Add support for inline assembly with matching input operand that do not
naturally go in the register class it is constrained to (eg. double in a
32-bit GPR). Note that regular input is already handled by existing
code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@338206 91177308-0d34-0410-b5e6-96231b3b80d8
This seems like a pretty glaring omission, and AMDGPU
wants to treat kernels differently from other calling
conventions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@338194 91177308-0d34-0410-b5e6-96231b3b80d8
Masked loads are calling DAG.getRoot rather than calling SelectionDAGBuilder::getRoot, which means the PendingLoads weren't emptied to update the root and create any needed TokenFactor. So it would be incorrect to call setRoot for the masked load.
This patch instead adds the masked load to PendingLoads so that the root doesn't get update until a store or scatter or something happens.. Alternatively, we could call SelectionDAGBuilder::getRoot before it, but that would create unnecessary serialization.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@338085 91177308-0d34-0410-b5e6-96231b3b80d8
LowerDbgDeclare inserts a dbg.value before each use of an address
described by a dbg.declare. When inserting a dbg.value before a CallInst
use, however, it fails to append DW_OP_deref to the DIExpression.
The DW_OP_deref is needed to reflect the fact that a dbg.value describes
a source variable directly (as opposed to a dbg.declare, which relies on
pointer indirection).
This patch adds in the DW_OP_deref where needed. This results in the
correct values being shown during a debug session for a program compiled
with ASan and optimizations (see https://reviews.llvm.org/D49520). Note
that ConvertDebugDeclareToDebugValue is already correct -- no changes
there were needed.
One complication is that SelectionDAG is unable to distinguish between
direct and indirect frame-index (FRAMEIX) SDDbgValues. This patch also
fixes this long-standing issue in order to not regress integration tests
relying on the incorrect assumption that all frame-index SDDbgValues are
indirect. This is a necessary fix: the newly-added DW_OP_derefs cannot
be lowered properly otherwise. Basically the fix prevents a direct
SDDbgValue with DIExpression(DW_OP_deref) from being dereferenced twice
by a debugger. There were a handful of tests relying on this incorrect
"FRAMEIX => indirect" assumption which actually had incorrect
DW_AT_locations: these are all fixed up in this patch.
Testing:
- check-llvm, and an end-to-end test using lldb to debug an optimized
program.
- Existing unit tests for DIExpression::appendToStack fully cover the
new DIExpression::append utility.
- check-debuginfo (the debug info integration tests)
Differential Revision: https://reviews.llvm.org/D49454
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@338069 91177308-0d34-0410-b5e6-96231b3b80d8
Add support for inline assembly with output operand that do not
naturally go in the register class it is constrained to (eg. double in a
32-bit GPR as in the PR).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@337903 91177308-0d34-0410-b5e6-96231b3b80d8
This avoids approx. 2 x 10^5 DenseMap insertions in both non-debug and
debug -O2 builds of the sqlite3 amalgamation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@337751 91177308-0d34-0410-b5e6-96231b3b80d8
This is used on an extract vector element index which is most cases is going to be an i32 or i64 and the element will be a valid element number. But it is possible to construct IR with a larger type and large out of range value.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@337652 91177308-0d34-0410-b5e6-96231b3b80d8
As discussed here:
http://lists.llvm.org/pipermail/llvm-dev/2018-May/123292.htmlhttp://lists.llvm.org/pipermail/llvm-dev/2018-July/124400.html
We want to add rotate intrinsics because the IR expansion of that pattern is 4+ instructions,
and we can lose pieces of the pattern before it gets to the backend. Generalizing the operation
by allowing 2 different input values (plus the 3rd shift/rotate amount) gives us a "funnel shift"
operation which may also be a single hardware instruction.
Initially, I thought we needed to define new DAG nodes for these ops, and I spent time working
on that (much larger patch), but then I concluded that we don't need it. At least as a first
step, we have all of the backend support necessary to match these ops...because it was required.
And shepherding these through the IR optimizer is the primary concern, so the IR intrinsics are
likely all that we'll ever need.
There was also a question about converting the intrinsics to the existing ROTL/ROTR DAG nodes
(along with improving the oversized shift documentation). Again, I don't think that's strictly
necessary (as the test results here prove). That can be an efficiency improvement as a small
follow-up patch.
