SimplifyCFG had logic to insert calls to llvm.trap for two very
particular IR patterns: stores and invokes of undef/null.
While InstCombine canonicalizes certain undefined behavior IR patterns
to stores of undef, phase ordering means that this cannot be relied upon
in general.
There are much better tools than llvm.trap: UBSan and ASan.
N.B. I could be argued into reverting this change if a clear argument as
to why it is important that we synthesize llvm.trap for stores, I'd be
hard pressed to see why it'd be useful for invokes...
llvm-svn: 273778
reduce the number of comparisons.
Specifically, InstCombine can turn:
(i == 5334 || i == 5335)
into:
((i | 1) == 5335)
SimplifyCFG was already able to detect the pattern:
(i == 5334 || i == 5335)
to:
((i & -2) == 5334)
This patch supersedes D21315 and resolves PR27555
(https://llvm.org/bugs/show_bug.cgi?id=27555).
Thanks to David and Chandler for the suggestions!
Author: Thomas Jablin (tjablin)
Reviewers: majnemer chandlerc halfdan cycheng
http://reviews.llvm.org/D21397
llvm-svn: 273639
(i == 5334 || i == 5335)
to:
((i & -2) == 5334)
This transformation has some incorrect side conditions. Specifically, the
transformation is only applied when the right-hand side constant (5334 in
the example) is a power of two not equal and not equal to the negated mask.
These side conditions were added in r258904 to fix PR26323. The correct side
condition is that: ((Constant & Mask) == Constant)[(5334 & -2) == 5334].
It's a little bit hard to see why these transformations are correct and what
the side conditions ought to be. Here is a CVC3 program to verify them for
64-bit values:
ONE : BITVECTOR(64) = BVZEROEXTEND(0bin1, 63);
x : BITVECTOR(64);
y : BITVECTOR(64);
z : BITVECTOR(64);
mask : BITVECTOR(64) = BVSHL(ONE, z);
QUERY( (y & ~mask = y) =>
((x & ~mask = y) <=> (x = y OR x = (y | mask)))
);
Please note that each pattern must be a dual implication (<--> or iff). One
directional implication can create spurious matches. If the implication is
only one-way, an unsatisfiable condition on the left side can imply a
satisfiable condition on the right side. Dual implication ensures that
satisfiable conditions are transformed to other satisfiable conditions and
unsatisfiable conditions are transformed to other unsatisfiable conditions.
Here is a concrete example of a unsatisfiable condition on the left
implying a satisfiable condition on the right:
mask = (1 << z)
(x & ~mask) == y --> (x == y || x == (y | mask))
Substituting y = 3, z = 0 yields:
(x & -2) == 3 --> (x == 3 || x == 2)
The version of this code before r258904 had no side-conditions and
incorrectly justified itself in comments through one-directional
implication.
Thanks to Chandler for the suggestion!
Author: Thomas Jablin (tjablin)
Reviewers: chandlerc majnemer hfinkel cycheng
http://reviews.llvm.org/D21417
llvm-svn: 272873
A basic block could contain:
%cp = cleanuppad []
cleanupret from %cp unwind to caller
This basic block is empty and is thus a candidate for removal. However,
there can be other uses of %cp outside of this basic block. This is
only possible in unreachable blocks.
Make our transform more correct by checking that the pad has a single
user before removing the BB.
This fixes PR28005.
llvm-svn: 271816
A cleanuppad is not cheap, they turn into many instructions and result
in additional spills and fills. It is not worth keeping a cleanuppad
around if all it does is hold a lifetime.end instruction.
N.B. We first try to merge the cleanuppad with another cleanuppad to
avoid dropping the lifetime and debug info markers.
llvm-svn: 270314
Summary: Set default branch weight to 1:1 if one of the branch has profile missing when simplifying CFG.
Reviewers: spatel, davidxl
Subscribers: danielcdh, llvm-commits
Differential Revision: http://reviews.llvm.org/D20307
llvm-svn: 269995
Summary: In sample profile, some branches may have profile missing due to profile inaccuracy. We want existing branch probability still valid after propagation.
Reviewers: hfinkel, davidxl, spatel
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D19948
llvm-svn: 269137
Retrying r268550/r268751 which were reverted at r268577/r268765 due a memory sanitizer failure.
I have not been able to reproduce that failure, but I've taken another guess at fixing
the problem in this version of the patch and will watch for another failure.
Original commit message:
Unlike earlier similar fixes, we need to recalculate the branch weights
in this case.
Differential Revision: http://reviews.llvm.org/D19674
llvm-svn: 268767
Retrying r268550 which was reverted at r268577 due a memory sanitizer failure.
I have not been able to reproduce that failure, but I've taken a guess at fixing
the problem in this version of the patch and will watch for another failure.
Original commit message:
Unlike earlier similar fixes, we need to recalculate the branch weights
in this case.
Differential Revision: http://reviews.llvm.org/D19674
llvm-svn: 268751
MemorySanitizer: use-of-uninitialized-value
0x4910e47 in count /mnt/b/sanitizer-buildbot2/sanitizer-x86_64-linux-bootstrap/build/llvm/include/llvm/Support/MathExtras.h:159:12
0x4910e47 in countLeadingZeros<unsigned long> /mnt/b/sanitizer-buildbot2/sanitizer-x86_64-linux-bootstrap/build/llvm/include/llvm/Support/MathExtras.h:183
0x4910e47 in FitWeights /mnt/b/sanitizer-buildbot2/sanitizer-x86_64-linux-bootstrap/build/llvm/lib/Transforms/Utils/SimplifyCFG.cpp:855
0x4910e47 in SimplifyCondBranchToCondBranch /mnt/b/sanitizer-buildbot2/sanitizer-x86_64-linux-bootstrap/build/llvm/lib/Transforms/Utils/SimplifyCFG.cpp:2895
This reverts commit 609f4dd4bf3bc735c8c047a4d4b0a8e9e4d202e2.
llvm-svn: 268577
Unlike earlier similar fixes, we need to recalculate the branch weights
in this case.
