This reapplies rL289013 (reverted in rL289014) with the fixes identified
in D21731. Should hopefully pass the buildbots this time.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@290809 91177308-0d34-0410-b5e6-96231b3b80d8
There are cases of AVX-512 instructions that have two possible encodings. This is the case with instructions that use vector registers with low indexes of 0 - 15 and do not use the zmm registers or the mask k registers.
The EVEX encoding prefix requires 4 bytes whereas the VEX prefix can take only up to 3 bytes. Consequently, using the VEX encoding for these instructions results in a code size reduction of ~2 bytes even though it is compiled with the AVX-512 features enabled.
Reviewers: Craig Topper, Zvi Rackoover, Elena Demikhovsky
Differential Revision: https://reviews.llvm.org/D27901
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@290663 91177308-0d34-0410-b5e6-96231b3b80d8
Currently, the error messages we emit for the .org directive when the
expression is not absolute or is out of range do not include the line
number of the directive, so it can be hard to track down the problem if
a file contains many .org directives.
This patch stores the source location in the MCOrgFragment, so that it
can be used for diagnostics emitted during layout.
Since layout is an iterative process, and the errors are detected during
each iteration, it would have been possible for errors to be reported
multiple times. To prevent this, I've made the assembler bail out after
each iteration if any errors have been reported. This will still allow
multiple unrelated errors to be reported in the common case where they
are all detected in the first round of layout.
Differential Revision: https://reviews.llvm.org/D27411
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@289643 91177308-0d34-0410-b5e6-96231b3b80d8
The relocations for `DIEEntry::EmitValue` were wrong for Win64
(emitting FK_Data_4 instead of FK_SecRel_4). This corrects that
oversight so that the DWARF data is correct in Win64 COFF files.
Fixes PR15393.
Patch by Jameson Nash <jameson@juliacomputing.com> based on a patch
by David Majnemer.
Differential Revision: https://reviews.llvm.org/D21731
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@289013 91177308-0d34-0410-b5e6-96231b3b80d8
Move the cast<MCSymbolELF> inside emitELFSize, so that:
- it's done in one place instead of at each call
- it's more consistent with similar functions like EmitCOFFSafeSEH
- ambiguity between cast<> and dyn_cast<> is avoided (which also
eliminates an unnecessary dyn_cast call)
This also makes it easier to experiment with using ".size" directives on
non-ELF targets.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@288437 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Previously we were trying to represent this with the "contains" list of
the .cv_inline_linetable directive, which was not enough information.
Now we directly represent the chain of inlined call sites, so we know
what location to emit when we encounter a .cv_loc directive of an inner
inlined call site while emitting the line table of an outer function or
inlined call site. Fixes PR29146.
Also fixes PR29147, where we would crash when .cv_loc directives crossed
sections. Now we write down the section of the first .cv_loc directive,
and emit an error if any other .cv_loc directive for that function is in
a different section.
Also fixes issues with discontiguous inlined source locations, like in
this example:
volatile int unlikely_cond = 0;
extern void __declspec(noreturn) abort();
__forceinline void f() {
if (!unlikely_cond) abort();
}
int main() {
unlikely_cond = 0;
f();
unlikely_cond = 0;
}
Previously our tables gave bad location information for the 'abort'
call, and the debugger wouldn't snow the inlined stack frame for 'f'.
It is important to emit good line tables for this code pattern, because
it comes up whenever an asan bug occurs in an inlined function. The
__asan_report* stubs are generally placed after the normal function
epilogue, leading to discontiguous regions of inlined code.
Reviewers: majnemer, amccarth
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D24014
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@280822 91177308-0d34-0410-b5e6-96231b3b80d8
MCContext already has many tasks, and separating CodeView out from it is
probably a good idea. The .cv_loc tracking was modelled on the DWARF
tracking which lived directly in MCContext.
Removes the inclusion of MCCodeView.h from MCContext.h, so now there are
only 10 build actions while I hack on CodeView support instead of 265.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@279847 91177308-0d34-0410-b5e6-96231b3b80d8
Assembler directives .dtprelword, .dtpreldword, .tprelword, and
.tpreldword generates relocations R_MIPS_TLS_DTPREL32, R_MIPS_TLS_DTPREL64,
R_MIPS_TLS_TPREL32, and R_MIPS_TLS_TPREL64 respectively.
