Summary:
This is a NFC change that removes the NFA->DFA construction and emission logic from DFAPacketizerEmitter and instead uses the generic DFAEmitter logic. This allows DFAPacketizer to use the Automaton class from Support and remove a bunch of logic there too.
After this patch, DFAPacketizer is mostly logic for grepping Itineraries and collecting functional units, with no state machine logic. This will allow us to modernize by removing the 16-functional-unit limit and supporting non-itinerary functional units. This is all for followup patches.
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68992
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@375086 91177308-0d34-0410-b5e6-96231b3b80d8
The Hexagon code assumes there's no existing terminator when inserting its
trip count condition check.
This causes swp-stages5.ll to break. The generated code looks good to me,
it is likely a permutation. I have disabled the new codegen path to keep
everything green and will investigate along with the other 3-4 tests
that have different codegen.
Fixes expensive-checks build.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@373629 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This extends the PeelingModuloScheduleExpander to generate prolog and epilog code,
and correctly stitch uses through the prolog, kernel, epilog DAG.
The key concept in this patch is to ensure that all transforms are *local*; only a
function of a block and its immediate predecessor and successor. By defining the problem in this way
we can inductively rewrite the entire DAG using only local knowledge that is easy to
reason about.
For example, we assume that all prologs and epilogs are near-perfect clones of the
steady-state kernel. This means that if a block has an instruction that is predicated out,
we can redirect all users of that instruction to that equivalent instruction in our
immediate predecessor. As all blocks are clones, every instruction must have an equivalent in
every other block.
Similarly we can make the assumption by construction that if a value defined in a block is used
outside that block, the only possible user is its immediate successors. We maintain this
even for values that are used outside the loop by creating a limited form of LCSSA.
This code isn't small, but it isn't complex.
Enabled a bunch of testing from Hexagon. There are a couple of tests not enabled yet;
I'm about 80% sure there isn't buggy codegen but the tests are checking for patterns
that we don't produce. Those still need a bit more investigation. In the meantime we
(Google) are happy with the code produced by this on our downstream SMS implementation,
and believe it generates correct code.
Subscribers: mgorny, hiraditya, jsji, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68205
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@373462 91177308-0d34-0410-b5e6-96231b3b80d8
Recommit: fix asan errors.
The way MachinePipeliner uses these target hooks is stateful - we reduce trip
count by one per call to reduceLoopCount. It's a little overfit for hardware
loops, where we don't have to worry about stitching a loop induction variable
across prologs and epilogs (the induction variable is implicit).
This patch introduces a new API:
/// Analyze loop L, which must be a single-basic-block loop, and if the
/// conditions can be understood enough produce a PipelinerLoopInfo object.
virtual std::unique_ptr<PipelinerLoopInfo>
analyzeLoopForPipelining(MachineBasicBlock *LoopBB) const;
The return value is expected to be an implementation of the abstract class:
/// Object returned by analyzeLoopForPipelining. Allows software pipelining
/// implementations to query attributes of the loop being pipelined.
class PipelinerLoopInfo {
public:
virtual ~PipelinerLoopInfo();
/// Return true if the given instruction should not be pipelined and should
/// be ignored. An example could be a loop comparison, or induction variable
/// update with no users being pipelined.
virtual bool shouldIgnoreForPipelining(const MachineInstr *MI) const = 0;
/// Create a condition to determine if the trip count of the loop is greater
/// than TC.
///
/// If the trip count is statically known to be greater than TC, return
/// true. If the trip count is statically known to be not greater than TC,
/// return false. Otherwise return nullopt and fill out Cond with the test
/// condition.
virtual Optional<bool>
createTripCountGreaterCondition(int TC, MachineBasicBlock &MBB,
SmallVectorImpl<MachineOperand> &Cond) = 0;
/// Modify the loop such that the trip count is
/// OriginalTC + TripCountAdjust.
virtual void adjustTripCount(int TripCountAdjust) = 0;
/// Called when the loop's preheader has been modified to NewPreheader.
virtual void setPreheader(MachineBasicBlock *NewPreheader) = 0;
/// Called when the loop is being removed.
virtual void disposed() = 0;
};
The Pipeliner (ModuloSchedule.cpp) can use this object to modify the loop while
allowing the target to hold its own state across all calls. This API, in
particular the disjunction of creating a trip count check condition and
adjusting the loop, improves the code quality in ModuloSchedule.cpp.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@372463 91177308-0d34-0410-b5e6-96231b3b80d8
This commit broke the ASan buildbot. See comments in rL372376 for more
information.
