We only implemented it for one of the 3 HLE instructions and that instruction is also under the RTM flag. Clang only implements the RTM flag from its command line.
llvm-svn: 294562
This patch does the following.
1. Adds an Intrinsic int_x86_clzero which works with __builtin_ia32_clzero
2. Identifies clzero feature using cpuid info. (Function:8000_0008, Checks if EBX[0]=1)
3. Adds the clzero feature under znver1 architecture.
4. The custom inserter is added in Lowering.
5. A testcase is added to check the intrinsic.
6. The clzero instruction is added to assembler test.
Patch by Ganesh Gopalasubramanian with a couple formatting tweaks, a disassembler test, and using update_llc_test.py from me.
Differential revision: https://reviews.llvm.org/D29385
llvm-svn: 294558
Summary:
This patch enables the following
1. AMD family 17h architecture using "znver1" tune flag (-march, -mcpu).
2. ISAs that are enabled for "znver1" architecture.
3. Checks ADX isa from cpuid to identify "znver1" flag when -march=native is used.
4. ISAs FMA4, XOP are disabled as they are dropped from amdfam17.
5. For the time being, it uses the btver2 scheduler model.
6. Test file is updated to check this flag.
This item is linked to clang review item https://reviews.llvm.org/D28018
Patch by Ganesh Gopalasubramanian
Reviewers: RKSimon, craig.topper
Subscribers: vprasad, RKSimon, ashutosh.nema, llvm-commits
Differential Revision: https://reviews.llvm.org/D28017
llvm-svn: 291543
Summary:
Intel's i5-6300U CPU is reporting to have a model id of 78 (4e).
The Host detection assumes that to be Skylake Xeon (with AVX512 support),
instead of a normal Skylake machine.
Patch by: Valentin Churavy
Reviewers: nalimilan, craig.topper
Subscribers: hfinkel, tkelman, craig.topper, nalimilan, llvm-commits
Differential Revision: https://reviews.llvm.org/D28221
llvm-svn: 291084
This CPU type was not previously recognized by LLVM which led to emitting
poor (and sometimes incorrect) code in some JIT workloads on such a machine.
llvm-svn: 290961
Summary:
For now I have only added support for x86_64 Linux, but other systems
can be added incrementally.
This is to be used for setting the default parallelism for ThinLTO
backends (instead of thread::hardware_concurrency which includes
hyperthreading and is too aggressive). I'll send this as a follow-on
patch, and it will fall back to hardware_concurrency when the new
getHostNumPhysicalCores returns -1 (when not supported for a given
host system).
I also added an interface to MemoryBuffer to force reading a file
as a stream - this is required for /proc/cpuinfo which is a special
file that looks like a normal file but appears to have 0 size.
The existing readers of this file in Host.cpp are reading the first
1024 or so bytes from it, because the necessary info is near the top.
But for the new functionality we need to be able to read the entire
file. I can go back and change the other readers to use the new
getFileAsStream as a follow-on patch since it seems much more robust.
Added a unittest.
Reviewers: mehdi_amini
Subscribers: beanz, mgorny, llvm-commits, modocache
Differential Revision: https://reviews.llvm.org/D25564
llvm-svn: 284138
Summary:
Attempting to fix PR30384.
Take the same approach as in compiler_rt and add a simplified version of __get_cpuid_max.
Including cpuid.h is no longer needed.
Reviewers: echristo, joerg
Subscribers: mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D24597
llvm-svn: 283265
Summary:
Mirroring most cleanup changed from compiler-rt/lib/builtins/cpu_model.
x86 methods are still returning a bool.
Reviewers: llvm-commits, echristo, craig.topper, sanjoy
Subscribers: mehdi_amini
Differential Revision: https://reviews.llvm.org/D22480
llvm-svn: 276149
[cpu-detection] [amdfam10] Return barcelona, and amdfam10 for all other
subtypes. Address Bug 28067.
Along with the refactoring of Host.cpp, getHostCPUName() was modified to
return more precise types for CPUs in amdfam10.
However, callers of getHostCPUName() do string matching on type, so this
cannot be modified.
Currently there is support in the x86 backend for barcelona.
For all other subtypes the assumed return value is amdfam10.
Fix: getHostCPUName() returns barcelona subtype and amdfam10 for all
others. This can be extended further when support for the other subtypes
is added.
Differential revision: http://reviews.llvm.org/D21193
llvm-svn: 272333
Summary: Remove architecture subtype from the string returned by getHostCPUName(). String matching done on type.
