Target specific types should not be vectorized. As a practical matter,
these types are already register matched (at least in the x86 case),
and codegen does not always work correctly (at least in the ppc case,
and this is not worth fixing because ppc_fp128 is currently broken and
will probably go away soon).
llvm-svn: 155729
instead of getAggregateElement. This has the advantage of being
more consistent and allowing higher-level constant folding to
procede even if an inner extract element cannot be folded.
Make ConstantFoldInstruction call ConstantFoldConstantExpression
on the instruction's operands, making it more consistent with
ConstantFoldConstantExpression itself. This makes sure that
ConstantExprs get TargetData-aware folding before being handed
off as operands for further folding.
This causes more expressions to be folded, but due to a known
shortcoming in constant folding, this currently has the side effect
of stripping a few more nuw and inbounds flags in the non-targetdata
side of constant-fold-gep.ll. This is mostly harmless.
This fixes rdar://11324230.
llvm-svn: 155682
elements to minimize the number of multiplies required to compute the
final result. This uses a heuristic to attempt to form near-optimal
binary exponentiation-style multiply chains. While there are some cases
it misses, it seems to at least a decent job on a very diverse range of
inputs.
Initial benchmarks show no interesting regressions, and an 8%
improvement on SPASS. Let me know if any other interesting results (in
either direction) crop up!
Credit to Richard Smith for the core algorithm, and helping code the
patch itself.
llvm-svn: 155616
constants in C++11 mode. I have no idea why it required such particular
circumstances to get here, the code seems clearly to rely upon unchecked
assumptions.
Specifically, when we decide to form an index into a struct type, we may
have gone through (at least one) zero-length array indexing round, which
would have left the offset un-adjusted, and thus not necessarily valid
for use when indexing the struct type.
This is just an canonicalization step, so the correct thing is to refuse
to canonicalize nonsensical GEPs of this form. Implemented, and test
case added.
Fixes PR12642. Pair debugged and coded with Richard Smith. =] I credit
him with most of the debugging, and preventing me from writing the wrong
code.
llvm-svn: 155466
Original commit message:
Defer some shl transforms to DAGCombine.
The shl instruction is used to represent multiplication by a constant
power of two as well as bitwise left shifts. Some InstCombine
transformations would turn an shl instruction into a bit mask operation,
making it difficult for later analysis passes to recognize the
constsnt multiplication.
Disable those shl transformations, deferring them to DAGCombine time.
An 'shl X, C' instruction is now treated mostly the same was as 'mul X, C'.
These transformations are deferred:
(X >>? C) << C --> X & (-1 << C) (When X >> C has multiple uses)
(X >>? C1) << C2 --> X << (C2-C1) & (-1 << C2) (When C2 > C1)
(X >>? C1) << C2 --> X >>? (C1-C2) & (-1 << C2) (When C1 > C2)
The corresponding exact transformations are preserved, just like
div-exact + mul:
(X >>?,exact C) << C --> X
(X >>?,exact C1) << C2 --> X << (C2-C1)
(X >>?,exact C1) << C2 --> X >>?,exact (C1-C2)
The disabled transformations could also prevent the instruction selector
from recognizing rotate patterns in hash functions and cryptographic
primitives. I have a test case for that, but it is too fragile.
llvm-svn: 155362
1) Make the checked assertions a bit more precise. We really want the
canonical forms coming out of reassociate to be exactly what is
expected.
2) Remove other passes, and switch the test to actually directly check
that reassociate makes the important transforms and
canonicalizations.
3) Fold in a related test case now that we're using FileCheck. Make the
same tidying changes to it.
llvm-svn: 155311
While the patch was perfect and defect free, it exposed a really nasty
bug in X86 SelectionDAG that caused an llc crash when compiling lencod.
I'll put the patch back in after fixing the SelectionDAG problem.
llvm-svn: 155181
The shl instruction is used to represent multiplication by a constant
power of two as well as bitwise left shifts. Some InstCombine
transformations would turn an shl instruction into a bit mask operation,
making it difficult for later analysis passes to recognize the
constsnt multiplication.
Disable those shl transformations, deferring them to DAGCombine time.
