mirror of
https://github.com/RPCS3/llvm-mirror.git
synced 2024-11-26 04:40:38 +00:00
[FileCheck] Make FILECHECK_OPTS useful for its test suite
Without this patch, `FILECHECK_OPTS` isn't propagated to FileCheck's test suite so that `FILECHECK_OPTS` doesn't inadvertently affect test results by affecting the output of FileCheck calls under test. As a result, `FILECHECK_OPTS` is useless for debugging FileCheck's test suite. In `llvm/test/FileCheck/lit.local.cfg`, this patch provides a new subsitution, `%ProtectFileCheckOutput`, to address this problem for both `FILECHECK_OPTS` and the deprecated `FILECHECK_DUMP_INPUT_ON_FAILURE`. The rest of the patch uses `%ProtectFileCheckOutput` throughout the test suite Fixes PR40284. Reviewed By: probinson, thopre Differential Revision: https://reviews.llvm.org/D65121
This commit is contained in:
Joel E. Denny
parent
51e57e895e
commit
dd1fd5b646
@ -549,6 +549,13 @@ RUN lines:
|
||||
``i686-pc-mingw32``. This allows a test to run with a specific ABI without
|
||||
constraining it to a specific triple.
|
||||
|
||||
**FileCheck-specific substitutions:**
|
||||
|
||||
``%ProtectFileCheckOutput``
|
||||
This should precede a ``FileCheck`` call if and only if the call's textual
|
||||
output affects test results. It's usually easy to tell: just look for
|
||||
redirection or piping of the ``FileCheck`` call's stdout or stderr.
|
||||
|
||||
To add more substituations, look at ``test/lit.cfg`` or ``lit.local.cfg``.
|
||||
|
||||
|
||||
|
||||
@ -4,19 +4,27 @@
|
||||
|
||||
this is something else
|
||||
|
||||
; RUN: not FileCheck %s --input-file %s --check-prefix=CHECK-ERR1 2>&1 | FileCheck %s --check-prefix=ERRCOUNT1
|
||||
; RUN: %ProtectFileCheckOutput \
|
||||
; RUN: not FileCheck %s --input-file %s --check-prefix=CHECK-ERR1 2>&1 \
|
||||
; RUN: | FileCheck %s --check-prefix=ERRCOUNT1
|
||||
CHECK-ERR1-COUNT-xx: this
|
||||
ERRCOUNT1: [[@LINE-1]]:18: error: invalid count in -COUNT specification on prefix 'CHECK-ERR1'
|
||||
|
||||
; RUN: not FileCheck %s --input-file %s --check-prefix=CHECK-ERR2 2>&1 | FileCheck %s --check-prefix=ERRCOUNT2
|
||||
; RUN: %ProtectFileCheckOutput \
|
||||
; RUN: not FileCheck %s --input-file %s --check-prefix=CHECK-ERR2 2>&1 \
|
||||
; RUN: | FileCheck %s --check-prefix=ERRCOUNT2
|
||||
CHECK-ERR2-COUNT-0x1: something
|
||||
ERRCOUNT2: [[@LINE-1]]:19: error: invalid count in -COUNT specification on prefix 'CHECK-ERR2'
|
||||
|
||||
; RUN: not FileCheck %s --input-file %s --check-prefix=CHECK-ERR3 2>&1 | FileCheck %s --check-prefix=ERRCOUNT3
|
||||
; RUN: %ProtectFileCheckOutput \
|
||||
; RUN: not FileCheck %s --input-file %s --check-prefix=CHECK-ERR3 2>&1 \
|
||||
; RUN: | FileCheck %s --check-prefix=ERRCOUNT3
|
||||
CHECK-ERR3-COUNT-100x: else
|
||||
ERRCOUNT3: [[@LINE-1]]:21: error: invalid count in -COUNT specification on prefix 'CHECK-ERR3'
|
||||
|
||||
; RUN: not FileCheck %s --input-file %s --check-prefix=CHECK-ERR4 2>&1 | FileCheck %s --check-prefix=ERRCOUNT4
|
||||
; RUN: %ProtectFileCheckOutput \
|
||||
; RUN: not FileCheck %s --input-file %s --check-prefix=CHECK-ERR4 2>&1 \
|
||||
; RUN: | FileCheck %s --check-prefix=ERRCOUNT4
|
||||
CHECK-ERR4-COUNT-0: else
|
||||
ERRCOUNT4: [[@LINE-1]]:19: error: invalid count in -COUNT specification on prefix 'CHECK-ERR4'
|
||||
|
||||
@ -80,17 +88,23 @@ CHECK-CNTMANY-EMPTY:
|
||||
; Tests on mismatches:
|
||||
;
|
||||
|
||||
; RUN: not FileCheck %s --input-file %s --check-prefix=CHECK-MIS1 2>&1 | FileCheck %s --check-prefix=MISCOUNT1
|
||||
; RUN: %ProtectFileCheckOutput \
|
||||
; RUN: not FileCheck %s --input-file %s --check-prefix=CHECK-MIS1 2>&1 \
|
||||
; RUN: | FileCheck %s --check-prefix=MISCOUNT1
|
||||
CHECK-MIS1-COUNT-3: this is duplicate
|
||||
CHECK-MIS1: {{^}}this is not duplicate
|
||||
MISCOUNT1: [[@LINE-1]]:13: error: CHECK-MIS1: expected string not found in input
|
||||
|
||||
; RUN: not FileCheck %s --input-file %s --check-prefix=CHECK-MIS2 2>&1 | FileCheck %s --check-prefix=MISCOUNT2
|
||||
; RUN: %ProtectFileCheckOutput \
|
||||
; RUN: not FileCheck %s --input-file %s --check-prefix=CHECK-MIS2 2>&1 \
|
||||
; RUN: | FileCheck %s --check-prefix=MISCOUNT2
|
||||
CHECK-MIS2-COUNT-10: {{^this is duplicate}}
|
||||
CHECK-MIS2: {{^}}this is not duplicate
|
||||
MISCOUNT2: [[@LINE-2]]:22: error: CHECK-MIS2-COUNT: expected string not found in input
|
||||
|
||||
; RUN: not FileCheck %s --input-file %s --check-prefix=CHECK-MIS3 2>&1 | FileCheck %s --check-prefix=MISCOUNT3
|
||||
; RUN: %ProtectFileCheckOutput \
|
||||
; RUN: not FileCheck %s --input-file %s --check-prefix=CHECK-MIS3 2>&1 \
|
||||
; RUN: | FileCheck %s --check-prefix=MISCOUNT3
|
||||
CHECK-MIS3-COUNT-5: this is duplicate
|
||||
CHECK-MIS3-EMPTY:
|
||||
CHECK-MIS3-LABEL: Many-label:
|
||||
|
||||
@ -8,32 +8,44 @@ CHECK1-EMPTY:
|
||||
CHECK1-NEXT: bar
|
||||
|
||||
; next line must be blank
|
||||
; RUN: not FileCheck %s --input-file %s --check-prefix=CHECK2A 2>&1 | FileCheck %s --check-prefix=CHECK2B
|
||||
; RUN: %ProtectFileCheckOutput \
|
||||
; RUN: not FileCheck %s --input-file %s --check-prefix=CHECK2A 2>&1 \
|
||||
; RUN: | FileCheck %s --check-prefix=CHECK2B
|
||||
badger
|
||||
CHECK2A: badger
|
||||
CHECK2A-EMPTY:
|
||||
CHECK2B: CHECK2A-EMPTY: is not on the line after the previous match
|
||||
|
||||
; CHECK-EMPTY must have empty pattern
|
||||
; RUN: not FileCheck %s --input-file %s --check-prefix=CHECK3A 2>&1 | FileCheck %s --check-prefix=CHECK3B
|
||||
; RUN: %ProtectFileCheckOutput \
|
||||
; RUN: not FileCheck %s --input-file %s --check-prefix=CHECK3A 2>&1 \
|
||||
; RUN: | FileCheck %s --check-prefix=CHECK3B
|
||||
CHECK3A: foo
|
||||
CHECK3A-EMPTY: this is not empty
|
||||
CHECK3B: found non-empty check string for empty check with prefix 'CHECK3A:'
|
||||
|
||||
; CHECK-EMPTY cannot be the first check
|
||||
; RUN: not FileCheck %s --input-file %s --check-prefix=CHECK4A 2>&1 | FileCheck %s --check-prefix=CHECK4B
|
||||
; RUN: %ProtectFileCheckOutput \
|
||||
; RUN: not FileCheck %s --input-file %s --check-prefix=CHECK4A 2>&1 \
|
||||
; RUN: | FileCheck %s --check-prefix=CHECK4B
|
||||
CHECK4A-EMPTY:
|
||||
CHECK4B: found 'CHECK4A-EMPTY' without previous 'CHECK4A: line
|
||||
|
||||
; CHECK-EMPTY-NOT and CHECK-NOT-EMPTY rejected
|
||||
; RUN: not FileCheck %s --input-file %s --check-prefixes=CHECK5A 2>&1 | FileCheck %s --check-prefix=CHECK5C
|
||||
; RUN: not FileCheck %s --input-file %s --check-prefixes=CHECK5B 2>&1 | FileCheck %s --check-prefix=CHECK5C
|
||||
; RUN: %ProtectFileCheckOutput \
|
||||
; RUN: not FileCheck %s --input-file %s --check-prefixes=CHECK5A 2>&1 \
|
||||
; RUN: | FileCheck %s --check-prefix=CHECK5C
|
||||
; RUN: %ProtectFileCheckOutput \
|
||||
; RUN: not FileCheck %s --input-file %s --check-prefixes=CHECK5B 2>&1 \
|
||||
; RUN: | FileCheck %s --check-prefix=CHECK5C
|
||||
CHECK5A-EMPTY-NOT:
|
||||
CHECK5B-NOT-EMPTY:
|
||||
CHECK5C: unsupported -NOT combo on prefix 'CHECK5{{A|B}}'
|
||||
|
||||
; whitespace does not count as empty
|
||||
; RUN: not FileCheck %s --input-file %s --check-prefix=CHECK6A --match-full-lines 2>&1 | FileCheck %s --check-prefix=CHECK6B
|
||||
; RUN: %ProtectFileCheckOutput \
|
||||
; RUN: not FileCheck %s --input-file %s --check-prefix=CHECK6A --match-full-lines \
|
||||
; RUN: 2>&1 | FileCheck %s --check-prefix=CHECK6B
|
||||
CHECK6A: the next line has spaces
|
||||
CHECK6A-EMPTY:
|
||||
CHECK6B: expected string not found in input
|
||||
|
||||
@ -1,7 +1,18 @@
|
||||
// RUN: not FileCheck -check-prefix=FOO %s </dev/null 2>&1 | FileCheck -check-prefix=EMPTY-ERR %s
|
||||
// RUN: not FileCheck -check-prefix=NOFOO %s </dev/null 2>&1 | FileCheck -check-prefix=EMPTY-ERR %s
|
||||
// RUN: not FileCheck -check-prefix=FOO -allow-empty %s </dev/null 2>&1 | FileCheck -check-prefix=NO-EMPTY-ERR -check-prefix=NOT-FOUND %s
|
||||
// RUN: FileCheck -check-prefix=NOFOO -allow-empty %s </dev/null 2>&1 | FileCheck -allow-empty -check-prefix=NO-EMPTY-ERR %s
