Summary:
Right now, when we encounter a string equality check,
e.g. `if (memcmp(a, b, s) == 0)`, we try to expand to a comparison if `s` is a
small compile-time constant, and fall back on calling `memcmp()` else.
This is sub-optimal because memcmp has to compute much more than
equality.
This patch replaces `memcmp(a, b, s) == 0` by `bcmp(a, b, s) == 0` on platforms
that support `bcmp`.
`bcmp` can be made much more efficient than `memcmp` because equality
compare is trivially parallel while lexicographic ordering has a chain
dependency.
Subscribers: fedor.sergeev, jyknight, ckennelly, gchatelet, llvm-commits
Differential Revision: https://reviews.llvm.org/D56593
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@355672 91177308-0d34-0410-b5e6-96231b3b80d8
Recommit r352791 after tweaking DerivedTypes.h slightly, so that gcc
doesn't choke on it, hopefully.
Original Message:
The FunctionCallee type is effectively a {FunctionType*,Value*} pair,
and is a useful convenience to enable code to continue passing the
result of getOrInsertFunction() through to EmitCall, even once pointer
types lose their pointee-type.
Then:
- update the CallInst/InvokeInst instruction creation functions to
take a Callee,
- modify getOrInsertFunction to return FunctionCallee, and
- update all callers appropriately.
One area of particular note is the change to the sanitizer
code. Previously, they had been casting the result of
`getOrInsertFunction` to a `Function*` via
`checkSanitizerInterfaceFunction`, and storing that. That would report
an error if someone had already inserted a function declaraction with
a mismatching signature.
However, in general, LLVM allows for such mismatches, as
`getOrInsertFunction` will automatically insert a bitcast if
needed. As part of this cleanup, cause the sanitizer code to do the
same. (It will call its functions using the expected signature,
however they may have been declared.)
Finally, in a small number of locations, callers of
`getOrInsertFunction` actually were expecting/requiring that a brand
new function was being created. In such cases, I've switched them to
Function::Create instead.
Differential Revision: https://reviews.llvm.org/D57315
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@352827 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit f47d6b38c7a61d50db4566b02719de05492dcef1 (r352791).
Seems to run into compilation failures with GCC (but not clang, where
I tested it). Reverting while I investigate.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@352800 91177308-0d34-0410-b5e6-96231b3b80d8
The FunctionCallee type is effectively a {FunctionType*,Value*} pair,
and is a useful convenience to enable code to continue passing the
result of getOrInsertFunction() through to EmitCall, even once pointer
types lose their pointee-type.
Then:
- update the CallInst/InvokeInst instruction creation functions to
take a Callee,
- modify getOrInsertFunction to return FunctionCallee, and
- update all callers appropriately.
One area of particular note is the change to the sanitizer
code. Previously, they had been casting the result of
`getOrInsertFunction` to a `Function*` via
`checkSanitizerInterfaceFunction`, and storing that. That would report
an error if someone had already inserted a function declaraction with
a mismatching signature.
However, in general, LLVM allows for such mismatches, as
`getOrInsertFunction` will automatically insert a bitcast if
needed. As part of this cleanup, cause the sanitizer code to do the
same. (It will call its functions using the expected signature,
however they may have been declared.)
Finally, in a small number of locations, callers of
`getOrInsertFunction` actually were expecting/requiring that a brand
new function was being created. In such cases, I've switched them to
Function::Create instead.
Differential Revision: https://reviews.llvm.org/D57315
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@352791 91177308-0d34-0410-b5e6-96231b3b80d8
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@351636 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
In several places in the code we use the following pattern:
if (hasUnaryFloatFn(&TLI, Ty, LibFunc_tan, LibFunc_tanf, LibFunc_tanl)) {
[...]
Value *Res = emitUnaryFloatFnCall(X, TLI.getName(LibFunc_tan), B, Attrs);
[...]
}
In short, we check if there is a lib-function for a certain type, and then
we _always_ fetch the name of the "double" version of the lib function and
construct a call to the appropriate function, that we just checked exists,
using that "double" name as a basis.
This is of course a problem in cases where the target doesn't support the
"double" version, but e.g. only the "float" version.
In that case TLI.getName(LibFunc_tan) returns "", and
emitUnaryFloatFnCall happily appends an "f" to "", and we erroneously end
up with a call to a function called "f".
