Both LLVM 8.0.0 and current trunk fail to compile on Solaris with GCC 8.1.0:
/vol/llvm/src/llvm/dist/utils/FileCheck/FileCheck.cpp: In function ‘void DumpAnnotatedInput(llvm::raw_ostream&, const llvm::FileCheckRequest&, llvm::StringRef, std::vector<InputAnnotation>&, unsigned int)’:
/vol/llvm/src/llvm/dist/utils/FileCheck/FileCheck.cpp:408:41: error: call of overloaded ‘log10(unsigned int&)’ is ambiguous
unsigned LineNoWidth = log10(LineCount) + 1;
^
In file included from /vol/gcc-8/lib/gcc/i386-pc-solaris2.11/8.1.0/include-fixed/math.h:24,
from /vol/gcc-8/include/c++/8.1.0/cmath:45,
from /vol/llvm/src/llvm/dist/include/llvm-c/DataTypes.h:28,
from /vol/llvm/src/llvm/dist/include/llvm/Support/DataTypes.h:16,
from /vol/llvm/src/llvm/dist/include/llvm/ADT/Hashing.h:47,
from /vol/llvm/src/llvm/dist/include/llvm/ADT/ArrayRef.h:12,
from /vol/llvm/src/llvm/dist/include/llvm/Support/CommandLine.h:22,
from /vol/llvm/src/llvm/dist/utils/FileCheck/FileCheck.cpp:18:
/vol/gcc-8/lib/gcc/i386-pc-solaris2.11/8.1.0/include-fixed/iso/math_iso.h:209:21: note: candidate: ‘long double std::log10(long double)’
inline long double log10(long double __X) { return __log10l(__X); }
^~~~~
/vol/gcc-8/lib/gcc/i386-pc-solaris2.11/8.1.0/include-fixed/iso/math_iso.h:170:15: note: candidate: ‘float std::log10(float)’
inline float log10(float __X) { return __log10f(__X); }
^~~~~
/vol/gcc-8/lib/gcc/i386-pc-solaris2.11/8.1.0/include-fixed/iso/math_iso.h:70:15: note: candidate: ‘double std::log10(double)’
extern double log10 __P((double));
^~~~~
Fixed by using std::log10 instead, which allowed the compilation on i386-pc-solaris2.11
and sparc-sun-solaris2.11 to continue.
Differential Revision: https://reviews.llvm.org/D60043
llvm-svn: 357509
Summary:
While the backend code of FileCheck relies on definition of variable
from the command-line to have an equal sign '=' and a variable name
before that, the frontend does not actually enforce it. This leads to
FileCheck crashing when invoked with invalid syntax for the -D option.
This patch adds the missing validation in the frontend. It also makes
the -D option an AlwaysPrefix option to be able to detect -D=FOO as
being a define without variable and -D as missing its value.
Copyright:
- Linaro (changes in version 2 of revision D55940)
- GraphCore (changes in later versions)
Reviewers: jdenny
Subscribers: JonChesterfield, hiraditya, kristina, probinson,
llvm-commits
Differential Revision: https://reviews.llvm.org/D55940
llvm-svn: 353173
The old diagnostic form of the trace produced by -v and -vv looks
like:
```
check1:1:8: remark: CHECK: expected string found in input
CHECK: abc
^
<stdin>:1:3: note: found here
; abc def
^~~
```
When dumping annotated input is requested (via -dump-input), I find
that this old trace is not useful and is sometimes harmful:
1. The old trace is mostly redundant because the same basic
information also appears in the input dump's annotations.
2. The old trace buries any error diagnostic between it and the input
dump, but I find it useful to see any error diagnostic up front.
3. FILECHECK_OPTS=-dump-input=fail requests annotated input dumps only
for failed FileCheck calls. However, I have to also add -v or -vv
to get a full set of annotations, and that can produce massive
output from all FileCheck calls in all tests. That's a real
problem when I run this in the IDE I use, which grinds to a halt as
it tries to capture all that output.
When -dump-input=fail|always, this patch suppresses the old trace from
-v or -vv. Error diagnostics still print as usual. If you want the
old trace, perhaps to see variable expansions, you can set
-dump-input=none (the default).
