This allows later passes (in particular InstCombine) to optimize more
cases.
One that's important to us is `memcmp(p, q, constant) < 0` and memcmp(p, q, constant) > 0.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@364412 91177308-0d34-0410-b5e6-96231b3b80d8
Use -fsave-optimization-record=<format> to specify a different format
than the default, which is YAML.
For now, only YAML is supported.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@363573 91177308-0d34-0410-b5e6-96231b3b80d8
* Add a common function to setup opt-remarks
* Rename common options to the same names
* Add error types to distinguish between file errors and regex errors
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@363415 91177308-0d34-0410-b5e6-96231b3b80d8
* Add a common function to setup opt-remarks
* Rename common options to the same names
* Add error types to distinguish between file errors and regex errors
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@363328 91177308-0d34-0410-b5e6-96231b3b80d8
This was using its own, outdated list of possible captures. This was
at minimum not catching cmpxchg and addrspacecast captures.
One change is now any volatile access is treated as capturing. The
test coverage for this pass is quite inadequate, but this required
removing volatile in the lifetime capture test.
Also fixes some infrastructure issues to allow running just the IR
pass.
Fixes bug 42238.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@363169 91177308-0d34-0410-b5e6-96231b3b80d8
Patch which introduces a target-independent framework for generating
hardware loops at the IR level. Most of the code has been taken from
PowerPC CTRLoops and PowerPC has been ported over to use this generic
pass. The target dependent parts have been moved into
TargetTransformInfo, via isHardwareLoopProfitable, with
HardwareLoopInfo introduced to transfer information from the backend.
Three generic intrinsics have been introduced:
- void @llvm.set_loop_iterations
Takes as a single operand, the number of iterations to be executed.
- i1 @llvm.loop_decrement(anyint)
Takes the maximum number of elements processed in an iteration of
the loop body and subtracts this from the total count. Returns
false when the loop should exit.
- anyint @llvm.loop_decrement_reg(anyint, anyint)
Takes the number of elements remaining to be processed as well as
the maximum numbe of elements processed in an iteration of the loop
body. Returns the updated number of elements remaining.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@362774 91177308-0d34-0410-b5e6-96231b3b80d8
Separate the remark serialization to YAML from the LLVM Diagnostics.
This adds a new serialization abstraction: remarks::Serializer. It's
completely independent from lib/IR and it provides an easy way to
replace YAML by providing a new remarks::Serializer.
Differential Revision: https://reviews.llvm.org/D62632
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@362160 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
For the most part this consists of replacing ${LLVM_TARGETS_TO_BUILD} with
some combination of AllTargets* so that they depend on specific components
of a target backend rather than all of it. The overall effect of this is
that, for example, tools like opt no longer falsely depend on the
disassembler, while tools like llvm-ar no longer depend on the code
generator.
There's a couple quirks to point out here:
* AllTargetsCodeGens is a bit more prevalent than expected. Tools like dsymutil
seem to need it which I was surprised by.
* llvm-xray linked to all the backends but doesn't seem to need any of them.
It builds and passes the tests so that seems to be correct.
* I left gold out as it's not built when binutils is not available so I'm
unable to test it
Reviewers: bogner, JDevlieghere
Reviewed By: bogner
Subscribers: mehdi_amini, mgorny, steven_wu, dexonsmith, rupprecht, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62331
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@361567 91177308-0d34-0410-b5e6-96231b3b80d8
TypedDINodeRef<T> is a redundant wrapper of Metadata * that is actually a T *.
Accordingly, change DI{Node,Scope,Type}Ref uses to DI{Node,Scope,Type} * or their const variants.
This allows us to delete many resolve() calls that clutter the code.
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D61369
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@360108 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
When refactoring vectorization flags, vectorization was disabled by default in the new pass manager.
This patch re-enables is for both managers, and changes the assumptions opt makes, based on the new defaults.
Comments in opt.cpp should clarify the intended use of all flags to enable/disable vectorization.
Reviewers: chandlerc, jgorbe
Subscribers: jlebar, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61091
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@359167 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Trying to add the plumbing necessary to add tuning options to the new pass manager.
Testing with the flags for loop vectorize.
Reviewers: chandlerc
Subscribers: sanjoy, mehdi_amini, jlebar, steven_wu, dexonsmith, dang, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59723
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@358763 91177308-0d34-0410-b5e6-96231b3b80d8
Removes the code from opt and the pass manager builder.
