glslang

100.frag.out

Add missing non-square matrixCompMult built-in functions.

2013-11-22 17:52:58 +00:00

100Limits.vert.out

Track what ins/outs/uniforms are used, so that errors like "declare after use" or "can't use both XXX and YYY" can be issued. So far, used this for invariant, gl_FragColor et. al., and gl_FragCoord use before redeclaration.

2013-11-20 21:12:43 +00:00

100LimitsConf.vert.out

Implement ES 2.0 (version 100) limitations for non-inductive loop detection and array indexes needing "constant-index-expressions" (inductive variables and constant expressions).

2013-10-14 22:42:16 +00:00

100scope.vert.out

Track what ins/outs/uniforms are used, so that errors like "declare after use" or "can't use both XXX and YYY" can be issued. So far, used this for invariant, gl_FragColor et. al., and gl_FragCoord use before redeclaration.

2013-11-20 21:12:43 +00:00

120.frag.out

Add missing non-square matrixCompMult built-in functions.

2013-11-22 17:52:58 +00:00

120.vert.out

Track what ins/outs/uniforms are used, so that errors like "declare after use" or "can't use both XXX and YYY" can be issued. So far, used this for invariant, gl_FragColor et. al., and gl_FragCoord use before redeclaration.

2013-11-20 21:12:43 +00:00

130.frag.out

Correct textureGather*() extension support:

2013-11-23 21:10:51 +00:00

140.frag.out

Track what ins/outs/uniforms are used, so that errors like "declare after use" or "can't use both XXX and YYY" can be issued. So far, used this for invariant, gl_FragColor et. al., and gl_FragCoord use before redeclaration.

2013-11-20 21:12:43 +00:00

150.frag.out

Track what ins/outs/uniforms are used, so that errors like "declare after use" or "can't use both XXX and YYY" can be issued. So far, used this for invariant, gl_FragColor et. al., and gl_FragCoord use before redeclaration.

2013-11-20 21:12:43 +00:00

150.geom.out

Reflection: Expand out block arrays to N different blocks.

2013-11-21 00:54:57 +00:00

150.vert.out

Track what ins/outs/uniforms are used, so that errors like "declare after use" or "can't use both XXX and YYY" can be issued. So far, used this for invariant, gl_FragColor et. al., and gl_FragCoord use before redeclaration.

2013-11-20 21:12:43 +00:00

300.frag.out

Non-functional: missing test result and slight coding change from yesterday's constant folding check in.

2013-12-03 16:13:22 +00:00

300.vert.out

Fix logic error in steering which stages get bias vs. non-bias texturing functions.

2013-12-02 18:09:08 +00:00

300block.frag.out

Track what ins/outs/uniforms are used, so that errors like "declare after use" or "can't use both XXX and YYY" can be issued. So far, used this for invariant, gl_FragColor et. al., and gl_FragCoord use before redeclaration.

2013-11-20 21:12:43 +00:00

300BuiltIns.frag.out

Track what ins/outs/uniforms are used, so that errors like "declare after use" or "can't use both XXX and YYY" can be issued. So far, used this for invariant, gl_FragColor et. al., and gl_FragCoord use before redeclaration.

2013-11-20 21:12:43 +00:00

300layout.frag.out

Track what ins/outs/uniforms are used, so that errors like "declare after use" or "can't use both XXX and YYY" can be issued. So far, used this for invariant, gl_FragColor et. al., and gl_FragCoord use before redeclaration.

2013-11-20 21:12:43 +00:00

300layout.vert.out

Track what ins/outs/uniforms are used, so that errors like "declare after use" or "can't use both XXX and YYY" can be issued. So far, used this for invariant, gl_FragColor et. al., and gl_FragCoord use before redeclaration.

2013-11-20 21:12:43 +00:00

300link2.frag.out

Add ES 3.0 fragment output link-time test for outputs having or not having location qualifiers.

2013-10-15 21:46:20 +00:00

300link3.frag.out

Add ES 3.0 fragment output link-time test for outputs having or not having location qualifiers.