Reviewed By: probinson
Differential Revision: https://reviews.llvm.org/D55825
llvm-svn: 351881
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
Summary:
While the backend code of FileCheck relies on definition of variable
from the command-line to have an equal sign '=' and a variable name
before that, the frontend does not actually enforce it. This leads to
FileCheck crashing when invoked with invalid syntax for the -D option.
This patch adds the missing validation in the frontend. It also makes
the -D option an AlwaysPrefix option to be able to detect -D=FOO as
being a define without variable and -D as missing its value.
Copyright:
- Linaro (changes in version 2 of revision D55940)
- GraphCore (changes in later versions)
Reviewers: jdenny
Subscribers: JonChesterfield, hiraditya, kristina, probinson,
llvm-commits
Differential Revision: https://reviews.llvm.org/D55940
llvm-svn: 351039
Apply final suggestions from probinson for this patch series plus a
few more tweaks:
* Improve various docs, for MatchType in particular.
* Rename some members of MatchType. The main problem was that the
term "final match" became a misnomer when CHECK-COUNT-<N> was
created.
* Split InputStartLine, etc. declarations into multiple lines.
Differential Revision: https://reviews.llvm.org/D55738
Reviewed By: probinson
llvm-svn: 349425
This patch implements annotations for diagnostics reporting CHECK-NOT
failed matches. These diagnostics are enabled by -vv. As for
diagnostics reporting failed matches for other directives, these
annotations mark the search ranges using `X~~`. The difference here
is that failed matches for CHECK-NOT are successes not errors, so they
are green not red when colors are enabled.
For example:
```
$ FileCheck -dump-input=help
The following description was requested by -dump-input=help to
explain the input annotations printed by -dump-input=always and
-dump-input=fail:
- L: labels line number L of the input file
- T:L labels the only match result for a pattern of type T from line L of
the check file
- T:L'N labels the Nth match result for a pattern of type T from line L of
the check file
- ^~~ marks good match (reported if -v)
- !~~ marks bad match, such as:
- CHECK-NEXT on same line as previous match (error)
- CHECK-NOT found (error)
- CHECK-DAG overlapping match (discarded, reported if -vv)
- X~~ marks search range when no match is found, such as:
- CHECK-NEXT not found (error)
- CHECK-NOT not found (success, reported if -vv)
- CHECK-DAG not found after discarded matches (error)
- ? marks fuzzy match when no match is found
- colors success, error, fuzzy match, discarded match, unmatched input
If you are not seeing color above or in input dumps, try: -color
$ FileCheck -vv -dump-input=always check5 < input5 |& sed -n '/^<<<</,$p'
<<<<<<
1: abcdef
check:1 ^~~
not:2 X~~
2: ghijkl
not:2 ~~~
check:3 ^~~
3: mnopqr
not:4 X~~~~~
4: stuvwx
not:4 ~~~~~~
5:
eof:4 ^
>>>>>>
$ cat check5
CHECK: abc
CHECK-NOT: foobar
CHECK: jkl
CHECK-NOT: foobar
$ cat input5
abcdef
ghijkl
mnopqr
stuvwx
```
Reviewed By: george.karpenkov, probinson
Differential Revision: https://reviews.llvm.org/D53899
llvm-svn: 349424
This patch implements input annotations for diagnostics reporting
CHECK-DAG discarded matches. These diagnostics are enabled by -vv.
These annotations mark discarded match ranges using `!~~` because they
are bad matches even though they are not errors.
CHECK-DAG discarded matches create another case where there can be
multiple match results for the same directive.
For example:
```
$ FileCheck -dump-input=help
The following description was requested by -dump-input=help to
explain the input annotations printed by -dump-input=always and
-dump-input=fail:
- L: labels line number L of the input file
- T:L labels the only match result for a pattern of type T from line L of
the check file
- T:L'N labels the Nth match result for a pattern of type T from line L of
the check file
- ^~~ marks good match (reported if -v)
- !~~ marks bad match, such as:
- CHECK-NEXT on same line as previous match (error)
- CHECK-NOT found (error)
- CHECK-DAG overlapping match (discarded, reported if -vv)
- X~~ marks search range when no match is found, such as:
- CHECK-NEXT not found (error)
- CHECK-DAG not found after discarded matches (error)
- ? marks fuzzy match when no match is found
- colors success, error, fuzzy match, discarded match, unmatched input
If you are not seeing color above or in input dumps, try: -color
$ FileCheck -vv -dump-input=always check4 < input4 |& sed -n '/^<<<</,$p'
<<<<<<
1: abcdef
dag:1 ^~~~
dag:2'0 !~~~ discard: overlaps earlier match
2: cdefgh
dag:2'1 ^~~~
check:3 X~ error: no match found
>>>>>>
$ cat check4
CHECK-DAG: abcd
CHECK-DAG: cdef
CHECK: efgh
$ cat input4
abcdef
cdefgh
```
This shows that the line 3 CHECK fails to match even though its
pattern appears in the input because its search range starts after the
line 2 CHECK-DAG's match range. The trouble might be that the line 2
CHECK-DAG's match range is later than expected because its first match
range overlaps with the line 1 CHECK-DAG match range and thus is
discarded.
