Summary:
Enable these passes for CFI and WPD in ThinLTO and LTO with the new pass
manager. Add a couple of tests for both PMs based on the clang tests
tools/clang/test/CodeGen/thinlto-distributed-cfi*.ll, but just test
through llvm-lto2 and not with distributed ThinLTO.
Reviewers: pcc
Subscribers: mehdi_amini, inglorion, eraman, steven_wu, dexonsmith, llvm-commits
Differential Revision: https://reviews.llvm.org/D49429
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@337461 91177308-0d34-0410-b5e6-96231b3b80d8
This is a simple implementation of the unroll-and-jam classical loop
optimisation.
The basic idea is that we take an outer loop of the form:
for i..
ForeBlocks(i)
for j..
SubLoopBlocks(i, j)
AftBlocks(i)
Instead of doing normal inner or outer unrolling, we unroll as follows:
for i... i+=2
ForeBlocks(i)
ForeBlocks(i+1)
for j..
SubLoopBlocks(i, j)
SubLoopBlocks(i+1, j)
AftBlocks(i)
AftBlocks(i+1)
Remainder Loop
So we have unrolled the outer loop, then jammed the two inner loops into
one. This can lead to a simpler inner loop if memory accesses can be shared
between the now jammed loops.
To do this we have to prove that this is all safe, both for the memory
accesses (using dependence analysis) and that ForeBlocks(i+1) can move before
AftBlocks(i) and SubLoopBlocks(i, j).
Differential Revision: https://reviews.llvm.org/D41953
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@336062 91177308-0d34-0410-b5e6-96231b3b80d8
and diretory.
Also cleans up all the associated naming to be consistent and removes
the public access to the pass ID which was unused in LLVM.
Also runs clang-format over parts that changed, which generally cleans
up a bunch of formatting.
This is in preparation for doing some internal cleanups to the pass.
Differential Revision: https://reviews.llvm.org/D47352
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@336028 91177308-0d34-0410-b5e6-96231b3b80d8
This pass is being added in order to make the information available to BasicAA,
which can't do caching of this information itself, but possibly this information
may be useful for other passes.
Incorporates code based on Daniel Berlin's implementation of Tarjan's algorithm.
Differential Revision: https://reviews.llvm.org/D47893
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@335857 91177308-0d34-0410-b5e6-96231b3b80d8
=== Generating the CG Profile ===
The CGProfile module pass simply gets the block profile count for each BB and scans for call instructions. For each call instruction it adds an edge from the current function to the called function with the current BB block profile count as the weight.
After scanning all the functions, it generates an appending module flag containing the data. The format looks like:
```
!llvm.module.flags = !{!0}
!0 = !{i32 5, !"CG Profile", !1}
!1 = !{!2, !3, !4} ; List of edges
!2 = !{void ()* @a, void ()* @b, i64 32} ; Edge from a to b with a weight of 32
!3 = !{void (i1)* @freq, void ()* @a, i64 11}
!4 = !{void (i1)* @freq, void ()* @b, i64 20}
```
Differential Revision: https://reviews.llvm.org/D48105
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@335794 91177308-0d34-0410-b5e6-96231b3b80d8
loop-cleanup passes at the beginning of the loop pass pipeline, and
re-enqueue loops after even trivial unswitching.
This will allow us to much more consistently avoid simplifying code
while doing trivial unswitching. I've also added a test case that
specifically shows effective iteration using this technique.
I've unconditionally updated the new PM as that is always using the
SimpleLoopUnswitch pass, and I've made the pipeline changes for the old
PM conditional on using this new unswitch pass. I added a bunch of
comments to the loop pass pipeline in the old PM to make it more clear
what is going on when reviewing.
Hopefully this will unblock doing *partial* unswitching instead of just
full unswitching.
Differential Revision: https://reviews.llvm.org/D47408
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@333493 91177308-0d34-0410-b5e6-96231b3b80d8
This is a simple implementation of the unroll-and-jam classical loop
optimisation.
The basic idea is that we take an outer loop of the form:
for i..
ForeBlocks(i)
for j..
SubLoopBlocks(i, j)
AftBlocks(i)
Instead of doing normal inner or outer unrolling, we unroll as follows:
for i... i+=2
ForeBlocks(i)
ForeBlocks(i+1)
for j..
SubLoopBlocks(i, j)
SubLoopBlocks(i+1, j)
AftBlocks(i)
AftBlocks(i+1)
Remainder
So we have unrolled the outer loop, then jammed the two inner loops into
one. This can lead to a simpler inner loop if memory accesses can be shared
between the now-jammed loops.
