To lex hash directives we peek ahead to find component tokens, create a
unified token, and unlex the peeked tokens so the parser does not need
to parse the tokens then. Make sure we do not to lex another hash
directive during peek operation.
This fixes PR28921.
Reviewers: rnk, loladiro
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D24839
llvm-svn: 282992
The binder is in a specific section that "reverse" the edges in a
regular dead-stripping: the binder is live as long as a global it
references is live.
This is a big hammer that prevents LLVM from dead-stripping these,
while still allowing linker dead-stripping (with special knowledge
of the section).
Differential Revision: https://reviews.llvm.org/D24673
llvm-svn: 282988
When we create a PDB file using PDBFileBuilder, the information
in the superblock, such as the size of the resulting file, is not
available.
Previously, PDBFileBuilder::initialize took a superblock assuming
that all the members of the struct are correct. That is useful when
you want to restore the exact information from a YAML file, but
that's probably the only use case in which that is useful.
When we are creating a PDB file on the fly, we have to backfill the
members.
This patch redefines PDBFileBuilder::initialize to take only a
block size. Now all the other members are left as default values,
so that they'll be updated when commit() is called.
Differential Revision: https://reviews.llvm.org/D25108
llvm-svn: 282944
We can't use Jcc to leave a Win64 function in general, because that
confuses the unwinder. However, for "leaf" functions, that is, functions
where the return address is always on top of the stack and which don't
have unwind info, it's OK.
Differential Revision: https://reviews.llvm.org/D24836
llvm-svn: 282920
Summary:
In the case below, %Result.i19 is defined between coro.save and coro.suspend and used after coro.suspend. We need to correctly place such a value into the coroutine frame.
```
%save = call token @llvm.coro.save(i8* null)
%Result.i19 = getelementptr inbounds %"struct.lean_future<int>::Awaiter", %"struct.lean_future<int>::Awaiter"* %ref.tmp7, i64 0, i32 0
%suspend = call i8 @llvm.coro.suspend(token %save, i1 false)
switch i8 %suspend, label %exit [
i8 0, label %await.ready
i8 1, label %exit
]
await.ready:
%val = load i32, i32* %Result.i19
```
Reviewers: majnemer
Subscribers: llvm-commits, mehdi_amini
Differential Revision: https://reviews.llvm.org/D24418
llvm-svn: 282902
Summary:
Without the fix, if there was a function inlined into the coroutine with debug information, CloneFunctionInto(NewF, &F, VMap, /*ModuleLevelChanges=*/true, Returns); would duplicate all of the debug information including the DICompileUnit.
We know use VMap to indicate that debug metadata for a File, Unit and FunctionType should not be duplicated when we creating clones that will become f.resume, f.destroy and f.cleanup.
Reviewers: majnemer
Subscribers: mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D24417
llvm-svn: 282899
Summary: Not all coro.subfn.addr intrinsics can be eliminated in CoroElide through devirtualization. Those that remain need to be lowered in CoroCleanup.
Reviewers: majnemer
Subscribers: llvm-commits, mehdi_amini
Differential Revision: https://reviews.llvm.org/D24412
llvm-svn: 282897
Add a OCAML_INSTALL_PATH variable that can be used to control
the install path for OCaml libraries. The new variable defaults to
${OCAML_STDLIB_PATH}, i.e. the OCaml library path obtained from
the OCaml compiler. Install libraries into "llvm" subdirectory.
This fixes two issues:
1. OCaml library directories differ between systems, and 'lib/ocaml' is
incorrect e.g. on amd64 Gentoo where OCaml is installed
in 'lib64/ocaml'. Therefore, obtain the library path from the OCaml
compiler using 'ocamlc -where' (which is already used to set
OCAML_STDLIB_PATH), which is the method used commonly in OCaml packages.
2. The top-level directory is reserved for the standard library, and has
precedence over local directory in search path. As a result, OCaml
preferred the files installed along with previous LLVM version over the
source tree when building a new version, resulting in two versions being
mixed during the build. The new layout is used commonly by other OCaml
packages, and findlib is able to find the LLVM libraries successfully.
Bug: https://bugs.gentoo.org/559134
Bug: https://bugs.gentoo.org/559624
Differential Revision: https://reviews.llvm.org/D24354
llvm-svn: 282895
Summary: Debug info should *not* affect optimization decisions. This patch updates loop unroller cost model to make it not affected by debug info.
Reviewers: davidxl, mzolotukhin
Subscribers: haicheng, llvm-commits, mzolotukhin
Differential Revision: https://reviews.llvm.org/D25098
llvm-svn: 282894
Register stackification currently checks VNInfo for changes. Make that
more accurate by testing each intervening instruction for any other defs
to the same virtual register.
Patch by Jacob Gravelle
Differential Revision: https://reviews.llvm.org/D24942
llvm-svn: 282886
Summary:
This patch is adding the support for a shadow memory with
dynamically allocated address range.
The compiler-rt needs to export a symbol containing the shadow
memory range.
This is required to support ASAN on windows 64-bits.
Reviewers: kcc, rnk, vitalybuka
Subscribers: zaks.anna, kubabrecka, dberris, llvm-commits, chrisha
Differential Revision: https://reviews.llvm.org/D23354
llvm-svn: 282881
When building the steps for scalar induction variables, we previously attempted
to determine if all the scalar users of the induction variable were uniform. If
they were, we would only emit the step corresponding to vector lane zero. This
optimization was too aggressive. We generally don't know the entire set of
induction variable users that will be scalar. We have
isScalarAfterVectorization, but this is only a conservative estimate of the
instructions that will be scalarized. Thus, an induction variable may have
scalar users that aren't already known to be scalar. To avoid emitting unused
steps, we can only check that the induction variable is uniform. This should
fix PR30542.
