There are two FPMs in an MSF file, the idea being that for
incremental updates you can write to the alternate one and then
atomically swap them on commit. LLVM defaulted to using FPM1
on the first commit, but this differs from Microsoft's behavior
which is to default to using FPM2 on the first commit. To
eliminate some byte-level file differences, this patch changes
LLVM's default to also be FPM2.
Additionally, LLVM was trying to be "smart" about marking FPM
pages allocated. In addition to marking every page belonging
to the alternate FPM as unallocated, LLVM also marked pages at
the end of the main FPM which were not needed as unallocated.
In order to match the behavior of Microsoft-generated PDBs, we
now always mark every FPM block as allocated, regardless of
whether it is in the main FPM or the alt FPM, and regardless of
whether or not it describes blocks which are actually in the file.
This has the side benefit of simplifying our code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@328812 91177308-0d34-0410-b5e6-96231b3b80d8
We have some code to try to determine how many pieces an MSF
Free Page Map is split into, and this code had an off by one
error which would cause the calculation to be incorrect when
there were exactly 4096*k + 1 blocks in an MSF file.
Original investigation and patch outline by Colden Cullen.
Differential Revision: https://reviews.llvm.org/D41742
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@321880 91177308-0d34-0410-b5e6-96231b3b80d8
The existing library assumed that a stream's length would never
change. This makes some things simpler, but it's not flexible
enough for what we need, especially for writable streams where
what you really want is for each call to write to actually append.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319070 91177308-0d34-0410-b5e6-96231b3b80d8
The PDB reserves certain blocks for the FPM that describe which
blocks in the file are allocated and which are free. We weren't
filling that out at all, and in some cases we were even stomping
it with incorrect data. This patch writes a correct FPM.
Differential Revision: https://reviews.llvm.org/D36235
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@309896 91177308-0d34-0410-b5e6-96231b3b80d8
Recently problems have been discovered in the way we write the FPM
(free page map). In order to fix this, we first need to establish
a baseline about what a correct FPM looks like using an MSVC
generated PDB, so that we can then make our own generated PDBs
match. And in order to do this, the dumper needs a mode where it
can dump an FPM so that we can write tests for it.
This patch adds a command to dump the FPM, as well as a test against
a known-good PDB.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@309894 91177308-0d34-0410-b5e6-96231b3b80d8
Previously MappedBlockStream owned its own BumpPtrAllocator that
it would allocate from when a read crossed a block boundary. This
way it could still return the user a contiguous buffer of the
requested size. However, It's not uncommon to open a stream, read
some stuff, close it, and then save the information for later.
After all, since the entire file is mapped into memory, the data
should always be available as long as the file is open.
Of course, the exception to this is when the data isn't *in* the
file, but rather in some buffer that we temporarily allocated to
present this contiguous view. And this buffer would get destroyed
as soon as the strema was closed.
The fix here is to force the user to specify the allocator, this
way it can provide an allocator that has whatever lifetime it
chooses.
Differential Revision: https://reviews.llvm.org/D33858
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@304623 91177308-0d34-0410-b5e6-96231b3b80d8
It was using the number of blocks of the entire PDB file as the number
of blocks of each stream that was created. This was only an issue in
the readLongestContiguousChunk function, which was never called prior.
This bug surfaced when I updated an algorithm to use this function and
the algorithm broke.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@303916 91177308-0d34-0410-b5e6-96231b3b80d8
This was reverted because it was breaking some builds, and
because of incorrect error code usage. Since the CL was
large and contained many different things, I'm resubmitting
it in pieces.
This portion is NFC, and consists of:
1) Renaming classes to follow a consistent naming convention.
2) Fixing the const-ness of the interface methods.
3) Adding detailed doxygen comments.
4) Fixing a few instances of passing `const BinaryStream& X`. These
are now passed as `BinaryStreamRef X`.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@296394 91177308-0d34-0410-b5e6-96231b3b80d8
r296215, "[PDB] General improvements to Stream library."
r296217, "Disable BinaryStreamTest.StreamReaderObject temporarily."
r296220, "Re-enable BinaryStreamTest.StreamReaderObject."
r296244, "[PDB] Disable some tests that are breaking bots."
r296249, "Add static_cast to silence -Wc++11-narrowing."
std::errc::no_buffer_space should be used for OS-oriented errors for socket transmission.
(Seek discussions around llvm/xray.)
I could substitute s/no_buffer_space/others/g, but I revert whole them ATM.
Could we define and use LLVM errors there?
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@296258 91177308-0d34-0410-b5e6-96231b3b80d8
This adds various new functionality and cleanup surrounding the
use of the Stream library. Major changes include:
* Renaming of all classes for more consistency / meaningfulness
* Addition of some new methods for reading multiple values at once.