|
||||
// RUN: %ProtectFileCheckOutput \
|
||||
// RUN: not FileCheck -check-prefix=FOO %s </dev/null 2>&1 \
|
||||
// RUN: | FileCheck -check-prefix=EMPTY-ERR %s
|
||||
//
|
||||
// RUN: %ProtectFileCheckOutput \
|
||||
// RUN: not FileCheck -check-prefix=NOFOO %s </dev/null 2>&1 \
|
||||
// RUN: | FileCheck -check-prefix=EMPTY-ERR %s
|
||||
//
|
||||
// RUN: %ProtectFileCheckOutput \
|
||||
// RUN: not FileCheck -check-prefix=FOO -allow-empty %s </dev/null 2>&1 \
|
||||
// RUN: | FileCheck -check-prefix=NO-EMPTY-ERR -check-prefix=NOT-FOUND %s
|
||||
//
|
||||
// RUN: %ProtectFileCheckOutput \
|
||||
// RUN: FileCheck -check-prefix=NOFOO -allow-empty %s </dev/null 2>&1 \
|
||||
// RUN: | FileCheck -allow-empty -check-prefix=NO-EMPTY-ERR %s
|
||||
|
||||
; FOO: foo
|
||||
; NOFOO-NOT: foo
|
||||
|
||||
@ -15,7 +15,10 @@
|
||||
|
||||
## Check that option --implicit-not works case insensitively.
|
||||
# RUN: sed '/^#/d' %s | FileCheck --implicit-check-not=sTrInG %s
|
||||
# RUN: sed '/^#/d' %s | not FileCheck --ignore-case --implicit-check-not=sTrInG %s 2>&1 | FileCheck --check-prefix=ERROR %s
|
||||
# RUN: sed '/^#/d' %s \
|
||||
# RUN: | %ProtectFileCheckOutput \
|
||||
# RUN: not FileCheck --ignore-case --implicit-check-not=sTrInG %s 2>&1 \
|
||||
# RUN: | FileCheck --check-prefix=ERROR %s
|
||||
|
||||
this is the STRING to be matched
|
||||
|
||||
|
||||
@ -1,4 +1,5 @@
|
||||
; RUN: not FileCheck -input-file %s %s 2>&1 | FileCheck --check-prefix=ERROR %s
|
||||
; RUN: %ProtectFileCheckOutput not FileCheck -input-file %s %s 2>&1 \
|
||||
; RUN: | FileCheck --check-prefix=ERROR %s
|
||||
|
||||
bar
|
||||
zed
|
||||
|
||||
@ -1,5 +1,8 @@
|
||||
; RUN: FileCheck -input-file %s %s -check-prefix=CHECKOK
|
||||
; RUN: not FileCheck -input-file %s %s -check-prefix=CHECKFAIL 2>&1 | FileCheck %s -check-prefix=CHECKERROR
|
||||
;
|
||||
; RUN: %ProtectFileCheckOutput \
|
||||
; RUN: not FileCheck -input-file %s %s -check-prefix=CHECKFAIL 2>&1 \
|
||||
; RUN: | FileCheck %s -check-prefix=CHECKERROR
|
||||
|
||||
label0:
|
||||
a
|
||||
|
||||
@ -1,6 +1,14 @@
|
||||
; RUN: not FileCheck -input-file %s %s -check-prefix=FOO -check-prefix=BAR 2>&1 | FileCheck %s
|
||||
; RUN: not FileCheck -input-file %s %s -check-prefixes=FOO,BAR 2>&1 | FileCheck %s
|
||||
; RUN: not FileCheck -input-file %s %s -check-prefixes=BAR,FOO 2>&1 | FileCheck %s
|
||||
; RUN: %ProtectFileCheckOutput \
|
||||
; RUN: not FileCheck -input-file %s %s -check-prefix=FOO -check-prefix=BAR \
|
||||
; RUN: 2>&1 | FileCheck %s
|
||||
;
|
||||
; RUN: %ProtectFileCheckOutput \
|
||||
; RUN: not FileCheck -input-file %s %s -check-prefixes=FOO,BAR 2>&1 \
|
||||
; RUN: | FileCheck %s
|
||||
;
|
||||
; RUN: %ProtectFileCheckOutput \
|
||||
; RUN: not FileCheck -input-file %s %s -check-prefixes=BAR,FOO 2>&1 \
|
||||
; RUN: | FileCheck %s
|
||||
|
||||
fog
|
||||
bar
|
||||
|
||||
@ -1,6 +1,14 @@
|
||||
; RUN: not FileCheck -input-file %s %s -check-prefix=FOO -check-prefix=BAR 2>&1 | FileCheck %s
|
||||
; RUN: not FileCheck -input-file %s %s -check-prefixes=FOO,BAR 2>&1 | FileCheck %s
|
||||
; RUN: not FileCheck -input-file %s %s -check-prefixes=BAR,FOO 2>&1 | FileCheck %s
|
||||
; RUN: %ProtectFileCheckOutput \
|
||||
; RUN: not FileCheck -input-file %s %s -check-prefix=FOO -check-prefix=BAR \
|
||||
; RUN: 2>&1 | FileCheck %s
|
||||
;
|
||||
; RUN: %ProtectFileCheckOutput \
|
||||
; RUN: not FileCheck -input-file %s %s -check-prefixes=FOO,BAR 2>&1 \
|
||||
; RUN: | FileCheck %s
|
||||
;
|
||||
; RUN: %ProtectFileCheckOutput \
|
||||
; RUN: not FileCheck -input-file %s %s -check-prefixes=BAR,FOO 2>&1 \
|
||||
; RUN: | FileCheck %s
|
||||
|
||||
BAR
|
||||
bar
|
||||
|
||||
@ -1,4 +1,4 @@
|
||||
; RUN: not FileCheck --input-file %s %s 2>&1 \
|
||||
; RUN: %ProtectFileCheckOutput not FileCheck --input-file %s %s 2>&1 \
|
||||
; RUN: | FileCheck --strict-whitespace --check-prefix DIAG %s
|
||||
|
||||
CHECK-NOT: test
|
||||
|
||||
@ -1,5 +1,8 @@
|
||||
// RUN: FileCheck -check-prefix=ANOTHER-PREFIX -input-file %s %s
|
||||
// RUN: not FileCheck -check-prefix=PREFIX -input-file %s %s 2>&1 | FileCheck -check-prefix=CHECK-NONEXISTENT-PREFIX %s
|
||||
//
|
||||
// RUN: %ProtectFileCheckOutput \
|
||||
// RUN: not FileCheck -check-prefix=PREFIX -input-file %s %s 2>&1 \
|
||||
// RUN: | FileCheck -check-prefix=CHECK-NONEXISTENT-PREFIX %s
|
||||
|
||||
foobar
|
||||
; ANOTHER-PREFIX: foobar
|
||||
|
||||
@ -15,6 +15,7 @@
|
||||
; RUN: echo 'CHECK: hello' > %t.chk
|
||||
; RUN: echo 'CHECK: universe' >> %t.chk
|
||||
|
||||
; RUN: %ProtectFileCheckOutput \
|
||||
; RUN: not FileCheck -dump-input=always -input-file %t.in %t.chk -v 2>&1 \
|
||||
; RUN: | FileCheck -strict-whitespace -match-full-lines -check-prefix=ALIGN \
|
||||
; RUN: -implicit-check-not='remark:' %s
|
||||
@ -51,12 +52,15 @@
|
||||
; RUN: echo 'CHECK: hello' > %t.chk
|
||||
; RUN: echo 'CHECK: world' >> %t.chk
|
||||
|
||||
; RUN: %ProtectFileCheckOutput \
|
||||
; RUN: not FileCheck -dump-input=always -input-file %t.in %t.chk 2>&1 \
|
||||
; RUN: | FileCheck -match-full-lines %s -check-prefix=CHK \
|
||||
; RUN: -implicit-check-not='remark:'
|
||||
; RUN: %ProtectFileCheckOutput \
|
||||
; RUN: not FileCheck -dump-input=always -input-file %t.in %t.chk -v 2>&1 \
|
||||
; RUN: | FileCheck -match-full-lines %s -check-prefixes=CHK,CHK-V \
|
||||
; RUN: -implicit-check-not='remark:'
|
||||
; RUN: %ProtectFileCheckOutput \
|
||||
; RUN: not FileCheck -dump-input=always -input-file %t.in %t.chk -vv 2>&1 \
|
||||
; RUN: | FileCheck -match-full-lines %s -check-prefixes=CHK,CHK-V \
|
||||
; RUN: -implicit-check-not='remark:'
|
||||
@ -88,12 +92,15 @@
|
||||
|
||||
; RUN: echo 'CHECK-COUNT-3: pete' > %t.chk
|
||||
|
||||
; RUN: %ProtectFileCheckOutput \
|
||||
; RUN: not FileCheck -dump-input=always -input-file %t.in %t.chk 2>&1 \
|
||||
; RUN: | FileCheck -match-full-lines %s -check-prefixes=CNT,CNT-Q \
|
||||
; RUN: -implicit-check-not='remark:'
|
||||
; RUN: %ProtectFileCheckOutput \
|
||||
; RUN: not FileCheck -dump-input=always -input-file %t.in %t.chk -v 2>&1 \
|
||||
; RUN: | FileCheck -match-full-lines %s -check-prefixes=CNT,CNT-V \
|
||||
; RUN: -implicit-check-not='remark:'
|
||||
; RUN: %ProtectFileCheckOutput \
|
||||
; RUN: not FileCheck -dump-input=always -input-file %t.in %t.chk -vv 2>&1 \
|
||||
; RUN: | FileCheck -match-full-lines %s -check-prefixes=CNT,CNT-V \
|
||||
; RUN: -implicit-check-not='remark:'
|
||||
@ -125,12 +132,15 @@
|
||||
; RUN: echo 'CHECK-NEXT: again' >> %t.chk
|
||||
; RUN: echo 'CHECK-NEXT: world' >> %t.chk
|
||||
|
||||
; RUN: %ProtectFileCheckOutput \
|
||||
; RUN: not FileCheck -dump-input=always -input-file %t.in %t.chk 2>&1 \
|
||||
; RUN: | FileCheck -match-full-lines %s -check-prefix=NXT \
|
||||
; RUN: -implicit-check-not='remark:'
|
||||
; RUN: %ProtectFileCheckOutput \
|
||||
; RUN: not FileCheck -dump-input=always -input-file %t.in %t.chk -v 2>&1 \
|
||||