This reverts commit 15e27b0b6d9d51362fad85dbe95ac5b3fadf0a06.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@372425 91177308-0d34-0410-b5e6-96231b3b80d8
The way MachinePipeliner uses these target hooks is stateful - we reduce trip
count by one per call to reduceLoopCount. It's a little overfit for hardware
loops, where we don't have to worry about stitching a loop induction variable
across prologs and epilogs (the induction variable is implicit).
This patch introduces a new API:
/// Analyze loop L, which must be a single-basic-block loop, and if the
/// conditions can be understood enough produce a PipelinerLoopInfo object.
virtual std::unique_ptr<PipelinerLoopInfo>
analyzeLoopForPipelining(MachineBasicBlock *LoopBB) const;
The return value is expected to be an implementation of the abstract class:
/// Object returned by analyzeLoopForPipelining. Allows software pipelining
/// implementations to query attributes of the loop being pipelined.
class PipelinerLoopInfo {
public:
virtual ~PipelinerLoopInfo();
/// Return true if the given instruction should not be pipelined and should
/// be ignored. An example could be a loop comparison, or induction variable
/// update with no users being pipelined.
virtual bool shouldIgnoreForPipelining(const MachineInstr *MI) const = 0;
/// Create a condition to determine if the trip count of the loop is greater
/// than TC.
///
/// If the trip count is statically known to be greater than TC, return
/// true. If the trip count is statically known to be not greater than TC,
/// return false. Otherwise return nullopt and fill out Cond with the test
/// condition.
virtual Optional<bool>
createTripCountGreaterCondition(int TC, MachineBasicBlock &MBB,
SmallVectorImpl<MachineOperand> &Cond) = 0;
/// Modify the loop such that the trip count is
/// OriginalTC + TripCountAdjust.
virtual void adjustTripCount(int TripCountAdjust) = 0;
/// Called when the loop's preheader has been modified to NewPreheader.
virtual void setPreheader(MachineBasicBlock *NewPreheader) = 0;
/// Called when the loop is being removed.
virtual void disposed() = 0;
};
The Pipeliner (ModuloSchedule.cpp) can use this object to modify the loop while
allowing the target to hold its own state across all calls. This API, in
particular the disjunction of creating a trip count check condition and
adjusting the loop, improves the code quality in ModuloSchedule.cpp.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@372376 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This catches malformed mir files which specify alignment as log2 instead of pow2.
See https://reviews.llvm.org/D65945 for reference,
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet
Subscribers: MatzeB, qcolombet, dschuff, arsenm, sdardis, nemanjai, jvesely, nhaehnle, hiraditya, kbarton, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, jsji, Petar.Avramovic, asbirlea, s.egerton, pzheng, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67433
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@371608 91177308-0d34-0410-b5e6-96231b3b80d8
Reapply with fix to reduce resources required by the compiler - use
unsigned[2] instead of std::pair. This causes clang and gcc to compile
the generated file multiple times faster, and hopefully will reduce
the resource requirements on Visual Studio also. This fix is a little
ugly but it's clearly the same issue the previous author of
DFAPacketizer faced (the previous tables use unsigned[2] rather uglily
too).
This patch allows the DFAPacketizer to be queried after a packet is formed to work out which
resources were allocated to the packetized instructions.
This is particularly important for targets that do their own bundle packing - it's not
sufficient to know simply that instructions can share a packet; which slots are used is
also required for encoding.
This extends the emitter to emit a side-table containing resource usage diffs for each
state transition. The packetizer maintains a set of all possible resource states in its
current state. After packetization is complete, all remaining resource states are
possible packetization strategies.
