three chars:
-				if (suffix_len > 3)
-					suffix_len = 3;
-
-				// If needed, overwrite 1-3 characters.
-				if (strlen(sufsep) > 4 - suffix_len)
-					src_len = sufsep - src_name
-							+ 4 - suffix_len;
-			}
-		}
-	}
-#endif
+	const size_t suffix_len = strlen(suffix);
 
 	char *dest_name = xmalloc(src_len + suffix_len + 1);
 

src/xz/util.h

@@ -20,11 +20,11 @@
 
 /// \brief      Safe realloc() that never returns NULL
 extern void *xrealloc(void *ptr, size_t size)
-		lzma_attribute((malloc)) lzma_attr_alloc_size(2);
+		lzma_attribute((__malloc__)) lzma_attr_alloc_size(2);
 
 
 /// \brief      Safe strdup() that never returns NULL
-extern char *xstrdup(const char *src) lzma_attribute((malloc));
+extern char *xstrdup(const char *src) lzma_attribute((__malloc__));
 
 
 /// \brief      Fancy version of strtoull()
@@ -102,7 +102,7 @@ extern const char *uint64_to_nicestr(uint64_t value,
 /// A maximum of *left bytes is written starting from *pos. *pos and *left
 /// are updated accordingly.
 extern void my_snprintf(char **pos, size_t *left, const char *fmt, ...)
-		lzma_attribute((format(printf, 3, 4)));
+		lzma_attribute((__format__(__printf__, 3, 4)));
 
 
 /// \brief      Check if filename is empty and print an error message

src/xz/xz.1

@@ -5,7 +5,7 @@
 .\" This file has been put into the public domain.
 .\" You can do whatever you want with this file.
 .\"
-.TH XZ 1 "2011-04-12" "Tukaani" "XZ Utils"
+.TH XZ 1 "2010-10-04" "Tukaani" "XZ Utils"
 .
 .SH NAME
 xz, unxz, xzcat, lzma, unlzma, lzcat \- Compress or decompress .xz and .lzma files
@@ -434,29 +434,6 @@ standard output instead of a file.
 This implies
 .BR \-\-keep .
 .TP
-.B \-\-single\-stream
-Decompress only the first
-.B .xz
-stream, and
-silently ignore possible remaining input data following the stream.
-Normally such trailing garbage makes
-.B xz
-display an error.
-.IP ""
-.B xz
-never decompresses more than one stream from
-.B .lzma
-files or raw streams, but this option still makes
-.B xz
-ignore the possible trailing data after the
-.B .lzma
-file or raw stream.
-.IP ""
-This option has no effect if the operation mode is not
-.B \-\-decompress
-or
-.BR \-\-test .
-.TP
 .B \-\-no\-sparse
 Disable creation of sparse files.
 By default, if decompressing into a regular file,
@@ -800,15 +777,6 @@ These are provided only for backwards compatibility
 with LZMA Utils.
 Avoid using these options.
 .TP
-.BI \-\-block\-size= size
-When compressing to the
-.B .xz
-format, split the input data into blocks of
-.I size
-bytes.
-The blocks are compressed independently from each other.
-.\" FIXME: Explain how to his can be used for random access and threading.
-.TP
 .BI \-\-memlimit\-compress= limit
 Set a memory usage limit for compression.
 If this option is specified multiple times,
@@ -907,30 +875,24 @@ Automatic adjusting is always disabled when creating raw streams
 .TP
 \fB\-T\fR \fIthreads\fR, \fB\-\-threads=\fIthreads
 Specify the number of worker threads to use.
-Setting
-.I threads
-to a special value
-.B 0
-makes
-.B xz
-use as many threads as there are CPU cores on the system.
 The actual number of threads can be less than
 .I threads
-if the input file is not big enough
-for threading with the given settings or
 if using more threads would exceed the memory usage limit.
 .IP ""
-Currently the only threading method is to split the input into
-blocks and compress them independently from each other.
-The default block size depends on the compression level and
-can be overriden with the
-.BI \-\-block\-size= size
-option.
+.B "Multithreaded compression and decompression are not"
+.B "implemented yet, so this option has no effect for now."
 .IP ""
-.B "It is possible that the details of this option change before"
-.B "the next stable XZ Utils release."
-.B "This may include the meaning of the special value 0."
-.\" FIXME
+.B "As of writing (2010-09-27), it hasn't been decided"
+.B "if threads will be used by default on multicore systems"
+.B "once support for threading has been implemented."
+.B "Comments are welcome."
+The complicating factor is that using many threads
+will increase the memory usage dramatically.
+Note that if multithreading will be the default,
+it will probably be done so that single-threaded and
+multithreaded modes produce the same output,
+so compression ratio won't be significantly affected
+if threading will be enabled by default.
 .
 .SS "Custom compressor filter chains"
 A custom filter chain allows specifying
@@ -2180,9 +2142,7 @@ If there is data left after the first
 .B .lzma
 stream,
 .B xz
-considers the file to be corrupt unless
-.B \-\-single\-stream
-was used.
+considers the file to be corrupt.
 This may break obscure scripts which have
 assumed that trailing garbage is ignored.
 .

src/xzdec/xzdec.c

@@ -40,7 +40,7 @@
 static unsigned int display_errors = 2;
 
 
-static void lzma_attribute((format(printf, 1, 2)))
+static void lzma_attribute((__format__(__printf__, 1, 2)))
 my_errorf(const char *fmt, ...)
 {
 	va_list ap;
@@ -57,7 +57,7 @@ my_errorf(const char *fmt, ...)
 }
 
 
-static void lzma_attribute((noreturn))
+static void lzma_attribute((__noreturn__))
 help(void)
 {
 	printf(
@@ -81,7 +81,7 @@ PACKAGE_NAME " home page: <" PACKAGE_URL ">\n", progname);
 }
 
 
-static void lzma_attribute((noreturn))
+static void lzma_attribute((__noreturn__))
 version(void)
 {
 	printf(TOOL_FORMAT "dec (" PACKAGE_NAME ") " LZMA_VERSION_STRING "\n"