Allow MIMG instructions to be selected with 6/7 VGPRs for vaddr.
Previously these were rounded up to VReg_256 this saves VGPRs.
Reviewed By: foad
Differential Revision: https://reviews.llvm.org/D103800
Avoid having to round up to v8f32/VReg_256 when only 5 VGPRs are
required for a MIMG address operand.
Maintain _V8 instruction variants of pseudo instructions allowing
assembly prior to GFX10 to work as-is. Currently the validator
can tell for GFX10 what the correct size is, so will disallow
oversize address registers.
Reviewed By: rampitec
Differential Revision: https://reviews.llvm.org/D103672
A16 support for image instructions assembly/disassembly (gfx10) was missing
Also refactor MIMG op addr size calcs to common function
We'd got 3 places where the same operation was being done.
One test is now marked XFAIL until a related codegen patch is in place
Differential Revision: https://reviews.llvm.org/D102231
Change-Id: I7e86e730ef8c71901457855cba570581f4f576bb
1. Add an accessor function to MCSymbolizer to retrieve addresses
referenced by a symbolizable operand, but not resolved to a symbol.
That way, the caller can synthesize labels at those addresses and
then retry disassembling the section.
2. Implement that in AMDGPU -- a failed symbol lookup results in the
address being added to a vector returned by the new function.
3. Use that in llvm-objdump when using MCSymbolizer (which only happens
on AMDGPU) and SymbolizeOperands is on.
Differential Revision: https://reviews.llvm.org/D101145
Change-Id: I19087c3bbfece64bad5a56ee88bcc9110d83989e
Gives reasoning for convertDPP8.
Also corrects typo in Operand type comment.
Reviewed By: rampitec
Differential Revision: https://reviews.llvm.org/D100665
Change-Id: I33ff269db8072d83e5e0ecdbfb731d6000fc26c4
Replace individual operands GLC, SLC, and DLC with a single cache_policy
bitmask operand. This will reduce the number of operands in MIR and I hope
the amount of code. These operands are mostly 0 anyway.
Additional advantage that parser will accept these flags in any order unlike
now.
Differential Revision: https://reviews.llvm.org/D96469
With tfe on there can be a vgpr write to vdata+1.
Add tablegen support for 5 register vdata store.
This is required for 4 register vdata store with tfe.
Differential Revision: https://reviews.llvm.org/D94960
Rename the *_gfx9_gfx10 ttmp registers to *_gfx9plus for simplicity,
and use the corresponding isGFX9Plus predicate to decide when to use
them instead of the old *_vi versions.
Differential Revision: https://reviews.llvm.org/D94975
- Clarify documentation on initializing scratch.
- Rename compute_pgm_rsrc2 field for enabling scratch from
ENABLE_SGPR_PRIVATE_SEGMENT_WAVEFRONT_OFFSET to
ENABLE_PRIVATE_SEGMENT to match hardware definition.
Differential Revision: https://reviews.llvm.org/D93271
It's more future-proof to use isGFX10Plus from the start, on the
assumption that future architectures will be based on current
architectures.
Also make use of the existing isGFX9Plus in a few places.
Differential Revision: https://reviews.llvm.org/D92092
No longer rely on an external tool to build the llvm component layout.
Instead, leverage the existing `add_llvm_componentlibrary` cmake function and
introduce `add_llvm_component_group` to accurately describe component behavior.
These function store extra properties in the created targets. These properties
are processed once all components are defined to resolve library dependencies
and produce the header expected by llvm-config.
Differential Revision: https://reviews.llvm.org/D90848
This change adds a real glc operand to the return atomic
instead of just string " glc" in the middle of the asm
string.
Improves asm parser diagnostics.
Differential Revision: https://reviews.llvm.org/D90730
This instruction was introduced in GFX10.3, reusing the opcode of
v_mac_legacy_f32 from GFX10.1.
Differential Revision: https://reviews.llvm.org/D89247
Note that all subtargets up to GFX10.1 have v_mad_legacy_f32, but GFX8/9
lack v_mac_legacy_f32. GFX10.3 has no mad/mac f32 instructions at all.
