------------------------------------------------------------------------
r277114 | majnemer | 2016-07-28 22:39:21 -0700 (Thu, 28 Jul 2016) | 6 lines
[EarlyCSE] Correctly handle simplified, but live, instructions
Some instructions may have their uses replaced with a symbolic constant.
However, the instruction may still have side effects which percludes it
from being removed from the function. EarlyCSE treated such an
instruction as if it were removed, resulting in PR28763.
------------------------------------------------------------------------
git-svn-id: https://llvm.org/svn/llvm-project/llvm/branches/release_39@277382 91177308-0d34-0410-b5e6-96231b3b80d8
r273711 was reverted by r273743. The inliner needs to know about any
call sites in the inlined function. These were obscured if we replaced
a call to undef with an undef but kept the call around.
This fixes PR28298.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@273753 91177308-0d34-0410-b5e6-96231b3b80d8
We cannot remove an instruction with no uses just because
SimplifyInstruction succeeds. It may have side effects.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@273711 91177308-0d34-0410-b5e6-96231b3b80d8
Redundant invariant loads can be CSE'ed with very little extra effort
over what early-cse already tracks, so it looks reasonable to make
early-cse handle this case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@272954 91177308-0d34-0410-b5e6-96231b3b80d8
This moves some logic added to EarlyCSE in rL268120 into
`llvm::isInstructionTriviallyDead`. Adds a test case for DCE to
demonstrate that passes other than EarlyCSE can now pick up on the new
information.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@268126 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This change teaches EarlyCSE some basic properties of guard intrinsics:
- Guard intrinsics read all memory, but don't write to any memory
- After a guard has executed, the condition it was guarding on can be
assumed to be true
- Guard intrinsics on a constant `true` are no-ops
Reviewers: reames, hfinkel
Subscribers: mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D19578
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@268120 91177308-0d34-0410-b5e6-96231b3b80d8
We take the intersection of overflow flags while CSE'ing.
This permits us to consider two instructions with different overflow
behavior to be replaceable.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@267153 91177308-0d34-0410-b5e6-96231b3b80d8
EarlyCSE had inconsistent behavior with regards to flag'd instructions:
- In some cases, it would pessimize if the available instruction had
different flags by not performing CSE.
- In other cases, it would miscompile if it replaced an instruction
which had no flags with an instruction which has flags.
Fix this by being more consistent with our flag handling by utilizing
andIRFlags.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@267111 91177308-0d34-0410-b5e6-96231b3b80d8
This patch implements a optimization bisect feature, which will allow optimizations to be selectively disabled at compile time in order to track down test failures that are caused by incorrect optimizations.
The bisection is enabled using a new command line option (-opt-bisect-limit). Individual passes that may be skipped call the OptBisect object (via an LLVMContext) to see if they should be skipped based on the bisect limit. A finer level of control (disabling individual transformations) can be managed through an addition OptBisect method, but this is not yet used.
The skip checking in this implementation is based on (and replaces) the skipOptnoneFunction check. Where that check was being called, a new call has been inserted in its place which checks the bisect limit and the optnone attribute. A new function call has been added for module and SCC passes that behaves in a similar way.
Differential Revision: http://reviews.llvm.org/D19172
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@267022 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
In the context of http://wg21.link/lwg2445 C++ uses the concept of
'stronger' ordering but doesn't define it properly. This should be fixed
in C++17 barring a small question that's still open.
The code currently plays fast and loose with the AtomicOrdering
enum. Using an enum class is one step towards tightening things. I later
also want to tighten related enums, such as clang's
AtomicOrderingKind (which should be shared with LLVM as a 'C++ ABI'
enum).
This change touches a few lines of code which can be improved later, I'd
like to keep it as NFC for now as it's already quite complex. I have
related changes for clang.
As a follow-up I'll add:
bool operator<(AtomicOrdering, AtomicOrdering) = delete;
bool operator>(AtomicOrdering, AtomicOrdering) = delete;
bool operator<=(AtomicOrdering, AtomicOrdering) = delete;
bool operator>=(AtomicOrdering, AtomicOrdering) = delete;
This is separate so that clang and LLVM changes don't need to be in sync.
Reviewers: jyknight, reames
Subscribers: jyknight, llvm-commits
Differential Revision: http://reviews.llvm.org/D18775
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@265602 91177308-0d34-0410-b5e6-96231b3b80d8
This was originally a pointer to support pass managers which didn't use
AnalysisManagers. However, that doesn't realistically come up much and
the complexity of supporting it doesn't really make sense.
