In the minimal case, this won't remove instructions, but it still improves
uses of existing values.
In the motivating example from PR35834, it does remove instructions, and
sets that case up to be optimized by something like D41603:
https://reviews.llvm.org/D41603
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@321936 91177308-0d34-0410-b5e6-96231b3b80d8
Besides the bug of omitting the inverse transform of max(~a, ~b) --> ~min(a, b),
the use checking and operand creation were off. We were potentially creating
repeated identical instructions of existing values. This led to infinite
looping after I added the extra folds.
By using the simpler m_Not matcher and not creating new 'not' ops for a and b,
we avoid that problem. It's possible that not using IsFreeToInvert() here is
more limiting than the simpler matcher, but there are no tests for anything
more exotic. It's also possible that we should relax the use checking further
to handle a case like PR35834:
https://bugs.llvm.org/show_bug.cgi?id=35834
...but we can make that a follow-up if it is needed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@321882 91177308-0d34-0410-b5e6-96231b3b80d8
We might want to select NAN here or do this transform with fast-math,
but this should at least fix the miscompile.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@321461 91177308-0d34-0410-b5e6-96231b3b80d8
We want to do this for 2 reasons:
1. Value tracking does not recognize the ashr variant, so it would fail to match for cases like D39766.
2. DAGCombiner does better at producing optimal codegen when we have the cmp+sel pattern.
More detail about what happens in the backend:
1. DAGCombiner has a generic transform for all targets to convert the scalar cmp+sel variant of abs
into the shift variant. That is the opposite of this IR canonicalization.
2. DAGCombiner has a generic transform for all targets to convert the vector cmp+sel variant of abs
into either an ABS node or the shift variant. That is again the opposite of this IR canonicalization.
3. DAGCombiner has a generic transform for all targets to convert the exact shift variants produced by #1 or #2
into an ISD::ABS node. Note: It would be an efficiency improvement if we had #1 go directly to an ABS node
when that's legal/custom.
4. The pattern matching above is incomplete, so it is possible to escape the intended/optimal codegen in a
variety of ways.
a. For #2, the vector path is missing the case for setlt with a '1' constant.
b. For #3, we are missing a match for commuted versions of the shift variants.
5. Therefore, this IR canonicalization can only help get us to the optimal codegen. The version of cmp+sel
produced by this patch will be recognized in the DAG and converted to an ABS node when possible or the
shift sequence when not.
6. In the following examples with this patch applied, we may get conditional moves rather than the shift
produced by the generic DAGCombiner transforms. The conditional move is created using a target-specific
decision for any given target. Whether it is optimal or not for a particular subtarget may be up for debate.
define i32 @abs_shifty(i32 %x) {
%signbit = ashr i32 %x, 31
%add = add i32 %signbit, %x
%abs = xor i32 %signbit, %add
ret i32 %abs
}
define i32 @abs_cmpsubsel(i32 %x) {
%cmp = icmp slt i32 %x, zeroinitializer
%sub = sub i32 zeroinitializer, %x
%abs = select i1 %cmp, i32 %sub, i32 %x
ret i32 %abs
}
define <4 x i32> @abs_shifty_vec(<4 x i32> %x) {
%signbit = ashr <4 x i32> %x, <i32 31, i32 31, i32 31, i32 31>
%add = add <4 x i32> %signbit, %x
%abs = xor <4 x i32> %signbit, %add
ret <4 x i32> %abs
}
define <4 x i32> @abs_cmpsubsel_vec(<4 x i32> %x) {
%cmp = icmp slt <4 x i32> %x, zeroinitializer
%sub = sub <4 x i32> zeroinitializer, %x
%abs = select <4 x i1> %cmp, <4 x i32> %sub, <4 x i32> %x
ret <4 x i32> %abs
}
> $ ./opt -instcombine shiftyabs.ll -S | ./llc -o - -mtriple=x86_64 -mattr=avx
> abs_shifty:
> movl %edi, %eax
> negl %eax
> cmovll %edi, %eax
> retq
>
> abs_cmpsubsel:
> movl %edi, %eax
> negl %eax
> cmovll %edi, %eax
> retq
>
> abs_shifty_vec:
> vpabsd %xmm0, %xmm0
> retq
>
> abs_cmpsubsel_vec:
> vpabsd %xmm0, %xmm0
> retq
>
> $ ./opt -instcombine shiftyabs.ll -S | ./llc -o - -mtriple=aarch64
> abs_shifty:
> cmp w0, #0 // =0
> cneg w0, w0, mi
> ret
>
> abs_cmpsubsel:
> cmp w0, #0 // =0
> cneg w0, w0, mi
> ret
>
> abs_shifty_vec:
> abs v0.4s, v0.4s
> ret
>
> abs_cmpsubsel_vec:
> abs v0.4s, v0.4s
> ret
>
> $ ./opt -instcombine shiftyabs.ll -S | ./llc -o - -mtriple=powerpc64le
> abs_shifty:
> srawi 4, 3, 31
> add 3, 3, 4
> xor 3, 3, 4
> blr
>
> abs_cmpsubsel:
> srawi 4, 3, 31
> add 3, 3, 4
> xor 3, 3, 4
> blr
>
> abs_shifty_vec:
> vspltisw 3, -16
> vspltisw 4, 15
> vsubuwm 3, 4, 3
> vsraw 3, 2, 3
> vadduwm 2, 2, 3
> xxlxor 34, 34, 35
> blr
>
> abs_cmpsubsel_vec:
> vspltisw 3, -16
> vspltisw 4, 15
> vsubuwm 3, 4, 3
> vsraw 3, 2, 3
> vadduwm 2, 2, 3
> xxlxor 34, 34, 35
> blr
>
Differential Revision: https://reviews.llvm.org/D40984
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@320921 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Passing AliasAnalysis results instead of nullptr appears to work just fine.
