These were misleading, they're more of a "clear" than an "invalidate".
We shouldn't be individually clearing analysis results. Either we clear
all analyses when some IR becomes invalid, or we properly go through
invalidation.
There was only one use of this, which can be simulated with
AM.invalidate(F, PA).
Reviewed By: mtrofin
Differential Revision: https://reviews.llvm.org/D100519
IsSigned and its accessor, isSigned, were introduced on Oct 25, 2017
in commit 9ac7021a2563d433549a21990f96184d413e69e2. The last use was
removed on Nov 20, 2017 in commit
268467869b99b15a15f81bf009d31e11536bef39.
In the last change to IRCE the BPI is ignored if BFI is present, however
BFI and BPI have a different thresholds. Specifically BPI approach checks only
latch exit probability so it is expected if the loop has only one exit block (latch)
the behavior with BFI and BPI should be the same,
BPI approach by default uses threshold 10, so it considers the loop with estimated
number of iterations less then 10 should not be considered for IRCE optimization.
BFI approach uses the default value 3 and this is inconsistent.
The CL modifies the code to use the same threshold for both approaches..
The test is updated due to it has two side-exits (except latch) and each of them has a
probability 1/16, so BFI estimates the number of runtime iteration is about to 7
(1/16 + 1/16 + some for latch) and test fails.
Reviewers: mkazantsev, ebrevnov
Reviewed By: mkazantsev
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D91230
Use BFI if it is available and BPI otherwise.
This is a promised follow-up after D89541.
Reviewers: ebrevnov, mkazantsev
Reviewed By: ebrevnov
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D89773
IRCE has some overhead for runtime checks and in case number of iteration is small
the overhead can kill the benefit from optimizations.
This CL bases on BlockFrequencyInfo of pre-header and header to estimate the
number of loop iterations. If it is less than irce-min-estimated-iters we do not transform the loop.
Probably it is better to make more complex cost model but for simplicity it seems the be enough.
The usage of BFI is added only for new pass manager and tries to use it efficiently.
Reviewers: ebrevnov, dantrushin, asbirlea, mkazantsev
Reviewed By: mkazantsev
Subscribers: llvm-commits, fhahn
Differential Revision: https://reviews.llvm.org/D89541
SCEVExpander modifies the underlying function so it is more suitable in
Transforms/Utils, rather than Analysis. This allows using other
transform utils in SCEVExpander.
This patch was originally committed as b8a3c34eee06, but broke the
modules build, as LoopAccessAnalysis was using the Expander.
The code-gen part of LAA was moved to lib/Transforms recently, so this
patch can be landed again.
Reviewers: sanjoy.google, efriedma, reames
Reviewed By: sanjoy.google
Differential Revision: https://reviews.llvm.org/D71537
Summary: There is no need to create BPI explicitly. It should be requested through AM in a normal way.
Reviewers: skatkov
Reviewed By: skatkov
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D79080
Summary: Currenlty BPI unconditionally creates post dominator tree each time. While this is not incorrect we can save compile time by reusing existing post dominator tree (when it's valid) provided by analysis manager.
Reviewers: skatkov, taewookoh, yrouban
Reviewed By: skatkov
Subscribers: hiraditya, steven_wu, dexonsmith, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78987
IRCE pass checks that it can calculate loop bounds by checking
SCEV availability at loop entry. However it is possible that loop
bound SCEV is loop invariant, but instruction used to compute it
resides within loop. In such case adjusting loop bound in preheader
using IRBuilder leads to malformed SSA.
Use SCEVExpander instead to generate proper instructions.
Reviewed-by: mkazantsev
Differential Revision: https://reviews.llvm.org/D73496
SCEVExpander modifies the underlying function so it is more suitable in
Transforms/Utils, rather than Analysis. This allows using other
transform utils in SCEVExpander.
Reviewers: sanjoy.google, efriedma, reames
Reviewed By: sanjoy.google
Differential Revision: https://reviews.llvm.org/D71537
This file lists every pass in LLVM, and is included by Pass.h, which is
very popular. Every time we add, remove, or rename a pass in LLVM, it
caused lots of recompilation.