So all we're left with is documentation, definition of the IR intrinsics, and DAG builder support.
Differential Revision: https://reviews.llvm.org/D49242
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@337221 91177308-0d34-0410-b5e6-96231b3b80d8
This is marginally helpful for removing redundant extensions, and the
code is easier to read, so it seems like an all-around win. In the new
test i8-phi-ext.ll, we used to emit an AssertSext i8; now we emit an
AssertZext i2, which allows the extension of the return value to be
eliminated.
Differential Revision: https://reviews.llvm.org/D49004
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@336868 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This patch introduce new intrinsic -
strip.invariant.group that was described in the
RFC: Devirtualization v2
Reviewers: rsmith, hfinkel, nlopes, sanjoy, amharc, kuhar
Subscribers: arsenm, nhaehnle, JDevlieghere, hiraditya, xbolva00, llvm-commits
Differential Revision: https://reviews.llvm.org/D47103
Co-authored-by: Krzysztof Pszeniczny <krzysztof.pszeniczny@gmail.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@336073 91177308-0d34-0410-b5e6-96231b3b80d8
Add NoTrapAfterNoreturn target option which skips emission of traps
behind noreturn calls even if TrapUnreachable is enabled.
Enable the feature on Mach-O to save code size; Comments suggest it is
not possible to enable it for the other users of TrapUnreachable.
rdar://41530228
DifferentialRevision: https://reviews.llvm.org/D48674
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@335877 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
In some cases, these operands lacked the IsDebug property, which is meant to signal that
they should not affect codegen. This patch adds a check for this property in the
MachineVerifier and adds it where it was missing.
This includes refactorings to use MachineInstrBuilder construction functions instead of
manually setting up the intrinsic everywhere.
Patch by: JesperAntonsson
Reviewers: aprantl, rnk, echristo, javed.absar
Reviewed By: aprantl
Subscribers: qcolombet, sdardis, nemanjai, JDevlieghere, atanasyan, llvm-commits
Differential Revision: https://reviews.llvm.org/D48319
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@335214 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
If we get an error building the SelectionDAG for inline assembly we try to continue and still build the DAG.
But if the return type for the inline assembly is a struct we end up crashing because we try to create an UNDEF node with a struct type which isn't valid.
Instead we need to create an UNDEF for each element of the struct and join them with merge_values.
This patch relies on single operand merge_values being handled gracefully by getMergeValues. If the return type is void there will be no VTs returned by ComputeValueVTs and now we just return instead of calling setValue. Hopefully that's ok, I assumed nothing would need to look up the mapped value for void node.
Fixes PR37359
Reviewers: rengolin, rovka, echristo, efriedma, bogner
Reviewed By: efriedma
Subscribers: craig.topper, llvm-commits
Differential Revision: https://reviews.llvm.org/D46560
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@335093 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This lowers exception catching-related instructions:
1. Lowers `wasm.catch` intrinsic to `catch` instruction
2. Removes `catchpad` and `cleanuppad` instructions; they are not
necessary after isel phase. (`MachineBasicBlock::isEHFuncletEntry()` or
`MachineBasicBlock::isEHPad()` can be used instead.)
3. Lowers `catchret` and `cleanupret` instructions to pseudo `catchret`
and `cleanupret` instructions in isel, which will be replaced with other
instructions in `WebAssemblyExceptionPrepare` pass.
4. Adds 'WebAssemblyExceptionPrepare` pass, which is for running various
transformation for EH. Currently this pass only replaces `catchret` and
`cleanupret` instructions into appropriate wasm instructions to make
this patch successfully run until the end.
Currently this does not handle lowering of intrinsics related to LSDA
info generation (`wasm.landingpad.index` and `wasm.lsda`), because they
cannot be tested without implementing `EHStreamer`'s wasm-specific
handlers. They are marked as TODO, which is needed to make isel pass.
Also this does not generate `try` and `end_try` markers yet, which will
be handled in later patches.
This patch is based on the first wasm EH proposal.
(https://github.com/WebAssembly/exception-handling/blob/master/proposals/Exceptions.md)
Reviewers: dschuff, majnemer
Subscribers: jfb, sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D44090
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@333705 91177308-0d34-0410-b5e6-96231b3b80d8
There seems to be no real reason to have these separate copies.
