In the last half-dozen commits to LLVM I removed code that became dead
after removing the offset parameter from llvm.dbg.value gradually
proceeding from IR towards the backend. Before I can move on to
DwarfDebug and friends there is one last side-called offset I need to
remove: This patch modifies PrologEpilogInserter's use of the
DBG_VALUE's offset argument to use a DIExpression instead. Because the
PrologEpilogInserter runs at the Machine level I had to play a little
trick with a named llvm.dbg.mir node to get the DIExpressions to print
in MIR dumps (which print the llvm::Module followed by the
MachineFunction dump).
I also had to add rudimentary DwarfExpression support to CodeView and
as a side-effect also fixed a bug (CodeViewDebug::collectVariableInfo
was supposed to give up on variables with complex DIExpressions, but
would fail to do so for fragments, which are also modeled as
DIExpressions).
With this last holdover removed we will have only one canonical way of
representing offsets to debug locations which will simplify the code
in DwarfDebug (and future versions of CodeViewDebug once it starts
handling more complex expressions) and make it easier to reason about.
This patch is NFC-ish: All test case changes are for assembler
comments and the binary output does not change.
rdar://problem/33580047
Differential Revision: https://reviews.llvm.org/D36125
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@309751 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: Continuing the work from https://reviews.llvm.org/D33240, this change introduces an element unordered-atomic memset intrinsic. This intrinsic is essentially memset with the implementation requirement that all stores used for the assignment are done with unordered-atomic stores of a given element size.
Reviewers: eli.friedman, reames, mkazantsev, skatkov
Reviewed By: reames
Subscribers: jfb, dschuff, sbc100, jgravelle-google, aheejin, efriedma, llvm-commits
Differential Revision: https://reviews.llvm.org/D34885
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@307854 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: Continuing the work from https://reviews.llvm.org/D33240, this change introduces an element unordered-atomic memmove intrinsic. This intrinsic is essentially memmove with the implementation requirement that all loads/stores used for the copy are done with unordered-atomic loads/stores of a given element size.
Reviewers: eli.friedman, reames, mkazantsev, skatkov
Reviewed By: reames
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D34884
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@307796 91177308-0d34-0410-b5e6-96231b3b80d8
OpenCL 2.0 introduces the notion of memory scopes in atomic operations to
global and local memory. These scopes restrict how synchronization is
achieved, which can result in improved performance.
This change extends existing notion of synchronization scopes in LLVM to
support arbitrary scopes expressed as target-specific strings, in addition to
the already defined scopes (single thread, system).
The LLVM IR and MIR syntax for expressing synchronization scopes has changed
to use *syncscope("<scope>")*, where <scope> can be "singlethread" (this
replaces *singlethread* keyword), or a target-specific name. As before, if
the scope is not specified, it defaults to CrossThread/System scope.
Implementation details:
- Mapping from synchronization scope name/string to synchronization scope id
is stored in LLVM context;
- CrossThread/System and SingleThread scopes are pre-defined to efficiently
check for known scopes without comparing strings;
- Synchronization scope names are stored in SYNC_SCOPE_NAMES_BLOCK in
the bitcode.
Differential Revision: https://reviews.llvm.org/D21723
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@307722 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Background: http://lists.llvm.org/pipermail/llvm-dev/2017-May/112779.html
This change is to alter the prototype for the atomic memcpy intrinsic. The prototype itself is being changed to more closely resemble the semantics and parameters of the llvm.memcpy intrinsic -- to ease later combination of the llvm.memcpy and atomic memcpy intrinsics. Furthermore, the name of the atomic memcpy intrinsic is being changed to make it clear that it is not a generic atomic memcpy, but specifically a memcpy is unordered atomic.
Reviewers: reames, sanjoy, efriedma
Reviewed By: reames
Subscribers: mzolotukhin, anna, llvm-commits, skatkov
Differential Revision: https://reviews.llvm.org/D33240
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@305558 91177308-0d34-0410-b5e6-96231b3b80d8
This creates a new library called BinaryFormat that has all of
the headers from llvm/Support containing structure and layout
definitions for various types of binary formats like dwarf, coff,
elf, etc as well as the code for identifying a file from its
magic.
Differential Revision: https://reviews.llvm.org/D33843
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@304864 91177308-0d34-0410-b5e6-96231b3b80d8
I did this a long time ago with a janky python script, but now
clang-format has built-in support for this. I fed clang-format every
line with a #include and let it re-sort things according to the precise
LLVM rules for include ordering baked into clang-format these days.
I've reverted a number of files where the results of sorting includes
isn't healthy. Either places where we have legacy code relying on
particular include ordering (where possible, I'll fix these separately)
or where we have particular formatting around #include lines that
I didn't want to disturb in this patch.
This patch is *entirely* mechanical. If you get merge conflicts or
anything, just ignore the changes in this patch and run clang-format
over your #include lines in the files.
