It is necessary to generate fixups in .debug_frame or .eh_frame as
relaxation is enabled due to the address delta may be changed after
relaxation.
There is an opcode with 6-bits data in debug frame encoding. So, we
also need 6-bits fixup types.
Differential Revision: https://reviews.llvm.org/D58335
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@366524 91177308-0d34-0410-b5e6-96231b3b80d8
It is necessary to generate fixups in .debug_frame or .eh_frame as
relaxation is enabled due to the address delta may be changed after
relaxation.
There is an opcode with 6-bits data in debug frame encoding. So, we
also need 6-bits fixup types.
Differential Revision: https://reviews.llvm.org/D58335
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@366442 91177308-0d34-0410-b5e6-96231b3b80d8
Another attempt to land the changes in debug line header to prevent duplicate
files in Dwarf 5. I rolled back my previous commit because of a mistake in
generating the object file in a test. Meanwhile, I addressed some offline
comments and changed the implementation; the largest difference is that
MCDwarfLineTableHeader does not keep DwarfVersion but gets it as a parameter. I
also merged the patch to fix two lld tests that will strt to fail into this
patch.
Original Commit:
https://reviews.llvm.org/D59515
Original Message:
Motivation: In previous dwarf versions, file name indexes started from 1, and
the primary source file was not explicit. Dwarf 5 standard (6.2.4) prescribes
the primary source file to be explicitly given an entry with an index number 0.
The current implementation honors the specification by just duplicating the
main source file, once with index number 0, and later maybe with another
index number. While this is compliant with the letter of the standard, the
duplication causes problems for consumers of this information such as lldb.
(Some files are duplicated, where only some of them have a line table although
all refer to the same file)
With this change, dwarf 5 debug line section files always start from 0, and
the zeroth entry is not duplicated whenever possible. This requires different
handling of dwarf 4 and dwarf 5 during generation (e.g. when a function returns
an index zero for a file name, it signals an error in dwarf 4, but not in dwarf
5) However, I think the minor complication is worth it, because it enables all
consumers (lldb, gdb, dwarfdump, objdump, and so on) to treat all files in the
file name list homogenously.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@358732 91177308-0d34-0410-b5e6-96231b3b80d8
Note, `DirIndex++` below is incorrect for DWARF 5, but it can be fixed
later after the file index is fixed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@358251 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit rL357020.
The commit broke the test llvm/test/tools/llvm-objdump/embedded-source.test
on some builds including clang-ppc64be-linux-multistage,
clang-s390x-linux, clang-with-lto-ubuntu, clang-x64-windows-msvc,
llvm-clang-lld-x86_64-scei-ps4-windows10pro-fast (and others).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@357026 91177308-0d34-0410-b5e6-96231b3b80d8
Reapply rL356941 after regenerating the object file in the failing test
llvm/test/tools/llvm-objdump/embedded-source.test from source.
Original commit message:
[llvm] Prevent duplicate files in debug line header in dwarf 5.
Motivation: In previous dwarf versions, file name indexes started from 1, and
the primary source file was not explicit. Dwarf 5 standard (6.2.4) prescribes
the primary source file to be explicitly given an entry with an index number 0.
The current implementation honors the specification by just duplicating the
main source file, once with index number 0, and later maybe with another
index number. While this is compliant with the letter of the standard, the
duplication causes problems for consumers of this information such as lldb.
(Some files are duplicated, where only some of them have a line table although
all refer to the same file)
With this change, dwarf 5 debug line section files always start from 0, and
the zeroth entry is not duplicated whenever possible. This requires different
handling of dwarf 4 and dwarf 5 during generation (e.g. when a function returns
an index zero for a file name, it signals an error in dwarf 4, but not in dwarf 5)
However, I think the minor complication is worth it, because it enables all
consumers (lldb, gdb, dwarfdump, objdump, and so on) to treat all files in the
file name list homogenously.