The existing implementations just copy each other for x86.
For Mips there is a subtle difference, which is just a bug
since it changes based on the context where which one was called.
Dropping this version, all tests pass. If I try to merge them
to match the removed version, a test fails.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@333440 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
There are functions using the term 'funclet' to refer to both
1. an EH scopes, the structure of BBs that starts with
catchpad/cleanuppad and ends with catchret/cleanupret, and
2. a small function that gets outlined in AsmPrinter, which is the
original meaning of 'funclet'.
So far the two have been the same thing; EH scopes are always outlined
in AsmPrinter as funclets at the end of the compilation pipeline. But
now wasm also uses scope-based EH but does not outline those, so we now
need to correctly distinguish those two use cases in functions.
This patch splits `MachineBasicBlock::isFuncletEntry` into
`isFuncletEntry` and `isEHScopeEntry`, and
`MachineFunction::hasFunclets` into `hasFunclets` and `hasEHScopes`, in
order to distinguish the two different use cases. And this also changes
some uses of the term 'funclet' to 'scope' in `getFuncletMembership` and
change the function name to `getEHScopeMembership` because this function
is not about outlined funclets but about EH scope memberships.
This change is in the same vein as D45559.
Reviewers: majnemer, dschuff
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D47005
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@333045 91177308-0d34-0410-b5e6-96231b3b80d8
This is a simple hack based on what's proposed in D37686, but we can extend it if needed in follow-ups.
It gets us most of the FMF functionality that we want without adding any state bits to the flags. It
also intentionally leaves out non-FMF flags (nsw, etc) to minimize the patch.
It should provide a superset of the functionality from D46563 - the extra tests show propagation and
codegen diffs for fcmp, vecreduce, and FP libcalls.
The PPC log2() test shows the limits of this most basic approach - we only applied 'afn' to the last
node created for the call. AFAIK, there aren't any libcall optimizations based on the flags currently,
so that shouldn't make any difference.
Differential Revision: https://reviews.llvm.org/D46854
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@332358 91177308-0d34-0410-b5e6-96231b3b80d8
The DEBUG() macro is very generic so it might clash with other projects.
The renaming was done as follows:
- git grep -l 'DEBUG' | xargs sed -i 's/\bDEBUG\s\?(/LLVM_DEBUG(/g'
- git diff -U0 master | ../clang/tools/clang-format/clang-format-diff.py -i -p1 -style LLVM
- Manual change to APInt
- Manually chage DOCS as regex doesn't match it.
In the transition period the DEBUG() macro is still present and aliased
to the LLVM_DEBUG() one.
Differential Revision: https://reviews.llvm.org/D43624
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@332240 91177308-0d34-0410-b5e6-96231b3b80d8
There's only one use of this currently, but that could
change with D46563. Either way, we shouldn't have to
update code outside of the flags struct when those
flag definitions change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@332155 91177308-0d34-0410-b5e6-96231b3b80d8
This commit adds a wrapper for std::distance() which works with ranges.
As it would be a common case to write `distance(predecessors(BB))`, this
also introduces `pred_size()` and `succ_size()` helpers to make that
easier to write.
Differential Revision: https://reviews.llvm.org/D46668
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@332057 91177308-0d34-0410-b5e6-96231b3b80d8
In order to convert LLVM IR to MachineInstr, we need a new TargetOpcode,
DBG_LABEL, to ‘lower’ intrinsic llvm.dbg.label. The patch
creates this new TargetOpcode and convert intrinsic llvm.dbg.label to
MachineInstr through SelectionDAG.
In SelectionDAG, debug information is stored in SDDbgInfo. We create a
new data member of SDDbgInfo for labels and use the new data member,
SDDbgLabel, to create DBG_LABEL MachineInstr.
The new DBG_LABEL MachineInstr uses label metadata from LLVM IR as its
parameter. So, the backend could get metadata information of labels from
DBG_LABEL MachineInstr.
Differential Revision: https://reviews.llvm.org/D45341
Patch by Hsiangkai Wang.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@331842 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: Adding support for Fast flags in the SDNode to leverage fast math sub flag usage.
