We have an unfortunate situation in our back end where we have to keep pairs of
functions synchronized. Needless to say that this is not an ideal situation as
it is very difficult to enforce. Even without bugs, it's annoying to have to do
the same thing in two places.
This patch just refactors the code so that the two pairs of those functions that
pertain to printing register operands are unified:
- stripRegisterPrefix() - this just removes the letter prefixes from registers
for the InstrPrinter and AsmPrinter. This patch provides this as a static
member of PPCRegisterInfo
- Handling of PPCII::UseVSXReg - there are 3 places where we do something
special for instructions with that flag set. Each of those places does its
own checking of this flag and implements code customization. Any changes to
how we print/encode VSX/VMX registers require modifying all 3 places. This
patch unifies this into a static function in PPCInstrInfo that returns the
register number adjusted as needed.
Differential revision: https://reviews.llvm.org/D52467
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@343195 91177308-0d34-0410-b5e6-96231b3b80d8
Loosens an assert in getMemRIX16Encoding that restricts DQ-form instructions to
using an immediate, so that we can assemble instructions like lxv/stxv where the
offset is an expression.
Differential Revision: https://reviews.llvm.org/D51122
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@340761 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
* ARM is omitted from this patch because this check appears to expose bugs in this target.
* Mips is omitted from this patch because this check either detects bugs or deliberate
emission of instructions that don't satisfy their predicates. One deliberate
use is the SYNC instruction where the version with an operand is correctly
defined as requiring MIPS32 while the version without an operand is defined
as an alias of 'SYNC 0' and requires MIPS2.
* X86 is omitted from this patch because it doesn't use the tablegen-erated
MCCodeEmitter infrastructure.
Patches for ARM and Mips will follow.
Depends on D25617
Reviewers: tstellarAMD, jmolloy
Subscribers: wdng, jmolloy, aemerson, rengolin, arsenm, jyknight, nemanjai, nhaehnle, tstellarAMD, llvm-commits
Differential Revision: https://reviews.llvm.org/D25618
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@287439 91177308-0d34-0410-b5e6-96231b3b80d8
This patch corresponds to review:
https://reviews.llvm.org/D23155
This patch removes the VSHRC register class (based on D20310) and adds
exploitation of the Power9 sub-word integer loads into VSX registers as well
as vector sign extensions.
The new instructions are useful for a few purposes:
Int to Fp conversions of 1 or 2-byte values loaded from memory
Building vectors of 1 or 2-byte integers with values loaded from memory
Storing individual 1 or 2-byte elements from integer vectors
This patch implements all of those uses.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@283190 91177308-0d34-0410-b5e6-96231b3b80d8
This instruction is just a control flow marker - it should not
actually exist in the object file. Unfortunately, nothing catches
it before it gets to AsmPrinter. If integrated assembler is used,
it's considered to be a normal 4-byte instruction, and emitted as
an all-0 word, crashing the program. With external assembler,
a comment is emitted.
Fixed by setting Size to 0 and handling it in MCCodeEmitter - this
means the comment will still be emitted if integrated assembler
is not used.
This broke an ASan test, which has been disabled for a long time
as a result (see the discussion on D19657). We can reenable it
once this lands.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@267943 91177308-0d34-0410-b5e6-96231b3b80d8
The fast isel pass currently emits a COPY_TO_REGCLASS node to convert
from a F4RC to a F8RC register class during conversion of a
floating-point number to integer. There is actually no support in the
common code instruction printers to emit COPY_TO_REGCLASS nodes, so the
PowerPC back-end has special code there to simply ignore
COPY_TO_REGCLASS.
This is correct *if and only if* the source and destination registers of
COPY_TO_REGCLASS are the same (except for the different register class).
But nothing guarantees this to be the case, and if the register
allocator does end up allocating source and destination to different
registers after all, the back-end simply generates incorrect code. I've
included a test case that shows such incorrect code generation.