An 'shl X, C' instruction is now treated mostly the same was as 'mul X, C'.
These transformations are deferred:
(X >>? C) << C --> X & (-1 << C) (When X >> C has multiple uses)
(X >>? C1) << C2 --> X << (C2-C1) & (-1 << C2) (When C2 > C1)
(X >>? C1) << C2 --> X >>? (C1-C2) & (-1 << C2) (When C1 > C2)
The corresponding exact transformations are preserved, just like
div-exact + mul:
(X >>?,exact C) << C --> X
(X >>?,exact C1) << C2 --> X << (C2-C1)
(X >>?,exact C1) << C2 --> X >>?,exact (C1-C2)
The disabled transformations could also prevent the instruction selector
from recognizing rotate patterns in hash functions and cryptographic
primitives. I have a test case for that, but it is too fragile.
llvm-svn: 155136
This is mostly to test the waters. I'd like to get results from FNT
build bots and other bots running on non-x86 platforms.
This feature has been pretty heavily tested over the last few months by
me, and it fixes several of the execution time regressions caused by the
inlining work by preventing inlining decisions from radically impacting
block layout.
I've seen very large improvements in yacr2 and ackermann benchmarks,
along with the expected noise across all of the benchmark suite whenever
code layout changes. I've analyzed all of the regressions and fixed
them, or found them to be impossible to fix. See my email to llvmdev for
more details.
I'd like for this to be in 3.1 as it complements the inliner changes,
but if any failures are showing up or anyone has concerns, it is just
a flag flip and so can be easily turned off.
I'm switching it on tonight to try and get at least one run through
various folks' performance suites in case SPEC or something else has
serious issues with it. I'll watch bots and revert if anything shows up.
llvm-svn: 154816
When vectorizing pointer types it is important to realize that potential
pairs cannot be connected via the address pointer argument of a load or store.
This is because even after vectorization, the address is still a scalar because
the address of the higher half of the pair is implicit from the address of the
lower half (it need not be, and should not be, explicitly computed).
llvm-svn: 154735
Take this opportunity to generalize the indirectbr bailout logic for
loop transformations. CFG transformations will never get indirectbr
right, and there's no point trying.
llvm-svn: 154386
GEPs, bit casts, and stores reaching it but no other instructions. These
often show up during the iterative processing of the inliner, SROA, and
DCE. Once we hit this point, we can completely remove the alloca. These
were actually showing up in the final, fully optimized code in a bunch
of inliner tests I've been working on, and notably they show up after
LLVM finishes optimizing away all function calls involved in
hash_combine(a, b).
llvm-svn: 154285
speculate. Without this, loop rotate (among many other places) would
suddenly stop working in the presence of debug info. I found this
looking at loop rotate, and have augmented its tests with a reduction
out of a very hot loop in yacr2 where failing to do this rotation costs
sometimes more than 10% in runtime performance, perturbing numerous
downstream optimizations.
This should have no impact on performance without debug info, but the
change in performance when debug info is enabled can be extreme. As
a consequence (and this how I got to this yak) any profiling of
performance problems should be treated with deep suspicion -- they may
have been wildly innacurate of debug info was enabled for profiling. =/
Just a heads up.
llvm-svn: 154263
simplification has been performed. This is a bit less efficient
(requires another ilist walk of the basic blocks) but shouldn't matter
in practice. More importantly, it's just too much work to keep track of
all the various ways the return instructions can be mutated while
simplifying them. This fixes yet another crasher, reported by Daniel
Dunbar.
llvm-svn: 154179
dead code, including dead return instructions in some cases. Otherwise,
we end up having a bogus poniter to a return instruction that blows up
much further down the road.
It turns out that this pattern is both simpler to code, easier to update
in the face of enhancements to the inliner cleanup, and likely cheaper
given that it won't add dead instructions to the list.
Thanks to John Regehr's numerous test cases for teasing this out.
llvm-svn: 154157
This allows us to keep passing reduced masks to SimplifyDemandedBits, but
know about all the bits if SimplifyDemandedBits fails. This allows instcombine
to simplify cases like the one in the included testcase.
llvm-svn: 154011
http://llvm.org/bugs/show_bug.cgi?id=12343
We have not trivial way for splitting edges that are goes from indirect branch. We can do it with some tricks, but it should be additionally discussed. And it is still dangerous due to difficulty of indirect branches controlling.
