When using dbg.declare, the debug-info is generated from a list of
locals rather than through DBG_VALUE instructions in the MIR.
This patch is different from D90020 because it emits the DWARF
location expressions from that list of locals directly.
Reviewed By: jmorse
Differential Revision: https://reviews.llvm.org/D90044
Given the ability provided by DWARFv5 rnglists to reuse addresses in the
address pool, it can be advantageous to object file size to use range
encodings even when the range could be described by a direct low/high
pc.
Add a flag to allow enabling this in DWARFv5 for the purpose of
experimentation/data gathering.
It might be that it makes sense to enable this functionality by default
for DWARFv5 + Split DWARF at least, where the tradeoff/desire to
optimize for .o file size is more explicit and .o bytes are higher
priority than .dwo bytes.
To accommodate frame layouts that have both fixed and scalable objects
on the stack, describing a stack location or offset using a pointer + uint64_t
is not sufficient. For this reason, we've introduced the StackOffset class,
which models both the fixed- and scalable sized offsets.
The TargetFrameLowering::getFrameIndexReference is made to return a StackOffset,
so that this can be used in other interfaces, such as to eliminate frame indices
in PEI or to emit Debug locations for variables on the stack.
This patch is purely mechanical and doesn't change the behaviour of how
the result of this function is used for fixed-sized offsets. The patch adds
various checks to assert that the offset has no scalable component, as frame
offsets with a scalable component are not yet supported in various places.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D90018
This is needed to support fortran assumed rank arrays which
have runtime rank.
Summary:
Fortran assumed rank arrays have dynamic rank. DWARF TAG
DW_TAG_generic_subrange is needed to support that.
Testing:
unit test cases added (hand-written)
check llvm
check debug-info
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D89218
Initial support for dwarf fission sections (-gsplit-dwarf) on wasm.
The most interesting change is support for writing 2 files (.o and .dwo) in the
wasm object writer. My approach moves object-writing logic into its own function
and calls it twice, swapping out the endian::Writer (W) in between calls.
It also splits the import-preparation step into its own function (and skips it when writing a dwo).
Differential Revision: https://reviews.llvm.org/D85685
The patch uses a common method to determine the appropriate form for
the value of the attribute.
Differential Revision: https://reviews.llvm.org/D87016
DIELabel can emit only 32- or 64-bit values, while it was created in
some places with DW_FORM_udata, which implies emitting uleb128.
Nevertheless, these places also expected to emit U32 or U64, but just
used a misleading DWARF form. The patch updates those places to use more
appropriate DWARF forms and restricts DIELabel::SizeOf() to accept only
forms that are actually used in the LLVM codebase.
Differential Revision: https://reviews.llvm.org/D84094
Emit DWARF 5 call-site symbols even though DWARF 4 is set,
only in the case of LLDB tuning.
This patch addresses PR46643.
Differential Revision: https://reviews.llvm.org/D83463
Summary:
This support is needed for the Fortran array variables with pointer/allocatable
attribute. This support enables debugger to identify the status of variable
whether that is currently allocated/associated.
for pointer array (before allocation/association)
without DW_AT_associated
(gdb) pt ptr
type = integer (140737345375288:140737354129776)
(gdb) p ptr
value requires 35017956 bytes, which is more than max-value-size
with DW_AT_associated
(gdb) pt ptr
type = integer (:)
(gdb) p ptr
$1 = <not associated>
for allocatable array (before allocation)
without DW_AT_allocated
(gdb) pt arr
type = integer (140737345375288:140737354129776)
(gdb) p arr
value requires 35017956 bytes, which is more than max-value-size
with DW_AT_allocated
(gdb) pt arr
type = integer, allocatable (:)
(gdb) p arr
$1 = <not allocated>
Testing
- unit test cases added
- check-llvm
- check-debuginfo
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D83544
For now, DIEExpr is used only in two places:
1) in the debug info library unit test suite to emit
a DW_AT_str_offsets_base attribute with the DW_FORM_sec_offset
form, see dwarfgen::DIE::addStrOffsetsBaseAttribute();
2) in DwarfCompileUnit::addLocationAttribute() to generate the location
attribute for a TLS variable.
The later case used an incorrect DWARF form of DW_FORM_udata, which
implies storing an uleb128 value, not a 4/8 byte constant. The generated
result was as expected because DIEExpr::SizeOf() did not handle the used
form, but returned the size of the code pointer by default.