Sorry for any noise here, but it is important to keep these things
stable. I was seeing an increasing number of patches with irrelevant
re-ordering of #include lines because clang-format was used. This patch
at least isolates that churn, makes it easy to skip when resolving
conflicts, and gets us to a clean baseline (again).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@304787 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Before this change, AttributeLists stored a pair of index and
AttributeSet. This is memory efficient if most arguments do not have
attributes. However, it requires doing a search over the pairs to test
an argument or function attribute. Profiling shows that this loop was
0.76% of the time in 'opt -O2' of sqlite3.c, because LLVM constantly
tests values for nullability.
This was worth about 2.5% of mid-level optimization cycles on the
sqlite3 amalgamation. Here are the full perf results:
https://reviews.llvm.org/P7995
Here are just the before and after cycle counts:
```
$ perf stat -r 5 ./opt_before -O2 sqlite3.bc -o /dev/null
13,274,181,184 cycles # 3.047 GHz ( +- 0.28% )
$ perf stat -r 5 ./opt_after -O2 sqlite3.bc -o /dev/null
12,906,927,263 cycles # 3.043 GHz ( +- 0.51% )
```
This patch *does not* change the indices used to query attributes, as
requested by reviewers. Tracking whether an index is usable for array
indexing is a huge pain that affects many of the internal APIs, so it
would be good to come back later and do a cleanup to remove this
internal adjustment.
Reviewers: pete, chandlerc
Subscribers: javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D32819
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@303654 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Add Max ModFlagBehavior, which can be used to take the max of two
module flag values when merging modules. Use it for the PIE and PIC
levels.
This avoids an error when we try to import from a module built -fpic
into a module built -fPIC, for example. For both PIE and PIC levels,
this will be legal, since the code generation gets more conservative
as the level is increased. Therefore we can take the max instead of
somehow trying to block importing between modules compiled with
different levels.
Reviewers: tmsriram, pcc
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D33418
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@303590 91177308-0d34-0410-b5e6-96231b3b80d8
As recently discussed on llvm-dev [1], this patch makes it illegal for
two Functions to point to the same DISubprogram and updates
FunctionCloner to also clone the debug info of a function to conform
to the new requirement. To simplify the implementation it also factors
out the creation of inlineAt locations from the Inliner into a
general-purpose utility in DILocation.
[1] http://lists.llvm.org/pipermail/llvm-dev/2017-May/112661.html
<rdar://problem/31926379>
Differential Revision: https://reviews.llvm.org/D32975
This reapplies r302469 with a fix for a bot failure (reparentDebugInfo
now checks for the case the orig and new function are identical).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@302576 91177308-0d34-0410-b5e6-96231b3b80d8
This caused PR32977.
Original commit message:
> Make it illegal for two Functions to point to the same DISubprogram
>
> As recently discussed on llvm-dev [1], this patch makes it illegal for
> two Functions to point to the same DISubprogram and updates
> FunctionCloner to also clone the debug info of a function to conform
> to the new requirement. To simplify the implementation it also factors
> out the creation of inlineAt locations from the Inliner into a
> general-purpose utility in DILocation.
>
> [1] http://lists.llvm.org/pipermail/llvm-dev/2017-May/112661.html
> <rdar://problem/31926379>
>
> Differential Revision: https://reviews.llvm.org/D32975
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@302533 91177308-0d34-0410-b5e6-96231b3b80d8
As recently discussed on llvm-dev [1], this patch makes it illegal for
two Functions to point to the same DISubprogram and updates
FunctionCloner to also clone the debug info of a function to conform
to the new requirement. To simplify the implementation it also factors
out the creation of inlineAt locations from the Inliner into a
general-purpose utility in DILocation.
[1] http://lists.llvm.org/pipermail/llvm-dev/2017-May/112661.html
<rdar://problem/31926379>
Differential Revision: https://reviews.llvm.org/D32975
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@302469 91177308-0d34-0410-b5e6-96231b3b80d8
The method is called "get *Param* Alignment", and is only used for
return values exactly once, so it should take argument indices, not
attribute indices.
Avoids confusing code like:
IsSwiftError = CS->paramHasAttr(ArgIdx, Attribute::SwiftError);
Alignment = CS->getParamAlignment(ArgIdx + 1);
Add getRetAlignment to handle the one case in Value.cpp that wants the
return value alignment.
This is a potentially breaking change for out-of-tree backends that do
their own call lowering.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@301682 91177308-0d34-0410-b5e6-96231b3b80d8
For Swift we would like to be able to encode the error types that a
function may throw, so the debugger can display them alongside the
function's return value when finish-ing a function.
DWARF defines DW_TAG_thrown_type (intended to be used for C++ throw()
declarations) that is a perfect fit for this purpose. This patch wires
up support for DW_TAG_thrown_type in LLVM by adding a list of thrown
types to DISubprogram.
To offset the cost of the extra pointer, there is a follow-up patch
that turns DISubprogram into a variable-length node.
rdar://problem/29481673
Differential Revision: https://reviews.llvm.org/D32559
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@301489 91177308-0d34-0410-b5e6-96231b3b80d8
This avoids the confusing 'CS.paramHasAttr(ArgNo + 1, Foo)' pattern.
