code. It used to #include the enhanced disassembly
information for the targets it supported straight
out of lib/Target/{X86,ARM,...} but now it uses a
new interface provided by MCDisassembler, and (so
far) implemented by X86 and ARM.
Also removed hacky #define-controlled initialization
of targets in edis. If clients only want edis to
initialize a limited set of targets, they can set
--enable-targets on the configure command line.
llvm-svn: 101179
MachineBasicBlock::livein_iterator a const_iterator, because
clients shouldn't ever be using the iterator interface to
mutate the livein set.
llvm-svn: 101147
I also added a rule to the ARM target's Makefile to
build the ARM-specific instruction information table
for the enhanced disassembler.
I will add the test harness for all this stuff in
a separate commit.
llvm-svn: 100735
and use it in one place in inline asm handling stuff. Before
we'd generate this for an invalid modifier letter:
$ clang asm.c -c -o t.o
fatal error: error in backend: Invalid operand found in inline asm: 'abc incl ${0:Z}'
INLINEASM <es:abc incl ${0:Z}>, 10, %EAX<def>, 2147483657, %EAX, 14, %EFLAGS<earlyclobber,def,dead>, <!-1>
Now we generate this:
$ clang asm.c -c -o t.o
error: invalid operand in inline asm: 'incl ${0:Z}'
asm.c:3:12: note: generated from here
__asm__ ("incl %Z0" : "+r" (X));
^
1 error generated.
This is much better but still admittedly not great ("why" is the operand
invalid??), codegen should try harder with its diagnostics :)
llvm-svn: 100723
explicitly split into stride-and-offset pairs. Also, add the
ability to track multiple post-increment loops on the same expression.
This refines the concept of "normalizing" SCEV expressions used for
to post-increment uses, and introduces a dedicated utility routine for
normalizing and denormalizing expressions.
This fixes the expansion of expressions which are post-increment users
of more than one loop at a time. More broadly, this takes LSR another
step closer to being able to reason about more than one loop at a time.
llvm-svn: 100699
1. Introduce some enums and accessors in the InlineAsm class
that eliminate a ton of magic numbers when handling inline
asm SDNode.
2. Add a new MDNodeSDNode selection dag node type that holds
a MDNode (shocking!)
3. Add a new argument to ISD::INLINEASM nodes that hold !srcloc
metadata, propagating it to the instruction emitter, which
drops it.
No functionality change.
llvm-svn: 100605
Overflowing an unsigned integer is fine and behaves as you would expect.
Also fix a pasto, allowing SignExtend64 to take a 64-bit argument.
llvm-svn: 100517
ownership over the pointer it contains. Useful when we want to
communicate ownership while still having several clients holding on to
the same pointer *without* introducing reference counting.
llvm-svn: 100463
When a target instruction wants to set target-specific flags, it should simply
set bits in the TSFlags bit vector defined in the Instruction TableGen class.
This works well because TableGen resolves member references late:
class I : Instruction {
AddrMode AM = AddrModeNone;
let TSFlags{3-0} = AM.Value;
}
let AM = AddrMode4 in
def ADD : I;
TSFlags gets the expected bits from AddrMode4 in this example.
llvm-svn: 100384
"Print" methods to "Emit". Emit is something that goes
to an mc streamer, Print is something that goes to a
raw_ostream (for inline asm)
llvm-svn: 100337
"asm printering" happens through MCStreamer. This also
Streamerizes PIC16 debug info, which escaped my attention.
This removes a leak from LLVMTargetMachine of the 'legacy'
output stream.
llvm-svn: 100327
raw_ostream to print an instruction to had to be specified
at MCInstPrinter construction time instead of being able
to pick at each call to printInstruction.
llvm-svn: 100307
Added support for address spaces and added a isVolatile field to memcpy, memmove, and memset,
e.g., llvm.memcpy.i32(i8*, i8*, i32, i32) -> llvm.memcpy.p0i8.p0i8.i32(i8*, i8*, i32, i32, i1)
llvm-svn: 100304
EmitInlineAsm. However, this attempt is foiled by operands
being emitted directly to "O" so I'll have to do some surgery
and finish MCizing the world.
llvm-svn: 100291
(what was I thinking?) and there's also a problem with LCSSA. I'll try again
later with fixes.
--- Reverse-merging r100263 into '.':
U lib/Transforms/Utils/SSAUpdater.cpp
--- Reverse-merging r100177 into '.':
G lib/Transforms/Utils/SSAUpdater.cpp
--- Reverse-merging r100148 into '.':
G lib/Transforms/Utils/SSAUpdater.cpp
--- Reverse-merging r100147 into '.':
U include/llvm/Transforms/Utils/SSAUpdater.h
G lib/Transforms/Utils/SSAUpdater.cpp
--- Reverse-merging r100131 into '.':
G include/llvm/Transforms/Utils/SSAUpdater.h
G lib/Transforms/Utils/SSAUpdater.cpp
--- Reverse-merging r100130 into '.':
G lib/Transforms/Utils/SSAUpdater.cpp
--- Reverse-merging r100126 into '.':
G include/llvm/Transforms/Utils/SSAUpdater.h
G lib/Transforms/Utils/SSAUpdater.cpp
--- Reverse-merging r100050 into '.':
D test/Transforms/GVN/2010-03-31-RedundantPHIs.ll
--- Reverse-merging r100047 into '.':
G include/llvm/Transforms/Utils/SSAUpdater.h
G lib/Transforms/Utils/SSAUpdater.cpp
llvm-svn: 100264
having the bitcode writer materialize mdnodes for all the
debug location tuples when writing out the bc file and
stores the information in a more compact form. For example,
the -O0 -g bc file for combine.c in 176.gcc shrinks from
739392 to 512096 bytes.
