The dst/dstt/dstst/dststt instructions are nop's on all PowerPC
cores that AIX supports. The AIX assembler also does not accept
these mnemonics. Turn them into nop's on AIX (similar to dstall).
Summary:
The bit order of the has_vec and longtbtable bits in the traceback table generated by the XL compiler flipped at some point after v12.1. This is different from the definition is the AIX header debug.h. The change in the XL compiler that caused the deviation from the OS header definition was unintentional. Since both orderings are extant and the XL compiler runtime also expects the ordering defined by the OS, we will correct the output from LLVM to match the defined ordering given by the OS (which is also consistent with the Assembler Language Reference). Mitigation for traceback tables encoded with the wrong ordering is required for either ordering.
Reviewers: XingXue, HubertTong
Differential Revision: https://reviews.llvm.org/D105487
Summary:
in the patch https://reviews.llvm.org/D103651 [AIX][XCOFF] generate eh_info when vector registers are saved according to the traceback table.
when generate eh_info, it switch to other section, when it done, it need to switch back to text section again.
Reviewers: Jason Liu
Differential Revision: https://reviews.llvm.org/105195
Summary:
generate eh_info when vector registers are saved according to the traceback table.
struct eh_info_t {
unsigned version; /* EH info version 0 */
#if defined(64BIT)
char _pad[4]; /* padding */
#endif
unsigned long lsda; /* Pointer to Language Specific Data Area */
unsigned long personality; /* Pointer to the personality routine */
};
the value of lsda and personality is zero when the number of vector registers saved is large zero and there is not personality of the function
Reviewers: Jason Liu
Differential Revision: https://reviews.llvm.org/D103651
We will need to set the ssp canary bit in traceback table to communicate
with unwinder about the canary.
Reviewed By: #powerpc, shchenz
Differential Revision: https://reviews.llvm.org/D103202
This is the first in a series of patches to provide builtins for
compatibility with the XL compiler. Most of the builtins already had
intrinsics and only needed to be implemented in the front end.
Intrinsics were created for the three iospace builtins, eieio, and icbt.
Pseudo instructions were created for eieio and iospace_eieio to
ensure that nops were inserted before the eieio instruction.
Reviewed By: nemanjai, #powerpc
Differential Revision: https://reviews.llvm.org/D102443
We are using TOCEntry symbols like `LC..0` in TOC loads,
this is hard to read , at least requiring an additional step to figure
out the loaded symbols.
We should print out the name in comments.
Reviewed By: #powerpc, shchenz
Differential Revision: https://reviews.llvm.org/D102949
The default AsmPrinter print GV in comments,
AIX should do so too.
This also fix LLVM :: CodeGen/Generic/inline-asm-mem-clobber.ll.
Reviewed By: hubert.reinterpretcast
Differential Revision: https://reviews.llvm.org/D102534
Summary:
This patch implements the backend implementation of adding global variables
directly to the table of contents (TOC), rather than adding the address of the
variable to the TOC.
Currently, this patch will look for the "toc-data" attribute on symbols in the
IR, and then add those symbols to the TOC.
ATM, this is implemented for 32 bit AIX.
Reviewers: sfertile
Differential Revision: https://reviews.llvm.org/D101178
- Add new variantKinds for the symbol's variable offset and region handle
- Print the proper relocation specifier @gd in the asm streamer when emitting
the TC Entry for the variable offset for the symbol
- Fix the switch section failure between the TC Entry of variable offset and
region handle
- Put .__tls_get_addr symbol in the ProgramCodeSects with XTY_ER property
Reviewed by: sfertile
Differential Revision: https://reviews.llvm.org/D100956
Add support for the TLS general dynamic access model to assembly
files on AIX 64-bit.
Reviewed By: sfertile
Differential Revision: https://reviews.llvm.org/D98078
Adds support for the TLS general dynamic access model to
assembly files on AIX 32-bit.
To generate the correct code sequence when accessing a TLS variable
`v`, we first create two TOC entry nodes, one for the variable offset, one
for the region handle. These nodes are followed by a `PPCISD::TLSGD_AIX`
node (new node introduced by this patch).
The `PPCISD::TLSGD_AIX` node (`TLSGDAIX` pseudo instruction) is
expanded to 2 copies (to put the variable offset and region handle in
the right registers) and a call to `__tls_get_addr`.
