By terrible I mean we store/load from the stack.
This matters on PAQp8 in _Z5trainPsS_ii (which is inlined into Mixer::update)
where we decide to vectorize a loop with a VF of 8 resulting in a 25%
degradation on a cortex-a8.
LV: Found an estimated cost of 2 for VF 8 For instruction: icmp slt i32
LV: Found an estimated cost of 2 for VF 8 For instruction: select i1, i32, i32
The bug that tracks the CodeGen part is PR14868.
radar://13403975
llvm-svn: 177105
Increase the cost of v8/v16-i8 to v8/v16-i32 casts and truncates as the backend
currently lowers those using stack accesses.
This was responsible for a significant degradation on
MultiSource/Benchmarks/Trimaran/enc-pc1/enc-pc1
where we vectorize one loop to a vector factor of 16. After this patch we select
a vector factor of 4 which will generate reasonable code.
unsigned char cle[32];
void test(short c) {
unsigned short compte;
for (compte = 0; compte <= 31; compte++) {
cle[compte] = cle[compte] ^ c;
}
}
radar://13220512
llvm-svn: 176898
Summary:
Statistics are still available in Release+Asserts (any +Asserts builds),
and stats can also be turned on with LLVM_ENABLE_STATS.
Move some of the FastISel stats that were moved under DEBUG()
back out of DEBUG(), since stats are disabled across the board now.
Many tests depend on grepping "-stats" output. Move those into
a orig_dir/Stats/. so that they can be marked as unsupported
when building without statistics.
Differential Revision: http://llvm-reviews.chandlerc.com/D486
llvm-svn: 176733
The "invariant.load" metadata indicates the memory unit being accessed is immutable.
A load annotated with this metadata can be moved across any store.
As I am not sure if it is legal to move such loads across barrier/fence, this
change dose not allow such transformation.
rdar://11311484
Thank Arnold for code review.
llvm-svn: 176562
This matters for example in following matrix multiply:
int **mmult(int rows, int cols, int **m1, int **m2, int **m3) {
int i, j, k, val;
for (i=0; i<rows; i++) {
for (j=0; j<cols; j++) {
val = 0;
for (k=0; k<cols; k++) {
val += m1[i][k] * m2[k][j];
}
m3[i][j] = val;
}
}
return(m3);
}
Taken from the test-suite benchmark Shootout.
We estimate the cost of the multiply to be 2 while we generate 9 instructions
for it and end up being quite a bit slower than the scalar version (48% on my
machine).
Also, properly differentiate between avx1 and avx2. On avx-1 we still split the
vector into 2 128bits and handle the subvector muls like above with 9
instructions.
Only on avx-2 will we have a cost of 9 for v4i64.
I changed the test case in test/Transforms/LoopVectorize/X86/avx1.ll to use an
add instead of a mul because with a mul we now no longer vectorize. I did
verify that the mul would be indeed more expensive when vectorized with 3
kernels:
for (i ...)
r += a[i] * 3;
for (i ...)
m1[i] = m1[i] * 3; // This matches the test case in avx1.ll
and a matrix multiply.
In each case the vectorized version was considerably slower.
radar://13304919
llvm-svn: 176403
We make the cost for calling libm functions extremely high as emitting the
calls is expensive and causes spills (on x86) so performance suffers. We still
vectorize important calls like ceilf and friends on SSE4.1. and fabs.
Differential Revision: http://llvm-reviews.chandlerc.com/D466
llvm-svn: 176287
Listing all of the attributes for the callee of a call/invoke instruction is way
too much and makes the IR unreadable. Use references to attributes instead.
llvm-svn: 175877
sext <4 x i1> to <4 x i64>
sext <4 x i8> to <4 x i64>
sext <4 x i16> to <4 x i64>
I'm running Combine on SIGN_EXTEND_IN_REG and revert SEXT patterns:
(sext_in_reg (v4i64 anyext (v4i32 x )), ExtraVT) -> (v4i64 sext (v4i32 sext_in_reg (v4i32 x , ExtraVT)))
The sext_in_reg (v4i32 x) may be lowered to shl+sar operations.