; RUN: | FileCheck -match-full-lines %s -check-prefixes=NXT,NXT-V \
|
||||
; RUN: -implicit-check-not='remark:'
|
||||
; RUN: %ProtectFileCheckOutput \
|
||||
; RUN: not FileCheck -dump-input=always -input-file %t.in %t.chk -vv 2>&1 \
|
||||
; RUN: | FileCheck -match-full-lines %s -check-prefixes=NXT,NXT-V,NXT-VV \
|
||||
; RUN: -implicit-check-not='remark:'
|
||||
@ -153,6 +163,7 @@
|
||||
; RUN: echo 'yonder' >> %t.in
|
||||
; RUN: echo 'world' >> %t.in
|
||||
|
||||
; RUN: %ProtectFileCheckOutput \
|
||||
; RUN: not FileCheck -dump-input=always -input-file %t.in %t.chk 2>&1 \
|
||||
; RUN: | FileCheck -match-full-lines %s -check-prefix=NXT2
|
||||
|
||||
@ -178,12 +189,15 @@
|
||||
; RUN: echo 'CHECK-SAME: world' >> %t.chk
|
||||
; RUN: echo 'CHECK-SAME: again' >> %t.chk
|
||||
|
||||
; RUN: %ProtectFileCheckOutput \
|
||||
; RUN: not FileCheck -dump-input=always -input-file %t.in %t.chk 2>&1 \
|
||||
; RUN: | FileCheck -match-full-lines %s -check-prefix=SAM \
|
||||
; RUN: -implicit-check-not='remark:'
|
||||
; RUN: %ProtectFileCheckOutput \
|
||||
; RUN: not FileCheck -dump-input=always -input-file %t.in %t.chk -v 2>&1 \
|
||||
; RUN: | FileCheck -match-full-lines %s -check-prefixes=SAM,SAM-V \
|
||||
; RUN: -implicit-check-not='remark:'
|
||||
; RUN: %ProtectFileCheckOutput \
|
||||
; RUN: not FileCheck -dump-input=always -input-file %t.in %t.chk -vv 2>&1 \
|
||||
; RUN: | FileCheck -match-full-lines %s -check-prefixes=SAM,SAM-V,SAM-VV \
|
||||
; RUN: -implicit-check-not='remark:'
|
||||
@ -203,6 +217,7 @@
|
||||
|
||||
; RUN: echo 'again' >> %t.in
|
||||
|
||||
; RUN: %ProtectFileCheckOutput \
|
||||
; RUN: not FileCheck -dump-input=always -input-file %t.in %t.chk -v 2>&1 \
|
||||
; RUN: | FileCheck -match-full-lines %s -check-prefixes=SAM2 \
|
||||
; RUN: -implicit-check-not='remark:'
|
||||
@ -241,12 +256,15 @@
|
||||
; RUN: echo 'CHECK-EMPTY:' >> %t.chk
|
||||
; RUN: echo 'CHECK-LABEL: label' >> %t.chk
|
||||
|
||||
; RUN: %ProtectFileCheckOutput \
|
||||
; RUN: not FileCheck -dump-input=always -input-file %t.in %t.chk 2>&1 \
|
||||
; RUN: | FileCheck -match-full-lines %s -check-prefix=EMP \
|
||||
; RUN: -implicit-check-not='remark:'
|
||||
; RUN: %ProtectFileCheckOutput \
|
||||
; RUN: not FileCheck -dump-input=always -input-file %t.in %t.chk -v 2>&1 \
|
||||
; RUN: | FileCheck -match-full-lines %s -check-prefixes=EMP,EMP-V \
|
||||
; RUN: -implicit-check-not='remark:'
|
||||
; RUN: %ProtectFileCheckOutput \
|
||||
; RUN: not FileCheck -dump-input=always -input-file %t.in %t.chk -vv 2>&1 \
|
||||
; RUN: | FileCheck -match-full-lines %s -check-prefixes=EMP,EMP-V,EMP-VV \
|
||||
; RUN: -implicit-check-not='remark:'
|
||||
@ -275,12 +293,15 @@
|
||||
; RUN: echo 'CHECK: hello' > %t.chk
|
||||
; RUN: echo 'CHECK-EMPTY:' >> %t.chk
|
||||
|
||||
; RUN: %ProtectFileCheckOutput \
|
||||
; RUN: not FileCheck -dump-input=always -input-file %t.in %t.chk 2>&1 \
|
||||
; RUN: | FileCheck -match-full-lines %s -check-prefix=EMP2 \
|
||||
; RUN: -implicit-check-not='remark:'
|
||||
; RUN: %ProtectFileCheckOutput \
|
||||
; RUN: not FileCheck -dump-input=always -input-file %t.in %t.chk -v 2>&1 \
|
||||
; RUN: | FileCheck -match-full-lines %s -check-prefixes=EMP2,EMP2-V \
|
||||
; RUN: -implicit-check-not='remark:'
|
||||
; RUN: %ProtectFileCheckOutput \
|
||||
; RUN: not FileCheck -dump-input=always -input-file %t.in %t.chk -vv 2>&1 \
|
||||
; RUN: | FileCheck -match-full-lines %s -check-prefixes=EMP2,EMP2-V,EMP2-VV \
|
||||
; RUN: -implicit-check-not='remark:'
|
||||
@ -310,12 +331,15 @@
|
||||
; RUN: echo 'CHECK-NOT: goodbye' > %t.chk
|
||||
; RUN: echo 'CHECK-NOT: world' >> %t.chk
|
||||
|
||||
; RUN: %ProtectFileCheckOutput \
|
||||
; RUN: not FileCheck -dump-input=always -input-file %t.in %t.chk 2>&1 \
|
||||
; RUN: | FileCheck -match-full-lines %s -check-prefix=NOT \
|
||||
; RUN: -implicit-check-not='remark:'
|
||||
; RUN: %ProtectFileCheckOutput \
|
||||
; RUN: not FileCheck -dump-input=always -input-file %t.in %t.chk -v 2>&1 \
|
||||
; RUN: | FileCheck -match-full-lines %s -check-prefixes=NOT,NOT-V \
|
||||
; RUN: -implicit-check-not='remark:'
|
||||
; RUN: %ProtectFileCheckOutput \
|
||||
; RUN: not FileCheck -dump-input=always -input-file %t.in %t.chk -vv 2>&1 \
|
||||
; RUN: | FileCheck -match-full-lines %s -check-prefixes=NOT,NOT-V,NOT-VV \
|
||||
; RUN: -implicit-check-not='remark:'
|
||||
@ -340,12 +364,15 @@
|
||||
|
||||
; RUN: echo 'CHECK: ain' >> %t.chk
|
||||
|
||||
; RUN: %ProtectFileCheckOutput \
|
||||
; RUN: not FileCheck -dump-input=always -input-file %t.in %t.chk 2>&1 \
|
||||
; RUN: | FileCheck -match-full-lines %s -check-prefix=NOT2 \
|
||||
; RUN: -implicit-check-not='remark:'
|
||||
; RUN: %ProtectFileCheckOutput \
|
||||
; RUN: not FileCheck -dump-input=always -input-file %t.in %t.chk -v 2>&1 \
|
||||
; RUN: | FileCheck -match-full-lines %s -check-prefixes=NOT2,NOT2-V \
|
||||
; RUN: -implicit-check-not='remark:'
|
||||
; RUN: %ProtectFileCheckOutput \
|
||||
; RUN: not FileCheck -dump-input=always -input-file %t.in %t.chk -vv 2>&1 \
|
||||
; RUN: | FileCheck -match-full-lines %s -check-prefixes=NOT2,NOT2-V,NOT2-VV \
|
||||
; RUN: -implicit-check-not='remark:'
|
||||
@ -387,12 +414,15 @@
|
||||
; DAG-VQ = -v and not -vv
|
||||
; DAG-VV = -vv
|
||||
|
||||
; RUN: %ProtectFileCheckOutput \
|
||||
; RUN: not FileCheck -dump-input=always -input-file %t.in %t.chk 2>&1 \
|
||||
; RUN: | FileCheck -match-full-lines %s -check-prefixes=DAG,DAG-Q \
|
||||
; RUN: -implicit-check-not='remark:'
|
||||
; RUN: %ProtectFileCheckOutput \
|
||||
; RUN: not FileCheck -dump-input=always -input-file %t.in %t.chk -v 2>&1 \
|
||||
; RUN: | FileCheck -match-full-lines %s -check-prefixes=DAG,DAG-V,DAG-VQ \
|
||||
; RUN: -implicit-check-not='remark:'
|
||||
; RUN: %ProtectFileCheckOutput \
|
||||
; RUN: not FileCheck -dump-input=always -input-file %t.in %t.chk -vv 2>&1 \
|
||||
; RUN: | FileCheck -match-full-lines %s -check-prefixes=DAG,DAG-V,DAG-VV \
|
||||
; RUN: -implicit-check-not='remark:'
|
||||
@ -434,12 +464,15 @@
|
||||
; RUN: echo 'CHECK: foo' >> %t.chk
|
||||
; RUN: echo 'CHECK-LABEL: lab2' >> %t.chk
|
||||
|
||||
; RUN: %ProtectFileCheckOutput \
|
||||
; RUN: not FileCheck -dump-input=always -input-file %t.in %t.chk 2>&1 \
|
||||
; RUN: | FileCheck -match-full-lines %s -check-prefixes=LAB \
|
||||
; RUN: -implicit-check-not='remark:'
|
||||
; RUN: %ProtectFileCheckOutput \
|
||||
; RUN: not FileCheck -dump-input=always -input-file %t.in %t.chk -v 2>&1 \
|
||||
; RUN: | FileCheck -match-full-lines %s -check-prefixes=LAB,LAB-V \
|
||||
; RUN: -implicit-check-not='remark:'
|
||||
; RUN: %ProtectFileCheckOutput \
|
||||
; RUN: not FileCheck -dump-input=always -input-file %t.in %t.chk -vv 2>&1 \
|
||||
; RUN: | FileCheck -match-full-lines %s -check-prefixes=LAB,LAB-V,LAB-VV \
|
||||
; RUN: -implicit-check-not='remark:'
|
||||
|
||||
@ -18,12 +18,13 @@
|
||||
; Check -dump-input=<bad value>.