Reviewers: spatel, arsenm, jbhateja, hfinkel, escha, qcolombet, echristo, wristow, javed.absar
Reviewed By: spatel
Subscribers: llvm-commits, rampitec, nhaehnle, tstellar, FarhanaAleen, nemanjai, javed.absar, jbhateja, hfinkel, wdng
Differential Revision: https://reviews.llvm.org/D45710
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@331547 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Added a helper method in RegsForValue to get a list with
all the <RegNumber, RegSize> pairs that we want to iterate
over in SelectionDAGBuilder::EmitFuncArgumentDbgValue and
in SelectionDAGBuilder::visitIntrinsicCall.
Reviewers: vsk
Reviewed By: vsk
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D46360
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@331510 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This reverts SVN r331441 (reapplies r331337), together with a fix
in to handle an already existing fragment expression in the
dbg.value that must be fragmented due to a split PHI node.
This should solve the problem seen in PR37321, which was the
reason for the revert of r331337.
The situation in PR37321 is that we have a PHI node like this
%u.sroa = phi i80 [ %u.sroa.x, %if.x ],
[ %u.sroa.y, %if.y ],
[ %u.sroa.z, %if.z ]
and a dbg.value like this
call void @llvm.dbg.value(metadata i80 %u.sroa,
metadata !13,
metadata !DIExpression(DW_OP_LLVM_fragment, 0, 80))
The phi node is split into three 32-bit PHI nodes
%30:gr32 = PHI %11:gr32, %bb.4, %14:gr32, %bb.5, %27:gr32, %bb.8
%31:gr32 = PHI %12:gr32, %bb.4, %15:gr32, %bb.5, %28:gr32, %bb.8
%32:gr32 = PHI %13:gr32, %bb.4, %16:gr32, %bb.5, %29:gr32, %bb.8
but since the original value only is 80 bits we need to adjust the size
of the last fragment expression, and with this patch we get
DBG_VALUE debug-use %30:gr32, debug-use $noreg, !"u", !DIExpression(DW_OP_LLVM_fragment, 0, 32)
DBG_VALUE debug-use %31:gr32, debug-use $noreg, !"u", !DIExpression(DW_OP_LLVM_fragment, 32, 32)
DBG_VALUE debug-use %32:gr32, debug-use $noreg, !"u", !DIExpression(DW_OP_LLVM_fragment, 64, 16)
Reviewers: vsk, aprantl, mstorsjo
Reviewed By: aprantl
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D46384
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@331464 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This is a follow up to rL331182. A PHI node can be split up into
several MIR PHI nodes when being selected. When there is a
dbg.value intrinsic that uses the result of such a PHI node we
need to select several DBG_VALUE instructions, with fragment
expressions, in order to do a correct selection.
Reviewers: rnk, aprantl, vsk
Reviewed By: vsk
Subscribers: mattd, llvm-commits, JDevlieghere, aprantl, gbedwell, rnk
Tags: #debug-info
Differential Revision: https://reviews.llvm.org/D46329
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@331337 91177308-0d34-0410-b5e6-96231b3b80d8
We've been running doxygen with the autobrief option for a couple of
years now. This makes the \brief markers into our comments
redundant. Since they are a visual distraction and we don't want to
encourage more \brief markers in new code either, this patch removes
them all.
Patch produced by
for i in $(git grep -l '\\brief'); do perl -pi -e 's/\\brief //g' $i & done
Differential Revision: https://reviews.llvm.org/D46290
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@331272 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
When building the selection DAG at ISel all PHI nodes are
selected and lowered to Machine Instruction PHI nodes before
we start to create any SDNodes. So there are no SDNodes for
values produced by the PHI nodes.
In the past when selecting a dbg.value intrinsic that uses
the value produced by a PHI node we have been handling such
dbg.value intrinsics as "dangling debug info". I.e. we have
not created a SDDbgValue node directly, because there is
no existing SDNode for the PHI result, instead we deferred
the creationg of a SDDbgValue until we found the first use
of the PHI result.
The old solution had a couple of flaws. The position of the
selected DBG_VALUE instruction would end up quite late in a
basic block, and for example not directly after the PHI node
as in the LLVM IR input. And in case there were no use at all
in the basic block the dbg.value could be dropped completely.
This patch introduces a new VREG kind of SDDbgValue nodes.