I found this fact by looking at this table, which is sorted by the
number of times a file was changed over the last 100,000 git commits
multiplied by the number of object files that depend on it in the
current checkout:
recompiles touches affected_files header
342380 95 3604 llvm/include/llvm/ADT/STLExtras.h
314730 234 1345 llvm/include/llvm/InitializePasses.h
307036 118 2602 llvm/include/llvm/ADT/APInt.h
213049 59 3611 llvm/include/llvm/Support/MathExtras.h
170422 47 3626 llvm/include/llvm/Support/Compiler.h
162225 45 3605 llvm/include/llvm/ADT/Optional.h
158319 63 2513 llvm/include/llvm/ADT/Triple.h
140322 39 3598 llvm/include/llvm/ADT/StringRef.h
137647 59 2333 llvm/include/llvm/Support/Error.h
131619 73 1803 llvm/include/llvm/Support/FileSystem.h
Before this change, touching InitializePasses.h would cause 1345 files
to recompile. After this change, touching it only causes 550 compiles in
an incremental rebuild.
Reviewers: bkramer, asbirlea, bollu, jdoerfert
Differential Revision: https://reviews.llvm.org/D70211
Summary:
There is PHINode::getBasicBlockIndex() and PHINode::setIncomingValue()
but no function to replace incoming value for a specified BasicBlock*
predecessor.
Clearly, there are a lot of places that could use that functionality.
Reviewer: craig.topper, lebedev.ri, Meinersbur, kbarton, fhahn
Reviewed By: Meinersbur, fhahn
Subscribers: fhahn, hiraditya, zzheng, jsji, llvm-commits
Tag: LLVM
Differential Revision: https://reviews.llvm.org/D63338
llvm-svn: 363566
Summary:
Preserve MemorySSA in LoopSimplify, in the old pass manager, if the analysis is available.
Do not preserve it in the new pass manager.
Update tests.
Subscribers: nemanjai, jlebar, javed.absar, Prazek, kbarton, zzheng, jsji, llvm-commits, george.burgess.iv, chandlerc
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60833
llvm-svn: 360270
Summary:
It is a common thing to loop over every `PHINode` in some `BasicBlock`
and change old `BasicBlock` incoming block to a new `BasicBlock` incoming block.
`replaceSuccessorsPhiUsesWith()` already had code to do that,
it just wasn't a function.
So outline it into a new function, and use it.
Reviewers: chandlerc, craig.topper, spatel, danielcdh
Reviewed By: craig.topper
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61013
llvm-svn: 359996
Summary:
There is `PHINode::getBasicBlockIndex()`, `PHINode::setIncomingBlock()`
and `PHINode::getNumOperands()`, but no function to replace every
specified `BasicBlock*` predecessor with some other specified `BasicBlock*`.
Clearly, there are a lot of places that could use that functionality.
Reviewers: chandlerc, craig.topper, spatel, danielcdh
Reviewed By: craig.topper
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61011
llvm-svn: 359995
This patch relaxes restrictions on types of latch condition and range check.
In current implementation, they should match. This patch allows to handle
wide range checks against narrow condition. The motivating example is the
following:
int N = ...
for (long i = 0; (int) i < N; i++) {
if (i >= length) deopt;
}
In this patch, the option that enables this support is turned off by
default. We'll wait until it is switched to true.
Differential Revision: https://reviews.llvm.org/D56837
Reviewed By: reames
llvm-svn: 351926
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
In the patch rL329547, we have lifted the over-restrictive limitation on collected range
checks, allowing to work with range checks with the end of their range not being
provably non-negative. However it appeared that the non-negativity of this value was
assumed in the utility function `ClampedSubtract`. In particular, its reasoning is based
on the fact that `0 <= SINT_MAX - X`, which is not true if `X` is negative.
The function `ClampedSubtract` is only called twice, once with `X = 0` (which is OK)
and the second time with `X = IRC.getEnd()`, where we may now see the problem if
the end is actually a negative value. In this case, we may sometimes miscompile.
This patch is the conservative fix of the miscompile problem. Rather than rejecting
non-provably non-negative `getEnd()` values, we will check it for non-negativity in
runtime. For this, we use function `smax(smin(X, 0), -1) + 1` that is equal to `1` if `X`
is non-negative and is equal to 0 if `X` is negative. If we multiply `Begin, End` of safe
iteration space by this function calculated for `X = IRC.getEnd()`, we will get the original
`[Begin, End)` if `IRC.getEnd()` was non-negative (and, thus, `ClampedSubtract` worked
correctly) and the empty range `[0, 0)` in case if ` IRC.getEnd()` was negative.
So we in fact prohibit execution of the main loop if at least one of range checks was
made against a negative value (and we figured it out in runtime). It is still better than
what we have before (non-negativity had to be proved in compile time) and prevents
us from miscompile, however it is sometiles too restrictive for unsigned range checks
against a negative value (which in fact can be eliminated).
Once we re-implement `ClampedSubtract` in a way that it handles negative `X` correctly,
this limitation can be lifted, too.