This concludes my planned short-term debug info work.
llvm-svn: 100261
source addition. Apparently the buildbots were wrong about failures.
---
Add some switches helpful for debugging:
-print-before=<Pass Name>
Dump IR before running pass <Pass Name>.
-print-before-all
Dump IR before running each pass.
-print-after-all
Dump IR after running each pass.
These are helpful when tracking down a miscompilation. It is easy to
get IR dumps and do diffs on them, etc.
To make this work well, add a new getPrinterPass API to Pass so that
each kind of pass (ModulePass, FunctionPass, etc.) can create a Pass
suitable for dumping out the kind of object the Pass works on.
llvm-svn: 100249
backend (ARMDecoderEmitter) which emits the decoder functions for ARM and Thumb,
and the disassembler core which invokes the decoder function and builds up the
MCInst based on the decoded Opcode.
Reviewed by Chris Latter and Bob Wilson.
llvm-svn: 100233
representation. This eliminates the 'DILocation' MDNodes for
file/line/col tuples from -O0 -g codegen.
This remove the old DebugLoc class, making it a typedef for DebugLoc,
I'll rename NewDebugLoc next.
I didn't update the JIT to use the new apis, so it will continue to
work, but be as slow as before. Someone should eventually do this
or, better yet, rip out the JIT debug info stuff and build the JIT
on top of MC.
llvm-svn: 100209
<string> include. For some reason the buildbot choked on this while my
builds did not. It's probably due to a difference in system headers.
---
Add some switches helpful for debugging:
-print-before=<Pass Name>
Dump IR before running pass <Pass Name>.
-print-before-all
Dump IR before running each pass.
-print-after-all
Dump IR after running each pass.
These are helpful when tracking down a miscompilation. It is easy to
get IR dumps and do diffs on them, etc.
To make this work well, add a new getPrinterPass API to Pass so that
each kind of pass (ModulePass, FunctionPass, etc.) can create a Pass
suitable for dumping out the kind of object the Pass works on.
llvm-svn: 100204
Added support for address spaces and added a isVolatile field to memcpy, memmove, and memset,
e.g., llvm.memcpy.i32(i8*, i8*, i32, i32) -> llvm.memcpy.p0i8.p0i8.i32(i8*, i8*, i32, i32, i1)
llvm-svn: 100191
-print-before=<Pass Name>
Dump IR before running pass <Pass Name>.
-print-before-all
Dump IR before running each pass.
-print-after-all
Dump IR after running each pass.
These are helpful when tracking down a miscompilation. It is easy to
get IR dumps and do diffs on them, etc.
To make this work well, add a new getPrinterPass API to Pass so that
each kind of pass (ModulePass, FunctionPass, etc.) can create a Pass
suitable for dumping out the kind of object the Pass works on.
llvm-svn: 100143
is necessary. Inherits from new templated baseclass CallSiteBase<>
which is highly customizable. Base CallSite on it too, in a configuration
that allows full mutation.
Adapt some call sites in analyses to employ ImmutableCallSite.
llvm-svn: 100100
of raw mdnodes. This allows frontends to specify debug
locations without ever creating an MDNode for the DILocation.
This requires a corresponding clang/llvm-gcc change which
I'll try to commit as simultaneously as possible.
llvm-svn: 100095
1. Makes it possible to lower with floating point loads and stores.
2. Avoid unaligned loads / stores unless it's fast.
3. Fix some memcpy lowering logic bug related to when to optimize a
load from constant string into a constant.
4. Adjust x86 memcpy lowering threshold to make it more sane.
5. Fix x86 target hook so it uses vector and floating point memory
ops more effectively.
rdar://7774704
llvm-svn: 100090
being a TrackingVH<MDNode> to a NewDebugLoc, shrinking
sizeof(Instruction) a lot, and providing clients the ability
to deal with locations in terms of NewDebugLoc instead of
having to deal with Metadata. This is still fully compatible
with all clients that *do* use MDNodes for everything of
course.
No functionality change.
llvm-svn: 100088
aes instead of sse4.2. Add a brief todo for a subtarget flag and rework
the aeskeygenassist instruction to more closely match the docs.
llvm-svn: 100078
and will replace the 'DbgInfo' member in Instruction.
The benefit of NewDebugLoc is that it is compact (8 bytes vs 12/24
bytes for the DbgInfo member in Instruction on a 32/64 bit system),
it means that we will end up not having to allocate MDNodes to
represent the "DILocations" in common cases of -O0 -g, and it is
much more efficient to get things out of than the MDNode.
llvm-svn: 100072
PHIs. The previous algorithm was unable to reliably detect when existing
PHIs in a cycle can be reused. I'm still working on reducing a testcase.
