The IEEE-754 Standard makes it clear that fneg(x) and
fsub(-0.0, x) are two different operations. The former is a bitwise
operation, while the latter is an arithmetic operation. This patch
creates a dedicated FNeg IR Instruction to model that behavior.
Differential Revision: https://reviews.llvm.org/D53877
llvm-svn: 346774
This patch allows internalising globals if all accesses to them
(from live functions) are from non-volatile load instructions
Differential revision: https://reviews.llvm.org/D49362
llvm-svn: 346584
Summary:
The NotEligibleToImport flag on the GlobalValueSummary was set if it
isn't legal to import (e.g. because it references unpromotable locals)
and when it can't be inlined (in which case importing is pointless).
I split out the inlinable piece into a separate flag on the
FunctionSummary (doesn't make sense for aliases or global variables),
because in the future we may want to import for reasons other than
inlining.
Reviewers: davidxl
Subscribers: mehdi_amini, inglorion, eraman, steven_wu, dexonsmith, arphaman, llvm-commits
Differential Revision: https://reviews.llvm.org/D53345
llvm-svn: 346261
Summary:
This is a revised version of D41474.
When the debug location is parsed in BitcodeReader::parseFunction, the
scope and inlinedAt MDNodes are obtained via MDLoader->getMDNodeFwdRefOrNull(),
which will create a forward ref if they were not yet loaded.
Specifically, if one of these MDNodes is in the module level metadata
block, and this is during ThinLTO importing, that metadata block is
lazily loaded.
Most places in that invoke getMDNodeFwdRefOrNull have a corresponding call
to resolveForwardRefsAndPlaceholders which will take care of resolving them.
E.g. places that call getMetadataFwdRefOrLoad, or at the end of parsing a
function-level metadata block, or at the end of the initial lazy load of
module level metadata in order to handle invocations of getMDNodeFwdRefOrNull
for named metadata and global object attachments. However, the calls for
the scope/inlinedAt of debug locations are not backed by any such call to
resolveForwardRefsAndPlaceholders.
To fix this, change the scope and inlinedAt parsing to instead use
getMetadataFwdRefOrLoad, which will ensure the forward refs to lazily
loaded metadata are resolved.
Fixes PR35472.
Reviewers: dexonsmith, Sunil_Srivastava, vsk
Subscribers: inglorion, eraman, steven_wu, sebpop, mehdi_amini, dmikulin, vsk, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D53596
llvm-svn: 345095
Summary:
Some lines have a hit counter where they should not have one.
For example, in C++, some cleanup is adding at the end of a scope represented by a '}'.
So such a line has a hit counter where a user expects to not have one.
The goal of the patch is to add this information in DILocation which is used to get the covered lines in GCOVProfiling.cpp.
A following patch in clang will add this information when generating IR (https://reviews.llvm.org/D49916).
Reviewers: marco-c, davidxl, vsk, javed.absar, rnk
Reviewed By: rnk
Subscribers: eraman, xur, danielcdh, aprantl, rnk, dblaikie, #debug-info, vsk, llvm-commits, sylvestre.ledru
Tags: #debug-info
Differential Revision: https://reviews.llvm.org/D49915
llvm-svn: 342631
Load Hardening.
Wires up the existing pass to work with a proper IR attribute rather
than just a hidden/internal flag. The internal flag continues to work
for now, but I'll likely remove it soon.
Most of the churn here is adding the IR attribute. I talked about this
Kristof Beyls and he seemed at least initially OK with this direction.
The idea of using a full attribute here is that we *do* expect at least
some forms of this for other architectures. There isn't anything
*inherently* x86-specific about this technique, just that we only have
an implementation for x86 at the moment.
While we could potentially expose this as a Clang-level attribute as
well, that seems like a good question to defer for the moment as it
isn't 100% clear whether that or some other programmer interface (or
both?) would be best. We'll defer the programmer interface side of this
for now, but at least get to the point where the feature can be enabled
without relying on implementation details.
This also allows us to do something that was really hard before: we can
enable *just* the indirect call retpolines when using SLH. For x86, we
don't have any other way to mitigate indirect calls. Other architectures
may take a different approach of course, and none of this is surfaced to
user-level flags.
