505 Commits

Author SHA1 Message Date
Jakob Stoklund Olesen
6be9354316 Add a FIXME.
TwoAddressInstructionPass should annotate instructions with <undef>
flags when it lower REG_SEQUENCE instructions.  LiveIntervals should not
be in the business of modifying code (except for kill flags, perhaps).

llvm-svn: 141187
2011-10-05 16:51:21 +00:00
Jakob Stoklund Olesen
a6045464c8 Allow <undef> flags on def operands as well as uses.
The <undef> flag says that a MachineOperand doesn't read its register,
or doesn't depend on the previous value of its register.

A full register def never depends on the previous register value.  A
partial register def may depend on the previous value if it is intended
to update part of a register.

For example:

  %vreg10:dsub_0<def,undef> = COPY %vreg1
  %vreg10:dsub_1<def> = COPY %vreg2

The first copy instruction defines the full %vreg10 register with the
bits not covered by dsub_0 defined as <undef>.  It is not considered a
read of %vreg10.

The second copy modifies part of %vreg10 while preserving the rest.  It
has an implicit read of %vreg10.

This patch adds a MachineOperand::readsReg() method to determine if an
operand reads its register.

Previously, this was modelled by adding a full-register <imp-def>
operand to the instruction.  This approach makes it possible to
determine directly from a MachineOperand if it reads its register.  No
scanning of MI operands is required.

llvm-svn: 141124
2011-10-04 21:49:33 +00:00
Jakob Stoklund Olesen
1c42989edf Speed up LiveIntervals::shrinkToUse with some caching.
Blocks with multiple PHI successors only need to go on the worklist
once.  Use a SmallPtrSet to track the live-out blocks that have already
been handled.  This is a lot faster than the two live range check we
would otherwise do.

Also stop recomputing hasPHIKill flags.  Like RenumberValues(), it is
conservatively correct to leave them in, and they are not used for
anything important.

llvm-svn: 139792
2011-09-15 15:24:16 +00:00
Jakob Stoklund Olesen
8e739db8a2 Switch extendInBlock() to take a kill slot instead of the last use slot.
Three out of four clients prefer this interface which is consistent with
extendIntervalEndTo() and LiveRangeCalc::extend().

llvm-svn: 139604
2011-09-13 16:47:56 +00:00
Jakob Stoklund Olesen
ffe1dbc840 When a physreg is live-in and live through a basic block, make sure its live
range covers the entire block.

The live range can't be terminated at a random instruction.

llvm-svn: 130619
2011-04-30 19:12:33 +00:00
Chris Lattner
0304b82f80 Fix a ton of comment typos found by codespell. Patch by
Luis Felipe Strano Moraes!

llvm-svn: 129558
2011-04-15 05:18:47 +00:00
Jakob Stoklund Olesen
d224a3530a Don't add live ranges for sub-registers when clobbering a physical register.
Both coalescing and register allocation already check aliases for interference,
so these extra segments are only slowing us down.

This speeds up both linear scan and the greedy register allocator.

llvm-svn: 129283
2011-04-11 18:08:10 +00:00
Jakob Stoklund Olesen
3e349f2950 Recompute hasPHIKill flags when shrinking live intervals.
PHI values may be deleted, causing the flags to be wrong. This fixes PR9616.

llvm-svn: 129092
2011-04-07 18:43:14 +00:00
Jakob Stoklund Olesen
1454095d5e Allow coalescing with reserved physregs in certain cases:
When a virtual register has a single value that is defined as a copy of a
reserved register, permit that copy to be joined. These virtual register are
usually copies of the stack pointer:

  %vreg75<def> = COPY %ESP; GR32:%vreg75
  MOV32mr %vreg75, 1, %noreg, 0, %noreg, %vreg74<kill>
  MOV32mi %vreg75, 1, %noreg, 8, %noreg, 0
  MOV32mi %vreg75<kill>, 1, %noreg, 4, %noreg, 0
  CALLpcrel32 ...

