Actually use the error return path rather than printing the duplicate
information then a separate error. But also just tidy up/deduplicate
some of the code for generating the diagnostic text.
llvm-svn: 269692
Summary:
This code is intended to be used as part of LLD's PDB writing. Until
that exists, this is exposed via llvm-readobj for testing purposes.
Type stream merging uses the following algorithm:
- Begin with a new empty stream, and a new empty hash table that maps
from type record contents to new type index.
- For each new type stream, maintain a map from source type index to
destination type index.
- For each record, copy it and rewrite its type indices to be valid in
the destination type stream.
- If the new type record is not already present in the destination
stream hash table, append it to the destination type stream, assign it
the next type index, and update the two hash tables.
- If the type record already exists in the destination stream, discard
it and update the type index map to forward the source type index to
the existing destination type index.
Reviewers: zturner, ruiu
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D20122
llvm-svn: 269521
Summary: This way we can get rid of one of the fields in the .def file.
Reviewers: llvm-commits
Subscribers: zturner
Differential Revision: http://reviews.llvm.org/D20251
llvm-svn: 269461
Most immediates are printed in Aarch64InstPrinter using 'formatImm' macro,
but not all of them.
Implementation contains following rules:
- floating point immediates are always printed as decimal
- signed integer immediates are printed depends on flag settings
(for negative values 'formatImm' macro prints the value as i.e -0x01
which may be convenient when imm is an address or offset)
- logical immediates are always printed as hex
- the 64-bit immediate for advSIMD, encoded in "a🅱️c:d:e:f:g:h" is always printed as hex
- the 64-bit immedaite in exception generation instructions like:
brk, dcps1, dcps2, dcps3, hlt, hvc, smc, svc is always printed as hex
- the rest of immediates is printed depends on availability
of -print-imm-hex
Signed-off-by: Maciej Gabka <maciej.gabka@arm.com>
Signed-off-by: Paul Osmialowski <pawel.osmialowski@arm.com>
Differential Revision: http://reviews.llvm.org/D16929
llvm-svn: 269446
In verbose mode, we emit a warning if the DWOId of a skeleton CU
mismatches the DWOId of the referenced module. This patch updates the
cached DWOId after a module has been loaded to the DWOId of the module
on disk (instead of storing the DWOId we expected to load). This
allows us to correctly emit the mismatch warning for all subsequent
object files that want to import the same module. This patch also
ensures both warnings are only emitted in verbose mode.
rdar://problem/26214027
llvm-svn: 269383
Summary:
Add support for emission of plaintext lists of the imported files for
each distributed backend compilation. Used for distributed build file
staging.
Invoked with new gold-plugin thinlto-emit-imports-files option, which is
only valid with thinlto-index-only (i.e. for distributed builds), or
from llvm-lto with new -thinlto-action=emitimports value.
Depends on D19556.
Reviewers: joker.eph
Subscribers: llvm-commits, joker.eph
Differential Revision: http://reviews.llvm.org/D19636
llvm-svn: 269067
This restores commit r268627:
Summary:
When launching ThinLTO backends in a distributed build (currently
supported in gold via the thinlto-index-only plugin option), emit
an individual index file for each backend process as described here:
http://lists.llvm.org/pipermail/llvm-dev/2016-April/098272.html
...
Differential Revision: http://reviews.llvm.org/D19556
Address msan failures by avoiding std::prev on map.end(), the
theory is that this is causing issues due to some known UB problems
in __tree.
llvm-svn: 269059
The BinaryHolder would query the archive member MemoryBuffer name
to check if the current open archive also contains the next requested
objectfile. This comparison was using a StringRef to a temporary
buffer. It only happened with fat archives. This commit adds long-lived
storage along with the MemoryBuffers for the fat archive filename.