Differential Revision: https://reviews.llvm.org/D46860
Reviewed By: samparker
llvm-svn: 332809
The DEBUG() macro is very generic so it might clash with other projects.
The renaming was done as follows:
- git grep -l 'DEBUG' | xargs sed -i 's/\bDEBUG\s\?(/LLVM_DEBUG(/g'
- git diff -U0 master | ../clang/tools/clang-format/clang-format-diff.py -i -p1 -style LLVM
- Manual change to APInt
- Manually chage DOCS as regex doesn't match it.
In the transition period the DEBUG() macro is still present and aliased
to the LLVM_DEBUG() one.
Differential Revision: https://reviews.llvm.org/D43624
llvm-svn: 332240
After investigation discussed in D45439, it would seem that the nsw
flag restriction is unnecessary in most cases. So the IsInductionVar
lambda has been removed, the functionality extracted, and now only
require nsw when using eq/ne predicates.
Differential Revision: https://reviews.llvm.org/D45617
llvm-svn: 330256
Created a helper function to query for non negative SCEVs. Uses the
SGE predicate to catch constants that could be interpreted as
negative.
Differential Revision: https://reviews.llvm.org/D45481
llvm-svn: 329907
In IRCE, we have a very old legacy check that works when we collect comparisons that we
treat as range checks. It ensures that the value against which the indvar is compared is
loop invariant and is also positive.
This latter condition remained there since the times when IRCE was only able to handle
signed latch comparison. As the optimization evolved, it now learned how to intersect
signed or unsigned ranges, and this logic has no reliance on the fact that the right border
of each range should be positive.
The old implementation of this non-negativity check was also naive enough and just looked
into ranges (while most of other IRCE logic tries to use power of SCEV implications), so this
check did not allow to deal with the most simple case that looks like follows:
int size; // not known non-negative
int length; //known non-negative;
i = 0;
if (size != 0) {
do {
range_check(i < size);
range_check(i < length);
++i;
} while (i < size)
}
In this case, even if from some dominating conditions IRCE could parse loop
structure, it could only remove the range check against `length` and simply
ignored the check against `size`.
In this patch we remove this obsolete check. It will allow IRCE to pick comparison
against `size` as a potential range check and then let Range Intersection logic
decide whether it is OK to eliminate it or not.
Differential Revision: https://reviews.llvm.org/D45362
Reviewed By: samparker
llvm-svn: 329547
As a follow-up to r328480, this updates the logic for the decreasing
safety checks in a similar manner:
- CanBeMax is replaced by CannotBeMaxInLoop which queries
isLoopEntryGuardedByCond on the maximum value.
- SumCanReachMin is replaced by isSafeDecreasingBound which includes
some logic from parseLoopStructure and, again, has been updated to
use isLoopEntryGuardedByCond on the given bounds.
Differential Revision: https://reviews.llvm.org/D44776
llvm-svn: 328613
CanBeMin is currently used which will report true for any unknown
values, but often a check is performed outside the loop which covers
this situation:
for (int i = 0; i < N; ++i)
...
if (N > 0)
for (int i = 0; i < N; ++i)
...
So I've add 'LoopGuardedAgainstMin' which reports whether N is
greater than the minimum value which then allows loop with a variable
loop count to be optimised. I've also moved the increasing bound
checking into its own function and replaced SumCanReachMax is another
isLoopEntryGuardedByCond function.
llvm-svn: 328480
There are two nontrivial details here:
* Loop structure update interface is quite different with new pass manager,
so the code to add new loops was factored out
* BranchProbabilityInfo is not a loop analysis, so it can not be just getResult'ed from
within the loop pass. It cant even be queried through getCachedResult as LoopCanonicalization
sequence (e.g. LoopSimplify) might invalidate BPI results.
Complete solution for BPI will likely take some time to discuss and figure out,
so for now this was partially solved by making BPI optional in IRCE
(skipping a couple of profitability checks if it is absent).
Most of the IRCE tests got their corresponding new-pass-manager variant enabled.
Only two of them depend on BPI, both marked with TODO, to be turned on when BPI
starts being available for loop passes.
Reviewers: chandlerc, mkazantsev, sanjoy, asbirlea
Reviewed By: mkazantsev
Differential Revision: https://reviews.llvm.org/D43795
llvm-svn: 327619
ScalarEvolution::isKnownPredicate invokes isLoopEntryGuardedByCond without check
that SCEV is available at entry point of the loop. It is incorrect and fixed by patch.