The sidetable is only ~500K for Hexagon, but the extra tracking is disabled by default
(most uses of the packetizer like MachinePipeliner don't care and don't need the extra
maintained state).
Differential Revision: https://reviews.llvm.org/D66936
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@371399 91177308-0d34-0410-b5e6-96231b3b80d8
This patch allows the DFAPacketizer to be queried after a packet is formed to work out which
resources were allocated to the packetized instructions.
This is particularly important for targets that do their own bundle packing - it's not
sufficient to know simply that instructions can share a packet; which slots are used is
also required for encoding.
This extends the emitter to emit a side-table containing resource usage diffs for each
state transition. The packetizer maintains a set of all possible resource states in its
current state. After packetization is complete, all remaining resource states are
possible packetization strategies.
The sidetable is only ~500K for Hexagon, but the extra tracking is disabled by default
(most uses of the packetizer like MachinePipeliner don't care and don't need the extra
maintained state).
Differential Revision: https://reviews.llvm.org/D66936
........
Reverted as this is causing "compiler out of heap space" errors on MSVC 2017/19 NDEBUG builds
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@371393 91177308-0d34-0410-b5e6-96231b3b80d8
This patch allows the DFAPacketizer to be queried after a packet is formed to work out which
resources were allocated to the packetized instructions.
This is particularly important for targets that do their own bundle packing - it's not
sufficient to know simply that instructions can share a packet; which slots are used is
also required for encoding.
This extends the emitter to emit a side-table containing resource usage diffs for each
state transition. The packetizer maintains a set of all possible resource states in its
current state. After packetization is complete, all remaining resource states are
possible packetization strategies.
The sidetable is only ~500K for Hexagon, but the extra tracking is disabled by default
(most uses of the packetizer like MachinePipeliner don't care and don't need the extra
maintained state).
Differential Revision: https://reviews.llvm.org/D66936
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@371198 91177308-0d34-0410-b5e6-96231b3b80d8
Emitting a schedule is really hard. There are lots of corner cases to take care of; in fact, of the 60+ SWP-specific testcases in the Hexagon backend most of those are testing codegen rather than the schedule creation itself.
One issue is that to test an emission corner case we must craft an input such that the generated schedule uses that corner case; sometimes this is very hard and convolutes testcases. Other times it is impossible but we want to test it anyway.
This patch adds a simple test pass that will consume a module containing a loop and generate pipelined code from it. We use post-instr-symbols as a way to annotate instructions with the stage and cycle that we want to schedule them at.
We also provide a flag that causes the MachinePipeliner to generate these annotations instead of actually emitting code; this allows us to generate an input testcase with:
llc < %s -stop-after=pipeliner -pipeliner-annotate-for-testing -o test.mir
And run the emission in isolation with:
llc < test.mir -run-pass=modulo-schedule-test
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@370705 91177308-0d34-0410-b5e6-96231b3b80d8
The motivating bugs are:
https://bugs.llvm.org/show_bug.cgi?id=41340https://bugs.llvm.org/show_bug.cgi?id=42697
As discussed there, we could view this as a failure of IR canonicalization,
but then we would need to implement a backend fixup with target overrides
to get this right in all cases. Instead, we can just view this as a codegen
opportunity. It's not even clear for x86 exactly when we should favor
test+set; some CPUs have better theoretical throughput for the ALU ops than
bt/test.
This patch is made more complicated than I expected because there's an early
DAGCombine for 'and' that can change types of the intermediate ops via
trunc+anyext.
Differential Revision: https://reviews.llvm.org/D66687
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@370668 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts r369664 (git commit 51f48295cbe8fa3a44db263b528dd9f7bae7bf9a)
It causes many benchmark regressions, internally and in llvm's benchmark suite.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@370398 91177308-0d34-0410-b5e6-96231b3b80d8
Patch https://reviews.llvm.org/D43256 introduced more aggressive loop layout optimization which depends on profile information. If profile information is not available, the statically estimated profile information(generated by BranchProbabilityInfo.cpp) is used. If user program doesn't behave as BranchProbabilityInfo.cpp expected, the layout may be worse.