A couple new-pass-manager tests updated to align with new order of analyses.
Reviewers: chandlerc, spatel, craig.topper
Reviewed By: chandlerc
Subscribers: mehdi_amini, eraman, llvm-commits
Differential Revision: https://reviews.llvm.org/D41203
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@320687 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
If we have pattern `store (load(bitcast(select (cmp(V1, V2), &V1,
&V2)))), bitcast)`, but the load is used in other instructions, it leads
to looping in InstCombiner. Patch adds additional check that all users
of the load instructions are stores and then replaces all uses of load
instruction by the new one with new type.
Reviewers: RKSimon, spatel, majnemer
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D41072
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@320525 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
If we have pattern `store (load(bitcast(select (cmp(V1, V2), &V1,
&V2)))), bitcast)`, but the load is used in other instructions, it leads
to looping in InstCombiner. Patch adds additional check that all users
of the load instructions are stores and then replaces all uses of load
instruction by the new one with new type.
Reviewers: RKSimon, spatel, majnemer
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D41072
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@320510 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
If we have pattern `store (load(bitcast(select (cmp(V1, V2), &V1,
&V2)))), bitcast)`, but the load is used in other instructions, it leads
to looping in InstCombiner. Patch adds additional check that all users
of the load instructions are stores and then replaces all uses of load
instruction by the new one with new type.
Reviewers: RKSimon, spatel, majnemer
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D41072
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@320499 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
If we have pattern `store (load(bitcast(select (cmp(V1, V2), &V1,
&V2)))), bitcast)`, but the load is used in other instructions, it leads
to looping in InstCombiner. Patch adds additional check that all users
of the load instructions are stores and then replaces all uses of load
instruction by the new one with new type.
Reviewers: RKSimon, spatel, majnemer
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D41072
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@320496 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
If we have pattern `store (load(bitcast(select (cmp(V1, V2), &V1,
&V2)))), bitcast)`, but the load is used in other instructions, it leads
to looping in InstCombiner. Patch adds additional check that all users
of the load instructions are stores and then replaces all uses of load
instruction by the new one with new type.
Reviewers: RKSimon, spatel, majnemer
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D41072
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@320488 91177308-0d34-0410-b5e6-96231b3b80d8
If we have pattern `store (load(bitcast(select (cmp(V1, V2), &V1,
&V2)))), bitcast)`, but the load is used in other instructions, it leads
to looping in InstCombiner. Patch adds additional check that all users
of the load instructions are stores and then replaces all uses of load
instruction by the new one with new type.
Reviewers: RKSimon, spatel, majnemer
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D41072
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@320483 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Currently, in InstCombineLoadStoreAlloca, we have simplification
rules for the following cases:
1. load off a null
2. load off a GEP with null base
3. store to a null
This patch adds support for the fourth case which is store into a
GEP with null base. Since this is UB as well (and directly analogous to
the load off a GEP with null base), we can substitute the stored val
with undef in instcombine, so that SimplifyCFG can optimize this code
into unreachable code.
Note: Right now, simplifyCFG hasn't been taught about optimizing
this to unreachable and adding an llvm.trap (this is already done for
the above 3 cases).
Reviewers: majnemer, hfinkel, sanjoy, davide
Reviewed by: sanjoy, davide
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D41026
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@320480 91177308-0d34-0410-b5e6-96231b3b80d8
The tests fail (opt asserts) on Windows.
> Summary:
> If we have pattern `store (load(bitcast(select (cmp(V1, V2), &V1,
> &V2)))), bitcast)`, but the load is used in other instructions, it leads
> to looping in InstCombiner. Patch adds additional check that all users
> of the load instructions are stores and then replaces all uses of load
> instruction by the new one with new type.