2013-10-15 21:46:20 +00:00

300link.frag.out

Add ES 3.0 fragment output link-time test for outputs having or not having location qualifiers.

2013-10-15 21:46:20 +00:00

300operations.frag.out

Track what ins/outs/uniforms are used, so that errors like "declare after use" or "can't use both XXX and YYY" can be issued. So far, used this for invariant, gl_FragColor et. al., and gl_FragCoord use before redeclaration.

2013-11-20 21:12:43 +00:00

300scope.vert.out

Track what ins/outs/uniforms are used, so that errors like "declare after use" or "can't use both XXX and YYY" can be issued. So far, used this for invariant, gl_FragColor et. al., and gl_FragCoord use before redeclaration.

2013-11-20 21:12:43 +00:00

330.frag.out

Track what ins/outs/uniforms are used, so that errors like "declare after use" or "can't use both XXX and YYY" can be issued. So far, used this for invariant, gl_FragColor et. al., and gl_FragCoord use before redeclaration.

2013-11-20 21:12:43 +00:00

330comp.frag.out

Track what ins/outs/uniforms are used, so that errors like "declare after use" or "can't use both XXX and YYY" can be issued. So far, used this for invariant, gl_FragColor et. al., and gl_FragCoord use before redeclaration.

2013-11-20 21:12:43 +00:00

400.frag.out

Correct textureGather*() extension support:

2013-11-23 21:10:51 +00:00

400.geom.out

Add link-time checks for max_vertices, input primitive, and output primitive for existence and matching.

2013-11-20 22:16:41 +00:00

400.tesc.out

Track what ins/outs/uniforms are used, so that errors like "declare after use" or "can't use both XXX and YYY" can be issued. So far, used this for invariant, gl_FragColor et. al., and gl_FragCoord use before redeclaration.

2013-11-20 21:12:43 +00:00

400.tese.out

Track what ins/outs/uniforms are used, so that errors like "declare after use" or "can't use both XXX and YYY" can be issued. So far, used this for invariant, gl_FragColor et. al., and gl_FragCoord use before redeclaration.

2013-11-20 21:12:43 +00:00

410.geom.out

Add link-time checks for max_vertices, input primitive, and output primitive for existence and matching.

2013-11-20 22:16:41 +00:00

420.geom.out

Add link-time checks for max_vertices, input primitive, and output primitive for existence and matching.

2013-11-20 22:16:41 +00:00

420.tese.out

Track what ins/outs/uniforms are used, so that errors like "declare after use" or "can't use both XXX and YYY" can be issued. So far, used this for invariant, gl_FragColor et. al., and gl_FragCoord use before redeclaration.

2013-11-20 21:12:43 +00:00

420.vert.out

Compile-time check on sampler binding size, link-time merging and checking of bindings.

2013-11-27 02:41:52 +00:00

430.comp.out

Track what ins/outs/uniforms are used, so that errors like "declare after use" or "can't use both XXX and YYY" can be issued. So far, used this for invariant, gl_FragColor et. al., and gl_FragCoord use before redeclaration.

2013-11-20 21:12:43 +00:00

430.vert.out

Track what ins/outs/uniforms are used, so that errors like "declare after use" or "can't use both XXX and YYY" can be issued. So far, used this for invariant, gl_FragColor et. al., and gl_FragCoord use before redeclaration.

2013-11-20 21:12:43 +00:00

430scope.vert.out

Track what ins/outs/uniforms are used, so that errors like "declare after use" or "can't use both XXX and YYY" can be issued. So far, used this for invariant, gl_FragColor et. al., and gl_FragCoord use before redeclaration.

2013-11-20 21:12:43 +00:00

aggOps.frag.out

Track what ins/outs/uniforms are used, so that errors like "declare after use" or "can't use both XXX and YYY" can be issued. So far, used this for invariant, gl_FragColor et. al., and gl_FragCoord use before redeclaration.

2013-11-20 21:12:43 +00:00

always-discard2.frag.out

Track what ins/outs/uniforms are used, so that errors like "declare after use" or "can't use both XXX and YYY" can be issued. So far, used this for invariant, gl_FragColor et. al., and gl_FragCoord use before redeclaration.