Because `!~~` for CHECK-DAG does not indicate an error, it is not
colored red. Instead, when colors are enabled, it is colored cyan,
which suggests a match that went cold.
Reviewed By: george.karpenkov, probinson
Differential Revision: https://reviews.llvm.org/D53898
llvm-svn: 349423
This patch implements input annotations for diagnostics enabled by -v,
which report good matches for directives. These annotations mark
match ranges using `^~~`.
For example:
```
$ FileCheck -dump-input=help
The following description was requested by -dump-input=help to
explain the input annotations printed by -dump-input=always and
-dump-input=fail:
- L: labels line number L of the input file
- T:L labels the only match result for a pattern of type T from line L of
the check file
- T:L'N labels the Nth match result for a pattern of type T from line L of
the check file
- ^~~ marks good match (reported if -v)
- !~~ marks bad match, such as:
- CHECK-NEXT on same line as previous match (error)
- CHECK-NOT found (error)
- X~~ marks search range when no match is found, such as:
- CHECK-NEXT not found (error)
- ? marks fuzzy match when no match is found
- colors success, error, fuzzy match, unmatched input
If you are not seeing color above or in input dumps, try: -color
$ FileCheck -v -dump-input=always check3 < input3 |& sed -n '/^<<<</,$p'
<<<<<<
1: abc foobar def
check:1 ^~~
not:2 !~~~~~ error: no match expected
check:3 ^~~
>>>>>>
$ cat check3
CHECK: abc
CHECK-NOT: foobar
CHECK: def
$ cat input3
abc foobar def
```
-vv enables these annotations for FileCheck's implicit EOF patterns as
well. For an example where EOF patterns become relevant, see patch 7
in this series.
If colors are enabled, `^~~` is green to suggest success.
-v plus color enables highlighting of input text that has no final
match for any expected pattern. The highlight uses a cyan background
to suggest a cold section. This highlighting can make it easier to
spot text that was intended to be matched but that failed to be
matched in a long series of good matches.
CHECK-COUNT-<num> good matches are another case where there can be
multiple match results for the same directive.
Reviewed By: george.karpenkov, probinson
Differential Revision: https://reviews.llvm.org/D53897
llvm-svn: 349422
This patch implements input annotations for diagnostics that report
unexpected matches for CHECK-NOT. Like wrong-line matches for
CHECK-NEXT, CHECK-SAME, and CHECK-EMPTY, these annotations mark match
ranges using red `!~~` to indicate bad matches that are errors.
For example:
```
$ FileCheck -dump-input=help
The following description was requested by -dump-input=help to
explain the input annotations printed by -dump-input=always and
-dump-input=fail:
- L: labels line number L of the input file
- T:L labels the only match result for a pattern of type T from line L of
the check file
- T:L'N labels the Nth match result for a pattern of type T from line L of
the check file
- !~~ marks bad match, such as:
- CHECK-NEXT on same line as previous match (error)
- CHECK-NOT found (error)
- X~~ marks search range when no match is found, such as:
- CHECK-NEXT not found (error)
- ? marks fuzzy match when no match is found
- colors error, fuzzy match
If you are not seeing color above or in input dumps, try: -color
$ FileCheck -v -dump-input=always check3 < input3 |& sed -n '/^<<<</,$p'
<<<<<<
1: abc foobar def
not:2 !~~~~~ error: no match expected
>>>>>>
$ cat check3
CHECK: abc
CHECK-NOT: foobar
CHECK: def
$ cat input3
abc foobar def
```
Reviewed By: george.karpenkov, probinson
Differential Revision: https://reviews.llvm.org/D53896
llvm-svn: 349421
This patch implements input annotations for diagnostics that report
wrong-line matches for the directives CHECK-NEXT, CHECK-SAME, and
CHECK-EMPTY. Instead of the usual `^~~`, which is used by later
patches for good matches, these annotations use `!~~` to mark the bad
match ranges so that this category of errors is visually distinct.
