The Windows ARM target expects the compiler to emit a division-by-zero check.
The check would use the form of:
cmp r?, #0
cbz .Ltrap
b .Lbody
.Lbody:
...
.Ltrap:
udf #249 @ __brkdiv0
This works great most of the time. However, if the body of the function is
greater than 127 bytes, the branch target limitation of cbz becomes an issue.
This occurs in the unoptimized code generation cases sometimes (like in
compiler-rt).
Since this is a matter of correctness, possibly pay a small penalty instead. We
now form this slightly differently:
cbnz .Lbody
udf #249 @ __brkdiv0
.Lbody:
...
The positive case is through the branch instead of being the next instruction.
However, because of the basic block layout, the negated branch is going to be
a short distance always (2 bytes away, after the inserted __brkdiv0).
The new t__brkdiv0 instruction is required to explicitly mark the instruction as
a terminator as the generic UDF instruction is not a terminator.
Addresses PR30532!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@285312 91177308-0d34-0410-b5e6-96231b3b80d8
UMAAL is a DSP instruction and it is not available on thumbv7m
(Cortex-M3) and thumbv6m (Cortex-M0+1) targets. Also fix wrong
CHECK prefix in longMAC.ll test.
Patch by Vadzim Dambrouski.
Differential Revision: https://reviews.llvm.org/D25890
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@285278 91177308-0d34-0410-b5e6-96231b3b80d8
It would be a very nice invariant to rely on, but unfortunately it doesn't
necessarily hold (and the causes of mis-sorted reglists appear to be quite
varied) so to be robust the frame lowering code can't assume that the first
register in the list is also the first one that actually gets pushed.
Should fix an issue where we were turning something like:
push {r8, r4, r7, lr}
sub sp, #24
into nonsense like:
push {r2, r3, r4, r5, r6, r7, r8, r4, r7, lr}
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@285232 91177308-0d34-0410-b5e6-96231b3b80d8
Passing a MachineFunction as argument is more natural and avoids an
unnecessary round-trip through the logic determining the correct
Subtarget because MachineFunction already has a reference anyway.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@285039 91177308-0d34-0410-b5e6-96231b3b80d8
tPCRelJT may not be the first instruction in a block. Check that instead of dereferencing a broken iterator.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@284917 91177308-0d34-0410-b5e6-96231b3b80d8
All of these existed because MSVC 2013 was unable to synthesize default
move ctors. We recently dropped support for it so all that error-prone
boilerplate can go.
No functionality change intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@284721 91177308-0d34-0410-b5e6-96231b3b80d8
The TBB and TBH instructions in Thumb-2 allow jump tables to be compressed into sequences of bytes or shorts respectively. These instructions do not exist in Thumb-1, however it is possible to synthesize them out of a sequence of other instructions.
It turns out this sequence is so short that it's almost never a lose for performance and is ALWAYS a significant win for code size.
TBB example:
Before: lsls r0, r0, #2 After: add r0, pc
adr r1, .LJTI0_0 ldrb r0, [r0, #6]
ldr r0, [r0, r1] lsls r0, r0, #1
mov pc, r0 add pc, r0
=> No change in prologue code size or dynamic instruction count. Jump table shrunk by a factor of 4.
The only case that can increase dynamic instruction count is the TBH case:
Before: lsls r0, r4, #2 After: lsls r4, r4, #1
adr r1, .LJTI0_0 add r4, pc
ldr r0, [r0, r1] ldrh r4, [r4, #6]
mov pc, r0 lsls r4, r4, #1
add pc, r4
=> 1 more instruction in prologue. Jump table shrunk by a factor of 2.
So there is an argument that this should be disabled when optimizing for performance (and a TBH needs to be generated). I'm not so sure about that in practice, because on small cores with Thumb-1 performance is often tied to code size. But I'm willing to turn it off when optimizing for performance if people want (also note that TBHs are fairly rare in practice!)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@284580 91177308-0d34-0410-b5e6-96231b3b80d8
This renames the function for checking FP function attribute values and also
adds more build attribute tests (which are in separate files because build
attributes are set per file).