To do this we have to prove that this is all safe, both for the memory
accesses (using dependence analysis) and that ForeBlocks(i+1) can move before
AftBlocks(i) and SubLoopBlocks(i, j).
Differential Revision: https://reviews.llvm.org/D41953
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@333358 91177308-0d34-0410-b5e6-96231b3b80d8
The plan had always been to move towards using this rather than so much
in-pass simplification within the loop pipeline, but we never got around
to it.... until only a couple months after it was removed due to disuse.
=/
This commit is just a pure revert of the removal. I will add tests and
do some basic cleanup in follow-up commits. Then I'll wire it into the
loop pass pipeline.
Differential Revision: https://reviews.llvm.org/D47353
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@333250 91177308-0d34-0410-b5e6-96231b3b80d8
We've been running doxygen with the autobrief option for a couple of
years now. This makes the \brief markers into our comments
redundant. Since they are a visual distraction and we don't want to
encourage more \brief markers in new code either, this patch removes
them all.
Patch produced by
for i in $(git grep -l '\\brief'); do perl -pi -e 's/\\brief //g' $i & done
Differential Revision: https://reviews.llvm.org/D46290
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@331272 91177308-0d34-0410-b5e6-96231b3b80d8
There are two nontrivial details here:
* Loop structure update interface is quite different with new pass manager,
so the code to add new loops was factored out
* BranchProbabilityInfo is not a loop analysis, so it can not be just getResult'ed from
within the loop pass. It cant even be queried through getCachedResult as LoopCanonicalization
sequence (e.g. LoopSimplify) might invalidate BPI results.
Complete solution for BPI will likely take some time to discuss and figure out,
so for now this was partially solved by making BPI optional in IRCE
(skipping a couple of profitability checks if it is absent).
Most of the IRCE tests got their corresponding new-pass-manager variant enabled.
Only two of them depend on BPI, both marked with TODO, to be turned on when BPI
starts being available for loop passes.
Reviewers: chandlerc, mkazantsev, sanjoy, asbirlea
Reviewed By: mkazantsev
Differential Revision: https://reviews.llvm.org/D43795
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@327619 91177308-0d34-0410-b5e6-96231b3b80d8
LoopInstSimplify is unused and untested. Reading through the commit
history the pass also seems to have a high maintenance burden.
It would be best to retire the pass for now. It should be easy to
recover if we need something similar in the future.
Differential Revision: https://reviews.llvm.org/D44053
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@327329 91177308-0d34-0410-b5e6-96231b3b80d8
Combine expression patterns to form expressions with fewer, simple instructions.
This pass does not modify the CFG.
For example, this pass reduce width of expressions post-dominated by TruncInst
into smaller width when applicable.
It differs from instcombine pass in that it contains pattern optimization that
requires higher complexity than the O(1), thus, it should run fewer times than
instcombine pass.
Differential Revision: https://reviews.llvm.org/D38313
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@323321 91177308-0d34-0410-b5e6-96231b3b80d8
This applies to most pipelines except the LTO and ThinLTO backend
actions - it is for use at the beginning of the overall pipeline.
This extension point will be used to add the GCOV pass when enabled in
Clang.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@323166 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This pass synthesizes function entry counts by traversing the callgraph
and using the relative block frequencies of the callsites. The intended
use of these counts is in inlining to determine hot/cold callsites in
the absence of profile information.
The pass is split into two files with the code that propagates the
counts in a callgraph in a Utils file. I plan to add support for
propagation in the thinlto link phase and the propagation code will be
shared and hence this split. I did not add support to the old PM since
hot callsite determination in inlining is not possible in old PM
(although we could use hot callee heuristic with synthetic counts in the
old PM it is not worth the effort tuning it)
Reviewers: davidxl, silvas
Subscribers: mgorny, mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D41604
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@322110 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
New pass manager driver passes DebugPM (-debug-pass-manager) flag into
individual PassManager constructors in order to enable debug logging.
FunctionToLoopPassAdaptor has its own internal LoopCanonicalizationPM
which never gets its debug logging enabled and that means canonicalization
passes like LoopSimplify are never present in -debug-pass-manager output.
Extending FunctionToLoopPassAdaptor's constructor and
createFunctionToLoopPassAdaptor wrapper with an optional
boolean DebugLogging argument.
Passing debug-logging flags there as appropriate.
Reviewers: chandlerc, davide
Reviewed By: davide
Subscribers: mehdi_amini, eraman, llvm-commits, JDevlieghere
Differential Revision: https://reviews.llvm.org/D41586
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@321548 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The port is nearly straightforward.