However, it seems that COPY_TO_REGCLASS is actually not intended to be
used at the MI layer at all. It is used during SelectionDAG, but always
lowered to a plain COPY before emitting MI. Other back-end's fast isel
passes never emit COPY_TO_REGCLASS at all. I suspect it is simply wrong
for the PowerPC back-end to emit it here.
This patch changes the PowerPC back-end to directly emit COPY instead of
COPY_TO_REGCLASS and removes the special handling in the instruction
printers.
Differential Revision: http://reviews.llvm.org/D18605
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@265020 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This is the first patch in the series to migrate Triple's (which are ambiguous)
to TargetTuple's (which aren't).
For the moment, TargetTuple simply passes all requests to the Triple object it
holds. Once it has replaced Triple, it will start to implement the interface in
a more suitable way.
This change makes some changes to the public C++ API. In particular,
InitMCSubtargetInfo(), createMCRelocationInfo(), and createMCSymbolizer()
now take TargetTuples instead of Triples. The other public C++ API's have
been left as-is for the moment to reduce patch size.
This commit also contains a trivial patch to clang to account for the C++ API
change. Thanks go to Pavel Labath for fixing LLDB for me.
Reviewers: rengolin
Subscribers: jyknight, dschuff, arsenm, rampitec, danalbert, srhines, javed.absar, dsanders, echristo, emaste, jholewinski, tberghammer, ted, jfb, llvm-commits, rengolin
Differential Revision: http://reviews.llvm.org/D10969
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@247692 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This is the first patch in the series to migrate Triple's (which are ambiguous)
to TargetTuple's (which aren't).
For the moment, TargetTuple simply passes all requests to the Triple object it
holds. Once it has replaced Triple, it will start to implement the interface in
a more suitable way.
This change makes some changes to the public C++ API. In particular,
InitMCSubtargetInfo(), createMCRelocationInfo(), and createMCSymbolizer()
now take TargetTuples instead of Triples. The other public C++ API's have
been left as-is for the moment to reduce patch size.
This commit also contains a trivial patch to clang to account for the C++ API
change.
Reviewers: rengolin
Subscribers: jyknight, dschuff, arsenm, rampitec, danalbert, srhines, javed.absar, dsanders, echristo, emaste, jholewinski, tberghammer, ted, jfb, llvm-commits, rengolin
Differential Revision: http://reviews.llvm.org/D10969
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@247683 91177308-0d34-0410-b5e6-96231b3b80d8
The patch is generated using clang-tidy misc-use-override check.
This command was used:
tools/clang/tools/extra/clang-tidy/tool/run-clang-tidy.py \
-checks='-*,misc-use-override' -header-filter='llvm|clang' \
-j=32 -fix -format
http://reviews.llvm.org/D8925
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234679 91177308-0d34-0410-b5e6-96231b3b80d8
update all ports accordingly. Required a couple of small rewrites
in handling subtarget features during creation in PPC.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231861 91177308-0d34-0410-b5e6-96231b3b80d8
My patch r204634 to emit instructions in little-endian format failed to
handle those special cases where we emit a pair of instructions from a
single LLVM MC instructions (like the bl; nop pairs used to implement
the call sequence).
In those cases, we still need to emit the "first" instruction (the one
in the more significant word) first, on both big and little endian,
and not swap them.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211171 91177308-0d34-0410-b5e6-96231b3b80d8
As a first step towards real little-endian code generation, this patch
changes the PowerPC MC layer to actually generate little-endian object
files. This involves passing the little-endian flag through the various
layers, including down to createELFObjectWriter so we actually get basic
little-endian ELF objects, emitting instructions in little-endian order,
and handling fixups and relocations as appropriate for little-endian.
The bulk of the patch is to update most test cases in test/MC/PowerPC
to verify both big- and little-endian encodings. (The only test cases
*not* updated are those that create actual big-endian ABI code, like
the TLS tests.)