Coalescing these virtual registers early decreases register pressure.
Previously, they were coalesced by RALinScan::attemptTrivialCoalescing after
register allocation was completed.

The lower register pressure causes the mcinst-lowering-cmp0.ll test case to fail
because it depends on linear scan spilling a particular register.

I am deleting 2008-08-05-SpillerBug.ll because it is counting the number of
instructions emitted, and its revision history shows the 'correct' count being
edited many times.

llvm-svn: 128845
2011-04-04 21:00:03 +00:00
NAKAMURA Takumi
e0a71fb3e0 lib/CodeGen/LiveIntervalAnalysis.cpp: [PR9590] Don't use std::pow(float,float) here.
We don't expect the real "powf()" on some hosts (and powf() would be available on other hosts).
For consistency, std::pow(double,double) may be called instead.
Or, precision issue might attack us, to see unstable regalloc and stack coloring.

llvm-svn: 128629
2011-03-31 12:11:33 +00:00
Jakob Stoklund Olesen
2956265983 Accept instructions that read undefined values.
This is not supposed to happen, but I have seen the x86 rematter getting
confused when rematerializing partial redefs.

llvm-svn: 127857
2011-03-18 03:06:04 +00:00
Jakob Stoklund Olesen
047a25b0b0 Dead code elimination may separate the live interval into multiple connected components.
I have convinced myself that it can only happen when a phi value dies. When it
happens, allocate new virtual registers for the components.

llvm-svn: 127827
2011-03-17 20:37:07 +00:00
Jakob Stoklund Olesen
7b60f4161a Clarify debugging output.
llvm-svn: 127771
2011-03-16 22:56:08 +00:00
Jakob Stoklund Olesen
70541686bf Make SpillIs an optional pointer. Avoid creating a bunch of temporary SmallVectors.
llvm-svn: 127388
2011-03-10 01:21:58 +00:00
Jakob Stoklund Olesen
f9401745e0 Let shrinkToUses optionally return a list of now dead machine instructions.
llvm-svn: 127192
2011-03-07 23:29:10 +00:00
Jakob Stoklund Olesen
68b2c1d239 Handle the special case of registers begin redefined by early-clobber defs.
In this case, the value need to be available at the load index instead of the
normal use index.

llvm-svn: 127167
2011-03-07 18:56:16 +00:00
Jakob Stoklund Olesen
31949ff3f8 Fix PHI handling in LiveIntervals::shrinkToUses().
We need to wait until we meet a PHIDef in its defining block before resurrecting
PHIKills in the predecessors.

This should unbreak the llvm-gcc-build-x86_64-darwin10-x-mingw32-x-armeabi bot.

llvm-svn: 126905
2011-03-03 00:20:51 +00:00
Nick Lewycky
6ad594dd20 Quiet a compiler warning about unused variable 'ExtVNI'.
llvm-svn: 126815
2011-03-02 01:43:30 +00:00
Jakob Stoklund Olesen
200a74580c Simplify LiveIntervals::shrinkToUses() a bit by using the new extendInBlock().
llvm-svn: 126806
2011-03-02 00:33:03 +00:00
Jakob Stoklund Olesen
be281bb02c Fix typo.
llvm-svn: 126805
2011-03-02 00:33:01 +00:00
Jakob Stoklund Olesen
70f48f08c1 Move more fragments of spill weight calculation into CalcSpillWeights.h
Simplify the spill weight calculation a bit by bypassing
getApproximateInstructionCount() and using LiveInterval::getSize() directly.
This changes the computed spill weights, but only by a constant factor in each
function. It should not affect how spill weights compare against each other, and
so it shouldn't affect code generation.

llvm-svn: 125530
2011-02-14 23:15:38 +00:00
Jakob Stoklund Olesen
21624a745c Move calcLiveBlockInfo() and the BlockInfo struct into SplitAnalysis.
No functional changes intended.

llvm-svn: 125231
2011-02-09 22:50:26 +00:00
Jakob Stoklund Olesen
fe0a7ea3aa Add LiveIntervals::addKillFlags() to recompute kill flags after register allocation.
This is a lot easier than trying to get kill flags right during live range
splitting and rematerialization.