Because such matches are errors, these annotates are red when colors
are enabled.
For example:
```
$ FileCheck -dump-input=help
The following description was requested by -dump-input=help to
explain the input annotations printed by -dump-input=always and
-dump-input=fail:
- L: labels line number L of the input file
- T:L labels the only match result for a pattern of type T from line L of
the check file
- T:L'N labels the Nth match result for a pattern of type T from line L of
the check file
- !~~ marks bad match, such as:
- CHECK-NEXT on same line as previous match (error)
- X~~ marks search range when no match is found, such as:
- CHECK-NEXT not found (error)
- ? marks fuzzy match when no match is found
- colors error, fuzzy match
If you are not seeing color above or in input dumps, try: -color
$ FileCheck -v -dump-input=always check2 < input2 |& sed -n '/^<<<</,$p'
<<<<<<
1: foo bar
next:2 !~~ error: match on wrong line
>>>>>>
$ cat check2
CHECK: foo
CHECK-NEXT: bar
$ cat input2
foo bar
```
Reviewed By: george.karpenkov, probinson
Differential Revision: https://reviews.llvm.org/D53894
llvm-svn: 349420
This patch implements input annotations for diagnostics that suggest
fuzzy matches for directives for which no matches were found. Instead
of using the usual `^~~`, which is used by later patches for good
matches, these annotations use `?` so that fuzzy matches are visually
distinct. No tildes are included as these diagnostics (independently
of this patch) currently identify only the start of the match.
For example:
```
$ FileCheck -dump-input=help
The following description was requested by -dump-input=help to
explain the input annotations printed by -dump-input=always and
-dump-input=fail:
- L: labels line number L of the input file
- T:L labels the only match result for a pattern of type T from line L of
the check file
- T:L'N labels the Nth match result for a pattern of type T from line L of
the check file
- X~~ marks search range when no match is found
- ? marks fuzzy match when no match is found
- colors error, fuzzy match
If you are not seeing color above or in input dumps, try: -color
$ FileCheck -v -dump-input=always check1 < input1 |& sed -n '/^<<<</,$p'
<<<<<<
1: ; abc def
2: ; ghI jkl
next:3'0 X~~~~~~~~ error: no match found
next:3'1 ? possible intended match
>>>>>>
$ cat check1
CHECK: abc
CHECK-SAME: def
CHECK-NEXT: ghi
CHECK-SAME: jkl
$ cat input1
; abc def
; ghI jkl
```
This patch introduces the concept of multiple "match results" per
directive. In the above example, the first match result for the
CHECK-NEXT directive is the failed match, for which the annotation
shows the search range. The second match result is the fuzzy match.
Later patches will introduce other cases of multiple match results per
directive.
When colors are enabled, `?` is colored magenta. That is, it doesn't
indicate the actual error, which a red `X~~` marker indicates, but its
color suggests it's closely related.
Reviewed By: george.karpenkov, probinson
Differential Revision: https://reviews.llvm.org/D53893
llvm-svn: 349419
Extend FileCheck to dump its input annotated with FileCheck's
diagnostics: errors, good matches if -v, and additional information if
-vv. The goal is to make it easier to visualize FileCheck's matching
behavior when debugging.
Each patch in this series implements input annotations for a
particular category of FileCheck diagnostics. While the first few
patches alone are somewhat useful, the annotations become much more
useful as later patches implement annotations for -v and -vv
diagnostics, which show the matching behavior leading up to the error.
This first patch implements boilerplate plus input annotations for
error diagnostics reporting that no matches were found for a
directive. These annotations mark the search ranges of the failed
directives. Instead of using the usual `^~~`, which is used by later
patches for good matches, these annotations use `X~~` so that this
category of errors is visually distinct.