The added test would fail during an ASAN build without the fix.
llvm-svn: 268924
r267249 removed the dual ARM/Thumb interface from MachOObjectFile,
simplifying llvm-dsymutil's code. This unfortunately also regressed
llvm-dsymutil's ability to select thumb slices, because the simplified
code was also dealing with the discrepency between the slice arch
(eg. armv7m) and the triple arch name (eg. thumbv7m).
llvm-svn: 268894
Summary:
When launching ThinLTO backends in a distributed build (currently
supported in gold via the thinlto-index-only plugin option), emit
an individual index file for each backend process as described here:
http://lists.llvm.org/pipermail/llvm-dev/2016-April/098272.html
The individual index file encodes the summary and module information
required for implementing the importing/exporting decisions made
for a given module in the thin link step.
This is in place of the current mechanism that uses the combined index
to make importing decisions in each back end independently. It is an
enabler for doing global summary based optimizations in the thin link
step (which will be recorded in the individual index files), and reduces
the size of the index that must be sent to each backend process, and
the amount of work to scan it in the backends.
Rather than create entirely new ModuleSummaryIndex structures (and all
the included unique_ptrs) for each backend index file, a map is created
to record all of the GUID and summary pointers needed for a particular
index file. The IndexBitcodeWriter walks this map instead of the full
index (hiding the details of managing the appropriate summary iteration
in a new iterator subclass). This is more efficient than walking the
entire combined index and filtering out just the needed summaries during
each backend bitcode index write.
Depends on D19481.
Reviewers: joker.eph
Subscribers: llvm-commits, joker.eph
Differential Revision: http://reviews.llvm.org/D19556
llvm-svn: 268627
If the linker requested to preserve a linkonce function, we should
honor this even if we drop all uses.
We explicitely avoid turning them into weak_odr (unlike the first
version of this patch in r267644), because the codegen can be
different on Darwin: because of `llvm::canBeOmittedFromSymbolTable()`
we may emit the symbol as weak_def_can_be_hidden instead of
weak_definition.
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 268607
This reverts commit r267644. Turning linkonce_odr into weak_odr is
a sementic change on Darwin: because of
`llvm::canBeOmittedFromSymbolTable()` we may emit the symbol as
weak_def_can_be_hidden instead of weak_definition.
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 268606
.MIPS.options section specifies miscellaneous options to be applied
to an object file. LLVM as well as modern versions of GNU tools emit
the only type of the options - ODK_REGINFO. The patch teaches llvm-readobj
to print details of the ODK_REGINFO and skip contents of other options.
llvm-svn: 268478
llvm-dsymutil used to create the temporary files in the output directory.
This works fine except when the output directory contains a '%' char, which
is then replaced by llvm::sys::fs::createUniqueFile() generating an invalid
path.
Just use the default temp dir for those files.
llvm-svn: 268304
Two problems, 1) for the last 4 bytes it would print them as separate bytes not a word
and 2) it would print the same last byte for those bytes less than a word.
rdar://25938224
llvm-svn: 267819
This was crashing llvm-objdump with -macho -objc-meta-data when trying dump a non-existent section.
So the test binary is simply created from an empty .s file compiled with: clang -arch armv7 empty.s -c
llvm-svn: 267782
Summary:
llvm-symbolizer wants to get linkage names of functions for historical
reasons. Linkage names are only recorded in the PDB for public symbols,
and the linkage name is apparently stored separately in some "public
symbol" record. We had a workaround in PDBContext which would look for
such symbols when the user requested linkage names.
However, when given an address that was truly in a private function and
public funciton, we would accidentally find nearby public symbols and
return those function names. The fix is to look for both function
symbols and public symbols and only prefer the public symbol name if the
addresses of the symbols agree.
Fixes PR27492
Reviewers: zturner
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D19571
llvm-svn: 267732
This test also runs on e.g. ARM-native builds when the X86 backend is also
built. This test produces code for the default instruction set, even though it
is in a "X86" sub-directory. Given that this test doesn't seem to be testing
anything architecture-specific, it seems it's best to adapt the check to not
check for an architecture-dependent value (the size of the function), rather
than hard-code the test to target x86.
llvm-svn: 267722
Summary:
With the removal of support for lazy parsing of combined index summary
records (e.g. r267344), we no longer need to include the summary record
bitcode offset in the VST entries for definitions. Change the combined
index format to be similar to the per-module index format in using value
ids to cross-reference from the summary record to the VST entry (rather
than the summary record bitcode offset to cross-reference in the other
direction).