The main motivation for this patch is to be able to write test cases
for checking correctness of the LLD linker's behaviour.
Differential Revision: https://reviews.llvm.org/D23669
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@279439 91177308-0d34-0410-b5e6-96231b3b80d8
Add parseToken and compatriot functions to stitch error checks in
straight linear code. As part of this fix some erronous handling of
directives where the EndOfStatement token either was not checked or
Lexed on termination.
Reviewers: rnk, majnemer
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D22312
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@275795 91177308-0d34-0410-b5e6-96231b3b80d8
Preserve assembly comments from input in output assembly and flags to
toggle property. This is on by default for inline assembly and off in
llvm-mc.
Parsed comments are emitted immediately before an EOL which generally
places them on the expected line.
Reviewers: rtrieu, dwmw2, rnk, majnemer
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D20020
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@275058 91177308-0d34-0410-b5e6-96231b3b80d8
The truncateToSize function already has assertion to check the
lower boundary for the number bytes, but it does not check the
upper boundary which could still lead to usage errors.
Differential Revision: http://reviews.llvm.org/D20755
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@271773 91177308-0d34-0410-b5e6-96231b3b80d8
Adds the method MCStreamer::EmitBinaryData, which is usually an alias
for EmitBytes. In the MCAsmStreamer case, it is overridden to emit hex
dump output like this:
.byte 0x0e, 0x00, 0x08, 0x10
.byte 0x03, 0x00, 0x00, 0x00
.byte 0x00, 0x00, 0x00, 0x00
.byte 0x00, 0x10, 0x00, 0x00
Also, when verbose asm comments are enabled, this patch prints the dump
output for each comment before its record, like this:
# ArgList (0x1000) {
# TypeLeafKind: LF_ARGLIST (0x1201)
# NumArgs: 0
# Arguments [
# ]
# }
.byte 0x06, 0x00, 0x01, 0x12
.byte 0x00, 0x00, 0x00, 0x00
This should make debugging easier and testing more convenient.
Reviewers: aaboud
Subscribers: majnemer, zturner, amccarth, aaboud, llvm-commits
Differential Revision: http://reviews.llvm.org/D20711
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@271313 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This adds a unique ID to the COFF section uniquing map, similar to the
one we have for ELF. The unique id is not currently exposed via the
assembler because we don't have a use case for it yet. Users generally
create .pdata with the .seh_* family of directives, and the assembler
internally needs to produce .pdata and .xdata sections corresponding to
the code section.
The association between .text sections and the assembler-created .xdata
and .pdata sections is maintained as an ID field of MCSectionCOFF. The
CFI-related sections are created with the given unique ID, so if more
code is added to the same text section, we can find and reuse the CFI
sections that were already created.
Reviewers: majnemer, rafael
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D19376
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@268331 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds support for the MachO .alt_entry assembly directive, and uses
it for global aliases with non-zero GEP offsets. The alt_entry flag indicates
that a symbol should be layed out immediately after the preceding symbol.
Conceptually it introduces an alternate entry point for a function or data
structure. E.g.:
safe_foo:
// check preconditions for foo
.alt_entry fast_foo
fast_foo:
// body of foo, can assume preconditions.
The .alt_entry flag is also implicitly set on assembly aliases of the form:
a = b + C
where C is a non-zero constant, since these have the same effect as an
alt_entry symbol: they introduce a label that cannot be moved relative to the
preceding one. Setting the alt_entry flag on aliases of this form fixes
http://llvm.org/PR25381.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@263521 91177308-0d34-0410-b5e6-96231b3b80d8
CodeView, like most other debug formats, represents the live range of a
variable so that debuggers might print them out.
They use a variety of records to represent how a particular variable
might be available (in a register, in a frame pointer, etc.) along with
a set of ranges where this debug information is relevant.
However, the format only allows us to use ranges which are limited to a
maximum of 0xF000 in size. This means that we need to split our debug
information into chunks of 0xF000.
Because the layout of code is not known until *very* late, we must use a
new fragment to record the information we need until we can know
*exactly* what the range is.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@259868 91177308-0d34-0410-b5e6-96231b3b80d8
CodeView requires us to accurately describe the extent of the inlined
code. We did this by grabbing the next debug location in source order
and using *that* to denote where we stopped inlining. However, this is
not sufficient or correct in instances where there is no next debug
location or the next debug location belongs to the start of another
function.