For example:
```
$ FileCheck -dump-input=help
The following description was requested by -dump-input=help to
explain the input annotations printed by -dump-input=always and
-dump-input=fail:
- L: labels line number L of the input file
- T:L labels the match result for a pattern of type T from line L of
the check file
- X~~ marks search range when no match is found
- colors error
If you are not seeing color above or in input dumps, try: -color
$ FileCheck -v -dump-input=always check1 < input1 |& sed -n '/^Input file/,$p'
Input file: <stdin>
Check file: check1
-dump-input=help describes the format of the following dump.
Full input was:
<<<<<<
1: ; abc def
2: ; ghI jkl
next:3 X~~~~~~~~ error: no match found
>>>>>>
$ cat check1
CHECK: abc
CHECK-SAME: def
CHECK-NEXT: ghi
CHECK-SAME: jkl
$ cat input1
; abc def
; ghI jkl
```
Some additional details related to the boilerplate:
* Enabling: The annotated input dump is enabled by `-dump-input`,
which can also be set via the `FILECHECK_OPTS` environment variable.
Accepted values are `help`, `always`, `fail`, or `never`. As shown
above, `help` describes the format of the dump. `always` is helpful
when you want to investigate a successful FileCheck run, perhaps for
an unexpected pass. `-dump-input-on-failure` and
`FILECHECK_DUMP_INPUT_ON_FAILURE` remain as a deprecated alias for
`-dump-input=fail`.
* Diagnostics: The usual diagnostics are not suppressed in this mode
and are printed first. For brevity in the example above, I've
omitted them using a sed command. Sometimes they're perfectly
sufficient, and then they make debugging quicker than if you were
forced to hunt through a dump of long input looking for the error.
If you think they'll get in the way sometimes, keep in mind that
it's pretty easy to grep for the start of the input dump, which is
`<<<`.
* Colored Annotations: The annotated input is colored if colors are
enabled (enabling colors can be forced using -color). For example,
errors are red. However, as in the above example, colors are not
vital to reading the annotations.
I don't know how to test color in the output, so any hints here would
be appreciated.
Reviewed By: george.karpenkov, zturner, probinson
Differential Revision: https://reviews.llvm.org/D52999
llvm-svn: 349418
This feature makes it easy to tune FileCheck diagnostic output when
running the test suite via ninja, a bot, or an IDE. For example:
```
$ FILECHECK_OPTS='-color -v -dump-input-on-failure' \
LIT_FILTER='OpenMP/for_codegen.cpp' ninja check-clang \
| less -R
```
Reviewed By: probinson
Differential Revision: https://reviews.llvm.org/D53517
llvm-svn: 346272
(Relands r344930, reverted in r344935, and now hopefully fixed for
Windows.)
While this change specifically targets FileCheck, it affects any tool
using the same SourceMgr facilities.
Previously, -color was documented in FileCheck's -help output, but
-color had no effect. Now, -color obeys its documentation: it forces
colors to be used in FileCheck diagnostics even when stderr is not a
terminal.
-color is especially helpful when combined with FileCheck's -v, which
can produce a long series of diagnostics that you might wish to pipe
to a pager, such as less -R. The WithColor extensions here will also
help to clean up color usage in FileCheck's annotated dump of input,
which is proposed in D52999.
Reviewed By: JDevlieghere, zturner
Differential Revision: https://reviews.llvm.org/D53419
llvm-svn: 345202
https://reviews.llvm.org/D50283
reviewed by bogner
This patch refactors FileCheck's implementation into support so it can
be used from C++ in other places (Unit tests).
llvm-svn: 339192
A DAG-NOT-DAG is a CHECK-DAG group, X, followed by a CHECK-NOT group,
N, followed by a CHECK-DAG group, Y. Let y be the initial directive
of Y. This patch makes the following changes to the behavior:
1. Directives in N can no longer match within part of Y's match
range just because y happens not to be the earliest match from
Y. Specifically, this patch withdraws N's search range end
from y's match range start to Y's match range start.
2. y can no longer match within X's match range, where a y match
produced a reordering complaint, which is thus no longer
possible. Specifically, this patch withdraws y's search range
start from X's permitted range start to X's match range end,
which was already the search range start for other members of
Y.
Both of these changes can only increase the number of test passes: #1
constrains the ability of CHECK-NOTs to match, and #2 expands the
ability of CHECK-DAGs to match without complaints.
