MSA stores and loads to the stack are more likely to require an
emergency GPR spill slot due to the smaller offsets available
with those instructions.
Handle this by overestimating the size of the stack by determining
the largest offset presuming that all callee save registers are
spilled and accounting of incoming arguments when determining
whether an emergency spill slot is required.
Reviewers: atanasyan
Differential Revision: https://reviews.llvm.org/D39056
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@317204 91177308-0d34-0410-b5e6-96231b3b80d8
1. RegisterClass::getSize() is split into two functions:
- TargetRegisterInfo::getRegSizeInBits(const TargetRegisterClass &RC) const;
- TargetRegisterInfo::getSpillSize(const TargetRegisterClass &RC) const;
2. RegisterClass::getAlignment() is replaced by:
- TargetRegisterInfo::getSpillAlignment(const TargetRegisterClass &RC) const;
This will allow making those values depend on subtarget features in the
future.
Differential Revision: https://reviews.llvm.org/D31783
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@301221 91177308-0d34-0410-b5e6-96231b3b80d8
This will become necessary in a subsequent change to make this method
merge adjacent stack adjustments, i.e. it might erase the previous
and/or next instruction.
It also greatly simplifies the calls to this function from Prolog-
EpilogInserter. Previously, that had a bunch of logic to resume iteration
after the call; now it just continues with the returned iterator.
Note that this changes the behaviour of PEI a little. Previously,
it attempted to re-visit the new instruction created by
eliminateCallFramePseudoInstr(). That code was added in r36625,
but I can't see any reason for it: the new instructions will obviously
not be pseudo instructions, they will not have FrameIndex operands,
and we have already accounted for the stack adjustment.
Differential Revision: http://reviews.llvm.org/D18627
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@265036 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
With this change we are able to realign the stack dynamically, whenever it
contains objects with alignment requirements that are larger than the
alignment specified from the given ABI.
We have to use the $fp register as the frame pointer when we perform
dynamic stack realignment. In complex stack frames, with variably-sized
objects, we reserve additionally the callee-saved register $s7 as the
base pointer in order to reference locals.
Reviewers: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8633
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238829 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Avoid duplicate code in Mips16FrameLowering and MipsSEFrameLowering by
providing an implementation of the eliminateCallFramePseudoInstr()
function from their base class.
Depends on D8640.
Reviewers: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8641
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233909 91177308-0d34-0410-b5e6-96231b3b80d8
calls that don't take a Function argument from Mips. Notable
exceptions: the AsmPrinter and MipsTargetObjectFile. The
latter needs to be fixed, and the former will be fixed when the
general AsmPrinter changes happen.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227512 91177308-0d34-0410-b5e6-96231b3b80d8
shorter/easier and have the DAG use that to do the same lookup. This
can be used in the future for TargetMachine based caching lookups from
the MachineFunction easily.
Update the MIPS subtarget switching machinery to update this pointer
at the same time it runs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@214838 91177308-0d34-0410-b5e6-96231b3b80d8
into their new header subdirectory: include/llvm/IR. This matches the
directory structure of lib, and begins to correct a long standing point
of file layout clutter in LLVM.
There are still more header files to move here, but I wanted to handle
them in separate commits to make tracking what files make sense at each
layer easier.
The only really questionable files here are the target intrinsic
tablegen files. But that's a battle I'd rather not fight today.
I've updated both CMake and Makefile build systems (I think, and my
tests think, but I may have missed something).
I've also re-sorted the includes throughout the project. I'll be
committing updates to Clang, DragonEgg, and Polly momentarily.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171366 91177308-0d34-0410-b5e6-96231b3b80d8
Sooooo many of these had incorrect or strange main module includes.
I have manually inspected all of these, and fixed the main module
include to be the nearest plausible thing I could find. If you own or
care about any of these source files, I encourage you to take some time
and check that these edits were sensible. I can't have broken anything
(I strictly added headers, and reordered them, never removed), but they
may not be the headers you'd really like to identify as containing the
API being implemented.