The only complication is related to the analyses handling,
since one of the analyses used in this module pass is domtree,
which is a function analysis. That requires asking for the results
of each function and disallows a single interface for run-on-module
pass action.
Decided to copy-paste the main body of this pass.
Most of its code is requesting analyses anyway, so not that much
of a copy-paste.
The rest of the code movement is to transform all the implementation
helper functions like stripNonValidData into non-member statics.
Extended all the related LLVM tests with new-pass-manager use.
No failures.
Reviewers: sanjoy, anna, reames
Reviewed By: anna
Subscribers: skatkov, llvm-commits
Differential Revision: https://reviews.llvm.org/D41162
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@320796 91177308-0d34-0410-b5e6-96231b3b80d8
The core idea is to (re-)introduce some redundancies where their cost is
hidden by the cost of materializing immediates for constant operands of
PHI nodes. When the cost of the redundancies is covered by this,
avoiding materializing the immediate has numerous benefits:
1) Less register pressure
2) Potential for further folding / combining
3) Potential for more efficient instructions due to immediate operand
As a motivating example, consider the remarkably different cost on x86
of a SHL instruction with an immediate operand versus a register
operand.
This pattern turns up surprisingly frequently, but is somewhat rarely
obvious as a significant performance problem.
The pass is entirely target independent, but it does rely on the target
cost model in TTI to decide when to speculate things around the PHI
node. I've included x86-focused tests, but any target that sets up its
immediate cost model should benefit from this pass.
There is probably more that can be done in this space, but the pass
as-is is enough to get some important performance on our internal
benchmarks, and should be generally performance neutral, but help with
more extensive benchmarking is always welcome.
One awkward part is that this pass has to be scheduled after
*everything* that can eliminate these kinds of redundancies. This
includes SimplifyCFG, GVN, etc. I'm open to suggestions about better
places to put this. We could in theory make it part of the codegen pass
pipeline, but there doesn't really seem to be a good reason for that --
it isn't "lowering" in any sense and only relies on pretty standard cost
model based TTI queries, so it seems to fit well with the "optimization"
pipeline model. Still, further thoughts on the pipeline position are
welcome.
I've also only implemented this in the new pass manager. If folks are
very interested, I can try to add it to the old PM as well, but I didn't
really see much point (my use case is already switched over to the new
PM).
I've tested this pretty heavily without issue. A wide range of
benchmarks internally show no change outside the noise, and I don't see
any significant changes in SPEC either. However, the size class
computation in tcmalloc is substantially improved by this, which turns
into a 2% to 4% win on the hottest path through tcmalloc for us, so
there are definitely important cases where this is going to make
a substantial difference.
Differential revision: https://reviews.llvm.org/D37467
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319164 91177308-0d34-0410-b5e6-96231b3b80d8
This is a recommit of r316869 which was speculatively reverted with r317444 and
subsequently shown to not be the cause of PR35210. That crash should be fixed
after r318237.
Original commit message:
The old PM sets the options of what used to be known as "latesimplifycfg" on the
instantiation after the vectorizers have run, so that's what we'redoing here.
FWIW, there's a later SimplifyCFGPass instantiation in both PMs where we do not
set the "late" options. I'm not sure if that's intentional or not.
Differential Revision: https://reviews.llvm.org/D39407
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@318299 91177308-0d34-0410-b5e6-96231b3b80d8
Clang implements the -finstrument-functions flag inherited from GCC, which
inserts calls to __cyg_profile_func_{enter,exit} on function entry and exit.
This is useful for getting a trace of how the functions in a program are
executed. Normally, the calls remain even if a function is inlined into another
function, but it is useful to be able to turn this off for users who are
interested in a lower-level trace, i.e. one that reflects what functions are
called post-inlining. (We use this to generate link order files for Chromium.)
LLVM already has a pass for inserting similar instrumentation calls to
mcount(), which it does after inlining. This patch renames and extends that
pass to handle calls both to mcount and the cygprofile functions, before and/or
after inlining as controlled by function attributes.
Differential Revision: https://reviews.llvm.org/D39287
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@318195 91177308-0d34-0410-b5e6-96231b3b80d8
Registers it and everything, updates all the references, etc.
Next patch will add support to Clang's `-fexperimental-new-pass-manager`
path to actually enable BoundsChecking correctly.
Differential Revision: https://reviews.llvm.org/D39084
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@318128 91177308-0d34-0410-b5e6-96231b3b80d8
This recommit r317351 after fixing a buildbot failure.
Original commit message:
Summary:
This change add a pass which tries to split a call-site to pass
more constrained arguments if its argument is predicated in the control flow
so that we can expose better context to the later passes (e.g, inliner, jump
threading, or IPA-CP based function cloning, etc.).