This patch also changes the way TC entries are generated in asm files.
If the generated TC entry is for the region handle of a TLS variable,
we add the `@m` relocation and the `.` prefix to the entry name.
For example:
```
L..C0:
.tc .v[TC],v[TL]@m -> region handle
L..C1:
.tc v[TC],v[TL] -> variable offset
```
Reviewed By: nemanjai, sfertile
Differential Revision: https://reviews.llvm.org/D97948
This patch allows generating TLS variables in assembly files on AIX.
Initialized and external uninitialized variables are generated with the
.csect pseudo-op and local uninitialized variables are generated with
the .comm/.lcomm pseudo-ops. The patch also adds a check to
explicitly say that TLS is not yet supported on AIX.
Reviewed by: daltenty, jasonliu, lei, nemanjai, sfertile
Originally patched by: bsaleil
Commandeered by: NeHuang
Differential Revision: https://reviews.llvm.org/D96184
We currently represent TOC entries by an MCSymbol. This is not enough in some situations.
For example, when accessing an initialized TLS variable v on AIX using the general dynamic
model, we need to generate the two following entries for v:
.tc .v[TC],v@m
.tc v[TC],v
One is for the region handle (with the @m relocation), the other is for the variable offset.
This refactoring allows storing several entries for the same symbol with different VariantKind
in the TOC. If the VariantKind is not specified, we default to VK_None.
The AIX TLS implementation using this refactoring to generate the two entries will be posted
in a subsequent patch.
Patched By: bsaleil
Reviewed By: sfertile
Differential Revision: https://reviews.llvm.org/D96346
Add a triple for powerpcle-*-*.
This is a little-endian encoding of the 32-bit PowerPC ABI, useful in certain niche situations:
1) A loader such as the FreeBSD loader which will be loading a little endian kernel. This is required for PowerPC64LE to load properly in pseries VMs.
Such a loader is implemented as a freestanding ELF32 LSB binary.
2) Userspace emulation of a 32-bit LE architecture such as x86 on 64-bit hosts such as PowerPC64LE with tools like box86 requires having a 32-bit LE toolchain and library set, as they operate by translating only the main binary and switching to native code when making library calls.
3) The Void Linux for PowerPC project is experimenting with running an entire powerpcle userland.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D93918
SUMMARY:
In order for the runtime on AIX to find the compact unwind section(EHInfo table),
we would need to set the following on the traceback table:
The 6th byte's longtbtable field to true to signal there is an Extended TB Table Flag.
The Extended TB Table Flag to be 0x08 to signal there is an exception handling info presents.
Emit the offset between ehinfo TC entry and TOC base after all other optional portions of traceback table.
The patch is authored by Jason Liu.
Reviewers: David Tenty, Digger Lin
Differential Revision: https://reviews.llvm.org/D92766
SUMMARY:
1. added a new option -xcoff-traceback-table to control whether generate traceback table for function.
2. implement the functionality of emit traceback table of a function.
Reviewers: hubert.reinterpretcast, Jason Liu
Differential Revision: https://reviews.llvm.org/D92398
Summary:
AIX uses the existing EH infrastructure in clang and llvm.
The major differences would be
1. AIX do not have CFI instructions.
2. AIX uses a new personality routine, named __xlcxx_personality_v1.
It doesn't use the GCC personality rountine, because the
interoperability is not there yet on AIX.
3. AIX do not use eh_frame sections. Instead, it would use a eh_info
section (compat unwind section) to store the information about
personality routine and LSDA data address.
Reviewed By: daltenty, hubert.reinterpretcast
Differential Revision: https://reviews.llvm.org/D91455
Continue the work started at D50989.
The code has been long dead since the triple has been removed (D75494).
Reviewed By: nickdesaulniers, void
Differential Revision: https://reviews.llvm.org/D91836
New pseudo instructions GETtlsADDRPCREL and GETtlsldADDRPCREL are added for properly
setting REGMASK for tls_get_addr function when using PCRelative address.
Differential Revisien: https://reviews.llvm.org/D91420
Reviewed by: bsaleil
Support reserved [0-100] and non-reserved[101-65535] Clang/GNU init
priority values on AIX.
This patch maps Clang/GNU values into priority values used in sinit/sterm
functions. User can play with values and be able to get init to occur
before or after XL init and vice versa.