Reference: https://llvm.org/bugs/show_bug.cgi?id=30542
llvm-svn: 282863
Summary:
Previously, when allocating unspillable live ranges, we would never
attempt to split. We would always bail out and try last ditch graph
recoloring.
This patch changes this by attempting to split all live intervals before
performing recoloring.
This fixes LLVM bug PR14879.
I can't add test cases for any backends other than AVR because none of
them have small enough register classes to trigger the bug.
Reviewers: qcolombet
Subscribers: MatzeB
Differential Revision: https://reviews.llvm.org/D25070
llvm-svn: 282852
If AVX512 is disabled, the registers should already be marked reserved. Pattern predicates and register classes on instructions should take care of most of the rest. Loads/stores and physical register copies for XMM16-31 and YMM16-31 without VLX have already been taken care of.
I'm a little unclear why this changed the register allocation of the SSE2 run of the sad.ll test, but the registers selected appear to be valid after this change.
llvm-svn: 282835
Summary:
We don't want to decay hot callsites to import chains of hot
callsites. The same mechanism is used in LIPO.
Reviewers: tejohnson, eraman, mehdi_amini
Subscribers: llvm-commits, mehdi_amini
Differential Revision: https://reviews.llvm.org/D24976
llvm-svn: 282833
For some reason there are both of these available, except
for scalar 64-bit compares which only has u64. I'm not sure
why there are both (I'm guessing it's for the one bit inputs we
don't use), but for consistency always using the
unsigned one.
llvm-svn: 282832
load command that uses the MachO::entry_point_command type
but not used in llvm libObject code but used in llvm tool code.
This includes just the LC_MAIN load command.
llvm-svn: 282766
The VS debugger doesn't appear to understand the 0x68 or 0x69 type
indices, which were probably intended for use on a platform where a C
'int' is 8 bits. So, use the character types instead. Clang was already
using the character types because '[u]int8_t' is usually defined in
terms of 'char'.
See the Rust issue for screenshots of what VS does:
https://github.com/rust-lang/rust/issues/36646
Fixes PR30552
llvm-svn: 282739
load command that uses the Mach::source_version_command type
but not used in llvm libObject code but used in llvm tool code.
This includes just the LC_SOURCE_VERSION load command.
llvm-svn: 282736
Summary:
Not tunned up heuristic, but with this small heuristic there is about
+0.10% improvement on SPEC 2006
Reviewers: tejohnson, mehdi_amini, eraman
Subscribers: mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D24940
llvm-svn: 282733
This adds new pseudo instructions that can be selected during register allocation to represent loads and stores of XMM/YMM registers when AVX512F is available, but VLX isn't. They will be converted to VEX encoded moves if the register turns out to be XMM0-15/YMM0-15. Otherwise either an EVEX VEXTRACT(store) or VBROADCAST(load) will be used.
Fixes one of the cases from PR29112.
llvm-svn: 282690
Fixes to allow spilling all registers at the end of the block
work with exec modifications. Don't emit s_and_saveexec_b64 for
if lowering, and instead emit copies. Mark control flow mask
instructions as terminators to get correct spill code placement
with fast regalloc, and then have a separate optimization pass
form the saveexec.
This should work if SGPRs are spilled to VGPRs, but
will likely fail in the case that an SGPR spills to memory
and no workitem takes a divergent branch.
llvm-svn: 282667
Summary: AArch64 LLVM assembler emits add instruction without shift bit to calculate the higher 12-bit address of TLS variables in local exec model. This generates wrong code sequence to access TLS variables with thread offset larger than 0x1000.
Reviewers: t.p.northover, peter.smith, rovka
Subscribers: salim.nasser, aemerson, llvm-commits, rengolin
Differential Revision: https://reviews.llvm.org/D24702
llvm-svn: 282661
Summary:
The patch fixes regression caused by two earlier patches D18777 and D18867.
Reviewers: reames, sanjoy
Differential Revision: http://reviews.llvm.org/D24280
From: Li Huang
llvm-svn: 282650
load command that uses the Mach::rpath_command type
but not used in llvm libObject code but used in llvm tool code.
This includes just the LC_RPATH load command.
llvm-svn: 282649
Summary:
Answering any meaningful questions about .sancov files requires
accessing symbol information from the corresponding binary.
This change introduces a separate intermediate data structure and
format: symbolized coverage. It contains all symbol information that
is required to answer common queries:
- merging
- coverd/uncovered files and functions
- line status.
Also removing the html report functionality from sancov: generated
HTML files are too huge, and a different approach is required.
Maintaining this half-working approach in the C++ is painful.
Differential Revision: https://reviews.llvm.org/D24947
llvm-svn: 282639
other load commands that use the Mach::version_min_command type
but not used in llvm libObject code but used in llvm tool code.
This includes LC_VERSION_MIN_MACOSX, LC_VERSION_MIN_IPHONEOS,
LC_VERSION_MIN_TVOS and LC_VERSION_MIN_WATCHOS load commands.
llvm-svn: 282635
Normally, if conversion would add implicit uses for redefined registers,
e.g. R0<def> = add_if ..., R0<imp-use>. However, if only subregisters of
R0 are known to be live but not R0 itself, such implicit uses will not be
added, causing prior definitions of such subregisters and R0 itself to
become dead.
llvm-svn: 282626
Also, remove unnecessary function attributes, parameters, and comments.
It looks like at least some of these tests are not minimal though...
llvm-svn: 282620