The patch fixes the issue by using more appropriate DWARF forms for
the problematic case and making DIEExpr::SizeOf() more straightforward.
Differential Revision: https://reviews.llvm.org/D83958
This patch uses ranges for debug information when a function contains basic block sections rather than using [lowpc, highpc]. This is also the first in a series of patches for debug info and does not contain the support for linker relaxation. That will be done as a follow up patch.
Differential Revision: https://reviews.llvm.org/D78851
Commit d77ae1552fc2 ("[DebugInfo] Support to emit debugInfo
for extern variables") added support to emit debuginfo
for extern variables. Currently, only BPF target enables to
emit debuginfo for extern variables.
But if the extern variable has "void" type, the compilation will
fail.
-bash-4.4$ cat t.c
extern void bla;
void *test() {
void *x = &bla;
return x;
}
-bash-4.4$ clang -target bpf -g -O2 -S t.c
missing global variable type
!1 = distinct !DIGlobalVariable(name: "bla", scope: !2, file: !3, line: 1,
isLocal: false, isDefinition: false)
...
fatal error: error in backend: Broken module found, compilation aborted!
PLEASE submit a bug report to https://bugs.llvm.org/ and include the crash backtrace,
preprocessed source, and associated run script.
Stack dump:
...
The IR requires a DIGlobalVariable must have a valid type and the
"void" type does not generate any type, hence the above fatal error.
Note that if the extern variable is defined as "const void", the
compilation will succeed.
-bash-4.4$ cat t.c
extern const void bla;
const void *test() {
const void *x = &bla;
return x;
}
-bash-4.4$ clang -target bpf -g -O2 -S t.c
-bash-4.4$ cat t.ll
...
!1 = distinct !DIGlobalVariable(name: "bla", scope: !2, file: !3, line: 1,
type: !6, isLocal: false, isDefinition: false)
!6 = !DIDerivedType(tag: DW_TAG_const_type, baseType: null)
...
Since currently, "const void extern_var" is supported by the
debug info, it is natural that "void extern_var" should also
be supported. This patch disabled assertion of "void extern_var"
in IR verifier and add proper guarding when emiting potential
null debug info type to dwarf types.
Differential Revision: https://reviews.llvm.org/D81131
This patch upgrades DISubrange to support fortran requirements.
Summary:
Below are the updates/addition of fields.
lowerBound - Now accepts signed integer or DIVariable or DIExpression,
earlier it accepted only signed integer.
upperBound - This field is now added and accepts signed interger or
DIVariable or DIExpression.
stride - This field is now added and accepts signed interger or
DIVariable or DIExpression.
This is required to describe bounds of array which are known at runtime.
Testing:
unit test cases added (hand-written)
check clang
check llvm
check debug-info
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D80197
Summary:
A struct argument can be passed-by-value to a callee via a pointer to a
temporary stack copy. Add support for emitting an entry value DBG_VALUE
when an indirect parameter DBG_VALUE becomes unavailable. This is done
by omitting DW_OP_stack_value from the entry value expression, to make
the expression describe the location of an object.
rdar://63373691
Reviewers: djtodoro, aprantl, dstenb
Subscribers: hiraditya, lldb-commits, llvm-commits
Tags: #lldb, #llvm
Differential Revision: https://reviews.llvm.org/D80345
This patch adds support for DWARF attribute DW_AT_data_location.
Summary:
Dynamic arrays in fortran are described by array descriptor and
data allocation address. Former is mapped to DW_AT_location and
later is mapped to DW_AT_data_location.
Testing:
unit test cases added (hand-written)
check llvm
check debug-info
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D79592
Previously line table symbol was represented as `DIE::value_iterator`
inside `DwarfCompileUnit` and subsequent function `intStmtList`
was used to create a local `MCSymbol` to initialize it.
This patch removes `DIE::value_iterator` from `DwarfCompileUnit`
and intoduce `MCSymbol` for representing this units symbol for
`debug_line` section. As a result `applyStmtList` is also modified
to utilize this. Further more a helper function `getLineTableStartSym`
is also introduced to get this symbol, this would be used by clients
which need to access this line table, i.e `debug_macro`.
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D77489
Record the address of a tail-calling branch instruction within its call
site entry using DW_AT_call_pc. This allows a debugger to determine the
address to use when creating aritificial frames.