It is similar to a SDNODE kind of node, but it refers directly
to a virtual register and not a SDNode. When we do selection
for a dbg.value that is using the result of a PHI node we
can do a lookup of the virtual register directly (as it already
is determined for the PHI node) and create a SDDbgValue node
immediately instead of delaying the selection until we find a
use.
This should fix a problem with losing debug info at ISel
as seen in PR37234 (https://bugs.llvm.org/show_bug.cgi?id=37234).
It does not resolve PR37234 completely, because the debug info
is dropped later on in the BranchFolder (see D46184).
Reviewers: #debug-info, aprantl
Reviewed By: #debug-info, aprantl
Subscribers: rnk, gbedwell, aprantl, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D46129
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@331182 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This just refactors the lowering of the atomic memory intrinsics to more
closely match the code patterns used in the lowering of the non-atomic
memory intrinsics. Specifically, we encapsulate the lowering in
SelectionDAG::getAtomicMem*() functions rather than embedding
the code directly in the SelectionDAGBuilder code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@330603 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Add an LLVM intrinsic for type discriminated event logging with XRay.
Similar to the existing intrinsic for custom events, but also accepts
a type tag argument to allow plugins to be aware of different types
and semantically interpret logged events they know about without
choking on those they don't.
Relies on a symbol defined in compiler-rt patch D43668. I may wait
to submit before I can see demo everything working together including
a still to come clang patch.
Reviewers: dberris, pelikan, eizan, rSerge, timshen
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D45633
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@330219 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
r327219 added wrappers to std::sort which randomly shuffle the container before sorting.
This will help in uncovering non-determinism caused due to undefined sorting
order of objects having the same key.
To make use of that infrastructure we need to invoke llvm::sort instead of std::sort.
Note: This patch is one of a series of patches to replace *all* std::sort to llvm::sort.
Refer the comments section in D44363 for a list of all the required patches.
Reviewers: bogner, rnk, MatzeB, RKSimon
Reviewed By: rnk
Subscribers: JDevlieghere, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D45133
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@329435 91177308-0d34-0410-b5e6-96231b3b80d8
Currently EVT is in the IR layer only because of Function.cpp needing a very small piece of the functionality of EVT::getEVTString(). The rest of EVT is used in codegen making CodeGen a better place for it.
The previous code converted a Type* to EVT and then called getEVTString. This was only expected to handle the primitive types from Type*. Since there only a few primitive types, we can just print them as strings directly.
Differential Revision: https://reviews.llvm.org/D45017
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@328806 91177308-0d34-0410-b5e6-96231b3b80d8
This is used by llvm tblgen as well as by LLVM Targets, so the only
common place is Support for now. (maybe we need another target for these
sorts of things - but for now I'm at least making them correct & we can
make them better if/when people have strong feelings)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@328395 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
When building the selection DAG we sometimes need to postpone
the handling of a dbg.value until the value it should refer to
is created. This is done by using the DanglingDebugInfoMap.
In the past this map has been limited to hold one dangling
dbg.value per value. This patch removes that restriction.
Reviewers: aprantl, rnk, probinson, vsk
Reviewed By: aprantl
Subscribers: Ka-Ka, llvm-commits, JDevlieghere
Tags: #debug-info
Differential Revision: https://reviews.llvm.org/D44610
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@328084 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This change is part of step five in the series of changes to remove alignment argument from
memcpy/memmove/memset in favour of alignment attributes. In particular, this changes the
SelectionDAGBuilder to cease using the old getAlignment() API of MemoryIntrinsic in favour of getting
source & dest specific alignments through the new API.
Steps:
Step 1) Remove alignment parameter and create alignment parameter attributes for
memcpy/memmove/memset. ( rL322965, rC322964, rL322963 )
Step 2) Expand the IRBuilder API to allow creation of memcpy/memmove with differing
source and dest alignments. ( rL323597 )
Step 3) Update Clang to use the new IRBuilder API. ( rC323617 )
Step 4) Update Polly to use the new IRBuilder API. ( rL323618 )
Step 5) Update LLVM passes that create memcpy/memmove calls to use the new IRBuilder API,
and those that use use MemIntrinsicInst::[get|set]Alignment() to use [get|set]DestAlignment()
and [get|set]SourceAlignment() instead. ( rL323886, rL323891, rL324148, rL324273, rL324278,
rL324384, rL324395, rL324402, rL324626, rL324642, rL324653, rL324654, rL324773, rL324774,
rL324781, rL324784, rL324955, rL324960, rL325816, rL327398 )
Step 6) Remove the single-alignment IRBuilder API for memcpy/memmove, and the
MemIntrinsicInst::[get|set]Alignment() methods.
