Commit Graph

156 Commits

Author SHA1 Message Date
Chris Lattner
896b393fab set SDNPVariadic on nodes throughout the rest of the targets that
need them.

llvm-svn: 98937
2010-03-19 05:33:51 +00:00
Bob Wilson
279818d473 Remove the writeback flag from ARM's address mode 4. Now that we have separate
instructions for ld/st with writeback, the flag is completely redundant.

llvm-svn: 98643
2010-03-16 17:46:45 +00:00
Bob Wilson
0e8a3d7a13 Change ARM ld/st multiple instructions to have variant instructions for
writebacks to the address register.  This gets rid of the hack that the
first register on the list was the magic writeback register operand.  There
was an implicit constraint that if that operand was not reg0 it had to match
the base register operand.  The post-RA scheduler's antidependency breaker
did not understand that constraint and sometimes changed one without the
other.  This also fixes Radar 7495976 and should help the verifier work
better for ARM code.

There are now new ld/st instructions explicit writeback operands and explicit
constraints that tie those registers together.

llvm-svn: 98409
2010-03-13 01:08:20 +00:00
Johnny Chen
db62f78f10 Factored out the disassembly printing of CPS option, MSR mask, and Negative Zero
operands into their own PrintMethod, in order not to pollute the printOperand()
impl with disassembly only Imm modifiers.

llvm-svn: 98172
2010-03-10 18:59:38 +00:00
Johnny Chen
c903faa636 Modified the asm string of 16-bit Thumb MUL instruction so that it prints:
MULS <Rdm>, <Rn>, <Rdm>

according to A8.6.105 MUL Encoding T1.

llvm-svn: 97675
2010-03-03 23:15:43 +00:00
Johnny Chen
88f05c26a5 Added 32-bit Thumb instructions: CPS, SDIV, UDIV, SXTB16, SXTAB16, UXTAB16, SEL,
SMMULR, SMMLAR, SMMLSR, TBB, TBH, and 16-bit Thumb instruction CPS for
disassembly only.

llvm-svn: 97573
2010-03-02 18:14:57 +00:00
Dan Gohman
99c6bcbc13 The mayHaveSideEffects flag is no longer used.
llvm-svn: 97348
2010-02-27 23:47:46 +00:00
Johnny Chen
30a910f458 Added the following 16-bit Thumb instructions for disassembly only: YIELD, WFE,
WFI, SEV, SETEND.

llvm-svn: 97149
2010-02-25 17:51:03 +00:00
Johnny Chen
bbe3592817 Added tNOP for disassembly only.
llvm-svn: 97105
2010-02-25 03:28:51 +00:00
Johnny Chen
13b9bd479f Added tSVC and tTRAP for disassembly only.
llvm-svn: 97098
2010-02-25 02:21:11 +00:00
Jim Grosbach
c4ab116a90 Updated version of r96634 (which was reverted due to failing 176.gcc and
126.gcc nightly tests. These failures uncovered latent bugs that machine DCE
could remove one half of a stack adjust down/up pair, causing PEI to assert.
This update fixes that, and the tests now pass.

llvm-svn: 96822
2010-02-22 23:10:38 +00:00
Jim Grosbach
2acf602672 80 column cleanup
llvm-svn: 96393
2010-02-16 21:23:02 +00:00
Jim Grosbach
0c678d7b17 Remove trailing whitespace
llvm-svn: 96388
2010-02-16 21:07:46 +00:00
Johnny Chen
c6ca0de853 Added BKPT/tBKPT (breakpoint) to the instruction table for disassembly purpose.
llvm-svn: 95884
2010-02-11 18:12:29 +00:00
Jim Grosbach
bdc0ff13db Radar 7417921
tMOVCCi pattern only valid for low registers, as the Thumb1 mov immediate to
register instruction only works with low registers. Allowing high registers
for the instruction resulted in the assembler choosing the wide (32-bit)
encoding for the mov, but LLVM though the instruction was only 16 bits wide,
so offset calculations for constant pools became incorrect, leading to
out of range constant pool entries.