llvm-svn: 125113
2011-02-08 21:13:03 +00:00
Jakob Stoklund Olesen
a5e0ea6e4e Add LiveIntervals::shrinkToUses().
After uses of a live range are removed, recompute the live range to only cover
the remaining uses. This is necessary after rematerializing the value before
some (but not all) uses.

llvm-svn: 125058
2011-02-08 00:03:05 +00:00
Jakob Stoklund Olesen
b416dbf12e Apparently, it is possible for a block with a landing pad successor to have no calls.
In that case we simply ignore the landing pad and split live ranges before the
first terminator.

llvm-svn: 124907
2011-02-04 23:11:13 +00:00
Jakob Stoklund Olesen
bf833680ec Add LiveIntervals::getLastSplitPoint().
A live range cannot be split everywhere in a basic block. A split must go before
the first terminator, and if the variable is live into a landing pad, the split
must happen before the call that can throw.

llvm-svn: 124894
2011-02-04 19:33:11 +00:00
Jakob Stoklund Olesen
32f1783ca1 Simplify a bunch of isVirtualRegister() and isPhysicalRegister() logic.
These functions not longer assert when passed 0, but simply return false instead.

No functional change intended.

llvm-svn: 123155
2011-01-10 02:58:51 +00:00
Jakob Stoklund Olesen
ed53ab1635 Replace TargetRegisterInfo::printReg with a PrintReg class that also works without a TRI instance.
Print virtual registers numbered from 0 instead of the arbitrary
FirstVirtualRegister. The first virtual register is printed as %vreg0.
TRI::NoRegister is printed as %noreg.

llvm-svn: 123107
2011-01-09 03:05:53 +00:00
Jakob Stoklund Olesen
fb47e37338 Fix emergency spilling in LiveIntervals::spillPhysRegAroundRegDefsUses.
Always spill the full representative register at any point where any subregister
is live.

This fixes PR8620 which caused the old logic to get confused and not spill
anything at all.

The fundamental problem here is that the coalescer is too aggressive about
physical register coalescing. It sometimes makes it impossible to allocate
registers without these emergency spills.

llvm-svn: 119375
2010-11-16 19:55:14 +00:00
Jakob Stoklund Olesen
ea79975a68 Fix PR8612 in the standard spiller, take two.
The live range of a register defined by an early clobber starts at the use slot,
not the def slot.

Except when it is an early clobber tied to a use operand. Then it starts at the
def slot like a standard def.

llvm-svn: 119305
2010-11-16 00:40:59 +00:00
Jakob Stoklund Olesen
465c07cc66 Revert "Fix PR8612 in the standard spiller as well."
This reverts r119183 which borke the buildbots.

llvm-svn: 119270
2010-11-15 21:51:51 +00:00
Jakob Stoklund Olesen
920856ab38 Fix PR8612 in the standard spiller as well.
The live range of a register defined by an early clobber starts at the use slot,
not the def slot.

llvm-svn: 119183
2010-11-15 20:55:53 +00:00
Andrew Trick
9d60f59b55 RABasic is nearly functionally complete. There are a few remaining
benchmarks hitting an assertion.
Adds LiveIntervalUnion::collectInterferingVRegs.
Fixes "late spilling" by checking for any unspillable live vregs among
all physReg aliases.

llvm-svn: 118701
2010-11-10 19:18:47 +00:00
Jakob Stoklund Olesen
3a4c0c13eb Teach MachineBasicBlock::print() to annotate instructions and blocks with
SlotIndexes when available.

llvm-svn: 117392
2010-10-26 20:21:46 +00:00
Owen Anderson
63f757463c Begin adding static dependence information to passes, which will allow us to
perform initialization without static constructors AND without explicit initialization
by the client.  For the moment, passes are required to initialize both their
(potential) dependencies and any passes they preserve.  I hope to be able to relax
the latter requirement in the future.