To be conservative this patch restores the original layout algorithm in plain mode. But user can still try the aggressive layout optimization with -force-precise-rotation-cost=true.
Differential Revision: https://reviews.llvm.org/D65673
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@369664 91177308-0d34-0410-b5e6-96231b3b80d8
It caused assertions to fire when building Chromium:
lib/CodeGen/LiveDebugValues.cpp:331: bool
{anonymous}::LiveDebugValues::OpenRangesSet::empty() const: Assertion
`Vars.empty() == VarLocs.empty() && "open ranges are inconsistent"' failed.
See https://crbug.com/992871#c3 for how to reproduce.
> Patch https://reviews.llvm.org/D43256 introduced more aggressive loop layout optimization which depends on profile information. If profile information is not available, the statically estimated profile information(generated by BranchProbabilityInfo.cpp) is used. If user program doesn't behave as BranchProbabilityInfo.cpp expected, the layout may be worse.
>
> To be conservative this patch restores the original layout algorithm in plain mode. But user can still try the aggressive layout optimization with -force-precise-rotation-cost=true.
>
> Differential Revision: https://reviews.llvm.org/D65673
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@368579 91177308-0d34-0410-b5e6-96231b3b80d8
Patch https://reviews.llvm.org/D43256 introduced more aggressive loop layout optimization which depends on profile information. If profile information is not available, the statically estimated profile information(generated by BranchProbabilityInfo.cpp) is used. If user program doesn't behave as BranchProbabilityInfo.cpp expected, the layout may be worse.
To be conservative this patch restores the original layout algorithm in plain mode. But user can still try the aggressive layout optimization with -force-precise-rotation-cost=true.
Differential Revision: https://reviews.llvm.org/D65673
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@368339 91177308-0d34-0410-b5e6-96231b3b80d8
This allows targets to make more decisions about reserved registers
after isel. For example, now it should be certain there are calls or
stack objects in the frame or not, which could have been introduced by
legalization.
Patch by Matthias Braun
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@363757 91177308-0d34-0410-b5e6-96231b3b80d8
Current findBestLoopTop can find and move one kind of block to top, a latch block has one successor. Another common case is:
* a latch block
* it has two successors, one is loop header, another is exit
* it has more than one predecessors
If it is below one of its predecessors P, only P can fall through to it, all other predecessors need a jump to it, and another conditional jump to loop header. If it is moved before loop header, all its predecessors jump to it, then fall through to loop header. So all its predecessors except P can reduce one taken branch.
Differential Revision: https://reviews.llvm.org/D43256
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@363471 91177308-0d34-0410-b5e6-96231b3b80d8
We use both -long-option and --long-option in tests. Switch to --long-option for consistency.
In the "llvm-readelf" mode, -long-option is discouraged as it conflicts with grouped short options and it is not accepted by GNU readelf.
While updating the tests, change llvm-readobj -s to llvm-readobj -S to reduce confusion ("s" is --section-headers in llvm-readobj but --symbols in llvm-readelf).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@359649 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Targets like ARM, MSP430, PPC, and SystemZ have complex behavior when
printing the address of a MachineOperand::MO_GlobalAddress. Move that
handling into a new overriden method in each base class. A virtual
method was added to the base class for handling the generic case.
Refactors a few subclasses to support the target independent %a, %c, and
%n.
The patch also contains small cleanups for AVRAsmPrinter and
SystemZAsmPrinter.
It seems that NVPTXTargetLowering is possibly missing some logic to
transform GlobalAddressSDNodes for
TargetLowering::LowerAsmOperandForConstraint to handle with "i" extended
inline assembly asm constraints.
Fixes:
- https://bugs.llvm.org/show_bug.cgi?id=41402
- https://github.com/ClangBuiltLinux/linux/issues/449
Reviewers: echristo, void
Reviewed By: void
Subscribers: void, craig.topper, jholewinski, dschuff, jyknight, dylanmckay, sdardis, nemanjai, javed.absar, sbc100, jgravelle-google, eraman, kristof.beyls, hiraditya, aheejin, kbarton, fedor.sergeev, jrtc27, atanasyan, jsji, llvm-commits, kees, tpimh, nathanchance, peter.smith, srhines
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60887
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@359337 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
When refactoring vectorization flags, vectorization was disabled by default in the new pass manager.