As of now we support two cases :
1) If a call site is dominated by an OR condition and if any of its arguments
are predicated on this OR condition, try to split the condition with more
constrained arguments. For example, in the code below, we try to split the
call site since we can predicate the argument (ptr) based on the OR condition.
Split from :
if (!ptr || c)
callee(ptr);
to :
if (!ptr)
callee(null ptr) // set the known constant value
else if (c)
callee(nonnull ptr) // set non-null attribute in the argument
2) We can also split a call-site based on constant incoming values of a PHI
For example,
from :
BB0:
%c = icmp eq i32 %i1, %i2
br i1 %c, label %BB2, label %BB1
BB1:
br label %BB2
BB2:
%p = phi i32 [ 0, %BB0 ], [ 1, %BB1 ]
call void @bar(i32 %p)
to
BB0:
%c = icmp eq i32 %i1, %i2
br i1 %c, label %BB2-split0, label %BB1
BB1:
br label %BB2-split1
BB2-split0:
call void @bar(i32 0)
br label %BB2
BB2-split1:
call void @bar(i32 1)
br label %BB2
BB2:
%p = phi i32 [ 0, %BB2-split0 ], [ 1, %BB2-split1 ]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@317362 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This change add a pass which tries to split a call-site to pass
more constrained arguments if its argument is predicated in the control flow
so that we can expose better context to the later passes (e.g, inliner, jump
threading, or IPA-CP based function cloning, etc.).
As of now we support two cases :
1) If a call site is dominated by an OR condition and if any of its arguments
are predicated on this OR condition, try to split the condition with more
constrained arguments. For example, in the code below, we try to split the
call site since we can predicate the argument (ptr) based on the OR condition.
Split from :
if (!ptr || c)
callee(ptr);
to :
if (!ptr)
callee(null ptr) // set the known constant value
else if (c)
callee(nonnull ptr) // set non-null attribute in the argument
2) We can also split a call-site based on constant incoming values of a PHI
For example,
from :
BB0:
%c = icmp eq i32 %i1, %i2
br i1 %c, label %BB2, label %BB1
BB1:
br label %BB2
BB2:
%p = phi i32 [ 0, %BB0 ], [ 1, %BB1 ]
call void @bar(i32 %p)
to
BB0:
%c = icmp eq i32 %i1, %i2
br i1 %c, label %BB2-split0, label %BB1
BB1:
br label %BB2-split1
BB2-split0:
call void @bar(i32 0)
br label %BB2
BB2-split1:
call void @bar(i32 1)
br label %BB2
BB2:
%p = phi i32 [ 0, %BB2-split0 ], [ 1, %BB2-split1 ]
Reviewers: davidxl, huntergr, chandlerc, mcrosier, eraman, davide
Reviewed By: davidxl
Subscribers: sdesmalen, ashutosh.nema, fhahn, mssimpso, aemerson, mgorny, mehdi_amini, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D39137
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@317351 91177308-0d34-0410-b5e6-96231b3b80d8
The old PM sets the options of what used to be known as "latesimplifycfg" on the
instantiation after the vectorizers have run, so that's what we'redoing here.
FWIW, there's a later SimplifyCFGPass instantiation in both PMs where we do not
set the "late" options. I'm not sure if that's intentional or not.
Differential Revision: https://reviews.llvm.org/D39407
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@316869 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds a new pass for attaching !callees metadata to indirect call
sites. The pass propagates values to call sites by performing an IPSCCP-like
analysis using the generic sparse propagation solver. For indirect call sites
having a small set of possible callees, the attached metadata indicates what
those callees are. The metadata can be used to facilitate optimizations like
intersecting the function attributes of the possible callees, refining the call
graph, performing indirect call promotion, etc.
Differential Revision: https://reviews.llvm.org/D37355
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@316576 91177308-0d34-0410-b5e6-96231b3b80d8
This is the same exact change we did for the current pass manager
in rL314997, but the new pass manager pipeline already happened
to run GlobalOpt after the inliner, so we just insert a run of
GDCE here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@315003 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: In SamplePGO ThinLTO compile phase, we will not invoke ICP as it may introduce confusion to the 2nd annotation. This patch extracted that logic and makes it clearer before profile annotation. In the mean time, we need to make function importing process both inlined callsites as well as not promoted indirect callsites.
Reviewers: tejohnson
Reviewed By: tejohnson
Subscribers: sanjoy, mehdi_amini, llvm-commits, inglorion
Differential Revision: https://reviews.llvm.org/D38094
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@314619 91177308-0d34-0410-b5e6-96231b3b80d8
This is intended to be a superset of the functionality from D31037 (EarlyCSE) but implemented
as an independent pass, so there's no stretching of scope and feature creep for an existing pass.
