Current implementation of Instruction::mayReadFromMemory()
returns !doesNotAccessMemory() which is !ReadNone. This
does not take into account that the writeonly attribute
also indicates that the call does not read from memory.
The patch changes the predicate to !doesNotReadMemory()
that reflects the intended behavior.
Differential Revision: https://reviews.llvm.org/D69086
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@375389 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Update compare normalization in SimpleValue hashing to break ties (when
the same value is being compared to itself) by switching to the swapped
predicate if it has a lower numerical value. This brings the hashing in
line with isEqual, which already recognizes the self-compares with
swapped predicates as equal.
Fixes PR 42280.
Reviewers: spatel, efriedma, nikic, fhahn, uabelho
Reviewed By: nikic
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63349
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@363598 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The logic in EarlyCSE that looks through 'not' operations in the
predicate recognizes e.g. that `select (not (cmp sgt X, Y)), X, Y` is
equivalent to `select (cmp sgt X, Y), Y, X`. Without this change,
however, only the latter is recognized as a form of `smin X, Y`, so the
two expressions receive different hash codes. This leads to missed
optimization opportunities when the quadratic probing for the two hashes
doesn't happen to collide, and assertion failures when probing doesn't
collide on insertion but does collide on a subsequent table grow
operation.
This change inverts the order of some of the pattern matching, checking
first for the optional `not` and then for the min/max/abs patterns, so
that e.g. both expressions above are recognized as a form of `smin X, Y`.
It also adds an assertion to isEqual verifying that it implies equal
hash codes; this fires when there's a collision during insertion, not
just grow, and so will make it easier to notice if these functions fall
out of sync again. A new flag --earlycse-debug-hash is added which can
be used when changing the hash function; it forces hash collisions so
that any pair of values inserted which compare as equal but hash
differently will be caught by the isEqual assertion.
Reviewers: spatel, nikic
Reviewed By: spatel, nikic
Subscribers: lebedev.ri, arsenm, craig.topper, efriedma, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62644
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@363274 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit rr360902. It caused an assertion failure in
lib/IR/DebugInfoMetadata.cpp: Assertion `(OffsetInBits + SizeInBits <=
FragmentSizeInBits) && "new fragment outside of original fragment"'
failed.
PR41931.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@361246 91177308-0d34-0410-b5e6-96231b3b80d8
Fixes issue: https://bugs.llvm.org/show_bug.cgi?id=40645
Previously, LLVM had no functional way of performing casts inside of a
DIExpression(), which made salvaging cast instructions other than Noop casts
impossible. With the recent addition of DW_OP_LLVM_convert this salvaging is
now possible, and so can be used to fix the attached bug as well as any cases
where SExt instruction results are lost in the debugging metadata. This patch
introduces this fix by expanding the salvage debug info method to cover these
cases using the new operator.
Differential revision: https://reviews.llvm.org/D61184
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@360902 91177308-0d34-0410-b5e6-96231b3b80d8
As it's causing some bot failures (and per request from kbarton).
This reverts commit r358543/ab70da07286e618016e78247e4a24fcb84077fda.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@358546 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
EarlyCSE can make IR changes that will leave MemorySSA with accesses claiming to be optimized, but for which a subsequent MemorySSA run will yield a different optimized result.
Due to relying on AA queries, we can't fix this in general, unless we recompute MemorySSA.
Adding some tests to track this and a basic verify for future potential failures.
Reviewers: george.burgess.iv, gberry
Subscribers: sanjoy, jlebar, Prazek, llvm-commits
Differential Revision: https://reviews.llvm.org/D51960
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@342422 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Patch by Marek Olsak and David Stuttard, both of AMD.
This adds a new amdgcn intrinsic supporting s.buffer.load, in particular
multiple dword variants. These are convenient to use from some front-end
implementations.
Also modified the existing llvm.SI.load.const intrinsic to common up the
underlying implementation.
This modification also requires that we can lower to non-uniform loads correctly
by splitting larger dword variants into sizes supported by the non-uniform
versions of the load.
V2: Addressed minor review comments.
V3: i1 glc is now i32 cachepolicy for consistency with buffer and
tbuffer intrinsics, plus fixed formatting issue.
V4: Added glc test.
Subscribers: arsenm, kzhuravl, jvesely, wdng, nhaehnle, yaxunl, dstuttard, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D51098
Change-Id: I83a6e00681158bb243591a94a51c7baa445f169b
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@340684 91177308-0d34-0410-b5e6-96231b3b80d8
MemorySSA currently creates MemoryAccesses for lifetime intrinsics, and
sometimes treats them as clobbers. This may/may not be the best way
forward, but while we're doing it, we should consider
MayAlias/PartialAlias to be clobbers.
The ideal fix here is probably to remove all of this reasoning about
lifetimes from MemorySSA + put it into the passes that need to care. But
that's a wayyy broader fix that needs some consensus, and we have
miscompiles + a release branch today, and this should solve the
miscompiles just as well.
differential revision is D43269. Landing without an explicit LGTM (and
without using the special please-autoclose-this syntax) so we can still
use that revision as a place to decide what the right fix here is.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@339411 91177308-0d34-0410-b5e6-96231b3b80d8
This patches teaches EarlyCSE to figure out that if `and i1 %x, %y` is true then both
`%x` and `%y` are true in the taken branch, and if `or i1 %x, %y` is false then both
`%x` and `%y` are false in non-taken branch. Fix for PR37635.