In fact, *many* parts of the pass manager were just assuming the pointer
was never null already. This at least makes it much more explicit and
clear.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@263219 91177308-0d34-0410-b5e6-96231b3b80d8
The rules for removing trivially dead stores are a lot less complicated than loads. Since we know the later store post dominates the former and the former dominates the later, unless the former has side effects other than the actual store, we can remove it. One slightly surprising thing is that we can freely remove atomic stores, even if the later one isn't atomic. There's no guarantee the atomic one was every visible.
For the moment, we don't handle DSE of ordered atomic stores. We could extend the same chain of reasoning to them, but the catch is we'd then have to model the ordering effect without a store instruction. Since our fences are a stronger than our operation orderings, simple using a fence isn't an obvious win. This arguable calls for a refinement in our fence specification, but that's (much) later work.
Differential Revision: http://reviews.llvm.org/D15352
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@255914 91177308-0d34-0410-b5e6-96231b3b80d8
Extend EarlyCSE with an additional style of dead store elimination. If we write back a value just read from that memory location, we can eliminate the store under the assumption that the value hasn't changed.
I'm implementing this mostly because I noticed the omission when looking at the code. It seemed strange to have InstCombine have a peephole which was more powerful than EarlyCSE. :)
Differential Revision: http://reviews.llvm.org/D15397
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@255739 91177308-0d34-0410-b5e6-96231b3b80d8
This patch teaches the fully redundant load part of EarlyCSE how to forward from atomic and volatile loads and stores, and how to eliminate unordered atomics (only). This patch does not include dead store elimination support for unordered atomics, that will follow in the near future.
The basic idea is that we allow all loads and stores to be tracked by the AvailableLoad table. We store a bit in the table which tracks whether load/store was atomic, and then only replace atomic loads with ones which were also atomic.
No attempt is made to refine our handling of ordered loads or stores. Those are still treated as full fences. We could pretty easily extend the release fence handling to release stores, but that should be a separate patch.
Differential Revision: http://reviews.llvm.org/D15337
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@255054 91177308-0d34-0410-b5e6-96231b3b80d8
254950 ended up being not NFC. The previous code was overriding the flags for whether an instruction read or wrote memory using the target specific flags returned via TTI. I'd missed this in my refactoring. Since I mistakenly built only x86 and didn't notice the number of unsupported tests, I didn't catch that before the original checkin.
This raises an interesting issue though. Given we have function attributes (i.e. readonly, readnone, argmemonly) which describe the aliasing of intrinsics, why does TTI have this information overriding the instruction definition at all? I see no reason for this, but decided to preserve existing behavior for the moment. The root issue might be that we don't have a "writeonly" attribute.
Original commit message:
[EarlyCSE] Simplify and invert ParseMemoryInst [NFCI]
Restructure ParseMemoryInst - which was introduced to abstract over target specific load and stores instructions - to just query the underlying instructions. In theory, this could be slightly slower than caching the results, but in practice, it's very unlikely to be measurable.
The simple query scheme makes it far easier to understand, and much easier to extend with new queries. Given I'm about to need to add new query types, doing the cleanup first seemed worthwhile.
Do we still believe the target specific intrinsic handling is worthwhile in EarlyCSE? It adds quite a bit of complexity and makes the code harder to read. Being able to delete the abstraction entirely would be wonderful.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@254957 91177308-0d34-0410-b5e6-96231b3b80d8
It's causing test failures on AArch64. Due to a bad build config on my part, I apparently wasn't running the tests I thought I was.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@254954 91177308-0d34-0410-b5e6-96231b3b80d8
Restructure ParseMemoryInst - which was introduced to abstract over target specific load and stores instructions - to just query the underlying instructions. In theory, this could be slightly slower than caching the results, but in practice, it's very unlikely to be measurable.
The simple query scheme makes it far easier to understand, and much easier to extend with new queries. Given I'm about to need to add new query types, doing the cleanup first seemed worthwhile.
Do we still believe the target specific intrinsic handling is worthwhile in EarlyCSE? It adds quite a bit of complexity and makes the code harder to read. Being able to delete the abstraction entirely would be wonderful.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@254950 91177308-0d34-0410-b5e6-96231b3b80d8
When the notion of target specific memory intrinsics was introduced to EarlyCSE, the commit confused the notions of volatile and simple memory access. Since I'm about to start working on this area, cleanup the naming so that patches aren't horribly confusing. Note that the actual implementation was always bailing if the load or store wasn't simple.
Reminder:
- "volatile" - C++ volatile, can't remove any memory operations, but in principal unordered
- "ordered" - imposes ordering constraints on other nearby memory operations
- "atomic" - can't be split or sheared. In LLVM terms, all "ordered" operations are also atomic so the predicate "isAtomic" is often used.