The visible changes are:
1) Add the value id to the combined summary records
2) Remove the summary offset from the combined VST records, which has
the following effects:
- No longer need the VST_CODE_COMBINED_GVDEFENTRY record, as all
combined index VST entries now only contain the value id and
corresponding GUID.
- No longer have duplicate VST entries in the case where there are
multiple definitions of a symbol (e.g. weak/linkonce), as they all
have the same value id and GUID.
An implication of #2 above is that in order to hook up an alias to the
correct aliasee based on the value id of the aliasee recorded in the
combined index alias record, we need to scan the entries in the index
for that GUID to find the one from the same module (i.e. the case where
there are multiple entries for the aliasee). But the reader no longer
has to maintain a special map to hook up the alias/aliasee.
Reviewers: joker.eph
Subscribers: joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D19481
llvm-svn: 267712
Summary:
If the linker requested to preserve a linkonce function, we should
honor this even if we drop all uses.
Reviewers: dexonsmith
Subscribers: llvm-commits, joker.eph
Differential Revision: http://reviews.llvm.org/D19527
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 267644
Fix early exit from linkInModule. IRMover::move returns false on
success and true on error.
Add a few more cases of merged common linkage variables with
different sizes and alignments.
llvm-svn: 267437
Until PR27449 (https://llvm.org/bugs/show_bug.cgi?id=27449) is fixed in
clang this warning is pointless, since ASTFileSignatures will change
randomly when a module is rebuilt.
rdar://problem/25610919
llvm-svn: 267427
If several regions cover the same area of code, we have to restore
the combined value for that area when return from a nested region.
This patch achieves that by combining regions before calling buildSegments.
Differential Revision: http://reviews.llvm.org/D18610
llvm-svn: 267390
Summary:
This removes a couple of flags added to control this behavior, and
simply keeps all value names when save-temps is specified.
Reviewers: rafael
Subscribers: llvm-commits, pcc, davide
Differential Revision: http://reviews.llvm.org/D19384
llvm-svn: 267279
Before we printed a warning to stderr and left the actual output stream in a
mess. This tries to print a .long or .short representation of what we saw (as
if there was a data-in-code directive).
This isn't guaranteed to restore synchronization in Thumb-mode (if the invalid
instruction was supposed to be 32-bits, we may be off-by-16 for the rest of the
function). But there's no certain way to deal with that, and it's invalid code
anyway (if the data really wasn't an instruction, the user can add proper
.data_in_code directives if they care)
llvm-svn: 267250
Only one consumer (llvm-objdump) actually cared about the fact that there were
two triples. Others were actively working around the fact that the Triple
returned by getArch might have been invalid. As for llvm-objdump, it needs to
be acutely aware of both Triples anyway, so being generic in the exposed API is
no benefit.
Also rename the version of getArch returning a Triple. Users were having to
pass an unwanted nullptr to disambiguate the two, which was nasty.
The only functional change here is that armv7m and armv7em object files no
longer crash llvm-objdump.
llvm-svn: 267249
This restores r266871 with a fix for gold tests relying on the value
names, when using a release compiler, by adding a way to disable the
default discarding. Update affected tests to use the new mechanism so
that value names are preserved as expected, regardless of how the
compiler was built.
llvm-svn: 266881
This reverts commit r266871. Setting the default based on the NDEBUG
flag is causing test failures. Need to figure out whether to change this
approach or update tests.
llvm-svn: 266872
Summary:
Applies Mehdi's optimization (r263086) to disable value names other than
for GlobalValues to LTO/ThinLTO performed via the gold-plugin, in the
same manner as it is applied in libLTO.
Reviewers: rafael, joker-eph
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D19269
llvm-svn: 266871