Note that while the object files are now little-endian, the generated
code itself is not yet updated, in particular, it still does not adhere
to the ELFv2 ABI.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204634 91177308-0d34-0410-b5e6-96231b3b80d8
As part of the cleanup done to enable the disassembler, the PPC instructions
now have a valid Size description field. This can now be used to replace some
custom logic in a few places to compute instruction sizes.
Patch by David Wiberg!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200623 91177308-0d34-0410-b5e6-96231b3b80d8
The subtarget info is explicitly passed to the EncodeInstruction
method and we should use that subtarget info to influence any
encoding decisions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200350 91177308-0d34-0410-b5e6-96231b3b80d8
Fast-isel generates a COPY_TO_REGCLASS for widening f32 to f64, which
is a nop on PPC64. This is needed to keep the register class system
happy, but on the fast-isel path it is not removed before emit as it
is for DAG select. Ignore this op when emitting instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190795 91177308-0d34-0410-b5e6-96231b3b80d8
This adds support for the last missing construct to parse TLS-related
assembler code:
add 3, 4, symbol@tls
The ADD8TLS currently hard-codes the @tls into the assembler string.
This cannot be handled by the asm parser, since @tls is parsed as
a symbol variant. This patch changes ADD8TLS to have the @tls suffix
printed as symbol variant on output too, which allows us to remove
the isCodeGenOnly marker from ADD8TLS. This in turn means that we
can add a AsmOperand to accept @tls marked symbols on input.
As a side effect, this means that the fixup_ppc_tlsreg fixup type
is no longer necessary and can be merged into fixup_ppc_nofixup.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185692 91177308-0d34-0410-b5e6-96231b3b80d8
Just as with mfocrf, it is also preferable to use mtocrf instead of
mtcrf when only a single CR register is to be written.
Current code however always emits mtcrf. This probably does not matter
when using an external assembler, since the GNU assembler will in fact
automatically replace mtcrf with mtocrf when possible. It does create
inefficient code with the integrated assembler, however.
To fix this, this patch adds MTOCRF/MTOCRF8 instruction patterns and
uses those instead of MTCRF/MTCRF8 everything. Just as done in the
MFOCRF patch committed as 185556, these patterns will be converted
back to MTCRF if MTOCRF is not available on the machine.
As a side effect, this allows to modify the MTCRF pattern to accept
the full range of mask operands for the benefit of the asm parser.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185561 91177308-0d34-0410-b5e6-96231b3b80d8
When accessing just a single CR register, it is always preferable to
use mfocrf instead of mfcr, if the former is available on the CPU.
Current code makes that distinction in many, but not all places
where a single CR register value is retrieved. One missing
location is PPCRegisterInfo::lowerCRSpilling.
To fix this and make this simpler in the future, this patch changes
the bulk of the back-end to always assume mfocrf is available and
simply generate it when needed.
On machines that actually do not support mfocrf, the instruction
is replaced by mfcr at the very end, in EmitInstruction.
This has the additional benefit that we no longer need the
MFCRpseud hack, since before EmitInstruction we always have
a MFOCRF instruction pattern, which already models data flow
as required.
The patch also adds the MFOCRF8 version of the instruction,
which was missing so far.
Except for the PPCRegisterInfo::lowerCRSpilling case, no change
in generated code intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185556 91177308-0d34-0410-b5e6-96231b3b80d8
As part of the global-dynamic and local-dynamic TLS sequences, we need
to use a special form of the call instruction:
bl __tls_get_addr(sym@tlsld)
bl __tls_get_addr(sym@tlsgd)
which generates two fixups. The current implementation of this causes
problems with recognizing this form in the asm parser. To fix this,
this patch reworks operand processing for this special form by using
a single operand to hold both __tls_get_addr and sym@tlsld and defining
a print method to output the above form, and an encoding method to
generate the two fixups.
