undefined reference to `llvm::TargetPassConfig::ID' on
clang-ppc64le-linux-multistage
This reverts commit eea333c33fa73ad225ef28607795984829f65688.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@317213 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This is mostly a noop (most of the test diffs are renamed blocks).
There are a few temporary register renames (eax<->ecx) and a few blocks are
shuffled around.
See the discussion in PR33325 for more details.
Reviewers: spatel
Subscribers: mgorny
Differential Revision: https://reviews.llvm.org/D39456
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@317211 91177308-0d34-0410-b5e6-96231b3b80d8
- Targets that want to support memcmp expansions now return the list of
supported load sizes.
- Expansion codegen does not assume that all power-of-two load sizes
smaller than the max load size are valid. For examples, this is not the
case for x86(32bit)+sse2.
Fixes PR34887.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@316905 91177308-0d34-0410-b5e6-96231b3b80d8
Compute the actual decomposition only after deciding whether to expand
of not. Else, it's easy to make the compiler OOM with:
`memcpy(dst, src, 0xffffffffffffffff);`, which typically happens if
someone mistakenly passes a negative value. Add a test.
This reverts commit f8fc02fbd4.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@316567 91177308-0d34-0410-b5e6-96231b3b80d8
The previous rev (r310208) failed to account for overflow when subtracting the
constants to see if they're suitable for shift/lea. This version add a check
for that and more test were added in r310490.
We can convert any select-of-constants to math ops:
http://rise4fun.com/Alive/d7d
For this patch, I'm enhancing an existing x86 transform that uses fake multiplies
(they always become shl/lea) to avoid cmov or branching. The current code misses
cases where we have a negative constant and a positive constant, so this is just
trying to plug that hole.
The DAGCombiner diff prevents us from hitting a terrible inefficiency: we can start
with a select in IR, create a select DAG node, convert it into a sext, convert it
back into a select, and then lower it to sext machine code.
Some notes about the test diffs:
1. 2010-08-04-MaskedSignedCompare.ll - We were creating control flow that didn't exist in the IR.
2. memcmp.ll - Choose -1 or 1 is the case that got me looking at this again. We could avoid the
push/pop in some cases if we used 'movzbl %al' instead of an xor on a different reg? That's a
post-DAG problem though.
3. mul-constant-result.ll - The trade-off between sbb+not vs. setne+neg could be addressed if
that's a regression, but those would always be nearly equivalent.
4. pr22338.ll and sext-i1.ll - These tests have undef operands, so we don't actually care about these diffs.
5. sbb.ll - This shows a win for what is likely a common case: choose -1 or 0.
6. select.ll - There's another borderline case here: cmp+sbb+or vs. test+set+lea? Also, sbb+not vs. setae+neg shows up again.
7. select_const.ll - These are motivating cases for the enhancement; replace cmov with cheaper ops.
Assembly differences between movzbl and xor to avoid a partial reg stall are caused later by the X86 Fixup SetCC pass.
Differential Revision: https://reviews.llvm.org/D35340
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@310717 91177308-0d34-0410-b5e6-96231b3b80d8
We can convert any select-of-constants to math ops:
http://rise4fun.com/Alive/d7d
For this patch, I'm enhancing an existing x86 transform that uses fake multiplies
(they always become shl/lea) to avoid cmov or branching. The current code misses
cases where we have a negative constant and a positive constant, so this is just
trying to plug that hole.
The DAGCombiner diff prevents us from hitting a terrible inefficiency: we can start
with a select in IR, create a select DAG node, convert it into a sext, convert it
back into a select, and then lower it to sext machine code.
Some notes about the test diffs:
1. 2010-08-04-MaskedSignedCompare.ll - We were creating control flow that didn't exist in the IR.
2. memcmp.ll - Choose -1 or 1 is the case that got me looking at this again. I
think we could avoid the push/pop in some cases if we used 'movzbl %al' instead of an xor on
a different reg? That's a post-DAG problem though.
3. mul-constant-result.ll - The trade-off between sbb+not vs. setne+neg could be addressed if
that's a regression, but I think those would always be nearly equivalent.
4. pr22338.ll and sext-i1.ll - These tests have undef operands, so I don't think we actually care about these diffs.
5. sbb.ll - This shows a win for what I think is a common case: choose -1 or 0.
