BIND_OPCODE_SET_DYLIB_SPECIAL_IMM(0) is a valid way to setp library
ordinal. MachOObject should set LibraryOrdinalSet even when IMM is zero.
llvm-svn: 304362
With fix of uninitialized variable.
Original commit message:
This change is intended to use for LLD in D33183.
Problem we have in LLD when building .gdb_index is that we need to know section which address range belongs to.
Previously it was solved on LLD side by providing fake section addresses with use of llvm::LoadedObjectInfo
interface. We assigned file offsets as addressed. Then after obtaining ranges lists, for each range we had to find section ID's.
That not only was slow, but also complicated implementation and was the reason of incorrect behavior when
sections share the same offsets, like D33176 shows.
This patch makes DWARF parsers to return section index as well. That solves problem mentioned above.
Differential revision: https://reviews.llvm.org/D33184
llvm-svn: 304078
This change is intended to use for LLD in D33183.
Problem we have in LLD when building .gdb_index is that we need to know section which address range belongs to.
Previously it was solved on LLD side by providing fake section addresses with use of llvm::LoadedObjectInfo
interface. We assigned file offsets as addressed. Then after obtaining ranges lists, for each range we had to find section ID's.
That not only was slow, but also complicated implementation and was the reason of incorrect behavior when
sections share the same offsets, like D33176 shows.
This patch makes DWARF parsers to return section index as well. That solves problem mentioned above.
Differential revision: https://reviews.llvm.org/D33184
llvm-svn: 304002
With fix of test compilation.
Initial commit message:
This change is intended to use for LLD in D33183.
Problem we have in LLD when building .gdb_index is that we need to know section
which address range belongs to.
Previously it was solved on LLD side by providing fake section addresses
with use of llvm::LoadedObjectInfo interface. We assigned file offsets as addressed.
Then after obtaining ranges lists, for each range we had to find section ID's.
That not only was slow, but also complicated implementation and was the reason
of incorrect behavior when
sections share the same offsets, like D33176 shows.
This patch makes DWARF parsers to return section index as well.
That solves problem mentioned above.
Differential revision: https://reviews.llvm.org/D33184
llvm-svn: 303983
This change is intended to use for LLD in D33183.
Problem we have in LLD when building .gdb_index is that we need to know section
which address range belongs to.
Previously it was solved on LLD side by providing fake section addresses
with use of llvm::LoadedObjectInfo interface. We assigned file offsets as addressed.
Then after obtaining ranges lists, for each range we had to find section ID's.
That not only was slow, but also complicated implementation and was the reason
of incorrect behavior when
sections share the same offsets, like D33176 shows.
This patch makes DWARF parsers to return section index as well.
That solves problem mentioned above.
Differential revision: https://reviews.llvm.org/D33184
llvm-svn: 303978
BIND_OPCODE_DONE/REBASE_OPCODE_DONE may appear at the end of the opcode array,
but they are not required to. The linker only adds them as padding to align the
opcodes to pointer size.
This fixes rdar://problem/31285560.
llvm-svn: 299104
rebase entry errors and test cases for each of the error checks.
Also verified with Nick Kledzik that a BIND_OPCODE_SET_ADDEND_SLEB
opcode is legal in a lazy bind table, so code that had that as an error
check was removed.
With MachORebaseEntry and MachOBindEntry classes now returning
an llvm::Error in all cases for malformed input the variables Malformed
and logic to set use them is no longer needed and has been removed
from those classes.
Also in a few places, removed the redundant Done assignment to true
when also calling moveToEnd() as it does that assignment.
This only leaves the dyld compact export entries left to have
error handling yet to be added for the dyld compact info.
llvm-svn: 298883
and test cases for each of the error checks.
To do this more plumbing was needed so that the segment indexes and
segment offsets can be checked. Basically what was done was the SegInfo
from llvm-objdump’s MachODump.cpp was moved into libObject for Mach-O
objects as BindRebaseSegInfo and it is only created when an iterator for
bind or rebase entries are created.
This commit really only adds the error checking and test cases for the
bind table entires and the checking for the lazy bind and weak bind entries
are still to be fully done as well as the rebase entires. Though some of
the plumbing for those are added with this commit. Those other error
checks and test cases will be added in follow on commits.