Differential Revision: https://reviews.llvm.org/D51157
llvm-svn: 341363
This is a bit awkward in a handful of places where we didn't even have
an instruction and now we have to see if we can build one. But on the
whole, this seems like a win and at worst a reasonable cost for removing
`TerminatorInst`.
All of this is part of the removal of `TerminatorInst` from the
`Instruction` type hierarchy.
llvm-svn: 340701
Most users won't have to worry about this as all of the
'getOrInsertFunction' functions on Module will default to the program
address space.
An overload has been added to Function::Create to abstract away the
details for most callers.
This is based on https://reviews.llvm.org/D37054 but without the changes to
make passing a Module to Function::Create() mandatory. I have also added
some more tests and fixed the LLParser to accept call instructions for
types in the program address space.
Reviewed By: bjope
Differential Revision: https://reviews.llvm.org/D47541
llvm-svn: 340519
Summary:
To allow bitcode built by old compiler to pass the current verifer,
BitcodeReader needs to auto infer the correct runtime preemption from
linkage and visibility for GlobalValues.
Since llvm-6.0 bitcode already contains the new field but can be
incorrect in some cases, the attribute needs to be recomputed all the
time in BitcodeReader. This will make all the GVs has dso_local marked
correctly if read from bitcode, and it should still allow the verifier
to catch mistakes in optimization passes.
This should fix PR38009.
Reviewers: sfertile, vsk
Reviewed By: vsk
Subscribers: dexonsmith, llvm-commits
Differential Revision: https://reviews.llvm.org/D49039
llvm-svn: 336560
Summary:
Adds a string saver to the ModuleSummaryIndex so it can store value
names in the case of adding a ValueInfo for a GUID when we don't
have the name stored in a Module string table. This is motivated
by the upcoming summary parser patch, where we will read value names
from the summary entry and want to store them, even when a Module
is not available.
Currently this allows us to store the name in the legacy bitcode case,
and I have added a test to show that.
Reviewers: pcc, dexonsmith
Subscribers: mehdi_amini, inglorion, eraman, steven_wu, llvm-commits
Differential Revision: https://reviews.llvm.org/D47842
llvm-svn: 335570
Summary:
Without this change we only add module paths to the combined index when
there is a module hash or at least one global value. Make this more
consistent by adding the module to the index whenever there is a summary
section, and it is a per-module summary (had a MODULE_CODE_SOURCE_FILENAME
record).
Since we will no longer add module paths lazily, add a new interface to get
the module info from the index that asserts it is already added.
Fixes PR37899.
Reviewers: Vlad, pcc
Subscribers: mehdi_amini, inglorion, steven_wu, llvm-commits
Differential Revision: https://reviews.llvm.org/D48511
llvm-svn: 335567
With the upcoming patch to add summary parsing support, IsAnalysis would
be true in contexts where we are not performing module summary analysis.
Rename to the more specific and approprate HaveGVs, which is essentially
what this flag is indicating.
llvm-svn: 334140
We've been running doxygen with the autobrief option for a couple of
years now. This makes the \brief markers into our comments
redundant. Since they are a visual distraction and we don't want to
encourage more \brief markers in new code either, this patch removes
them all.
Patch produced by
for i in $(git grep -l '\\brief'); do perl -pi -e 's/\\brief //g' $i & done
Differential Revision: https://reviews.llvm.org/D46290
llvm-svn: 331272
See r331124 for how I made a list of files missing the include.
I then ran this Python script:
for f in open('filelist.txt'):
f = f.strip()
fl = open(f).readlines()
found = False
for i in xrange(len(fl)):
p = '#include "llvm/'
if not fl[i].startswith(p):
continue
if fl[i][len(p):] > 'Config':
fl.insert(i, '#include "llvm/Config/llvm-config.h"\n')
found = True
break
if not found:
print 'not found', f
else:
open(f, 'w').write(''.join(fl))
and then looked through everything with `svn diff | diffstat -l | xargs -n 1000 gvim -p`
and tried to fix include ordering and whatnot.