2013-11-20 21:12:43 +00:00

always-discard.frag.out

Track what ins/outs/uniforms are used, so that errors like "declare after use" or "can't use both XXX and YYY" can be issued. So far, used this for invariant, gl_FragColor et. al., and gl_FragCoord use before redeclaration.

2013-11-20 21:12:43 +00:00

array100.frag.out

Track what ins/outs/uniforms are used, so that errors like "declare after use" or "can't use both XXX and YYY" can be issued. So far, used this for invariant, gl_FragColor et. al., and gl_FragCoord use before redeclaration.

2013-11-20 21:12:43 +00:00

array.frag.out

Track what ins/outs/uniforms are used, so that errors like "declare after use" or "can't use both XXX and YYY" can be issued. So far, used this for invariant, gl_FragColor et. al., and gl_FragCoord use before redeclaration.

2013-11-20 21:12:43 +00:00

comment.frag.out

Track what ins/outs/uniforms are used, so that errors like "declare after use" or "can't use both XXX and YYY" can be issued. So far, used this for invariant, gl_FragColor et. al., and gl_FragCoord use before redeclaration.

2013-11-20 21:12:43 +00:00

conditionalDiscard.frag.out

Track what ins/outs/uniforms are used, so that errors like "declare after use" or "can't use both XXX and YYY" can be issued. So far, used this for invariant, gl_FragColor et. al., and gl_FragCoord use before redeclaration.

2013-11-20 21:12:43 +00:00

constErrors.frag.out

Track what ins/outs/uniforms are used, so that errors like "declare after use" or "can't use both XXX and YYY" can be issued. So far, used this for invariant, gl_FragColor et. al., and gl_FragCoord use before redeclaration.

2013-11-20 21:12:43 +00:00

constFold.frag.out

Track what ins/outs/uniforms are used, so that errors like "declare after use" or "can't use both XXX and YYY" can be issued. So far, used this for invariant, gl_FragColor et. al., and gl_FragCoord use before redeclaration.

2013-11-20 21:12:43 +00:00

conversion.frag.out

Track what ins/outs/uniforms are used, so that errors like "declare after use" or "can't use both XXX and YYY" can be issued. So far, used this for invariant, gl_FragColor et. al., and gl_FragCoord use before redeclaration.

2013-11-20 21:12:43 +00:00

cppComplexExpr.vert.out

Preprocessor fixes:

2013-12-02 15:56:38 +00:00

cppIndent.vert.out

Track what ins/outs/uniforms are used, so that errors like "declare after use" or "can't use both XXX and YYY" can be issued. So far, used this for invariant, gl_FragColor et. al., and gl_FragCoord use before redeclaration.

2013-11-20 21:12:43 +00:00

cppNest.vert.out

Track what ins/outs/uniforms are used, so that errors like "declare after use" or "can't use both XXX and YYY" can be issued. So far, used this for invariant, gl_FragColor et. al., and gl_FragCoord use before redeclaration.

2013-11-20 21:12:43 +00:00

cppSimple.vert.out

Add #line functionality to allow expressions instead of just literals. Also made some preprocessor code slightly more clear.

2013-12-03 17:19:03 +00:00

dataOut.frag.out

Track what ins/outs/uniforms are used, so that errors like "declare after use" or "can't use both XXX and YYY" can be issued. So far, used this for invariant, gl_FragColor et. al., and gl_FragCoord use before redeclaration.

2013-11-20 21:12:43 +00:00

dataOutIndirect.frag.out

Track what ins/outs/uniforms are used, so that errors like "declare after use" or "can't use both XXX and YYY" can be issued. So far, used this for invariant, gl_FragColor et. al., and gl_FragCoord use before redeclaration.

2013-11-20 21:12:43 +00:00

dce.frag.out

Track what ins/outs/uniforms are used, so that errors like "declare after use" or "can't use both XXX and YYY" can be issued. So far, used this for invariant, gl_FragColor et. al., and gl_FragCoord use before redeclaration.