>
> Reviewers: RKSimon, spatel, majnemer
>
> Subscribers: llvm-commits
>
> Differential Revision: https://reviews.llvm.org/D41072
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@320421 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
If we have pattern `store (load(bitcast(select (cmp(V1, V2), &V1,
&V2)))), bitcast)`, but the load is used in other instructions, it leads
to looping in InstCombiner. Patch adds additional check that all users
of the load instructions are stores and then replaces all uses of load
instruction by the new one with new type.
Reviewers: RKSimon, spatel, majnemer
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D41072
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@320407 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This is LLVM instrumentation for the new HWASan tool. It is basically
a stripped down copy of ASan at this point, w/o stack or global
support. Instrumenation adds a global constructor + runtime callbacks
for every load and store.
HWASan comes with its own IR attribute.
A brief design document can be found in
clang/docs/HardwareAssistedAddressSanitizerDesign.rst (submitted earlier).
Reviewers: kcc, pcc, alekseyshl
Subscribers: srhines, mehdi_amini, mgorny, javed.absar, eraman, llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D40932
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@320217 91177308-0d34-0410-b5e6-96231b3b80d8
// trunc (binop X, C) --> binop (trunc X, C')
// trunc (binop (ext X), Y) --> binop X, (trunc Y)
I'm grouping sub with the other binops because that makes the code simpler
and the transforms are valid:
https://rise4fun.com/Alive/UeF
...so even though we don't expect a sub with constant Op1 or any of the
other opcodes with constant Op0 due to canonicalization rules, we might as
well handle those situations if non-canonical code somehow reaches this
point (it should just make instcombine more efficient in reaching its
end goal).
This should solve the problem that later manifests in the vectorizers in
PR35295:
https://bugs.llvm.org/show_bug.cgi?id=35295
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@318404 91177308-0d34-0410-b5e6-96231b3b80d8
InstCombine salvages debug info for every instruction it erases from its
worklist, but it wasn't doing it during its initial DCE when populating
its worklist. This fixes that.
This should help improve availability of 'this' in optimized debug info
when casts are necessary.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@318320 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This patch optimizes a binop sandwiched between 2 selects with the same condition. Since we know its only used by the select we can propagate the appropriate input value from the earlier select.
As I'm writing this I realize I may need to avoid doing this for division in case the select was protecting a divide by zero?
Reviewers: spatel, majnemer
Reviewed By: majnemer
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D39999
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@318267 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This patch adds an early out to visitICmpInst if we are looking at a compare as part of an integer absolute value idiom. Similar is already done for min/max.
In the particular case I observed in a benchmark we had an absolute value of a load from an indexed global. We simplified the compare using foldCmpLoadFromIndexedGlobal into a magic bit vector, a shift, and an and. But the load result was still used for the select and the negate part of the absolute valute idiom. So we overcomplicated the code and lost the ability to recognize it as an absolute value.
I've chosen a simpler case for the test here.
Reviewers: spatel, davide, majnemer
Reviewed By: spatel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D39766
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@317994 91177308-0d34-0410-b5e6-96231b3b80d8
The hexagon test should be fixed now.
Original commit message:
This pulls shifts through a select+binop with a constant where the select conditionally executes the binop. We already do this for just the binop, but not with the select.
This can allow us to get the select closer to other selects to enable removing one.
Differential Revision: https://reviews.llvm.org/D39222
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@317600 91177308-0d34-0410-b5e6-96231b3b80d8
This broke the CodeGen/Hexagon/loop-idiom/pmpy-mod.ll test on a bunch of buildbots.
> This pulls shifts through a select+binop with a constant where the select conditionally executes the binop. We already do this for just the binop, but not with the select.
>
> This can allow us to get the select closer to other selects to enable removing one.
>
> Differential Revision: https://reviews.llvm.org/D39222
>
> git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@317510 91177308-0d34-0410-b5e6-96231b3b80d8
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@317518 91177308-0d34-0410-b5e6-96231b3b80d8
This pulls shifts through a select+binop with a constant where the select conditionally executes the binop. We already do this for just the binop, but not with the select.
This can allow us to get the select closer to other selects to enable removing one.
Differential Revision: https://reviews.llvm.org/D39222
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@317510 91177308-0d34-0410-b5e6-96231b3b80d8
As discussed on llvm-dev:
http://lists.llvm.org/pipermail/llvm-dev/2016-November/107104.html
and again more recently:
http://lists.llvm.org/pipermail/llvm-dev/2017-October/118118.html
...this is a step in cleaning up our fast-math-flags implementation in IR to better match
the capabilities of both clang's user-visible flags and the backend's flags for SDNode.