Tags: #llvm, #debug-info
Differential Revision: https://reviews.llvm.org/D59515
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@357018 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit 312ab05887d0e2caa29aaf843cefe39379a98d36.
My commit broke the build; I will revert and find out what happened.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@356951 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Motivation: In previous dwarf versions, file name indexes started from 1, and
the primary source file was not explicit. Dwarf 5 standard (6.2.4) prescribes
the primary source file to be explicitly given an entry with an index number 0.
The current implementation honors the specification by just duplicating the
main source file, once with index number 0, and later maybe with another
index number. While this is compliant with the letter of the standard, the
duplication causes problems for consumers of this information such as lldb.
(Some files are duplicated, where only some of them have a line table although
all refer to the same file)
With this change, dwarf 5 debug line section files always start from 0, and
the zeroth entry is not duplicated whenever possible. This requires different
handling of dwarf 4 and dwarf 5 during generation (e.g. when a function returns
an index zero for a file name, it signals an error in dwarf 4, but not in dwarf 5)
However, I think the minor complication is worth it, because it enables all
consumers (lldb, gdb, dwarfdump, objdump, and so on) to treat all files in the
file name list homogenously.
Reviewers: dblaikie, probinson, aprantl, espindola
Reviewed By: probinson
Subscribers: emaste, jvesely, nhaehnle, aprantl, javed.absar, arichardson, hiraditya, MaskRay, rupprecht, jdoerfert, llvm-commits
Tags: #llvm, #debug-info
Differential Revision: https://reviews.llvm.org/D59515
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@356941 91177308-0d34-0410-b5e6-96231b3b80d8
This isn't necessary according to the DWARF standard, but it matches the
.eh_frame sections emitted by other tools in practice, and the Android
libunwindstack rejects .eh_frame sections where an FDE refers to a CIE
other than the closest previous CIE. So match the other tools and also
sort accordingly.
I consider this a bug in libunwindstack, but it's easy enough to emit
a compatible .eh_frame section for compatibility with installed
operating systems.
Differential Revision: https://reviews.llvm.org/D58266
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@356216 91177308-0d34-0410-b5e6-96231b3b80d8
This was sometimes causing clang or llvm-mc to crash, and in other
cases could emit a bogus DWARF line-table header. I did an interim
patch in r352541; this patch should be a cleaner and more complete
fix, and retains the test.
Addresses PR40538.
Differential Revision: https://reviews.llvm.org/D58750
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@355226 91177308-0d34-0410-b5e6-96231b3b80d8
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@351636 91177308-0d34-0410-b5e6-96231b3b80d8
- When signing return addresses with -msign-return-address=<scope>{+<key>},
either the A key instructions or the B key instructions can be used. To
correctly authenticate the return address, the unwinder/debugger must know
which key was used to sign the return address.
- When and exception is thrown or a break point reached, it may be necessary to
unwind the stack. To accomplish this, the unwinder/debugger must be able to
first authenticate an the return address if it has been signed.
- To enable this, the augmentation string of CIEs has been extended to allow
inclusion of a 'B' character. Functions that are signed using the B key
variant of the instructions should have and FDE whose associated CIE has a 'B'
in the augmentation string.
- One must also be able to preserve these semantics when first stepping from a
high level language into assembly and then, as a second step, into an object
file. To achieve this, I have introduced a new assembly directive
'.cfi_b_key_frame ', that tells the assembler the current frame uses return
address signing with the B key.
- This ensures that the FDE is associated with a CIE that has 'B' in the
augmentation string.
Differential Revision: https://reviews.llvm.org/D51798
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@349895 91177308-0d34-0410-b5e6-96231b3b80d8
- Reapply changes intially introduced in r343089
- The archtecture info is no longer loaded whenever a DWARFContext is created
- The runtimes libraries (santiziers) make use of the dwarf context classes but
do not intialise the target info
- The architecture of the object can be obtained without loading the target info
- Adding a method to the dwarf context to get this information and multiplex the
string printing later on
Differential Revision: https://reviews.llvm.org/D55774
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@349472 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
DW_CFA_restore can only encode register numbers up to 64 (6 bits unsigned
int). For regsiter numbers > 64 we have to use DW_CFA_restore_extended
instead which uses a ULEB128 value.