Differential Revision: https://reviews.llvm.org/D47574
Reviewed By: reames
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@334707 91177308-0d34-0410-b5e6-96231b3b80d8
Change matchSelectPattern to return X and -X for ABS/NABS in a well defined order. Adjust EarlyCSE to account for this. Ensure the SPF result is some kind of min/max and not abs/nabs in one place in InstCombine that made me nervous.
Prevously we returned the two operands of the compare part of the abs pattern. The RHS is always going to be a 0i, 1 or -1 constant. This isn't a very meaningful thing to return for any one. There's also some freedom in the abs pattern as to what happens when the value is equal to 0. This freedom led to early cse failing to match when different constants were used in otherwise equivalent operations. By returning the input and its negation in a defined order we can ensure an exact match. This also makes sure both patterns use the exact same subtract instruction for the negation. I believe CSE should evebntually make this happen and properly merge the nsw/nuw flags. But I'm not familiar with CSE and what order it does things in so it seemed like it might be good to really enforce that they were the same.
Differential Revision: https://reviews.llvm.org/D47037
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@332865 91177308-0d34-0410-b5e6-96231b3b80d8
In order to set breakpoints on labels and list source code around
labels, we need collect debug information for labels, i.e., label
name, the function label belong, line number in the file, and the
address label located. In order to keep these information in LLVM
IR and to allow backend to generate debug information correctly.
We create a new kind of metadata for labels, DILabel. The format
of DILabel is
!DILabel(scope: !1, name: "foo", file: !2, line: 3)
We hope to keep debug information as much as possible even the
code is optimized. So, we create a new kind of intrinsic for label
metadata to avoid the metadata is eliminated with basic block.
The intrinsic will keep existing if we keep it from optimized out.
The format of the intrinsic is
llvm.dbg.label(metadata !1)
It has only one argument, that is the DILabel metadata. The
intrinsic will follow the label immediately. Backend could get the
label metadata through the intrinsic's parameter.
We also create DIBuilder API for labels to be used by Frontend.
Frontend could use createLabel() to allocate DILabel objects, and use
insertLabel() to insert llvm.dbg.label intrinsic in LLVM IR.
Differential Revision: https://reviews.llvm.org/D45024
Patch by Hsiangkai Wang.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@331841 91177308-0d34-0410-b5e6-96231b3b80d8
If we've already established an invariant scope with an earlier generation, we don't want to hide it in the scoped hash table with one with a later generation. I noticed this when working on the invariant-load handling, but it also applies to the invariant.start case as well.
Without this change, my previous patch for invariant-load regresses some cases, so I'm pushing this without waiting for review. This is why you don't make last minute tweaks to patches to catch "obvious cases" after it's already been reviewed. Bad Philip!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@327655 91177308-0d34-0410-b5e6-96231b3b80d8
This is a follow up to https://reviews.llvm.org/D43716 which rewrites the invariant load handling using the new infrastructure. It's slightly more powerful, but only in somewhat minor ways for the moment. It's not clear that DSE of stores to invariant locations is actually interesting since why would your IR have such a construct to start with?
Note: The submitted version is slightly different than the reviewed one. I realized the scope could start for an invariant load which was proven redundant and removed. Added a test case to illustrate that as well.
Differential Revision: https://reviews.llvm.org/D44497
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@327646 91177308-0d34-0410-b5e6-96231b3b80d8
If we have an invariant.start with no corresponding invariant.end, then the memory location becomes invariant indefinitely after the invariant.start. As a result, anything dominated by the start is guaranteed to see the value the memory location had when the invariant.start executed.
This patch adds an AvailableInvariants table which tracks the generation a particular memory location became invariant and then uses that information to allow value forwarding that would otherwise be disallowed by potentially aliasing stores. (Reminder: In EarlyCSE everything clobbers everything by default.)
This should be compatible with the MemorySSA variant, but design is generational. We can and should add first class support for invariant.start within MemorySSA at a later time. I took a quick look at doing so, but probably need some input from a MemorySSA expert.
Differential Revision: https://reviews.llvm.org/D43716
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@327577 91177308-0d34-0410-b5e6-96231b3b80d8
This patch implements Chandler's idea [0] for supporting languages that
require support for infinite loops with side effects, such as Rust, providing
part of a solution to bug 965 [1].
Specifically, it adds an `llvm.sideeffect()` intrinsic, which has no actual
effect, but which appears to optimization passes to have obscure side effects,
such that they don't optimize away loops containing it. It also teaches
several optimization passes to ignore this intrinsic, so that it doesn't
significantly impact optimization in most cases.
As discussed on llvm-dev [2], this patch is the first of two major parts.
The second part, to change LLVM's semantics to have defined behavior
on infinite loops by default, with a function attribute for opting into
potential-undefined-behavior, will be implemented and posted for review in
a separate patch.