To solve this, the above pattern is changed to
if (hasUnaryFloatFn(&TLI, Ty, LibFunc_tan, LibFunc_tanf, LibFunc_tanl)) {
[...]
Value *Res = emitUnaryFloatFnCall(X, &TLI, LibFunc_tan, LibFunc_tanf,
LibFunc_tanl, B, Attrs);
[...]
}
I.e instead of first fetching the name of the "double" version and then
letting emitUnaryFloatFnCall() add the final "f" or "l", we let
emitUnaryFloatFnCall() fetch the right name from TLI.
Reviewers: eli.friedman, efriedma
Reviewed By: efriedma
Subscribers: efriedma, bjope, llvm-commits
Differential Revision: https://reviews.llvm.org/D53370
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@344725 91177308-0d34-0410-b5e6-96231b3b80d8
This is still unsafe for long double, we will transform things into tanl
even if tanl is for another type. But that's for someone else to fix.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@342542 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: If file stream arg is not captured and source is fopen, we could replace IO calls by unlocked IO ("_unlocked" function variants) to gain better speed,
Reviewers: efriedma, RKSimon, spatel, sanjoy, hfinkel, majnemer, lebedev.ri, rja
Reviewed By: rja
Subscribers: rja, srhines, efriedma, lebedev.ri, llvm-commits
Differential Revision: https://reviews.llvm.org/D45736
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@332452 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: If file stream arg is not captured and source is fopen, we could replace IO calls by unlocked IO ("_unlocked" function variants) to gain better speed,
Reviewers: efriedma, RKSimon, spatel, sanjoy, hfinkel, majnemer
Subscribers: lebedev.ri, llvm-commits
Differential Revision: https://reviews.llvm.org/D45736
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@331002 91177308-0d34-0410-b5e6-96231b3b80d8
With -fno-plt, for example, calls to printf when getting converted to puts
still use the PLT. This patch checks for the metadata "RtLibUseGOT" and
annotates the declaration with the right attributes.
Differential Revision: https://reviews.llvm.org/D45180
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@329768 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This allows strlen to be moved out of the loop in case its argument is
not modified in the loop in LICM.
Reviewers: hfinkel, davide, sanjoy, dberlin
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D34323
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@305641 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Do three things to help with that:
- Add AttributeList::FirstArgIndex, which is an enumerator currently set
to 1. It allows us to change the indexing scheme with fewer changes.
- Add addParamAttr/removeParamAttr. This just shortens addAttribute call
sites that would otherwise need to spell out FirstArgIndex.
- Remove some attribute-specific getters and setters from Function that
take attribute list indices. Most of these were only used from
BuildLibCalls, and doesNotAlias was only used to test or set if the
return value is malloc-like.
I'm happy to split the patch, but I think they are probably easier to
review when taken together.
This patch should be NFC, but it sets the stage to change the indexing
scheme to this, which is more convenient when indexing into an array:
0: func attrs
1: retattrs
2...: arg attrs
Reviewers: chandlerc, pete, javed.absar
Subscribers: david2050, llvm-commits
Differential Revision: https://reviews.llvm.org/D32811
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@302060 91177308-0d34-0410-b5e6-96231b3b80d8
From a user prospective, it forces the use of an annoying nullptr to mark the end of the vararg, and there's not type checking on the arguments.
The variadic template is an obvious solution to both issues.
Differential Revision: https://reviews.llvm.org/D31070
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@299949 91177308-0d34-0410-b5e6-96231b3b80d8
Module::getOrInsertFunction is using C-style vararg instead of
variadic templates.
From a user prospective, it forces the use of an annoying nullptr
to mark the end of the vararg, and there's not type checking on the
arguments. The variadic template is an obvious solution to both
issues.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@299925 91177308-0d34-0410-b5e6-96231b3b80d8
Module::getOrInsertFunction is using C-style vararg instead of
variadic templates.
From a user prospective, it forces the use of an annoying nullptr
to mark the end of the vararg, and there's not type checking on the
arguments. The variadic template is an obvious solution to both
issues.
Patch by: Serge Guelton <serge.guelton@telecom-bretagne.eu>
Differential Revision: https://reviews.llvm.org/D31070
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@299699 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This class is a list of AttributeSetNodes corresponding the function
prototype of a call or function declaration. This class used to be
called ParamAttrListPtr, then AttrListPtr, then AttributeSet. It is
typically accessed by parameter and return value index, so
"AttributeList" seems like a more intuitive name.