6. select.ll - There's another borderline case here: cmp+sbb+or vs. test+set+lea? Also, sbb+not vs. setae+neg shows up again.
7. select_const.ll - These are motivating cases for the enhancement; replace cmov with cheaper ops.
Assembly differences between movzbl and xor to avoid a partial reg stall are caused later by the X86 Fixup SetCC pass.
Differential Revision: https://reviews.llvm.org/D35340
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@310208 91177308-0d34-0410-b5e6-96231b3b80d8
This only affects very small memcmp on x86 for now, but it
will become more important if we allow vector-sized load and
compares.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@309711 91177308-0d34-0410-b5e6-96231b3b80d8
As noted in the code comment, transforming this in the other direction might require
a separate transform here in CGP given the block-at-a-time DAG constraint.
Besides that theoretical motivation, there are 2 practical motivations for the
subtract-of-cmps form:
1. The codegen for both x86 and PPC is better for this IR (though PPC could be better still).
There is discussion about canonicalizing IR to the select form
( http://lists.llvm.org/pipermail/llvm-dev/2017-July/114885.html ),
so we probably need to add DAG transforms for those patterns anyway, but this improves the
memcmp output without waiting for that step.
2. If we allow vector-sized chunks for the load and compare, x86 is better prepared to convert
that to optimal code when using subtract-of-cmps, so another prerequisite patch is avoided
if we choose to enable that.
Differential Revision: https://reviews.llvm.org/D34904
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@309597 91177308-0d34-0410-b5e6-96231b3b80d8
D35067/rL308322 attempted to support up to 4 load pairs for memcmp inlining which resulted in regressions for some optimized libc memcmp implementations (PR33914).
Until we can match these more optimal cases, this patch reduces the memcmp expansion to a maximum of 2 load pairs (which matches what we do for -Os).
This patch should be considered for the 5.0.0 release branch as well
Differential Revision: https://reviews.llvm.org/D35830
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@308986 91177308-0d34-0410-b5e6-96231b3b80d8
It should be a win to avoid going out to the system lib for all small memcmp() calls using scalar ops. For x86 32-bit, this means most everything up to 16 bytes. For 64-bit, that doubles because we can do 8-byte loads.
Notes:
Reduced from 4 to 2 loads for -Os behavior, which might not be optimal in all cases. It's effectively a question of how much do we trust the system implementation. Linux and macOS (and Windows I assume, but did not test) have optimized memcmp() code for x86, so it's probably not bad either way? PPC is using 8/4 for defaults on these. We do not expand at all for -Oz.
There are still potential improvements to make for the CGP expansion IR and/or lowering such as avoiding select-of-constants (D34904) and not doing zexts to the max load type before doing a compare.
We have special-case SSE/AVX codegen for (memcmp(x, y, 16/32) == 0) that will no longer be produced after this patch. I've shown the experimental justification for that change in PR33329:
https://bugs.llvm.org/show_bug.cgi?id=33329#c12
TLDR: While the vector code is a likely winner, we can't guarantee that it's a winner in all cases on all CPUs, so I'm willing to sacrifice it for the greater good of expanding all small memcmp(). If we want to resurrect that codegen, it can be done by adjusting the CGP params or poking a hole to let those fall-through the CGP expansion.
Committed on behalf of Sanjay Patel
Differential Revision: https://reviews.llvm.org/D35067
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@308322 91177308-0d34-0410-b5e6-96231b3b80d8
As discussed by @spatel on D35067:
"I added the cmov attribute to the 32-bit codegen test because it removes some noise for that file. I think the intent for the SSE vs no-SSE runs is to show the potential difference for the 16 and 32 byte cases rather than the lack of cmov (which has been available for all CPUs since SSE1, so that's why it shows up automatically with -mattr=sse2)."
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@308309 91177308-0d34-0410-b5e6-96231b3b80d8
As noted in D34071, there are some IR optimization opportunities that could be
handled by normal IR passes if this expansion wasn't happening so late in CGP.
Regardless of that, it seems wasteful to knowingly produce suboptimal IR here,
so I'm proposing this change:
%s = sub i32 %x, %y
%r = icmp ne %s, 0
=>
%r = icmp ne %x, %y
Changing the predicate to 'eq' mimics what InstCombine would do, so that's just
an efficiency improvement if we decide this expansion should happen sooner.