Note, the two llvm_unreachable() calls should now actually be unreachable
with the error checks in place and would take a logic bug in the error
checking code to be reached if the segment indexes and segment
offsets are used from a checked bind entry. Comments have been added
to the methods that require the arguments to have been checked
prior to calling.
llvm-svn: 298292
other tables. Providing a helpful error message to what the error is and
where the error occurred based on which opcode it was associated with.
There have been handful of bug fixes dealing with bad bind info in
object files, r294021 and r249845, which only put a band aid on the
problem after a bad bind table was created after unpacking from
its compact info. In these cases a bind table should have never been
created and an error should have simply been generated.
This change puts in place the plumbing to allow checking and returning
of an error when the compact info is unpacked. This follows the model
of iterators that can fail that Lang Hanes designed when fixing the problem
for bad archives r275316 (or r275361).
This change uses one of the existing test cases that now causes an
error instead of printing <<bad library ordinal>> after a bad bind table
is created. The error uses the offset into the opcode table as shown with
the macOS dyldinfo(1) tool to indicate where the error is and which
opcode and which parameter is in error.
For example the exiting test case has this lazy binding opcode table:
% dyldinfo -opcodes test/tools/llvm-objdump/Inputs/bad-ordinal.macho-x86_64
…
lazy binding opcodes:
0x0000 BIND_OPCODE_SET_SEGMENT_AND_OFFSET_ULEB(0x02, 0x00000010)
0x0002 BIND_OPCODE_SET_DYLIB_ORDINAL_IMM(2)
In the test case the binary only has one library so setting the library
ordinal to the value of 2 in the BIND_OPCODE_SET_DYLIB_ORDINAL_IMM
opcode at 0x0002 above is an error. This now produces this error message:
% llvm-objdump -lazy-bind bad-ordinal.macho-x86_64
…
llvm-objdump: 'bad-ordinal.macho-x86_64': truncated or malformed object (for BIND_OPCODE_SET_DYLIB_ORDINAL_ULEB bad library ordinal: 2 (max 1) for opcode at: 0x2)
This change provides the plumbing for the error handling and one example
of an error message. Other error checks and test cases will be added in follow
on commits.
llvm-svn: 296527
in this case for CPU_SUBTYPE_ARM64_ALL.
For this cpusubtype it should default to a cyclone CPU
to give proper disassembly without a -mcpu= flag.
rdar://27767188
llvm-svn: 294771
it was printing the field name fileoff instead of filesize. The original check
was added in r278557.
This was found in tracking down the problem that lead to the fix in
r293842 - [dsymutil] Fix __LINKEDIT vmsize in dsymutil upgrade path
rdar://30386075
llvm-svn: 294354
for CPU_SUBTYPE_ARM_V7S and CPU_SUBTYPE_ARM_V7K.
For these two cpusubtypes they should default to a cortex-a7 CPU
to give proper disassembly without a -mcpu= flag.
rdar://27431703
llvm-svn: 292993
in llvm-objdump for Mach-O files add the printing of the
x86_thread_state32_t in the same format as
otool-classic(1) on darwin.
To do this the 32-bit x86 general tread state
needed to be defined in include/llvm/Support/MachO.h .
rdar://30110111
llvm-svn: 292829
Summary:
Add a new load command LC_BUILD_VERSION. It is a generic version of
LC_*_VERSION_MIN load_command used on Apple platforms. Instead of having
a seperate load command for each platform, LC_BUILD_VERSION is recording
platform info as an enum. It also records SDK version, min_os, and tools
that used to build the binary.
rdar://problem/29781291
Reviewers: enderby
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D29044
llvm-svn: 292824
It describes a region of arbitrary data included in a Mach-O file.
Its initial use is to record extra data in MH_CORE files.
rdar://30001545
rdar://30001731
llvm-svn: 292500
Running a Debug build of objdump -objc-meta-data with a large Mach-O file is
currently unnecessarily slow.
With some local test input, this change reduces the run time from 75-85s down
to 15-20s.
The two changes are:
Assert on pointer equality not array equality
Replace vector<pair<address, symbol>> with DenseMap<address, symbol>
Additionally, use a std::unique_ptr rather than handling the memory manually.
Patch by Dave Lee!
llvm-svn: 291398
The Mach-O command line flag like "-arch armv7m" does not match the
arch name part of its llvm Triple which is "thumbv7m-apple-darwin”.
