Summary:
The existing implementation creates a symbolic SCEV expression every
time we analyze a phi node and then has to remove it, when the analysis
is finished. This is very expensive, and in most of the cases it's also
unnecessary. According to the data I collected, ~60-70% of analyzed phi
nodes (measured on SPEC) have the following form:
PN = phi(Start, OP(Self, Constant))
Handling such cases separately significantly speeds this up.
Reviewers: sanjoy, pete
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D32663
llvm-svn: 302096
Summary:
programUndefinedIfPoison makes more sense, given what the function
does; and I'm about to add a function with a name similar to
isKnownNotFullPoison (so do the rename to avoid confusion).
Reviewers: broune, majnemer, bjarke.roune
Reviewed By: broune
Subscribers: mcrosier, llvm-commits, mzolotukhin
Differential Revision: https://reviews.llvm.org/D30444
llvm-svn: 301776
This patch introduces a new KnownBits struct that wraps the two APInt used by computeKnownBits. This allows us to treat them as more of a unit.
Initially I've just altered the signatures of computeKnownBits and InstCombine's simplifyDemandedBits to pass a KnownBits reference instead of two separate APInt references. I'll do similar to the SelectionDAG version of computeKnownBits/simplifyDemandedBits as a separate patch.
I've added a constructor that allows initializing both APInts to the same bit width with a starting value of 0. This reduces the repeated pattern of initializing both APInts. Once place default constructed the APInts so I added a default constructor for those cases.
Going forward I would like to add more methods that will work on the pairs. For example trunc, zext, and sext occur on both APInts together in several places. We should probably add a clear method that can be used to clear both pieces. Maybe a method to check for conflicting information. A method to return (Zero|One) so we don't write it out everywhere. Maybe a method for (Zero|One).isAllOnesValue() to determine if all bits are known. I'm sure there are many other methods we can come up with.
Differential Revision: https://reviews.llvm.org/D32376
llvm-svn: 301432
This change reboots SCEV's current (off by default) verification logic
to avoid false failures. Instead of stringifying trip counts, it maps
old and new trip counts to the same ScalarEvolution "universe" and
asks ScalarEvolution to compute the difference between them. If the
difference comes out to be a non-zero constant, then (barring some
corner cases) we *know* we messed up.
I've not yet enabled this by default since it hits an exponential time
issue in SCEV, but once I fix that, I'll flip it on by default in
EXPENSIVE_CHECKS builds.
llvm-svn: 301146
There have been multiple reports of this causing problems: a
compile-time explosion on the LLVM testsuite, and a stack
overflow for an opencl kernel.
llvm-svn: 300928
getSignBit is a static function that creates an APInt with only the sign bit set. getSignMask seems like a better name to convey its functionality. In fact several places use it and then store in an APInt named SignMask.
Differential Revision: https://reviews.llvm.org/D32108
llvm-svn: 300856
Use haveNoCommonBitsSet to figure out whether an "or" instruction
is equivalent to addition. This handles more cases than just
checking for a constant on the RHS.
Differential Revision: https://reviews.llvm.org/D32239
llvm-svn: 300746
This patch uses lshrInPlace to replace code where the object that lshr is called on is being overwritten with the result.
This adds an lshrInPlace(const APInt &) version as well.
Differential Revision: https://reviews.llvm.org/D32155
llvm-svn: 300566
the exponential behavior.
The patch is to fix PR32043. Functions getZeroExtendExpr and getSignExtendExpr
may call themselves recursively more than once. This is potentially a 2^N
complexity behavior. The exponential behavior was not commonly exposed before
because of existing global cache mechnism like UniqueSCEVs or some early return
mechanism when flags FlagNSW or FlagNUW are seen. However, we still have case
which can expose the exponential behavior, like the case in PR32043, so we add
a local cache in getZeroExtendExpr and getSignExtendExpr. If the input of the
functions -- SCEV and type pair have been seen before, we can find the extended
expression directly in the local cache.
Differential Revision: https://reviews.llvm.org/D30350
llvm-svn: 300494
This moves the isMask and isShiftedMask functions to be class methods. They now use the MathExtras.h function for single word size and leading/trailing zeros/ones or countPopulation for the multiword size. The previous implementation made multiple temorary memory allocations to do the bitwise arithmetic operations to match the MathExtras.h implementation.
Differential Revision: https://reviews.llvm.org/D31565
llvm-svn: 299362
The patch rL298481 was reverted due to crash on clang-with-lto-ubuntu build.
The reason of the crash was type mismatch between either a or b and RHS in the following situation:
LHS = sext(a +nsw b) > RHS.
This is quite rare, but still possible situation. Normally we need to cast all {a, b, RHS} to their widest type.