These changes are based on discussions at:
<http://lists.llvm.org/pipermail/llvm-dev/2018-May/123550.html>
<https://reviews.llvm.org/D47106>
which conclude that:
1. These changes simplify the FileCheck conceptual model. First,
it makes search ranges for DAG-NOT-DAG more consistent with
other cases. Second, it was confusing that y was treated
differently from the rest of Y.
2. These changes add theoretical use cases for DAG-NOT-DAG that
had no obvious means to be expressed otherwise. We can justify
the first half of this assertion with the observation that
these changes can only increase the number of test passes.
3. Reordering detection for DAG-NOT-DAG had no obvious real
benefit.
We don't have evidence from real uses cases to help us debate
conclusions #2 and #3, but #1 at least seems intuitive.
Reviewed By: probinson
Differential Revision: https://reviews.llvm.org/D48986
llvm-svn: 337605
-v prints all directive pattern matches.
-vv additionally prints info that might be noise to users but that can
be helpful to FileCheck developers.
To maximize code reuse and to make diagnostics more consistent, this
patch also adjusts and extends some of the existing diagnostics.
CHECK-NOT failures now report variables uses. Many more diagnostics
now report the check prefix and kind of directive.
Reviewed By: probinson
Differential Revision: https://reviews.llvm.org/D47114
llvm-svn: 336967
That is, make CHECK-DAG skip matches that overlap the matches of any
preceding consecutive CHECK-DAG directives. This change makes
CHECK-DAG more consistent with other directives, and there is evidence
it makes CHECK-DAG more intuitive and less error-prone. See the RFC
discussion starting at:
http://lists.llvm.org/pipermail/llvm-dev/2018-May/123010.html
Moreover, this behavior enables CHECK-DAG groups for unordered,
non-unique strings or patterns. For example, it is useful for
verifying output or logs from a parallel program, such as the OpenMP
runtime.
This patch also implements the command-line option
-allow-deprecated-dag-overlap, which reverts CHECK-DAG to the old
overlapping behavior. This option should not be used in new tests.
It is meant only for the existing tests that are broken by this change
and that need time to update.
See the following bugzilla issue for tracking of such tests:
https://bugs.llvm.org/show_bug.cgi?id=37532
Patches to add -allow-deprecated-dag-overlap to those tests will
follow immediately.
Reviewed By: probinson
Differential Revision: https://reviews.llvm.org/D47106
llvm-svn: 336847
That is, make CHECK-DAG skip matches that overlap the matches of any
preceding consecutive CHECK-DAG directives. This change makes
CHECK-DAG more consistent with other directives, and there is evidence
it makes CHECK-DAG more intuitive and less error-prone. See the RFC
discussion starting at:
http://lists.llvm.org/pipermail/llvm-dev/2018-May/123010.html
Moreover, this behavior enables CHECK-DAG groups for unordered,
non-unique strings or patterns. For example, it is useful for
verifying output or logs from a parallel program, such as the OpenMP
runtime.
This patch also implements the command-line option
-allow-deprecated-dag-overlap, which reverts CHECK-DAG to the old
overlapping behavior. This option should not be used in new tests.
It is meant only for the existing tests that are broken by this change
and that need time to update.
See the following bugzilla issue for tracking of such tests:
https://bugs.llvm.org/show_bug.cgi?id=37532
Patches to add -allow-deprecated-dag-overlap to those tests will
follow immediately.
Reviewed By: probinson
Differential Revision: https://reviews.llvm.org/D47106
llvm-svn: 336830
Prior to this change, there was no clean way of getting FileCheck to
check that a line is completely empty. The expected way of using
"CHECK: {{^$}}" does not work because the '^' matches the end of the
previous match (this behaviour may be desirable in certain instances).
For the same reason, "CHECK-NEXT: {{^$}}" will fail when the previous
match was at the end of the line, as the pattern will match there.
Using the recommended [[:space:]] to match an explicit new line could
also match a space, and thus is not always desired. Literal '\n'
matches also do not work. A workaround was suggested in the review, but
it is a little clunky.