Fix forbids this case for unswitching.
llvm-svn: 153879
a single missing character. Somehow, this had gone untested. I've added
tests for returns-twice logic specifically with the always-inliner that
would have caught this, and fixed the bug.
Thanks to Matt for the careful review and spotting this!!! =D
llvm-svn: 153832
on a per-callsite walk of the called function's instructions, in
breadth-first order over the potentially reachable set of basic blocks.
This is a major shift in how inline cost analysis works to improve the
accuracy and rationality of inlining decisions. A brief outline of the
algorithm this moves to:
- Build a simplification mapping based on the callsite arguments to the
function arguments.
- Push the entry block onto a worklist of potentially-live basic blocks.
- Pop the first block off of the *front* of the worklist (for
breadth-first ordering) and walk its instructions using a custom
InstVisitor.
- For each instruction's operands, re-map them based on the
simplification mappings available for the given callsite.
- Compute any simplification possible of the instruction after
re-mapping, and store that back int othe simplification mapping.
- Compute any bonuses, costs, or other impacts of the instruction on the
cost metric.
- When the terminator is reached, replace any conditional value in the
terminator with any simplifications from the mapping we have, and add
any successors which are not proven to be dead from these
simplifications to the worklist.
- Pop the next block off of the front of the worklist, and repeat.
- As soon as the cost of inlining exceeds the threshold for the
callsite, stop analyzing the function in order to bound cost.
The primary goal of this algorithm is to perfectly handle dead code
paths. We do not want any code in trivially dead code paths to impact
inlining decisions. The previous metric was *extremely* flawed here, and
would always subtract the average cost of two successors of
a conditional branch when it was proven to become an unconditional
branch at the callsite. There was no handling of wildly different costs
between the two successors, which would cause inlining when the path
actually taken was too large, and no inlining when the path actually
taken was trivially simple. There was also no handling of the code
*path*, only the immediate successors. These problems vanish completely
now. See the added regression tests for the shiny new features -- we
skip recursive function calls, SROA-killing instructions, and high cost
complex CFG structures when dead at the callsite being analyzed.
Switching to this algorithm required refactoring the inline cost
interface to accept the actual threshold rather than simply returning
a single cost. The resulting interface is pretty bad, and I'm planning
to do lots of interface cleanup after this patch.
Several other refactorings fell out of this, but I've tried to minimize
them for this patch. =/ There is still more cleanup that can be done
here. Please point out anything that you see in review.
I've worked really hard to try to mirror at least the spirit of all of
the previous heuristics in the new model. It's not clear that they are
all correct any more, but I wanted to minimize the change in this single
patch, it's already a bit ridiculous. One heuristic that is *not* yet
mirrored is to allow inlining of functions with a dynamic alloca *if*
the caller has a dynamic alloca. I will add this back, but I think the
most reasonable way requires changes to the inliner itself rather than
just the cost metric, and so I've deferred this for a subsequent patch.
The test case is XFAIL-ed until then.
As mentioned in the review mail, this seems to make Clang run about 1%
to 2% faster in -O0, but makes its binary size grow by just under 4%.
I've looked into the 4% growth, and it can be fixed, but requires
changes to other parts of the inliner.
llvm-svn: 153812
The powi intrinsic requires special handling because it always takes a single
integer power regardless of the result type. As a result, we can vectorize
only if the powers are equal. Fixes PR12364.
llvm-svn: 153797
CodeGenPrepare sinks compare instructions down to their uses to prevent
live flags and predicate registers across basic blocks.
PRE of a compare instruction prevents that, forcing the i1 compare
result into a general purpose register. That is usually more expensive
than the redundant compare PRE was trying to eliminate in the first
place.
llvm-svn: 153657
Original commit message for r153521 (aka r153423):
Use the new range metadata in computeMaskedBits and add a new optimization to
instruction simplify that lets us remove an and when loding a boolean value.
llvm-svn: 153587