2013-11-20 21:12:43 +00:00

decls.frag.out

Track what ins/outs/uniforms are used, so that errors like "declare after use" or "can't use both XXX and YYY" can be issued. So far, used this for invariant, gl_FragColor et. al., and gl_FragCoord use before redeclaration.

2013-11-20 21:12:43 +00:00

deepRvalue.frag.out

Track what ins/outs/uniforms are used, so that errors like "declare after use" or "can't use both XXX and YYY" can be issued. So far, used this for invariant, gl_FragColor et. al., and gl_FragCoord use before redeclaration.

2013-11-20 21:12:43 +00:00

depthOut.frag.out

Track what ins/outs/uniforms are used, so that errors like "declare after use" or "can't use both XXX and YYY" can be issued. So far, used this for invariant, gl_FragColor et. al., and gl_FragCoord use before redeclaration.

2013-11-20 21:12:43 +00:00

discard-dce.frag.out

Track what ins/outs/uniforms are used, so that errors like "declare after use" or "can't use both XXX and YYY" can be issued. So far, used this for invariant, gl_FragColor et. al., and gl_FragCoord use before redeclaration.

2013-11-20 21:12:43 +00:00

doWhileLoop.frag.out

Track what ins/outs/uniforms are used, so that errors like "declare after use" or "can't use both XXX and YYY" can be issued. So far, used this for invariant, gl_FragColor et. al., and gl_FragCoord use before redeclaration.

2013-11-20 21:12:43 +00:00

earlyReturnDiscard.frag.out

Track what ins/outs/uniforms are used, so that errors like "declare after use" or "can't use both XXX and YYY" can be issued. So far, used this for invariant, gl_FragColor et. al., and gl_FragCoord use before redeclaration.

2013-11-20 21:12:43 +00:00

empty.frag.out

Stop emitting the "#version missing" warning, and hook up the existing "suppress warnings" to a command-line option (-w).

2013-11-07 17:44:20 +00:00

errors.frag.out

Track what ins/outs/uniforms are used, so that errors like "declare after use" or "can't use both XXX and YYY" can be issued. So far, used this for invariant, gl_FragColor et. al., and gl_FragCoord use before redeclaration.

2013-11-20 21:12:43 +00:00

flowControl.frag.out

Track what ins/outs/uniforms are used, so that errors like "declare after use" or "can't use both XXX and YYY" can be issued. So far, used this for invariant, gl_FragColor et. al., and gl_FragCoord use before redeclaration.

2013-11-20 21:12:43 +00:00

forLoop.frag.out

Track what ins/outs/uniforms are used, so that errors like "declare after use" or "can't use both XXX and YYY" can be issued. So far, used this for invariant, gl_FragColor et. al., and gl_FragCoord use before redeclaration.

2013-11-20 21:12:43 +00:00

forwardRef.frag.out

Track what ins/outs/uniforms are used, so that errors like "declare after use" or "can't use both XXX and YYY" can be issued. So far, used this for invariant, gl_FragColor et. al., and gl_FragCoord use before redeclaration.

2013-11-20 21:12:43 +00:00

functionCall.frag.out

Track what ins/outs/uniforms are used, so that errors like "declare after use" or "can't use both XXX and YYY" can be issued. So far, used this for invariant, gl_FragColor et. al., and gl_FragCoord use before redeclaration.

2013-11-20 21:12:43 +00:00

functionSemantics.frag.out

Track what ins/outs/uniforms are used, so that errors like "declare after use" or "can't use both XXX and YYY" can be issued. So far, used this for invariant, gl_FragColor et. al., and gl_FragCoord use before redeclaration.

2013-11-20 21:12:43 +00:00

length.frag.out

Track what ins/outs/uniforms are used, so that errors like "declare after use" or "can't use both XXX and YYY" can be issued. So far, used this for invariant, gl_FragColor et. al., and gl_FragCoord use before redeclaration.

2013-11-20 21:12:43 +00:00

lineContinuation100.vert.out

Track what ins/outs/uniforms are used, so that errors like "declare after use" or "can't use both XXX and YYY" can be issued. So far, used this for invariant, gl_FragColor et. al., and gl_FragCoord use before redeclaration.