llvm-svn: 116334
2010-10-12 19:48:12 +00:00
Jakob Stoklund Olesen
44943ef3f8 Replace FindLiveRangeContaining() with getVNInfoAt() in LiveIntervalAnalysis.
This helps hiding the LiveRange class which really should be private.

llvm-svn: 116244
2010-10-11 21:45:03 +00:00
Owen Anderson
69cbf2e8b7 Now with fewer extraneous semicolons!
llvm-svn: 115996
2010-10-07 22:25:06 +00:00
Lang Hames
fb22f00975 Removed VNInfo::isDefAccurate(). Def "accuracy" can be checked by testing whether LiveIntervals::getInstructionFromIndex(def) returns NULL.
llvm-svn: 114791
2010-09-25 12:04:16 +00:00
Jakob Stoklund Olesen
af7994784c Remove SlotIndex::PHI_BIT. It is no longer used by anything.
llvm-svn: 114779
2010-09-25 00:45:18 +00:00
Evan Cheng
aea9870136 PHI elimination shouldn't require machineloopinfo since it's used at -O0. Move the requirement to LiveIntervalAnalysis instead. Note this does not change the number of times machineloopinfo is computed.
llvm-svn: 111285
2010-08-17 21:00:37 +00:00
Jakob Stoklund Olesen
cbb21e8c0e Remove trailing whitespace.
llvm-svn: 110944
2010-08-12 20:01:23 +00:00
Jakob Stoklund Olesen
38a3f83da5 Oops. Don't normalize spill weights twice.
When the normalizeSpillWeights function was introduced, I forgot to remove this
normalization.

This change could affect register allocation. Hopefully for the better.

llvm-svn: 110119
2010-08-03 17:21:16 +00:00
Owen Anderson
f8addbb0a1 Fix batch of converting RegisterPass<> to INTIALIZE_PASS().
llvm-svn: 109045
2010-07-21 22:09:45 +00:00
Jakob Stoklund Olesen
bcee53a2b8 Remove many calls to TII::isMoveInstr. Targets should be producing COPY anyway.
TII::isMoveInstr is going tobe completely removed.

llvm-svn: 108507
2010-07-16 04:45:42 +00:00
Jakob Stoklund Olesen
c90bfdd01f Fix small bug in isMoveInstr -> COPY translation
llvm-svn: 108013
2010-07-09 20:55:49 +00:00
Jakob Stoklund Olesen
ccd252ca08 Change TII::foldMemoryOperand API to require the machine instruction to be
inserted in a MBB, and return an already inserted MI.

This target API change is necessary to allow foldMemoryOperand to call
storeToStackSlot and loadFromStackSlot when folding a COPY to a stack slot
reference in a target independent way.

The foldMemoryOperandImpl hook is going to change in the same way, but I'll wait
until COPY folding is actually implemented. Most targets only fold copies and
won't need to specialize this hook at all.

llvm-svn: 107991
2010-07-09 17:29:08 +00:00
Jakob Stoklund Olesen
30aacf68b9 Convert EXTRACT_SUBREG to COPY when emitting machine instrs.
EXTRACT_SUBREG no longer appears as a machine instruction. Use COPY instead.

Add isCopy() checks in many places using isMoveInstr() and isExtractSubreg().
The isMoveInstr hook will be removed later.

llvm-svn: 107879
2010-07-08 16:40:22 +00:00
Jakob Stoklund Olesen
8983ea915c Remove references to INSERT_SUBREG after de-SSA.
Fix X86InstrInfo::convertToThreeAddressWithLEA to generate COPY instead of
INSERT_SUBREG.

llvm-svn: 107878
2010-07-08 16:40:15 +00:00
Jakob Stoklund Olesen
3f4e5779d7 Revert "Remove references to INSERT_SUBREG after de-SSA" r107725.
Buildbot breakage.

llvm-svn: 107744
2010-07-07 00:32:25 +00:00
Jakob Stoklund Olesen
04124836b5 Remove references to INSERT_SUBREG after de-SSA
llvm-svn: 107732
2010-07-06 23:40:35 +00:00