This change adds a new directive that behaves the same as CHECK-NEXT,
except that it only matches against empty lines (nothing, not even
whitespace, is allowed). As with CHECK-NEXT, it will fail if more than
one newline occurs before the next blank line. Example usage:
; test.txt
foo
bar
; CHECK: foo
; CHECK-EMPTY:
; CHECK-NEXT: bar
Differential Revision: https://reviews.llvm.org/D28896
Reviewed by: probinson
llvm-svn: 335613
We have a few functions that virtually all command wants to run on
process startup/shutdown. This patch adds InitLLVM class to do that
all at once, so that we don't need to copy-n-paste boilerplate code
to each llvm command's main() function.
Differential Revision: https://reviews.llvm.org/D45602
llvm-svn: 330046
FileCheck tool crashes when trying to parse --check-prefix argument if there is no any
data after it.
For example test like following would crash if there are no symbols and no EOL mark after `boom`:
# REQUIRES: x86
# RUN: <skipped few lines>
# RUN: llvm-readobj -t %t | FileCheck %s --check-prefix=boom
Patch fixes the issue.
Differential revision: https://reviews.llvm.org/D42057
llvm-svn: 322536
We currently use target_link_libraries without an explicit scope
specifier (INTERFACE, PRIVATE or PUBLIC) when linking executables.
Dependencies added in this way apply to both the target and its
dependencies, i.e. they become part of the executable's link interface
and are transitive.
Transitive dependencies generally don't make sense for executables,
since you wouldn't normally be linking against an executable. This also
causes issues for generating install export files when using
LLVM_DISTRIBUTION_COMPONENTS. For example, clang has a lot of LLVM
library dependencies, which are currently added as interface
dependencies. If clang is in the distribution components but the LLVM
libraries it depends on aren't (which is a perfectly legitimate use case
if the LLVM libraries are being built static and there are therefore no
run-time dependencies on them), CMake will complain about the LLVM
libraries not being in export set when attempting to generate the
install export file for clang. This is reasonable behavior on CMake's
part, and the right thing is for LLVM's build system to explicitly use
PRIVATE dependencies for executables.
Unfortunately, CMake doesn't allow you to mix and match the keyword and
non-keyword target_link_libraries signatures for a single target; i.e.,
if a single call to target_link_libraries for a particular target uses
one of the INTERFACE, PRIVATE, or PUBLIC keywords, all other calls must
also be updated to use those keywords. This means we must do this change
in a single shot. I also fully expect to have missed some instances; I
tested by enabling all the projects in the monorepo (except dragonegg),
and configuring both with and without shared libraries, on both Darwin
and Linux, but I'm planning to rely on the buildbots for other
configurations (since it should be pretty easy to fix those).
Even after this change, we still have a lot of target_link_libraries
calls that don't specify a scope keyword, mostly for shared libraries.
I'm thinking about addressing those in a follow-up, but that's a
separate change IMO.
Differential Revision: https://reviews.llvm.org/D40823
llvm-svn: 319840
Summary:
This makes it very easy to test files that only differ in a constant
value somewhere in the test case.
Reviewers: jlebar, hfinkel, chandlerc, probinson
Reviewed By: probinson
Subscribers: probinson, llvm-commits
Differential Revision: https://reviews.llvm.org/D39629
llvm-svn: 317572
If there's enough data in fron of it the skipped region would just
become arbitrarily large, and we scan for the CHECK-NOT everywhere.
llvm-svn: 304900
If `--enable-var-scope` is in effect, variables with names that
start with `$` are considered to be global. All other variables are
local. All local variables get undefined at the beginning of each
CHECK-LABEL block. Global variables are not affected by CHECK-LABEL.
This makes it easier to ensure that individual tests are not affected
by variables set in preceding tests.
Differential Revision: https://reviews.llvm.org/D30749
llvm-svn: 297396
Make sure FileCheck --strict-whitespace --match-full-lines translates
'CHECK: bla ' into pattern '^ bla $' instead of pattern '^bla$'.
llvm-svn: 290069
The comment in ReadCheckFile claims that both leading and trailing whitespace
are removed, but the associated statement only removes leading whitespace.
llvm-svn: 290061
check file to not be unreasonably slow in the face of multiple check
prefixes.
The previous logic would repeatedly scan potentially large portions of
the check file looking for alternative prefixes. In the worst case this
would scan most of the file looking for a rare prefix between every
single occurance of a common prefix. Even if we bounded the scan, this
would do bad things if the order of the prefixes was "unlucky" and the
distant prefix was scanned for first.