As a side simplification, the patch replaces the two instruction
patterns BL8_NOP_TLSGD and BL8_NOP_TLSLD by a single BL8_NOP_TLS,
since the patterns already operate in an identical fashion (whether
we have a local-dynamic or global-dynamic symbol is already encoded
in the symbol modifier).
No change in code generation intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185477 91177308-0d34-0410-b5e6-96231b3b80d8
Currently, all instructions taking s16imm operands support symbolic
operands. However, for u16imm operands, we only support actual
immediate integers. This causes the assembler to reject code like
ori %r5, %r5, symbol@l
This patch changes the u16imm operand definition to likewise
accept symbolic operands. In fact, s16imm and u16imm can
share the same encoding routine, now renamed to getImm16Encoding.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184944 91177308-0d34-0410-b5e6-96231b3b80d8
There is currently only limited support for the "absolute" variants
of branch instructions. This patch adds support for the absolute
variants of all branches that are currently otherwise supported.
This requires adding new fixup types so that the correct variant
of relocation type can be selected by the object writer.
While the compiler will continue to usually choose the relative
branch variants, this will allow the asm parser to fully support
the absolute branches, with either immediate (numerical) or
symbolic target addresses.
No change in code generation intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184721 91177308-0d34-0410-b5e6-96231b3b80d8
Someone may want to do something crazy, like replace these objects if they
change or something.
No functionality change intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184175 91177308-0d34-0410-b5e6-96231b3b80d8
This patch implements the equivalent change to r182091/r182092
in the old-style code emitter. Instead of having two separate
16-bit immediate encoding routines depending on the instruction,
this patch introduces a single encoder that checks the machine
operand flags to decide whether the low or high half of a
symbol address is required.
Since now both encoders make no further distinction between
"symbolLo" and "symbolHi", the .td operand can now use a
single getS16ImmEncoding method.
Tested by running the old-style JIT tests on 32-bit Linux.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182097 91177308-0d34-0410-b5e6-96231b3b80d8
Now that fixup_ppc_ha16 and fixup_ppc_lo16 are being treated exactly
the same everywhere, it no longer makes sense to have two fixup types.
This patch merges them both into a single type fixup_ppc_half16,
and renames fixup_ppc_lo16_ds to fixup_ppc_half16ds for consistency.
(The half16 and half16ds names are taken from the description of
relocation types in the PowerPC ABI.)
No change in code generation expected.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182092 91177308-0d34-0410-b5e6-96231b3b80d8
This is the second part of the change to always return "true"
offset values from getPreIndexedAddressParts, tackling the
case of "memrix" type operands.
This is about instructions like LD/STD that only have a 14-bit
field to encode immediate offsets, which are implicitly extended
by two zero bits by the machine, so that in effect we can access
16-bit offsets as long as they are a multiple of 4.
The PowerPC back end currently handles such instructions by
carrying the 14-bit value (as it will get encoded into the
actual machine instructions) in the machine operand fields
for such instructions. This means that those values are
in fact not the true offset, but rather the offset divided
by 4 (and then truncated to an unsigned 14-bit value).
Like in the case fixed in r182012, this makes common code
operations on such offset values not work as expected.
Furthermore, there doesn't really appear to be any strong
reason why we should encode machine operands this way.
This patch therefore changes the encoding of "memrix" type
machine operands to simply contain the "true" offset value
as a signed immediate value, while enforcing the rules that
it must fit in a 16-bit signed value and must also be a
multiple of 4.
This change must be made simultaneously in all places that
access machine operands of this type. However, just about
all those changes make the code simpler; in many cases we
can now just share the same code for memri and memrix
operands.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182032 91177308-0d34-0410-b5e6-96231b3b80d8
Now that applyFixup understands differently-sized fixups, we can define
fixup_ppc_lo16/fixup_ppc_lo16_ds/fixup_ppc_ha16 to properly be 2-byte
fixups, applied at an offset of 2 relative to the start of the
instruction text.