But we try to avoid creation of new SCEV that are not constants to avoid initiating recursive analysis that
can take a lot of time and/or cache a bad value for iterations number. To deal with this, in this patch we
reject this case and will not try to analyze it if the type of sum doesn't match with the type of RHS. In this
situation we don't need to create any non-constant SCEVs.
This patch also adds an assertion to the method IsProvedViaContext so that we could fail on it and not
go further into range analysis etc (because in some situations these analyzes succeed even when the passed
arguments have wrong types, what should not normally happen).
The patch also contains a fix for a problem with too narrow scope of the analysis caused by wrong
usage of predicates in recursive invocations.
The regression test on the said failure: test/Analysis/ScalarEvolution/implied-via-addition.ll
Reviewers: reames, apilipenko, anna, sanjoy
Reviewed By: sanjoy
Subscribers: mzolotukhin, mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D31238
llvm-svn: 299205
The patch rL298481 was reverted due to crash on clang-with-lto-ubuntu build.
The reason of the crash was type mismatch between either a or b and RHS in the following situation:
LHS = sext(a +nsw b) > RHS.
This is quite rare, but still possible situation. Normally we need to cast all {a, b, RHS} to their widest type.
But we try to avoid creation of new SCEV that are not constants to avoid initiating recursive analysis that
can take a lot of time and/or cache a bad value for iterations number. To deal with this, in this patch we
reject this case and will not try to analyze it if the type of sum doesn't match with the type of RHS. In this
situation we don't need to create any non-constant SCEVs.
This patch also adds an assertion to the method IsProvedViaContext so that we could fail on it and not
go further into range analysis etc (because in some situations these analyzes succeed even when the passed
arguments have wrong types, what should not normally happen).
The patch also contains a fix for a problem with too narrow scope of the analysis caused by wrong
usage of predicates in recursive invocations.
The regression test on the said failure: test/Analysis/ScalarEvolution/implied-via-addition.ll
llvm-svn: 298690
Given below case:
%y = shl %x, n
%z = ashr %y, m
when n = m, SCEV models it as sext(trunc(x)). This patch tries to handle
the case where n > m by using sext(mul(trunc(x), 2^(n-m)))) as the SCEV
expression.
llvm-svn: 298631
This patch allows SCEV predicate analysis to prove implication of some expression predicates
from context predicates related to arguments of those expressions.
It introduces three new rules:
For addition:
(A >X && B >= 0) || (B >= 0 && A > X) ===> (A + B) > X.
For division:
(A > X) && (0 < B <= X + 1) ===> (A / B > 0).
(A > X) && (-B <= X < 0) ===> (A / B >= 0).
Using these rules, SCEV is able to prove facts like "if X > 1 then X / 2 > 0".
They can also be combined with the same context, to prove more complex expressions like
"if X > 1 then X/2 + 1 > 1".
Diffirential Revision: https://reviews.llvm.org/D30887
Reviewed by: sanjoy
llvm-svn: 298481
If loop bound containing calculations like min(a,b), the Scalar
Evolution API getSmallConstantTripMultiple returns 4294967295 "-1"
as the trip multiple. The problem is that, SCEV use -1 * umax to
represent umin. The multiple constant -1 was returned, and the logic
of guarding against huge trip counts was skipped. Because -1 has 32
active bits.
The fix attempt to factor more general cases. First try to get the
greatest power of two divisor of trip count expression. In case
overflow happens, the trip count expression is still divisible by the
greatest power of two divisor returned. Returns 1 if not divisible by 2.
Patch by Huihui Zhang <huihuiz@codeaurora.org>
Differential Revision: https://reviews.llvm.org/D30840
llvm-svn: 298301
Summary:
This approach has two major advantages over the existing one:
1. We don't need to extend bitwidth in our computations. Extending
bitwidth is a big issue for compile time as we often end up working with
APInts wider than 64bit, which is a slow case for APInt.
2. When we zero extend a wrapped range, we lose some information (we
replace the range with [0, 1 << src bit width)). Thus, avoiding such
extensions better preserves information.
Correctness testing:
I ran 'ninja check' with assertions that the new implementation of
getRangeForAffineAR gives the same results as the old one (this
functionality is not present in this patch). There were several failures
- I inspected them manually and found out that they all are caused by
the fact that we're returning more accurate results now (see bullet (2)
above).
Without such assertions 'ninja check' works just fine, as well as
SPEC2006.
