that it works when the ObjC metadata sections end up in the
__DATA_CONST or __DATA_DIRTY segments.
rdar://26315238
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@294599 91177308-0d34-0410-b5e6-96231b3b80d8
Support printing the disassembly without the address on all formats
rather than making it MachO specific.
Patch by Jeff Muizelaar!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@294495 91177308-0d34-0410-b5e6-96231b3b80d8
Disassembly currently begins from addresses obtained from the objects
symbol table. For ELF, add the dynamic symbols to the list if no
static symbols are available so that we can more successfully
disassemble stripped binaries.
Differential Revision: https://reviews.llvm.org/D29632
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@294430 91177308-0d34-0410-b5e6-96231b3b80d8
which caused it to print more than the (__TEXT,__info_plist) if that
section did not end with a null.
rdar://27378808
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@294236 91177308-0d34-0410-b5e6-96231b3b80d8
which caused it to not disassemble the bytes a the start of the section if
the section had symbols and the first symbol was not at the start of the
section.
rdar://30143243
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@294212 91177308-0d34-0410-b5e6-96231b3b80d8
without symbols that makes calls through a symbol stub which were not
correctly being annotated with “## symbol stub for: _foo”.
Just adds the same parameters for getting the annotations from
DisAsm->getInstruction() and passing them to IP->printInst() from the
code above when boolean variable symbolTableWorked was true.
rdar://29791952
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@293662 91177308-0d34-0410-b5e6-96231b3b80d8
To better match the old darwin otool(1) behavior, when llvm-obdump(1) is used
with the -macho option and the input file is not an object file simply print
the file name and this message:
foo: is not an object file
and continue on to process other input files. Also in this case don’t exit
non-zero. This should help in some OSS projects' with autoconf scripts
that are expecting the old darwin otool(1) behavior.
rdar://26828015
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@293547 91177308-0d34-0410-b5e6-96231b3b80d8
in llvm-objdump for Mach-O files add the printing of the
x86_thread_state32_t in the same format as
otool-classic(1) on darwin.
To do this the 32-bit x86 general tread state
needed to be defined in include/llvm/Support/MachO.h .
rdar://30110111
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@292829 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Add a new load command LC_BUILD_VERSION. It is a generic version of
LC_*_VERSION_MIN load_command used on Apple platforms. Instead of having
a seperate load command for each platform, LC_BUILD_VERSION is recording
platform info as an enum. It also records SDK version, min_os, and tools
that used to build the binary.
rdar://problem/29781291
Reviewers: enderby
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D29044
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@292824 91177308-0d34-0410-b5e6-96231b3b80d8
It describes a region of arbitrary data included in a Mach-O file.
Its initial use is to record extra data in MH_CORE files.
rdar://30001545
rdar://30001731
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@292500 91177308-0d34-0410-b5e6-96231b3b80d8
Enable an ELFObjectFile to read the its arm build attributes to
produce a target triple with a specific ARM architecture.
llvm-objdump now uses this functionality to automatically produce
a more accurate target.
Differential Revision: https://reviews.llvm.org/D28769
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@292366 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Revert [ARM] Fix ubig32_t read in ARMAttributeParser
Now using support functions to read data instead of trying to
perform casts.
===========================================================
Revert [ARM] Enable objdump to construct triple for ARM
Now that The ARMAttributeParser has been moved into the library,
it has been modified so that it can parse the attributes without
printing them and stores them in a map. ELFObjectFile now queries
the attributes to fill out the architecture details of a provided
triple for 'arm' and 'thumb' targets. llvm-objdump uses this new
functionality.
Subscribers: llvm-commits, samparker, aemerson, mgorny
Differential Revision: https://reviews.llvm.org/D28683
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@291911 91177308-0d34-0410-b5e6-96231b3b80d8
Now that The ARMAttributeParser has been moved into the library,
it has been modified so that it can parse the attributes without
printing them and stores them in a map. ELFObjectFile now queries
the attributes to fill out the architecture details of a provided
triple for 'arm' and 'thumb' targets. llvm-objdump uses this new
functionality.