I think the best way to fix this is to have
llvm::object::MachOObjectFile::getArchTriple() optionally return the
name of the Mach-O arch flag that would be used with -arch that
matches the CPUType and CPUSubType. Then change
llvm::object::MachOUniversalBinary::ObjectForArch::getArchTypeName()
to use that and change it to getArchFlagName() as the type name is
really part of the Triple and the -arch flag name is a Mach-O thing
for a specific Triple with a specific Mcpu value.
rdar://29663637
llvm-svn: 290001
Changes all static helper functions in MachOObjectFile.cpp that expect a
non-null MachOObjectFile pointer to take a reference instead.
llvm-svn: 288608
The philosophy of the error checking in libObject for Mach-O files
is that the constructor will check the load commands so for their
tables the offsets and sizes are properly contained in the file.
But there is no checking of the entries of any of the tables.
For the contents of the tables themselves the methods accessing
the contents of the entries return errors as needed. In some
cases this however makes it difficult or cumbersome to produce
a good error message which would include the tool name, file name,
archive member, and name of the architecture of a slice of a universal file
the error occurred in.
So idea is that there will be a method to check a table which can
be called up front before using it allowing a good error message
to be produced before a table is used. And if only verification of
the Mach-O file and its tables are wanted a new possible method
checkAllTables() could be added to call all of the methods to
check all the tables at some time when such methods exist.
The checkSymbolTable() is the first of such methods to check
one of the Mach-O file tables. This method initially will used in
llvm-objdump’s DisassembleMachO() routine before it gets the
section and symbol information. As if there are problems with
the symbol table currently the error is first encountered by the
bool operator() in the SymbolSorter() struct which passed to
std::sort(). In this case there is no context as to the file name
the symbol which results a poor error message:
LLVM ERROR: truncated or malformed object (bad string index: 22 for symbol at index 1)
with the added call to the checkSymbolTable() method the
error message includes the tool name and file name:
llvm-objdump: 'macho-invalid-symbol-strx': truncated or malformed object (bad string table index: 22 past the end of string table, for symbol at index 1)
llvm-svn: 286887
This is forcing to use Error::success(), which is in a wide majority
of cases a lot more readable.
Differential Revision: https://reviews.llvm.org/D26481
llvm-svn: 286561
in llvm-objdump for Mach-O files add the printing of the
ARM_THREAD_STATE64 in the same format as
otool-classic(1) on darwin.
To do this the 64-bit ARM general tread state
needed to be defined in include/llvm/Support/MachO.h .
rdar://28985800
llvm-svn: 285967
the offsets and sizes of an element of the Mach-O file overlaps with
another element in the Mach-O file.
Some other tests for malformed Mach-O files now run into these
checks so their tests were also adjusted.
llvm-svn: 285860
the offsets and sizes of an element of the file overlaps with
another element in the Mach-O file.
This shows the approach to this testing for three elements
and contains for tests for their overlap. Checking for all the
remain elements will be added next.
llvm-svn: 285632
obsolete load commands.
Again the philosophy of the error checking in libObject for
Mach-O files, the idea behind the checking is that we never
will return a Mach-O file out of libObject that contains unknown
things the library code can’t operate on. So known obsolete
load commands will cause a hard error.
Also to make things clear I have added comments to the
values and structures in Support/Mach-O.h and
Support/MachO.def as to what is obsolete.
As noted in a TODO in the code, there may need to be a
non-default mode to allow some unknown values for well
structured Mach-O files with things like unknown load
load commands. So things like using an old lldb on a newer
Mach-O file could still provide some limited functionality.
llvm-svn: 285342
load commands that use the MachO::twolevel_hints_command type
which includes only the LC_TWOLEVEL_HINTS load command.
This is not used in llvm libObject code or in llvm tool code. But
does appear in one of the binary test files. While this load command is
obsolete it is easier to add code for it in libObject than edit or change
the binary test case.
llvm-svn: 284769
load commands that use the MachO::thread_command type
but are not used in llvm libObject code but used in llvm tool code.
This includes the LC_UNIXTHREAD and LC_THREAD
load commands.
A quick note about the philosophy of the error checking in
libObject for Mach-O files, the idea behind the checking is
that we never will return a Mach-O file out of libObject that
contains unknown things in the load commands.
To do this the 32-bit ARM and PPC general tread states
needed to be defined as two test case binaries contained
them. If other thread states for other CPUs need to be
added we will do that as needed.