|
||||
;--------------------------------------------------
|
||||
|
||||
; RUN: %ProtectFileCheckOutput \
|
||||
; RUN: not FileCheck -input-file %t.good %t.check -check-prefix=CHECK \
|
||||
; RUN: -match-full-lines -dump-input=foobar 2>&1 \
|
||||
; RUN: | FileCheck %s -match-full-lines -check-prefix=BADVAL
|
||||
|
||||
; No positional arg.
|
||||
; RUN: not FileCheck -dump-input=foobar 2>&1 \
|
||||
; RUN: %ProtectFileCheckOutput not FileCheck -dump-input=foobar 2>&1 \
|
||||
; RUN: | FileCheck %s -match-full-lines -check-prefix=BADVAL
|
||||
|
||||
BADVAL: {{F|f}}ile{{C|c}}heck{{.*}}: for the --dump-input option: Cannot find option named 'foobar'!
|
||||
@ -33,11 +34,13 @@ BADVAL: {{F|f}}ile{{C|c}}heck{{.*}}: for the --dump-input option: Cannot find op
|
||||
;--------------------------------------------------
|
||||
|
||||
; Appended to normal command line.
|
||||
; RUN: %ProtectFileCheckOutput \
|
||||
; RUN: FileCheck -input-file %t.err -color %t.check -dump-input=help \
|
||||
; RUN: | FileCheck %s -check-prefix=HELP
|
||||
|
||||
; No positional arg.
|
||||
; RUN: FileCheck -dump-input=help | FileCheck %s -check-prefix=HELP
|
||||
; RUN: %ProtectFileCheckOutput FileCheck -dump-input=help \
|
||||
; RUN: | FileCheck %s -check-prefix=HELP
|
||||
|
||||
HELP-NOT: {{.}}
|
||||
HELP: The following description was requested by -dump-input=help
|
||||
@ -50,19 +53,23 @@ HELP-NOT: {{.}}
|
||||
; Include the case without -v, which isn't covered elsewhere.
|
||||
;--------------------------------------------------
|
||||
|
||||
; RUN: %ProtectFileCheckOutput \
|
||||
; RUN: FileCheck -input-file %t.good %t.check -check-prefix=CHECK \
|
||||
; RUN: -match-full-lines -dump-input=never 2>&1 \
|
||||
; RUN: | FileCheck %s -match-full-lines -allow-empty \
|
||||
; RUN: -check-prefixes=NOTRACE,NODUMP
|
||||
|
||||
; RUN: %ProtectFileCheckOutput \
|
||||
; RUN: not FileCheck -input-file %t.err %t.check -check-prefix=CHECK \
|
||||
; RUN: -match-full-lines -dump-input=never 2>&1 \
|
||||
; RUN: | FileCheck %s -match-full-lines -check-prefixes=NOTRACE,ERR,NODUMP
|
||||
|
||||
; RUN: %ProtectFileCheckOutput \
|
||||
; RUN: FileCheck -input-file %t.good %t.check -check-prefix=CHECK \
|
||||
; RUN: -match-full-lines -dump-input=never -v 2>&1 \
|
||||
; RUN: | FileCheck %s -match-full-lines -check-prefixes=TRACE,NODUMP
|
||||
|
||||
; RUN: %ProtectFileCheckOutput \
|
||||
; RUN: not FileCheck -input-file %t.err %t.check -check-prefix=CHECK \
|
||||
; RUN: -match-full-lines -dump-input=never -v 2>&1 \
|
||||
; RUN: | FileCheck %s -match-full-lines -check-prefixes=TRACE,ERR,NODUMP
|
||||
@ -71,10 +78,12 @@ HELP-NOT: {{.}}
|
||||
; Check no -dump-input, which defaults to never.
|
||||
;--------------------------------------------------
|
||||
|
||||
; RUN: %ProtectFileCheckOutput \
|
||||
; RUN: FileCheck -input-file %t.good %t.check -check-prefix=CHECK \
|
||||
; RUN: -match-full-lines -v 2>&1 \
|
||||
; RUN: | FileCheck %s -match-full-lines -check-prefixes=TRACE,NODUMP
|
||||
|
||||
; RUN: %ProtectFileCheckOutput \
|
||||
; RUN: not FileCheck -input-file %t.err %t.check -check-prefix=CHECK \
|
||||
; RUN: -match-full-lines -v 2>&1 \
|
||||
; RUN: | FileCheck %s -match-full-lines -check-prefixes=TRACE,ERR,NODUMP
|
||||
@ -85,20 +94,24 @@ HELP-NOT: {{.}}
|
||||
; Include the case without -v, which isn't covered elsewhere.
|
||||
;--------------------------------------------------
|
||||
|
||||
; RUN: %ProtectFileCheckOutput \
|
||||
; RUN: FileCheck -input-file %t.good %t.check -check-prefix=CHECK \
|
||||
; RUN: -match-full-lines -dump-input=fail 2>&1 \
|
||||
; RUN: | FileCheck %s -match-full-lines -allow-empty \
|
||||
; RUN: -check-prefixes=NOTRACE,NODUMP
|
||||
|
||||
; RUN: %ProtectFileCheckOutput \
|
||||
; RUN: not FileCheck -input-file %t.err %t.check -check-prefix=CHECK \
|
||||
; RUN: -match-full-lines -dump-input=fail 2>&1 \
|
||||
; RUN: | FileCheck %s -match-full-lines -check-prefixes=NOTRACE,ERR,DUMP-ERR
|
||||
|
||||
; RUN: %ProtectFileCheckOutput \
|
||||
; RUN: FileCheck -input-file %t.good %t.check -check-prefix=CHECK \
|
||||
; RUN: -match-full-lines -dump-input=fail -v 2>&1 \
|
||||
; RUN: | FileCheck %s -match-full-lines -allow-empty \
|
||||
; RUN: -check-prefixes=NOTRACE,NODUMP
|
||||
|
||||
; RUN: %ProtectFileCheckOutput \
|
||||
; RUN: not FileCheck -input-file %t.err %t.check -check-prefix=CHECK \
|
||||
; RUN: -match-full-lines -dump-input=fail -v 2>&1 \
|
||||
; RUN: | FileCheck %s -match-full-lines \
|
||||
@ -108,23 +121,25 @@ HELP-NOT: {{.}}
|
||||
; Check -dump-input-on-failure.
|
||||
;--------------------------------------------------
|
||||
|
||||
; RUN: %ProtectFileCheckOutput \
|
||||
; RUN: FileCheck -input-file %t.good %t.check -check-prefix=CHECK \
|
||||
; RUN: -match-full-lines -dump-input-on-failure -v 2>&1 \
|
||||
; RUN: | FileCheck %s -match-full-lines -allow-empty \
|
||||
; RUN: -check-prefixes=NOTRACE,NODUMP
|
||||
|
||||
; RUN: %ProtectFileCheckOutput \
|
||||
; RUN: not FileCheck -input-file %t.err %t.check -check-prefix=CHECK \
|
||||
; RUN: -match-full-lines -dump-input-on-failure -v 2>&1 \
|
||||
; RUN: | FileCheck %s -match-full-lines \
|
||||
; RUN: -check-prefixes=NOTRACE,ERR,DUMP-ERR,DUMP-ERR-V
|
||||
|
||||
; RUN: env FILECHECK_DUMP_INPUT_ON_FAILURE=1 \
|
||||
; RUN: %ProtectFileCheckOutput FILECHECK_DUMP_INPUT_ON_FAILURE=1 \
|
||||
; RUN: FileCheck -input-file %t.good %t.check -check-prefix=CHECK \
|
||||
; RUN: -match-full-lines -v 2>&1 \
|
||||
; RUN: | FileCheck %s -match-full-lines -allow-empty \
|
||||
; RUN: -check-prefixes=NOTRACE,NODUMP
|
||||
; RUN: -check-prefixes=NOTRACE,NODUMP
|
||||
|
||||
; RUN: env FILECHECK_DUMP_INPUT_ON_FAILURE=1 \
|
||||
; RUN: %ProtectFileCheckOutput FILECHECK_DUMP_INPUT_ON_FAILURE=1 \
|
||||
; RUN: not FileCheck -input-file %t.err %t.check -check-prefix=CHECK \
|
||||
; RUN: -match-full-lines -v 2>&1 \
|
||||
; RUN: | FileCheck %s -match-full-lines \
|
||||
@ -134,10 +149,12 @@ HELP-NOT: {{.}}
|
||||
; Check -dump-input=always.