Differential Revision: https://reviews.llvm.org/D28281
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@291898 91177308-0d34-0410-b5e6-96231b3b80d8
Running a Debug build of objdump -objc-meta-data with a large Mach-O file is
currently unnecessarily slow.
With some local test input, this change reduces the run time from 75-85s down
to 15-20s.
The two changes are:
Assert on pointer equality not array equality
Replace vector<pair<address, symbol>> with DenseMap<address, symbol>
Additionally, use a std::unique_ptr rather than handling the memory manually.
Patch by Dave Lee!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@291398 91177308-0d34-0410-b5e6-96231b3b80d8
The Mach-O command line flag like "-arch armv7m" does not match the
arch name part of its llvm Triple which is "thumbv7m-apple-darwin”.
I think the best way to fix this is to have
llvm::object::MachOObjectFile::getArchTriple() optionally return the
name of the Mach-O arch flag that would be used with -arch that
matches the CPUType and CPUSubType. Then change
llvm::object::MachOUniversalBinary::ObjectForArch::getArchTypeName()
to use that and change it to getArchFlagName() as the type name is
really part of the Triple and the -arch flag name is a Mach-O thing
for a specific Triple with a specific Mcpu value.
rdar://29663637
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@290001 91177308-0d34-0410-b5e6-96231b3b80d8
since bpf instruction stream is multiple of 8 change llvm-objdump
to print decimal instruction number instead of hex address, so that
users don't have to do this math manually to match kernel verifier output
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@289569 91177308-0d34-0410-b5e6-96231b3b80d8
In some cases the leading headers of the file name, archive member and
architecture slice name in the output of lvm-objdump is not wanted so the
tool’s output can be directly used by scripts. This matches the -X option
of the Apple otool(1) program.
rdar://28491674
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@288199 91177308-0d34-0410-b5e6-96231b3b80d8
No real functional change with this commit.
The problem with report_fatal_error() is it does not include the tool name
and the file name the for which the error message was generated.
Uses of report_fatal_error() were change to report_error() or error()
to get a better error and to make the code smaller and cleaner.
Also changed things like error(errorToErrorCode(SOrErr.takeError())) to
use report_error() with a file name and the llvm::Error (as well as the
ArchitectureName if available) so the error message is printed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@287163 91177308-0d34-0410-b5e6-96231b3b80d8
This has two advantages:
1) We slowly move away from ErrorOr to the new handling interface,
in the hope of having an uniform error handling in LLVM, eventually.
2) We're starting to have *meaningful* error messages for invalid
object ELF files, rather than a generic "parse error". At some point
we should include also the offset to improve the quality of the
diagnostic.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@287081 91177308-0d34-0410-b5e6-96231b3b80d8
To get a good error message for all files that could contain Mach-O
files the code in llvm-objdump needs to use the archive member name
and name of the architecture of a slice of a universal file in those cases
where the error come from a Mach-O file in an archive or a universal file.
Most of this is fixed by moving the call to checkSymbolTable() into
ProcessMachO() and calling it when the operation needs the symbol
table. And then calling the form of report_error() that has the
ArchiveName and ArchitectureName arguments. One other place
needed to call this form of report_error() also with these arguments.
Also changed the code in MachODump.cpp to not use report_fatal_error()
and use report_error() instead to make the code smaller and cleaner. All
cases of this are for errors with the symbol table which should now never
be tripped since checkSymbolTable() should be called first to get a good
error message in these cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@287050 91177308-0d34-0410-b5e6-96231b3b80d8
The philosophy of the error checking in libObject for Mach-O files
is that the constructor will check the load commands so for their
tables the offsets and sizes are properly contained in the file.
But there is no checking of the entries of any of the tables.