This creates an extra attribute + relocation at tail call sites, which
constitute 3-5% of all call sites in xnu/clang respectively.
rdar://60307600
Differential Revision: https://reviews.llvm.org/D76336
This is a revert-of-revert (i.e. this reverts commit 802bec89, which
itself reverted fa4701e1 and 79daafc9) with a fix folded in. The problem
was that call site tags weren't emitted properly when LTO was enabled
along with split-dwarf. This required a minor fix. I've added a reduced
test case in test/DebugInfo/X86/fission-call-site.ll.
Original commit message:
This allows a call site tag in CU A to reference a callee DIE in CU B
without resorting to creating an incomplete duplicate DIE for the callee
inside of CU A.
We already allow cross-CU references of subprogram declarations, so it
doesn't seem like definitions ought to be special.
This improves entry value evaluation and tail call frame synthesis in
the LTO setting. During LTO, it's common for cross-module inlining to
produce a call in some CU A where the callee resides in a different CU,
and there is no declaration subprogram for the callee anywhere. In this
case llvm would (unnecessarily, I think) emit an empty DW_TAG_subprogram
in order to fill in the call site tag. That empty 'definition' defeats
entry value evaluation etc., because the debugger can't figure out what
it means.
As a follow-up, maybe we could add a DWARF verifier check that a
DW_TAG_subprogram at least has a DW_AT_name attribute.
Update #1:
Reland with a fix to create a declaration DIE when the declaration is
missing from the CU's retainedTypes list. The declaration is left out
of the retainedTypes list in two cases:
1) Re-compiling pre-r266445 bitcode (in which declarations weren't added
to the retainedTypes list), and
2) Doing LTO function importing (which doesn't update the retainedTypes
list).
It's possible to handle (1) and (2) by modifying the retainedTypes list
(in AutoUpgrade, or in the LTO importing logic resp.), but I don't see
an advantage to doing it this way, as it would cause more DWARF to be
emitted compared to creating the declaration DIEs lazily.
Update #2:
Fold in a fix for call site tag emission in the split-dwarf + LTO case.
Tested with a stage2 ThinLTO+RelWithDebInfo build of clang, and with a
ReleaseLTO-g build of the test suite.
rdar://46577651, rdar://57855316, rdar://57840415, rdar://58888440
Differential Revision: https://reviews.llvm.org/D70350
... as well as:
Revert "[DWARF] Defer creating declaration DIEs until we prepare call site info"
This reverts commit fa4701e1979553c2df61698ac1ac212627630442.
This reverts commit 79daafc90308787b52a5d3a7586e82acd5e374b3.
There have been reports of this assert getting hit:
CalleeDIE && "Could not find DIE for call site entry origin
The low_pc is analog to the DW_AT_call_return_pc, since it describes
the return address after the call. The DW_AT_call_pc is the address
of the call instruction, and we don't use it at the moment.
Differential Revision: https://reviews.llvm.org/D73173
This makes the SectionLabel handling more resilient - specifically for
future PROPELLER work which will have more CU ranges (rather than just
one per function).
Ultimately it might be nice to make this more general/resilient to
arbitrary labels (rather than relying on the labels being created for CU
ranges & then being reused by ranges, loclists, and possibly other
addresses). It's possible that other (non-rnglist/loclist) uses of
addresses will need the addresses to be in SectionLabels earlier (eg:
move the CU.addRange to be done on function begin, rather than function
end, so during function emission they are already populated for other
use).
This change has 2 components:
Target-independent: add a method getDwarfFrameBase to TargetFrameLowering. It
describes how the Dwarf frame base will be encoded. That can be a register (the
default), the CFA (which replaces NVPTX-specific logic in DwarfCompileUnit), or
a DW_OP_WASM_location descriptr.
WebAssembly: Allow WebAssemblyFunctionInfo::getFrameRegister to return the
correct virtual register instead of FP32/SP32 after WebAssemblyReplacePhysRegs
has run. Make WebAssemblyExplicitLocals store the local it allocates for the
frame register. Use this local information to implement getDwarfFrameBase
The result is that the DW_AT_frame_base attribute is correctly encoded for each
subprogram, and each param and local variable has a correct DW_AT_location that
uses DW_OP_fbreg to refer to the frame base.
This is a reland of rG3a05c3969c18 with fixes for the expensive-checks
and Windows builds
Differential Revision: https://reviews.llvm.org/D71681
This change has 2 components:
Target-independent: add a method getDwarfFrameBase to TargetFrameLowering. It
describes how the Dwarf frame base will be encoded. That can be a register (the
default), the CFA (which replaces NVPTX-specific logic in DwarfCompileUnit), or
a DW_OP_WASM_location descriptr.
