At the last LLVM dev meeting we had a debug info for optimized code
BoF session. In that session I presented some graphs that showed how
the quality of the debug info produced by LLVM changed over the last
couple of years. This is a cleaned up version of the patch I used to
collect the this data. It is implemented as an extension of
llvm-dwarfdump, adding a new --statistics option. The intended
use-case is to automatically run this on the debug info produced by,
e.g., our bots, to identify eyebrow-raising changes or regressions
introduced by new transformations that we could act on.
In the current form, two kinds of data are being collected:
- The number of variables that have a debug location versus the number
of variables in total (this takes into account inlined instances of
the same function, so if a variable is completely missing form only
one instance it will be found).
- The PC range covered by variable location descriptions versus the PC
range of all variables' containing lexical scopes.
The output format is versioned and extensible, so I'm looking forward
to both bug fixes and ideas for other data that would be interesting
to track.
Differential Revision: https://reviews.llvm.org/D36627
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@315101 91177308-0d34-0410-b5e6-96231b3b80d8
The test fails on Linux; see follow-up email on the llvm-commits list.
> Add the option to lookup an address in the debug information and print
> out the file, function, block and line table details.
>
> Differential revision: https://reviews.llvm.org/D38409
This also reverts the follow-up r314818:
> [test] Fix llvm-dwarfdump/cmdline.test
>
> Fixes test/tools/llvm-dwarfdump/cmdline.test
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@314825 91177308-0d34-0410-b5e6-96231b3b80d8
This patch implements the dwarfdump option --find=<name>. This option
looks for a DIE in the accelerator tables and dumps it if found. This
initial patch only adds support for .apple_names to keep the review
small, adding the other sections and pubnames support should be
trivial though.
Differential Revision: https://reviews.llvm.org/D38282
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@314439 91177308-0d34-0410-b5e6-96231b3b80d8
This patch makes the `.eh_frame` extension an alias for `.debug_frame`.
Up till now it was only possible to dump the section using objdump, but
not with dwarfdump. Since the two are essentially interchangeable, we
dump whichever of the two is present.
As a workaround, this patch also adds parsing for 3 currently
unimplemented CFA instructions: `DW_CFA_def_cfa_expression`,
`DW_CFA_expression`, and `DW_CFA_val_expression`. Because I lack the
required knowledge, I just parse the fields without actually creating
the instructions.
Finally, this also fixes the typo in the `.debug_frame` section name
which incorrectly contained a trailing `s`.
Differential revision: https://reviews.llvm.org/D37852
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313530 91177308-0d34-0410-b5e6-96231b3b80d8
This is the first of many commits that enable selectively dumping just
one record from the debug info.
This reapplies r313412 with some extra qualification to appease GCC and MSVC.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313419 91177308-0d34-0410-b5e6-96231b3b80d8
Since users typically don't really care about the .dwo / non.dwo
distinction, this patch makes it so dwarfdump --debug-<info,...> dumps
.debug_info and (if available) also .debug_info.dwo. This simplifies
the command line interface (I've removed all dwo-specific dump
options) and makes the tool friendlier to use.
Differential Revision: https://reviews.llvm.org/D37771
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313207 91177308-0d34-0410-b5e6-96231b3b80d8
This is a feature supported by Darwin dwarfdump. UUIDs are used to
associate executables with their .dSYM bundles.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313165 91177308-0d34-0410-b5e6-96231b3b80d8
This patches renames "brief" to "verbose" in de DIDumpOptions and
inverts the logic to match the new behavior where brief is the default.
Changing the default value uncovered some bugs related to the
DIDumpOptions not being propagated and have been fixed as well.
Differential revision: https://reviews.llvm.org/D37745
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313139 91177308-0d34-0410-b5e6-96231b3b80d8
As discussed on llvm-dev in
http://lists.llvm.org/pipermail/llvm-dev/2017-September/117301.html
this changes the command line interface of llvm-dwarfdump to match the
one used by the dwarfdump utility shipping on macOS. In addition to
being shorter to type this format also has the advantage of allowing
more than one section to be specified at the same time.