|
||||
;--------------------------------------------------
|
||||
|
||||
; RUN: %ProtectFileCheckOutput \
|
||||
; RUN: FileCheck -input-file %t.good %t.check -check-prefix=CHECK \
|
||||
; RUN: -match-full-lines -dump-input=always -v 2>&1 \
|
||||
; RUN: | FileCheck %s -match-full-lines -check-prefixes=NOTRACE,DUMP-OK
|
||||
|
||||
; RUN: %ProtectFileCheckOutput \
|
||||
; RUN: not FileCheck -input-file %t.err %t.check -check-prefix=CHECK \
|
||||
; RUN: -match-full-lines -dump-input=always -v 2>&1 \
|
||||
; RUN: | FileCheck %s -match-full-lines \
|
||||
|
||||
@ -3,11 +3,15 @@
|
||||
; CHECK: foo
|
||||
; CHECK: bar
|
||||
|
||||
; RUN: env FILECHECK_OPTS= \
|
||||
; RUN: %ProtectFileCheckOutput \
|
||||
; RUN: not FileCheck %s -input-file %t.in 2>&1 \
|
||||
; RUN: | FileCheck -check-prefix QUIET %s
|
||||
|
||||
; RUN: env FILECHECK_OPTS=-v \
|
||||
; RUN: %ProtectFileCheckOutput FILECHECK_OPTS= \
|
||||
; RUN: not FileCheck %s -input-file %t.in 2>&1 \
|
||||
; RUN: | FileCheck -check-prefix QUIET %s
|
||||
|
||||
; RUN: %ProtectFileCheckOutput FILECHECK_OPTS=-v \
|
||||
; RUN: not FileCheck %s -input-file %t.in 2>&1 \
|
||||
; RUN: | FileCheck -check-prefix VERB %s
|
||||
|
||||
|
||||
@ -1,11 +1,11 @@
|
||||
; RUN: sed 's#^;.*##' %s | FileCheck -check-prefix=CHECK-PASS -implicit-check-not=warning: %s
|
||||
; RUN: sed 's#^;.*##' %s | not FileCheck -check-prefix=CHECK-FAIL1 -implicit-check-not=warning: %s 2>&1 | FileCheck %s -check-prefix CHECK-ERROR1
|
||||
; RUN: sed 's#^;.*##' %s | not FileCheck -check-prefix=CHECK-FAIL2 -implicit-check-not=warning: %s 2>&1 | FileCheck %s -check-prefix CHECK-ERROR2
|
||||
; RUN: sed 's#^;.*##' %s | not FileCheck -check-prefix=CHECK-FAIL3 -implicit-check-not=warning: %s 2>&1 | FileCheck %s -check-prefix CHECK-ERROR3
|
||||
; RUN: sed 's#^;.*##' %s | not FileCheck -check-prefix=CHECK-FAIL1 -implicit-check-not='{{aaa|bbb|ccc}}' %s 2>&1 | FileCheck %s -check-prefix CHECK-ERROR4
|
||||
; RUN: sed 's#^;.*##' %s | not FileCheck -check-prefix=CHECK-FAIL1 -implicit-check-not=aaa -implicit-check-not=bbb -implicit-check-not=ccc %s 2>&1 | FileCheck %s -check-prefix CHECK-ERROR5
|
||||
; RUN: sed 's#^;.*##' %s | not FileCheck -check-prefix=CHECK-FAIL2 -implicit-check-not=aaa -implicit-check-not=bbb -implicit-check-not=ccc %s 2>&1 | FileCheck %s -check-prefix CHECK-ERROR6
|
||||
; RUN: sed 's#^;.*##' %s | not FileCheck -check-prefix=CHECK-FAIL3 -implicit-check-not=aaa -implicit-check-not=bbb -implicit-check-not=ccc %s 2>&1 | FileCheck %s -check-prefix CHECK-ERROR7
|
||||
; RUN: sed 's#^;.*##' %s | %ProtectFileCheckOutput not FileCheck -check-prefix=CHECK-FAIL1 -implicit-check-not=warning: %s 2>&1 | FileCheck %s -check-prefix CHECK-ERROR1
|
||||
; RUN: sed 's#^;.*##' %s | %ProtectFileCheckOutput not FileCheck -check-prefix=CHECK-FAIL2 -implicit-check-not=warning: %s 2>&1 | FileCheck %s -check-prefix CHECK-ERROR2
|
||||
; RUN: sed 's#^;.*##' %s | %ProtectFileCheckOutput not FileCheck -check-prefix=CHECK-FAIL3 -implicit-check-not=warning: %s 2>&1 | FileCheck %s -check-prefix CHECK-ERROR3
|
||||
; RUN: sed 's#^;.*##' %s | %ProtectFileCheckOutput not FileCheck -check-prefix=CHECK-FAIL1 -implicit-check-not='{{aaa|bbb|ccc}}' %s 2>&1 | FileCheck %s -check-prefix CHECK-ERROR4
|
||||
; RUN: sed 's#^;.*##' %s | %ProtectFileCheckOutput not FileCheck -check-prefix=CHECK-FAIL1 -implicit-check-not=aaa -implicit-check-not=bbb -implicit-check-not=ccc %s 2>&1 | FileCheck %s -check-prefix CHECK-ERROR5
|
||||
; RUN: sed 's#^;.*##' %s | %ProtectFileCheckOutput not FileCheck -check-prefix=CHECK-FAIL2 -implicit-check-not=aaa -implicit-check-not=bbb -implicit-check-not=ccc %s 2>&1 | FileCheck %s -check-prefix CHECK-ERROR6
|
||||
; RUN: sed 's#^;.*##' %s | %ProtectFileCheckOutput not FileCheck -check-prefix=CHECK-FAIL3 -implicit-check-not=aaa -implicit-check-not=bbb -implicit-check-not=ccc %s 2>&1 | FileCheck %s -check-prefix CHECK-ERROR7
|
||||
|
||||
warning: aaa
|
||||
; CHECK-PASS: warning: aaa
|
||||
|
||||
@ -1,15 +1,15 @@
|
||||
; RUN: FileCheck -input-file %s %s
|
||||
; RUN: not FileCheck -check-prefix BAD1 -input-file %s %s 2>&1 | FileCheck -check-prefix ERR1 %s
|
||||
; RUN: not FileCheck -check-prefix BAD2 -input-file %s %s 2>&1 | FileCheck -check-prefix ERR2 %s
|
||||
; RUN: not FileCheck -check-prefix BAD3 -input-file %s %s 2>&1 | FileCheck -check-prefix ERR3 %s
|
||||
; RUN: not FileCheck -check-prefix BAD4 -input-file %s %s 2>&1 | FileCheck -check-prefix ERR4 %s
|
||||
; RUN: not FileCheck -check-prefix BAD5 -input-file %s %s 2>&1 | FileCheck -check-prefix ERR5 %s
|
||||
; RUN: not FileCheck -check-prefix BAD6 -input-file %s %s 2>&1 | FileCheck -check-prefix ERR6 %s
|
||||
; RUN: not FileCheck -check-prefix BAD7 -input-file %s %s 2>&1 | FileCheck -check-prefix ERR7 %s
|
||||
; RUN: not FileCheck -check-prefix BAD8 -input-file %s %s 2>&1 | FileCheck -check-prefix ERR8 %s
|
||||
; RUN: not FileCheck -check-prefix BAD9 -input-file %s %s 2>&1 | FileCheck -check-prefix ERR9 %s
|
||||
; RUN: not FileCheck -check-prefix BAD10 -input-file %s %s 2>&1 | FileCheck -check-prefix ERR10 %s
|
||||
; RUN: not FileCheck -check-prefix BAD11 -input-file %s %s 2>&1 | FileCheck -check-prefix ERR11 %s
|
||||
; RUN: %ProtectFileCheckOutput not FileCheck -check-prefix BAD1 -input-file %s %s 2>&1 | FileCheck -check-prefix ERR1 %s
|
||||
; RUN: %ProtectFileCheckOutput not FileCheck -check-prefix BAD2 -input-file %s %s 2>&1 | FileCheck -check-prefix ERR2 %s
|
||||
; RUN: %ProtectFileCheckOutput not FileCheck -check-prefix BAD3 -input-file %s %s 2>&1 | FileCheck -check-prefix ERR3 %s
|
||||
; RUN: %ProtectFileCheckOutput not FileCheck -check-prefix BAD4 -input-file %s %s 2>&1 | FileCheck -check-prefix ERR4 %s
|
||||
; RUN: %ProtectFileCheckOutput not FileCheck -check-prefix BAD5 -input-file %s %s 2>&1 | FileCheck -check-prefix ERR5 %s
|
||||
; RUN: %ProtectFileCheckOutput not FileCheck -check-prefix BAD6 -input-file %s %s 2>&1 | FileCheck -check-prefix ERR6 %s
|
||||
; RUN: %ProtectFileCheckOutput not FileCheck -check-prefix BAD7 -input-file %s %s 2>&1 | FileCheck -check-prefix ERR7 %s
|
||||
; RUN: %ProtectFileCheckOutput not FileCheck -check-prefix BAD8 -input-file %s %s 2>&1 | FileCheck -check-prefix ERR8 %s
|
||||
; RUN: %ProtectFileCheckOutput not FileCheck -check-prefix BAD9 -input-file %s %s 2>&1 | FileCheck -check-prefix ERR9 %s
|
||||
; RUN: %ProtectFileCheckOutput not FileCheck -check-prefix BAD10 -input-file %s %s 2>&1 | FileCheck -check-prefix ERR10 %s
|
||||
; RUN: %ProtectFileCheckOutput not FileCheck -check-prefix BAD11 -input-file %s %s 2>&1 | FileCheck -check-prefix ERR11 %s