The code was unused - even by the C library code that was supposed to set
it and had been removed previously.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@358024 91177308-0d34-0410-b5e6-96231b3b80d8
Currently we have -Rpass for filtering the remarks that are displayed as
diagnostics, but when using -fsave-optimization-record, there is no way
to filter the remarks while generating them.
This adds support for filtering remarks by passes using a regex.
Ex: `clang -fsave-optimization-record -foptimization-record-passes=inline`
will only emit the remarks coming from the pass `inline`.
This adds:
* `-fsave-optimization-record` to the driver
* `-opt-record-passes` to cc1
* `-lto-pass-remarks-filter` to the LTOCodeGenerator
* `--opt-remarks-passes` to lld
* `-pass-remarks-filter` to llc, opt, llvm-lto, llvm-lto2
* `-opt-remarks-passes` to gold-plugin
Differential Revision: https://reviews.llvm.org/D59268
Original llvm-svn: 355964
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@355984 91177308-0d34-0410-b5e6-96231b3b80d8
Currently we have -Rpass for filtering the remarks that are displayed as
diagnostics, but when using -fsave-optimization-record, there is no way
to filter the remarks while generating them.
This adds support for filtering remarks by passes using a regex.
Ex: `clang -fsave-optimization-record -foptimization-record-passes=inline`
will only emit the remarks coming from the pass `inline`.
This adds:
* `-fsave-optimization-record` to the driver
* `-opt-record-passes` to cc1
* `-lto-pass-remarks-filter` to the LTOCodeGenerator
* `--opt-remarks-passes` to lld
* `-pass-remarks-filter` to llc, opt, llvm-lto, llvm-lto2
* `-opt-remarks-passes` to gold-plugin
Differential Revision: https://reviews.llvm.org/D59268
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@355964 91177308-0d34-0410-b5e6-96231b3b80d8
This allows us to store more info about where we're emitting the remarks
without cluttering LLVMContext. This is needed for future support for
the remark section.
Differential Revision: https://reviews.llvm.org/D58996
Original llvm-svn: 355507
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@355514 91177308-0d34-0410-b5e6-96231b3b80d8
Partly addresses PR15026.
There are a few tests that passed in invalid architectures, which are fixed in: rL355349 and D58931
Reviewers: echristo, efriedma, rengolin, atrick
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D58933
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@355455 91177308-0d34-0410-b5e6-96231b3b80d8
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@351636 91177308-0d34-0410-b5e6-96231b3b80d8
Currently we have pgo options defined in PassManagerBuilder.cpp only for
instrument pgo, but not for sample pgo. We also have pgo options defined
in NewPMDriver.cpp in opt only for new pass manager and for all kinds of
pgo. They have some inconsistency.
To make the options more consistent and make tests writing easier, the
patch let old pass manager to share the same pgo options with new pass
manager in opt, and removes the options in PassManagerBuilder.cpp.
Differential Revision: https://reviews.llvm.org/D56749
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@351392 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Records in the module summary index whether the bitcode was compiled
with the option necessary to enable splitting the LTO unit
(e.g. -fsanitize=cfi, -fwhole-program-vtables, or -fsplit-lto-unit).
The information is passed down to the ModuleSummaryIndex builder via a
new module flag "EnableSplitLTOUnit", which is propagated onto a flag
on the summary index.
This is then used during the LTO link to check whether all linked
summaries were built with the same value of this flag. If not, an error
is issued when we detect a situation requiring whole program visibility
of the class hierarchy. This is the case when both of the following
conditions are met:
1) We are performing LowerTypeTests or Whole Program Devirtualization.
2) There are type tests or type checked loads in the code.
Note I have also changed the ThinLTOBitcodeWriter to also gate the
module splitting on the value of this flag.
Reviewers: pcc
Subscribers: ormris, mehdi_amini, Prazek, inglorion, eraman, steven_wu, dexonsmith, arphaman, dang, llvm-commits
Differential Revision: https://reviews.llvm.org/D53890
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@350948 91177308-0d34-0410-b5e6-96231b3b80d8
This will hold flags specific to subprograms. In the future
we could potentially free up scarce bits in DIFlags by moving
subprogram-specific flags from there to the new flags word.
This patch does not change IR/bitcode formats, that will be
done in a follow-up.
Differential Revision: https://reviews.llvm.org/D54597
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@347239 91177308-0d34-0410-b5e6-96231b3b80d8
This patch defines an interleaved-load-combine pass. The pass searches
for ShuffleVector instructions that represent interleaved loads. Matches are
converted such that they will be captured by the InterleavedAccessPass.