In a nutshell, with this change
$ llvm-dwarfdump --debug-dump=info
$ llvm-dwarfdump --debug-dump=apple-objc
becomes
$ dwarfdump --debug-info --apple-objc
Differential Revision: https://reviews.llvm.org/D37714
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@312970 91177308-0d34-0410-b5e6-96231b3b80d8
This patch changes the default behavior in brief mode to only show the
debug_info section. This is undoubtedly the most popular and likely the
one you'd want in brief mode.
Non-brief mode behavior is not affected and still defaults to all.
Differential revision: https://reviews.llvm.org/D37334
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@312252 91177308-0d34-0410-b5e6-96231b3b80d8
This moves the cmake configuration for fuzzers in LLVM to a new macro,
add_llvm_fuzzer. This will make it easier to keep things consistent
while implementing llvm.org/pr34314.
I've also made a couple of minor functional changes here:
- the fuzzers now use add_llvm_executable rather than add_llvm_tool.
This means they won't create install targets and stuff like that,
because those made little sense for these fuzzers.
- I've grouped these under "Fuzzers" rather than in with "Tools" for
people who build with IDEs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@312200 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Based on Fred's patch here: https://reviews.llvm.org/D6771
I can't seem to commandeer the old review, so I'm creating a new one.
With that change the locations exrpessions are pretty printed inline in the
DIE tree. The output looks like this for debug_loc entries:
DW_AT_location [DW_FORM_data4] (0x00000000
0x0000000000000001 - 0x000000000000000b: DW_OP_consts +3
0x000000000000000b - 0x0000000000000012: DW_OP_consts +7
0x0000000000000012 - 0x000000000000001b: DW_OP_reg0 RAX, DW_OP_piece 0x4
0x000000000000001b - 0x0000000000000024: DW_OP_breg5 RDI+0)
And like this for debug_loc.dwo entries:
DW_AT_location [DW_FORM_sec_offset] (0x00000000
Addr idx 2 (w/ length 190): DW_OP_consts +0, DW_OP_stack_value
Addr idx 3 (w/ length 23): DW_OP_reg0 RAX, DW_OP_piece 0x4)
Simple locations without ranges are printed inline:
DW_AT_location [DW_FORM_block1] (DW_OP_reg4 RSI, DW_OP_piece 0x4, DW_OP_bit_piece 0x20 0x0)
The debug_loc(.dwo) dumping in changed accordingly to factor the code.
Reviewers: dblaikie, aprantl, friss
Subscribers: mgorny, javed.absar, hiraditya, llvm-commits, JDevlieghere
Differential Revision: https://reviews.llvm.org/D37123
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@312042 91177308-0d34-0410-b5e6-96231b3b80d8
This changes DwarfContext to delegate to DwarfObject instead of having
pure virtual methods.
With this DwarfContextInMemory is replaced with an implementation of
DwarfObject that is local to a .cpp file.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@308543 91177308-0d34-0410-b5e6-96231b3b80d8
This patch introduces a new command line option, called brief, to
llvm-dwarfdump. When -brief is used, the attribute forms for the
.debug_info section will not be emitted to output.
Patch by Spyridoula Gravani!
rdar://problem/21474365
Differential Revision: https://reviews.llvm.org/D33867
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@304844 91177308-0d34-0410-b5e6-96231b3b80d8
lldb-dwarfdump gets a new "--verify" option that will verify a single file's DWARF debug info and will print out any errors that it finds. It will return an non-zero exit status if verification fails, and a zero exit status if verification succeeds. Adding the --quiet option will suppress any output the STDOUT or STDERR.
The first part of the verify does the following:
- verifies that all CU relative references (DW_FORM_ref1, DW_FORM_ref2, DW_FORM_ref4, DW_FORM_ref8, DW_FORM_ref_udata) have valid CU offsets
- verifies that all DW_FORM_ref_addr references have valid .debug_info offsets
- verifies that all DW_AT_ranges attributes have valid .debug_ranges offsets
- verifies that all DW_AT_stmt_list attributes have valid .debug_line offsets
- verifies that all DW_FORM_strp attributes have valid .debug_str offsets
Unit tests were added for each of the above cases.
Differential Revision: https://reviews.llvm.org/D32707
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@301844 91177308-0d34-0410-b5e6-96231b3b80d8
Jonas Devlieghere