Differential Revision: https://reviews.llvm.org/D91272
SUMMARY:
In IBM compiler xlclang , there is an option -fnovisibility which suppresses visibility. For more details see: https://www.ibm.com/support/knowledgecenter/SSGH3R_16.1.0/com.ibm.xlcpp161.aix.doc/compiler_ref/opt_visibility.html.
We need to add the option -mignore-xcoff-visibility for compatibility with the IBM AIX OS (as the option is enabled by default in AIX). With this option llvm does not emit any visibility attribute to ASM or XCOFF object file.
The option only work on the AIX OS, for other non-AIX OS using the option will report an unsupported options error.
In AIX OS:
1.1 the option -mignore-xcoff-visibility is enabled by default , if there is not -fvisibility=* and -mignore-xcoff-visibility explicitly in the clang command .
1.2 if there is -fvisibility=* explicitly but not -mignore-xcoff-visibility explicitly in the clang command. it will generate visibility attributes.
1.3 if there are both -fvisibility=* and -mignore-xcoff-visibility explicitly in the clang command. The option "-mignore-xcoff-visibility" wins , it do not emit the visibility attribute.
The option -mignore-xcoff-visibility has no effect on visibility attribute when compile with -emit-llvm option to generated LLVM IR.
Reviewer: daltenty,Jason Liu
Differential Revision: https://reviews.llvm.org/D87451
Summary:
Some design decision worth noting about:
I've noticed a recent mailing discussing about why string literal is
not affected by -fdata-sections for ELF target:
http://lists.llvm.org/pipermail/llvm-dev/2020-September/145121.html
But on AIX, our linker could not split the mergeable string like other target.
So I think it would make more sense for us to emit separate csect for
every mergeable string in -fdata-sections mode,
as there might not be other ways for linker to do garbage collection
on unused mergeable string.
Reviewed By: daltenty, hubert.reinterpretcast
Differential Revision: https://reviews.llvm.org/D88339
This patch is the initial support for the Local Dynamic Thread Local Storage
model to produce code sequence and relocation correct to the ABI for the model
when using PC relative memory operations.
Differential Revision: https://reviews.llvm.org/D87721
Summary:
In small code model, AIX assembler could not deal with labels that
could not be reached within the [-0x8000, 0x8000) range from TOC base.
So when generating the assembly, we would need to help the assembler
by subtracting an offset from the label to keep the actual value
within [-0x8000, 0x8000).
Reviewed By: hubert.reinterpretcast, Xiangling_L
Differential Revision: https://reviews.llvm.org/D86879
Without the fix gcc 7.4 warns with
../lib/Target/PowerPC/PPCAsmPrinter.cpp: In member function 'void {anonymous}::PPCAsmPrinter::EmitTlsCall(const llvm::MachineInstr*, llvm::MCSymbolRefExpr::VariantKind)':
../lib/Target/PowerPC/PPCAsmPrinter.cpp:525:53: warning: enumeral and non-enumeral type in conditional expression [-Wextra]
MCInstBuilder(Subtarget->isPPC64() ? Opcode : PPC::BL_TLS)
~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~
This patch is the initial support for the General Dynamic Thread Local
Local Storage model to produce code sequence and relocations correct
to the ABI for the model when using PC relative memory operations.
Patch by: NeHuang
Reviewed By: stefanp
Differential Revision: https://reviews.llvm.org/D82315
Summary:
This is a follow up for D82481. For .lcomm directive, although it's
not necessary to have .rename emitted, it's still desirable to do
it so that we do not see internal 'Rename..' gets print out in
symbol table. And we could have consistent naming between TC entry
and .lcomm. And also have consistent naming between IR and final
object file.
Reviewed By: hubert.reinterpretcast
Differential Revision: https://reviews.llvm.org/D86075
A unique module id, which is a part of sinit and sterm function names, is
necessary to be unique. However, `getUniqueModuleId` will fail if there is
no strong external symbol within a module. We turn to use Pid and timestamp
when this happens.
Differential Revision: https://reviews.llvm.org/D85527
SUMMARY:
1. in the patch , remove setting storageclass in function .getXCOFFSection and construct function of class MCSectionXCOFF
there are
XCOFF::StorageMappingClass MappingClass;
XCOFF::SymbolType Type;
XCOFF::StorageClass StorageClass;
in the MCSectionXCOFF class,
these attribute only used in the XCOFFObjectWriter, (asm path do not need the StorageClass)
we need get the value of StorageClass, Type,MappingClass before we invoke the getXCOFFSection every time.
actually , we can get the StorageClass of the MCSectionXCOFF from it's delegated symbol.