The pass extends LLVMs capabilities to use target specific instruction
selection of interleaved load patterns (e.g.: ld4 on Aarch64
architectures).
Differential Revision: https://reviews.llvm.org/D52653
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@347208 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
It turns out that we need an OptimizerLast PassBuilder extension point
after all. I missed the relevance of this EP the first time. By legacy PM magic,
function passes added at this EP get added to the last _Function_ PM, which is a
feature we lost when dropping this EP for the new PM.
A key difference between this and the legacy PassManager's OptimizerLast
callback is that this extension point is not triggered at O0. Extensions
to the O0 pipeline should append their passes to the end of the overall
pipeline.
Differential Revision: https://reviews.llvm.org/D54374
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@346645 91177308-0d34-0410-b5e6-96231b3b80d8
All the PassBuilder::parse interfaces now return descriptive StringError
instead of a plain bool. It allows to make -passes/aa-pipeline parsing
errors context-specific and thus less confusing.
TODO: ideally we should also make suggestions for misspelled pass names,
but that requires some extensions to PassBuilder.
Reviewed By: philip.pfaffe, chandlerc
Differential Revision: https://reviews.llvm.org/D53246
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@344685 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
All the PassBuilder::parse interfaces now return descriptive StringError
instead of a plain bool. It allows to make -passes/aa-pipeline parsing
errors context-specific and thus less confusing.
TODO: ideally we should also make suggestions for misspelled pass names,
but that requires some extensions to PassBuilder.
Reviewed By: philip.pfaffe, chandlerc
Differential Revision: https://reviews.llvm.org/D53246
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@344519 91177308-0d34-0410-b5e6-96231b3b80d8
This can be used to preserve profiling information across codebase
changes that have widespread impact on mangled names, but across which
most profiling data should still be usable. For example, when switching
from libstdc++ to libc++, or from the old libstdc++ ABI to the new ABI,
or even from a 32-bit to a 64-bit build.
The user can provide a remapping file specifying parts of mangled names
that should be treated as equivalent (eg, std::__1 should be treated as
equivalent to std::__cxx11), and profile data will be treated as
applying to a particular function if its name is equivalent to the name
of a function in the profile data under the provided equivalences. See
the documentation change for a description of how this is configured.
Remapping is supported for both sample-based profiling and instruction
profiling. We do not support remapping indirect branch target
information, but all other profile data should be remapped
appropriately.
Support is only added for the new pass manager. If someone wants to also
add support for this for the old pass manager, doing so should be
straightforward.
This is the LLVM side of Clang r344199.
Reviewers: davidxl, tejohnson, dlj, erik.pilkington
Subscribers: mehdi_amini, steven_wu, dexonsmith, llvm-commits
Differential Revision: https://reviews.llvm.org/D51249
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@344200 91177308-0d34-0410-b5e6-96231b3b80d8
Implementing -print-before-all/-print-after-all/-filter-print-func support
through PassInstrumentation callbacks.
- PrintIR routines implement printing callbacks.
- StandardInstrumentations class provides a central place to manage all
the "standard" in-tree pass instrumentations. Currently it registers
PrintIR callbacks.
Reviewers: chandlerc, paquette, philip.pfaffe
Differential Revision: https://reviews.llvm.org/D50923
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@342896 91177308-0d34-0410-b5e6-96231b3b80d8
Add a -debugify-export option to opt. This exports per-pass `debugify`
loss statistics to a file in CSV format.
For some interesting numbers on debug value loss during an -O2 build
of the sqlite3 amalgamation, see the review thread.
Differential Revision: https://reviews.llvm.org/D49003
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@337787 91177308-0d34-0410-b5e6-96231b3b80d8
This is a minor cleanup in preparation for a change to export DI
statistics from -check-debugify. To do that, it would be cleaner to have
a dedicated header for the debugify interface.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@337786 91177308-0d34-0410-b5e6-96231b3b80d8
Suppress the diagnostic for mis-sized dbg.values when a value operand is
narrower than the unsigned variable it describes. Assume that a debugger
would implicitly zero-extend these values.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@336452 91177308-0d34-0410-b5e6-96231b3b80d8
The checking logic should not treat artificial locations as being
somehow problematic. Producing these locations can be the desired
behavior of some passes.
See llvm.org/PR37961.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@335897 91177308-0d34-0410-b5e6-96231b3b80d8
It's not possible to get the fragment size of some dbg.values. Teach the
mis-sized dbg.value diagnostic to detect this scenario and bail out.