No intended behavior change.
llvm-svn: 331184
Summary:
Introduce the ShadowCallStack function attribute. It's added to
functions compiled with -fsanitize=shadow-call-stack in order to mark
functions to be instrumented by a ShadowCallStack pass to be submitted
in a separate change.
Reviewers: pcc, kcc, kubamracek
Reviewed By: pcc, kcc
Subscribers: cryptoad, mehdi_amini, javed.absar, llvm-commits, kcc
Differential Revision: https://reviews.llvm.org/D44800
llvm-svn: 329108
Summary:
When building with libFuzzer, converting control flow to selects or
obscuring the original operands of CMPs reduces the effectiveness of
libFuzzer's heuristics.
This patch provides an attribute to disable or modify certain optimizations
for optimal fuzzing signal.
Provides a less aggressive alternative to https://reviews.llvm.org/D44057.
Reviewers: vitalybuka, davide, arsenm, hfinkel
Reviewed By: vitalybuka
Subscribers: junbuml, mehdi_amini, wdng, javed.absar, hiraditya, llvm-commits, kcc
Differential Revision: https://reviews.llvm.org/D44232
llvm-svn: 328214
X86 Supports Indirect Branch Tracking (IBT) as part of Control-Flow Enforcement Technology (CET).
IBT instruments ENDBR instructions used to specify valid targets of indirect call / jmp.
The `nocf_check` attribute has two roles in the context of X86 IBT technology:
1. Appertains to a function - do not add ENDBR instruction at the beginning of the function.
2. Appertains to a function pointer - do not track the target function of this pointer by adding nocf_check prefix to the indirect-call instruction.
This patch implements `nocf_check` context for Indirect Branch Tracking.
It also auto generates `nocf_check` prefixes before indirect branchs to jump tables that are guarded by range checks.
Differential Revision: https://reviews.llvm.org/D41879
llvm-svn: 327767
Summary: The discussion and as per need, each vendor needs a way to keep the old fast flags and the new fast flags in the auto upgrade path of the IR upgrader. This revision addresses that issue.
Patched by Michael Berg
Reviewers: qcolombet, hans, steven_wu
Reviewed By: qcolombet, steven_wu
Subscribers: dexonsmith, vsk, mehdi_amini, andrewrk, MatzeB, wristow, spatel
Differential Revision: https://reviews.llvm.org/D43253
llvm-svn: 325525
Summary:
Gold plugin does not add pass to ThinLTO modules without useful symbols.
In this case ThinLTO can't create corresponding index file and some features, like CFI,
cannot be processes by backed correctly without index.
Given that we don't need the backed output we can request it to avoid
processing the module. This is implemented by this patch using new
"SkipModuleByDistributedBackend" flag.
Reviewers: pcc, tejohnson
Subscribers: mehdi_amini, inglorion, eraman, cfe-commits
Differential Revision: https://reviews.llvm.org/D42995
llvm-svn: 325411
Summary:
TypeID summaries are used by CFI and need to be serialized by ThinLTO
indexing for later use by LTO Backend.
Reviewers: tejohnson, pcc
Subscribers: mehdi_amini, inglorion, eraman, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D42611
llvm-svn: 325182
Summary:
A recent fix to drop dead symbols (r323633) did not work for ThinLTO
distributed backends because we lose the WithGlobalValueDeadStripping
set on the index during the thin link. This patch adds a new flags
record to the bitcode format for the index, and serializes this flag
for the combined index (it would always be 0 for the per-module index
generated by the compile step, so no need to serialize the new flags
record there until/unless we add another flag that applies to the
per-module indexes).
Generally this flag should always be set for the distributed backends,
which are necessarily performed after the thin link. However, if we were
to simply set this flag on the index applied to the distributed backends
(invoked via clang), we would lose the ability to disable dead stripping
via -compute-dead=false for debugging purposes.
Reviewers: grimar, pcc
Subscribers: mehdi_amini, inglorion, eraman, llvm-commits
Differential Revision: https://reviews.llvm.org/D42799
llvm-svn: 324444
It was reverted after buildbot regressions.
Original commit message:
This allows relative block frequency of call edges to be passed
to the thinlink stage where it will be used to compute synthetic
entry counts of functions.
llvm-svn: 323460
Summary:
This allows relative block frequency of call edges to be passed to the
thinlink stage where it will be used to compute synthetic entry counts
of functions.