llvm-svn: 95686
2010-02-09 19:51:37 +00:00
Jim Grosbach
a7e098af3b tighten up eh.setjmp sequence a bit.
llvm-svn: 95603
2010-02-08 23:22:00 +00:00
Jim Grosbach
e96f9c1cab Adjust setjmp instruction sequence to not need 32-bit alignment padding
llvm-svn: 94627
2010-01-27 00:07:20 +00:00
Jim Grosbach
231a0d01a9 Fix PR5694. The CMN instructions set the flags differently from CMP, so they
cannot be directly interchanged for comparisons against negated values.
Disable the CMN instructions for the time being.

llvm-svn: 94119
2010-01-22 00:08:13 +00:00
Johnny Chen
a5f79a6b93 The most significant encoding bit of GPR:$src or GPR:$dst was over-specified in
the various MOV (register) instructions (16-bit Thumb), including tBRIND (the
indirect branch).  Instead of '1', it should be specified as '?', because GPR
only specifies the register class, which includes both hi-and-lo registers.

llvm-svn: 93759
2010-01-18 20:15:56 +00:00
Johnny Chen
a5f2e84b0c Added 16-bit Thumb Load/Store immediate instructions with encoding bits so that
the disassembler can properly decode Load/Store register/immediate instructions.

llvm-svn: 93471
2010-01-14 22:42:17 +00:00
Johnny Chen
08c211683b Fixed a couple of places for Thumb MOV where encoding bits are underspecified.
llvm-svn: 93349
2010-01-13 21:00:26 +00:00
Jakob Stoklund Olesen
2d819b93a2 Remove the JustSP single-register regclass.
It was only being used by instructions with the t_addrmode_sp addressing mode,
and that is pattern matched in a way that guarantees SP is used. There is
never any register allocation done from this class.

llvm-svn: 93280
2010-01-13 00:43:06 +00:00
Jakob Stoklund Olesen
9d1c8ecf05 Add a SPR register class to the ARM target.
Certain Thumb instructions require only SP (e.g. tSTRspi).

llvm-svn: 91944
2009-12-22 23:54:44 +00:00
Johnny Chen
04b3259f9d Renamed "tCMNZ" to "tCMNz" to be consistent with other similar namings.
llvm-svn: 91571
2009-12-16 23:36:52 +00:00
Johnny Chen
7339b74117 Add encoding bits for some Thumb instructions. Plus explicitly set the top two
bytes of Inst to 0x0000 for the benefit of the Thumb decoder.

llvm-svn: 91496
2009-12-16 02:32:54 +00:00
Johnny Chen
8ef481b5d7 Added encoding bits for the Thumb ISA. Initial checkin.
llvm-svn: 91434
2009-12-15 17:24:14 +00:00
Jim Grosbach
5541b5f793 Thumb1 exception handling setjmp
llvm-svn: 90246
2009-12-01 18:10:36 +00:00
Evan Cheng
9f57c4916e Remat VLDRD from constpool. Clean up some instruction property specifications.
llvm-svn: 89478
2009-11-20 19:57:15 +00:00
Evan Cheng
987b8c3d9a More consistent thumb1 asm printing.
llvm-svn: 89328
2009-11-19 06:57:41 +00:00
Evan Cheng
6e3e66375a - Add pseudo instructions tLDRpci_pic and t2LDRpci_pic which does a pc-relative
load of a GV from constantpool and then add pc. It allows the code sequence to
  be rematerializable so it would be hoisted by machine licm.
- Add a late pass to break these pseudo instructions into a number of real
  instructions. Also move the code in Thumb2 IT pass that breaks up t2MOVi32imm
  to this pass. This is done before post regalloc scheduling to allow the
  scheduler to proper schedule these instructions. It also allow them to be
  if-converted and shrunk by later passes.