Differential Revision: https://reviews.llvm.org/D25625
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@284571 91177308-0d34-0410-b5e6-96231b3b80d8
This patch assigns cost of the scaling used in addressing for Cortex-R52.
On Cortex-R52 a negated register offset takes longer than a non-negated
register offset, in a register-offset addressing mode.
Differential Revision: http://reviews.llvm.org/D25670
Reviewer: jmolloy
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@284460 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds simplified support for tail calls on ARM with XRay instrumentation.
Known issue: compiled with generic flags: `-O3 -g -fxray-instrument -Wall
-std=c++14 -ffunction-sections -fdata-sections` (this list doesn't include my
specific flags like --target=armv7-linux-gnueabihf etc.), the following program
#include <cstdio>
#include <cassert>
#include <xray/xray_interface.h>
[[clang::xray_always_instrument]] void __attribute__ ((noinline)) fC() {
std::printf("In fC()\n");
}
[[clang::xray_always_instrument]] void __attribute__ ((noinline)) fB() {
std::printf("In fB()\n");
fC();
}
[[clang::xray_always_instrument]] void __attribute__ ((noinline)) fA() {
std::printf("In fA()\n");
fB();
}
// Avoid infinite recursion in case the logging function is instrumented (so calls logging
// function again).
[[clang::xray_never_instrument]] void simplyPrint(int32_t functionId, XRayEntryType xret)
{
printf("XRay: functionId=%d type=%d.\n", int(functionId), int(xret));
}
int main(int argc, char* argv[]) {
__xray_set_handler(simplyPrint);
printf("Patching...\n");
__xray_patch();
fA();
printf("Unpatching...\n");
__xray_unpatch();
fA();
return 0;
}
gives the following output:
Patching...
XRay: functionId=3 type=0.
In fA()
XRay: functionId=3 type=1.
XRay: functionId=2 type=0.
In fB()
XRay: functionId=2 type=1.
XRay: functionId=1 type=0.
XRay: functionId=1 type=1.
In fC()
Unpatching...
In fA()
In fB()
In fC()
So for function fC() the exit sled seems to be called too much before function
exit: before printing In fC().
Debugging shows that the above happens because printf from fC is also called as
a tail call. So first the exit sled of fC is executed, and only then printf is
jumped into. So it seems we can't do anything about this with the current
approach (i.e. within the simplification described in
https://reviews.llvm.org/D23988 ).
Differential Revision: https://reviews.llvm.org/D25030
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@284456 91177308-0d34-0410-b5e6-96231b3b80d8
This patch assigns cost of the scaling used in addressing.
On many ARM cores, a negated register offset takes longer than a
non-negated register offset, in a register-offset addressing mode.
For instance:
LDR R0, [R1, R2 LSL #2]
LDR R0, [R1, -R2 LSL #2]
Above, (1) takes less cycles than (2).
By assigning appropriate scaling factor cost, we enable the LLVM
to make the right trade-offs in the optimization and code-selection phase.
Differential Revision: http://reviews.llvm.org/D24857
Reviewers: jmolloy, rengolin
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@284127 91177308-0d34-0410-b5e6-96231b3b80d8
Reverts r283938 to reinstate r283867 with a fix.
The original change had an ArrayRef referring to a destroyed temporary
initializer list. Use plain C arrays instead.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@283942 91177308-0d34-0410-b5e6-96231b3b80d8
The high registers are not allocatable in Thumb1 functions, but they
could still be used by inline assembly, so we need to save and restore
the callee-saved high registers (r8-r11) in the prologue and epilogue.
This is complicated by the fact that the Thumb1 push and pop
instructions cannot access these registers. Therefore, we have to move
them down into low registers before pushing, and move them back after
popping into low registers.