2013-11-20 21:12:43 +00:00

lineContinuation.vert.out

Track what ins/outs/uniforms are used, so that errors like "declare after use" or "can't use both XXX and YYY" can be issued. So far, used this for invariant, gl_FragColor et. al., and gl_FragCoord use before redeclaration.

2013-11-20 21:12:43 +00:00

link1.frag.out

Fix bug where bracket dereferences were incorrectly keeping the base's qualifier (for example constBase[i] would still be a const instead of EvqTemporary).

2013-10-28 19:49:16 +00:00

localAggregates.frag.out

Track what ins/outs/uniforms are used, so that errors like "declare after use" or "can't use both XXX and YYY" can be issued. So far, used this for invariant, gl_FragColor et. al., and gl_FragCoord use before redeclaration.

2013-11-20 21:12:43 +00:00

loops.frag.out

Track what ins/outs/uniforms are used, so that errors like "declare after use" or "can't use both XXX and YYY" can be issued. So far, used this for invariant, gl_FragColor et. al., and gl_FragCoord use before redeclaration.

2013-11-20 21:12:43 +00:00

loopsArtificial.frag.out

Track what ins/outs/uniforms are used, so that errors like "declare after use" or "can't use both XXX and YYY" can be issued. So far, used this for invariant, gl_FragColor et. al., and gl_FragCoord use before redeclaration.

2013-11-20 21:12:43 +00:00

mains1.frag.out

Add link-time checks for max_vertices, input primitive, and output primitive for existence and matching.

2013-11-20 22:16:41 +00:00

matrix2.frag.out

Track what ins/outs/uniforms are used, so that errors like "declare after use" or "can't use both XXX and YYY" can be issued. So far, used this for invariant, gl_FragColor et. al., and gl_FragCoord use before redeclaration.

2013-11-20 21:12:43 +00:00

matrix.frag.out

Track what ins/outs/uniforms are used, so that errors like "declare after use" or "can't use both XXX and YYY" can be issued. So far, used this for invariant, gl_FragColor et. al., and gl_FragCoord use before redeclaration.

2013-11-20 21:12:43 +00:00

matrixError.vert.out

Track what ins/outs/uniforms are used, so that errors like "declare after use" or "can't use both XXX and YYY" can be issued. So far, used this for invariant, gl_FragColor et. al., and gl_FragCoord use before redeclaration.

2013-11-20 21:12:43 +00:00

newTexture.frag.out

Add limit checking for constant texture texel offsets and max_vertices.

2013-11-20 23:46:57 +00:00

noMain.vert.out

Add basic intra-stage linking validation for matching types and qualification of uniforms/ins/outs/globals, function body duplication, and mixing ES/non-ES shaders.

2013-09-24 21:18:46 +00:00

nonSquare.vert.out

Track what ins/outs/uniforms are used, so that errors like "declare after use" or "can't use both XXX and YYY" can be issued. So far, used this for invariant, gl_FragColor et. al., and gl_FragCoord use before redeclaration.

2013-11-20 21:12:43 +00:00

numeral.frag.out

Track what ins/outs/uniforms are used, so that errors like "declare after use" or "can't use both XXX and YYY" can be issued. So far, used this for invariant, gl_FragColor et. al., and gl_FragCoord use before redeclaration.

2013-11-20 21:12:43 +00:00

Operations.frag.out

Track what ins/outs/uniforms are used, so that errors like "declare after use" or "can't use both XXX and YYY" can be issued. So far, used this for invariant, gl_FragColor et. al., and gl_FragCoord use before redeclaration.

2013-11-20 21:12:43 +00:00

pointCoord.frag.out

Track what ins/outs/uniforms are used, so that errors like "declare after use" or "can't use both XXX and YYY" can be issued. So far, used this for invariant, gl_FragColor et. al., and gl_FragCoord use before redeclaration.

2013-11-20 21:12:43 +00:00

precision.frag.out

Track what ins/outs/uniforms are used, so that errors like "declare after use" or "can't use both XXX and YYY" can be issued. So far, used this for invariant, gl_FragColor et. al., and gl_FragCoord use before redeclaration.