Many forward declarations and missing includes were added to a header
files to allow them to parse cleanly when included first. The main
module rule does in fact have its merits. =]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169131 91177308-0d34-0410-b5e6-96231b3b80d8
This function estimates stack size and will be called before
PrologEpilogInserter scans the callee-saved registers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@167313 91177308-0d34-0410-b5e6-96231b3b80d8
MipsSEFrameLowering.
Implement MipsSEFrameLowering::hasReservedCallFrame. Call frames will not be
reserved if there is a call with a large call frame or there are variable sized
objects on the stack.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161090 91177308-0d34-0410-b5e6-96231b3b80d8
arguments to the stack in MipsISelLowering::LowerCall, use stack pointer and
integer offset operands rather than frame object operands.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161068 91177308-0d34-0410-b5e6-96231b3b80d8
The long branch pass (fixed in r160601) no longer uses the global base register
to compute addresses of branch destinations, so it is not necessary to reserve
a slot on the stack.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160703 91177308-0d34-0410-b5e6-96231b3b80d8
to load an immediate that does not fit into 16-bit. Also, take into
consideration the global base register slot on the stack when computing the
stack size.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158430 91177308-0d34-0410-b5e6-96231b3b80d8
It is better to address sub-registers directly by name instead of
relying on their position in the sub-register list.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157703 91177308-0d34-0410-b5e6-96231b3b80d8
- Stop emitting instructions needed to initialize the global pointer register.
- Stop emitting .cprestore directive.
- Do not take into account the $gp save slot when computing stack size.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156691 91177308-0d34-0410-b5e6-96231b3b80d8
them as machine instructions. Directives ".set noat" and ".set at" are now
emitted only at the beginning and end of a function except in the case where
they are emitted to enclose .cpload with an immediate operand that doesn't fit
in 16-bit field or unaligned load/stores.
Also, make the following changes:
- Remove function isUnalignedLoadStore and use a switch-case statement to
determine whether an instruction is an unaligned load or store.
- Define helper function CreateMCInst which generates an instance of an MCInst
from an opcode and a list of operands.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153552 91177308-0d34-0410-b5e6-96231b3b80d8
reserving a physical register ($gp or $28) for that purpose.
This will completely eliminate loads that restore the value of $gp after every
function call, if the register allocator assigns a callee-saved register, or
eliminate unnecessary loads if it assigns a temporary register.
example:
.cpload $25 // set $gp.
...
.cprestore 16 // store $gp to stack slot 16($sp).
...
jalr $25 // function call. clobbers $gp.
lw $gp, 16($sp) // not emitted if callee-saved reg is chosen.
...
lw $2, 4($gp)
...
jalr $25 // function call.
lw $gp, 16($sp) // not emitted if $gp is not live after this instruction.
...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@151402 91177308-0d34-0410-b5e6-96231b3b80d8
- Use MipsAnalyzeImmediate to expand immediates that do not fit in 16-bit.
- Change the types of variables so that they are sufficiently large to handle
64-bit pointers.
- Emit instructions to set register $28 in a function prologue after
instructions which store callee-saved registers have been emitted.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@148917 91177308-0d34-0410-b5e6-96231b3b80d8
change, now you need a TargetOptions object to create a TargetMachine. Clang
patch to follow.
One small functionality change in PTX. PTX had commented out the machine
verifier parts in their copy of printAndVerify. That now calls the version in
LLVMTargetMachine. Users of PTX who need verification disabled should rely on
not passing the command-line flag to enable it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145714 91177308-0d34-0410-b5e6-96231b3b80d8
argument registers on the callee's stack frame, along with functions that set
and get it.
It is not necessary to add the size of this area when computing stack size in
emitPrologue, since it has already been accounted for in
PEI::calculateFrameObjectOffsets.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144549 91177308-0d34-0410-b5e6-96231b3b80d8
"With this patch we can now generate runnable Mips code through LLVM
direct object emission. We have run numerous simple programs, both C
and C++ and with -O0 and -O3 from the output. The code is not production
ready, but quite useful for experimentation." Patch and message by
Jack Carter
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144414 91177308-0d34-0410-b5e6-96231b3b80d8