Reviewers: tejohnson, pcc
Subscribers: mehdi_amini, llvm-commits, inglorion
Differential Revision: https://reviews.llvm.org/D42212
llvm-svn: 323349
It was never fully disallowed. We were rejecting it in the asm parser,
but not in the verifier.
Currently TargetMachine::shouldAssumeDSOLocal returns true for hidden
ifuncs. I considered changing it and moving the check from the asm
parser to the verifier.
The reason for deciding to allow it instead is that all linkers handle
a direct reference just fine. They use the plt address as the address
of the function. In fact doing that means that clang doesn't have the
same bug as gcc: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=83782.
This patch then removes the check from the asm parser and updates the
bitcode reader and writer.
llvm-svn: 322378
Summary:
This implements a missing feature to allow importing of aliases, which
was previously disabled because alias cannot be available_externally.
We instead import an alias as a copy of its aliasee.
Some additional work was required in the IndexBitcodeWriter for the
distributed build case, to ensure that the aliasee has a value id
in the distributed index file (i.e. even when it is not being
imported directly).
This is a performance win in codes that have many aliases, e.g. C++
applications that have many constructor and destructor aliases.
Reviewers: pcc
Subscribers: mehdi_amini, inglorion, eraman, llvm-commits
Differential Revision: https://reviews.llvm.org/D40747
llvm-svn: 320895
Summary:
This is LLVM instrumentation for the new HWASan tool. It is basically
a stripped down copy of ASan at this point, w/o stack or global
support. Instrumenation adds a global constructor + runtime callbacks
for every load and store.
HWASan comes with its own IR attribute.
A brief design document can be found in
clang/docs/HardwareAssistedAddressSanitizerDesign.rst (submitted earlier).
Reviewers: kcc, pcc, alekseyshl
Subscribers: srhines, mehdi_amini, mgorny, javed.absar, eraman, llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D40932
llvm-svn: 320217
For now at least. We clearly need some kind of comdat or
linkonce_odr support for wasm but currently COMDAT is not
supported.
Disable COMDAT support in the same way we do the Mach-O. This
also causes clang not to generated COMDATs.
Differential Revision: https://reviews.llvm.org/D39873
llvm-svn: 318123
As discussed on llvm-dev:
http://lists.llvm.org/pipermail/llvm-dev/2016-November/107104.html
and again more recently:
http://lists.llvm.org/pipermail/llvm-dev/2017-October/118118.html
...this is a step in cleaning up our fast-math-flags implementation in IR to better match
the capabilities of both clang's user-visible flags and the backend's flags for SDNode.
As proposed in the above threads, we're replacing the 'UnsafeAlgebra' bit (which had the
'umbrella' meaning that all flags are set) with a new bit that only applies to algebraic
reassociation - 'AllowReassoc'.
We're also adding a bit to allow approximations for library functions called 'ApproxFunc'
(this was initially proposed as 'libm' or similar).
...and we're out of bits. 7 bits ought to be enough for anyone, right? :) FWIW, I did
look at getting this out of SubclassOptionalData via SubclassData (spacious 16-bits),
but that's apparently already used for other purposes. Also, I don't think we can just
add a field to FPMathOperator because Operator is not intended to be instantiated.
We'll defer movement of FMF to another day.
We keep the 'fast' keyword. I thought about removing that, but seeing IR like this:
%f.fast = fadd reassoc nnan ninf nsz arcp contract afn float %op1, %op2
...made me think we want to keep the shortcut synonym.
Finally, this change is binary incompatible with existing IR as seen in the
compatibility tests. This statement:
"Newer releases can ignore features from older releases, but they cannot miscompile
them. For example, if nsw is ever replaced with something else, dropping it would be
a valid way to upgrade the IR."
( http://llvm.org/docs/DeveloperPolicy.html#ir-backwards-compatibility )
...provides the flexibility we want to make this change without requiring a new IR
version. Ie, we're not loosening the FP strictness of existing IR. At worst, we will
fail to optimize some previously 'fast' code because it's no longer recognized as
'fast'. This should get fixed as we audit/squash all of the uses of 'isFast()'.
