When libc++ is used to build LLVM libraries, these libraries have dependencies on libc++ and C++ STL signatures in these libraries are corresponding to libc++ implementation. Therefore, -stdlib=libc++ is required on the C++ compiler command for building GO tests that link with these LLVM libraries.
Reviewers: hubert.reinterpretcast, sfertile, amyk, EricWF
Reviewed By: sfertile, hubert.reinterpretcast
Subscribers: jsji, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61900
llvm-svn: 360895
r360876 didn't fix 2 call sites in clang.
Expected<ArrayRef<uint8_t>> may be better but use Expected<StringRef> for now.
Follow-up of D61781.
llvm-svn: 360892
It broke the Clang build, see llvm-commits thread.
> Expected<ArrayRef<uint8_t>> may be better but use Expected<StringRef> for now.
>
> Follow-up of D61781.
llvm-svn: 360878
In the r360676 "Apply clang format. NFC" I applied clang-format
for whole ELFDumper.cpp. It caused a little discussion,
one of the points mentioned was that previously nicely lined up
tables are not so nice now.
This patch reverts them.
llvm-svn: 360860
This adds support for the arm64_32 watchOS ABI to LLVM's low level tools,
teaching them about the specific MachO choices and constants needed to
disassemble things.
llvm-svn: 360663
.gnu_debuglink section contains information regarding file with
debugging symbols, identified by its CRC32. This target file is not
intended to ever change or it would invalidate the stored checksum, yet
the checksum is calculated over and over again for each of the objects
inside the archive, usually hundreds of times.
This patch precomputes the CRC32 of the target once and then reuses the
value where required, saving lots of redundant I/O.
The error message reported should stay the same, although now it might
be reported earlier.
Reviewed by: jhenderson, jakehehrlich, MaskRay
Differential Revision: https://reviews.llvm.org/D61343
Patch by Michal Janiszewski
llvm-svn: 360661
Change
std::error_code getSectionContents(DataRefImpl, StringRef &) const;
to
Expected<ArrayRef<uint8_t>> getSectionContents(DataRefImpl) const;
Many object formats use ArrayRef<uint8_t> as the underlying type, which
is generally better than StringRef to represent binary data, so change
the type to decrease the number of type conversions.
Reviewed By: ruiu, sbc100
Differential Revision: https://reviews.llvm.org/D61781
llvm-svn: 360648
Also updates RuntimeDyldChecker and llvm-rtdyld to support zero-fill tests by
returning a content address of zero (but no error) for zero-fill atoms, and
treating loads from zero as returning zero.
llvm-svn: 360547
Add support for ".hidden" ".internal" ".protected" and " 0x%02x" for
other st_other bits used by some architectures.
Reviewed By: sfertile
Differential Revision: https://reviews.llvm.org/D61718
llvm-svn: 360439
Add check for, and parsing of, .dwo files to Statistics.cpp; create a new getNon
SkeletonUnitDie function for DWARFUnit.h
Reviewers: dblaikie
Differential Revision: https://review.llvm.org/D61755
llvm-svn: 360380
This patch fixes PR41523
https://bugs.llvm.org/show_bug.cgi?id=41523
Regions can now nest/overlap provided that they have different names.
Anonymous regions cannot overlap.
Region end markers must specify the region name. The only exception is for when
there is only one user-defined region; in that particular case, the region end
marker doesn't need to specify a name.
Incorrect region end markers are no longer ignored. Instead, the tool reports an
error and we exit with an error code.
Added test cases to verify the new diagnostic error messages.
Updated the llvm-mca docs to reflect this feature change.
Differential Revision: https://reviews.llvm.org/D61676
llvm-svn: 360351
This restores part of r359311 that was reverted by r359830.
Rewrite the symbol types to fix several issues.
Notable difference is that the type of __init_array_start changes from
't' to 'd'.
GNU nm used to mark ELF symbols relative to .init_array as 't'
https://sourceware.org/bugzilla/show_bug.cgi?id=24505 (before 2.33)
because ".init" is the prefix. The bug was copied by r287803.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D61551
llvm-svn: 360339
Prior to this patch, llvm-objcopy's error messages for archives with
unsupported members only mentioned the archive name, not the member
name, making them unhelpful. This change improves it by approximately
following GNU objcopy's error message syntax of
"<archive name>(<member name>): <problem>".
Reviewed by: grimar
Differential Revision: https://reviews.llvm.org/D61674
llvm-svn: 360251
This patch adds support for --prefix-alloc-sections, which adds a prefix
to every allocated section names.
It adds a prefix after renaming section names by --rename-section as GNU
objcopy does.
Fixes PR41266: https://bugs.llvm.org/show_bug.cgi?id=41266
Differential Revision: https://reviews.llvm.org/D60042
Patch by Seiya Nuta.
llvm-svn: 360233
This is a fix for https://bugs.llvm.org/show_bug.cgi?id=41775,
Problem is in the final line:
Size += this->EntrySize;
I checked that we do not actually need it in this place,
since we always call removeSectionReferences which
calls removeSymbols which updates the Size.
But it worth to keep it, that allows to relax the dependencies.
Differential revision: https://reviews.llvm.org/D61636
llvm-svn: 360227
This fixes the https://bugs.llvm.org/show_bug.cgi?id=41355.
Previously with -r we printed relocation section name instead of the target section name.
It was like this: "RELOCATION RECORDS FOR [.rel.text]"
Now it is: "RELOCATION RECORDS FOR [.text]"
Also when relocation target section has more than one relocation section,
we did not combine the output. Now we do.
Differential revision: https://reviews.llvm.org/D61312
llvm-svn: 360143
It was previously writing this temporary snippet to file,
then reading it back, but leaving the tmp file in place.