2. we also change the oprand of branch instruction from symbol name to qualify symbol name.
for example change
bl .foo
extern .foo
to
bl .foo[PR]
extern .foo[PR]
3. and if there is reference indirect call a function bar.
we also add
extern .bar[PR]
Reviewers: Jason liu, Xiangling Liao
Differential Revision: https://reviews.llvm.org/D84765
Summary:
Use TE SMC instead of TC SMC in large code model mode,
so that large code model TOC entries could get placed after all
the small code model TOC entries, which reduces the chance of TOC overflow.
Reviewed By: Xiangling_L
Differential Revision: https://reviews.llvm.org/D85455
On the frontend side, this patch recovers AIX static init implementation to
use the linkage type and function names Clang chooses for sinit related function.
On the backend side, this patch sets correct linkage and function names on aliases
created for sinit/sterm functions.
Differential Revision: https://reviews.llvm.org/D84534
Summary:
This patch implements -ffunction-sections on AIX.
This patch focuses on assembly generation.
Follow-on patch needs to handle:
1. -ffunction-sections implication for jump table.
2. Object file generation path and associated testing.
Differential Revision: https://reviews.llvm.org/D83875
For now, just return and do nothing when we see llvm.used and
llvm.compiler.used global array.
Hopefully, we could come up with a good solution later to prevent
linker from eliminating symbols in llvm.used array.
Reviewed By: DiggerLin, daltenty
Differential Revision: https://reviews.llvm.org/D84363
Summary:
AIX assembly's .set directive is not usable for aliasing purpose.
We need to use extra-label-at-defintion strategy to generate symbol
aliasing on AIX.
Reviewed By: DiggerLin, Xiangling_L
Differential Revision: https://reviews.llvm.org/D83252
SUMMARY:
when we call memset, memcopy,memmove etc(this are llvm intrinsic function) in the c source code. the llvm will generate IR
like call call void @llvm.memset.p0i8.i32(i8* align 4 bitcast (%struct.S* @s to i8*), i8 %1, i32 %2, i1 false)
for c source code
bash> cat test_memset.call
struct S{
int a;
int b;
};
extern struct S s;
void bar() {
memset(&s, s.b, s.b);
}
like
%struct.S = type { i32, i32 }
@s = external global %struct.S, align 4
; Function Attrs: noinline nounwind optnone
define void @bar() #0 {
entry:
%0 = load i32, i32* getelementptr inbounds (%struct.S, %struct.S* @s, i32 0, i32 1), align 4
%1 = trunc i32 %0 to i8
%2 = load i32, i32* getelementptr inbounds (%struct.S, %struct.S* @s, i32 0, i32 1), align 4
call void @llvm.memset.p0i8.i32(i8* align 4 bitcast (%struct.S* @s to i8*), i8 %1, i32 %2, i1 false)
ret void
}
declare void @llvm.memset.p0i8.i32(i8* nocapture writeonly, i8, i32, i1 immarg) #1
If we want to let the aix as assembly compile pass without -u
it need to has following assembly code.
.extern .memset
(we do not output extern linkage for llvm instrinsic function.
even if we output the extern linkage for llvm intrinsic function, we should not out .extern llvm.memset.p0i8.i32,
instead of we should emit .extern memset)
for other llvm buildin function floatdidf . even if we do not call these function floatdidf in the c source code(the generated IR also do not the call __floatdidf . the function call
was generated in the LLVM optimized.
the function is not in the functions list of Module, but we still need to emit extern .__floatdidf
The solution for it as :
We record all the lllvm intrinsic extern symbol when transformCallee(), and emit all these symbol in the AsmPrinter::doFinalization(Module &M)
Reviewers: jasonliu, Sean Fertile, hubert.reinterpretcast,
Differential Revision: https://reviews.llvm.org/D78929
Summary:
When a desired symbol name contains invalid character that the
system assembler could not process, we need to emit .rename
directive in assembly path in order for that desired symbol name
to appear in the symbol table.
Reviewed By: hubert.reinterpretcast, DiggerLin, daltenty, Xiangling_L
Differential Revision: https://reviews.llvm.org/D82481