To get this correct, use the end symbol of the function to denote the
last possible place the inlining could have stopped at.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@259548 91177308-0d34-0410-b5e6-96231b3b80d8
This directive emits the binary annotations that describe line and code
deltas in inlined call sites. Single-stepping through inlined frames in
windbg now works.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@259535 91177308-0d34-0410-b5e6-96231b3b80d8
If a target can only emit 8-bits data, we would loop in EmitValueImpl
since it will try to split a 32-bits data in 1 chunk of 32-bits.
No test since all current targets can emit 32bits at a time.
Patch by Alexandru Guduleasa!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@259399 91177308-0d34-0410-b5e6-96231b3b80d8
This support is _very_ rudimentary, just enough to get some basic data
into the CodeView debug section.
Left to do is:
- Use the combined opcodes to save space.
- Do something about code offsets.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@259230 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r259117.
The LineInfo constructor is defined in the codeview library and we have
to link against it now. Doing that isn't trivial, so reverting for now.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@259126 91177308-0d34-0410-b5e6-96231b3b80d8
Adds a new family of .cv_* directives to LLVM's variant of GAS syntax:
- .cv_file: Similar to DWARF .file directives
- .cv_loc: Similar to the DWARF .loc directive, but starts with a
function id. CodeView line tables are emitted by function instead of
by compilation unit, so we needed an extra field to communicate this.
Rather than overloading the .loc direction further, we decided it was
better to have our own directive.
- .cv_stringtable: Emits the codeview string table at the current
position. Currently this just contains the filenames as
null-terminated strings.
- .cv_filechecksums: Emits the file checksum table for all files used
with .cv_file so far. There is currently no support for emitting
actual checksums, just filenames.
This moves the line table emission code down into the assembler. This
is in preparation for implementing the inlined call site line table
format. The inline line table format encoding algorithm requires knowing
the absolute code offsets, so it must run after the assembler has laid
out the code.
David Majnemer collaborated on this patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@259117 91177308-0d34-0410-b5e6-96231b3b80d8
For historic reasons, the behavior of .align differs between targets.
Fortunately, there are alternatives, .p2align and .balign, which make the
interpretation of the parameter explicit, and which behave consistently across
targets.
This patch teaches MC to use .p2align instead of .align, so that people reading
code for multiple architectures don't have to remember which way each platform
does its .align directive.
Differential Revision: http://reviews.llvm.org/D16549
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@258750 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Support for R_MIPS_NONE allows us to parse MIPS16's usage of .reloc.
R_MIPS_32 was included to be able to better test the directive.
Targets can add their relocations by overriding MCAsmBackend::getFixupKind().
Subscribers: grosbach, rafael, majnemer, dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D13659
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@252888 91177308-0d34-0410-b5e6-96231b3b80d8
These MachO file directives are used by linkers and other tools to provide
compatibility information, much like the existing .ios_version_min and
.macosx_version_min.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@251569 91177308-0d34-0410-b5e6-96231b3b80d8
When outgoing function arguments are passed using push instructions, and EH
is enabled, we may need to indicate to the stack unwinder that the stack
pointer was adjusted before the call.
This should fix the exception handling issues in PR24792.
Differential Revision: http://reviews.llvm.org/D13132
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@249522 91177308-0d34-0410-b5e6-96231b3b80d8
This extends the work done in r233995 so that now getFragment (in addition to
getSection) also works for variable symbols.
With that the existing logic to decide if a-b can be computed works even if
a or b are variables. Given that, the expression evaluation can avoid expanding
variables as aggressively and that in turn lets the relocation code see the
original variable.
In order for this to work with the asm streamer, there is now a dummy fragment
per section. It is used to assign a section to a symbol when no other fragment
exists.
This patch is a joint work by Maxim Ostapenko andy myself.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@249303 91177308-0d34-0410-b5e6-96231b3b80d8
After r244870 flush() will only compare two null pointers and return,
doing nothing but wasting run time. The call is not required any more
as the stream and its SmallString are always in sync.
Thanks to David Blaikie for reviewing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@244928 91177308-0d34-0410-b5e6-96231b3b80d8