|
||||
13
|
||||
14 aaa
|
||||
15 bbb
|
||||
@ -55,18 +55,19 @@
|
||||
55 BAD11: [[@LINE-1x]]
|
||||
56 ERR11: line-count.txt:[[#@LINE-1]]:20: error: unexpected characters at end of expression 'x'
|
||||
57
|
||||
; RUN: %ProtectFileCheckOutput \
|
||||
; RUN: not FileCheck -check-prefix BAD12 -input-file %s %s 2>&1 \
|
||||
; RUN: | FileCheck -check-prefix ERR12 %s
|
||||
60
|
||||
61 BAD12: [[#@LINE-1]] NOT HERE
|
||||
62 ERR12: note: with "@LINE-1" equal to "60"
|
||||
63
|
||||
64 CHECK: [[#@LINE]] CHECK
|
||||
65 CHECK: [[# @LINE]] CHECK
|
||||
66 CHECK: [[# @LINE ]] CHECK
|
||||
67
|
||||
68 CHECK: [[#@LINE-1]]
|
||||
69 CHECK: [[# @LINE-1]] CHECK
|
||||
70 CHECK: [[# @LINE -1]] CHECK
|
||||
71 CHECK: [[# @LINE - 1]] CHECK
|
||||
72 CHECK: [[# @LINE - 1 ]] CHECK
|
||||
61
|
||||
62 BAD12: [[#@LINE-1]] NOT HERE
|
||||
63 ERR12: note: with "@LINE-1" equal to "61"
|
||||
64
|
||||
65 CHECK: [[#@LINE]] CHECK
|
||||
66 CHECK: [[# @LINE]] CHECK
|
||||
67 CHECK: [[# @LINE ]] CHECK
|
||||
68
|
||||
69 CHECK: [[#@LINE-1]]
|
||||
70 CHECK: [[# @LINE-1]] CHECK
|
||||
71 CHECK: [[# @LINE -1]] CHECK
|
||||
72 CHECK: [[# @LINE - 1]] CHECK
|
||||
73 CHECK: [[# @LINE - 1 ]] CHECK
|
||||
|
||||
@ -3,16 +3,54 @@ import lit
|
||||
# Use lit's internal shell to help guarantee test portability.
|
||||
config.test_format = lit.formats.ShTest(execute_external=False)
|
||||
|
||||
# Unset environment variables that the FileCheck tests
|
||||
# expect not to be set.
|
||||
file_check_expected_unset_vars = [
|
||||
'FILECHECK_DUMP_INPUT_ON_FAILURE',
|
||||
'FILECHECK_OPTS',
|
||||
]
|
||||
|
||||
for env_var in file_check_expected_unset_vars:
|
||||
if env_var in config.environment:
|
||||
lit_config.note('Removing {} from environment for FileCheck tests'.format(
|
||||
env_var)
|
||||
)
|
||||
config.environment.pop(env_var)
|
||||
# %ProtectFileCheckOutput should precede a FileCheck call if and only if the
|
||||
# call's textual output affects test results. It's usually easy to tell: just
|
||||
# look for redirection or piping of the FileCheck call's stdout or stderr.
|
||||
#
|
||||
# Examples:
|
||||
#
|
||||
# ; Test another program, using FileCheck to verify its textual output.
|
||||
# ; Only FileCheck's exit status affects test results, so a bare FileCheck
|
||||
# ; call is sufficient and more convenient for debugging.
|
||||
# ;
|
||||
# ; RUN: %t | FileCheck %s
|
||||
# ; CHECK: {{[0-9]+\.0}}
|
||||
#
|
||||
# ; Test FileCheck itself, but only examine its exit status, so a bare
|
||||
# ; FileCheck call is still sufficient and more convenient for debugging.
|
||||
# ;
|
||||
# ; RUN: FileCheck -input-file %s %s
|
||||
# ; CHECK: {{[0-9]+\.0}}
|
||||
# ; 5.0
|
||||
#
|
||||
# ; Check that the FileCheck trace is off by default. The first FileCheck
|
||||
# ; call's textual output affects test results, so it requires
|
||||
# ; %ProtectFileCheckOutput to be safe.
|
||||
# ;
|
||||
# ; RUN: %ProtectFileCheckOutput FileCheck -input-file %s %s 2>&1 \
|
||||
# ; RUN: | FileCheck -allow-empty -check-prefix QUIET %s
|
||||
# ;
|
||||
# ; CHECK: {{[0-9]+\.0}}
|
||||
# ; 5.0
|
||||
# ; QUIET-NOT: expected string found in input
|
||||
#
|
||||
# ; Check that the FileCheck trace is on when FILECHECK_OPTS=-v.
|
||||
# ; FILECHECK_OPTS must be set after %ProtectFileCheckOutput, which clears
|
||||
# ; FILECHECK_OPTS beforehand.
|
||||
# ;
|
||||
# ; RUN: %ProtectFileCheckOutput FILECHECK_OPTS=-v \
|
||||
# ; RUN: FileCheck -input-file %s %s 2>&1 \
|
||||
# ; RUN: | FileCheck -check-prefix TRACE %s
|
||||
# ;
|
||||
# ; CHECK: {{[0-9]+\.0}}
|
||||
# ; 5.0
|
||||
# ; TRACE: expected string found in input
|
||||
#
|
||||
# %ProtectFileCheckOutput's purpose is to ensure correct test results when
|
||||
# developers set FileCheck environment variables (e.g.,
|
||||
# FILECHECK_OPTS=-dump-input=fail) to tweak the output of FileCheck while
|
||||
# debugging tests. If a developer sets values that affect FileCheck's exit
|
||||
# status (e.g., FILECHECK_OPTS=-strict-whitespace), he shouldn't be surprised
|
||||
# that test results throughout all test suites are affected.
|
||||
config.substitutions.append(('%ProtectFileCheckOutput',
|
||||
'env -u FILECHECK_OPTS -u FILECHECK_DUMP_INPUT_ON_FAILURE'))
|
||||
|
||||
@ -1,7 +1,10 @@
|
||||
// RUN: %ProtectFileCheckOutput \
|
||||
// RUN: not FileCheck -match-full-lines -input-file %s %s 2>&1 \
|
||||
// RUN: | FileCheck --check-prefix=ERROR --implicit-check-not=error: %s
|
||||
// RUN: not FileCheck -match-full-lines -strict-whitespace -input-file %s %s 2>&1 \
|
||||
// RUN: | FileCheck --check-prefix=ERROR-STRICT --check-prefix=ERROR --implicit-check-not=error: %s
|
||||
// RUN: %ProtectFileCheckOutput \
|
||||
// RUN: not FileCheck -match-full-lines -strict-whitespace -input-file %s %s \
|
||||
// RUN: 2>&1 | FileCheck --check-prefix=ERROR-STRICT --check-prefix=ERROR \
|
||||
// RUN: --implicit-check-not=error: %s
|
||||
|
||||
Label 1
|
||||
a line
|
||||
|
||||
@ -1,6 +1,6 @@
|
||||
// RUN: FileCheck -check-prefix=ANOTHER-PREFIX -input-file %s %s
|
||||
// RUN: not FileCheck -check-prefix=PREFIX1 -check-prefix=PREFIX2 -input-file %s %s 2>&1 | FileCheck -strict-whitespace -check-prefix=CHECK-NONEXISTENT-PREFIX -check-prefix=ALSO-NONEXISTENT %s
|
||||
// RUN: not FileCheck -check-prefixes=PREFIX1,PREFIX2 -input-file %s %s 2>&1 | FileCheck -strict-whitespace -check-prefixes=CHECK-NONEXISTENT-PREFIX,ALSO-NONEXISTENT %s
|
||||
// RUN: %ProtectFileCheckOutput not FileCheck -check-prefix=PREFIX1 -check-prefix=PREFIX2 -input-file %s %s 2>&1 | FileCheck -strict-whitespace -check-prefix=CHECK-NONEXISTENT-PREFIX -check-prefix=ALSO-NONEXISTENT %s
|
||||
// RUN: %ProtectFileCheckOutput not FileCheck -check-prefixes=PREFIX1,PREFIX2 -input-file %s %s 2>&1 | FileCheck -strict-whitespace -check-prefixes=CHECK-NONEXISTENT-PREFIX,ALSO-NONEXISTENT %s
|
||||
|
||||
foobar
|
||||
; ANOTHER-PREFIX: foobar
|
||||
|
||||
@ -1,3 +1,3 @@
|
||||
; RUN: not FileCheck 2>&1 | FileCheck %s
|
||||
; RUN: %ProtectFileCheckOutput not FileCheck 2>&1 | FileCheck %s
|
||||
|
||||
CHECK: <check-file> not specified
|
||||
|
||||
@ -1,9 +1,9 @@
|
||||
; RUN: not FileCheck -check-prefix=DAGNOT -input-file %s %s 2>&1 | FileCheck -check-prefix=ERROR -check-prefix=DAGNOT-ERROR %s
|
||||
; RUN: not FileCheck -check-prefix=NOTDAG -input-file %s %s 2>&1 | FileCheck -check-prefix=ERROR -check-prefix=NOTDAG-ERROR %s
|
||||
; RUN: not FileCheck -check-prefix=NEXTNOT -input-file %s %s 2>&1 | FileCheck -check-prefix=ERROR -check-prefix=NEXTNOT-ERROR %s
|
||||
; RUN: not FileCheck -check-prefix=NOTNEXT -input-file %s %s 2>&1 | FileCheck -check-prefix=ERROR -check-prefix=NOTNEXT-ERROR %s
|
||||
; RUN: not FileCheck -check-prefix=SAMENOT -input-file %s %s 2>&1 | FileCheck -check-prefix=ERROR -check-prefix=SAMENOT-ERROR %s
|
||||
; RUN: not FileCheck -check-prefix=NOTSAME -input-file %s %s 2>&1 | FileCheck -check-prefix=ERROR -check-prefix=NOTSAME-ERROR %s
|
||||
; RUN: %ProtectFileCheckOutput not FileCheck -check-prefix=DAGNOT -input-file %s %s 2>&1 | FileCheck -check-prefix=ERROR -check-prefix=DAGNOT-ERROR %s
|
||||
; RUN: %ProtectFileCheckOutput not FileCheck -check-prefix=NOTDAG -input-file %s %s 2>&1 | FileCheck -check-prefix=ERROR -check-prefix=NOTDAG-ERROR %s
|
||||
; RUN: %ProtectFileCheckOutput not FileCheck -check-prefix=NEXTNOT -input-file %s %s 2>&1 | FileCheck -check-prefix=ERROR -check-prefix=NEXTNOT-ERROR %s
|
||||
; RUN: %ProtectFileCheckOutput not FileCheck -check-prefix=NOTNEXT -input-file %s %s 2>&1 | FileCheck -check-prefix=ERROR -check-prefix=NOTNEXT-ERROR %s
|
||||
; RUN: %ProtectFileCheckOutput not FileCheck -check-prefix=SAMENOT -input-file %s %s 2>&1 | FileCheck -check-prefix=ERROR -check-prefix=SAMENOT-ERROR %s
|
||||
; RUN: %ProtectFileCheckOutput not FileCheck -check-prefix=NOTSAME -input-file %s %s 2>&1 | FileCheck -check-prefix=ERROR -check-prefix=NOTSAME-ERROR %s
|
||||
|
||||
foo
|
||||
; DAGNOT: foo
|
||||
|
||||
@ -1,6 +1,7 @@
|
||||
; Test incorrect syntax for -D# option is correctly diagnosed.