WebAssembly: Allow WebAssemblyFunctionInfo::getFrameRegister to return the
correct virtual register instead of FP32/SP32 after WebAssemblyReplacePhysRegs
has run. Make WebAssemblyExplicitLocals store the local it allocates for the
frame register. Use this local information to implement getDwarfFrameBase
The result is that the DW_AT_frame_base attribute is correctly encoded for each
subprogram, and each param and local variable has a correct DW_AT_location that
uses DW_OP_fbreg to refer to the frame base.
Differential Revision: https://reviews.llvm.org/D71681
This reverts D53469, which changed llvm's DWARF emission to emit
DW_AT_call_return_pc as a function-local offset. Such an encoding is not
compatible with post-link block re-ordering tools and isn't standards-
compliant.
In addition to reverting back to the original DW_AT_call_return_pc
encoding, teach lldb how to fix up DW_AT_call_return_pc when the address
comes from an object file pointed-to by a debug map. While doing this I
noticed that lldb's support for tail calls that cross a DSO/object file
boundary wasn't covered, so I added tests for that. This latter case
exercises the newly added return PC fixup.
The dsymutil changes in this patch were originally included in D49887:
the associated test should be sufficient to test DW_AT_call_return_pc
encoding purely on the llvm side.
Differential Revision: https://reviews.llvm.org/D72489
This allows a call site tag in CU A to reference a callee DIE in CU B
without resorting to creating an incomplete duplicate DIE for the callee
inside of CU A.
We already allow cross-CU references of subprogram declarations, so it
doesn't seem like definitions ought to be special.
This improves entry value evaluation and tail call frame synthesis in
the LTO setting. During LTO, it's common for cross-module inlining to
produce a call in some CU A where the callee resides in a different CU,
and there is no declaration subprogram for the callee anywhere. In this
case llvm would (unnecessarily, I think) emit an empty DW_TAG_subprogram
in order to fill in the call site tag. That empty 'definition' defeats
entry value evaluation etc., because the debugger can't figure out what
it means.
As a follow-up, maybe we could add a DWARF verifier check that a
DW_TAG_subprogram at least has a DW_AT_name attribute.
Update:
Reland with a fix to create a declaration DIE when the declaration is
missing from the CU's retainedTypes list. The declaration is left out
of the retainedTypes list in two cases:
1) Re-compiling pre-r266445 bitcode (in which declarations weren't added
to the retainedTypes list), and
2) Doing LTO function importing (which doesn't update the retainedTypes
list).
It's possible to handle (1) and (2) by modifying the retainedTypes list
(in AutoUpgrade, or in the LTO importing logic resp.), but I don't see
an advantage to doing it this way, as it would cause more DWARF to be
emitted compared to creating the declaration DIEs lazily.
Tested with a stage2 ThinLTO+RelWithDebInfo build of clang, and with a
ReleaseLTO-g build of the test suite.
rdar://46577651, rdar://57855316, rdar://57840415
Differential Revision: https://reviews.llvm.org/D70350
Move these data structures closer together so their emission code can
eventually share more of its implementation.
Was an egregious bug (completely untested, evidently) where I hadn't
inverted a DWARFv5 test as needed, so it was doing the exact opposite of
what was required & thus tried to emit a DWARFv5 range list header in
DWARFv4.
Reapply 8e04896288d22ed8bef7ac367923374f96b753d6 which was
reverted in a8154e5e0c83d2f0f65f3b4fb1a0bc68785bd975.
Summary:
Support alloca-referencing dbg.value in hwasan instrumentation.
Update AsmPrinter to emit DW_AT_LLVM_tag_offset when location is in
loclist format.
Reviewers: pcc
Subscribers: srhines, aprantl, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70753
This reverts commit 30038da15b18ac4e34b9ea7a648382ae481e4770. It causes
the stage2 thinLTO bot to fail with:
Assertion failed: (CU.getDIE(CalleeSP) && "Expected declaration subprogram DIE for callee")
rdar://57840415
This allows a call site tag in CU A to reference a callee DIE in CU B
without resorting to creating an incomplete duplicate DIE for the callee
inside of CU A.
We already allow cross-CU references of subprogram declarations, so it
doesn't seem like definitions ought to be special.