The "sar" does not exist on 64-bit operation, so lowering sext_in_reg (v4i64 x) has no vector solution.
I also added a cost of this operations to the AVX costs table.
llvm-svn: 175619
Profiling tests *do* need a JIT. They'll pass if a cross-compiler targetting
AArch64 by default has been built, but fail if a native AArch64 compiler has
been build. Therefore XFAIL is inappropriate and we mark them unsupported.
ExecutionEngine tests are JIT by definition, they should also be unsupported.
Transforms/LICM only uses the interpreter to check the output is still sane
after optimisation. It can be switched to use an interpreter.
llvm-svn: 175433
Thanks to help from Nadav and Hal, I have a more reasonable (and even
correct!) approach. This specifically penalizes the insertelement
and extractelement operations for the performance hit that will occur
on PowerPC processors.
llvm-svn: 174725
Adds a function to target transform info to query for the cost of address
computation. The cost model analysis pass now also queries this interface.
The code in LoopVectorize adds the cost of address computation as part of the
memory instruction cost calculation. Only there, we know whether the instruction
will be scalarized or not.
Increase the penality for inserting in to D registers on swift. This becomes
necessary because we now always assume that address computation has a cost and
three is a closer value to the architecture.
radar://13097204
llvm-svn: 174713
Swift has a renaming dependency if we load into D subregisters. We don't have a
way of distinguishing between insertelement operations of values from loads and
other values. Therefore, we are pessimistic for now (The performance problem
showed up in example 14 of gcc-loops).
radar://13096933
llvm-svn: 174300
This provides a place to add customized operation cost information and
control some other target-specific IR-level transformations.
The only non-trivial logic in this checkin assigns a higher cost to
unaligned loads and stores (covered by the included test case).
llvm-svn: 173520
Analyse Phis under the starting assumption that they are NoAlias. Recursively
look at their inputs.
If they MayAlias/MustAlias there must be an input that makes them so.
Addresses bug 14351.
llvm-svn: 169788
If the Src and Dst are the same instruction,
no loop-independent dependence is possible,
so we force the PossiblyLoopIndependent flag to false.
The test case results are updated appropriately.
llvm-svn: 168678
analysis. Better is to look for cases with useful GEPs and use them
when possible. When a pair of useful GEPs is not available, use the
raw SCEVs directly. This approach supports better analysis of pointer
dereferencing.
In parallel, all the test cases are updated appropriately.
Cases where we have a store to *B++ can now be analyzed!
llvm-svn: 168474
This is a partial solution to PR14351. It removes some of the special
significance of the first incoming phi value in the phi aliasing checking logic
in BasicAA. In the context of a loop, the old logic assumes that the first
incoming value is the interesting one (meaning that it is the one that comes
from outside the loop), but this is often not the case. With this change, we
now test first the incoming value that comes from a block other than the parent
of the phi being tested.
llvm-svn: 168245
'nocapture' attribute.
The nocapture attribute only specifies that no copies are made that
outlive the function. This isn't the same as there being no copies at all.
This fixes PR14045.
llvm-svn: 167381
Patch from Preston Briggs <preston.briggs@gmail.com>.
This is an updated version of the dependence-analysis patch, including an MIV
test based on Banerjee's inequalities.
It's a fairly complete implementation of the paper
Practical Dependence Testing
Gina Goff, Ken Kennedy, and Chau-Wen Tseng
PLDI 1991
It cannot yet propagate constraints between coupled RDIV subscripts (discussed
in Section 5.3.2 of the paper).
It's organized as a FunctionPass with a single entry point that supports testing
for dependence between two instructions in a function. If there's no dependence,
it returns null. If there's a dependence, it returns a pointer to a Dependence
which can be queried about details (what kind of dependence, is it loop
independent, direction and distance vector entries, etc). I haven't included
every imaginable feature, but there's a good selection that should be adequate
for supporting many loop transformations. Of course, it can be extended as
necessary.
Included in the patch file are many test cases, commented with C code showing
the loops and array references.
llvm-svn: 165708
teach the callgraph logic to not create callgraph edges to intrinsics for invoke
instructions; it already skips this for call instructions. Fixes PR13903.
llvm-svn: 164707