|
||||
|
||||
; Invalid variable name: starts with a digit.
|
||||
RUN: %ProtectFileCheckOutput \
|
||||
RUN: not FileCheck -D#10VALUE=10 --input-file %s %s 2>&1 \
|
||||
RUN: | FileCheck %s --strict-whitespace --match-full-lines --check-prefix NUMERRCLIFMT
|
||||
|
||||
@ -9,6 +10,7 @@ NUMERRCLIFMT-NEXT:Global define #1: #10VALUE=10 (parsed as: {{\[\[#10VALUE:10\]\
|
||||
NUMERRCLIFMT-NEXT: ^
|
||||
|
||||
; Invalid definition of pseudo variable.
|
||||
RUN: %ProtectFileCheckOutput \
|
||||
RUN: not FileCheck -D#@VALUE=10 --input-file %s %s 2>&1 \
|
||||
RUN: | FileCheck %s --strict-whitespace --match-full-lines --check-prefix NUMERRCLIPSEUDO
|
||||
|
||||
@ -17,6 +19,7 @@ NUMERRCLIPSEUDO-NEXT:Global define #1: #@VALUE=10 (parsed as: {{\[\[#@VALUE:10\]
|
||||
NUMERRCLIPSEUDO-NEXT: ^
|
||||
|
||||
; Invalid definition of an expression.
|
||||
RUN: %ProtectFileCheckOutput \
|
||||
RUN: not FileCheck -D#VALUE+2=10 --input-file %s %s 2>&1 \
|
||||
RUN: | FileCheck %s --strict-whitespace --match-full-lines --check-prefix NUMERRCLITRAIL
|
||||
|
||||
|
||||
@ -2,12 +2,20 @@
|
||||
; value and CHECK directives using them match as expected given the value set.
|
||||
|
||||
RUN: FileCheck -D#NUMVAL1=8 -D#NUMVAL2='NUMVAL1 + 4' -check-prefixes CHECKNUM1,CHECKNUM2 -input-file %s %s
|
||||
|
||||
RUN: %ProtectFileCheckOutput \
|
||||
RUN: not FileCheck -D#NUMVAL1=7 -D#NUMVAL2=12 -check-prefix CHECKNUM1 -input-file %s %s 2>&1 \
|
||||
RUN: | FileCheck %s --strict-whitespace -check-prefix NUMERRMSG1
|
||||
|
||||
RUN: %ProtectFileCheckOutput \
|
||||
RUN: not FileCheck -D#NUMVAL1=8 -D#NUMVAL2=8 -check-prefix CHECKNUM2 -input-file %s %s 2>&1 \
|
||||
RUN: | FileCheck %s --strict-whitespace -check-prefix NUMERRMSG2
|
||||
|
||||
RUN: %ProtectFileCheckOutput \
|
||||
RUN: not FileCheck -D#NUMVAL1=8 -D#NUMVAL2=8 -check-prefix NUMNOT -input-file %s %s 2>&1 \
|
||||
RUN: | FileCheck %s --strict-whitespace -check-prefixes NOT-NUMERRMSG1
|
||||
|
||||
RUN: %ProtectFileCheckOutput \
|
||||
RUN: not FileCheck -D#NUMVAL1=7 -D#NUMVAL2=12 -check-prefix NUMNOT -input-file %s %s 2>&1 \
|
||||
RUN: | FileCheck %s --strict-whitespace -check-prefixes NOT-NUMERRMSG2
|
||||
RUN: FileCheck -D#NUMVAL1=7 -D#NUMVAL2=8 -check-prefixes NUMNOT -input-file %s %s
|
||||
|
||||
@ -97,6 +97,7 @@ foo 104 bar
|
||||
; CHECK-NEXT: foo [[#]] bar
|
||||
|
||||
; Numeric expression using undefined variables.
|
||||
RUN: %ProtectFileCheckOutput \
|
||||
RUN: not FileCheck --check-prefix UNDEF-USE --input-file %s %s 2>&1 \
|
||||
RUN: | FileCheck --strict-whitespace --check-prefix UNDEF-USE-MSG %s
|
||||
|
||||
@ -115,7 +116,9 @@ UNDEF-USE-MSG-NEXT: UNDEFVAR: 11
|
||||
UNDEF-USE-MSG-NEXT: {{^}}^{{$}}
|
||||
|
||||
; Numeric expression with unsupported operator.
|
||||
RUN: not FileCheck -D#NUMVAR=10 --check-prefix INVAL-OP --input-file %s %s 2>&1 \
|
||||
RUN: %ProtectFileCheckOutput \
|
||||
RUN: not FileCheck -D#NUMVAR=10 --check-prefix INVAL-OP \
|
||||
RUN: --input-file %s %s 2>&1 \
|
||||
RUN: | FileCheck --strict-whitespace --check-prefix INVAL-OP-MSG %s
|
||||
|
||||
INVALID OPERATOR
|
||||
@ -128,17 +131,29 @@ INVAL-OP-MSG-NEXT: {{^}} ^{{$}}
|
||||
|
||||
; Name conflict between Numeric variable definition and string variable
|
||||
; definition whether from the command-line or input text.
|
||||
RUN: not FileCheck --check-prefixes CONFLICT,CONFLICT1,CONFLICT2 --input-file %s %s 2>&1 \
|
||||
RUN: %ProtectFileCheckOutput \
|
||||
RUN: not FileCheck --check-prefixes CONFLICT,CONFLICT1,CONFLICT2 \
|
||||
RUN: --input-file %s %s 2>&1 \
|
||||
RUN: | FileCheck --strict-whitespace --check-prefix INPUT-STR-CONFLICT %s
|
||||
RUN: not FileCheck -D#NUMVAR=42 --check-prefixes CONFLICT,CONFLICT2 --input-file %s %s 2>&1 \
|
||||
RUN: %ProtectFileCheckOutput \
|
||||
RUN: not FileCheck -D#NUMVAR=42 --check-prefixes CONFLICT,CONFLICT2 \
|
||||
RUN: --input-file %s %s 2>&1 \
|
||||
RUN: | FileCheck --strict-whitespace --check-prefix INPUT-STR-CONFLICT %s
|
||||
RUN: not FileCheck -D#NUMVAR=42 -DNUMVAR=foobar --check-prefix CONFLICT --input-file %s %s 2>&1 \
|
||||
RUN: %ProtectFileCheckOutput \
|
||||
RUN: not FileCheck -D#NUMVAR=42 -DNUMVAR=foobar --check-prefix CONFLICT \
|
||||
RUN: --input-file %s %s 2>&1 \
|
||||
RUN: | FileCheck --strict-whitespace --check-prefix CLI-STR-CONFLICT %s
|
||||
RUN: not FileCheck --check-prefixes CONFLICT,CONFLICT3,CONFLICT4 --input-file %s %s 2>&1 \
|
||||
RUN: %ProtectFileCheckOutput \
|
||||
RUN: not FileCheck --check-prefixes CONFLICT,CONFLICT3,CONFLICT4 \
|
||||
RUN: --input-file %s %s 2>&1 \
|
||||
RUN: | FileCheck --strict-whitespace --check-prefix INPUT-NUM-CONFLICT %s
|
||||
RUN: not FileCheck -DSTRVAR=foobar --check-prefixes CONFLICT,CONFLICT4 --input-file %s %s 2>&1 \
|
||||
RUN: %ProtectFileCheckOutput \
|
||||
RUN: not FileCheck -DSTRVAR=foobar --check-prefixes CONFLICT,CONFLICT4 \
|
||||
RUN: --input-file %s %s 2>&1 \
|
||||
RUN: | FileCheck --strict-whitespace --check-prefix INPUT-NUM-CONFLICT %s
|
||||
RUN: not FileCheck -DSTRVAR=foobar -D#STRVAR=42 --check-prefix CONFLICT --input-file %s %s 2>&1 \
|
||||
RUN: %ProtectFileCheckOutput \
|
||||
RUN: not FileCheck -DSTRVAR=foobar -D#STRVAR=42 --check-prefix CONFLICT \
|
||||
RUN: --input-file %s %s 2>&1 \
|
||||
RUN: | FileCheck --strict-whitespace --check-prefix CLI-NUM-CONFLICT %s
|
||||
|
||||
STRVAR NUMVAR CONFLICT
|
||||
@ -164,6 +179,7 @@ CLI-NUM-CONFLICT: Global defines:2:45: error: string variable with name 'STRVAR'
|
||||
CLI-NUM-CONFLICT-NEXT: {{^}} ^{{$}}
|
||||
|
||||
; Numeric variable definition with too big value.
|
||||
RUN: %ProtectFileCheckOutput \
|
||||
RUN: not FileCheck --check-prefix BIGVAL --input-file %s %s 2>&1 \
|
||||
RUN: | FileCheck --strict-whitespace --check-prefix BIGVAL-MSG %s
|
||||
|
||||
@ -177,6 +193,7 @@ BIGVAL-MSG-NEXT: {{^}} ^{{$}}
|
||||
|
||||
; Verify that when a variable is set to an expression the expression is still
|
||||
; checked.
|
||||
RUN: %ProtectFileCheckOutput \
|
||||
RUN: not FileCheck --check-prefix DEF-EXPR-FAIL --input-file %s %s 2>&1 \
|
||||
RUN: | FileCheck --strict-whitespace --check-prefix DEF-EXPR-FAIL-MSG %s
|
||||
|
||||
@ -192,8 +209,10 @@ DEF-EXPR-FAIL-MSG-NEXT: {{^}} ^{{$}}
|
||||
|
||||
; Verify that using a numeric variable defined on the same line (whether from
|
||||
; input or from an expression) is rejected.