The fact that the PowerPC backend doesn't eliminate the 'subf.' might be
something for PPC folks to investigate separately.
Differential Revision: https://reviews.llvm.org/D34416
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@306471 91177308-0d34-0410-b5e6-96231b3b80d8
There are a couple of potential improvements as seen in the IR and asm:
1. We're unnecessarily extending to a larger type to compare values.
2. The codegen for (select cond, 1, -1) could avoid a cmov.
(or we could change the order of the compares, so we have a select with 0 operand)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@305802 91177308-0d34-0410-b5e6-96231b3b80d8
We want to check each test on each target, so we need another prefix
when SSE and AVX diverge (as they will if we handle 32-byte and higher).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@298926 91177308-0d34-0410-b5e6-96231b3b80d8
This is the payoff for D31156 - if a target has efficient comparison instructions for vector-sized equality,
we can replace memcmp calls with inline code that is both smaller and faster.
Differential Revision: https://reviews.llvm.org/D31290
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@298775 91177308-0d34-0410-b5e6-96231b3b80d8
Add tests for vector lengths that could be handled without a libcall.
There's an explicit test for 'nobuiltin', so there's not much value
in a separate run that checks that same behavior over and over again.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@298611 91177308-0d34-0410-b5e6-96231b3b80d8
This re-applies commit r292189, reverted in r292191.
SelectionDAGBuilder recognizes libfuncs using some homegrown
parameter type-checking.
Use TLI instead, removing another heap of redundant code.
This isn't strictly NFC, as the SDAG code was too lax.
Concretely, this means changes are required to a few tests:
- calling a non-variadic function via a variadic prototype isn't OK;
it just happens to work on x86_64 (but not on, e.g., aarch64).
- mempcpy has a size_t parameter; the SDAG code accepts any integer
type, which meant using i32 on x86_64 worked.
- a handful of SystemZ tests check the SDAG support for lax prototype
checking: Ulrich agrees on removing them.
I don't think it's worth supporting any of these (IMO) invalid
testcases. Instead, fix them to be more meaningful.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@294028 91177308-0d34-0410-b5e6-96231b3b80d8
SelectionDAGBuilder recognizes libfuncs using some homegrown
parameter type-checking.
Use TLI instead, removing another heap of redundant code.
This isn't strictly NFC, as the SDAG code was too lax.
Concretely, this means changes are required to two tests:
- calling a non-variadic function via a variadic prototype isn't OK;
it just happens to work on x86_64 (but not on, e.g., aarch64).
- mempcpy has a size_t parameter; the SDAG code accepts any integer
type, which meant using i32 on x86_64 worked.
I don't think it's worth supporting either of these (IMO) broken
testcases. Instead, fix them to be more correct.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@292189 91177308-0d34-0410-b5e6-96231b3b80d8
See r230786 and r230794 for similar changes to gep and load
respectively.
Call is a bit different because it often doesn't have a single explicit
type - usually the type is deduced from the arguments, and just the
return type is explicit. In those cases there's no need to change the
IR.
When that's not the case, the IR usually contains the pointer type of
the first operand - but since typed pointers are going away, that
representation is insufficient so I'm just stripping the "pointerness"
of the explicit type away.
This does make the IR a bit weird - it /sort of/ reads like the type of
the first operand: "call void () %x(" but %x is actually of type "void
()*" and will eventually be just of type "ptr". But this seems not too
bad and I don't think it would benefit from repeating the type
("void (), void () * %x(" and then eventually "void (), ptr %x(") as has
been done with gep and load.
This also has a side benefit: since the explicit type is no longer a
pointer, there's no ambiguity between an explicit type and a function
that returns a function pointer. Previously this case needed an explicit
type (eg: a function returning a void() function was written as
"call void () () * @x(" rather than "call void () * @x(" because of the
ambiguity between a function returning a pointer to a void() function
and a function returning void).
No ambiguity means even function pointer return types can just be
written alone, without writing the whole function's type.
This leaves /only/ the varargs case where the explicit type is required.
Given the special type syntax in call instructions, the regex-fu used
for migration was a bit more involved in its own unique way (as every
one of these is) so here it is. Use it in conjunction with the apply.sh
script and associated find/xargs commands I've provided in rr230786 to
migrate your out of tree tests. Do let me know if any of this doesn't
cover your cases & we can iterate on a more general script/regexes to
help others with out of tree tests.