Differential Revision: https://reviews.llvm.org/D88890
Add 96-bit, 160-bit and 256-bit AReg classes to match VReg and SReg.
NFC as far as I know, but it may avoid weird legalization problems.
Differential Revision: https://reviews.llvm.org/D78348
Summary:
For builds with LLVM_BUILD_LLVM_DYLIB=ON and BUILD_SHARED_LIBS=OFF
this change makes all symbols in the target specific libraries hidden
by default.
A new macro called LLVM_EXTERNAL_VISIBILITY has been added to mark symbols in these
libraries public, which is mainly needed for the definitions of the
LLVMInitialize* functions.
This patch reduces the number of public symbols in libLLVM.so by about
25%. This should improve load times for the dynamic library and also
make abi checker tools, like abidiff require less memory when analyzing
libLLVM.so
One side-effect of this change is that for builds with
LLVM_BUILD_LLVM_DYLIB=ON and LLVM_LINK_LLVM_DYLIB=ON some unittests that
access symbols that are no longer public will need to be statically linked.
Before and after public symbol counts (using gcc 8.2.1, ld.bfd 2.31.1):
nm before/libLLVM-9svn.so | grep ' [A-Zuvw] ' | wc -l
36221
nm after/libLLVM-9svn.so | grep ' [A-Zuvw] ' | wc -l
26278
Reviewers: chandlerc, beanz, mgorny, rnk, hans
Reviewed By: rnk, hans
Subscribers: merge_guards_bot, luismarques, smeenai, ldionne, lenary, s.egerton, pzheng, sameer.abuasal, MaskRay, wuzish, echristo, Jim, hiraditya, michaelplatings, chapuni, jholewinski, arsenm, dschuff, jyknight, dylanmckay, sdardis, nemanjai, jvesely, javed.absar, sbc100, jgravelle-google, aheejin, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, zzheng, edward-jones, mgrang, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, kristina, jsji, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D54439
The argument is llvm::null() everywhere except llvm::errs() in
llvm-objdump in -DLLVM_ENABLE_ASSERTIONS=On builds. It is used by no
target but X86 in -DLLVM_ENABLE_ASSERTIONS=On builds.
If we ever have the needs to add verbose log to disassemblers, we can
record log with a member function, instead of passing it around as an
argument.
Summary:
Most libraries are defined in the lib/ directory but there are also a
few libraries defined in tools/ e.g. libLLVM, libLTO. I'm defining
"Component Libraries" as libraries defined in lib/ that may be included in
libLLVM.so. Explicitly marking the libraries in lib/ as component
libraries allows us to remove some fragile checks that attempt to
differentiate between lib/ libraries and tools/ libraires:
1. In tools/llvm-shlib, because
llvm_map_components_to_libnames(LIB_NAMES "all") returned a list of
all libraries defined in the whole project, there was custom code
needed to filter out libraries defined in tools/, none of which should
be included in libLLVM.so. This code assumed that any library
defined as static was from lib/ and everything else should be
excluded.
With this change, llvm_map_components_to_libnames(LIB_NAMES, "all")
only returns libraries that have been added to the LLVM_COMPONENT_LIBS
global cmake property, so this custom filtering logic can be removed.
Doing this also fixes the build with BUILD_SHARED_LIBS=ON
and LLVM_BUILD_LLVM_DYLIB=ON.
2. There was some code in llvm_add_library that assumed that
libraries defined in lib/ would not have LLVM_LINK_COMPONENTS or
ARG_LINK_COMPONENTS set. This is only true because libraries
defined lib lib/ use LLVMBuild.txt and don't set these values.
This code has been fixed now to check if the library has been
explicitly marked as a component library, which should now make it
easier to remove LLVMBuild at some point in the future.