* Full suite of unit tests for reader / writer functionality.
* Full set of doxygen comments for all classes.
* Streams now store their own endianness.
* Fixed some bugs in a few of the classes that were discovered
by the unit tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@296215 91177308-0d34-0410-b5e6-96231b3b80d8
This is part of a larger effort to get the Stream code moved
up to Support. I don't want to do it in one large patch, in
part because the changes are so big that it will treat everything
as file deletions and add, losing history in the process.
Aside from that though, it's just a good idea in general to
make small changes.
So this change only changes the names of the Stream related
source files, and applies necessary source fix ups.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@296211 91177308-0d34-0410-b5e6-96231b3b80d8
In an effort to generalize this so it can be used by more than
just PDB code, we shouldn't assume little endian.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@295525 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: The code we use to read PDBs assumed that streams we ask it to read exist, and would read memory outside a vector and crash if this wasn't the case. This would, for example, cause llvm-pdbdump to crash on PDBs generated by lld. This patch handles such cases more gracefully: the PDB reading code in LLVM now reports errors when asked to get a stream that is not present, and llvm-pdbdump will report missing streams and continue processing streams that are present.
Reviewers: ruiu, zturner
Subscribers: thakis, amccarth
Differential Revision: https://reviews.llvm.org/D27325
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@288722 91177308-0d34-0410-b5e6-96231b3b80d8
Using a pattern similar to that of YamlIO, this allows
us to have a single codepath for translating codeview
records to and from serialized byte streams. The
current patch only hooks this up to the reading of
CodeView type records. A subsequent patch will hook
it up for writing of CodeView type records, and then a
third patch will hook up the reading and writing of
CodeView symbols.
Differential Revision: https://reviews.llvm.org/D26040
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@285836 91177308-0d34-0410-b5e6-96231b3b80d8
This was all using ArrayRef<>s before which presents a problem
when you want to serialize to or deserialize from an actual
PDB stream. An ArrayRef<> is really just a special case of
what can be handled with StreamInterface though (e.g. by using
a ByteStream), so changing this to use StreamInterface allows
us to plug in a PDB stream and get all the record serialization
and deserialization for free on a MappedBlockStream.
Subsequent patches will try to remove TypeTableBuilder and
TypeRecordBuilder in favor of class that operate on
Streams as well, which should allow us to completely merge
the reading and writing codepaths for both types and symbols.
Differential Revision: https://reviews.llvm.org/D25831
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@284762 91177308-0d34-0410-b5e6-96231b3b80d8
Now that we have dropped MSVC 2013, all supported compilers support
noexcept and we can drop this portability macro.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@284672 91177308-0d34-0410-b5e6-96231b3b80d8
When we create a PDB file using PDBFileBuilder, the information
in the superblock, such as the size of the resulting file, is not
available.
Previously, PDBFileBuilder::initialize took a superblock assuming
that all the members of the struct are correct. That is useful when
you want to restore the exact information from a YAML file, but
that's probably the only use case in which that is useful.
When we are creating a PDB file on the fly, we have to backfill the
members.
This patch redefines PDBFileBuilder::initialize to take only a
block size. Now all the other members are left as default values,
so that they'll be updated when commit() is called.
Differential Revision: https://reviews.llvm.org/D25108
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@282944 91177308-0d34-0410-b5e6-96231b3b80d8
We have various command line options that print the type of a
stream, the size of a stream, etc but nowhere that it can all be
viewed together.
Since a previous patch introduced the ability to dump the bytes
of a stream, this seems like a good place to present a full view
of the stream's properties including its size, what kind of data
it represents, and the blocks it occupies. So I added the
ability to print that information to the -stream-data command
line option.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@281077 91177308-0d34-0410-b5e6-96231b3b80d8
MappedBlockSTream can work with any sequence of block data where
the ordering is specified by a list of block numbers. So rather
than manually stitch them together in the case of the FPM, reuse
this functionality so that we can treat the FPM as if it were
contiguous.
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D23066
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@277609 91177308-0d34-0410-b5e6-96231b3b80d8
Previously this change was submitted from a Windows machine, so
changes made to the case of filenames and directory names did
not survive the commit, and as a result the CMake source file
names and the on-disk file names did not match on case-sensitive
file systems.
I'm resubmitting this patch from a Linux system, which hopefully
allows the case changes to make it through unfettered.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@277213 91177308-0d34-0410-b5e6-96231b3b80d8
In a previous patch, it was suggested to use all caps instead of
rolling caps for initialisms, so this patch changes everything
to do this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@277190 91177308-0d34-0410-b5e6-96231b3b80d8