This improves entry value evaluation and tail call frame synthesis in
the LTO setting. During LTO, it's common for cross-module inlining to
produce a call in some CU A where the callee resides in a different CU,
and there is no declaration subprogram for the callee anywhere. In this
case llvm would (unnecessarily, I think) emit an empty DW_TAG_subprogram
in order to fill in the call site tag. That empty 'definition' defeats
entry value evaluation etc., because the debugger can't figure out what
it means.
As a follow-up, maybe we could add a DWARF verifier check that a
DW_TAG_subprogram at least has a DW_AT_name attribute.
rdar://46577651
Differential Revision: https://reviews.llvm.org/D70350
That patch fixes incompatible compilation unit type (DW_UT_skeleton) and root DIE (DW_TAG_compile_unit) error.
cat split-dwarf.cpp
int main()
{
int a = 1;
return 0;
}
clang++ -O -g -gsplit-dwarf -gdwarf-5 split-dwarf.cpp; llvm-dwarfdump --verify ./a.out | grep skeleton
error: Compilation unit type (DW_UT_skeleton) and root DIE (DW_TAG_compile_unit) do not match.
The fix is to change DW_TAG_compile_unit into DW_TAG_skeleton_unit when skeleton file is generated.
Differential Revision: https://reviews.llvm.org/D70880
This only implements the non-dwo part, but loclistx is necessary to use
location lists in DWARFv5, so it's a precursor to that work - and
generally reduces relocations (only using one reloc, then
indexes/relative offsets for all location list references) in non-split
DWARF.
Summary:
Internally in LLVM's metadata we use DW_OP_entry_value operations with
the same semantics as DWARF; that is, its operand specifies the number
of bytes that the entry value covers.
At the time of emitting entry values we don't know the emitted size of
the DWARF expression that the entry value will cover. Currently the size
is hardcoded to 1 in DIExpression, and other values causes the verifier
to fail. As the size is 1, that effectively means that we can only have
valid entry values for registers that can be encoded in one byte, which
are the registers with DWARF numbers 0 to 31 (as they can be encoded as
single-byte DW_OP_reg0..DW_OP_reg31 rather than a multi-byte
DW_OP_regx). It is a bit confusing, but it seems like llvm-dwarfdump
will print an operation "correctly", even if the byte size is less than
that, which may make it seem that we emit correct DWARF for registers
with DWARF numbers > 31. If you instead use readelf for such cases, it
will interpret the number of specified bytes as a DWARF expression. This
seems like a limitation in llvm-dwarfdump.
As suggested in D66746, a way forward would be to add an internal
variant of DW_OP_entry_value, DW_OP_LLVM_entry_value, whose operand
instead specifies the number of operations that the entry value covers,
and we then translate that into the byte size at the time of emission.
In this patch that internal operation is added. This patch keeps the
limitation that a entry value can only be applied to simple register
locations, but it will fix the issue with the size operand being
incorrect for DWARF numbers > 31.
Reviewers: aprantl, vsk, djtodoro, NikolaPrica
Reviewed By: aprantl
Subscribers: jyknight, fedor.sergeev, hiraditya, llvm-commits
Tags: #debug-info, #llvm
Differential Revision: https://reviews.llvm.org/D67492
llvm-svn: 374881
This is an effort to make RangeSpan and DebugLocStream::Entry more
similar to share code for their emission (to reuse the more complicated
code for using (& choosing when to use) base address selection entries,
etc).
It didn't seem like this struct was worth the complexity of
encapsulation - when the members could be initialized by the ctor to any
value (no validation) and the type is assignable (so there's no
mutability or other constraint being implemented by its interface).
llvm-svn: 373533
DIFlagBlockByRefStruct is an unused DIFlag that originally was used by
clang to express (Objective-)C block captures in debug info. For the
last year Clang has been emitting complex DIExpressions to describe
block captures instead, which makes all the code supporting this flag
redundant.
This patch removes the flag and all supporting "dead" code, so we can
reuse the bit for something else in the future.
Since this only affects debug info generated by Clang with the block
extension this mostly affects Apple platforms and I don't have any
bitcode compatibility concerns for removing this. The Verifier will
reject debug info that uses the bit and thus degrade gracefully when
LTO'ing older bitcode with a newer compiler.
rdar://problem/44304813
Differential Revision: https://reviews.llvm.org/D67453
llvm-svn: 372272