- "simple" - a load which is none of the above. These are normal loads and what most of the optimizer works with.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@254805 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Some target intrinsics can access multiple elements, using the pointer as a
base address (e.g. AArch64 ld4). When trying to CSE such instructions,
it must be checked the available value comes from a compatible instruction
because the pointer is not enough to discriminate whether the value is
correct.
Reviewers: ssijaric
Subscribers: mcrosier, llvm-commits, aemerson
Differential Revision: http://reviews.llvm.org/D13475
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@249523 91177308-0d34-0410-b5e6-96231b3b80d8
GlobalsAA must by definition be preserved in function passes, but the passmanager doesn't know that. Make each pass explicitly preserve GlobalsAA.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@247263 91177308-0d34-0410-b5e6-96231b3b80d8
A release fence acts as a publication barrier for stores within the current thread to become visible to other threads which might observe the release fence. It does not require the current thread to observe stores performed on other threads. As a result, we can allow store-load and load-store forwarding across a release fence.
We do need to make sure that stores before the fence can't be eliminated even if there's another store to the same location after the fence. In theory, we could reorder the second store above the fence and *then* eliminate the former, but we can't do this if the stores are on opposite sides of the fence.
Note: While more aggressive then what's there, this patch is still implementing a really conservative ordering. In particular, I'm not trying to exploit undefined behavior via races, or the fact that the LangRef says only 'atomic' accesses are ordered w.r.t. fences.
Differential Revision: http://reviews.llvm.org/D11434
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@246134 91177308-0d34-0410-b5e6-96231b3b80d8
The patch is generated using this command:
tools/clang/tools/extra/clang-tidy/tool/run-clang-tidy.py -fix \
-checks=-*,llvm-namespace-comment -header-filter='llvm/.*|clang/.*' \
llvm/lib/
Thanks to Eugene Kosov for the original patch!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@240137 91177308-0d34-0410-b5e6-96231b3b80d8
This patch extends EarlyCSE to take advantage of the information that a controlling branch gives us about the value of a Value within this and dominated basic blocks. If the current block has a single predecessor with a controlling branch, we can infer what the branch condition must have been to execute this block. The actual change to support this is downright simple because EarlyCSE's existing scoped hash table logic deals with most of the complexity around merging.
The patch actually implements two optimizations.
1) The first is analogous to JumpThreading in that it enables EarlyCSE's CSE handling to fold branches which are exactly redundant due to a previous branch to branches on constants. (It doesn't actually replace the branch or change the CFG.) This is pretty clearly a win since it enables substantial CFG simplification before we start trying to inline.
2) The second is analogous to CVP in that it exploits the knowledge gained to replace dominated *uses* of the original value. EarlyCSE does not otherwise reason about specific uses, so this is the more arguable one. It does enable further simplication and constant folding within the rest of the visit by EarlyCSE.
In both cases, the added code only handles the easy dominance based case of each optimization. The general case is deferred to the existing passes.
Differential Revision: http://reviews.llvm.org/D9763
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238071 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Now that the DataLayout is a mandatory part of the module, let's start
cleaning the codebase. This patch is a first attempt at doing that.
This patch is not exactly NFC as for instance some places were passing
a nullptr instead of the DataLayout, possibly just because there was a
default value on the DataLayout argument to many functions in the API.
Even though it is not purely NFC, there is no change in the
validation.
I turned as many pointer to DataLayout to references, this helped
figuring out all the places where a nullptr could come up.
I had initially a local version of this patch broken into over 30
independant, commits but some later commit were cleaning the API and
touching part of the code modified in the previous commits, so it
seemed cleaner without the intermediate state.
Test Plan:
Reviewers: echristo
Subscribers: llvm-commits
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231740 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
DataLayout keeps the string used for its creation.
As a side effect it is no longer needed in the Module.
This is "almost" NFC, the string is no longer
canonicalized, you can't rely on two "equals" DataLayout
having the same string returned by getStringRepresentation().
Get rid of DataLayoutPass: the DataLayout is in the Module
The DataLayout is "per-module", let's enforce this by not
duplicating it more than necessary.
One more step toward non-optionality of the DataLayout in the
module.
Make DataLayout Non-Optional in the Module
Module->getDataLayout() will never returns nullptr anymore.
Reviewers: echristo
Subscribers: resistor, llvm-commits, jholewinski
Differential Revision: http://reviews.llvm.org/D7992
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231270 91177308-0d34-0410-b5e6-96231b3b80d8
getTTI method used to get an actual TTI object.
No functionality changed. This just threads the argument and ensures
code like the inliner can correctly look up the callee's TTI rather than
using a fixed one.
The next change will use this to implement per-function subtarget usage
by TTI. The changes after that should eliminate the need for FTTI as that
will have become the default.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227730 91177308-0d34-0410-b5e6-96231b3b80d8
Hans Wennborg