llvm-svn: 86304
2009-11-06 23:52:48 +00:00
Evan Cheng
22121f4c69 The .n suffix must go after the predicate.
llvm-svn: 86019
2009-11-04 07:38:48 +00:00
Evan Cheng
1a06b12330 Use ldr.n to workaround a darwin assembler bug.
llvm-svn: 85980
2009-11-04 00:00:39 +00:00
Bob Wilson
97331f70ca For Thumb indirect branches, use "mov pc, reg" which does not switch
between ARM/Thumb modes and does not require the low bit of the target
address to be set for Thumb.

llvm-svn: 85874
2009-11-03 06:29:56 +00:00
Bob Wilson
3144715b53 Put BlockAddresses into ARM constant pools.
llvm-svn: 85824
2009-11-02 20:59:23 +00:00
Evan Cheng
de16fff3e8 Use cbz and cbnz instructions.
llvm-svn: 85698
2009-10-31 23:46:45 +00:00
Bob Wilson
95064e348a Add ARM codegen for indirect branches.
clang/test/CodeGen/indirect-goto.c runs! (unoptimized)

llvm-svn: 85577
2009-10-30 05:45:42 +00:00
Dan Gohman
3393a4c997 Rename usesCustomDAGSchedInserter to usesCustomInserter, and update a
bunch of associated comments, because it doesn't have anything to do
with DAGs or scheduling. This is another step in decoupling MachineInstr
emitting from scheduling.

llvm-svn: 85517
2009-10-29 18:10:34 +00:00
Bob Wilson
af37728221 Add a Thumb BRIND pattern. Change the ARM BRIND assembly to separate the
opcode and operand with a tab.  Check for these instructions in the usual
places.

llvm-svn: 85411
2009-10-28 18:26:41 +00:00
Evan Cheng
f30e5556ba Change Thumb1 and Thumb2 instructions to separate opcode from operands with a tab instead of a space.
llvm-svn: 85184
2009-10-27 00:08:59 +00:00
Evan Cheng
241092d89f Add hasExtraSrcRegAllocReq and hasExtraDefRegAllocReq flags to ld / st multiple,
ld / st pairs, etc.

llvm-svn: 83197
2009-10-01 08:22:27 +00:00
Evan Cheng
4dd7d7156e Change ld/st multiples to explicitly model the writeback to base register. This fixes most of the -ldstopti-before-sched2 regressions.
llvm-svn: 83191
2009-10-01 01:33:39 +00:00
Jim Grosbach
2d057f09e8 Add "isBarrier = 1" to return instructions.
Patch by Sylvere Teissier.

llvm-svn: 83135
2009-09-30 01:35:11 +00:00
Evan Cheng
6c89bc0472 Remove comments which don't add much to .s readibility.
llvm-svn: 81306
2009-09-09 01:38:23 +00:00
David Goodwin
0dd9e9edb4 Calls clobber FPSCR.
llvm-svn: 80956
2009-09-03 22:12:28 +00:00
Evan Cheng
493eee1fc7 Remove .n suffix for some 16-bit opcodes now that Darwin assembler is fixed.
llvm-svn: 80615
2009-08-31 20:14:07 +00:00
Evan Cheng
d53546a6cd Print a nl before pic labels so they start at a new line. This makes assembly more readable.
llvm-svn: 80350
2009-08-28 06:59:37 +00:00
Evan Cheng
2d5d3700e9 v4, v5 does not support sxtb / sxth.
llvm-svn: 80322
2009-08-28 00:31:43 +00:00
Bob Wilson
9482015a0a Rename ARM "lane_cst" operands to "nohash_imm" since they are used for
several things other than Neon vector lane numbers.  For inline assembly
operands with a "c" print code, check that they really are immediates.

llvm-svn: 79676
2009-08-21 21:58:55 +00:00
Evan Cheng
86546fb692 Fix an obvious copy-n-paste bug.
llvm-svn: 79535
2009-08-20 17:01:04 +00:00
David Goodwin
d57f44783c Update Cortex-A8 instruction itineraries for integer instructions.
llvm-svn: 79436
2009-08-19 18:00:44 +00:00