Compile time testing:
CTMark/Os:
- mafft/pairlocalalign -16.98%
- tramp3d-v4/tramp3d-v4 -12.72%
- lencod/lencod -11.51%
- Bullet/bullet -4.36%
- ClamAV/clamscan -3.66%
- 7zip/7zip-benchmark -3.19%
- sqlite3/sqlite3 -2.95%
- SPASS/SPASS -2.74%
- Average -5.81%
Performance testing:
The changes are expected to be neutral for runtime performance.
Reviewers: sanjoy, atrick, pete
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D30477
llvm-svn: 297992
Fixes PR32142.
r287232 accidentally increased the recursion threshold for
CompareValueComplexity from 2 to 32. This change reverses that change
by introducing a separate flag for CompareValueComplexity's threshold.
llvm-svn: 296992
for a quite big function with source like
%add = add nsw i32 %mul, %conv
%mul1 = mul nsw i32 %add, %conv
%add2 = add nsw i32 %mul1, %add
%mul3 = mul nsw i32 %add2, %add
; repeat couple of thousands times
that can be produced by loop unroll, getAddExpr() tries to recursively construct SCEV and runs almost infinite time.
Added recursion depth restriction (with new parameter to set it)
Reviewers: sanjoy
Subscribers: hfinkel, llvm-commits, mzolotukhin
Differential Revision: https://reviews.llvm.org/D28158
llvm-svn: 294181
Make SolveLinEquationWithOverflow take the start as a SCEV, so we can
solve more cases. With that implemented, get rid of the special case
for powers of two.
The additional functionality probably isn't particularly useful,
but it might help a little for certain cases involving pointer
arithmetic.
Differential Revision: https://reviews.llvm.org/D28884
llvm-svn: 293576
We had various variants of defining dump() functions in LLVM. Normalize
them (this should just consistently implement the things discussed in
http://lists.llvm.org/pipermail/cfe-dev/2014-January/034323.html
For reference:
- Public headers should just declare the dump() method but not use
LLVM_DUMP_METHOD or #if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP)
- The definition of a dump method should look like this:
#if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP)
LLVM_DUMP_METHOD void MyClass::dump() {
// print stuff to dbgs()...
}
#endif
llvm-svn: 293359
Inlining in getAddExpr() can cause abnormal computational time in some cases.
New parameter -scev-addops-inline-threshold is intruduced with default value 500.
Reviewers: sanjoy
Subscribers: mzolotukhin, llvm-commits
Differential Revision: https://reviews.llvm.org/D28812
llvm-svn: 293176
To avoid regressions, make ScalarEvolution::createSCEV a bit more
clever.
Also get rid of some useless code in ScalarEvolution::howFarToZero
which was hiding this bug.
No new testcase because it's impossible to actually expose this bug:
we don't have any in-tree users of getUDivExactExpr besides the two
functions I just mentioned, and they both dodged the problem. I'll
try to add some interesting users in a followup.
Differential Revision: https://reviews.llvm.org/D28587
llvm-svn: 292449
- For a loop body with VERY complicated exit condition evaluation, constant
evolving may run out of stack on platforms such as Windows. Need to limit the
recursion depth.
Differential Revision: https://reviews.llvm.org/D28629
llvm-svn: 291927
Refines max backedge-taken count if a loop like
"for (int i = 0; i != n; ++i) { /* body */ }" is rotated.
Differential Revision: https://reviews.llvm.org/D28536
llvm-svn: 291704
This is both easier to understand, and produces a tighter bound in certain
cases.
Differential Revision: https://reviews.llvm.org/D28393
llvm-svn: 291701
invalid.
This fixes use-after-free bugs that will arise with any interesting use
of SCEV.
I've added a dedicated test that works diligently to trigger these kinds
of bugs in the new pass manager and also checks for them explicitly as
well as triggering ASan failures when things go squirly.
llvm-svn: 291426
Summary:
In getRangeForAffineAR we compute ranges for affine exprs E = A + B*C,
where ranges for A, B, and C are known. To avoid overflow, we need to
operate on a bigger bitwidth, and originally we chose 2*x+1 for this
(x being the original bitwidth). However, it is safe to use just 2*x:
A+B*C <= (2^x - 1) + (2^x - 1)*(2^x - 1) =
= 2^x - 1 + 2^2x - 2^x - 2^x + 1 =
= 2^2x - 2^x <= 2^2x - 1
Unnecessary extending of bitwidths results in noticeable slowdowns: ranges
perform arithmetic operations using APInt, which are much slower when bitwidths
are bigger than 64.
Reviewers: sanjoy, majnemer, chandlerc
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D27795
llvm-svn: 290211
Inserting a new key into a DenseMap potentially invalidates iterators into that
map. Trying to fix an issue from r289755 triggering this assertion:
Assertion `isHandleInSync() && "invalid iterator access!"' failed.
llvm-svn: 289757