Reference
http://lists.llvm.org/pipermail/llvm-dev/2015-August/089384.htmlhttp://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20151109/312083.html
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@327421 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
1) Make sure to discard dangling debug info if the variable (or
variable fragment) is mapped to something new before we had a
chance to resolve the dangling debug info.
2) When resolving debug info, make sure to bump the associated
SDNodeOrder to ensure that the DBG_VALUE is emitted after the
instruction that defines the value used in the DBG_VALUE.
This will avoid a debug-use before def scenario as seen in
https://bugs.llvm.org/show_bug.cgi?id=36417.
The new test case, test/DebugInfo/X86/sdag-dangling-dbgvalue.ll,
show some other limitations in how dangling debug info is
handled in the SelectionDAG. Since we currently only support
having one dangling dbg.value per Value, we will end up dropping
debug info when there are more than one variable that is described
by the same "dangling value".
Reviewers: aprantl
Reviewed By: aprantl
Subscribers: aprantl, eraman, llvm-commits, JDevlieghere
Tags: #debug-info
Differential Revision: https://reviews.llvm.org/D44369
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@327303 91177308-0d34-0410-b5e6-96231b3b80d8
The retpoline mitigation for variant 2 of CVE-2017-5715 inhibits the
branch predictor, and as a result it can lead to a measurable loss of
performance. We can reduce the performance impact of retpolined virtual
calls by replacing them with a special construct known as a branch
funnel, which is an instruction sequence that implements virtual calls
to a set of known targets using a binary tree of direct branches. This
allows the processor to speculately execute valid implementations of the
virtual function without allowing for speculative execution of of calls
to arbitrary addresses.
This patch extends the whole-program devirtualization pass to replace
certain virtual calls with calls to branch funnels, which are
represented using a new llvm.icall.jumptable intrinsic. It also extends
the LowerTypeTests pass to recognize the new intrinsic, generate code
for the branch funnels (x86_64 only for now) and lay out virtual tables
as required for each branch funnel.
The implementation supports full LTO as well as ThinLTO, and extends the
ThinLTO summary format used for whole-program devirtualization to
support branch funnels.
For more details see RFC:
http://lists.llvm.org/pipermail/llvm-dev/2018-January/120672.html
Differential Revision: https://reviews.llvm.org/D42453
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@327163 91177308-0d34-0410-b5e6-96231b3b80d8
Making a width of GEP Index, which is used for address calculation, to be one of the pointer properties in the Data Layout.
p[address space]:size:memory_size:alignment:pref_alignment:index_size_in_bits.
The index size parameter is optional, if not specified, it is equal to the pointer size.
Till now, the InstCombiner normalized GEPs and extended the Index operand to the pointer width.
It works fine if you can convert pointer to integer for address calculation and all registered targets do this.
But some ISAs have very restricted instruction set for the pointer calculation. During discussions were desided to retrieve information for GEP index from the Data Layout.
http://lists.llvm.org/pipermail/llvm-dev/2018-January/120416.html
I added an interface to the Data Layout and I changed the InstCombiner and some other passes to take the Index width into account.
This change does not affect any in-tree target. I added tests to cover data layouts with explicitly specified index size.
Differential Revision: https://reviews.llvm.org/D42123
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@325102 91177308-0d34-0410-b5e6-96231b3b80d8
When a function return value can't be directly lowered, such as
returning an i128 on WebAssembly, as indicated by the CanLowerReturn
target hook, SelectionDAGBuilder can translate it to return the
value through a hidden sret-like argument.
If such a function has an argument with the "returned" attribute,
the attribute can't be automatically lowered, because the function
no longer has a normal return value. For now, just discard the
"returned" attribute.
This fixes PR36128.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@323715 91177308-0d34-0410-b5e6-96231b3b80d8