For the contents of the tables themselves the methods accessing
the contents of the entries return errors as needed. In some
cases this however makes it difficult or cumbersome to produce
a good error message which would include the tool name, file name,
archive member, and name of the architecture of a slice of a universal file
the error occurred in.
So idea is that there will be a method to check a table which can
be called up front before using it allowing a good error message
to be produced before a table is used. And if only verification of
the Mach-O file and its tables are wanted a new possible method
checkAllTables() could be added to call all of the methods to
check all the tables at some time when such methods exist.
The checkSymbolTable() is the first of such methods to check
one of the Mach-O file tables. This method initially will used in
llvm-objdump’s DisassembleMachO() routine before it gets the
section and symbol information. As if there are problems with
the symbol table currently the error is first encountered by the
bool operator() in the SymbolSorter() struct which passed to
std::sort(). In this case there is no context as to the file name
the symbol which results a poor error message:
LLVM ERROR: truncated or malformed object (bad string index: 22 for symbol at index 1)
with the added call to the checkSymbolTable() method the
error message includes the tool name and file name:
llvm-objdump: 'macho-invalid-symbol-strx': truncated or malformed object (bad string table index: 22 past the end of string table, for symbol at index 1)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@286887 91177308-0d34-0410-b5e6-96231b3b80d8
insufficient to populate the expected struct. Prior to this we already
bailed out of the routine when this situation comes up, so none of this
code had any effect.
If someone wants to bring it back to handle these cases, fixing the
earlier conditions and adding the necessary test cases that actually
exercises it, they can always revert this and go from there.
Both of these were noticed by PVS-Studio due to the identical (dead)
condition.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@285989 91177308-0d34-0410-b5e6-96231b3b80d8
in llvm-objdump for Mach-O files add the printing of the
ARM_THREAD_STATE64 in the same format as
otool-classic(1) on darwin.
To do this the 64-bit ARM general tread state
needed to be defined in include/llvm/Support/MachO.h .
rdar://28985800
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@285967 91177308-0d34-0410-b5e6-96231b3b80d8
Add the necessary definitions for RISC-V ELF files, including relocs. Also
make necessary trivial change to ELFYaml, llvm-objdump, and llvm-readobj in
order to work with RISC-V ELFs.
Differential Revision: https://reviews.llvm.org/D23557
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@285708 91177308-0d34-0410-b5e6-96231b3b80d8
Most of the version of report_error were quoting the filename and
printing a colon between the file name and the error message, but this
one wasn't doing either of those. Fix the output to be more
consistent.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@285252 91177308-0d34-0410-b5e6-96231b3b80d8
the ARM_THREAD_STATE in the same format as
otool-classic(1) on darwin.
Also remove an extra space in printing the initprot to make
the output match otool-classic(1) on darwin.
rdar://28851457
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@284852 91177308-0d34-0410-b5e6-96231b3b80d8
The core of the change is supposed to be NFC, however it also fixes
what I believe was an undefined behavior when calling:
va_start(ValueArgs, Desc);
with Desc being a StringRef.
Differential Revision: https://reviews.llvm.org/D25342
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@283671 91177308-0d34-0410-b5e6-96231b3b80d8
This adds a copy of the demangler in libcxxabi.
The code also has no dependencies on anything else in LLVM. To enforce
that I added it as another library. That way a BUILD_SHARED_LIBS will
fail if anyone adds an use of StringRef for example.
The no llvm dependency combined with the fact that this has to build
on linux, OS X and Windows required a few changes to the code. In
particular:
No constexpr.
No alignas
On OS X at least this library has only one global symbol:
__ZN4llvm16itanium_demangleEPKcPcPmPi
My current plan is:
Commit something like this
Change lld to use it
Change lldb to use it as the fallback
Add a few #ifdefs so that exactly the same file can be used in
libcxxabi to export abi::__cxa_demangle.
Once the fast demangler in lldb can handle any names this
implementation can be replaced with it and we will have the one true
demangler.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@280732 91177308-0d34-0410-b5e6-96231b3b80d8
Kevin Enderby