I have tested this patch on Windows, MacOS and Linux with release builds
and the following combinations of CMake options:
- "" (No options)
- -DLLVM_BUILD_LLVM_DYLIB=ON
- -DLLVM_LINK_LLVM_DYLIB=ON
- -DBUILD_SHARED_LIBS=ON
- -DBUILD_SHARED_LIBS=ON -DLLVM_BUILD_LLVM_DYLIB=ON
- -DBUILD_SHARED_LIBS=ON -DLLVM_LINK_LLVM_DYLIB=ON
Reviewers: beanz, smeenai, compnerd, phosek
Reviewed By: beanz
Subscribers: wuzish, jholewinski, arsenm, dschuff, jyknight, dylanmckay, sdardis, nemanjai, jvesely, nhaehnle, mgorny, mehdi_amini, sbc100, jgravelle-google, hiraditya, aheejin, fedor.sergeev, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, atanasyan, steven_wu, rogfer01, MartinMosbeck, brucehoult, the_o, dexonsmith, PkmX, jocewei, jsji, dang, Jim, lenary, s.egerton, pzheng, sameer.abuasal, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70179
addOperand() method of AMDGPU disassembler returns SoftFail
on error. All instances which may lead to that place are
an impossible encdoing, not something which is possible to
encode, but semantically incorrect as described for SoftFail.
Then tablegen generates a check of the following form:
if (Decode...(..) == MCDisassembler::Fail) { return MCDisassembler::Fail; }
Since we can only return Success and SoftFail that is dead
code as detected by the static code analyzer.
Solution: return Fail as it should be.
See https://bugs.llvm.org/show_bug.cgi?id=43886
Differential Revision: https://reviews.llvm.org/D69819
This reverts r362990 (git commit 374571301dc8e9bc9fdd1d70f86015de198673bd)
This was causing linker warnings on Darwin:
ld: warning: direct access in function 'llvm::initializeEvexToVexInstPassPass(llvm::PassRegistry&)'
from file '../../lib/libLLVMX86CodeGen.a(X86EvexToVex.cpp.o)' to global weak symbol
'void std::__1::__call_once_proxy<std::__1::tuple<void* (&)(llvm::PassRegistry&),
std::__1::reference_wrapper<llvm::PassRegistry>&&> >(void*)' from file '../../lib/libLLVMCore.a(Verifier.cpp.o)'
means the weak symbol cannot be overridden at runtime. This was likely caused by different translation
units being compiled with different visibility settings.
llvm-svn: 363028
Summary:
For builds with LLVM_BUILD_LLVM_DYLIB=ON and BUILD_SHARED_LIBS=OFF
this change makes all symbols in the target specific libraries hidden
by default.
A new macro called LLVM_EXTERNAL_VISIBILITY has been added to mark symbols in these
libraries public, which is mainly needed for the definitions of the
LLVMInitialize* functions.
This patch reduces the number of public symbols in libLLVM.so by about
25%. This should improve load times for the dynamic library and also
make abi checker tools, like abidiff require less memory when analyzing
libLLVM.so
One side-effect of this change is that for builds with
LLVM_BUILD_LLVM_DYLIB=ON and LLVM_LINK_LLVM_DYLIB=ON some unittests that
access symbols that are no longer public will need to be statically linked.
Before and after public symbol counts (using gcc 8.2.1, ld.bfd 2.31.1):
nm before/libLLVM-9svn.so | grep ' [A-Zuvw] ' | wc -l
36221
nm after/libLLVM-9svn.so | grep ' [A-Zuvw] ' | wc -l
26278
Reviewers: chandlerc, beanz, mgorny, rnk, hans
Reviewed By: rnk, hans
Subscribers: Jim, hiraditya, michaelplatings, chapuni, jholewinski, arsenm, dschuff, jyknight, dylanmckay, sdardis, nemanjai, jvesely, nhaehnle, javed.absar, sbc100, jgravelle-google, aheejin, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, zzheng, edward-jones, mgrang, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, kristina, jsji, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D54439
llvm-svn: 362990
Keep it optional in cases this is ever needed in some global
context. Currently it's only used for getting an upper bound inline
asm code size.
For AMDGPU, gfx10 increases the maximum instruction size to
20-bytes. This avoids penalizing older subtargets when estimating code
size, and making some annoying branch relaxation test adjustments.
llvm-svn: 361405
Move the declarations of getThe<Name>Target() functions into a new header in
TargetInfo and make users of these functions include this new header.
This fixes a layering problem.
llvm-svn: 360713