Note: an inter-dependent clang commit to use the new API name should closely follow
commit.
Differential Revision: https://reviews.llvm.org/D39304
llvm-svn: 317488
Now that we have a way to mark GlobalValues as local we can use the symbol
resolutions that the linker plugin provides as part of lto/thinlto link
step to refine the compilers view on what symbols will end up being local.
Originally commited as r317374, but reverted in r317395 to update some missed
tests.
Differential Revision: https://reviews.llvm.org/D35702
llvm-svn: 317408
Now that we have a way to mark GlobalValues as local we can use the symbol
resolutions that the linker plugin provides as part of lto/thinlto link
step to refine the compilers view on what symbols will end up being local.
Differential Revision: https://reviews.llvm.org/D35702
llvm-svn: 317374
Currently we do not represent runtime preemption in the IR, which has several
drawbacks:
1) The semantics of GlobalValues differ depending on the object file format
you are targeting (as well as the relocation-model and -fPIE value).
2) We have no way of disabling inlining of run time interposable functions,
since in the IR we only know if a function is link-time interposable.
Because of this llvm cannot support elf-interposition semantics.
3) In LTO builds of executables we will have extra knowledge that a symbol
resolved to a local definition and can't be preemptable, but have no way to
propagate that knowledge through the compiler.
This patch adds preemptability specifiers to the IR with the following meaning:
dso_local --> means the compiler may assume the symbol will resolve to a
definition within the current linkage unit and the symbol may be accessed
directly even if the definition is not within this compilation unit.
dso_preemptable --> means that the compiler must assume the GlobalValue may be
replaced with a definition from outside the current linkage unit at runtime.
To ease transitioning dso_preemptable is treated as a 'default' in that
low-level codegen will still do the same checks it did previously to see if a
symbol should be accessed indirectly. Eventually when IR producers emit the
specifiers on all Globalvalues we can change dso_preemptable to mean 'always
access indirectly', and remove the current logic.
Differential Revision: https://reviews.llvm.org/D20217
llvm-svn: 316668
The bitcode reader looks specifically for `__DATA, __objc_catlist` as a
section name. However, SVN r304661 removed the spaces (the two names
are functionally equivalent but do not compare equally
lexicographically). This causes compatibility issues. Add an
auto-upgrade path for removing the spaces as well as use the new name in
the LTO plugin.
llvm-svn: 315086
Summary: References should only be on the aliasee.
Reviewers: pcc
Subscribers: llvm-commits, inglorion
Differential Revision: https://reviews.llvm.org/D37814
llvm-svn: 313158
Adds function attributes to index: ReadNone, ReadOnly, NoRecurse, NoAlias. This attributes will be used for future ThinLTO optimizations that will propagate function attributes across modules.
llvm-svn: 310061
OpenCL 2.0 introduces the notion of memory scopes in atomic operations to
global and local memory. These scopes restrict how synchronization is
achieved, which can result in improved performance.
This change extends existing notion of synchronization scopes in LLVM to
support arbitrary scopes expressed as target-specific strings, in addition to
the already defined scopes (single thread, system).
The LLVM IR and MIR syntax for expressing synchronization scopes has changed
to use *syncscope("<scope>")*, where <scope> can be "singlethread" (this
replaces *singlethread* keyword), or a target-specific name. As before, if
the scope is not specified, it defaults to CrossThread/System scope.
Implementation details:
- Mapping from synchronization scope name/string to synchronization scope id
is stored in LLVM context;
- CrossThread/System and SingleThread scopes are pre-defined to efficiently
check for known scopes without comparing strings;
- Synchronization scope names are stored in SYNC_SCOPE_NAMES_BLOCK in
the bitcode.
Differential Revision: https://reviews.llvm.org/D21723
llvm-svn: 307722
If a regular LTO module has a summary index, then instead of linking
it into the combined regular LTO module right away, add it to the
combined summary index and associate it with a special module that
represents the combined regular LTO module.
Any such modules are linked during LTO::run(), at which time we use
the results of summary-based dead stripping to control whether to
link prevailing symbols.
Differential Revision: https://reviews.llvm.org/D33922
llvm-svn: 305482
