e1bf0a2c24
* fix(ci): resume linter archive downloads Retry truncated actionlint and shellcheck downloads from the bytes already received instead of starting over on each attempt. Co-authored-by: Qwen-Coder <[email protected]> * fix(ci): resume only after the first linter download attempt The retry loop passed --continue-at - on every attempt, including the first one, right after the stale local copy was removed. A resume request against a missing file appends only the tail, so the archive failed its SHA-256 pin and the lane died. The PR's own test asserts the opposite: the first request must not resume, retries must. Co-authored-by: Qwen-Coder <[email protected]> Patrol-Run: qwen-pr-closeout/jmvy7yxvq7f * fix(ci): bound linter download retries to the CI step budget Three review findings on the resume loop: - Five attempts at --max-time 90 plus 5/10/15/20s of backoff is 500s, which outlasts the 5-minute 'GitHub CI helper checks' step that runs this installer (ci.yml:1433). On a stalled asset host the fourth attempt was cut off by the step, so neither the final exit nor the same step's --actionlint/--yamllint/helper tests ran. Three attempts put the worst case at 285s, in line with the ~273s bound of the curl --retry 2 call this loop replaced. - curl resolves --continue-at - against a missing file to offset 0 and sends no Range header, so the old comment described a hazard that cannot happen and the first-attempt guard it justified was inert on the wire. The comment now states what the loop and the 33/36 branch actually do, and the guard is gone. - Neither the 33/36 rm -f nor the attempt cap was covered: deleting the rm -f and raising the cap to 99 both left the suite green. Two tests now pin them, each verified to fail under its own single mutant. Co-authored-by: Qwen-Coder <[email protected]> Patrol-Run: qwen-pr-closeout/jmvymz2cq81 * fix(ci): state the real resume budget and name the failed archive Address the three review Suggestions on this PR's own new code: - Budget comment: 285s is per archive, and the steps that provision both archives inside one 5-minute step can still cut the second one off. Also drop the PR body's "up to five attempts", which never matched the three the code ships. - Terminal silence: the last attempt exits before the retry line, so a continue-on-error run ended on "retrying in 10s..." with no archive named and no exhausted budget. Echo that line, keeping curl's own exit status. - Range-refusal rationale: measured curl exits 33 and leaves the partial byte-identical, so the rm -f is load-bearing because every attempt would otherwise re-send the same offset, not because a second body gets appended. The stub now models that sequence (28 with a partial, then 33 untouched, then a clean full body). Co-authored-by: Qwen-Coder <[email protected]> Patrol-Run: qwen-pr-closeout/jmw0d4pwgah --------- Co-authored-by: Qwen-Coder <[email protected]> Co-authored-by: yiliang114 <[email protected]>
The open-source AI coding agent for your terminal, editor, desktop, browser, and chat.
中文 | Deutsch | français | 日本語 | Русский | Português (Brasil) | 한국어
Why Qwen Code?
- Agentic out of the box — Auto-Memory, Auto-Skills, SubAgents, Agent Teams, and MCP. Dynamic workflows, zero setup.
- Open-source, inside and out — The framework and the Qwen models are open-source. They evolve together. No vendor lock-in.
- Multi-protocol — Supports OpenAI, Anthropic, Gemini, and Qwen APIs. Any third-party provider or local model (Ollama / vLLM). Switch at runtime.
- Beyond the terminal — IDE plugins, Desktop app, Web UI, SDKs, and chat integrations (Telegram / DingTalk / WeChat / Feishu).
Tip
Qwen Code is actively iterating on itself — using its own agent and models to file issues, submit PRs, review code, and run tests. Powered by the community, driven by AI.
Installation
Linux / macOS:
curl -fsSL https://qwen-code-assets.oss-cn-hangzhou.aliyuncs.com/installation/install-qwen-standalone.sh | bash
Windows:
irm https://qwen-code-assets.oss-cn-hangzhou.aliyuncs.com/installation/install-qwen-standalone.ps1 | iex
Restart your terminal after installation to ensure environment variables take effect.
NPM / Homebrew
NPM (requires Node.js 22+):
npm install -g @qwen-code/qwen-code@latest
Homebrew (macOS / Linux):
brew install qwen-code
Quick Start
Open a terminal in your project and start Qwen Code:
cd /path/to/your-project
qwen
Inside the session, run /auth to configure your provider and API key. Then try:
Explain this repository and show me where to start.
See the Authentication Guide and Settings Reference for detailed setup.
See the terminal interface
How to Use Qwen Code
Choose the interface that fits your workflow:
| Interface | Get started |
|---|---|
| Terminal | Run qwen in your project — see Quick Start. |
| Desktop | Download Qwen Code Desktop for macOS, Windows, and Linux. |
| Web | Run qwen serve --open to open the Web UI in your browser. (experimental) |
| Editor | Set up VS Code, Zed, or JetBrains. |
| Chat | Connect Telegram, DingTalk, WeChat, or Feishu, then run qwen channel start. |
For automation and custom integrations:
- Headless — Run
qwen -p "..."in scripts, CI/CD, or batch jobs. - SDKs — Build with TypeScript, Python, or Java.