In most functions, we will have low registers that are also being
pushed/popped, which we can use as the temporary registers for
saving/restoring the high registers. However, this is not guaranteed, so
we may need to push some extra low registers to ensure that the high
registers can be saved/restored. For correctness, it would be sufficient
to use just one low register, but if we have enough low registers
available then we only need one push/pop instruction, rather than one
per high register.
We can also use the argument/return registers when they are not live,
and the link register when saving (but not restoring), reducing the
number of extra registers we need to push.
There are still a few extreme edge cases where we need two push/pop
instructions, because not enough low registers can be made live in the
prologue or epilogue.
In addition to the regression tests included here, I've also tested this
using a script to generate functions which clobber different
combinations of registers, have different numbers of argument and return
registers (including variadic arguments), allocate different fixed sized
objects on the stack, and do or don't use variable sized allocas and the
__builtin_return_address intrinsic (all of which affect the available
registers in the prologue and epilogue). I ran these functions in a test
harness which verifies that all of the callee-saved registers are
correctly preserved.
Differential Revision: https://reviews.llvm.org/D24228
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@283867 91177308-0d34-0410-b5e6-96231b3b80d8
Currently, the Int_eh_sjlj_dispatchsetup intrinsic is marked as
clobbering all registers, including floating-point registers that may
not be present on the target. This is technically true, as we could get
linked against code that does use the FP registers, but that will not
actually work, as the soft-float code cannot save and restore the FP
registers. SjLj exception handling can only work correctly if either all
or none of the code is built for a target with FP registers. Therefore,
we can assume that, when Int_eh_sjlj_dispatchsetup is compiled for a
soft-float target, it is only going to be linked against other
soft-float code, and so only clobbers the general-purpose registers.
This allows us to check that no non-savable registers are clobbered when
generating the prologue/epilogue.
Differential Revision: https://reviews.llvm.org/D25180
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@283866 91177308-0d34-0410-b5e6-96231b3b80d8
The instructions VLDM/VSTM can only access word-aligned memory
locations and produce alignment fault if the condition is not met.
The compiler currently generates VLDM/VSTM for v2f64 load/store
regardless the alignment of the memory access. Instead, if a v2f64
load/store is not word-aligned, the compiler should generate
VLD1/VST1. For each non double-word-aligned VLD1/VST1, a VREV
instruction should be generated when targeting Big Endian.
Differential Revision: https://reviews.llvm.org/D25281
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@283763 91177308-0d34-0410-b5e6-96231b3b80d8
The core of the change is supposed to be NFC, however it also fixes
what I believe was an undefined behavior when calling:
va_start(ValueArgs, Desc);
with Desc being a StringRef.
Differential Revision: https://reviews.llvm.org/D25342
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@283671 91177308-0d34-0410-b5e6-96231b3b80d8
Reapplying r283383 after revert in r283442. The additional fix
is a getting rid of a stray space in a function name, in the
refactoring part of the commit.
This avoids falling back to calling out to the GCC rem functions
(__moddi3, __umoddi3) when targeting Windows.
The __rt_div functions have flipped the two arguments compared
to the __aeabi_divmod functions. To match MSVC, we emit a
check for division by zero before actually calling the library
function (even if the library function itself also might do
the same check).
Not all calls to __rt_div functions for division are currently
merged with calls to the same function with the same parameters
for the remainder. This is more wasteful than a div + mls as before,
but avoids calls to __moddi3.
Differential Revision: https://reviews.llvm.org/D25332
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@283550 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds Cortex-R52, the new ARM real-time processor, to LLVM.
Cortex-R52 implements the ARMv8-R architecture.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@283542 91177308-0d34-0410-b5e6-96231b3b80d8
With the ROPI and RWPI relocation models we can't always have pointers
to global data or functions in constant data, so don't try to convert switches
into lookup tables if any value in the lookup table would require a relocation.
We can still safely emit lookup tables of other values, such as simple
constants.