Going forward the LC_MAIN load command is used to
set the entry point in Mach-O executables these days
instead of an LC_UNIXTHREAD as was done in the past.
So today only in core files are LC_THREAD load commands
and thread states usually found.
Other thread states have not yet been defined in
include/Support/MachO.h at this time. But that can be
added as needed with their corresponding checking also
added.
llvm-svn: 284668
load command that use the MachO:: linkedit_data_command
type but is not used in llvm libObject code but used in llvm tool code.
This is for the LC_CODE_SIGNATURE load command.
llvm-svn: 284529
load commands that use the MachO::routines_command and
and MachO::routines_command_64 types but are not used in llvm
libObject code but used in llvm tool code.
This includes the LC_ROUTINES and LC_ROUTINES_64
load commands.
llvm-svn: 284504
load commands that use the MachO::sub_framework_command,
MachO::sub_umbrella_command, MachO::sub_library_command
and MachO::sub_client_command types but are not used in llvm
libObject code but used in llvm tool code.
This includes the LC_SUB_FRAMEWORK, LC_SUB_UMBRELLA,
LC_SUB_LIBRARY and LC_SUB_CLIENT load commands.
llvm-svn: 284431
load commands that uses the MachO::linker_option_command
type but not used in llvm libObject code but used in llvm tool code.
This includes just LC_LINKER_OPTION load command.
llvm-svn: 283939
load commands that uses the MachO::encryption_info_command and
MachO::encryption_info_command types but not used in llvm libObject
code but used in llvm tool code.
This includes just LC_ENCRYPTION_INFO and
LC_ENCRYPTION_INFO_64 load commands.
llvm-svn: 283250
load command that uses the MachO::entry_point_command type
but not used in llvm libObject code but used in llvm tool code.
This includes just the LC_MAIN load command.
llvm-svn: 282766
load command that uses the Mach::source_version_command type
but not used in llvm libObject code but used in llvm tool code.
This includes just the LC_SOURCE_VERSION load command.
llvm-svn: 282736
load command that uses the Mach::rpath_command type
but not used in llvm libObject code but used in llvm tool code.
This includes just the LC_RPATH load command.
llvm-svn: 282649
other load commands that use the Mach::version_min_command type
but not used in llvm libObject code but used in llvm tool code.
This includes LC_VERSION_MIN_MACOSX, LC_VERSION_MIN_IPHONEOS,
LC_VERSION_MIN_TVOS and LC_VERSION_MIN_WATCHOS load commands.
llvm-svn: 282635
other load commands that use the MachO::dylinker_command type
but not used in llvm libObject code but used in llvm tool code.
This includes LC_ID_DYLINKER, LC_LOAD_DYLINKER
and LC_DYLD_ENVIRONMENT load commands.
llvm-svn: 282553
other load commands that use the Mach::linkedit_data_command type
but not used in llvm libObject code but used in llvm tool code.
This includes LC_FUNCTION_STARTS, LC_SEGMENT_SPLIT_INFO
and LC_DYLIB_CODE_SIGN_DRS load commands.
llvm-svn: 282441
load commands. Added a missing check and made the check for more than
one like other other “more than one” checks. And of course added test cases.
llvm-svn: 282104
that use the Mach::dylib_command type for the load commands that are
currently used in the MachOObjectFile constructor.
This contains the missing checks for LC_ID_DYLIB, LC_ID_DYLIB, etc.
load commands and the fields for the Mach::dylib_command type.
Also checks that only an MH_DYLIB or MH_STUB_DYLIB has an
LC_ID_DYLIB load command (and others filetype don’t) and there
is not more than one of these load commands.
llvm-svn: 282008
that use the Mach::dyld_info_command type for the load commands that are
currently use in the MachOObjectFile constructor.
This contains the missing checks for LC_DYLD_INFO and
LC_DYLD_INFO_ONLY load commands and the fields for the
Mach::dyld_info_command type.
llvm-svn: 281400
that use the Mach::linkedit_data_command type for the load commands that are
currently used in the MachOObjectFile constructor.
This contains the missing checks for LC_DATA_IN_CODE and
LC_LINKER_OPTIMIZATION_HINT load commands and the fields for the
Mach::linkedit_data_command type. Checking for other load commands that
use this type will be added later.
Also fixed a couple of places that was using sizeof(MachOObjectFile::LoadCommandInfo)
that should have been using sizeof(MachO::load_command).
llvm-svn: 280267