- Daemon — Run
qwen serveto connect clients over HTTP + SSE (ACP). (experimental) Daemon guide. - Computer Use — Set up native MCP tools or Node REPL + SDK in Qwen Code, Claude Code, or Codex.
SDK example (Python)
import asyncio
from qwen_code_sdk import is_sdk_result_message, query
async def main() -> None:
result = query(
"Summarize the repository layout.",
{
"cwd": "/path/to/project",
"path_to_qwen_executable": "qwen",
},
)
async for message in result:
if is_sdk_result_message(message):
print(message["result"])
asyncio.run(main())
Daemon Mode
Run Qwen Code as a long-lived service when you want browser, editor, SDK, and automation clients to share agent sessions without each starting a separate process. The daemon provides the built-in Web Shell and an HTTP + SSE API, supports multiple workspaces, and lets clients reconnect to active sessions.
Start it in the foreground and open the Web Shell:
qwen serve --open
The default address is http://127.0.0.1:4170. To run and manage it in the background instead:
qwen daemon start
qwen daemon status
qwen daemon logs -f
qwen daemon stop
By default, the daemon listens on loopback without bearer authentication; any local process that can reach it can use the full API, including code execution. On shared or untrusted hosts, set QWEN_SERVER_TOKEN and use --require-auth. See the Daemon guide for workspaces, authentication, remote access, and the API.
Capabilities
If you know Claude Code, you already know Qwen Code — and then some. We've put significant effort into bringing Qwen Code to feature parity with Claude Code, improving both breadth and reliability across the board.
| Feature | Qwen Code | Claude Code |
|---|---|---|
| SubAgents, Agent Teams, Dynamic Workflows | ✓ | ✓ |
| Auto-Memory, Auto-Skills, Hooks | ✓ | ✓ |
| Built-in Skills (/review, /batch, /loop, /bugfix…) | ✓ | ✓ |
| MCP, Plan Mode, LSP Integration | ✓ | ✓ |
| Auto Mode, Sandbox, Git Worktrees | ✓ | ✓ |
| Computer Use (desktop automation) | ✓ | ✓ |
| IDE Plugins (VS Code / JetBrains / Zed) | ✓ | ✓ |
| SDK | ✓ | ✓ |
| Headless Mode, Session Management | ✓ | ✓ |
| Open-source — model and framework | ✓ | — |
| Multi-protocol (OpenAI / Anthropic / Gemini / Qwen + any provider) | ✓ | — |
| Agent Arena (multi-model head-to-head on same task) | ✓ | — |
Daemon Mode — qwen serve (multi-client shared agent) |
✓ | — |
| IM Channels (Telegram / DingTalk / WeChat / Feishu) | ✓ | — |
Qwen Code Evaluation
On SWE-bench Verified, seven Qwen Code versions scored 76.40%–77.80% on average using the same Qwen 3.7 Max model (500 tasks, three trials per version).
Full results and evaluation configuration →
Ecosystem
-
Qwen Code Desktop — Official desktop app for macOS, Windows, and Linux
-
AionUi — A modern GUI for command-line AI tools including Qwen Code
-
Gemini CLI Desktop — A cross-platform desktop/web/mobile UI for Qwen Code
-
qwen-audio-agent — Realtime full-duplex voice frontend for Qwen Code over ACP — talk hands-free with barge-in and a local wake word
-
🦞 Qwen Code Claw — Let other agents (Claude, Codex, etc.) delegate coding tasks to Qwen Code via ACP. Paste this prompt into your agent:
Use Qwen Code as a coding agent. First, fetch and read this skill reference:
https://raw.githubusercontent.com/QwenLM/qwen-code/refs/heads/main/.qwen/skills/qwen-code-claw/SKILL.md
Then follow the instructions inside to install, authenticate, and use Qwen Code via acpx for all coding tasks.
- Aliyun Model Studio CLI — Official CLI for Aliyun's AI platform (
bailian-cli). Extends Qwen Code with image/video generation, knowledge retrieval, app orchestration, and model deployment
Privacy
See the Terms of Service and Privacy Notice, including Chrome extension and Browser Use data handling.
Contributing
Contributions are welcome! See CONTRIBUTING.md for guidelines.
Acknowledgments
This project was originally based on Google Gemini CLI v0.8.2. We gratefully acknowledge the Gemini CLI team's excellent work. Starting from Qwen Code v0.1, we stopped syncing with upstream and began independent development as a multi-protocol, multi-platform agent framework with deep integrations for Qwen models and beyond.