Reviewers: llvm-commits, echristo
Subscribers: mehdi_amini
Differential Revision: http://reviews.llvm.org/D21193
llvm-svn: 272328
Summary:
Break on all switch cases for outer and inner switches.
No functionality changed.
Reviewers: llvm-commits, sanjoy
Differential Revision: http://reviews.llvm.org/D21158
llvm-svn: 272228
Summary:
Following D20970 (committed as r271726).
This is a substantial refactoring of the host CPU detection code.
There is no functionality change intended, but the changes are extensive.
Definitions of architecture types and subtypes are by no means exhaustive or
perfectly defined, but a fair starting point.
Suggestions for futher improvements are welcome.
Reviewers: llvm-commits
Differential Revision: http://reviews.llvm.org/D20988
llvm-svn: 271921
Summary:
Follow-up to D20926 (committed as r271595, r271596).
This patch is in preparation for a substantial refactoring of the code.
No functionality changed.
Differential Revision: http://reviews.llvm.org/D20970
llvm-svn: 271726
code. To make the diffs easier to read, clang-format everything first.
No functionality changed.
Patch by Alina Sbirlea!
http://reviews.llvm.org/D20926
llvm-svn: 271595
Summary:
MONITORX/MWAITX instructions provide similar capability to the MONITOR/MWAIT
pair while adding a timer function, such that another termination of the MWAITX
instruction occurs when the timer expires. The presence of the MONITORX and
MWAITX instructions is indicated by CPUID 8000_0001, ECX, bit 29.
The MONITORX and MWAITX instructions are intercepted by the same bits that
intercept MONITOR and MWAIT. MONITORX instruction establishes a range to be
monitored. MWAITX instruction causes the processor to stop instruction execution
and enter an implementation-dependent optimized state until occurrence of a
class of events.
Opcode of MONITORX instruction is "0F 01 FA". Opcode of MWAITX instruction is
"0F 01 FB". These opcode information is used in adding tests for the
disassembler.
These instructions are enabled for AMD's bdver4 architecture.
Patch by Ganesh Gopalasubramanian!
Reviewers: echristo, craig.topper, RKSimon
Subscribers: RKSimon, joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D19795
llvm-svn: 269911
This patch corresponds to review:
http://reviews.llvm.org/D19683
Simply adds the bits for being able to specify -mcpu=pwr9 to the back end.
llvm-svn: 268950
Some Include What You Use suggestions were used too.
Use anonymous namespaces in source files.
Differential revision: http://reviews.llvm.org/D18778
llvm-svn: 265454
Summary:
- Rename `"skylake"` == SkylakeServerProc to `"skylake-avx512"`
- Change `"skylake"` to denote SkylakeClientProc
- Fix the detection of cpu family 6 and model 94 to be
SkylakeClientProc instead of SkylakeServerProc
- Remove the `"cnl"` for CannonLake
Reviewers: craig.topper, delena
Subscribers: zansari, echristo, qcolombet, RKSimon, spatel, DavidKreitzer, mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D17090
llvm-svn: 261482
Changes in X86.td:
I set features of Intel processors in incremental form: IVB = SNB + X HSW = IVB + X ..
I added Skylake client processor and defined it's features
FeatureADX was missing on KNL
Added some new features to appropriate processors SMAP, IFMA, PREFETCHWT1, VMFUNC and others
Differential Revision: http://reviews.llvm.org/D16357
llvm-svn: 258659
The feature flag is for VPERMB,VPERMI2B,VPERMT2B and VPMULTISHIFTQB instructions.
More about the instruction can be found in:
hattps://software.intel.com/sites/default/files/managed/07/b7/319433-023.pdf
Differential Revision: http://reviews.llvm.org/D16190
llvm-svn: 258012
the feature flag is essential for RDPKRU and WRPKRU instruction
more about the instruction can be found in the SDM rev 56, vol 2 from http://www.intel.com/sdm
Differential Revision: http://reviews.llvm.org/D15491
llvm-svn: 255644
This patch adds support for the z13 processor type and its vector facility,
and adds MC support for all new instructions provided by that facilily.
Apart from defining the new instructions, the main changes are:
- Adding VR128, VR64 and VR32 register classes.
- Making FP64 a subclass of VR64 and FP32 a subclass of VR32.
- Adding a D(V,B) addressing mode for scatter/gather operations
- Adding 1-, 2-, and 3-bit immediate operands for some 4-bit fields.
Until now all immediate operands have been the same width as the
underlying field (hence the assert->return change in decode[SU]ImmOperand).
In addition, sys::getHostCPUName is extended to detect running natively
on a z13 machine.
Based on a patch by Richard Sandiford.
llvm-svn: 236520