2013-11-20 21:12:43 +00:00

precision.vert.out

Track what ins/outs/uniforms are used, so that errors like "declare after use" or "can't use both XXX and YYY" can be issued. So far, used this for invariant, gl_FragColor et. al., and gl_FragCoord use before redeclaration.

2013-11-20 21:12:43 +00:00

prepost.frag.out

Track what ins/outs/uniforms are used, so that errors like "declare after use" or "can't use both XXX and YYY" can be issued. So far, used this for invariant, gl_FragColor et. al., and gl_FragCoord use before redeclaration.

2013-11-20 21:12:43 +00:00

recurse1.vert.out

Fix recursion detection (it was detecting cycles in the call graph that were not directed cycles).

2013-10-30 01:22:04 +00:00

reflection.vert.out

Reflection: Eliminate redundant arrayed block entries, and use block name instead of instance name for active uniform enumeration.

2013-11-23 00:44:18 +00:00

sample.frag.out

Track what ins/outs/uniforms are used, so that errors like "declare after use" or "can't use both XXX and YYY" can be issued. So far, used this for invariant, gl_FragColor et. al., and gl_FragCoord use before redeclaration.

2013-11-20 21:12:43 +00:00

sample.vert.out

Track what ins/outs/uniforms are used, so that errors like "declare after use" or "can't use both XXX and YYY" can be issued. So far, used this for invariant, gl_FragColor et. al., and gl_FragCoord use before redeclaration.

2013-11-20 21:12:43 +00:00

simpleFunctionCall.frag.out

Track what ins/outs/uniforms are used, so that errors like "declare after use" or "can't use both XXX and YYY" can be issued. So far, used this for invariant, gl_FragColor et. al., and gl_FragCoord use before redeclaration.

2013-11-20 21:12:43 +00:00

specExamples.frag.out

Track what ins/outs/uniforms are used, so that errors like "declare after use" or "can't use both XXX and YYY" can be issued. So far, used this for invariant, gl_FragColor et. al., and gl_FragCoord use before redeclaration.

2013-11-20 21:12:43 +00:00

specExamples.vert.out

Track what ins/outs/uniforms are used, so that errors like "declare after use" or "can't use both XXX and YYY" can be issued. So far, used this for invariant, gl_FragColor et. al., and gl_FragCoord use before redeclaration.

2013-11-20 21:12:43 +00:00

structAssignment.frag.out

Track what ins/outs/uniforms are used, so that errors like "declare after use" or "can't use both XXX and YYY" can be issued. So far, used this for invariant, gl_FragColor et. al., and gl_FragCoord use before redeclaration.

2013-11-20 21:12:43 +00:00

structDeref.frag.out

Track what ins/outs/uniforms are used, so that errors like "declare after use" or "can't use both XXX and YYY" can be issued. So far, used this for invariant, gl_FragColor et. al., and gl_FragCoord use before redeclaration.

2013-11-20 21:12:43 +00:00

structure.frag.out

Track what ins/outs/uniforms are used, so that errors like "declare after use" or "can't use both XXX and YYY" can be issued. So far, used this for invariant, gl_FragColor et. al., and gl_FragCoord use before redeclaration.

2013-11-20 21:12:43 +00:00

switch.frag.out

Track what ins/outs/uniforms are used, so that errors like "declare after use" or "can't use both XXX and YYY" can be issued. So far, used this for invariant, gl_FragColor et. al., and gl_FragCoord use before redeclaration.

2013-11-20 21:12:43 +00:00

swizzle.frag.out

Track what ins/outs/uniforms are used, so that errors like "declare after use" or "can't use both XXX and YYY" can be issued. So far, used this for invariant, gl_FragColor et. al., and gl_FragCoord use before redeclaration.

2013-11-20 21:12:43 +00:00

syntaxError.frag.out

Track what ins/outs/uniforms are used, so that errors like "declare after use" or "can't use both XXX and YYY" can be issued. So far, used this for invariant, gl_FragColor et. al., and gl_FragCoord use before redeclaration.