[0] http://lists.llvm.org/pipermail/llvm-dev/2015-July/088103.html
[1] https://bugs.llvm.org/show_bug.cgi?id=965
[2] http://lists.llvm.org/pipermail/llvm-dev/2017-October/118632.html
Differential Revision: https://reviews.llvm.org/D38336
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@317729 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
When checking for memory dependencies between calls using MemorySSA,
handle cases where the calls have no MemoryAccess associated with them
because the AA analysis being used has determined that the call does not
read/write memory.
Fixes PR33756
Reviewers: dberlin, davide
Subscribers: mcrosier, llvm-commits, Prazek
Differential Revision: https://reviews.llvm.org/D35317
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@308051 91177308-0d34-0410-b5e6-96231b3b80d8
This way we end up not looking at PHI args already removed.
MemSSA now goes through the updater so we can prune
it to avoid having redundant MemoryPHI arguments, but that
doesn't quite work for the general case.
Discussed with Daniel Berlin, fixes PR33406.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@305409 91177308-0d34-0410-b5e6-96231b3b80d8
When presented with an icmp/select pair, we can end up asking what would happen
if we replaced one constant with another in an instruction. This is a mistake,
while non-constant Values could become a constant, constants cannot change and
trying to do so can lead to completely invalid IR (a GEP referencing a
non-existant field in the original case).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@303580 91177308-0d34-0410-b5e6-96231b3b80d8
EarlyCSE should not just ignore assumes. It should use the fact that its condition is true for all dominated instructions.
Reviewers: sanjoy, reames, apilipenko, anna, skatkov
Reviewed By: reames, sanjoy
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D32482
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@301625 91177308-0d34-0410-b5e6-96231b3b80d8
If a condition is calculated only once, and there are multiple guards on this condition, we should be able
to remove all guards dominated by the first of them. This patch allows EarlyCSE to try to find the condition
of a guard among the known values, and if it is true, remove the guard. Otherwise we keep the guard and
mark its condition as 'true' for future consideration.
Reviewers: sanjoy, reames, apilipenko, skatkov, anna, dberlin
Reviewed By: reames, sanjoy
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D32476
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@301623 91177308-0d34-0410-b5e6-96231b3b80d8
Now that MemorySSA keeps track of whether MemoryUses are optimized, use
getClobberingMemoryAccess() to check MemoryUse memory dependencies since
it should no longer be so expensive.
This is a follow-up change to https://reviews.llvm.org/D25881
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@285080 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
When using MemorySSA, re-optimize MemoryPhis when removing a store since
this may create MemoryPhis with all identical arguments.
Also, when using MemorySSA to check if two MemoryUses are reading from
the same version of the heap, use the defining access instead of calling
getClobberingAccess, since the latter can currently result in many more
AA calls. Once the MemorySSA use optimization tracking changes are
done, we can remove this limitation, which should result in more loads
being CSE'd.
Reviewers: dberlin
Subscribers: mcrosier, llvm-commits
Differential Revision: https://reviews.llvm.org/D25881
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@284984 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Use MemorySSA, if requested, to do less conservative memory dependency
checking.
This change doesn't enable the MemorySSA enhanced EarlyCSE in the
default pipelines, so should be NFC.
Reviewers: dberlin, sanjoy, reames, majnemer
Subscribers: mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D19821
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@280279 91177308-0d34-0410-b5e6-96231b3b80d8
Some instructions may have their uses replaced with a symbolic constant.
However, the instruction may still have side effects which percludes it
from being removed from the function. EarlyCSE treated such an
instruction as if it were removed, resulting in PR28763.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@277114 91177308-0d34-0410-b5e6-96231b3b80d8
Redundant invariant loads can be CSE'ed with very little extra effort
over what early-cse already tracks, so it looks reasonable to make
early-cse handle this case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@272954 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This change teaches EarlyCSE some basic properties of guard intrinsics:
- Guard intrinsics read all memory, but don't write to any memory
- After a guard has executed, the condition it was guarding on can be
assumed to be true
- Guard intrinsics on a constant `true` are no-ops
Reviewers: reames, hfinkel
Subscribers: mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D19578
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@268120 91177308-0d34-0410-b5e6-96231b3b80d8
We take the intersection of overflow flags while CSE'ing.
This permits us to consider two instructions with different overflow
behavior to be replaceable.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@267153 91177308-0d34-0410-b5e6-96231b3b80d8
EarlyCSE had inconsistent behavior with regards to flag'd instructions:
- In some cases, it would pessimize if the available instruction had
different flags by not performing CSE.
- In other cases, it would miscompile if it replaced an instruction
which had no flags with an instruction which has flags.
Fix this by being more consistent with our flag handling by utilizing
andIRFlags.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@267111 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
There are a number of files in the tree which have been accidentally checked in with DOS line endings. Convert these to native line endings.
There are also a few files which have DOS line endings on purpose, and I have set the svn:eol-style property to 'CRLF' on those.
Reviewers: joerg, aaron.ballman
Subscribers: aaron.ballman, sanjoy, dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D15848
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@256707 91177308-0d34-0410-b5e6-96231b3b80d8
Yevgeny Rouban