This patch re-enables is for both managers, and changes the assumptions opt makes, based on the new defaults.
Comments in opt.cpp should clarify the intended use of all flags to enable/disable vectorization.
Reviewers: chandlerc, jgorbe
Subscribers: jlebar, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61091
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@359167 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The DAGCombiner is rewriting (canonicalizing) an ISD::ADD
with no common bits set in the operands as an ISD::OR node.
This could sometimes result in "missing out" on some
combines that normally are performed for ADD. To be more
specific this could happen if we already have rewritten an
ADD into OR, and later (after legalizations or combines)
we expose patterns that could have been optimized if we
had seen the OR as an ADD (e.g. reassociations based on ADD).
To make the DAG combiner less sensitive to if ADD or OR is
used for these "no common bits set" ADD/OR operations we
now apply most of the ADD combines also to an OR operation,
when value tracking indicates that the operands have no
common bits set.
Reviewers: spatel, RKSimon, craig.topper, kparzysz
Reviewed By: spatel
Subscribers: arsenm, rampitec, lebedev.ri, jvesely, nhaehnle, hiraditya, javed.absar, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59758
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@358965 91177308-0d34-0410-b5e6-96231b3b80d8
In some circumstances we can end up with setup costs that are very complex to
compute, even though the scevs are not very complex to create. This can also
lead to setupcosts that are calculated to be exactly -1, which LSR treats as an
invalid cost. This patch puts a limit on the recursion depth for setup cost to
prevent them taking too long.
Thanks to @reames for the report and test case.
Differential Revision: https://reviews.llvm.org/D60944
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@358958 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
None of these derived classes do anything that the base class cannot.
If we remove these case statements, then the base class can handle them
just fine.
Reviewers: peter.smith, echristo
Reviewed By: echristo
Subscribers: nemanjai, javed.absar, eraman, kristof.beyls, hiraditya, kbarton, jsji, llvm-commits, srhines
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60803
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@358603 91177308-0d34-0410-b5e6-96231b3b80d8
The Hexagon Vector Loop Carried Reuse pass was allowing reuse between
two shufflevectors with different masks. The reason is that the masks
are not instruction objects, so the code that checks each operand
just skipped over the operands.
This patch fixes the bug by checking if the operands are the same
when they are not instruction objects. If the objects are not the
same, then the code assumes that reuse cannot occur.
Differential Revision: https://reviews.llvm.org/D60019
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@358292 91177308-0d34-0410-b5e6-96231b3b80d8
The isLoopCarriedDep function does not correctly compute loop
carried dependences when the array index offset is negative
or the stride is smallar than the access size.
Patch by Denis Antrushin.
Differential Revision: https://reviews.llvm.org/D60135
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@358233 91177308-0d34-0410-b5e6-96231b3b80d8
In some loops, we end up generating loop induction variables that look like:
{(-1 * (zext i16 (%i0 * %i1) to i32))<nsw>,+,1}
As opposed to the simpler:
{(zext i16 (%i0 * %i1) to i32),+,-1}
i.e we count up from -limit to 0, not the simpler counting down from limit to
0. This is because the scores, as LSR calculates them, are the same and the
second is filtered in place of the first. We end up with a redundant SUB from 0
in the code.
This patch tries to make the calculation of the setup cost a little more
thoroughly, recursing into the scev members to better approximate the setup
required. The cost function for comparing LSR costs is:
return std::tie(C1.NumRegs, C1.AddRecCost, C1.NumIVMuls, C1.NumBaseAdds,
C1.ScaleCost, C1.ImmCost, C1.SetupCost) <
std::tie(C2.NumRegs, C2.AddRecCost, C2.NumIVMuls, C2.NumBaseAdds,
C2.ScaleCost, C2.ImmCost, C2.SetupCost);
So this will only alter results if none of the other variables turn out to be
different.
Differential Revision: https://reviews.llvm.org/D58770
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@355597 91177308-0d34-0410-b5e6-96231b3b80d8
James Molloy