|
||||
RUN: %ProtectFileCheckOutput \
|
||||
RUN: not FileCheck --check-prefix SAME-LINE-USE1 --input-file %s %s 2>&1 \
|
||||
RUN: | FileCheck --strict-whitespace --check-prefix SAME-LINE-USE-MSG1 %s
|
||||
RUN: %ProtectFileCheckOutput \
|
||||
RUN: not FileCheck --check-prefix SAME-LINE-USE2 --input-file %s %s 2>&1 \
|
||||
RUN: | FileCheck --strict-whitespace --check-prefix SAME-LINE-USE-MSG2 %s
|
||||
|
||||
|
||||
@ -4,8 +4,8 @@
|
||||
|
||||
; Run without and with -color. In the former case, FileCheck should suppress
|
||||
; color in its diagnostics because stderr is a file.
|
||||
; RUN: not FileCheck %s < %t.in 2> %t.no-color
|
||||
; RUN: not FileCheck -color %s < %t.in 2> %t.color
|
||||
; RUN: %ProtectFileCheckOutput not FileCheck %s < %t.in 2> %t.no-color
|
||||
; RUN: %ProtectFileCheckOutput not FileCheck -color %s < %t.in 2> %t.color
|
||||
|
||||
; Check whether color was produced.
|
||||
; RUN: FileCheck -check-prefix NO-COLOR %s < %t.no-color
|
||||
|
||||
@ -1,30 +1,31 @@
|
||||
; Test incorrect syntax for -D option is correctly diagnosed.
|
||||
|
||||
; Missing equal sign.
|
||||
RUN: not FileCheck -DVALUE10 --input-file %s %s 2>&1 \
|
||||
RUN: %ProtectFileCheckOutput not FileCheck -DVALUE10 --input-file %s %s 2>&1 \
|
||||
RUN: | FileCheck %s --check-prefix ERRCLIEQ1
|
||||
|
||||
ERRCLIEQ1: Missing equal sign in command-line definition '-DVALUE10'
|
||||
|
||||
; Missing definition expression (variable name, equal sign and value).
|
||||
RUN: not FileCheck -D --input-file %s %s 2>&1 \
|
||||
RUN: %ProtectFileCheckOutput not FileCheck -D --input-file %s %s 2>&1 \
|
||||
RUN: | FileCheck %s --check-prefix ERRCLIEQ2
|
||||
|
||||
ERRCLIEQ2: {{F|f}}ile{{C|c}}heck{{[^:]*}}: for the -D option: requires a value!
|
||||
|
||||
; Missing variable name.
|
||||
RUN: not FileCheck -D=10 --input-file %s %s 2>&1 \
|
||||
RUN: %ProtectFileCheckOutput not FileCheck -D=10 --input-file %s %s 2>&1 \
|
||||
RUN: | FileCheck %s --check-prefix ERRCLIVAR1
|
||||
|
||||
ERRCLIVAR1: Missing variable name in command-line definition '-D=10'
|
||||
|
||||
; Missing variable name.
|
||||
RUN: not FileCheck -D= --input-file %s %s 2>&1 \
|
||||
RUN: %ProtectFileCheckOutput not FileCheck -D= --input-file %s %s 2>&1 \
|
||||
RUN: | FileCheck %s --check-prefix ERRCLIVAR2
|
||||
|
||||
ERRCLIVAR2: Missing variable name in command-line definition '-D='
|
||||
|
||||
; Invalid variable name: starts with a digit.
|
||||
RUN: %ProtectFileCheckOutput \
|
||||
RUN: not FileCheck -D10VALUE=10 --input-file %s %s 2>&1 \
|
||||
RUN: | FileCheck %s --strict-whitespace --match-full-lines --check-prefix ERRCLIFMT
|
||||
|
||||
@ -33,6 +34,7 @@ ERRCLIFMT-NEXT:Global define #1: 10VALUE=10
|
||||
ERRCLIFMT-NEXT: ^
|
||||
|
||||
; Invalid definition of pseudo variable.
|
||||
RUN: %ProtectFileCheckOutput \
|
||||
RUN: not FileCheck -D@VALUE=10 --input-file %s %s 2>&1 \
|
||||
RUN: | FileCheck %s --strict-whitespace --match-full-lines --check-prefix ERRCLIPSEUDO
|
||||
|
||||
@ -41,6 +43,7 @@ ERRCLIPSEUDO-NEXT:Global define #1: @VALUE=10
|
||||
ERRCLIPSEUDO-NEXT: ^
|
||||
|
||||
; Invalid definition of an expression.
|
||||
RUN: %ProtectFileCheckOutput \
|
||||
RUN: not FileCheck -D'VALUE + 2=10' --input-file %s %s 2>&1 \
|
||||
RUN: | FileCheck %s --strict-whitespace --check-prefix ERRCLITRAIL
|
||||
|
||||
|
||||
@ -3,8 +3,9 @@
|
||||
|
||||
; String variable correctly defined to a non-empty string.
|
||||
RUN: FileCheck -DVALUE=10 --input-file %s %s
|
||||
RUN: not FileCheck -DVALUE=20 --input-file %s %s 2>&1 \
|
||||
RUN: %ProtectFileCheckOutput not FileCheck -DVALUE=20 --input-file %s %s 2>&1 \
|
||||
RUN: | FileCheck %s --check-prefix ERRMSG
|
||||
RUN: %ProtectFileCheckOutput \
|
||||
RUN: not FileCheck -DVALUE=10 --check-prefix NOT --input-file %s %s 2>&1 \
|
||||
RUN: | FileCheck %s --check-prefix NOT-ERRMSG
|
||||
RUN: FileCheck -DVALUE=20 --check-prefix NOT --input-file %s %s
|
||||
|
||||
@ -1,8 +1,8 @@
|
||||
// RUN: not FileCheck -check-prefix=A! -input-file %s %s 2>&1 | FileCheck -check-prefix=BAD_PREFIX %s
|
||||
// RUN: %ProtectFileCheckOutput not FileCheck -check-prefix=A! -input-file %s %s 2>&1 | FileCheck -check-prefix=BAD_PREFIX %s
|
||||
// RUN: FileCheck -check-prefix=A1a-B_c -input-file %s %s
|
||||
// RUN: not FileCheck -check-prefix=REPEAT -check-prefix=REPEAT -input-file %s %s 2>&1 | FileCheck -check-prefix=BAD_PREFIX %s
|
||||
// RUN: not FileCheck -check-prefix=VALID -check-prefix=A! -input-file %s %s 2>&1 | FileCheck -check-prefix=BAD_PREFIX %s
|
||||
// RUN: not FileCheck -check-prefix= -input-file %s %s 2>&1 | FileCheck -check-prefix=BAD_PREFIX %s
|
||||
// RUN: %ProtectFileCheckOutput not FileCheck -check-prefix=REPEAT -check-prefix=REPEAT -input-file %s %s 2>&1 | FileCheck -check-prefix=BAD_PREFIX %s
|
||||
// RUN: %ProtectFileCheckOutput not FileCheck -check-prefix=VALID -check-prefix=A! -input-file %s %s 2>&1 | FileCheck -check-prefix=BAD_PREFIX %s
|
||||
// RUN: %ProtectFileCheckOutput not FileCheck -check-prefix= -input-file %s %s 2>&1 | FileCheck -check-prefix=BAD_PREFIX %s
|
||||
foobar
|
||||
; A1a-B_c: foobar
|
||||
|
||||
|
||||
@ -6,11 +6,11 @@
|
||||
RUN: FileCheck --check-prefixes CHECK,LOCAL3,GLOBAL --input-file %s %s
|
||||
|
||||
RUN: FileCheck --check-prefixes CHECK,GLOBAL --enable-var-scope --input-file %s %s
|
||||
RUN: not FileCheck --check-prefixes CHECK,LOCAL1 --enable-var-scope --input-file %s %s 2>&1 \
|
||||
RUN: %ProtectFileCheckOutput not FileCheck --check-prefixes CHECK,LOCAL1 --enable-var-scope --input-file %s %s 2>&1 \
|
||||
RUN: | FileCheck --check-prefixes ERRUNDEF,ERRUNDEFLOCAL %s
|
||||
RUN: not FileCheck --check-prefixes CHECK,LOCAL2 --enable-var-scope --input-file %s %s 2>&1 \
|
||||
RUN: %ProtectFileCheckOutput not FileCheck --check-prefixes CHECK,LOCAL2 --enable-var-scope --input-file %s %s 2>&1 \
|
||||
RUN: | FileCheck --check-prefixes ERRUNDEF,ERRUNDEFLOCNUM %s
|
||||
RUN: not FileCheck --check-prefixes CHECK,LOCAL3 --enable-var-scope --input-file %s %s 2>&1 \
|
||||
RUN: %ProtectFileCheckOutput not FileCheck --check-prefixes CHECK,LOCAL3 --enable-var-scope --input-file %s %s 2>&1 \
|
||||
RUN: | FileCheck --check-prefixes ERRUNDEF,ERRUNDEFLOCAL,ERRUNDEFLOCNUM %s
|
||||
|
||||
local1
|
||||
|
||||
@ -1,6 +1,9 @@
|
||||
; RUN: FileCheck -input-file %s %s 2>&1 | FileCheck -check-prefix QUIET --allow-empty %s
|
||||
; RUN: FileCheck -v -input-file %s %s 2>&1 | FileCheck --strict-whitespace -check-prefix V %s
|
||||
; RUN: FileCheck -vv -input-file %s %s 2>&1 | FileCheck --strict-whitespace -check-prefixes V,VV %s
|
||||
; RUN: %ProtectFileCheckOutput FileCheck -input-file %s %s 2>&1 \
|
||||
; RUN: | FileCheck -check-prefix QUIET --allow-empty %s
|
||||
; RUN: %ProtectFileCheckOutput FileCheck -v -input-file %s %s 2>&1 \
|
||||
; RUN: | FileCheck --strict-whitespace -check-prefix V %s
|
||||
; RUN: %ProtectFileCheckOutput FileCheck -vv -input-file %s %s 2>&1 \
|
||||
; RUN: | FileCheck --strict-whitespace -check-prefixes V,VV %s
|
||||
|
||||
foo
|
||||
bar
|
||||
|
||||
Loading…
Reference in New Issue
Block a user