I discovered this problem in the out-of-tree CHERI target since we use
DWARF register number 89 for our return capability register.
Reviewers: probinson, dblaikie, aprantl, espindola
Reviewed By: dblaikie
Subscribers: JohnReagan, emaste, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D54420
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@346751 91177308-0d34-0410-b5e6-96231b3b80d8
- Add fix so that all code paths that create DWARFContext
with an ObjectFile initialise the target architecture in the context
- Add an assert that the Arch is known in the Dwarf CallFrameString method
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@343317 91177308-0d34-0410-b5e6-96231b3b80d8
This caused the DebugInfo/Sparc/gnu-window-save.ll test to fail.
> Functions that have signed return addresses need additional dwarf support:
> - After signing the LR, and before authenticating it, the LR register is in a
> state the is unusable by a debugger or unwinder
> - To account for this a new directive, .cfi_negate_ra_state, is added
> - This directive says the signed state of the LR register has now changed,
> i.e. unsigned -> signed or signed -> unsigned
> - This directive has the same CFA code as the SPARC directive GNU_window_save
> (0x2d), adding a macro to account for multiply defined codes
> - This patch matches the gcc implementation of this support:
> https://patchwork.ozlabs.org/patch/800271/
>
> Differential Revision: https://reviews.llvm.org/D50136
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@343103 91177308-0d34-0410-b5e6-96231b3b80d8
Functions that have signed return addresses need additional dwarf support:
- After signing the LR, and before authenticating it, the LR register is in a
state the is unusable by a debugger or unwinder
- To account for this a new directive, .cfi_negate_ra_state, is added
- This directive says the signed state of the LR register has now changed,
i.e. unsigned -> signed or signed -> unsigned
- This directive has the same CFA code as the SPARC directive GNU_window_save
(0x2d), adding a macro to account for multiply defined codes
- This patch matches the gcc implementation of this support:
https://patchwork.ozlabs.org/patch/800271/
Differential Revision: https://reviews.llvm.org/D50136
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@343089 91177308-0d34-0410-b5e6-96231b3b80d8
In r319995, we fixed the line table format to version 2 on Darwin
because dsymutil didn't yet understand the new format which caused test
failures for the LLDB bots. This has been resolved in the meantime so
there's no reason to keep this limitation.
rdar://problem/35968332
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@342136 91177308-0d34-0410-b5e6-96231b3b80d8
It is necessary to generate fixups in .debug_line as relaxation is
enabled due to the address delta may be changed after relaxation.
DWARF will record the mappings of lines and addresses in
.debug_line section. It will encode the information using special
opcodes, standard opcodes and extended opcodes in Line Number
Program. I use DW_LNS_fixed_advance_pc to encode fixed length
address delta and DW_LNE_set_address to encode absolute address
to make it possible to generate fixups in .debug_line section.
Differential Revision: https://reviews.llvm.org/D46850
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@338477 91177308-0d34-0410-b5e6-96231b3b80d8
AT_NAME was being emitted before the directory paths were remapped. This
ensures that all paths are remapped before anything is emitted.
An additional test case has been added.
Note that this only works if the replacement string is an absolute path.
If not, then AT_decl_file believes the new path is a relative path, and
joins that path with the compilation directory. I do not know of a good
way to resolve this.
Patch by: Siddhartha Bagaria (starsid)
Differential revision: https://reviews.llvm.org/D49169
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@336793 91177308-0d34-0410-b5e6-96231b3b80d8
In some cases, for example when compiling a preprocessed file, the
front-end is not able to provide an MD5 checksum for all files. When
that happens, omit the MD5 checksums from the final DWARF, because
DWARF doesn't have a way to indicate that some but not all files have
a checksum.