Previously we were testing return value attributes with index 0, so I
introduced hasReturnAttr() for that use case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@300367 91177308-0d34-0410-b5e6-96231b3b80d8
Now that we have a type that can represent the attributes on a single
return, function, or parameter, we can pass it around directly rather
than passing around AttributeList and Idx. Removes some more one-based
argument attribute index counting.
NFC
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@300285 91177308-0d34-0410-b5e6-96231b3b80d8
Add hasParamAttribute() and use it instead of hasAttribute(ArgNo+1,
Kind) everywhere.
The fact that the AttributeList index for an argument is ArgNo+1 should
be a hidden implementation detail.
NFC
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@300272 91177308-0d34-0410-b5e6-96231b3b80d8
LLVM makes several assumptions about address space 0. However,
alloca is presently constrained to always return this address space.
There's no real way to avoid using alloca, so without this
there is no way to opt out of these assumptions.
The problematic assumptions include:
- That the pointer size used for the stack is the same size as
the code size pointer, which is also the maximum sized pointer.
- That 0 is an invalid, non-dereferencable pointer value.
These are problems for AMDGPU because alloca is used to
implement the private address space, which uses a 32-bit
index as the pointer value. Other pointers are 64-bit
and behave more like LLVM's notion of generic address
space. By changing the address space used for allocas,
we can change our generic pointer type to be LLVM's generic
pointer type which does have similar properties.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@299888 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This class is a list of AttributeSetNodes corresponding the function
prototype of a call or function declaration. This class used to be
called ParamAttrListPtr, then AttrListPtr, then AttributeSet. It is
typically accessed by parameter and return value index, so
"AttributeList" seems like a more intuitive name.
Rename AttributeSetImpl to AttributeListImpl to follow suit.
It's useful to rename this class so that we can rename AttributeSetNode
to AttributeSet later. AttributeSet is the set of attributes that apply
to a single function, argument, or return value.
Reviewers: sanjoy, javed.absar, chandlerc, pete
Reviewed By: pete
Subscribers: pete, jholewinski, arsenm, dschuff, mehdi_amini, jfb, nhaehnle, sbc100, void, llvm-commits
Differential Revision: https://reviews.llvm.org/D31102
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@298393 91177308-0d34-0410-b5e6-96231b3b80d8
Conflicting debug info for function arguments causes hard-to-debug
assertions in the DWARF backend, so the Verifier should reject it.
For performance reasons this only checks function arguments from
non-inlined debug intrinsics for now.
rdar://problem/30520286
This reapplies r295749 after fixing PR32042.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@296543 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: For SamplePGO, the profile may contain cross-module inline stacks. As we need to make sure the profile annotation happens when all the hot inline stacks are expanded, we need to pass this info to the module importer so that it can import proper functions if necessary. This patch implemented this feature by emitting cross-module targets as part of function entry metadata. In the module-summary phase, the metadata is used to build call edges that points to functions need to be imported.
Reviewers: mehdi_amini, tejohnson
Reviewed By: tejohnson
Subscribers: davidxl, llvm-commits
Differential Revision: https://reviews.llvm.org/D30053
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@296498 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r295749 while investigating PR32042.
It looks like this check uncovered a problem in the frontend that
needs to be fixed before the check can be enabled again.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@296005 91177308-0d34-0410-b5e6-96231b3b80d8
Conflicting debug info for function arguments causes hard-to-debug
assertions in the DWARF backend, so the Verifier should reject it.
For performance reasons this only checks function arguments from
non-inlined debug intrinsics for now.
rdar://problem/30520286
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@295749 91177308-0d34-0410-b5e6-96231b3b80d8
Before this patch we happened to visit twice, one when scanning
MDNodes and the other one while visiting the function. Remove
the explicit call to visitDISubprogram there, so we don't emit
the same error twice in case the verifier fail and we save some
time when running it.
Thanks to Justin Bogner for the report and Adrian for the quick
review!
PR: 31995
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@295537 91177308-0d34-0410-b5e6-96231b3b80d8
A line number doesn't make much sense if you don't say where it's
from. Add a verifier check for this and update some tests that had
bogus debug info.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@295516 91177308-0d34-0410-b5e6-96231b3b80d8
This commit introduces a set of experimental intrinsics intended to prevent
optimizations that make assumptions about the rounding mode and floating point
exception behavior. These intrinsics will later be extended to specify
flush-to-zero behavior. More work is also required to model instruction
dependencies in machine code and to generate these instructions from clang
(when required by pragmas and/or command line options that are not currently
supported).
Differential Revision: https://reviews.llvm.org/D27028
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@293226 91177308-0d34-0410-b5e6-96231b3b80d8
This fixes the issue exposed in PR31393, where we weren't trying
sufficiently hard to diagnose bad TBAA metadata.
This does reduce the variety in the error messages we print out, but I
think the tradeoff of verifying more, simply and quickly overrules the
need for more helpful error messags here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@290713 91177308-0d34-0410-b5e6-96231b3b80d8
This change adds a new intrinsic which is intended to provide memcpy functionality
with additional atomicity guarantees. Please refer to the review thread
or language reference for further details.
Differential Revision: https://reviews.llvm.org/D27133
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@290708 91177308-0d34-0410-b5e6-96231b3b80d8