Differential Revision: http://reviews.llvm.org/D19674
llvm-svn: 268550
This patch fixes PR27615.
@llvm.dbg.value instructions no longer count towards the maximum number of
instructions to look back at in the instruction list when searching for a
store instruction. This should make the output consistent between debug and
non-debug build.
Patch by Henric Karlsson <henric.karlsson@ericsson.com>!
Differential Revision: http://reviews.llvm.org/D19912
llvm-svn: 268512
Make it possible that TryToSimplifyUncondBranchFromEmptyBlock merges empty
basic block including lifetime intrinsics as well as phi nodes and
unconditional branch into its successor or predecessor(s).
If successor of empty block has single predecessor, all contents including
lifetime intrinsics are sinked into the successor. Otherwise, they are
hoisted into its predecessor(s) and then merged into the predecessor(s).
Patch by Josh Yoon <josh.yoon@samsung.com>!
Differential Revision: http://reviews.llvm.org/D19257
llvm-svn: 268254
When SimplifyCFG merges identical instructions from both sides of a diamond, it
can preserve !llvm.mem.parallel_loop_access (as it does with most of the other
metadata). There's no real data or control dependency change in this case.
llvm-svn: 267515
Summary: eq imply [u|s]ge and [u|s]le are true.
Remove redundant logic by implementing isImpliedFalseByMatchingCmp(Pred1, Pred2)
as isImpliedTrueByMatchingCmp(Pred1, getInversePredicate(Pred2)).
llvm-svn: 267177
Summary: [u|s]gt and [u|s]lt imply [u|s]ge and [u|s]le are true, respectively.
I've simplified the existing tests and added additional tests to cover the new
cases mentioned above. I've also added tests for all the cases where the
first compare doesn't imply anything about the second compare.
llvm-svn: 267171
A followup commit will replace these tests with simplified and more inclusive
tests. The diff is unreadable if this were to be done in a single commit.
llvm-svn: 267170
Summary:
`llvm.guard(false)` always bails out of the current compilation unit, so
we can prune any control flow following it.
Reviewers: hfinkel, pcc, reames
Subscribers: majnemer, reames, mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D19245
llvm-svn: 266955
This patch improves SimplifyCFG to catch cases like:
if (a < b) {
if (a > b) <- known to be false
unreachable;
}
Phabricator Revision: http://reviews.llvm.org/D18905
llvm-svn: 266767
Currently each Function points to a DISubprogram and DISubprogram has a
scope field. For member functions the scope is a DICompositeType. DIScopes
point to the DICompileUnit to facilitate type uniquing.
Distinct DISubprograms (with isDefinition: true) are not part of the type
hierarchy and cannot be uniqued. This change removes the subprograms
list from DICompileUnit and instead adds a pointer to the owning compile
unit to distinct DISubprograms. This would make it easy for ThinLTO to
strip unneeded DISubprograms and their transitively referenced debug info.
Motivation
----------
Materializing DISubprograms is currently the most expensive operation when
doing a ThinLTO build of clang.
We want the DISubprogram to be stored in a separate Bitcode block (or the
same block as the function body) so we can avoid having to expensively
deserialize all DISubprograms together with the global metadata. If a
function has been inlined into another subprogram we need to store a
reference the block containing the inlined subprogram.
Attached to https://llvm.org/bugs/show_bug.cgi?id=27284 is a python script
that updates LLVM IR testcases to the new format.
http://reviews.llvm.org/D19034
<rdar://problem/25256815>
llvm-svn: 266446
This is almost identical to:
http://reviews.llvm.org/rL264527
This doesn't solve PR27344; it just allows the profile weights to survive.
To solve the bug, we need to use the profile weights in the backend.
llvm-svn: 266442
This mostly cosmetic patch moves the DebugEmissionKind enum from DIBuilder
into DICompileUnit. DIBuilder is not the right place for this enum to live
in — a metadata consumer should not have to include DIBuilder.h.
I also added a Verifier check that checks that the emission kind of a
DICompileUnit is actually legal.
http://reviews.llvm.org/D18612
<rdar://problem/25427165>
llvm-svn: 265077
When eliminating or merging almost empty basic blocks, the existence of non-trivial PHI nodes
is currently used to recognize potential loops of which the block is the header and keep the block.
However, the current algorithm fails if the loops' exit condition is evaluated only with volatile
values hence no PHI nodes in the header. Especially when such a loop is an outer loop of a nested
loop, the loop is collapsed into a single loop which prevent later optimizations from being
applied (e.g., transforming nested loops into simplified forms and loop vectorization).
The patch augments the existing PHI node-based check by adding a pre-test if the BB actually
belongs to a set of loop headers and not eliminating it if yes.
llvm-svn: 264697
When eliminating or merging almost empty basic blocks, the existence of non-trivial PHI nodes
is currently used to recognize potential loops of which the block is the header and keep the block.
However, the current algorithm fails if the loops' exit condition is evaluated only with volatile
values hence no PHI nodes in the header. Especially when such a loop is an outer loop of a nested
loop, the loop is collapsed into a single loop which prevent later optimizations from being
applied (e.g., transforming nested loops into simplified forms and loop vectorization).
The patch augments the existing PHI node-based check by adding a pre-test if the BB actually
belongs to a set of loop headers and not eliminating it if yes.
llvm-svn: 264596