None of this is necessary. It is straightforward to build a state
machine that recognizes the first, longest of the set of alternative
prefixes. That is in fact exactly whan a regular expression does.
This patch builds a regular expression once for the set of prefixes and
then uses it to search incrementally for the next prefix. This requires
some threading of state but actually makes the code dramatically
simpler. I've also added a big comment describing the algorithm as it
was not at all obvious to me when I started.
With this patch, several previously pathological test cases in
test/CodeGen/X86 are 5x and more faster. Overall, running all tests
under test/CodeGen/X86 uses 10% less CPU after this, and because all the
slowest tests were hitting this, finishes in 40% less wall time on my
system (going from just over 5.38s to just over 3.23s) on a release
build! This patch substantially improves the time of all 7 X86 tests
that were in the top 20 reported by --time-tests, 5 of them are
completely off the list and the remaining 2 are much lower. (Sadly, the
new tests on the list include 2 new X86 ones that are slow for unrelated
reasons, so the count stays at 4 of the top 20.)
It isn't clear how much this helps debug builds in aggregate in part
because of the noise, but it again makes mane of the slowest x86 tests
significantly faster (10% or more improvement).
llvm-svn: 289382
This fixes one formatting goof I left in my previous commit and *many*
other inconsistencies.
I'm planning to make substantial changes here and so wanted to get to
a clean baseline.
llvm-svn: 289379
make some readability improvements.
Both the check file and input file have to be fully buffered to
normalize their whitespace. But previously this would be done in a stack
SmallString and then copied into a heap allocated MemoryBuffer. That
seems pretty wasteful, especially for something like FileCheck where
there are only ever two such entities.
This just rearranges the code so that we can keep the canonicalized
buffers on the stack of the main function, use reasonably large stack
buffers to reduce allocation. A rough estimate seems to show that about
80% of LLVM's .ll and .s files will fit into a 4k buffer, so this should
completely avoid heap allocation for the buffer in those cases. My
system's malloc is fast enough that the allocations don't directly show
up in timings. However, on some very slow test cases, this saves 1% - 2%
by avoiding the copy into the heap allocated buffer.
This also splits out the code which checks the input into a helper much
like the code to build the checks as that made the code much more
readable to me. Nit picks and suggestions welcome here. It has really
exposed a *bunch* of stuff that could be cleaned up though, so I'm
probably going to go and spring clean all of this code as I have more
changes coming to speed things up.
llvm-svn: 289378
1. Add the "explicit" specifier to the single-argument constructor of Pattern
2. Reorder the fields to remove excessive padding (8 bytes).
Patch by Alexander Shaposhnikov!
llvm-svn: 279832
Summary:
This new alias takes a comma separated list of prefixes which allows
'--check-prefix=A --check-prefix=B --check-prefix=C' to be written as
'--check-prefixes=A,B,C'.
Reviewers: probinson
Subscribers: probinson, llvm-commits, dsanders
Differential Revision: http://reviews.llvm.org/D21293
llvm-svn: 272670
looking for it along $PATH. This allows installs of LLVM tools outside of
$PATH to find the symbolizer and produce pretty backtraces if they crash.
llvm-svn: 272232
Combinations of suffixes that look useful are actually ignored;
complaining about them will avoid mistakes.
Differential Revision: http://reviews.llvm.org/D17587
llvm-svn: 262263
Combinations of suffixes that look useful actually are ignored;
complaining about them will avoid mistakes.
Differential Revision: http://reviews.llvm.org/D17587
llvm-svn: 262092
Summary:
This patch is provided in preparation for removing autoconf on 1/26. The proposal to remove autoconf on 1/26 was discussed on the llvm-dev thread here: http://lists.llvm.org/pipermail/llvm-dev/2016-January/093875.html
"I felt a great disturbance in the [build system], as if millions of [makefiles] suddenly cried out in terror and were suddenly silenced. I fear something [amazing] has happened."
- Obi Wan Kenobi
Reviewers: chandlerc, grosbach, bob.wilson, tstellarAMD, echristo, whitequark
Subscribers: chfast, simoncook, emaste, jholewinski, tberghammer, jfb, danalbert, srhines, arsenm, dschuff, jyknight, dsanders, joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D16471
llvm-svn: 258861