Tested with:
$ find test/Transforms -print -exec opt -debugify-each -instcombine {} \;
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@335695 91177308-0d34-0410-b5e6-96231b3b80d8
Report an error in -check-debugify when the size of a dbg.value operand
doesn't match up with the size of the variable it describes.
Eventually this check should be moved into the IR verifier. For the
moment, it's useful to include the check in -check-debugify as a means
of catching regressions and finding existing bugs.
Here are some instances of bugs the new check finds in the -O2 pipeline
(all in InstCombine):
1) A float is used where a double is expected:
ERROR: dbg.value operand has size 32, but its variable has size 64:
call void @llvm.dbg.value(metadata float %expf, metadata !12, metadata
!DIExpression()), !dbg !15
2) An i8 is used where an i32 is expected:
ERROR: dbg.value operand has size 8, but its variable has size 32:
call void @llvm.dbg.value(metadata i8 %t4, metadata !14, metadata
!DIExpression()), !dbg !24
3) A <4 x i32> is used where something twice as large is expected
(perhaps a <4 x i64>, I haven't double-checked):
ERROR: dbg.value operand has size 128, but its variable has size 256:
call void @llvm.dbg.value(metadata <4 x i32> %4, metadata !40, metadata
!DIExpression()), !dbg !95
Differential Revision: https://reviews.llvm.org/D48408
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@335682 91177308-0d34-0410-b5e6-96231b3b80d8
When checking the debug info in a module, don't treat a missing
dbg.value as an error. The dbg.value may simply have been DCE'd, in
which case the debugger has enough information to display the variable
as <optimized out>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@335647 91177308-0d34-0410-b5e6-96231b3b80d8
Before this patch, debugify would insert debug value intrinsics before the
terminating instruction in a block. This had the advantage of being simple,
but was a bit too simple/unrealistic.
This patch teaches debugify to insert debug values immediately after their
operand defs. This enables better testing of the compiler.
For example, with this patch, `opt -debugify-each` is able to identify a
vectorizer DI-invariance bug fixed in llvm.org/PR32761. In this bug, the
vectorizer produced different output with/without debug info present.
Reverting Davide's bugfix locally, I see:
$ ~/scripts/opt-check-dbg-invar.sh ./bin/opt \
.../SLPVectorizer/AArch64/spillcost-di.ll -slp-vectorizer
Comparing: -slp-vectorizer .../SLPVectorizer/AArch64/spillcost-di.ll
Baseline: /var/folders/j8/t4w0bp8j6x1g6fpghkcb4sjm0000gp/T/tmp.iYYeL1kf
With DI : /var/folders/j8/t4w0bp8j6x1g6fpghkcb4sjm0000gp/T/tmp.sQtQSeet
9,11c9,11
< %5 = getelementptr inbounds %0, %0* %2, i64 %0, i32 1
< %6 = bitcast i64* %4 to <2 x i64>*
< %7 = load <2 x i64>, <2 x i64>* %6, align 8, !tbaa !0
---
> %5 = load i64, i64* %4, align 8, !tbaa !0
> %6 = getelementptr inbounds %0, %0* %2, i64 %0, i32 1
> %7 = load i64, i64* %6, align 8, !tbaa !5
12a13
> store i64 %5, i64* %8, align 8, !tbaa !0
14,15c15
< %10 = bitcast i64* %8 to <2 x i64>*
< store <2 x i64> %7, <2 x i64>* %10, align 8, !tbaa !0
---
> store i64 %7, i64* %9, align 8, !tbaa !5
:: Found a test case ^
Running this over the *.ll files in tree, I found four additional examples
which compile differently with/without DI present. I plan on filing bugs for
these.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@334118 91177308-0d34-0410-b5e6-96231b3b80d8
This renames and generalizes -strip-module-flags to erase all named
metadata from a module. This makes it easier to diff IR.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@333977 91177308-0d34-0410-b5e6-96231b3b80d8
As is the case with musttail calls, the IR does not allow for
instructions inserted after a terminating deopt.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@333976 91177308-0d34-0410-b5e6-96231b3b80d8
The -check-debugify pass should preserve all analyses. Otherwise, it may
invalidate an optional analysis and inadvertently alter codegen.
The test case is reduced from deopt-bundle.ll. The result of `opt -O1`
on this file would differ when -debugify-each was toggled. That happened
because CheckDebugify failed to preserve GlobalsAA.
Thanks to Davide Italiano for his help chasing this down!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@333959 91177308-0d34-0410-b5e6-96231b3b80d8
Clement Courbet