Differential Revision: https://reviews.llvm.org/D24462
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@283530 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r283383 because it broke some of the bots:
undefined reference to ` __aeabi_uldivmod'
It affected (at least) clang-cmake-armv7-a15-selfhost,
clang-cmake-armv7-a15-selfhost and clang-native-arm-lnt.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@283442 91177308-0d34-0410-b5e6-96231b3b80d8
Global variables are GlobalValues, so they have explicit alignment. Querying
DataLayout for the alignment was incorrect.
Testcase added.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@283423 91177308-0d34-0410-b5e6-96231b3b80d8
This avoids falling back to calling out to the GCC rem functions
(__moddi3, __umoddi3) when targeting Windows.
The __rt_div functions have flipped the two arguments compared
to the __aeabi_divmod functions. To match MSVC, we emit a
check for division by zero before actually calling the library
function (even if the library function itself also might do
the same check).
Not all calls to __rt_div functions for division are currently
merged with calls to the same function with the same parameters
for the remainder. This is more wasteful than a div + mls as before,
but avoids calls to __moddi3.
Differential Revision: https://reviews.llvm.org/D24076
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@283383 91177308-0d34-0410-b5e6-96231b3b80d8
This is not a valid encoding - these instructions cannot do PC-relative addressing.
The underlying problem here is of whitelist in ARMISelDAGToDAG that unwraps ARMISD::Wrappers during addressing-mode selection. This didn't realise TargetConstantPool was actually possible, so didn't handle it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@283323 91177308-0d34-0410-b5e6-96231b3b80d8
library call to __aeabi_uidivmod. This is an improved implementation of
r280808, see also D24133, that got reverted because isel was stuck in a loop.
That was caused by the optimisation incorrectly triggering on i64 ints, which
shouldn't happen because there is no 64bit hwdiv support; that put isel's type
legalization and this optimisation in a loop. A native ARM compiler and testing
now shows that this is fixed.
Patch mostly by Pablo Barrio.
Differential Revision: https://reviews.llvm.org/D25077
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@283098 91177308-0d34-0410-b5e6-96231b3b80d8
If a constant is unamed_addr and is only used within one function, we can save
on the code size and runtime cost of an indirection by changing the global's storage
to inside the constant pool. For example, instead of:
ldr r0, .CPI0
bl printf
bx lr
.CPI0: &format_string
format_string: .asciz "hello, world!\n"
We can emit:
adr r0, .CPI0
bl printf
bx lr
.CPI0: .asciz "hello, world!\n"
This can cause significant code size savings when many small strings are used in one
function (4 bytes per string).
This recommit contains fixes for a nasty bug related to fast-isel fallback - because
fast-isel doesn't know about this optimization, if it runs and emits references to
a string that we inline (because fast-isel fell back to SDAG) we will end up
with an inlined string and also an out-of-line string, and we won't emit the
out-of-line string, causing backend failures.
It also contains fixes for emitting .text relocations which made the sanitizer
bots unhappy.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@282387 91177308-0d34-0410-b5e6-96231b3b80d8
If a constant is unamed_addr and is only used within one function, we can save
on the code size and runtime cost of an indirection by changing the global's storage
to inside the constant pool. For example, instead of:
ldr r0, .CPI0
bl printf
bx lr
.CPI0: &format_string
format_string: .asciz "hello, world!\n"
We can emit:
adr r0, .CPI0
bl printf
bx lr
.CPI0: .asciz "hello, world!\n"
This can cause significant code size savings when many small strings are used in one
function (4 bytes per string).
This recommit contains fixes for a nasty bug related to fast-isel fallback - because
fast-isel doesn't know about this optimization, if it runs and emits references to
a string that we inline (because fast-isel fell back to SDAG) we will end up
with an inlined string and also an out-of-line string, and we won't emit the
out-of-line string, causing backend failures.
It also contains fixes for emitting .text relocations which made the sanitizer
bots unhappy.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@282241 91177308-0d34-0410-b5e6-96231b3b80d8
Saleem Abdulrasool