I also proposed a weaker version of this for SimplifyCFG in D30910. And I initially had almost
this same functionality as an addition to CGP in the motivating example of PR31028:
https://bugs.llvm.org/show_bug.cgi?id=31028
The advantage of positioning this ahead of SimplifyCFG in the pass pipeline is that it can allow
more flattening. But it needs to be after passes (InstCombine) that could sink a div/rem and
undo the hoisting that is done here.
Decomposing remainder may allow removing some code from the backend (PPC and possibly others).
Differential Revision: https://reviews.llvm.org/D37121
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@312862 91177308-0d34-0410-b5e6-96231b3b80d8
printing techniques with a DEBUG_TYPE controlling them.
It was a mistake to start re-purposing the pass manager `DebugLogging`
variable for generic debug printing -- those logs are intended to be
very minimal and primarily used for testing. More detailed and
comprehensive logging doesn't make sense there (it would only make for
brittle tests).
Moreover, we kept forgetting to propagate the `DebugLogging` variable to
various places making it also ineffective and/or unavailable. Switching
to `DEBUG_TYPE` makes this a non-issue.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@310695 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: Part of r310296 will disable PGOIndirectCallPromotion in ThinLTO backend if PGOOpt is None. However, as PGOOpt is not passed down to ThinLTO backend for instrumentation based PGO, that change would actually disable ICP entirely in ThinLTO backend, making it behave differently in instrumentation PGO mode. This change reverts that change, and only disable ICP there when it is SamplePGO.
Reviewers: davidxl
Reviewed By: davidxl
Subscribers: sanjoy, mehdi_amini, eraman, llvm-commits
Differential Revision: https://reviews.llvm.org/D36566
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@310550 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: SampleProfileLoader pass do need to happen after some early cleanup passes so that inlining can happen correctly inside the SampleProfileLoader pass.
Reviewers: chandlerc, davidxl, tejohnson
Reviewed By: chandlerc, tejohnson
Subscribers: sanjoy, mehdi_amini, eraman, llvm-commits
Differential Revision: https://reviews.llvm.org/D36333
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@310296 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This is largely NFC*, in preparation for utilizing ProfileSummaryInfo
and BranchFrequencyInfo analyses. In this patch I am only doing the
splitting for the New PM, but I can do the same for the legacy PM as
a follow-on if this looks good.
*Not NFC since for partial unrolling we lose the updates done to the
loop traversal (adding new sibling and child loops) - according to
Chandler this is not very useful for partial unrolling, but it also
means that the debugging flag -unroll-revisit-child-loops no longer
works for partial unrolling.
Reviewers: chandlerc
Subscribers: mehdi_amini, mzolotukhin, eraman, llvm-commits
Differential Revision: https://reviews.llvm.org/D36157
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@309886 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: In ThinLTO backend compile, OPTOptions are not set so that the ICP in ThinLTO backend does not know if it is a SamplePGO build, in which profile count needs to be annotated directly on call instructions. This patch cleaned up the PGOOptions handling logic and passes down PGOOptions to ThinLTO backend.
Reviewers: chandlerc, tejohnson, davidxl
Reviewed By: chandlerc
Subscribers: sanjoy, llvm-commits, mehdi_amini
Differential Revision: https://reviews.llvm.org/D36052
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@309780 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Now that SamplePGOSupport is part of PGOOpt, there are several places that need tweaking:
1. AddDiscriminator pass should *not* be invoked at ThinLTOBackend (as it's already invoked in the PreLink phase)
2. addPGOInstrPasses should only be invoked when either ProfileGenFile or ProfileUseFile is non-empty.
3. SampleProfileLoaderPass should only be invoked when SampleProfileFile is non-empty.
4. PGOIndirectCallPromotion should only be invoked in ProfileUse phase, or in ThinLTOBackend of SamplePGO.
Reviewers: chandlerc, tejohnson, davidxl
Reviewed By: chandlerc
Subscribers: sanjoy, mehdi_amini, eraman, llvm-commits
Differential Revision: https://reviews.llvm.org/D36040
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@309478 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: The new PM needs to invoke add-discriminator pass when building with -fdebug-info-for-profiling.
Reviewers: chandlerc, davidxl
Reviewed By: chandlerc
Subscribers: sanjoy, llvm-commits
Differential Revision: https://reviews.llvm.org/D35744
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@309121 91177308-0d34-0410-b5e6-96231b3b80d8