2013-11-20 21:12:43 +00:00

test.conf

Add built-in constants through version 440. Some still need to be consumed when initializing the symbol table.

2013-10-22 01:50:39 +00:00

test.frag.out

Track what ins/outs/uniforms are used, so that errors like "declare after use" or "can't use both XXX and YYY" can be issued. So far, used this for invariant, gl_FragColor et. al., and gl_FragCoord use before redeclaration.

2013-11-20 21:12:43 +00:00

texture.frag.out

Add limit checking for constant texture texel offsets and max_vertices.

2013-11-20 23:46:57 +00:00

tokenLength.vert.out

Track what ins/outs/uniforms are used, so that errors like "declare after use" or "can't use both XXX and YYY" can be issued. So far, used this for invariant, gl_FragColor et. al., and gl_FragCoord use before redeclaration.

2013-11-20 21:12:43 +00:00

types.frag.out

Track what ins/outs/uniforms are used, so that errors like "declare after use" or "can't use both XXX and YYY" can be issued. So far, used this for invariant, gl_FragColor et. al., and gl_FragCoord use before redeclaration.

2013-11-20 21:12:43 +00:00

uint.frag.out

Track what ins/outs/uniforms are used, so that errors like "declare after use" or "can't use both XXX and YYY" can be issued. So far, used this for invariant, gl_FragColor et. al., and gl_FragCoord use before redeclaration.

2013-11-20 21:12:43 +00:00

uniformArray.frag.out

Track what ins/outs/uniforms are used, so that errors like "declare after use" or "can't use both XXX and YYY" can be issued. So far, used this for invariant, gl_FragColor et. al., and gl_FragCoord use before redeclaration.

2013-11-20 21:12:43 +00:00

variableArrayIndex.frag.out

Track what ins/outs/uniforms are used, so that errors like "declare after use" or "can't use both XXX and YYY" can be issued. So far, used this for invariant, gl_FragColor et. al., and gl_FragCoord use before redeclaration.

2013-11-20 21:12:43 +00:00

varyingArray.frag.out

Track what ins/outs/uniforms are used, so that errors like "declare after use" or "can't use both XXX and YYY" can be issued. So far, used this for invariant, gl_FragColor et. al., and gl_FragCoord use before redeclaration.

2013-11-20 21:12:43 +00:00

varyingArrayIndirect.frag.out

Track what ins/outs/uniforms are used, so that errors like "declare after use" or "can't use both XXX and YYY" can be issued. So far, used this for invariant, gl_FragColor et. al., and gl_FragCoord use before redeclaration.

2013-11-20 21:12:43 +00:00

versionsClean.frag.out

Track what ins/outs/uniforms are used, so that errors like "declare after use" or "can't use both XXX and YYY" can be issued. So far, used this for invariant, gl_FragColor et. al., and gl_FragCoord use before redeclaration.

2013-11-20 21:12:43 +00:00

versionsClean.vert.out

Track what ins/outs/uniforms are used, so that errors like "declare after use" or "can't use both XXX and YYY" can be issued. So far, used this for invariant, gl_FragColor et. al., and gl_FragCoord use before redeclaration.

2013-11-20 21:12:43 +00:00

versionsErrors.frag.out

Correct textureGather*() extension support:

2013-11-23 21:10:51 +00:00

versionsErrors.vert.out

Track what ins/outs/uniforms are used, so that errors like "declare after use" or "can't use both XXX and YYY" can be issued. So far, used this for invariant, gl_FragColor et. al., and gl_FragCoord use before redeclaration.

2013-11-20 21:12:43 +00:00

voidFunction.frag.out

Track what ins/outs/uniforms are used, so that errors like "declare after use" or "can't use both XXX and YYY" can be issued. So far, used this for invariant, gl_FragColor et. al., and gl_FragCoord use before redeclaration.

2013-11-20 21:12:43 +00:00

whileLoop.frag.out

Track what ins/outs/uniforms are used, so that errors like "declare after use" or "can't use both XXX and YYY" can be issued. So far, used this for invariant, gl_FragColor et. al., and gl_FragCoord use before redeclaration.

2013-11-20 21:12:43 +00:00