To bugs additionally fixed:
assert is moved after the check whether loop is not a nullptr.
Usage of isLoopEntryGuardedByCond in ScalarEvolution::isImpliedCondOperandsViaNoOverflow
is guarded by isAvailableAtLoopEntry.
Reviewers: sanjoy, mkazantsev, anna, dorit, reames
Reviewed By: mkazantsev
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D42417
llvm-svn: 324204
This patch removes assert that SCEV is able to prove that a value is
non-negative. In fact, SCEV can sometimes be unable to do this because
its cache does not update properly. This assert will be returned once this
problem is resolved.
llvm-svn: 323309
ScalarEvolution::isKnownPredicate invokes isLoopEntryGuardedByCond without check
that SCEV is available at entry point of the loop. It is incorrect and fixed by patch.
Reviewers: sanjoy, mkazantsev, anna, dorit
Reviewed By: mkazantsev
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D42165
llvm-svn: 323077
Currently, IRC contains `Begin` and `Step` as SCEVs and `End` as value.
Aside from that, `End` can also be `nullptr` which can be later conditionally
converted into a non-null SCEV.
To make this logic more transparent, this patch makes `End` a SCEV and
calculates it early, so that it is never a null.
Differential Revision: https://reviews.llvm.org/D39590
llvm-svn: 322364
In a lambda where we expect to have result within bounds, add respective `nsw/nuw` flags to
help SCEV just in case if it fails to figure them out on its own.
Differential Revision: https://reviews.llvm.org/D40168
llvm-svn: 318898
In rL316552, we ban intersection of unsigned latch range with signed range check and vice
versa, unless the entire range check iteration space is known positive. It was a correct
functional fix that saved us from dealing with ambiguous values, but it also appeared
to be a very restrictive limitation. In particular, in the following case:
loop:
%iv = phi i32 [ 0, %preheader ], [ %iv.next, %latch]
%iv.offset = add i32 %iv, 10
%rc = icmp slt i32 %iv.offset, %len
br i1 %rc, label %latch, label %deopt
latch:
%iv.next = add i32 %iv, 11
%cond = icmp i32 ult %iv.next, 100
br it %cond, label %loop, label %exit
Here, the unsigned iteration range is `[0, 100)`, and the safe range for range
check is `[-10, %len - 10)`. For unsigned iteration spaces, we use unsigned
min/max functions for range intersection. Given this, we wanted to avoid dealing
with `-10` because it is interpreted as a very big unsigned value. Semantically, range
check's safe range goes through unsigned border, so in fact it is two disjoint
ranges in IV's iteration space. Intersection of such ranges is not trivial, so we prohibited
this case saying that we are not allowed to intersect such ranges.
What semantics of this safe range actually means is that we can start from `-10` and go
up increasing the `%iv` by one until we reach `%len - 10` (for simplicity let's assume that
`%len - 10` is a reasonably big positive value).
In particular, this safe iteration space includes `0, 1, 2, ..., %len - 11`. So if we were able to return
safe iteration space `[0, %len - 10)`, we could safely intersect it with IV's iteration space. All
values in this range are non-negative, so using signed/unsigned min/max for them is unambiguous.
In this patch, we alter the algorithm of safe range calculation so that it returnes a subset of the
original safe space which is represented by one continuous range that does not go through wrap.
In order to reach this, we use modified SCEV substraction function. It can be imagined as a function
that substracts by `1` (or `-1`) as long as the further substraction does not cause a wrap in IV iteration
space. This allows us to perform IRCE in many situations when we deal with IV space and range check
of different types (in terms of signed/unsigned).
We apply this approach for both matching and not matching types of IV iteration space and the
range check. One implication of this is that now IRCE became smarter in detection of empty safe
ranges. For example, in this case:
loop:
%iv = phi i32 [ %begin, %preheader ], [ %iv.next, %latch]
%iv.offset = sub i32 %iv, 10
%rc = icmp ult i32 %iv.offset, %len
br i1 %rc, label %latch, label %deopt
latch:
%iv.next = add i32 %iv, 11
%cond = icmp i32 ult %iv.next, 100
br it %cond, label %loop, label %exit
If `%len` was less than 10 but SCEV failed to trivially prove that `%begin - 10 >u %len- 10`,
we could end up executing entire loop in safe preloop while the main loop was still generated,
but never executed. Now, cutting the ranges so that if both `begin - 10` and `%len - 10` overflow,
we have a trivially empty range of `[0, 0)`. This in some cases prevents us from meaningless optimization.
Differential Revision: https://reviews.llvm.org/D39954
llvm-svn: 318639