Radar 7711900.
llvm-svn: 100047
instructions. In addition to being a convenience,
they are faster than the old apis, particularly when
not going from an MDKindID like people should be
doing.
llvm-svn: 99982
the storage of !dbg metadata kinds in the instruction themselves.
The on-the-side hash table works great for metadata that not-all
instructions get, or for metadata that only exists when optimizing.
But when compile-time is everything, it isn't great.
I'm not super thrilled with the fact that this plops a TrackingVH in
Instruction, because it grows it by 3 words. I'm investigating
alternatives, but this should be a step in the right direction in any
case.
llvm-svn: 99957
e.g., llvm.memcpy.i32(i8*, i8*, i32, i32) -> llvm.memcpy.p0i8.p0i8.i32(i8*, i8*, i32, i32, i1)
A update of langref will occur in a subsequent checkin.
llvm-svn: 99928
create symbols. It is extremely error prone and a source of a lot
of the remaining integrated assembler bugs on x86-64.
This fixes rdar://7807601.
llvm-svn: 99902
on all objects it has allocated, if they are all of the same size and alignment.
Use this to destruct all VNInfos allocated in LiveIntervalAnalysis (PR6653).
valnos is not reliable for this purpose, as seen in r99400
(which still leaked, and sometimes caused double frees).
llvm-svn: 99881
instead of just a count of them, and refactor the guts of
report printing out of removeTimer into its own method.
Refactor addTimerToPrint away.
llvm-svn: 99872
eliminate the per-timer lock (timers should be
externally locked if needed), the info-output-stream
can never be dbgs(), so drop the check. Make some
stuff private.
llvm-svn: 99839
makes calls a little bit more consistent and allows easy removal of the
specializations in the future. Convert all callers to the templated functions.
llvm-svn: 99838
SELinux doesn't allow 'execmem', returning MAP_FAILED and 'Permission denied'
for mmap or RWX memory. In this case AllocateRWX was returning a MemoryBlock
with uninitialized fields, which sometimes caused crashes.
This patch initializes MemoryBlock fields to 0, so that the RWX-failure check
works.
It doesn't fix the SELinux 'execmem' issues though (the JIT will not work when
SELinux is in enforcing mode).
llvm-svn: 99762
and those derived from them. These are obnoxious because
they were written as: PatLeaf<(bitconvert). Not having an
argument was foiling adding better type checking for operand
count matching up with what was required (in this case,
bitconvert always requires an operand!)
llvm-svn: 99759
- Still O(N^2), just a faster form, and now its the MCAsmLayout's fault.
On the .s I am tuning against (combine.s from 403.gcc):
--
ddunbar@lordcrumb:MC$ diff stats-before.txt stats-after.txt
5,10c5,10
< 1728 assembler - Number of assembler layout and relaxation steps
< 7707 assembler - Number of emitted assembler fragments
< 120588 assembler - Number of emitted object file bytes
< 2233448 assembler - Number of evaluated fixups
< 1727 assembler - Number of relaxed instructions
< 6723845 mcexpr - Number of MCExpr evaluations
---
> 3 assembler - Number of assembler layout and relaxation steps
> 7707 assembler - Number of emitted assembler fragments
> 120588 assembler - Number of emitted object file bytes
> 14796 assembler - Number of evaluated fixups
> 1727 assembler - Number of relaxed instructions
> 67889 mcexpr - Number of MCExpr evaluations
--
Feel free to LOL at the -before numbers, if you like.
I am a little surprised we make more than 2 relaxation passes. It's pretty
trivial for us to do relaxation out-of-order if that would give a speedup.
llvm-svn: 99543
Here is a theoretical example that illustrates why the placement is important.
tmp1 =
store tmp1 -> x
...
tmp2 = add ...
...
call
...
store tmp2 -> x
Now mem2reg comes along:
tmp1 =
dbg_value (tmp1 -> x)
...
tmp2 = add ...
...
call
...
dbg_value (tmp2 -> x)
When the debugger examine the value of x after the add instruction but before the call, it should have the value of tmp1.
Furthermore, for dbg_value's that reference constants, they should not be emitted at the beginning of the block (since they do not have "producers").
This patch also cleans up how SDISel manages DbgValue nodes. It allow a SDNode to be referenced by multiple SDDbgValue nodes. When a SDNode is deleted, it uses the information to find the SDDbgValues and invalidate them. They are not deleted until the corresponding SelectionDAG is destroyed.
llvm-svn: 99469
--- Reverse-merging r99440 into '.':
U test/MC/AsmParser/X86/x86_32-bit_cat.s
U test/MC/AsmParser/X86/x86_32-encoding.s
U include/llvm/IntrinsicsX86.td
U include/llvm/CodeGen/SelectionDAGNodes.h
U lib/Target/X86/X86InstrSSE.td
U lib/Target/X86/X86ISelLowering.h
llvm-svn: 99450