As proposed in the above threads, we're replacing the 'UnsafeAlgebra' bit (which had the
'umbrella' meaning that all flags are set) with a new bit that only applies to algebraic
reassociation - 'AllowReassoc'.
We're also adding a bit to allow approximations for library functions called 'ApproxFunc'
(this was initially proposed as 'libm' or similar).
...and we're out of bits. 7 bits ought to be enough for anyone, right? :) FWIW, I did
look at getting this out of SubclassOptionalData via SubclassData (spacious 16-bits),
but that's apparently already used for other purposes. Also, I don't think we can just
add a field to FPMathOperator because Operator is not intended to be instantiated.
We'll defer movement of FMF to another day.
We keep the 'fast' keyword. I thought about removing that, but seeing IR like this:
%f.fast = fadd reassoc nnan ninf nsz arcp contract afn float %op1, %op2
...made me think we want to keep the shortcut synonym.
Finally, this change is binary incompatible with existing IR as seen in the
compatibility tests. This statement:
"Newer releases can ignore features from older releases, but they cannot miscompile
them. For example, if nsw is ever replaced with something else, dropping it would be
a valid way to upgrade the IR."
( http://llvm.org/docs/DeveloperPolicy.html#ir-backwards-compatibility )
...provides the flexibility we want to make this change without requiring a new IR
version. Ie, we're not loosening the FP strictness of existing IR. At worst, we will
fail to optimize some previously 'fast' code because it's no longer recognized as
'fast'. This should get fixed as we audit/squash all of the uses of 'isFast()'.
Note: an inter-dependent clang commit to use the new API name should closely follow
commit.
Differential Revision: https://reviews.llvm.org/D39304
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@317488 91177308-0d34-0410-b5e6-96231b3b80d8
If a select instruction tests the returned flag of a cmpxchg instruction and
selects between the returned value of the cmpxchg instruction and its compare
operand, the result of the select will always be equal to its false value.
Differential Revision: https://reviews.llvm.org/D39383
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@316994 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
For reference, see: http://lists.llvm.org/pipermail/llvm-dev/2017-August/116589.html
This patch fleshes out the instruction class hierarchy with respect to atomic and
non-atomic memory intrinsics. With this change, the relevant part of the class
hierarchy becomes:
IntrinsicInst
-> MemIntrinsicBase (methods-only class)
-> MemIntrinsic (non-atomic intrinsics)
-> MemSetInst
-> MemTransferInst
-> MemCpyInst
-> MemMoveInst
-> AtomicMemIntrinsic (atomic intrinsics)
-> AtomicMemSetInst
-> AtomicMemTransferInst
-> AtomicMemCpyInst
-> AtomicMemMoveInst
-> AnyMemIntrinsic (both atomicities)
-> AnyMemSetInst
-> AnyMemTransferInst
-> AnyMemCpyInst
-> AnyMemMoveInst
This involves some class renaming:
ElementUnorderedAtomicMemCpyInst -> AtomicMemCpyInst
ElementUnorderedAtomicMemMoveInst -> AtomicMemMoveInst
ElementUnorderedAtomicMemSetInst -> AtomicMemSetInst
A script for doing this renaming in downstream trees is included below.
An example of where the Any* classes should be used in LLVM is when reasoning
about the effects of an instruction (ex: aliasing).
---
Script for renaming AtomicMem* classes:
PREFIXES="[<,([:space:]]"
CLASSES="MemIntrinsic|MemTransferInst|MemSetInst|MemMoveInst|MemCpyInst"
SUFFIXES="[;)>,[:space:]]"
REGEX="(${PREFIXES})ElementUnorderedAtomic(${CLASSES})(${SUFFIXES})"
REGEX2="visitElementUnorderedAtomic(${CLASSES})"
FILES=$( grep -E "(${REGEX}|${REGEX2})" -r . | tr ':' ' ' | awk '{print $1}' | sort | uniq )
SED_SCRIPT="s~${REGEX}~\1Atomic\2\3~g"
SED_SCRIPT2="s~${REGEX2}~visitAtomic\1~g"
for f in $FILES; do
echo "Processing: $f"
sed -i ".bak" -E "${SED_SCRIPT};${SED_SCRIPT2};${EA_SED_SCRIPT};${EA_SED_SCRIPT2}" $f
done
Reviewers: sanjoy, deadalnix, apilipenko, anna, skatkov, mkazantsev
Reviewed By: sanjoy
Subscribers: hfinkel, jholewinski, arsenm, sdardis, nhaehnle, JDevlieghere, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D38419
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@316950 91177308-0d34-0410-b5e6-96231b3b80d8
Sanjay Patel