When assembling a .s file, and some but not all .file directives
provide an MD5 checksum, issue a warning and don't emit MD5 into the
DWARF.
Fixes PR37623.
Differential Revision: https://reviews.llvm.org/D48135
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@334710 91177308-0d34-0410-b5e6-96231b3b80d8
Don't provide the assembler source as the "root file" unless the user
asked to have debug info for the assembler source (with -g).
If the source doesn't provide an explicit ".file 0" then (a) use the
compilation directory as directory #0, and (b) use the file #1 info
for file #0 also.
Differential Revision: https://reviews.llvm.org/D48055
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@334512 91177308-0d34-0410-b5e6-96231b3b80d8
DWARF v5 specifies that the root file (also given in the DW_AT_name
attribute of the compilation unit DIE) should be emitted explicitly to
the line table's list of files. This makes the line table more
independent of the .debug_info section.
We emit the new syntax only for DWARF v5 and later.
Fixes the bug found by asan. Also XFAIL the new test for Darwin, which
is stuck on DWARF v2, and fix up other tests so they stop failing on
Windows. Last but not least, don't break "clang -g" of an assembler
file that has .file directives in it.
Differential Revision: https://reviews.llvm.org/D44054
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@328805 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r328676.
Commit r328676 broke the -no-integrated-as flag necessary to build Linux kernel with Clang:
$ cat t.c
void foo() {}
$ clang -no-integrated-as -c t.c -g
/tmp/t-dcdec5.s: Assembler messages:
/tmp/t-dcdec5.s:8: Error: file number less than one
clang-7.0: error: assembler command failed with exit code 1 (use -v to see invocation)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@328699 91177308-0d34-0410-b5e6-96231b3b80d8
DWARF v5 specifies that the root file (also given in the DW_AT_name
attribute of the compilation unit DIE) should be emitted explicitly to
the line table's list of files. This makes the line table more
independent of the .debug_info section.
Fixes the bug found by asan. Also XFAIL the new test for Darwin, which
is stuck on DWARF v2, and fix up other tests so they stop failing on
Windows. Last but not least, don't break "clang -g" of an assembler
file that has .file directives in it.
Differential Revision: https://reviews.llvm.org/D44054
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@328676 91177308-0d34-0410-b5e6-96231b3b80d8
If a given split type unit does not have source locations, don't have
it refer to the split line table.
If no split type unit refers to the split line table, don't emit the
line table at all.
This will save a little space on rare occasions, but also refactors
things a bit to improve which class is responsible for what.
Responding to review comments on r326395.
Differential Revision: https://reviews.llvm.org/D44220
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@328670 91177308-0d34-0410-b5e6-96231b3b80d8
Fixes the bug found by asan. Also XFAIL the new test for Darwin,
which is stuck on DWARF v2, and fix up other tests so they stop
failing on Windows.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@326839 91177308-0d34-0410-b5e6-96231b3b80d8
DWARF v5 specifies that the root file (also given in the DW_AT_name
attribute of the compilation unit DIE) should be emitted explicitly to
the line table's list of files. This makes the line table more
independent of the .debug_info section.
Differential Revision: https://reviews.llvm.org/D44054
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@326758 91177308-0d34-0410-b5e6-96231b3b80d8
In DWARF v5 the Line Number Program Header is extensible, allowing values with
new content types. In this extension a content type is added,
DW_LNCT_LLVM_source, which contains the embedded source code of the file.
Add new optional attribute for !DIFile IR metadata called source which contains
source text. Use this to output the source to the DWARF line table of code
objects. Analogously extend METADATA_FILE in Bitcode and .file directive in ASM
to support optional source.
Teach llvm-dwarfdump and llvm-objdump about the new values. Update the output
format of llvm-dwarfdump to make room for the new attribute on file_names
entries, and support embedded sources for the -source option in llvm-objdump.
Differential Revision: https://reviews.llvm.org/D42765
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@325970 91177308-0d34-0410-b5e6-96231b3b80d8
Benjamin Kramer