This is both unefficient, and results in huge garbage pileup
in /tmp.
One would have thought it would have been caught during D60317..
llvm-svn: 360138
In some cases it is useful to explicitly set symbol's st_name value.
For example, I am using it in a patch for LLD to remove the broken
binary from a test case and replace it with a YAML test.
Differential revision: https://reviews.llvm.org/D61180
llvm-svn: 360137
This *APPEARS* to fix a *very* infuriating issue of Yaml's being corrupted,
partially written, truncated. Or at least i'm not seeing the issue
on a new benchmark sweep.
The issue is somewhat rare, happens maybe once in 1000 benchmarks.
Which means there are up to hundreds of broken benchmarks
for a full x86 sweep in a single mode.
llvm-svn: 360124
The only known user of this relocation type and symbol type is
the debug info sections, but we were not testing the `--relocatable`
output path.
This change adds a minimal test case to cover relocations against
section symbols includes `--relocatable` output.
Differential Revision: https://reviews.llvm.org/D61623
llvm-svn: 360110
TypedDINodeRef<T> is a redundant wrapper of Metadata * that is actually a T *.
Accordingly, change DI{Node,Scope,Type}Ref uses to DI{Node,Scope,Type} * or their const variants.
This allows us to delete many resolve() calls that clutter the code.
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D61369
llvm-svn: 360108
The purpose of this file is to make sure that all includes in llvm-c
works when included from a C source file (i.e no C++isms sneaked in).
To do this it must actually include all the include files.
Reviewed By: whitequark
Differential Revision: https://reviews.llvm.org/D61567
llvm-svn: 360033
Patch adds support for dumping of file headers with llvm-readobj. XCOFF
object files are added to test dumping a well formed file, and dumping
both negative timestamps and negative symbol counts, both of which are
allowed in the XCOFF definition.
Differential Revision: https://reviews.llvm.org/D60878
llvm-svn: 359878
As a side benefit, lld-link now reports more than one duplicate resource
entry before exiting with an error even if the new flag is not passed.
llvm-svn: 359829
This patch inverses the values returned by `addName` and
`lookup` methods of the class mentioned so that they
now return true on success and false on failure.
Also, it does minor code cleanup.
Differential revision: https://reviews.llvm.org/D61190
llvm-svn: 359818
If certain switches are not specified, llvm-strip behaves as if
--strip-all were specified. This means that for testing, when we don't
want the stripping behaviour, we have to specify one of these switches,
which can be confusing. This change adds --no-strip-all to allow an
alternative way of suppressing the default stripping, in a less
confusing manner.
Reviewed by: jakehehrlich, MaskRay
Differential Revision: https://reviews.llvm.org/D61377
llvm-svn: 359781
Summary:
It currently receives an output parameter and returns
std::error_code. Expected<StringRef> fits for this purpose perfectly.
Differential Revision: https://reviews.llvm.org/D61421
llvm-svn: 359774
This improves readability and the behavior is consistent with GNU objdump.
The new test test/tools/llvm-objdump/X86/disassemble-section-name.s
checks we print newlines before and after "Disassembly of section ...:"
Differential Revision: https://reviews.llvm.org/D61127
llvm-svn: 359668
Previously we did not report this.
Also this removes multiple lookups in the map
what cleanups the code.
Differential revision: https://reviews.llvm.org/D61322
llvm-svn: 359663
We use both -long-option and --long-option in tests. Switch to --long-option for consistency.
In the "llvm-readelf" mode, -long-option is discouraged as it conflicts with grouped short options and it is not accepted by GNU readelf.
While updating the tests, change llvm-readobj -s to llvm-readobj -S to reduce confusion ("s" is --section-headers in llvm-readobj but --symbols in llvm-readelf).
llvm-svn: 359649
GNU objcopy uses bfd_elf_get_default_section_type to decide the candidate section type,
which roughly translates to our [a] (I assume SEC_COMMON implies SHF_ALLOC):
(!(Sec.Flags & ELF::SHF_ALLOC) || Flags & (SectionFlag::SecContents | SectionFlag::SecLoad)))
Then, it updates the section type in bfd/elf.c:elf_fake_sections if:
if (this_hdr->sh_type == SHT_NULL)
this_hdr->sh_type = sh_type; // common case
else if (this_hdr->sh_type == SHT_NOBITS
&& sh_type == SHT_PROGBITS
&& (asect->flags & SEC_ALLOC) != 0) // uncommon case
...
this_hdr->sh_type = sh_type;
If the following condition is met the uncommon branch is executed:
if (elf_section_type (osec) == SHT_NULL
&& (osec->flags == isec->flags
|| (final_link
&& ((osec->flags ^ isec->flags)
& ~(SEC_LINK_ONCE | SEC_LINK_DUPLICATES | SEC_RELOC)) == 0)))
I suggest we just ignore this clause and follow the common case
behavior, which is done in this patch. Rationales to do so:
If --set-section-flags is a no-op (osec->flags == isec->flags)
(corresponds to the "readonly" test in set-section-flags.test), GNU
objcopy will require (Sec.Flags & ELF::SHF_ALLOC). [a] is essentially:
Flags & (SectionFlag::SecContents | SectionFlag::SecLoad)
This special case is not really useful. Non-SHF_ALLOC SHT_NOBITS
sections do not make much sense and it doesn't matter if they are
SHT_NOBITS or SHT_PROGBITS.
For all other RUN lines in set-section-flags.test, the new behavior
matches GNU objcopy, i.e. this patch improves compatibility.
Differential Revision: https://reviews.llvm.org/D60189
llvm-svn: 359639
Add overlap functionality to llvm-profdata tool to compute the similarity
between two profile files.
Differential Revision: https://reviews.llvm.org/D60977
llvm-svn: 359612