About 9 test cases couldn't be automatically migrated - half of those
were functions returning function pointers, where I just had to manually
delete the function argument types now that we didn't need an explicit
function type there. The other half were typedefs of function types used
in calls - just had to manually drop the * from those.
import fileinput
import sys
import re
pat = re.compile(r'((?:=|:|^|\s)call\s(?:[^@]*?))(\s*$|\s*(?:(?:\[\[[a-zA-Z0-9_]+\]\]|[@%](?:(")?[\\\?@a-zA-Z0-9_.]*?(?(3)"|)|{{.*}}))(?:\(|$)|undef|inttoptr|bitcast|null|asm).*$)')
addrspace_end = re.compile(r"addrspace\(\d+\)\s*\*$")
func_end = re.compile("(?:void.*|\)\s*)\*$")
def conv(match, line):
if not match or re.search(addrspace_end, match.group(1)) or not re.search(func_end, match.group(1)):
return line
return line[:match.start()] + match.group(1)[:match.group(1).rfind('*')].rstrip() + match.group(2) + line[match.end():]
for line in sys.stdin:
sys.stdout.write(conv(re.search(pat, line), line))
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235145 91177308-0d34-0410-b5e6-96231b3b80d8
Similar to gep (r230786) and load (r230794) changes.
Similar migration script can be used to update test cases, which
successfully migrated all of LLVM and Polly, but about 4 test cases
needed manually changes in Clang.
(this script will read the contents of stdin and massage it into stdout
- wrap it in the 'apply.sh' script shown in previous commits + xargs to
apply it over a large set of test cases)
import fileinput
import sys
import re
rep = re.compile(r"(getelementptr(?:\s+inbounds)?\s*\()((<\d*\s+x\s+)?([^@]*?)(|\s*addrspace\(\d+\))\s*\*(?(3)>)\s*)(?=$|%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|zeroinitializer|<|\[\[[a-zA-Z]|\{\{)", re.MULTILINE | re.DOTALL)
def conv(match):
line = match.group(1)
line += match.group(4)
line += ", "
line += match.group(2)
return line
line = sys.stdin.read()
off = 0
for match in re.finditer(rep, line):
sys.stdout.write(line[off:match.start()])
sys.stdout.write(conv(match))
off = match.end()
sys.stdout.write(line[off:])
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232184 91177308-0d34-0410-b5e6-96231b3b80d8
Utilizing the 8 and 16 bit comparison instructions, even when an input can
be folded into the comparison instruction itself, is typically not worth it.
There are too many partial register stalls as a result, leading to significant
slowdowns. By always performing comparisons on at least 32-bit
registers, performance of the calculation chain leading to the
comparison improves. Continue to use the smaller comparisons when
minimizing size, as that allows better folding of loads into the
comparison instructions.
rdar://15386341
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@195496 91177308-0d34-0410-b5e6-96231b3b80d8
This update was done with the following bash script:
find test/CodeGen -name "*.ll" | \
while read NAME; do
echo "$NAME"
if ! grep -q "^; *RUN: *llc.*debug" $NAME; then
TEMP=`mktemp -t temp`
cp $NAME $TEMP
sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \
while read FUNC; do
sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP
done
sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP
sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP
sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP
sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP
mv $TEMP $NAME
fi
done
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186280 91177308-0d34-0410-b5e6-96231b3b80d8
I noticed that SelectionDAGBuilder::visitCall was missing a check for memcmp
in TargetLibraryInfo, so that it would use custom code for memcmp calls even
with -fno-builtin. I also had to add a new -disable-simplify-libcalls option
to llc so that I could write a test for this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161262 91177308-0d34-0410-b5e6-96231b3b80d8
compare. On other targets we end up with a call to memcmp because we don't
want 16 individual byte loads. We should be able to use movups as well, but
we're failing to select the generated icmp.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@92107 91177308-0d34-0410-b5e6-96231b3b80d8
SDISel. This optimization was causing simplifylibcalls to
introduce type-unsafe nastiness. This is the first step, I'll be
expanding the memcmp optimizations shortly, covering things that
we really really wouldn't want simplifylibcalls to do.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@92098 91177308-0d34-0410-b5e6-96231b3b80d8
Clement Courbet