This has the benefit that if we actually need to generate a real
relocation record, its address will come out correctly automatically,
without having to fiddle with the offset in adjustFixupOffset.
Tested on both 64-bit and 32-bit PowerPC, using external and
integrated assembler.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181894 91177308-0d34-0410-b5e6-96231b3b80d8
As pointed out by Jakob, we don't need to maintain a separate
register-numbering table. Instead we should let TableGen generate the table for
us from the information (already present) in PPCRegisterInfo.td.
TRI->getEncodingValue is now used to access register-encoding values.
No functionality change intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178067 91177308-0d34-0410-b5e6-96231b3b80d8
MCTargetDesc/PPCMCCodeEmitter.cpp current has code like:
if (isSVR4ABI() && is64BitMode())
Fixups.push_back(MCFixup::Create(0, MO.getExpr(),
(MCFixupKind)PPC::fixup_ppc_toc16));
else
Fixups.push_back(MCFixup::Create(0, MO.getExpr(),
(MCFixupKind)PPC::fixup_ppc_lo16));
This is a problem for the asm parser, since it requires knowledge of
the ABI / 64-bit mode to be set up. However, more fundamentally,
at this point we shouldn't make such distinctions anyway; in an assembler
file, it always ought to be possible to e.g. generate TOC relocations even
when the main ABI is one that doesn't use TOC.
Fortunately, this is actually completely unnecessary; that code was added
to decide whether to generate TOC relocations, but that information is in
fact already encoded in the VariantKind of the underlying symbol.
This commit therefore merges those fixup types into one, and then decides
which relocation to use based on the VariantKind.
No changes in generated code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178007 91177308-0d34-0410-b5e6-96231b3b80d8
We currently have a duplicated set of call instruction patterns depending
on the ABI to be followed (Darwin vs. Linux). This is a bit odd; while the
different ABIs will result in different instruction sequences, the actual
instructions themselves ought to be independent of the ABI. And in fact it
turns out that the only nontrivial difference between the two sets of
patterns is that in the PPC64 Linux ABI, the instruction used for indirect
calls is marked to take X11 as extra input register (which is indeed used
only with that ABI to hold an incoming environment pointer for nested
functions). However, this does not need to be hard-coded at the .td
pattern level; instead, the C++ code expanding calls can simply add that
use, just like it adds uses for argument registers anyway.
No change in generated code expected.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177735 91177308-0d34-0410-b5e6-96231b3b80d8
for a wider range of GOT entries that can hold thread-relative offsets.
This matches the behavior of GCC, which was not documented in the PPC64 TLS
ABI. The ABI will be updated with the new code sequence.
Former sequence:
ld 9,x@got@tprel(2)
add 9,9,x@tls
New sequence:
addis 9,2,x@got@tprel@ha
ld 9,x@got@tprel@l(9)
add 9,9,x@tls
Note that a linker optimization exists to transform the new sequence into
the shorter sequence when appropriate, by replacing the addis with a nop
and modifying the base register and relocation type of the ld.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170209 91177308-0d34-0410-b5e6-96231b3b80d8
PowerPC target. This is the last of the four models, so we now have
full TLS support.
This is mostly a straightforward extension of the general dynamic model.
I had to use an additional Chain operand to tie ADDIS_DTPREL_HA to the
register copy following ADDI_TLSLD_L; otherwise everything above the
ADDIS_DTPREL_HA appeared dead and was removed.
As before, there are new test cases to test the assembly generation, and
the relocations output during integrated assembly. The expected code
gen sequence can be read in test/CodeGen/PowerPC/tls-ld.ll.
There are a couple of things I think can be done more efficiently in the
overall TLS code, so there will likely be a clean-up patch forthcoming;
but for now I want to be sure the functionality is in place.
Bill
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170003 91177308-0d34-0410-b5e6-96231b3b80d8