Rename AttributeSetImpl to AttributeListImpl to follow suit.
It's useful to rename this class so that we can rename AttributeSetNode
to AttributeSet later. AttributeSet is the set of attributes that apply
to a single function, argument, or return value.
Reviewers: sanjoy, javed.absar, chandlerc, pete
Reviewed By: pete
Subscribers: pete, jholewinski, arsenm, dschuff, mehdi_amini, jfb, nhaehnle, sbc100, void, llvm-commits
Differential Revision: https://reviews.llvm.org/D31102
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@298393 91177308-0d34-0410-b5e6-96231b3b80d8
When InstCombine calls into SimplifyLibCalls and it createa putChar calls, we don't infer the attributes. And since SimplifyLibCalls doesn't use InstCombine's IRBuilder the calls doesn't end up in the worklist on this iteration of InstCombine. So it gets picked up on the next iteration where it causes an IR change. This of course causes InstCombine to run another iteration.
So this patch just gets the attributes right the first time. We already did this for puts and some other libcalls.
Differential Revision: https://reviews.llvm.org/D31094
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@298171 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The LibFunc::Func enum holds enumerators named for libc functions.
Unfortunately, there are real situations, including libc implementations, where
function names are actually macros (musl uses "#define fopen64 fopen", for
example; any other transitively visible macro would have similar effects).
Strictly speaking, a conforming C++ Standard Library should provide any such
macros as functions instead (via <cstdio>). However, there are some "library"
functions which are not part of the standard, and thus not subject to this
rule (fopen64, for example). So, in order to be both portable and consistent,
the enum should not use the bare function names.
The old enum naming used a namespace LibFunc and an enum Func, with bare
enumerators. This patch changes LibFunc to be an enum with enumerators prefixed
with "LibFFunc_". (Unfortunately, a scoped enum is not sufficient to override
macros.)
There are additional changes required in clang.
Reviewers: rsmith
Subscribers: mehdi_amini, mzolotukhin, nemanjai, llvm-commits
Differential Revision: https://reviews.llvm.org/D28476
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@292848 91177308-0d34-0410-b5e6-96231b3b80d8
Patch by Sunita Marathe
Third try, now following fixes to MSan to handle mempcy in such a way that this commit won't break the MSan buildbots. (Thanks, Evegenii!)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@277189 91177308-0d34-0410-b5e6-96231b3b80d8
Now the pass is just a tiny wrapper around the util. This lets us reuse
the logic elsewhere (done here for BuildLibCalls) instead of duplicating
it.
The next step is to have something like getOrInsertLibFunc that also
sets the attributes.
Differential Revision: http://reviews.llvm.org/D19470
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@267759 91177308-0d34-0410-b5e6-96231b3b80d8
Note: There are no uses of these functions outside of
SimplifyLibCalls, so they could be static functions in
that file.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@258172 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Now that the DataLayout is a mandatory part of the module, let's start
cleaning the codebase. This patch is a first attempt at doing that.
This patch is not exactly NFC as for instance some places were passing
a nullptr instead of the DataLayout, possibly just because there was a
default value on the DataLayout argument to many functions in the API.
Even though it is not purely NFC, there is no change in the
validation.
I turned as many pointer to DataLayout to references, this helped
figuring out all the places where a nullptr could come up.
I had initially a local version of this patch broken into over 30
independant, commits but some later commit were cleaning the API and
touching part of the code modified in the previous commits, so it
seemed cleaner without the intermediate state.
Test Plan:
Reviewers: echristo
Subscribers: llvm-commits
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231740 91177308-0d34-0410-b5e6-96231b3b80d8
While the term "Target" is in the name, it doesn't really have to do
with the LLVM Target library -- this isn't an abstraction which LLVM
targets generally need to implement or extend. It has much more to do
with modeling the various runtime libraries on different OSes and with
different runtime environments. The "target" in this sense is the more
general sense of a target of cross compilation.
This is in preparation for porting this analysis to the new pass
manager.
No functionality changed, and updates inbound for Clang and Polly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@226078 91177308-0d34-0410-b5e6-96231b3b80d8
